int uniphier_ld20_init(const struct uniphier_board_data *bd);
#if defined(CONFIG_MICRO_SUPPORT_CARD)
-int uniphier_sbc_init_admulti(const struct uniphier_board_data *bd);
-int uniphier_sbc_init_savepin(const struct uniphier_board_data *bd);
-int uniphier_ld4_sbc_init(const struct uniphier_board_data *bd);
-int uniphier_pxs2_sbc_init(const struct uniphier_board_data *bd);
+void uniphier_sbc_init_admulti(void);
+void uniphier_sbc_init_savepin(void);
+void uniphier_ld4_sbc_init(void);
+void uniphier_pxs2_sbc_init(void);
+void uniphier_ld11_sbc_init(void);
#else
-static inline int uniphier_sbc_init_admulti(
- const struct uniphier_board_data *bd)
+static inline void uniphier_sbc_init_admulti(void)
{
- return 0;
}
-static inline int uniphier_sbc_init_savepin(
- const struct uniphier_board_data *bd)
+static inline void uniphier_sbc_init_savepin(void)
{
- return 0;
}
-static inline int uniphier_ld4_sbc_init(const struct uniphier_board_data *bd)
+static inline void uniphier_ld4_sbc_init(void)
{
- return 0;
}
-static inline int uniphier_pxs2_sbc_init(const struct uniphier_board_data *bd)
+static inline void uniphier_pxs2_sbc_init(void)
+{
+}
+
+static inline void uniphier_ld11_sbc_init(void)
{
- return 0;
}
#endif
int uniphier_ld11_init(const struct uniphier_board_data *bd)
{
- uniphier_sbc_init_savepin(bd);
- uniphier_pxs2_sbc_init(bd);
- /* pins for NAND and System Bus are multiplexed */
- if (spl_boot_device() != BOOT_DEVICE_NAND)
- uniphier_pin_init("system_bus_grp");
+ uniphier_ld11_sbc_init();
support_card_reset();
int uniphier_ld20_init(const struct uniphier_board_data *bd)
{
- uniphier_sbc_init_savepin(bd);
- uniphier_pxs2_sbc_init(bd);
- /* pins for NAND and System Bus are multiplexed */
- if (spl_boot_device() != BOOT_DEVICE_NAND)
- uniphier_pin_init("system_bus_grp");
+ uniphier_ld11_sbc_init();
support_card_reset();
{
uniphier_ld4_bcu_init(bd);
- uniphier_sbc_init_savepin(bd);
- uniphier_ld4_sbc_init(bd);
+ uniphier_ld4_sbc_init();
support_card_reset();
int uniphier_pro4_init(const struct uniphier_board_data *bd)
{
- uniphier_sbc_init_savepin(bd);
+ uniphier_sbc_init_savepin();
support_card_reset();
int uniphier_pro5_init(const struct uniphier_board_data *bd)
{
- uniphier_sbc_init_savepin(bd);
+ uniphier_sbc_init_savepin();
support_card_reset();
{
int ret;
- uniphier_sbc_init_savepin(bd);
- uniphier_pxs2_sbc_init(bd);
+ uniphier_pxs2_sbc_init();
support_card_reset();
{
uniphier_sld3_bcu_init(bd);
- uniphier_sbc_init_admulti(bd);
+ uniphier_sbc_init_admulti();
support_card_reset();
{
uniphier_ld4_bcu_init(bd);
- uniphier_sbc_init_savepin(bd);
- uniphier_ld4_sbc_init(bd);
+ uniphier_ld4_sbc_init();
support_card_reset();
# SPDX-License-Identifier: GPL-2.0+
#
-obj-$(CONFIG_ARCH_UNIPHIER_SLD3) += sbc-admulti.o
-obj-$(CONFIG_ARCH_UNIPHIER_LD4) += sbc-savepin.o sbc-ld4.o
-obj-$(CONFIG_ARCH_UNIPHIER_PRO4) += sbc-savepin.o
-obj-$(CONFIG_ARCH_UNIPHIER_SLD8) += sbc-savepin.o sbc-ld4.o
-obj-$(CONFIG_ARCH_UNIPHIER_PRO5) += sbc-savepin.o
-obj-$(CONFIG_ARCH_UNIPHIER_PXS2) += sbc-savepin.o sbc-pxs2.o
-obj-$(CONFIG_ARCH_UNIPHIER_LD6B) += sbc-savepin.o sbc-pxs2.o
-obj-$(CONFIG_ARCH_UNIPHIER_LD11) += sbc-savepin.o sbc-pxs2.o
-obj-$(CONFIG_ARCH_UNIPHIER_LD20) += sbc-savepin.o sbc-pxs2.o
+obj-y += sbc.o
+
+obj-$(CONFIG_ARCH_UNIPHIER_LD4) += sbc-ld4.o
+obj-$(CONFIG_ARCH_UNIPHIER_SLD8) += sbc-ld4.o
+obj-$(CONFIG_ARCH_UNIPHIER_PXS2) += sbc-pxs2.o
+obj-$(CONFIG_ARCH_UNIPHIER_LD6B) += sbc-pxs2.o
+obj-$(CONFIG_ARCH_UNIPHIER_LD11) += sbc-ld11.o
+obj-$(CONFIG_ARCH_UNIPHIER_LD20) += sbc-ld11.o
+++ /dev/null
-/*
- * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/io.h>
-
-#include "../init.h"
-#include "../sg-regs.h"
-#include "sbc-regs.h"
-
-#define SBCTRL0_ADMULTIPLX_PERI_VALUE 0x33120000
-#define SBCTRL1_ADMULTIPLX_PERI_VALUE 0x03005500
-#define SBCTRL2_ADMULTIPLX_PERI_VALUE 0x14000020
-
-#define SBCTRL0_ADMULTIPLX_MEM_VALUE 0x33120000
-#define SBCTRL1_ADMULTIPLX_MEM_VALUE 0x03005500
-#define SBCTRL2_ADMULTIPLX_MEM_VALUE 0x14000010
-
-int uniphier_sbc_init_admulti(const struct uniphier_board_data *bd)
-{
- /*
- * Only CS1 is connected to support card.
