ipq806x: convert ok to okay in dts

DT spec require okay instead of ok in dts files

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>

diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
index 655f9fba374e16ed596f9a96176159dc67bcf33c..552d03f78964e7c61c527d86ab4c2dc09377a270 100644 (file)
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -89,9 +89,9 @@
 
                gsbi@16300000 {
                        qcom,mode = <GSBI_PROT_I2C_UART>;
-                       status = "ok";
+                       status = "okay";
                        serial@16340000 {
-                               status = "ok";
+                               status = "okay";
                        };
 
                        /*
@@ -104,10 +104,10 @@
 
                gsbi5: gsbi@1a200000 {
                        qcom,mode = <GSBI_PROT_SPI>;
-                       status = "ok";
+                       status = "okay";
 
                        spi4: spi@1a280000 {
-                               status = "ok";
+                               status = "okay";
                                spi-max-frequency = <50000000>;
 
                                pinctrl-0 = <&spi_pins>;
@@ -130,48 +130,48 @@
                };
 
                sata-phy@1b400000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                sata@29000000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@100f8800 {          /* USB3 port 1 HS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@100f8830 {          /* USB3 port 1 SS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@110f8800 {          /* USB3 port 0 HS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@110f8830 {          /* USB3 port 0 SS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                usb30@0 {
-                       status = "ok";
+                       status = "okay";
                };
 
                usb30@1 {
-                       status = "ok";
+                       status = "okay";
                };
 
                pcie0: pci@1b500000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                pcie1: pci@1b700000 {
-                       status = "ok";
+                       status = "okay";
                        force_gen1 = <1>;
                };
 
                nand@1ac00000 {
-                       status = "ok";
+                       status = "okay";
 
                        pinctrl-0 = <&nand_pins>;
                        pinctrl-names = "default";
@@ -217,7 +217,7 @@
                };
 
                gmac1: ethernet@37200000 {
-                       status = "ok";
+                       status = "okay";
                        phy-mode = "rgmii";
                        qcom,id = <1>;
 
@@ -231,7 +231,7 @@
                };
 
                gmac2: ethernet@37400000 {
-                       status = "ok";
+                       status = "okay";
                        phy-mode = "sgmii";
                        qcom,id = <2>;
 
@@ -244,5 +244,5 @@
 };
 
 &adm_dma {
-       status = "ok";
+       status = "okay";
 };

diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ap161.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ap161.dts
index 7e589be2c3cebe221932d063e300e02da688d792..1dad12cfd6393dc3f288c51fddde1fdaa3da351f 100644 (file)
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ap161.dts
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ap161.dts
@@ -92,9 +92,9 @@
 
                gsbi@16300000 {
                        qcom,mode = <GSBI_PROT_I2C_UART>;
-                       status = "ok";
+                       status = "okay";
                        serial@16340000 {
-                               status = "ok";
+                               status = "okay";
                        };
 
                        /*
@@ -107,10 +107,10 @@
 
                gsbi5: gsbi@1a200000 {
                        qcom,mode = <GSBI_PROT_SPI>;
-                       status = "ok";
+                       status = "okay";
 
                        spi4: spi@1a280000 {
-                               status = "ok";
+                               status = "okay";
                                spi-max-frequency = <50000000>;
 
                                pinctrl-0 = <&spi_pins>;
@@ -133,52 +133,52 @@
                };
 
                sata-phy@1b400000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                sata@29000000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@100f8800 {          /* USB3 port 1 HS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@100f8830 {          /* USB3 port 1 SS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@110f8800 {          /* USB3 port 0 HS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@110f8830 {          /* USB3 port 0 SS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                usb30@0 {
-                       status = "ok";
+                       status = "okay";
                };
 
                usb30@1 {
-                       status = "ok";
+                       status = "okay";
                };
 
                pcie0: pci@1b500000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                pcie1: pci@1b700000 {
-                       status = "ok";
+                       status = "okay";
                        force_gen1 = <1>;
                };
 
                pcie2: pci@1b900000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                nand@1ac00000 {
-                       status = "ok";
+                       status = "okay";
 
                        pinctrl-0 = <&nand_pins>;
                        pinctrl-names = "default";
@@ -232,7 +232,7 @@
                };
 
                gmac0: ethernet@37000000 {
-                       status = "ok";
+                       status = "okay";
                        phy-mode = "rgmii";
                        qcom,id = <0>;
 
