myri_sbus: Convert to pure OF driver.
authorDavid S. Miller <davem@davemloft.net>
Wed, 27 Aug 2008 06:36:58 +0000 (23:36 -0700)
committerDavid S. Miller <davem@davemloft.net>
Fri, 29 Aug 2008 09:13:32 +0000 (02:13 -0700)
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/myri_sbus.c
drivers/net/myri_sbus.h

index f2a3ff24de44012809cc93e3fab1a93dc15b1216..03867b10f37ec1f706b3ae964779d2c776c7b89d 100644 (file)
@@ -1,6 +1,6 @@
 /* myri_sbus.c: MyriCOM MyriNET SBUS card driver.
  *
- * Copyright (C) 1996, 1999, 2006 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1996, 1999, 2006, 2008 David S. Miller (davem@davemloft.net)
  */
 
 static char version[] =
@@ -23,6 +23,8 @@ static char version[] =
 #include <linux/skbuff.h>
 #include <linux/bitops.h>
 #include <linux/dma-mapping.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 
 #include <net/dst.h>
 #include <net/arp.h>
@@ -34,7 +36,6 @@ static char version[] =
 #include <asm/dma.h>
 #include <asm/byteorder.h>
 #include <asm/idprom.h>
-#include <asm/sbus.h>
 #include <asm/openprom.h>
 #include <asm/oplib.h>
 #include <asm/auxio.h>
@@ -244,7 +245,7 @@ static void myri_clean_rings(struct myri_eth *mp)
                        u32 dma_addr;
 
                        dma_addr = sbus_readl(&rxd->myri_scatters[0].addr);
-                       dma_unmap_single(&mp->myri_sdev->ofdev.dev, dma_addr,
+                       dma_unmap_single(&mp->myri_op->dev, dma_addr,
                                         RX_ALLOC_SIZE, DMA_FROM_DEVICE);
                        dev_kfree_skb(mp->rx_skbs[i]);
                        mp->rx_skbs[i] = NULL;
@@ -261,7 +262,7 @@ static void myri_clean_rings(struct myri_eth *mp)
                        u32 dma_addr;
 
                        dma_addr = sbus_readl(&txd->myri_gathers[0].addr);
-                       dma_unmap_single(&mp->myri_sdev->ofdev.dev, dma_addr,
+                       dma_unmap_single(&mp->myri_op->dev, dma_addr,
                                         (skb->len + 3) & ~3,
                                         DMA_TO_DEVICE);
                        dev_kfree_skb(mp->tx_skbs[i]);
@@ -292,7 +293,7 @@ static void myri_init_rings(struct myri_eth *mp, int from_irq)
                skb->dev = dev;
                skb_put(skb, RX_ALLOC_SIZE);
 
-               dma_addr = dma_map_single(&mp->myri_sdev->ofdev.dev,
+               dma_addr = dma_map_single(&mp->myri_op->dev,
                                          skb->data, RX_ALLOC_SIZE,
                                          DMA_FROM_DEVICE);
                sbus_writel(dma_addr, &rxd[i].myri_scatters[0].addr);
@@ -350,7 +351,7 @@ static void myri_tx(struct myri_eth *mp, struct net_device *dev)
 
                DTX(("SKB[%d] ", entry));
                dma_addr = sbus_readl(&sq->myri_txd[entry].myri_gathers[0].addr);
-               dma_unmap_single(&mp->myri_sdev->ofdev.dev, dma_addr,
+               dma_unmap_single(&mp->myri_op->dev, dma_addr,
                                 skb->len, DMA_TO_DEVICE);
                dev_kfree_skb(skb);
                mp->tx_skbs[entry] = NULL;
@@ -430,7 +431,7 @@ static void myri_rx(struct myri_eth *mp, struct net_device *dev)
 
