ixgbe: update PHY code to support 100Mbps as well as 1G/10G

This change updates the PHY setup code to support 100Mbps capable PHYs
as well as 10G and 1Gbps.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c
index ff23907bde0ca8d5cca5f93d2c130d4d57bd4f93..845c679c8b875bc3459e6915d7d3d7e961fa9ba3 100644 (file)
--- a/drivers/net/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ixgbe/ixgbe_82598.c
@@ -158,6 +158,7 @@ static s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw)
 
        switch (hw->phy.type) {
        case ixgbe_phy_tn:
+               phy->ops.setup_link = &ixgbe_setup_phy_link_tnx;
                phy->ops.check_link = &ixgbe_check_phy_link_tnx;
                phy->ops.get_firmware_version =
                             &ixgbe_get_phy_firmware_version_tnx;

diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c
index 9190a8fca4273cd533560f2d6f294f088b423c69..f72f705f6183ba1aaa0a0b0c2a553b086d09dbf1 100644 (file)
--- a/drivers/net/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ixgbe/ixgbe_phy.c
@@ -402,49 +402,89 @@ s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
  **/
 s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw)
 {
-       s32 status = IXGBE_NOT_IMPLEMENTED;
+       s32 status = 0;
        u32 time_out;
        u32 max_time_out = 10;
-       u16 autoneg_reg;
+       u16 autoneg_reg = IXGBE_MII_AUTONEG_REG;
+       bool autoneg = false;
+       ixgbe_link_speed speed;
 
-       /*
-        * Set advertisement settings in PHY based on autoneg_advertised
-        * settings. If autoneg_advertised = 0, then advertise default values
-        * tnx devices cannot be "forced" to a autoneg 10G and fail.  But can
-        * for a 1G.
-        */
-       hw->phy.ops.read_reg(hw, MDIO_AN_ADVERTISE, MDIO_MMD_AN, &autoneg_reg);
+       ixgbe_get_copper_link_capabilities_generic(hw, &speed, &autoneg);
+
+       if (speed & IXGBE_LINK_SPEED_10GB_FULL) {
+               /* Set or unset auto-negotiation 10G advertisement */
+               hw->phy.ops.read_reg(hw, MDIO_AN_10GBT_CTRL,
+                                    MDIO_MMD_AN,
+                                    &autoneg_reg);
 
-       if (hw->phy.autoneg_advertised == IXGBE_LINK_SPEED_1GB_FULL)
                autoneg_reg &= ~MDIO_AN_10GBT_CTRL_ADV10G;
-       else
-               autoneg_reg |= MDIO_AN_10GBT_CTRL_ADV10G;
+               if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL)
+                       autoneg_reg |= MDIO_AN_10GBT_CTRL_ADV10G;
 
-       hw->phy.ops.write_reg(hw, MDIO_AN_ADVERTISE, MDIO_MMD_AN, autoneg_reg);
+               hw->phy.ops.write_reg(hw, MDIO_AN_10GBT_CTRL,
+                                     MDIO_MMD_AN,
+                                     autoneg_reg);
+       }
+
+       if (speed & IXGBE_LINK_SPEED_1GB_FULL) {
+               /* Set or unset auto-negotiation 1G advertisement */
+               hw->phy.ops.read_reg(hw,
+                                    IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
+                                    MDIO_MMD_AN,
+                                    &autoneg_reg);
+
+               autoneg_reg &= ~IXGBE_MII_1GBASE_T_ADVERTISE;
+               if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL)
+                       autoneg_reg |= IXGBE_MII_1GBASE_T_ADVERTISE;
+
+               hw->phy.ops.write_reg(hw,
+                                     IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
+                                     MDIO_MMD_AN,
+                                     autoneg_reg);
+       }
+
+       if (speed & IXGBE_LINK_SPEED_100_FULL) {
+               /* Set or unset auto-negotiation 100M advertisement */
+               hw->phy.ops.read_reg(hw, MDIO_AN_ADVERTISE,
+                                    MDIO_MMD_AN,
+                                    &autoneg_reg);
+
+               autoneg_reg &= ~ADVERTISE_100FULL;
+               if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL)
+                       autoneg_reg |= ADVERTISE_100FULL;
+
+               hw->phy.ops.write_reg(hw, MDIO_AN_ADVERTISE,
+                                     MDIO_MMD_AN,
+                                     autoneg_reg);
+       }
 
        /* Restart PHY autonegotiation and wait for completion */
-       hw->phy.ops.read_reg(hw, MDIO_CTRL1, MDIO_MMD_AN, &autoneg_reg);
+       hw->phy.ops.read_reg(hw, MDIO_CTRL1,
+                            MDIO_MMD_AN, &autoneg_reg);
 
        autoneg_reg |= MDIO_AN_CTRL1_RESTART;
 
-       hw->phy.ops.write_reg(hw, MDIO_CTRL1, MDIO_MMD_AN, autoneg_reg);
+       hw->phy.ops.write_reg(hw, MDIO_CTRL1,
+                             MDIO_MMD_AN, autoneg_reg);
 