@@ -247,7 +247,7 @@
                };
 
                gmac1: ethernet@37200000 {
-                       status = "ok";
+                       status = "okay";
                        phy-mode = "rgmii";
                        qcom,id = <1>;
                        mdiobus = <&mdio0>;
@@ -259,7 +259,7 @@
                };
 
                gmac2: ethernet@37400000 {
-                       status = "ok";
+                       status = "okay";
                        phy-mode = "sgmii";
                        qcom,id = <2>;
                        mdiobus = <&mdio0>;
@@ -273,5 +273,5 @@
 };
 
 &adm_dma {
-       status = "ok";
+       status = "okay";
 };

diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-c2600.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
index c4fb2524c8a7ffc025c0d390b6f9fc714611e0f7..de80a11bdfe53f8504cb7e228494f37ca1ea66a9 100644 (file)
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
@@ -133,9 +133,9 @@
 
                gsbi@16300000 {
                        qcom,mode = <GSBI_PROT_I2C_UART>;
-                       status = "ok";
+                       status = "okay";
                        serial@16340000 {
-                               status = "ok";
+                               status = "okay";
                        };
                        /*
                         * The i2c device on gsbi4 should not be enabled.
@@ -147,10 +147,10 @@
 
                gsbi5: gsbi@1a200000 {
                        qcom,mode = <GSBI_PROT_SPI>;
-                       status = "ok";
+                       status = "okay";
 
                        spi5: spi@1a280000 {
-                               status = "ok";
+                               status = "okay";
 
                                pinctrl-0 = <&spi_pins>;
                                pinctrl-names = "default";
@@ -316,41 +316,41 @@
                };
 
                phy@100f8800 {          /* USB3 port 1 HS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@100f8830 {          /* USB3 port 1 SS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@110f8800 {          /* USB3 port 0 HS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@110f8830 {          /* USB3 port 0 SS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                usb30@0 {
-                       status = "ok";
+                       status = "okay";
 
                        pinctrl-0 = <&usb0_pwr_en_pin>;
                        pinctrl-names = "default";
                };
 
                usb30@1 {
-                       status = "ok";
+                       status = "okay";
 
                        pinctrl-0 = <&usb1_pwr_en_pin>;
                        pinctrl-names = "default";
                };
 
                pcie0: pci@1b500000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                pcie1: pci@1b700000 {
-                       status = "ok";
+                       status = "okay";
                        force_gen1 = <1>;
                };
 
@@ -381,7 +381,7 @@
                };
 
                gmac1: ethernet@37200000 {
-                       status = "ok";
+                       status = "okay";
                        phy-mode = "rgmii";
                        qcom,id = <1>;
 
@@ -398,7 +398,7 @@
                };
 
                gmac2: ethernet@37400000 {
-                       status = "ok";
+                       status = "okay";
                        phy-mode = "sgmii";
                        qcom,id = <2>;
 
@@ -490,5 +490,5 @@
 };
 
 &adm_dma {
-       status = "ok";
+       status = "okay";
 };

diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-d7800.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
index 1760b1968f844c5d204f78a40baa532739532f70..fc7aea0dca5d7a4b01babc4b6921097a62ec1b0a 100644 (file)
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
@@ -131,9 +131,9 @@
 
                gsbi@16300000 {
                        qcom,mode = <GSBI_PROT_I2C_UART>;
-                       status = "ok";
+                       status = "okay";
                        serial@16340000 {
-                               status = "ok";
+                               status = "okay";
                        };
                        /*
                         * The i2c device on gsbi4 should not be enabled.
@@ -144,53 +144,53 @@
                };
 
                sata-phy@1b400000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                sata@29000000 {
                        ports-implemented = <0x1>;
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@100f8800 {          /* USB3 port 1 HS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@100f8830 {          /* USB3 port 1 SS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@110f8800 {          /* USB3 port 0 HS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@110f8830 {          /* USB3 port 0 SS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                usb30@0 {
-                       status = "ok";
+                       status = "okay";
 
                        pinctrl-0 = <&usb0_pwr_en_pins>;
                        pinctrl-names = "default";
                };
 
                usb30@1 {
-                       status = "ok";
+                       status = "okay";
 
                        pinctrl-0 = <&usb1_pwr_en_pins>;
                        pinctrl-names = "default";
                };
 
                pcie0: pci@1b500000 {
-                       status = "ok";
+                       status = "okay";
                        reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
                        pinctrl-0 = <&pcie0_pins>;
                        pinctrl-names = "default";
                };
 
                pcie1: pci@1b700000 {
-                       status = "ok";
+                       status = "okay";
                        reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
                        pinctrl-0 = <&pcie1_pins>;
                        pinctrl-names = "default";
@@ -198,7 +198,7 @@
                };
 
                nand@1ac00000 {
-                       status = "ok";
+                       status = "okay";
 