                /* Check for errors. */
                DRX(("rxd[%d]: %p len[%d] csum[%08x] ", entry, rxd, len, csum));
-               dma_sync_single_for_cpu(&mp->myri_sdev->ofdev.dev,
+               dma_sync_single_for_cpu(&mp->myri_op->dev,
                                        sbus_readl(&rxd->myri_scatters[0].addr),
                                        RX_ALLOC_SIZE, DMA_FROM_DEVICE);
                if (len < (ETH_HLEN + MYRI_PAD_LEN) || (skb->data[0] != MYRI_PAD_LEN)) {
@@ -449,7 +450,7 @@ static void myri_rx(struct myri_eth *mp, struct net_device *dev)
                        drops++;
                        DRX(("DROP "));
                        dev->stats.rx_dropped++;
-                       dma_sync_single_for_device(&mp->myri_sdev->ofdev.dev,
+                       dma_sync_single_for_device(&mp->myri_op->dev,
                                                   sbus_readl(&rxd->myri_scatters[0].addr),
                                                   RX_ALLOC_SIZE,
                                                   DMA_FROM_DEVICE);
@@ -471,14 +472,14 @@ static void myri_rx(struct myri_eth *mp, struct net_device *dev)
                                DRX(("skb_alloc(FAILED) "));
                                goto drop_it;
                        }
-                       dma_unmap_single(&mp->myri_sdev->ofdev.dev,
+                       dma_unmap_single(&mp->myri_op->dev,
                                         sbus_readl(&rxd->myri_scatters[0].addr),
                                         RX_ALLOC_SIZE,
                                         DMA_FROM_DEVICE);
                        mp->rx_skbs[index] = new_skb;
                        new_skb->dev = dev;
                        skb_put(new_skb, RX_ALLOC_SIZE);
-                       dma_addr = dma_map_single(&mp->myri_sdev->ofdev.dev,
+                       dma_addr = dma_map_single(&mp->myri_op->dev,
                                                  new_skb->data,
                                                  RX_ALLOC_SIZE,
                                                  DMA_FROM_DEVICE);
@@ -507,7 +508,7 @@ static void myri_rx(struct myri_eth *mp, struct net_device *dev)
 
                        /* Reuse original ring buffer. */
                        DRX(("reuse "));
-                       dma_sync_single_for_device(&mp->myri_sdev->ofdev.dev,
+                       dma_sync_single_for_device(&mp->myri_op->dev,
                                                   sbus_readl(&rxd->myri_scatters[0].addr),
                                                   RX_ALLOC_SIZE,
                                                   DMA_FROM_DEVICE);
@@ -659,7 +660,7 @@ static int myri_start_xmit(struct sk_buff *skb, struct net_device *dev)
                sbus_writew((skb->data[4] << 8) | skb->data[5], &txd->addr[3]);
        }
 
-       dma_addr = dma_map_single(&mp->myri_sdev->ofdev.dev, skb->data,
+       dma_addr = dma_map_single(&mp->myri_op->dev, skb->data,
                                  len, DMA_TO_DEVICE);
        sbus_writel(dma_addr, &txd->myri_gathers[0].addr);
        sbus_writel(len, &txd->myri_gathers[0].len);
@@ -899,30 +900,30 @@ static const struct header_ops myri_header_ops = {
        .cache_update   = myri_header_cache_update,
 };
 
-static int __devinit myri_ether_init(struct sbus_dev *sdev)
+static int __devinit myri_sbus_probe(struct of_device *op, const struct of_device_id *match)
 {
-       static int num;
+       struct device_node *dp = op->node;
        static unsigned version_printed;
        struct net_device *dev;
-       struct myri_eth *mp;
-       unsigned char prop_buf[32];
-       int i;
        DECLARE_MAC_BUF(mac);
+       struct myri_eth *mp;
+       const void *prop;
+       static int num;
+       int i, len;
 
-       DET(("myri_ether_init(%p,%d):\n", sdev, num));
+       DET(("myri_ether_init(%p,%d):\n", op, num));
        dev = alloc_etherdev(sizeof(struct myri_eth));
-
        if (!dev)
                return -ENOMEM;
 
        if (version_printed++ == 0)
                printk(version);
 
