unsigned int conf_enable;
unsigned int conf_disable;
unsigned int conf_mask;
+ unsigned int conf2_mask;
unsigned int clr_mfp_irq_base;
unsigned int clr_mfp_hwirq;
struct irq_domain *domain;
unsigned int conf_enable;
unsigned int conf_disable;
unsigned int conf_mask;
+ unsigned int conf2_mask;
};
static void __iomem *mmp_icu_base;
+static void __iomem *mmp_icu2_base;
static struct icu_chip_data icu_data[MAX_ICU_NR];
static int max_icu_nr;
r &= ~data->conf_mask;
r |= data->conf_disable;
writel_relaxed(r, mmp_icu_base + (hwirq << 2));
+
+ if (data->conf2_mask) {
+ /*
+ * ICU1 (above) only controls PJ4 MP1; if using SMP,
+ * we need to also mask the MP2 and MM cores via ICU2.
+ */
+ r = readl_relaxed(mmp_icu2_base + (hwirq << 2));
+ r &= ~data->conf2_mask;
+ writel_relaxed(r, mmp_icu2_base + (hwirq << 2));
+ }
} else {
r = readl_relaxed(data->reg_mask) | (1 << hwirq);
writel_relaxed(r, data->reg_mask);
MMP2_ICU_INT_ROUTE_PJ4_FIQ,
};
+static struct mmp_intc_conf mmp3_conf = {
+ .conf_enable = 0x20,
+ .conf_disable = 0x0,
+ .conf_mask = MMP2_ICU_INT_ROUTE_PJ4_IRQ |
+ MMP2_ICU_INT_ROUTE_PJ4_FIQ,
+ .conf2_mask = 0xf0,
+};
+
static void __exception_irq_entry mmp_handle_irq(struct pt_regs *regs)
{
int hwirq;
}
IRQCHIP_DECLARE(mmp2_intc, "mrvl,mmp2-intc", mmp2_of_init);
+static int __init mmp3_of_init(struct device_node *node,
+ struct device_node *parent)
+{
+ int ret;
+
+ mmp_icu2_base = of_iomap(node, 1);
+ if (!mmp_icu2_base) {
+ pr_err("Failed to get interrupt controller register #2\n");
+ return -ENODEV;
+ }
+
+ ret = mmp_init_bases(node);
+ if (ret < 0) {
+ iounmap(mmp_icu2_base);
+ return ret;
+ }
+
+ icu_data[0].conf_enable = mmp3_conf.conf_enable;
+ icu_data[0].conf_disable = mmp3_conf.conf_disable;
+ icu_data[0].conf_mask = mmp3_conf.conf_mask;
+ icu_data[0].conf2_mask = mmp3_conf.conf2_mask;
+ set_handle_irq(mmp2_handle_irq);
+ max_icu_nr = 1;
+ return 0;
+}
+IRQCHIP_DECLARE(mmp3_intc, "marvell,mmp3-intc", mmp3_of_init);
+
static int __init mmp2_mux_of_init(struct device_node *node,
struct device_node *parent)
{