mmc: dt: Fix typo in filename

Fix typo in the synopsis dwmmc controller dt binding filename.

Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

diff --git a/Documentation/devicetree/bindings/mmc/synopsis-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsis-dw-mshc.txt
new file mode 100644 (file)
index 0000000..06cd32d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/synopsis-dw-mshc.txt
@@ -0,0 +1,79 @@
+* Synopsis Designware Mobile Storage Host Controller
+
+The Synopsis designware mobile storage host controller is used to interface
+a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
+differences between the core mmc properties described by mmc.txt and the
+properties used by the Synopsis Designware Mobile Storage Host Controller.
+
+Required Properties:
+
+* compatible: should be
+       - snps,dw-mshc: for controllers compliant with synopsis dw-mshc.
+* #address-cells: should be 1.
+* #size-cells: should be 0.
+
+# Slots: The slot specific information are contained within child-nodes with
+  each child-node representing a supported slot. There should be atleast one
+  child node representing a card slot. The name of the child node representing
+  the slot is recommended to be slot@n where n is the unique number of the slot
+  connnected to the controller. The following are optional properties which
+  can be included in the slot child node.
+
+       * reg: specifies the physical slot number. The valid values of this
+         property is 0 to (num-slots -1), where num-slots is the value
+         specified by the num-slots property.
+
+       * bus-width: as documented in mmc core bindings.
+
+       * wp-gpios: specifies the write protect gpio line. The format of the
+         gpio specifier depends on the gpio controller. If the write-protect
+         line is not available, this property is optional.
+
+Optional properties:
+
+* num-slots: specifies the number of slots supported by the controller.
+  The number of physical slots actually used could be equal or less than the
+  value specified by num-slots. If this property is not specified, the value
+  of num-slot property is assumed to be 1.
+
+* fifo-depth: The maximum size of the tx/rx fifo's. If this property is not
+  specified, the default value of the fifo size is determined from the
+  controller registers.
+
+* card-detect-delay: Delay in milli-seconds before detecting card after card
+  insert event. The default value is 0.
+
+* supports-highspeed: Enables support for high speed cards (upto 50MHz)
+
+* broken-cd: as documented in mmc core bindings.
+
+Aliases:
+
+- All the MSHC controller nodes should be represented in the aliases node using
+  the following format 'mshc{n}' where n is a unique number for the alias.
+
+Example:
+
+The MSHC controller node can be split into two portions, SoC specific and
+board specific portions as listed below.
+
+       dwmmc0@12200000 {
+               compatible = "snps,dw-mshc";
+               reg = <0x12200000 0x1000>;
+               interrupts = <0 75 0>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+       };
+
+       dwmmc0@12200000 {
+               num-slots = <1>;
+               supports-highspeed;
+               broken-cd;
+               fifo-depth = <0x80>;
+               card-detect-delay = <200>;
+
+               slot@0 {
+                       reg = <0>;
+                       bus-width = <8>;
+               };
+       };

diff --git a/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt
deleted file mode 100644 (file)
index 06cd32d..0000000
--- a/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt
+++ /dev/null
@@ -1,79 +0,0 @@
-* Synopsis Designware Mobile Storage Host Controller
-
-The Synopsis designware mobile storage host controller is used to interface
-a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
-differences between the core mmc properties described by mmc.txt and the
-properties used by the Synopsis Designware Mobile Storage Host Controller.
-
-Required Properties:
-
-* compatible: should be
-       - snps,dw-mshc: for controllers compliant with synopsis dw-mshc.
-* #address-cells: should be 1.
-* #size-cells: should be 0.
-
-# Slots: The slot specific information are contained within child-nodes with
-  each child-node representing a supported slot. There should be atleast one
-  child node representing a card slot. The name of the child node representing
-  the slot is recommended to be slot@n where n is the unique number of the slot
-  connnected to the controller. The following are optional properties which
-  can be included in the slot child node.
-
-       * reg: specifies the physical slot number. The valid values of this
-         property is 0 to (num-slots -1), where num-slots is the value
-         specified by the num-slots property.
-
-       * bus-width: as documented in mmc core bindings.
-
-       * wp-gpios: specifies the write protect gpio line. The format of the
-         gpio specifier depends on the gpio controller. If the write-protect
-         line is not available, this property is optional.
-
-Optional properties:
-
-* num-slots: specifies the number of slots supported by the controller.
-  The number of physical slots actually used could be equal or less than the
-  value specified by num-slots. If this property is not specified, the value
-  of num-slot property is assumed to be 1.
-
-* fifo-depth: The maximum size of the tx/rx fifo's. If this property is not
-  specified, the default value of the fifo size is determined from the
-  controller registers.
-
-* card-detect-delay: Delay in milli-seconds before detecting card after card
-  insert event. The default value is 0.
-
-* supports-highspeed: Enables support for high speed cards (upto 50MHz)
-
-* broken-cd: as documented in mmc core bindings.
-
-Aliases:
-
-- All the MSHC controller nodes should be represented in the aliases node using
-  the following format 'mshc{n}' where n is a unique number for the alias.
-
-Example:
-
-The MSHC controller node can be split into two portions, SoC specific and
-board specific portions as listed below.
-
-       dwmmc0@12200000 {
-               compatible = "snps,dw-mshc";
-               reg = <0x12200000 0x1000>;
-               interrupts = <0 75 0>;
-               #address-cells = <1>;
-               #size-cells = <0>;
-       };
-
-       dwmmc0@12200000 {
-               num-slots = <1>;
-               supports-highspeed;
-               broken-cd;
-               fifo-depth = <0x80>;
-               card-detect-delay = <200>;
-
-               slot@0 {
-                       reg = <0>;
-                       bus-width = <8>;
-               };
-       };