MODULE_DEVICE_TABLE(usb, rtl8192_usb_id_tbl);
MODULE_DESCRIPTION("Linux driver for Realtek RTL8192 USB WiFi cards");
-static char* ifname = "wlan%d";
+static char *ifname = "wlan%d";
static int hwwep = 1; //default use hw. set 0 to use software security
static int channels = 0x3fff;
{{1,2,3,4,5,6,7,8,9,10,11,12,13,14},14} //For Global Domain. 1-11:active scan, 12-14 passive scan. //+YJ, 080626
};
-static void rtl819x_set_channel_map(u8 channel_plan, struct r8192_priv* priv)
+static void rtl819x_set_channel_map(u8 channel_plan, struct r8192_priv *priv)
{
int i, max_chan=-1, min_chan=-1;
- struct ieee80211_device* ieee = priv->ieee80211;
+ struct ieee80211_device *ieee = priv->ieee80211;
switch (channel_plan)
{
case COUNTRY_CODE_FCC:
void print_buffer(u32 *buffer, int len)
{
int i;
- u8 *buf =(u8*)buffer;
+ u8 *buf =(u8 *)buffer;
printk("ASCII BUFFER DUMP (len: %x):\n",len);
+ pstats->RxBufShift);
}
-static int rtl8192_rx_initiate(struct net_device*dev)
+static int rtl8192_rx_initiate(struct net_device *dev)
{
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
struct urb *entry;
static void rtl8192_tx_isr(struct urb *tx_urb)
{
- struct sk_buff *skb = (struct sk_buff*)tx_urb->context;
+ struct sk_buff *skb = (struct sk_buff *)tx_urb->context;
struct net_device *dev = NULL;
struct r8192_priv *priv = NULL;
cb_desc *tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
// bool bToSend0Byte;
// u16 BufLen = skb->len;
- memcpy(&dev,(struct net_device*)(skb->cb),sizeof(struct net_device*));
+ memcpy(&dev,(struct net_device *)(skb->cb),sizeof(struct net_device *));
priv = ieee80211_priv(dev);
if(tcb_desc->queue_index != TXCMD_QUEUE) {
}
}
-void rtl8192_config_rate(struct net_device* dev, u16* rate_config)
+void rtl8192_config_rate(struct net_device *dev, u16 *rate_config)
{
struct r8192_priv *priv = ieee80211_priv(dev);
struct ieee80211_network *net;
#define SHORT_SLOT_TIME 9
#define NON_SHORT_SLOT_TIME 20
-void rtl8192_update_cap(struct net_device* dev, u16 cap)
+void rtl8192_update_cap(struct net_device *dev, u16 cap)
{
u32 tmp = 0;
struct r8192_priv *priv = ieee80211_priv(dev);
rtl8192_config_rate(dev, &rate_config);
priv->basic_rate = rate_config &= 0x15f;
- write_nic_dword(dev,BSSIDR,((u32*)net->bssid)[0]);
- write_nic_word(dev,BSSIDR+4,((u16*)net->bssid)[2]);
+ write_nic_dword(dev,BSSIDR,((u32 *)net->bssid)[0]);
+ write_nic_word(dev,BSSIDR+4,((u16 *)net->bssid)[2]);
//for(i=0;i<ETH_ALEN;i++)
// write_nic_byte(dev,BSSID+i,net->bssid[i]);
usb_free_urb(tx_cmd_urb);
}
-unsigned int txqueue2outpipe(struct r8192_priv* priv,unsigned int tx_queue) {
+unsigned int txqueue2outpipe(struct r8192_priv *priv,unsigned int tx_queue) {
if(tx_queue >= 9)
{
* skb->cb will contain all the following information,
* priority, morefrag, rate, &dev.
