CONFIG_CLKSRC_MMIO=y
CONFIG_CLKSRC_OF=y
CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="console=ttyS0,115200 earlyprintk"
+CONFIG_CMDLINE="console=ttyS0,115200 earlyprintk rootwait root=/dev/mmcblk0p2"
CONFIG_CMDLINE_FORCE=y
CONFIG_COMMON_CLK=y
CONFIG_COMPACTION=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_EXPERT is not set
+CONFIG_EXT4_FS=y
CONFIG_FRAME_POINTER=y
CONFIG_FRAME_WARN=2048
CONFIG_FREEZER=y
CONFIG_MMC=y
CONFIG_MMC_BLOCK=y
# CONFIG_MMC_BLOCK_BOUNCE is not set
-CONFIG_MMC_DW=y
-# CONFIG_MMC_DW_EXYNOS is not set
-# CONFIG_MMC_DW_IDMAC is not set
-CONFIG_MMC_DW_PLTFM=y
CONFIG_MMC_UNSAFE_RESUME=y
+CONFIG_MMC_SUNXI=y
CONFIG_MODULES_USE_ELF_REL=y
# CONFIG_MTD is not set
CONFIG_MULTI_IRQ_HANDLER=y
--- /dev/null
+From 665414c8e7584be7f1a30f77cf3eae177e93fd3e Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Sat, 14 Dec 2013 22:46:20 +0100
+Subject: [PATCH] ARM: dts: sun7i: Add support for mmc
+
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+---
+ arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 16 ++++++++++++
+ arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 16 ++++++++++++
+ arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 32 +++++++++++++++++++++++
+ arch/arm/boot/dts/sun7i-a20.dtsi | 34 +++++++++++++++++++++++++
+ 4 files changed, 98 insertions(+)
+
+diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+index 5c51cb8..6aef299 100644
+--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
++++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+@@ -34,7 +34,23 @@
+ };
+ };
+
++ sdc0: sdc@01c0f000 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&sdc0_pins_a>;
++ pinctrl-1 = <&mmc0_cd_pin_cubieboard2>;
++ cd-gpios = <&pio 7 1 0>; /* PH1 */
++ cd-mode = <1>;
++ status = "okay";
++ };
++
+ pinctrl@01c20800 {
++ mmc0_cd_pin_cubieboard2: mmc0_cd_pin@0 {
++ allwinner,pins = "PH1";
++ allwinner,function = "gpio_in";
++ allwinner,drive = <0>;
++ allwinner,pull = <0>;
++ };
++
+ led_pins_cubieboard2: led_pins@0 {
+ allwinner,pins = "PH20", "PH21";
+ allwinner,function = "gpio_out";
+diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+index 8a1009d..302c785 100644
+diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+index ead3013..f271db9 100644
+--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
++++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+@@ -34,7 +34,39 @@
+ };
+ };
+
++ sdc0: sdc@01c0f000 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&sdc0_pins_a>;
++ pinctrl-1 = <&mmc0_cd_pin_olinuxinom>;
++ cd-gpios = <&pio 7 1 0>; /* PH1 */
++ cd-mode = <1>;
++ status = "okay";
++ };
++
++ sdc3: sdc@01c12000 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&sdc3_pins_a>;
++ pinctrl-1 = <&mmc3_cd_pin_olinuxinom>;
++ cd-gpios = <&pio 7 11 0>; /* PH11 */
++ cd-mode = <1>;
++ status = "okay";
++ };
++
+ pinctrl@01c20800 {
++ mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 {
++ allwinner,pins = "PH1";
++ allwinner,function = "gpio_in";
++ allwinner,drive = <0>;
++ allwinner,pull = <0>;
++ };
++
++ mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 {
++ allwinner,pins = "PH11";
++ allwinner,function = "gpio_in";
++ allwinner,drive = <0>;
++ allwinner,pull = <0>;
++ };
++
+ led_pins_olinuxino: led_pins@0 {
+ allwinner,pins = "PH2";
+ allwinner,function = "gpio_out";
+diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