-       SET_NETDEV_DEV(dev, &sdev->ofdev.dev);
+       SET_NETDEV_DEV(dev, &op->dev);
 
-       mp = (struct myri_eth *) dev->priv;
+       mp = netdev_priv(dev);
        spin_lock_init(&mp->irq_lock);
-       mp->myri_sdev = sdev;
+       mp->myri_op = op;
 
        /* Clean out skb arrays. */
        for (i = 0; i < (RX_RING_SIZE + 1); i++)
@@ -932,55 +933,44 @@ static int __devinit myri_ether_init(struct sbus_dev *sdev)
                mp->tx_skbs[i] = NULL;
 
        /* First check for EEPROM information. */
-       i = prom_getproperty(sdev->prom_node, "myrinet-eeprom-info",
-                            (char *)&mp->eeprom, sizeof(struct myri_eeprom));
-       DET(("prom_getprop(myrinet-eeprom-info) returns %d\n", i));
-       if (i == 0 || i == -1) {
+       prop = of_get_property(dp, "myrinet-eeprom-info", &len);
+
+       if (prop)
+               memcpy(&mp->eeprom, prop, sizeof(struct myri_eeprom));
+       if (!prop) {
                /* No eeprom property, must cook up the values ourselves. */
                DET(("No EEPROM: "));
                mp->eeprom.bus_type = BUS_TYPE_SBUS;
-               mp->eeprom.cpuvers = prom_getintdefault(sdev->prom_node,"cpu_version",0);
-               mp->eeprom.cval = prom_getintdefault(sdev->prom_node,"clock_value",0);
-               mp->eeprom.ramsz = prom_getintdefault(sdev->prom_node,"sram_size",0);
-               DET(("cpuvers[%d] cval[%d] ramsz[%d]\n", mp->eeprom.cpuvers,
-                    mp->eeprom.cval, mp->eeprom.ramsz));
-               if (mp->eeprom.cpuvers == 0) {
-                       DET(("EEPROM: cpuvers was zero, setting to %04x\n",CPUVERS_2_3));
+               mp->eeprom.cpuvers =
+                       of_getintprop_default(dp, "cpu_version", 0);
+               mp->eeprom.cval =
+                       of_getintprop_default(dp, "clock_value", 0);
+               mp->eeprom.ramsz = of_getintprop_default(dp, "sram_size", 0);
+               if (!mp->eeprom.cpuvers)
                        mp->eeprom.cpuvers = CPUVERS_2_3;
-               }
-               if (mp->eeprom.cpuvers < CPUVERS_3_0) {
-                       DET(("EEPROM: cpuvers < CPUVERS_3_0, clockval set to zero.\n"));
+               if (mp->eeprom.cpuvers < CPUVERS_3_0)
                        mp->eeprom.cval = 0;
-               }
-               if (mp->eeprom.ramsz == 0) {
-                       DET(("EEPROM: ramsz == 0, setting to 128k\n"));
+               if (!mp->eeprom.ramsz)
                        mp->eeprom.ramsz = (128 * 1024);
-               }
-               i = prom_getproperty(sdev->prom_node, "myrinet-board-id",
-                                    &prop_buf[0], 10);
-               DET(("EEPROM: prom_getprop(myrinet-board-id) returns %d\n", i));
-               if ((i != 0) && (i != -1))
-                       memcpy(&mp->eeprom.id[0], &prop_buf[0], 6);
+
+               prop = of_get_property(dp, "myrinet-board-id", &len);
+               if (prop)
+                       memcpy(&mp->eeprom.id[0], prop, 6);
                else
                        set_boardid_from_idprom(mp, num);
-               i = prom_getproperty(sdev->prom_node, "fpga_version",
-                                    &mp->eeprom.fvers[0], 32);
-               DET(("EEPROM: prom_getprop(fpga_version) returns %d\n", i));
-               if (i == 0 || i == -1)
+
+               prop = of_get_property(dp, "fpga_version", &len);
+               if (prop)
+                       memcpy(&mp->eeprom.fvers[0], prop, 32);
+               else
                        memset(&mp->eeprom.fvers[0], 0, 32);
 