                        pinctrl-0 = <&nand_pins>;
                        pinctrl-names = "default";
@@ -301,7 +301,7 @@
                };
 
                gmac1: ethernet@37200000 {
-                       status = "ok";
+                       status = "okay";
                        phy-mode = "rgmii";
                        phy-handle = <&phy4>;
                        qcom,id = <1>;
@@ -313,7 +313,7 @@
                };
 
                gmac2: ethernet@37400000 {
-                       status = "ok";
+                       status = "okay";
                        phy-mode = "sgmii";
                        qcom,id = <2>;
 
@@ -404,5 +404,5 @@
 };
 
 &adm_dma {
-       status = "ok";
+       status = "okay";
 };

diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-db149.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-db149.dts
index f4cface193ea547098e5b8ca16828f4b74ebaa03..a873bf94f50ca688b50a54f1c1f4ff4ef0ef76e0 100644 (file)
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-db149.dts
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-db149.dts
@@ -60,18 +60,18 @@
 
                gsbi2: gsbi@12480000 {
                        qcom,mode = <GSBI_PROT_I2C_UART>;
-                       status = "ok";
+                       status = "okay";
                        uart2: serial@12490000 {
-                               status = "ok";
+                               status = "okay";
                        };
                };
 
                gsbi5: gsbi@1a200000 {
                        qcom,mode = <GSBI_PROT_SPI>;
-                       status = "ok";
+                       status = "okay";
 
                        spi4: spi@1a280000 {
-                               status = "ok";
+                               status = "okay";
                                spi-max-frequency = <50000000>;
 
                                pinctrl-0 = <&spi_pins>;
@@ -116,47 +116,47 @@
                };
 
                sata-phy@1b400000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                sata@29000000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@100f8800 {          /* USB3 port 1 HS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@100f8830 {          /* USB3 port 1 SS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@110f8800 {          /* USB3 port 0 HS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@110f8830 {          /* USB3 port 0 SS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                usb30@0 {
-                       status = "ok";
+                       status = "okay";
                };
 
                usb30@1 {
-                       status = "ok";
+                       status = "okay";
                };
 
                pcie0: pci@1b500000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                pcie1: pci@1b700000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                pcie2: pci@1b900000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                mdio0: mdio {
@@ -195,7 +195,7 @@
                };
 
                gmac0: ethernet@37000000 {
-                       status = "ok";
+                       status = "okay";
                        phy-mode = "rgmii";
                        qcom,id = <0>;
                        phy-handle = <&phy4>;
@@ -205,7 +205,7 @@
                };
 
                gmac1: ethernet@37200000 {
-                       status = "ok";
+                       status = "okay";
                        phy-mode = "sgmii";
                        qcom,id = <1>;
 
@@ -216,14 +216,14 @@
                };
 
                gmac2: ethernet@37400000 {
-                       status = "ok";
+                       status = "okay";
                        phy-mode = "sgmii";
                        qcom,id = <2>;
                        phy-handle = <&phy6>;
                };
 
                gmac3: ethernet@37600000 {
-                       status = "ok";
+                       status = "okay";
                        phy-mode = "sgmii";
                        qcom,id = <3>;
                        phy-handle = <&phy7>;

diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
index ca8376afd7e3a98b26e81f5457a4711031cb4adf..7fe45a87983cf469e873f3cccce916b72a45e5a2 100644 (file)
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
@@ -111,9 +111,9 @@
 
                gsbi@16300000 {
                        qcom,mode = <GSBI_PROT_I2C_UART>;
-                       status = "ok";
+                       status = "okay";
                        serial@16340000 {
-                               status = "ok";
+                               status = "okay";
                        };
                        /*
                         * The i2c device on gsbi4 should not be enabled.
@@ -124,52 +124,52 @@
                };
 
                sata-phy@1b400000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                sata@29000000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@100f8800 {          /* USB3 port 1 HS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@100f8830 {          /* USB3 port 1 SS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@110f8800 {          /* USB3 port 0 HS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@110f8830 {          /* USB3 port 0 SS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                usb30@0 {
-                       status = "ok";
+                       status = "okay";
                };
 
                usb30@1 {
-                       status = "ok";
+                       status = "okay";
                };
 
                pcie0: pci@1b500000 {
-                       status = "ok";
+                       status = "okay";
                        force_gen1 = <1>;
                };
 
                pcie1: pci@1b700000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                pcie2: pci@1b900000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                nand@1ac00000 {
-                       status = "ok";
+                       status = "okay";
 