* */
-short rtl8192_tx(struct net_device *dev, struct sk_buff* skb)
+short rtl8192_tx(struct net_device *dev, struct sk_buff *skb)
{
struct r8192_priv *priv = ieee80211_priv(dev);
cb_desc *tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
}
#endif
- memset(priv->rx_urb, 0, sizeof(struct urb*) * MAX_RX_URB);
+ memset(priv->rx_urb, 0, sizeof(struct urb *) * MAX_RX_URB);
priv->pp_rxskb = kcalloc(MAX_RX_URB, sizeof(struct sk_buff *),
GFP_KERNEL);
if (!priv->pp_rxskb) {
}
#endif
-extern void rtl8192_update_ratr_table(struct net_device* dev);
+extern void rtl8192_update_ratr_table(struct net_device *dev);
void rtl8192_link_change(struct net_device *dev)
{
// int i;
struct r8192_priv *priv = ieee80211_priv(dev);
- struct ieee80211_device* ieee = priv->ieee80211;
+ struct ieee80211_device *ieee = priv->ieee80211;
//write_nic_word(dev, BCN_INTR_ITV, net->beacon_interval);
if (ieee->state == IEEE80211_LINKED)
{
};
-void rtl8192_update_beacon(struct work_struct * work)
+void rtl8192_update_beacon(struct work_struct *work)
{
struct r8192_priv *priv = container_of(work, struct r8192_priv, update_beacon_wq.work);
struct net_device *dev = priv->ieee80211->dev;
- struct ieee80211_device* ieee = priv->ieee80211;
- struct ieee80211_network* net = &ieee->current_network;
+ struct ieee80211_device *ieee = priv->ieee80211;
+ struct ieee80211_network *net = &ieee->current_network;
if (ieee->pHTInfo->bCurrentHTSupport)
HTUpdateSelfAndPeerSetting(ieee, net);
* background support to run QoS activate functionality
*/
int WDCAPARA_ADD[] = {EDCAPARA_BE,EDCAPARA_BK,EDCAPARA_VI,EDCAPARA_VO};
-void rtl8192_qos_activate(struct work_struct * work)
+void rtl8192_qos_activate(struct work_struct *work)
{
struct r8192_priv *priv = container_of(work, struct r8192_priv, qos_activate);
struct net_device *dev = priv->ieee80211->dev;
}
/* handle and manage frame from beacon and probe response */
-static int rtl8192_handle_beacon(struct net_device * dev,
- struct ieee80211_beacon * beacon,
- struct ieee80211_network * network)
+static int rtl8192_handle_beacon(struct net_device *dev,
+ struct ieee80211_beacon *beacon,
+ struct ieee80211_network *network)
{
struct r8192_priv *priv = ieee80211_priv(dev);
}
-void rtl8192_update_ratr_table(struct net_device* dev)
+void rtl8192_update_ratr_table(struct net_device *dev)
// POCTET_STRING posLegacyRate,
// u8* pMcsRate)
// PRT_WLAN_STA pEntry)
{
- struct r8192_priv* priv = ieee80211_priv(dev);
- struct ieee80211_device* ieee = priv->ieee80211;
- u8* pMcsRate = ieee->dot11HTOperationalRateSet;
+ struct r8192_priv *priv = ieee80211_priv(dev);
+ struct ieee80211_device *ieee = priv->ieee80211;
+ u8 *pMcsRate = ieee->dot11HTOperationalRateSet;
//struct ieee80211_network *net = &ieee->current_network;
u32 ratr_value = 0;
u8 rate_index = 0;
- rtl8192_config_rate(dev, (u16*)(&ratr_value));
- ratr_value |= (*(u16*)(pMcsRate)) << 12;
+ rtl8192_config_rate(dev, (u16 *)(&ratr_value));
+ ratr_value |= (*(u16 *)(pMcsRate)) << 12;
// switch (net->mode)
switch (ieee->mode)