        /* Wait for autonegotiation to finish */
        for (time_out = 0; time_out < max_time_out; time_out++) {
                udelay(10);
                /* Restart PHY autonegotiation and wait for completion */
-               status = hw->phy.ops.read_reg(hw, MDIO_STAT1, MDIO_MMD_AN,
-                                             &autoneg_reg);
+               status = hw->phy.ops.read_reg(hw, MDIO_STAT1,
+                                             MDIO_MMD_AN,
+                                             &autoneg_reg);
 
                autoneg_reg &= MDIO_AN_STAT1_COMPLETE;
                if (autoneg_reg == MDIO_AN_STAT1_COMPLETE) {
-                       status = 0;
                        break;
                }
        }
 
-       if (time_out == max_time_out)
+       if (time_out == max_time_out) {
                status = IXGBE_ERR_LINK_SETUP;
+               hw_dbg(hw, "ixgbe_setup_phy_link_generic: time out");
+       }
 
        return status;
 }
@@ -473,6 +513,9 @@ s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
        if (speed & IXGBE_LINK_SPEED_1GB_FULL)
                hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
 
+       if (speed & IXGBE_LINK_SPEED_100_FULL)
+               hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_100_FULL;
+
        /* Setup link based on the new speed settings */
        hw->phy.ops.setup_link(hw);
 
@@ -512,6 +555,180 @@ s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw,
        return status;
 }
 
+/**
+ *  ixgbe_check_phy_link_tnx - Determine link and speed status
+ *  @hw: pointer to hardware structure
+ *
+ *  Reads the VS1 register to determine if link is up and the current speed for
+ *  the PHY.
+ **/
+s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+                            bool *link_up)
+{
+       s32 status = 0;
+       u32 time_out;
+       u32 max_time_out = 10;
+       u16 phy_link = 0;
+       u16 phy_speed = 0;
+       u16 phy_data = 0;
+
+       /* Initialize speed and link to default case */
+       *link_up = false;
+       *speed = IXGBE_LINK_SPEED_10GB_FULL;
+
+       /*
+        * Check current speed and link status of the PHY register.
+        * This is a vendor specific register and may have to
+        * be changed for other copper PHYs.
+        */
+       for (time_out = 0; time_out < max_time_out; time_out++) {
+               udelay(10);
+               status = hw->phy.ops.read_reg(hw,
+                                             MDIO_STAT1,
+                                             MDIO_MMD_VEND1,
+                                             &phy_data);
+               phy_link = phy_data &
+                           IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS;
+               phy_speed = phy_data &
+                           IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS;
+               if (phy_link == IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS) {
+                       *link_up = true;
+                       if (phy_speed ==
+                           IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS)
+                               *speed = IXGBE_LINK_SPEED_1GB_FULL;
+                       break;
+               }
+       }
+
+       return status;
+}
+
+/**
+ *     ixgbe_setup_phy_link_tnx - Set and restart autoneg
+ *     @hw: pointer to hardware structure
+ *
+ *     Restart autonegotiation and PHY and waits for completion.
+ **/
+s32 ixgbe_setup_phy_link_tnx(struct ixgbe_hw *hw)
+{
+       s32 status = 0;
+       u32 time_out;
+       u32 max_time_out = 10;
+       u16 autoneg_reg = IXGBE_MII_AUTONEG_REG;
+       bool autoneg = false;
+       ixgbe_link_speed speed;
+
+       ixgbe_get_copper_link_capabilities_generic(hw, &speed, &autoneg);
+
+       if (speed & IXGBE_LINK_SPEED_10GB_FULL) {
+               /* Set or unset auto-negotiation 10G advertisement */
+               hw->phy.ops.read_reg(hw, MDIO_AN_10GBT_CTRL,
+                                    MDIO_MMD_AN,
+                                    &autoneg_reg);
+
+               autoneg_reg &= ~MDIO_AN_10GBT_CTRL_ADV10G;
+               if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL)
+                       autoneg_reg |= MDIO_AN_10GBT_CTRL_ADV10G;
+
+               hw->phy.ops.write_reg(hw, MDIO_AN_10GBT_CTRL,
+                                     MDIO_MMD_AN,
+                                     autoneg_reg);
+       }
+
+       if (speed & IXGBE_LINK_SPEED_1GB_FULL) {
+               /* Set or unset auto-negotiation 1G advertisement */
+               hw->phy.ops.read_reg(hw, IXGBE_MII_AUTONEG_XNP_TX_REG,
+                                    MDIO_MMD_AN,
+                                    &autoneg_reg);
+
+               autoneg_reg &= ~IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX;
+               if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL)
+                       autoneg_reg |= IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX;
+
+               hw->phy.ops.write_reg(hw, IXGBE_MII_AUTONEG_XNP_TX_REG,
+                                     MDIO_MMD_AN,
+                                     autoneg_reg);
+       }
+
+       if (speed & IXGBE_LINK_SPEED_100_FULL) {
+               /* Set or unset auto-negotiation 100M advertisement */
+               hw->phy.ops.read_reg(hw, MDIO_AN_ADVERTISE,
+                                    MDIO_MMD_AN,
+                                    &autoneg_reg);
+
+               autoneg_reg &= ~ADVERTISE_100FULL;
+               if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL)
+                       autoneg_reg |= ADVERTISE_100FULL;
+
+               hw->phy.ops.write_reg(hw, MDIO_AN_ADVERTISE,
+                                     MDIO_MMD_AN,
+                                     autoneg_reg);
+       }
+
+       /* Restart PHY autonegotiation and wait for completion */
+       hw->phy.ops.read_reg(hw, MDIO_CTRL1,
+                            MDIO_MMD_AN, &autoneg_reg);
+
+       autoneg_reg |= MDIO_AN_CTRL1_RESTART;
+
+       hw->phy.ops.write_reg(hw, MDIO_CTRL1,
+                             MDIO_MMD_AN, autoneg_reg);
+
+       /* Wait for autonegotiation to finish */
+       for (time_out = 0; time_out < max_time_out; time_out++) {
+               udelay(10);
+               /* Restart PHY autonegotiation and wait for completion */
+               status = hw->phy.ops.read_reg(hw, MDIO_STAT1,
+                                             MDIO_MMD_AN,
+                                             &autoneg_reg);
+
+               autoneg_reg &= MDIO_AN_STAT1_COMPLETE;
+               if (autoneg_reg == MDIO_AN_STAT1_COMPLETE)
+                       break;
+       }
+
+       if (time_out == max_time_out) {
+               status = IXGBE_ERR_LINK_SETUP;
+               hw_dbg(hw, "ixgbe_setup_phy_link_tnx: time out");
+       }
+
+       return status;
+}
+
+/**
+ *  ixgbe_get_phy_firmware_version_tnx - Gets the PHY Firmware Version
+ *  @hw: pointer to hardware structure
+ *  @firmware_version: pointer to the PHY Firmware Version
+ **/
+s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw,
+                                      u16 *firmware_version)
+{
+       s32 status = 0;
+
+       status = hw->phy.ops.read_reg(hw, TNX_FW_REV,
+                                     MDIO_MMD_VEND1,
+                                     firmware_version);
+
+       return status;
+}
+
+/**
+ *  ixgbe_get_phy_firmware_version_generic - Gets the PHY Firmware Version
+ *  @hw: pointer to hardware structure
+ *  @firmware_version: pointer to the PHY Firmware Version
+ **/
+s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw,
+                                          u16 *firmware_version)
+{
+       s32 status = 0;
+
+       status = hw->phy.ops.read_reg(hw, AQ_FW_REV,
+                                     MDIO_MMD_VEND1,
+                                     firmware_version);
+
+       return status;
+}
+
 /**
  *  ixgbe_reset_phy_nl - Performs a PHY reset
  *  @hw: pointer to hardware structure
@@ -1476,86 +1693,6 @@ static void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw)
        ixgbe_i2c_stop(hw);
 }
 