                if (mp->eeprom.cpuvers == CPUVERS_4_1) {
-                       DET(("EEPROM: cpuvers CPUVERS_4_1, "));
-                       if (mp->eeprom.ramsz == (128 * 1024)) {
-                               DET(("ramsize 128k, setting to 256k, "));
+                       if (mp->eeprom.ramsz == (128 * 1024))
                                mp->eeprom.ramsz = (256 * 1024);
-                       }
-                       if ((mp->eeprom.cval==0x40414041)||(mp->eeprom.cval==0x90449044)){
-                               DET(("changing cval from %08x to %08x ",
-                                    mp->eeprom.cval, 0x50e450e4));
+                       if ((mp->eeprom.cval == 0x40414041) ||
+                           (mp->eeprom.cval == 0x90449044))
                                mp->eeprom.cval = 0x50e450e4;
-                       }
-                       DET(("\n"));
                }
        }
 #ifdef DEBUG_DETECT
@@ -999,8 +989,8 @@ static int __devinit myri_ether_init(struct sbus_dev *sdev)
                 * XXX only a valid version for PCI cards?  Ask feldy...
                 */
                DET(("Mapping regs for cpuvers < CPUVERS_4_0\n"));
-               mp->regs = sbus_ioremap(&sdev->resource[0], 0,
-                                       mp->reg_size, "MyriCOM Regs");
+               mp->regs = of_ioremap(&op->resource[0], 0,
+                                     mp->reg_size, "MyriCOM Regs");
                if (!mp->regs) {
                        printk("MyriCOM: Cannot map MyriCOM registers.\n");
                        goto err;
@@ -1009,13 +999,12 @@ static int __devinit myri_ether_init(struct sbus_dev *sdev)
                mp->lregs = mp->lanai + (0x10000 * 2);
        } else {
                DET(("Mapping regs for cpuvers >= CPUVERS_4_0\n"));
-               mp->cregs = sbus_ioremap(&sdev->resource[0], 0,
-                                        PAGE_SIZE, "MyriCOM Control Regs");
-               mp->lregs = sbus_ioremap(&sdev->resource[0], (256 * 1024),
+               mp->cregs = of_ioremap(&op->resource[0], 0,
+                                      PAGE_SIZE, "MyriCOM Control Regs");
+               mp->lregs = of_ioremap(&op->resource[0], (256 * 1024),
                                         PAGE_SIZE, "MyriCOM LANAI Regs");
-               mp->lanai =
-                       sbus_ioremap(&sdev->resource[0], (512 * 1024),
-                                    mp->eeprom.ramsz, "MyriCOM SRAM");
+               mp->lanai = of_ioremap(&op->resource[0], (512 * 1024),
+                                      mp->eeprom.ramsz, "MyriCOM SRAM");
        }
        DET(("Registers mapped: cregs[%p] lregs[%p] lanai[%p]\n",
             mp->cregs, mp->lregs, mp->lanai));
@@ -1047,16 +1036,15 @@ static int __devinit myri_ether_init(struct sbus_dev *sdev)
        myri_reset_on(mp->cregs);
 
        /* Get the supported DVMA burst sizes from our SBUS. */
-       mp->myri_bursts = prom_getintdefault(mp->myri_sdev->bus->prom_node,
-                                            "burst-sizes", 0x00);
-
+       mp->myri_bursts = of_getintprop_default(dp->parent,
+                                               "burst-sizes", 0x00);
        if (!sbus_can_burst64())
                mp->myri_bursts &= ~(DMA_BURST64);
 
        DET(("MYRI bursts %02x\n", mp->myri_bursts));
 