{
static u8 ccmp_ie[4] = {0x00,0x50,0xf2,0x04};
static u8 ccmp_rsn_ie[4] = {0x00, 0x0f, 0xac, 0x04};
-bool GetNmodeSupportBySecCfg8192(struct net_device*dev)
+bool GetNmodeSupportBySecCfg8192(struct net_device *dev)
{
- struct r8192_priv* priv = ieee80211_priv(dev);
- struct ieee80211_device* ieee = priv->ieee80211;
- struct ieee80211_network * network = &ieee->current_network;
+ struct r8192_priv *priv = ieee80211_priv(dev);
+ struct ieee80211_device *ieee = priv->ieee80211;
+ struct ieee80211_network *network = &ieee->current_network;
int wpa_ie_len= ieee->wpa_ie_len;
- struct ieee80211_crypt_data* crypt;
+ struct ieee80211_crypt_data *crypt;
int encrypt;
crypt = ieee->crypt[ieee->tx_keyidx];
return true;
}
-bool GetHalfNmodeSupportByAPs819xUsb(struct net_device* dev)
+bool GetHalfNmodeSupportByAPs819xUsb(struct net_device *dev)
{
bool Reval;
- struct r8192_priv* priv = ieee80211_priv(dev);
- struct ieee80211_device* ieee = priv->ieee80211;
+ struct r8192_priv *priv = ieee80211_priv(dev);
+ struct ieee80211_device *ieee = priv->ieee80211;
if(ieee->bHalfWirelessN24GMode == true)
Reval = true;
return Reval;
}
-void rtl8192_refresh_supportrate(struct r8192_priv* priv)
+void rtl8192_refresh_supportrate(struct r8192_priv *priv)
{
- struct ieee80211_device* ieee = priv->ieee80211;
+ struct ieee80211_device *ieee = priv->ieee80211;
//we do not consider set support rate for ABG mode, only HT MCS rate is set here.
if (ieee->mode == WIRELESS_MODE_N_24G || ieee->mode == WIRELESS_MODE_N_5G)
{
return;
}
-u8 rtl8192_getSupportedWireleeMode(struct net_device*dev)
+u8 rtl8192_getSupportedWireleeMode(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
u8 ret = 0;
}
return ret;
}
-void rtl8192_SetWirelessMode(struct net_device* dev, u8 wireless_mode)
+void rtl8192_SetWirelessMode(struct net_device *dev, u8 wireless_mode)
{
struct r8192_priv *priv = ieee80211_priv(dev);
u8 bSupportMode = rtl8192_getSupportedWireleeMode(dev);
}
//init priv variables here. only non_zero value should be initialized here.
-static void rtl8192_init_priv_variable(struct net_device* dev)
+static void rtl8192_init_priv_variable(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
u8 i;
}
//init lock here
-static void rtl8192_init_priv_lock(struct r8192_priv* priv)
+static void rtl8192_init_priv_lock(struct r8192_priv *priv)
{
spin_lock_init(&priv->tx_lock);
spin_lock_init(&priv->irq_lock);//added by thomas
void rtl8192_irq_rx_tasklet(struct r8192_priv *priv);
//init tasklet and wait_queue here. only 2.6 above kernel is considered
#define DRV_NAME "wlan0"
-static void rtl8192_init_priv_task(struct net_device* dev)
+static void rtl8192_init_priv_task(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
(unsigned long)priv);
}
-static void rtl8192_get_eeprom_size(struct net_device* dev)
+static void rtl8192_get_eeprom_size(struct net_device *dev)
{
u16 curCR = 0;
struct r8192_priv *priv = ieee80211_priv(dev);
}
//used to swap endian. as ntohl & htonl are not necessary to swap endian, so use this instead.