- * BKSZ[1:0] should be set to "01".
- */
- writel(SBCTRL0_ADMULTIPLX_MEM_VALUE, SBCTRL10);
- writel(SBCTRL1_ADMULTIPLX_MEM_VALUE, SBCTRL11);
- writel(SBCTRL2_ADMULTIPLX_MEM_VALUE, SBCTRL12);
-
- if (boot_is_swapped()) {
- /*
- * Boot Swap On: boot from external NOR/SRAM
- * 0x42000000-0x43ffffff is a mirror of 0x40000000-0x41ffffff.
- *
- * 0x40000000-0x41efffff, 0x42000000-0x43efffff: memory bank
- * 0x41f00000-0x41ffffff, 0x43f00000-0x43ffffff: peripherals
- */
- writel(0x0000bc01, SBBASE0);
- } else {
- /*
- * Boot Swap Off: boot from mask ROM
- * 0x40000000-0x41ffffff: mask ROM
- * 0x42000000-0x43efffff: memory bank (31MB)
- * 0x43f00000-0x43ffffff: peripherals (1MB)
- */
- writel(0x0000be01, SBBASE0); /* dummy */
- writel(0x0200be01, SBBASE1);
- }
-
- return 0;
-}
--- /dev/null
+/*
+ * Copyright (C) 2016-2017 Socionext Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <spl.h>
+#include <linux/io.h>
+
+#include "../init.h"
+#include "sbc-regs.h"
+
+void uniphier_ld11_sbc_init(void)
+{
+ uniphier_sbc_init_savepin();
+
+ /* necessary for ROM boot ?? */
+ /* system bus output enable */
+ writel(0x17, PC0CTRL);
+
+ /* pins for NAND and System Bus are multiplexed */
+ if (spl_boot_device() != BOOT_DEVICE_NAND)
+ uniphier_pin_init("system_bus_grp");
+}
/*
- * Copyright (C) 2011-2016 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2011-2015 Panasonic Corporation
+ * Copyright (C) 2015-2017 Socionext Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include "../init.h"
#include "sbc-regs.h"
-int uniphier_ld4_sbc_init(const struct uniphier_board_data *bd)
+void uniphier_ld4_sbc_init(void)
{
u32 tmp;
+ uniphier_sbc_init_savepin();
+
/* system bus output enable */
tmp = readl(PC0CTRL);
tmp &= 0xfffffcff;
writel(tmp, PC0CTRL);
-
- return 0;
}
/*
- * Copyright (C) 2015-2016 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2016-2017 Socionext Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include "../init.h"
#include "sbc-regs.h"
-int uniphier_pxs2_sbc_init(const struct uniphier_board_data *bd)
+void uniphier_pxs2_sbc_init(void)
{
+ uniphier_sbc_init_savepin();
+
/* necessary for ROM boot ?? */
/* system bus output enable */
writel(0x17, PC0CTRL);
-
- return 0;
}
+++ /dev/null
-/*
- * Copyright (C) 2011-2016 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <linux/io.h>
-
-#include "../init.h"
-#include "sbc-regs.h"
-
-/* slower but LED works */
-#define SBCTRL0_SAVEPIN_PERI_VALUE 0x55450000
-#define SBCTRL1_SAVEPIN_PERI_VALUE 0x07168d00
-#define SBCTRL2_SAVEPIN_PERI_VALUE 0x34000009
-#define SBCTRL4_SAVEPIN_PERI_VALUE 0x02110110
-
-/* faster but LED does not work */
-#define SBCTRL0_SAVEPIN_MEM_VALUE 0x55450000
-#define SBCTRL1_SAVEPIN_MEM_VALUE 0x06057700
-/* NOR flash needs more wait counts than SRAM */
-#define SBCTRL2_SAVEPIN_MEM_VALUE 0x34000009
-#define SBCTRL4_SAVEPIN_MEM_VALUE 0x02110210
-
-int uniphier_sbc_init_savepin(const struct uniphier_board_data *bd)
-{
- /*
- * Only CS1 is connected to support card.
