ipq806x: add missing gpio and gsbi declaration

Adds missing gpio and gsbi declaration.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>

diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064.dtsi b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064.dtsi
index a7a9c49fc55e0c241f7563f4444bb81d72bbc529..efaa6abd784bba47cfb76898c7a2a928cba417d1 100644 (file)
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -656,6 +656,34 @@
                                        output-low;
                                };
                        };
+
+                       spi_pins: spi_pins {
+                               mux {
+                                       pins = "gpio18", "gpio19", "gpio21";
+                                       function = "gsbi5";
+                                       drive-strength = <10>;
+                                       bias-none;
+                               };
+                       };
+
+                       leds_pins: leds_pins {
+                               mux {
+                                       pins = "gpio7", "gpio8", "gpio9",
+                                              "gpio26", "gpio53";
+                                       function = "gpio";
+                                       drive-strength = <2>;
+                                       bias-pull-down;
+                                       output-low;
+                               };
+                       };
+
+                       buttons_pins: buttons_pins {
+                               mux {
+                                       pins = "gpio54";
+                                       drive-strength = <2>;
+                                       bias-pull-up;
+                               };
+                       };
                };
 
                intc: interrupt-controller@2000000 {
@@ -852,6 +880,29 @@
                        };
                };
 
+               gsbi7: gsbi@16600000 {
+                       status = "disabled";
+                       compatible = "qcom,gsbi-v1.0.0";
+                       cell-index = <7>;
+                       reg = <0x16600000 0x100>;
+                       clocks = <&gcc GSBI7_H_CLK>;
+                       clock-names = "iface";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ranges;
+                       syscon-tcsr = <&tcsr>;
+
+                       gsbi7_serial: serial@16640000 {
+                               compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+                               reg = <0x16640000 0x1000>,
+                                     <0x16600000 0x1000>;
+                               interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
+                               clock-names = "core", "iface";
+                               status = "disabled";
+                       };
+               };
+
                sata_phy: sata-phy@1b400000 {
                        compatible = "qcom,ipq806x-sata-phy";
                        reg = <0x1b400000 0x200>;