-static inline u16 endian_swap(u16* data)
+static inline u16 endian_swap(u16 *data)
{
u16 tmp = *data;
*data = (tmp >> 8) | (tmp << 8);
return *data;
}
-static void rtl8192_read_eeprom_info(struct net_device* dev)
+static void rtl8192_read_eeprom_info(struct net_device *dev)
{
u16 wEPROM_ID = 0;
u8 bMac_Tmp_Addr[6] = {0x00, 0xe0, 0x4c, 0x00, 0x00, 0x02};
{
u16 tmp = 0;
tmp = eprom_read(dev, (u16)((EEPROM_NODE_ADDRESS_BYTE_0 + i)>>1));
- *(u16*)(&dev->dev_addr[i]) = tmp;
+ *(u16 *)(&dev->dev_addr[i]) = tmp;
}
}
else
tmpValue = eprom_read(dev, (EEPROM_TxPwIndex_CCK_V1 + 2)>>1);
else
tmpValue = 0x1010;
- *((u16*)(&priv->EEPROMTxPowerLevelCCK_V1[1])) = tmpValue;
+ *((u16 *)(&priv->EEPROMTxPowerLevelCCK_V1[1])) = tmpValue;
if (bLoad_From_EEPOM)
tmpValue = eprom_read(dev, (EEPROM_TxPwIndex_OFDM_24G_V1>>1));
else
tmpValue = 0x1010;
- *((u16*)(&priv->EEPROMTxPowerLevelOFDM24G[0])) = tmpValue;
+ *((u16 *)(&priv->EEPROMTxPowerLevelOFDM24G[0])) = tmpValue;
if (bLoad_From_EEPOM)
tmpValue = eprom_read(dev, (EEPROM_TxPwIndex_OFDM_24G_V1+2)>>1);
else
return;
}
-short rtl8192_get_channel_map(struct net_device * dev)
+short rtl8192_get_channel_map(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
if(priv->ChannelPlan > COUNTRY_CODE_GLOBAL_DOMAIN){
* return: none
* notice: This part need to modified according to the rate set we filtered
* ****************************************************************************/
-void rtl8192_hwconfig(struct net_device* dev)
+void rtl8192_hwconfig(struct net_device *dev)
{
u32 regRATR = 0, regRRSR = 0;
u8 regBwOpMode = 0, regTmp = 0;
write_nic_byte(dev, CMDR, CR_RE|CR_TE);
//set IDR0 here
- write_nic_dword(dev, MAC0, ((u32*)dev->dev_addr)[0]);
- write_nic_word(dev, MAC4, ((u16*)(dev->dev_addr + 4))[0]);
+ write_nic_dword(dev, MAC0, ((u32 *)dev->dev_addr)[0]);
+ write_nic_word(dev, MAC4, ((u16 *)(dev->dev_addr + 4))[0]);
//set RCR
write_nic_dword(dev, RCR, priv->ReceiveConfig);
}
-void rtl8192_cancel_deferred_work(struct r8192_priv* priv);
+void rtl8192_cancel_deferred_work(struct r8192_priv *priv);
int _rtl8192_up(struct net_device *dev);
int rtl8192_close(struct net_device *dev);
{
u8 EntryId = 0;
struct r8192_priv *priv = ieee80211_priv(dev);
- u8* MacAddr = priv->ieee80211->current_network.bssid;
+ u8 *MacAddr = priv->ieee80211->current_network.bssid;
static u8 CAM_CONST_ADDR[4][6] = {
{0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
4,
0,
priv->ieee80211->pairwise_key_type,
- (u8*)dev->dev_addr,
+ (u8 *)dev->dev_addr,
0,
NULL);
else
4,
0,
priv->ieee80211->pairwise_key_type,
- (u8*)dev->dev_addr,
+ (u8 *)dev->dev_addr,
0,
NULL);
else
void rtl819x_update_rxcounts(
struct r8192_priv *priv,
- u32* TotalRxBcnNum,
- u32* TotalRxDataNum
+ u32 *TotalRxBcnNum,
+ u32 *TotalRxDataNum
)
{
u16 SlotIndex;
struct delayed_work *dwork = container_of(work,struct delayed_work,work);
struct r8192_priv *priv = container_of(dwork,struct r8192_priv,watch_dog_wq);
struct net_device *dev = priv->ieee80211->dev;
- struct ieee80211_device* ieee = priv->ieee80211;
+ struct ieee80211_device *ieee = priv->ieee80211;
RESET_TYPE ResetType = RESET_TYPE_NORESET;
static u8 check_reset_cnt;
bool bBusyTraffic = false;
if (ieee->pairwise_key_type)
{
- memcpy((u8*)key, ipw->u.crypt.key, 16);
+ memcpy((u8 *)key, ipw->u.crypt.key, 16);
EnableHWSecurityConfig8192(dev);
//we fill both index entry and 4th entry for pairwise key as in IPW interface, adhoc will only get here, so we need index entry for its default key serching!