+index 63757c5..5f9440c 100644
+--- a/arch/arm/boot/dts/sun7i-a20.dtsi
++++ b/arch/arm/boot/dts/sun7i-a20.dtsi
+@@ -303,6 +303,26 @@
+ #size-cells = <0>;
+ };
+
++ sdc0: sdc@01c0f000 {
++ compatible = "allwinner,sun5i-mmc";
++ reg = <0x01c0f000 0x1000>;
++ clocks = <&ahb_gates 8>, <&mmc0>;
++ clock-names = "ahb", "mod";
++ interrupts = <0 32 4>;
++ bus-width = <4>;
++ status = "disabled";
++ };
++
++ sdc3: sdc@01c12000 {
++ compatible = "allwinner,sun5i-mmc";
++ reg = <0x01c12000 0x1000>;
++ clocks = <&ahb_gates 11>, <&mmc3>;
++ clock-names = "ahb", "mod";
++ interrupts = <0 35 4>;
++ bus-width = <4>;
++ status = "disabled";
++ };
++
+ pio: pinctrl@01c20800 {
+ compatible = "allwinner,sun7i-a20-pinctrl";
+ reg = <0x01c20800 0x400>;
+@@ -366,6 +386,20 @@
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
++
++ sdc0_pins_a: sdc0@0 {
++ allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
++ allwinner,function = "mmc0";
++ allwinner,drive = <3>;
++ allwinner,pull = <1>;
++ };
++
++ sdc3_pins_a: sdc3@0 {
++ allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9";
++ allwinner,function = "mmc3";
++ allwinner,drive = <3>;
++ allwinner,pull = <1>;
++ };
+ };
+
+ timer@01c20c00 {
+--
+1.8.5.1
+
--- /dev/null
+From 82cfcf4cf1329420180ef06b7aaec67928396112 Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Sat, 14 Dec 2013 22:45:39 +0100
+Subject: [PATCH] ARM: dts: sun4i: Add support for mmc
+
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+---
+ arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 16 ++++++++++++++++
+ arch/arm/boot/dts/sun4i-a10.dtsi | 16 ++++++++++++++++
+ 2 files changed, 32 insertions(+)
+
+diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+index 425a7db..d193937 100644
+--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
++++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+@@ -42,7 +42,23 @@
+ status = "okay";
+ };
+
++ sdc0: sdc@01c0f000 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&sdc0_pins_a>;
++ pinctrl-1 = <&mmc0_cd_pin_cubieboard>;
++ cd-gpios = <&pio 7 1 0>; /* PH1 */
++ cd-mode = <1>;
++ status = "okay";
++ };
++
+ pinctrl@01c20800 {
++ mmc0_cd_pin_cubieboard: mmc0_cd_pin@0 {
++ allwinner,pins = "PH1";
++ allwinner,function = "gpio_in";
++ allwinner,drive = <0>;
++ allwinner,pull = <0>;
++ };
++
+ led_pins_cubieboard: led_pins@0 {
+ allwinner,pins = "PH20", "PH21";
+ allwinner,function = "gpio_out";
+diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
+index 4dccdb0..13bccd5 100644
+--- a/arch/arm/boot/dts/sun4i-a10.dtsi
++++ b/arch/arm/boot/dts/sun4i-a10.dtsi
+@@ -306,6 +306,15 @@
+ #size-cells = <0>;
+ };
+
++ sdc0: sdc@01c0f000 {
++ compatible = "allwinner,sun4i-mmc";
++ reg = <0x01c0f000 0x1000>;
++ clocks = <&ahb_gates 8>, <&mmc0>;
++ interrupts = <32>;
++ bus-width = <4>;
++ status = "disabled";
++ };
++
+ intc: interrupt-controller@01c20400 {
+ compatible = "allwinner,sun4i-ic";
+ reg = <0x01c20400 0x400>;
+@@ -376,6 +385,13 @@
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
++
++ sdc0_pins_a: sdc0@0 {
++ allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
++ allwinner,function = "mmc0";
++ allwinner,drive = <3>;
++ allwinner,pull = <1>;
++ };
+ };
+
+ timer@01c20c00 {
+--
+1.8.5.1
+
--- /dev/null
+From 36e4afca857c8b57bd661135d173bdf65b348f78 Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Sat, 14 Dec 2013 16:20:55 +0100
