scsi: pm8001: clean up various indentation issues

There are several lines of code where the indentation is at an incorrect
level; fix these.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index d0bb357034d8bba2eaf0212cb4864df9a7717fe2..e0fee3d91d23555b14531f9bab2d868a4df6ab92 100644 (file)
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -960,9 +960,9 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
                return -1;
        }
        regVal = pm8001_cr32(pm8001_ha, 2, GPIO_GPIO_0_0UTPUT_CTL_OFFSET);
-               PM8001_INIT_DBG(pm8001_ha,
-                               pm8001_printk("GPIO Output Control Register:"
-                               " = 0x%x\n", regVal));
+       PM8001_INIT_DBG(pm8001_ha,
+                       pm8001_printk("GPIO Output Control Register:"
+                       " = 0x%x\n", regVal));
        /* set GPIO-0 output control to tri-state */
        regVal &= 0xFFFFFFFC;
        pm8001_cw32(pm8001_ha, 2, GPIO_GPIO_0_0UTPUT_CTL_OFFSET, regVal);
@@ -2928,7 +2928,7 @@ mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
                PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS\n"));
                ts->resp = SAS_TASK_COMPLETE;
                ts->stat = SAM_STAT_GOOD;
-       if (pm8001_dev)
+               if (pm8001_dev)
                        pm8001_dev->running_req--;
                break;
        case IO_ABORTED:

diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index 084f2fcced0aeb49fd987a63b02dd78fd4566b47..88eef3b18e4172074d23b8a75a620986af128128 100644 (file)
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -740,8 +740,8 @@ static int pm8001_exec_internal_tmf_task(struct domain_device *dev,
                wait_for_completion(&task->slow_task->completion);
                if (pm8001_ha->chip_id != chip_8001) {
                        pm8001_dev->setds_completion = &completion_setstate;
-                               PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
-                                       pm8001_dev, 0x01);
+                       PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
+                               pm8001_dev, 0x01);
                        wait_for_completion(&completion_setstate);
                }
                res = -TMF_RESP_FUNC_FAILED;

diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 63e4f7d34d6c3a2f59205a3c8f04dbb120aa8838..536d2b4384f8257639f5662565835e1acdb11fc7 100644 (file)
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -1316,7 +1316,7 @@ pm80xx_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
 
 static void pm80xx_hw_chip_rst(struct pm8001_hba_info *pm8001_ha)
 {
-        u32 i;
+       u32 i;
 
        PM8001_INIT_DBG(pm8001_ha,
                pm8001_printk("chip reset start\n"));
@@ -4381,27 +4381,27 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
                        sata_cmd.len = cpu_to_le32(task->total_xfer_len);
                        sata_cmd.esgl = 0;
                }
-                       /* scsi cdb */
-                       sata_cmd.atapi_scsi_cdb[0] =
-                               cpu_to_le32(((task->ata_task.atapi_packet[0]) |
-                               (task->ata_task.atapi_packet[1] << 8) |
-                               (task->ata_task.atapi_packet[2] << 16) |
-                               (task->ata_task.atapi_packet[3] << 24)));
-                       sata_cmd.atapi_scsi_cdb[1] =
-                               cpu_to_le32(((task->ata_task.atapi_packet[4]) |
-                               (task->ata_task.atapi_packet[5] << 8) |
-                               (task->ata_task.atapi_packet[6] << 16) |
-                               (task->ata_task.atapi_packet[7] << 24)));
-                       sata_cmd.atapi_scsi_cdb[2] =
-                               cpu_to_le32(((task->ata_task.atapi_packet[8]) |
-                               (task->ata_task.atapi_packet[9] << 8) |
-                               (task->ata_task.atapi_packet[10] << 16) |
-                               (task->ata_task.atapi_packet[11] << 24)));
-                       sata_cmd.atapi_scsi_cdb[3] =
-                               cpu_to_le32(((task->ata_task.atapi_packet[12]) |
-                               (task->ata_task.atapi_packet[13] << 8) |
-                               (task->ata_task.atapi_packet[14] << 16) |
-                               (task->ata_task.atapi_packet[15] << 24)));
+               /* scsi cdb */
+               sata_cmd.atapi_scsi_cdb[0] =
+                       cpu_to_le32(((task->ata_task.atapi_packet[0]) |
+                       (task->ata_task.atapi_packet[1] << 8) |
+                       (task->ata_task.atapi_packet[2] << 16) |
+                       (task->ata_task.atapi_packet[3] << 24)));
+               sata_cmd.atapi_scsi_cdb[1] =
+                       cpu_to_le32(((task->ata_task.atapi_packet[4]) |
+                       (task->ata_task.atapi_packet[5] << 8) |
+                       (task->ata_task.atapi_packet[6] << 16) |
+                       (task->ata_task.atapi_packet[7] << 24)));
+               sata_cmd.atapi_scsi_cdb[2] =
+                       cpu_to_le32(((task->ata_task.atapi_packet[8]) |
+                       (task->ata_task.atapi_packet[9] << 8) |
+                       (task->ata_task.atapi_packet[10] << 16) |
+                       (task->ata_task.atapi_packet[11] << 24)));
+               sata_cmd.atapi_scsi_cdb[3] =
+                       cpu_to_le32(((task->ata_task.atapi_packet[12]) |
+                       (task->ata_task.atapi_packet[13] << 8) |
+                       (task->ata_task.atapi_packet[14] << 16) |
+                       (task->ata_task.atapi_packet[15] << 24)));
        }
 
        /* Check for read log for failed drive and return */