//added by WB.
- setKey(dev, 4, ipw->u.crypt.idx, ieee->pairwise_key_type, (u8*)ieee->ap_mac_addr, 0, key);
+ setKey(dev, 4, ipw->u.crypt.idx, ieee->pairwise_key_type, (u8 *)ieee->ap_mac_addr, 0, key);
if (ieee->auth_mode != 2)
- setKey(dev, ipw->u.crypt.idx, ipw->u.crypt.idx, ieee->pairwise_key_type, (u8*)ieee->ap_mac_addr, 0, key);
+ setKey(dev, ipw->u.crypt.idx, ipw->u.crypt.idx, ieee->pairwise_key_type, (u8 *)ieee->ap_mac_addr, 0, key);
}
}
else //if (ipw->u.crypt.idx) //group key use idx > 0
{
- memcpy((u8*)key, ipw->u.crypt.key, 16);
+ memcpy((u8 *)key, ipw->u.crypt.key, 16);
if (strcmp(ipw->u.crypt.alg, "CCMP") == 0)
ieee->group_key_type= KEY_TYPE_CCMP;
else if (strcmp(ipw->u.crypt.alg, "TKIP") == 0)
printk("@@ wrq->u pointer = ");
for(i=0;i<wrq->u.data.length;i++){
if(i%10==0) printk("\n");
- printk( "%8x|", ((u32*)wrq->u.data.pointer)[i] );
+ printk( "%8x|", ((u32 *)wrq->u.data.pointer)[i] );
}
printk("\n");
#endif /*JOHN_HWSEC_DEBUG*/
be a local static. Otherwise, it may increase when we return from S3/S4. The
value will be kept in memory or disk. Declare the value in the adaptor
and it will be reinitialized when returned from S3/S4. */
-void rtl8192_process_phyinfo(struct r8192_priv * priv,u8* buffer, struct ieee80211_rx_stats * pprevious_stats, struct ieee80211_rx_stats * pcurrent_stats)
+void rtl8192_process_phyinfo(struct r8192_priv *priv,u8 *buffer, struct ieee80211_rx_stats *pprevious_stats, struct ieee80211_rx_stats *pcurrent_stats)
{
bool bcheck = false;
u8 rfpath;
}
static void rtl8192_query_rxphystatus(
- struct r8192_priv * priv,
- struct ieee80211_rx_stats * pstats,
- rx_drvinfo_819x_usb * pdrvinfo,
- struct ieee80211_rx_stats * precord_stats,
+ struct r8192_priv *priv,
+ struct ieee80211_rx_stats *pstats,
+ rx_drvinfo_819x_usb *pdrvinfo,
+ struct ieee80211_rx_stats *precord_stats,
bool bpacket_match_bssid,
bool bpacket_toself,
bool bPacketBeacon,
)
{
//PRT_RFD_STATUS pRtRfdStatus = &(pRfd->Status);
- phy_sts_ofdm_819xusb_t* pofdm_buf;
- phy_sts_cck_819xusb_t * pcck_buf;
- phy_ofdm_rx_status_rxsc_sgien_exintfflag* prxsc;
+ phy_sts_ofdm_819xusb_t *pofdm_buf;
+ phy_sts_cck_819xusb_t *pcck_buf;
+ phy_ofdm_rx_status_rxsc_sgien_exintfflag *prxsc;
u8 *prxpkt;
u8 i, max_spatial_stream, tmp_rxsnr, tmp_rxevm, rxsc_sgien_exflg;
char rx_pwr[4], rx_pwr_all=0;
pstats->bPacketBeacon = precord_stats->bPacketBeacon = bPacketBeacon;
pstats->bToSelfBA = precord_stats->bToSelfBA = bToSelfBA;
- prxpkt = (u8*)pdrvinfo;
+ prxpkt = (u8 *)pdrvinfo;
/* Move pointer to the 16th bytes. Phy status start address. */