+Subject: [PATCH] ARM: dts: sun5i: Add mmc support
+
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+---
+ arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 32 ++++++++++++++++++++++
+ arch/arm/boot/dts/sun5i-a10s.dtsi | 34 ++++++++++++++++++++++++
+ arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts | 16 +++++++++++
+ arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 16 +++++++++++
+ arch/arm/boot/dts/sun5i-a13.dtsi | 17 ++++++++++++
+ 5 files changed, 115 insertions(+)
+
+diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
+index 3c9f8b3..e53fb12 100644
+--- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
++++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
+@@ -34,7 +34,39 @@
+ };
+ };
+
++ sdc0: sdc@01c0f000 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&sdc0_pins_a>;
++ pinctrl-1 = <&mmc0_cd_pin_olinuxino_micro>;
++ cd-gpios = <&pio 6 1 0>; /* PG1 */
++ cd-mode = <1>;
++ status = "okay";
++ };
++
++ sdc1: sdc@01c10000 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&sdc1_pins_a>;
++ pinctrl-1 = <&mmc1_cd_pin_olinuxino_micro>;
++ cd-gpios = <&pio 6 13 0>; /* PG13 */
++ cd-mode = <1>;
++ status = "okay";
++ };
++
+ pinctrl@01c20800 {
++ mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 {
++ allwinner,pins = "PG1";
++ allwinner,function = "gpio_in";
++ allwinner,drive = <0>;
++ allwinner,pull = <0>;
++ };
++
++ mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 {
++ allwinner,pins = "PG13";
++ allwinner,function = "gpio_in";
++ allwinner,drive = <0>;
++ allwinner,pull = <0>;
++ };
++
+ led_pins_olinuxino: led_pins@0 {
+ allwinner,pins = "PE3";
+ allwinner,function = "gpio_out";
+diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
+index 83e183c..fdbc290 100644
+--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
++++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
+@@ -274,6 +274,26 @@
+ #size-cells = <0>;
+ };
+
++ sdc0: sdc@01c0f000 {
++ compatible = "allwinner,sun5i-mmc";
++ reg = <0x01c0f000 0x1000>;
++ clocks = <&ahb_gates 8>, <&mmc0>;
++ clock-names = "ahb", "mod";
++ interrupts = <32>;
++ bus-width = <4>;
++ status = "disabled";
++ };
++
++ sdc1: sdc@01c10000 {
++ compatible = "allwinner,sun5i-mmc";
++ reg = <0x01c10000 0x1000>;
++ clocks = <&ahb_gates 9>, <&mmc1>;
++ clock-names = "ahb", "mod";
++ interrupts = <33>;
++ bus-width = <4>;
++ status = "disabled";
++ };
++
+ intc: interrupt-controller@01c20400 {
+ compatible = "allwinner,sun4i-ic";
+ reg = <0x01c20400 0x400>;
+@@ -344,6 +364,20 @@
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
++
++ sdc0_pins_a: sdc0@0 {
++ allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
++ allwinner,function = "mmc0";
++ allwinner,drive = <3>;
++ allwinner,pull = <1>;
++ };
++
++ sdc1_pins_a: sdc1@0 {
++ allwinner,pins = "PG3","PG4","PG5","PG6","PG7","PG8";
++ allwinner,function = "mmc1";
++ allwinner,drive = <3>;
++ allwinner,pull = <1>;
++ };
+ };
+
+ timer@01c20c00 {
+diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
+index fe2ce0a..fbd4e7d 100644
+--- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
++++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
+@@ -20,7 +20,23 @@
+ compatible = "olimex,a13-olinuxino-micro", "allwinner,sun5i-a13";
+
+ soc@01c00000 {