        /* Encode SBUS interrupt level in second control register. */
-       i = prom_getint(sdev->prom_node, "interrupts");
+       i = of_getintprop_default(dp, "interrupts", 0);
        if (i == 0)
                i = 4;
        DET(("prom_getint(interrupts)==%d, irqlvl set to %04x\n",
@@ -1071,7 +1059,7 @@ static int __devinit myri_ether_init(struct sbus_dev *sdev)
        dev->tx_timeout = &myri_tx_timeout;
        dev->watchdog_timeo = 5*HZ;
        dev->set_multicast_list = &myri_set_multicast;
-       dev->irq = sdev->irqs[0];
+       dev->irq = op->irqs[0];
 
        /* Register interrupt handler now. */
        DET(("Requesting MYRIcom IRQ line.\n"));
@@ -1096,7 +1084,7 @@ static int __devinit myri_ether_init(struct sbus_dev *sdev)
                goto err_free_irq;
        }
 
-       dev_set_drvdata(&sdev->ofdev.dev, mp);
+       dev_set_drvdata(&op->dev, mp);
 
        num++;
 
@@ -1113,17 +1101,9 @@ err:
        return -ENODEV;
 }
 
-
-static int __devinit myri_sbus_probe(struct of_device *dev, const struct of_device_id *match)
-{
-       struct sbus_dev *sdev = to_sbus_device(&dev->dev);
-
-       return myri_ether_init(sdev);
-}
-
-static int __devexit myri_sbus_remove(struct of_device *dev)
+static int __devexit myri_sbus_remove(struct of_device *op)
 {
-       struct myri_eth *mp = dev_get_drvdata(&dev->dev);
+       struct myri_eth *mp = dev_get_drvdata(&op->dev);
        struct net_device *net_dev = mp->dev;
 
        unregister_netdevice(net_dev);
@@ -1131,16 +1111,16 @@ static int __devexit myri_sbus_remove(struct of_device *dev)
        free_irq(net_dev->irq, net_dev);
 
        if (mp->eeprom.cpuvers < CPUVERS_4_0) {
-               sbus_iounmap(mp->regs, mp->reg_size);
+               of_iounmap(&op->resource[0], mp->regs, mp->reg_size);
        } else {
-               sbus_iounmap(mp->cregs, PAGE_SIZE);
-               sbus_iounmap(mp->lregs, (256 * 1024));
-               sbus_iounmap(mp->lanai, (512 * 1024));
+               of_iounmap(&op->resource[0], mp->cregs, PAGE_SIZE);
+               of_iounmap(&op->resource[0], mp->lregs, (256 * 1024));
+               of_iounmap(&op->resource[0], mp->lanai, (512 * 1024));
        }
 
        free_netdev(net_dev);
 
-       dev_set_drvdata(&dev->dev, NULL);
+       dev_set_drvdata(&op->dev, NULL);
 
        return 0;
 }
@@ -1166,7 +1146,7 @@ static struct of_platform_driver myri_sbus_driver = {
 
 static int __init myri_sbus_init(void)
 {
-       return of_register_driver(&myri_sbus_driver, &sbus_bus_type);
+       return of_register_driver(&myri_sbus_driver, &of_bus_type);
 }
 
 static void __exit myri_sbus_exit(void)
index 5d93fcc95d55e7db5240b956ee3109d26331d42d..ff363e95d9cfadd7504544904042f114d4041d57 100644 (file)
@@ -288,7 +288,7 @@ struct myri_eth {
        struct myri_eeprom              eeprom;         /* Local copy of EEPROM.      */
        unsigned int                    reg_size;       /* Size of register space.    */
        unsigned int                    shmem_base;     /* Offset to shared ram.      */
-       struct sbus_dev                 *myri_sdev;     /* Our SBUS device struct.    */
+       struct of_device                *myri_op;       /* Our OF device struct.    */
 };
 
 /* We use this to acquire receive skb's that we can DMA directly into. */