arm64: tegra: Make BCM89610 PHY interrupt as active low

Need to configure PHY interrupt as active low for P3310 Tegra186
platform otherwise it results in spurious interrupts.

This issue wasn't seen before because the generic PHY driver without
interrupt support was used.

Signed-off-by: Bhadram Varka <vbhadram@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
index a8baad7b80df2d4c9bd39c38e39d3435ded8d0dc..13f57fff147742c22f889412e866dfc64a40ecd5 100644 (file)
--- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
@@ -46,7 +46,7 @@
                                compatible = "ethernet-phy-ieee802.3-c22";
                                reg = <0x0>;
                                interrupt-parent = <&gpio>;
-                               interrupts = <TEGRA_MAIN_GPIO(M, 5) IRQ_TYPE_LEVEL_HIGH>;
+                               interrupts = <TEGRA_MAIN_GPIO(M, 5) IRQ_TYPE_LEVEL_LOW>;
                        };
                };
        };