                        pinctrl-0 = <&nand_pins>;
                        pinctrl-names = "default";
@@ -317,7 +317,7 @@
                };
 
                gmac1: ethernet@37200000 {
-                       status = "ok";
+                       status = "okay";
                        phy-mode = "rgmii";
                        qcom,id = <1>;
                        qcom,phy_mdio_addr = <4>;
@@ -333,7 +333,7 @@
                };
                //lan
                gmac2: ethernet@37400000 {
-                       status = "ok";
+                       status = "okay";
                        phy-mode = "sgmii";
                        qcom,id = <2>;
                        qcom,phy_mdio_addr = <0>;       /* none */
@@ -347,7 +347,7 @@
                };
 
                adm_dma: dma@18300000 {
-                       status = "ok";
+                       status = "okay";
                };
        };
 

diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
index b6505dd54120917ca33dcfecfb44519bd68fb506..975556756041603063db84238ae7f2a2be3b0220 100644 (file)
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
@@ -112,9 +112,9 @@
 
                gsbi@16300000 {
                        qcom,mode = <GSBI_PROT_I2C_UART>;
-                       status = "ok";
+                       status = "okay";
                        serial@16340000 {
-                               status = "ok";
+                               status = "okay";
                        };
                        /*
                         * The i2c device on gsbi4 should not be enabled.
@@ -125,54 +125,54 @@
                };
 
                sata-phy@1b400000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                sata@29000000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@100f8800 {          /* USB3 port 1 HS phy */
                        clocks = <&gcc USB30_0_UTMI_CLK>;
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@100f8830 {          /* USB3 port 1 SS phy */
                        clocks = <&gcc USB30_0_MASTER_CLK>;
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@110f8800 {          /* USB3 port 0 HS phy */
                        clocks = <&gcc USB30_1_UTMI_CLK>;
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@110f8830 {          /* USB3 port 0 SS phy */
                        clocks = <&gcc USB30_1_MASTER_CLK>;
-                       status = "ok";
+                       status = "okay";
                };
 
                usb30@0 {
                        clocks = <&gcc USB30_1_MASTER_CLK>;
-                       status = "ok";
+                       status = "okay";
                };
 
                usb30@1 {
                        clocks = <&gcc USB30_0_MASTER_CLK>;
-                       status = "ok";
+                       status = "okay";
                };
 
                pcie0: pci@1b500000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                pcie1: pci@1b700000 {
-                       status = "ok";
+                       status = "okay";
                        force_gen1 = <1>;
                };
 
                nand@1ac00000 {
-                       status = "ok";
+                       status = "okay";
 
                        pinctrl-0 = <&nand_pins>;
                        pinctrl-names = "default";
@@ -266,7 +266,7 @@
                };
 
                gmac1: ethernet@37200000 {
-                       status = "ok";
+                       status = "okay";
                        phy-mode = "rgmii";
                        qcom,id = <1>;
 
@@ -282,7 +282,7 @@
                };
 
                gmac2: ethernet@37400000 {
-                       status = "ok";
+                       status = "okay";
                        phy-mode = "sgmii";
                        qcom,id = <2>;
 
@@ -378,5 +378,5 @@
 };
 
 &adm_dma {
-       status = "ok";
+       status = "okay";
 };

diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
index faec8b35aec7149f91641e7294798af58164e308..471e02c5f10ebf2609f2519abcf7691dc6045ff3 100644 (file)
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
@@ -136,9 +136,9 @@
 
                gsbi@16300000 {
                        qcom,mode = <GSBI_PROT_I2C_UART>;
-                       status = "ok";
+                       status = "okay";
                        serial@16340000 {
-                               status = "ok";
+                               status = "okay";
                        };
                        /*
                         * The i2c device on gsbi4 should not be enabled.
@@ -149,52 +149,52 @@
                };
 
                sata-phy@1b400000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                sata@29000000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@100f8800 {          /* USB3 port 1 HS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@100f8830 {          /* USB3 port 1 SS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@110f8800 {          /* USB3 port 0 HS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@110f8830 {          /* USB3 port 0 SS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                usb30@0 {
-                       status = "ok";
+                       status = "okay";
 