prxpkt += sizeof(rx_drvinfo_819x_usb);
void
rtl8192_record_rxdesc_forlateruse(
- struct ieee80211_rx_stats * psrc_stats,
- struct ieee80211_rx_stats * ptarget_stats
+ struct ieee80211_rx_stats *psrc_stats,
+ struct ieee80211_rx_stats *ptarget_stats
)
{
ptarget_stats->bIsAMPDU = psrc_stats->bIsAMPDU;
void TranslateRxSignalStuff819xUsb(struct sk_buff *skb,
- struct ieee80211_rx_stats * pstats,
+ struct ieee80211_rx_stats *pstats,
rx_drvinfo_819x_usb *pdrvinfo)
{
// TODO: We must only check packet for current MAC address. Not finish
// Get Signal Quality for only RX data queue (but not command queue)
- u8* tmp_buf;
+ u8 *tmp_buf;
//u16 tmp_buf_len = 0;
u8 *praddr;
/* Get MAC frame start address. */
- tmp_buf = (u8*)skb->data;// + get_rxpacket_shiftbytes_819xusb(pstats);
+ tmp_buf = (u8 *)skb->data;// + get_rxpacket_shiftbytes_819xusb(pstats);
hdr = (struct ieee80211_hdr_3addr *)tmp_buf;
fc = le16_to_cpu(hdr->frame_ctl);
+ Status->RxBufShift);
}
-void rtl8192_rx_nomal(struct sk_buff* skb)
+void rtl8192_rx_nomal(struct sk_buff *skb)
{
rtl8192_rx_info *info = (struct rtl8192_rx_info *)skb->cb;
struct net_device *dev=info->dev;
)
{
// bool bfreerfd=false, bqueued=false;
- u8* frame;
+ u8 *frame;
u16 frame_len=0;
struct r8192_priv *priv = ieee80211_priv(dev);
// u8 index = 0;
// When RF is off, we should not count the packet for hw/sw synchronize
// reason, ie. there may be a duration while sw switch is changed and hw
// switch is being changed. 2006.12.04, by shien chang.
- Adapter->HalFunc.GetHwRegHandler(Adapter, HW_VAR_RF_STATE, (u8* )(&rtState));
+ Adapter->HalFunc.GetHwRegHandler(Adapter, HW_VAR_RF_STATE, (u8 *)(&rtState));
if (rtState == eRfOff)
{
return;
//
//Get Rx Descriptor Information
//
- stats->virtual_address = (u8*)skb->data;
+ stats->virtual_address = (u8 *)skb->data;
stats->Length = desc->Length;
stats->RxDrvInfoSize = 0;
stats->RxBufShift = 0;
}
//detach all the work and timer structure declared or inititialize in r8192U_init function.
-void rtl8192_cancel_deferred_work(struct r8192_priv* priv)
+void rtl8192_cancel_deferred_work(struct r8192_priv *priv)
{
cancel_work_sync(&priv->reset_wq);
{
u8 SECR_value = 0x0;
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
- struct ieee80211_device* ieee = priv->ieee80211;
+ struct ieee80211_device *ieee = priv->ieee80211;
SECR_value = SCR_TxEncEnable | SCR_RxDecEnable;
if (((KEY_TYPE_WEP40 == ieee->pairwise_key_type) || (KEY_TYPE_WEP104 == ieee->pairwise_key_type)) && (priv->ieee80211->auth_mode != 2))
{
projects / openwrt / staging / blogic.git / commitdiff