- * BKSZ[1:0] should be set to "01".
- */
- writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL10);
- writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL11);
- writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL12);
- writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL14);
-
- if (boot_is_swapped()) {
- /*
- * Boot Swap On: boot from external NOR/SRAM
- * 0x42000000-0x43ffffff is a mirror of 0x40000000-0x41ffffff.
- *
- * 0x40000000-0x41efffff, 0x42000000-0x43efffff: memory bank
- * 0x41f00000-0x41ffffff, 0x43f00000-0x43ffffff: peripherals
- */
- writel(0x0000bc01, SBBASE0);
- } else {
- /*
- * Boot Swap Off: boot from mask ROM
- * 0x40000000-0x41ffffff: mask ROM
- * 0x42000000-0x43efffff: memory bank (31MB)
- * 0x43f00000-0x43ffffff: peripherals (1MB)
- */
- writel(0x0000be01, SBBASE0); /* dummy */
- writel(0x0200be01, SBBASE1);
- }
-
- return 0;
-}
--- /dev/null
+/*
+ * Copyright (C) 2011-2015 Panasonic Corporation
+ * Copyright (C) 2015-2017 Socionext Inc.
+ * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <linux/io.h>
+
+#include "../init.h"
+#include "sbc-regs.h"
+
+#define SBCTRL0_ADMULTIPLX_PERI_VALUE 0x33120000
+#define SBCTRL1_ADMULTIPLX_PERI_VALUE 0x03005500
+#define SBCTRL2_ADMULTIPLX_PERI_VALUE 0x14000020
+
+#define SBCTRL0_ADMULTIPLX_MEM_VALUE 0x33120000
+#define SBCTRL1_ADMULTIPLX_MEM_VALUE 0x03005500
+#define SBCTRL2_ADMULTIPLX_MEM_VALUE 0x14000010
+
+/* slower but LED works */
+#define SBCTRL0_SAVEPIN_PERI_VALUE 0x55450000
+#define SBCTRL1_SAVEPIN_PERI_VALUE 0x07168d00
+#define SBCTRL2_SAVEPIN_PERI_VALUE 0x34000009
+#define SBCTRL4_SAVEPIN_PERI_VALUE 0x02110110
+
+/* faster but LED does not work */
+#define SBCTRL0_SAVEPIN_MEM_VALUE 0x55450000
+#define SBCTRL1_SAVEPIN_MEM_VALUE 0x06057700
+/* NOR flash needs more wait counts than SRAM */
+#define SBCTRL2_SAVEPIN_MEM_VALUE 0x34000009
+#define SBCTRL4_SAVEPIN_MEM_VALUE 0x02110210
+
+static void __uniphier_sbc_init(int savepin)
+{
+ /*
+ * Only CS1 is connected to support card.
+ * BKSZ[1:0] should be set to "01".
+ */
+ if (savepin) {
+ writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL10);
+ writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL11);
+ writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL12);
+ writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL14);
+ } else {
+ writel(SBCTRL0_ADMULTIPLX_MEM_VALUE, SBCTRL10);
+ writel(SBCTRL1_ADMULTIPLX_MEM_VALUE, SBCTRL11);
+ writel(SBCTRL2_ADMULTIPLX_MEM_VALUE, SBCTRL12);
+ }
+
+ if (boot_is_swapped()) {
+ /*
+ * Boot Swap On: boot from external NOR/SRAM
+ * 0x42000000-0x43ffffff is a mirror of 0x40000000-0x41ffffff.
+ *
+ * 0x40000000-0x41efffff, 0x42000000-0x43efffff: memory bank
+ * 0x41f00000-0x41ffffff, 0x43f00000-0x43ffffff: peripherals
+ */
+ writel(0x0000bc01, SBBASE0);
+ } else {
+ /*
+ * Boot Swap Off: boot from mask ROM
+ * 0x40000000-0x41ffffff: mask ROM
+ * 0x42000000-0x43efffff: memory bank (31MB)
+ * 0x43f00000-0x43ffffff: peripherals (1MB)
+ */
+ writel(0x0000be01, SBBASE0); /* dummy */
+ writel(0x0200be01, SBBASE1);
+ }
+}
+
+void uniphier_sbc_init_admulti(void)
+{
+ __uniphier_sbc_init(0);
+}
+
+void uniphier_sbc_init_savepin(void)
+{
+ __uniphier_sbc_init(1);
+}