                        pinctrl-0 = <&usb0_pwr_en_pins>;
                        pinctrl-names = "default";
                };
 
                usb30@1 {
-                       status = "ok";
+                       status = "okay";
 
                        pinctrl-0 = <&usb1_pwr_en_pins>;
                        pinctrl-names = "default";
                };
 
                pcie0: pci@1b500000 {
-                       status = "ok";
+                       status = "okay";
                        reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
                        pinctrl-0 = <&pcie0_pins>;
                        pinctrl-names = "default";
                };
 
                pcie1: pci@1b700000 {
-                       status = "ok";
+                       status = "okay";
                        reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
                        pinctrl-0 = <&pcie1_pins>;
                        pinctrl-names = "default";
@@ -202,7 +202,7 @@
                };
 
                nand@1ac00000 {
-                       status = "ok";
+                       status = "okay";
 
                        pinctrl-0 = <&nand_pins>;
                        pinctrl-names = "default";
@@ -296,7 +296,7 @@
                };
 
                gmac1: ethernet@37200000 {
-                       status = "ok";
+                       status = "okay";
                        phy-mode = "rgmii";
                        qcom,id = <1>;
 
@@ -312,7 +312,7 @@
                };
 
                gmac2: ethernet@37400000 {
-                       status = "ok";
+                       status = "okay";
                        phy-mode = "sgmii";
                        qcom,id = <2>;
 
@@ -403,5 +403,5 @@
 };
 
 &adm_dma {
-       status = "ok";
+       status = "okay";
 };

diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts
index 2c224016b614384b1298db785e5186c21fdeb6d1..2510ca1081bf71aafbde3eeb89e16e2fa01d84d8 100644 (file)
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts
@@ -111,9 +111,9 @@
 
                gsbi@16300000 {
                        qcom,mode = <GSBI_PROT_I2C_UART>;
-                       status = "ok";
+                       status = "okay";
                        serial@16340000 {
-                               status = "ok";
+                               status = "okay";
                        };
                        /*
                         * The i2c device on gsbi4 should not be enabled.
@@ -125,10 +125,10 @@
 
                gsbi5: gsbi@1a200000 {
                        qcom,mode = <GSBI_PROT_SPI>;
-                       status = "ok";
+                       status = "okay";
 
                        spi4: spi@1a280000 {
-                               status = "ok";
+                               status = "okay";
 
                                pinctrl-0 = <&spi_pins>;
                                pinctrl-names = "default";
@@ -234,35 +234,35 @@
                };
 
                phy@100f8800 {          /* USB3 port 1 HS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@100f8830 {          /* USB3 port 1 SS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@110f8800 {          /* USB3 port 0 HS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@110f8830 {          /* USB3 port 0 SS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                usb30@0 {
-                       status = "ok";
+                       status = "okay";
                };
 
                usb30@1 {
-                       status = "ok";
+                       status = "okay";
                };
 
                pcie0: pci@1b500000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                pcie1: pci@1b700000 {
-                       status = "ok";
+                       status = "okay";
                        force_gen1 = <1>;
                };
 
@@ -293,7 +293,7 @@
                };
 
                gmac1: ethernet@37200000 {
-                       status = "ok";
+                       status = "okay";
                        phy-mode = "rgmii";
                        qcom,id = <1>;
 
@@ -310,7 +310,7 @@
                };
 
                gmac2: ethernet@37400000 {
-                       status = "ok";
+                       status = "okay";
                        phy-mode = "sgmii";
                        qcom,id = <2>;
 
@@ -413,5 +413,5 @@
 };
 
 &adm_dma {
-       status = "ok";
+       status = "okay";
 };

diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts
index 7b5ee799eefa2168a2dadf9b8027ce438ad142dd..2f511e498ec0f0e6ebdfb258e6e67299d6f5190d 100644 (file)
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts
@@ -240,7 +240,7 @@
 };
 
 &gmac2 {
-       status = "ok";
+       status = "okay";
 
        phy-mode = "sgmii";
        qcom,id = <2>;

diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts
index 7cd1c7b567d676694f0731ec23d3f8965bac5228..e1fa475310ff9d64a4bc3090bbede61d13d10284 100644 (file)
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts
@@ -151,9 +151,9 @@
 
                gsbi@16300000 {
                        qcom,mode = <GSBI_PROT_I2C_UART>;
-                       status = "ok";
+                       status = "okay";
                        serial@16340000 {
-                               status = "ok";
+                               status = "okay";
                        };
                        /*
                         * The i2c device on gsbi4 should not be enabled.
@@ -165,10 +165,10 @@
 
                gsbi5: gsbi@1a200000 {
                        qcom,mode = <GSBI_PROT_SPI>;
-                       status = "ok";
+                       status = "okay";
 