++ sdc0: sdc@01c0f000 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&sdc0_pins_a>;
++ pinctrl-1 = <&mmc0_cd_pin_olinuxinom>;
++ cd-gpios = <&pio 6 0 0>; /* PG0 */
++ cd-mode = <1>;
++ status = "okay";
++ };
++
+ pinctrl@01c20800 {
++ mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 {
++ allwinner,pins = "PG0";
++ allwinner,function = "gpio_in";
++ allwinner,drive = <0>;
++ allwinner,pull = <0>;
++ };
++
+ led_pins_olinuxinom: led_pins@0 {
+ allwinner,pins = "PG9";
+ allwinner,function = "gpio_out";
+diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
+index 9e508dc..ce22c81 100644
+--- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
++++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
+@@ -23,7 +23,23 @@
+ };
+
+ soc@01c00000 {
++ sdc0: sdc@01c0f000 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&sdc0_pins_a>;
++ pinctrl-1 = <&mmc0_cd_pin_olinuxino>;
++ cd-gpios = <&pio 6 0 0>; /* PG0 */
++ cd-mode = <1>;
++ status = "okay";
++ };
++
+ pinctrl@01c20800 {
++ mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 {
++ allwinner,pins = "PG0";
++ allwinner,function = "gpio_in";
++ allwinner,drive = <0>;
++ allwinner,pull = <0>;
++ };
++
+ led_pins_olinuxino: led_pins@0 {
+ allwinner,pins = "PG9";
+ allwinner,function = "gpio_out";
+diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
+index 0bb4300..0ca0819 100644
+--- a/arch/arm/boot/dts/sun5i-a13.dtsi
++++ b/arch/arm/boot/dts/sun5i-a13.dtsi
+@@ -255,6 +255,16 @@
+ #size-cells = <1>;
+ ranges;
+
++ sdc0: sdc@01c0f000 {
++ compatible = "allwinner,sun5i-mmc";
++ reg = <0x01c0f000 0x1000>;
++ clocks = <&ahb_gates 8>, <&mmc0>;
++ clock-names = "ahb", "mod";
++ interrupts = <32>;
++ bus-width = <4>;
++ status = "disabled";
++ };
++
+ intc: interrupt-controller@01c20400 {
+ compatible = "allwinner,sun4i-ic";
+ reg = <0x01c20400 0x400>;
+@@ -307,6 +317,13 @@
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
++
++ sdc0_pins_a: sdc0@0 {
++ allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
++ allwinner,function = "mmc0";
++ allwinner,drive = <3>;
++ allwinner,pull = <1>;
++ };
+ };
+
+ timer@01c20c00 {
+--
+1.8.5.1
+
--- /dev/null
+From 447675f817b95881e9922f002de3fc7f6d6e9207 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?David=20Lanzend=C3=B6rfer?= <david.lanzendoerfer@o2s.ch>
+Date: Fri, 6 Sep 2013 22:34:33 +0200
+Subject: [PATCH] ARM: sunxi-mci: Add driver for SD/MMC hosts found within
+ Allwinner A1X SoCs
+
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+---
+ drivers/mmc/host/Kconfig | 8 +
+ drivers/mmc/host/Makefile | 2 +
+ drivers/mmc/host/sunxi-mci.c | 1056 ++++++++++++++++++++++++++++++++++++++++++
+ drivers/mmc/host/sunxi-mci.h | 334 +++++++++++++
+ 4 files changed, 1400 insertions(+)
+ create mode 100644 drivers/mmc/host/sunxi-mci.c
+ create mode 100644 drivers/mmc/host/sunxi-mci.h
+
+diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
+index 7fc5099..0df0322 100644
+--- a/drivers/mmc/host/Kconfig
++++ b/drivers/mmc/host/Kconfig
+@@ -665,3 +665,11 @@ config MMC_REALTEK_PCI
+ help
+ Say Y here to include driver code to support SD/MMC card interface
+ of Realtek PCI-E card reader
++
++config MMC_SUNXI
++ tristate "Allwinner A1X SD/MMC Host Controller support"
++ depends on ARCH_SUNXI
++ default y
++ help
++ This selects support for the SD/MMC Host Controller on
++ Allwinner A1X based SoCs.
+diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
+index c41d0c3..f76f783 100644
+--- a/drivers/mmc/host/Makefile
++++ b/drivers/mmc/host/Makefile
+@@ -52,6 +52,8 @@ obj-$(CONFIG_MMC_WMT) += wmt-sdmmc.o
+
+ obj-$(CONFIG_MMC_REALTEK_PCI) += rtsx_pci_sdmmc.o
+
++obj-$(CONFIG_MMC_SUNXI) += sunxi-mci.o
++
+ obj-$(CONFIG_MMC_SDHCI_PLTFM) += sdhci-pltfm.o
+ obj-$(CONFIG_MMC_SDHCI_CNS3XXX) += sdhci-cns3xxx.o
+ obj-$(CONFIG_MMC_SDHCI_ESDHC_IMX) += sdhci-esdhc-imx.o
+diff --git a/drivers/mmc/host/sunxi-mci.c b/drivers/mmc/host/sunxi-mci.c
+new file mode 100644
+index 0000000..cbde1d3
+diff --git a/drivers/mmc/host/sunxi-mci.h b/drivers/mmc/host/sunxi-mci.h
+new file mode 100644
+index 0000000..0f5f95c
+\ No newline at end of file
+--
+1.8.5.1
+
--- /dev/null
+From 518dfd76baef66d0ef4c256fc0f72ea06d6be8cc Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Sun, 15 Dec 2013 19:44:01 +0100
+Subject: [PATCH] ARM: sunxi: clk: export clk_sunxi_mmc_phase_control
+
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+---
+ include/linux/clk/sunxi.h | 22 ++++++++++++++++++++++
+ 1 file changed, 22 insertions(+)
+ create mode 100644 include/linux/clk/sunxi.h
+
+diff --git a/include/linux/clk/sunxi.h b/include/linux/clk/sunxi.h
+new file mode 100644
+index 0000000..1ef5c89
+--- /dev/null
++++ b/include/linux/clk/sunxi.h
+@@ -0,0 +1,22 @@
++/*
++ * Copyright 2013 - Hans de Goede <hdegoede@redhat.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#ifndef __LINUX_CLK_SUNXI_H_
++#define __LINUX_CLK_SUNXI_H_
++
++#include <linux/clk.h>
++
++void clk_sunxi_mmc_phase_control(struct clk_hw *hw, u8 sample, u8 output);
++
++#endif
+--
+1.8.5.1
+
--- /dev/null
+From e074907f73e0bc70740901fb4a05fdf5fc81b3ff Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <emilio@elopez.com.ar>
+Date: Fri, 20 Sep 2013 20:29:17 -0300
+Subject: [PATCH] clk: sunxi: Implement MMC phase control
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Emilio López <emilio@elopez.com.ar>
+---
+ drivers/clk/sunxi/clk-sunxi.c | 35 +++++++++++++++++++++++++++++++++++
+ 1 file changed, 35 insertions(+)
+
+diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
+index 360d705..d2b8d3c 100644
+--- a/drivers/clk/sunxi/clk-sunxi.c
++++ b/drivers/clk/sunxi/clk-sunxi.c
+@@ -352,6 +352,41 @@ static void sun4i_get_mod0_factors(u32 *freq, u32 parent_rate,
+
+
+ /**
++ * clk_sunxi_mmc_phase_control() - configures MMC clock phase control
++ */
++
++void clk_sunxi_mmc_phase_control(struct clk_hw *hw, u8 sample, u8 output)
++{
++ #define to_clk_composite(_hw) container_of(_hw, struct clk_composite, hw)
++ #define to_clk_factors(_hw) container_of(_hw, struct clk_factors, hw)
++
++ struct clk_composite *composite = to_clk_composite(hw);
++ struct clk_hw *rate_hw = composite->rate_hw;
++ struct clk_factors *factors = to_clk_factors(rate_hw);
++ unsigned long flags = 0;
++ u32 reg;
++
++ if (factors->lock)
++ spin_lock_irqsave(factors->lock, flags);
++
++ reg = readl(factors->reg);
++
++ /* set sample clock phase control */
++ reg &= ~(0x7 << 20);
++ reg |= ((sample & 0x7) << 20);
++
++ /* set output clock phase control */
++ reg &= ~(0x7 << 8);
++ reg |= ((output & 0x7) << 8);
++
++ writel(reg, factors->reg);
++
++ if (factors->lock)
++ spin_unlock_irqrestore(factors->lock, flags);
++}
++
++
++/**
+ * sunxi_factors_clk_setup() - Setup function for factor clocks
+ */
+
+--
+1.8.5.1
+
--- /dev/null
+diff -ruN old/arch/arm/boot/dts/sun4i-a10.dtsi new/arch/arm/boot/dts/sun4i-a10.dtsi
+--- old/arch/arm/boot/dts/sun4i-a10.dtsi 2014-01-04 01:59:34.000000000 +0100
++++ new/arch/arm/boot/dts/sun4i-a10.dtsi 2014-01-04 01:54:00.000000000 +0100
+@@ -323,6 +323,7 @@
+ compatible = "allwinner,sun4i-mmc";
+ reg = <0x01c0f000 0x1000>;
+ clocks = <&ahb_gates 8>, <&mmc0>;
++ clock-names = "ahb", "mod";
+ interrupts = <32>;
+ bus-width = <4>;
+ status = "disabled";
projects / openwrt / svn-archive / archive.git / commitdiff