                        spi4: spi@1a280000 {
-                               status = "ok";
+                               status = "okay";
 
                                pinctrl-0 = <&spi_pins>;
                                pinctrl-names = "default";
@@ -190,44 +190,44 @@
                };
 
                phy@100f8800 {          /* USB3 port 1 HS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@100f8830 {          /* USB3 port 1 SS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@110f8800 {          /* USB3 port 0 HS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@110f8830 {          /* USB3 port 0 SS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                usb30@0 {
-                       status = "ok";
+                       status = "okay";
 
                        pinctrl-0 = <&usb0_pwr_en_pins>;
                        pinctrl-names = "default";
                };
 
                usb30@1 {
-                       status = "ok";
+                       status = "okay";
 
                        pinctrl-0 = <&usb1_pwr_en_pins>;
                        pinctrl-names = "default";
                };
 
                pcie0: pci@1b500000 {
-                       status = "ok";
+                       status = "okay";
                        reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
                        pinctrl-0 = <&pcie0_pins>;
                        pinctrl-names = "default";
                };
 
                pcie1: pci@1b700000 {
-                       status = "ok";
+                       status = "okay";
                        reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
                        pinctrl-0 = <&pcie1_pins>;
                        pinctrl-names = "default";
@@ -279,7 +279,7 @@
                };
 
                gmac1: ethernet@37200000 {
-                       status = "ok";
+                       status = "okay";
                        phy-mode = "rgmii";
                        qcom,id = <1>;
                        qcom,phy_mdio_addr = <4>;
@@ -300,7 +300,7 @@
                };
 
                gmac2: ethernet@37400000 {
-                       status = "ok";
+                       status = "okay";
                        phy-mode = "sgmii";
                        qcom,id = <2>;
                        qcom,phy_mdio_addr = <0>;       /* none */
@@ -382,5 +382,5 @@
 };
 
 &adm_dma {
-       status = "ok";
+       status = "okay";
 };

diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8065-r7800.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
index 447c0da696f524e5a6034f030027e308565e8fe2..304f948296e794c56b9a35bbe517d8e9ebe82244 100644 (file)
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
@@ -204,9 +204,9 @@
 
                gsbi@16300000 {
                        qcom,mode = <GSBI_PROT_I2C_UART>;
-                       status = "ok";
+                       status = "okay";
                        serial@16340000 {
-                               status = "ok";
+                               status = "okay";
                        };
                        /*
                         * The i2c device on gsbi4 should not be enabled.
@@ -217,55 +217,55 @@
                };
 
                sata-phy@1b400000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                sata@29000000 {
                        ports-implemented = <0x1>;
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@100f8800 {          /* USB3 port 1 HS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@100f8830 {          /* USB3 port 1 SS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@110f8800 {          /* USB3 port 0 HS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@110f8830 {          /* USB3 port 0 SS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                usb30@0 {
-                       status = "ok";
+                       status = "okay";
 
                        pinctrl-0 = <&usb0_pwr_en_pins>;
                        pinctrl-names = "default";
                };
 
                usb30@1 {
-                       status = "ok";
+                       status = "okay";
 
                        pinctrl-0 = <&usb1_pwr_en_pins>;
                        pinctrl-names = "default";
                };
 
                pcie0: pci@1b500000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                pcie1: pci@1b700000 {
-                       status = "ok";
+                       status = "okay";
                        force_gen1 = <1>;
                };
 
                nand@1ac00000 {
-                       status = "ok";
+                       status = "okay";
 
                        pinctrl-0 = <&nand_pins>;
                        pinctrl-names = "default";
@@ -382,7 +382,7 @@
                };
 
                gmac1: ethernet@37200000 {
-                       status = "ok";
+                       status = "okay";
                        phy-mode = "rgmii";
                        qcom,id = <1>;
                        qcom,phy_mdio_addr = <4>;
@@ -405,7 +405,7 @@
                };
 
                gmac2: ethernet@37400000 {
-                       status = "ok";
+                       status = "okay";
                        phy-mode = "sgmii";
                        qcom,id = <2>;
                        qcom,phy_mdio_addr = <0>;       /* none */
@@ -509,5 +509,5 @@
 };
 
 &adm_dma {
-       status = "ok";
+       status = "okay";
 };