-/**
- *  ixgbe_check_phy_link_tnx - Determine link and speed status
- *  @hw: pointer to hardware structure
- *
- *  Reads the VS1 register to determine if link is up and the current speed for
- *  the PHY.
- **/
-s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
-                             bool *link_up)
-{
-       s32 status = 0;
-       u32 time_out;
-       u32 max_time_out = 10;
-       u16 phy_link = 0;
-       u16 phy_speed = 0;
-       u16 phy_data = 0;
-
-       /* Initialize speed and link to default case */
-       *link_up = false;
-       *speed = IXGBE_LINK_SPEED_10GB_FULL;
-
-       /*
-        * Check current speed and link status of the PHY register.
-        * This is a vendor specific register and may have to
-        * be changed for other copper PHYs.
-        */
-       for (time_out = 0; time_out < max_time_out; time_out++) {
-               udelay(10);
-               status = hw->phy.ops.read_reg(hw,
-                                       IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS,
-                                       MDIO_MMD_VEND1,
-                                       &phy_data);
-               phy_link = phy_data &
-                          IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS;
-               phy_speed = phy_data &
-                           IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS;
-               if (phy_link == IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS) {
-                       *link_up = true;
-                       if (phy_speed ==
-                           IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS)
-                               *speed = IXGBE_LINK_SPEED_1GB_FULL;
-                       break;
-               }
-       }
-
-       return status;
-}
-
-/**
- *  ixgbe_get_phy_firmware_version_tnx - Gets the PHY Firmware Version
- *  @hw: pointer to hardware structure
- *  @firmware_version: pointer to the PHY Firmware Version
- **/
-s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw,
-                                       u16 *firmware_version)
-{
-       s32 status = 0;
-
-       status = hw->phy.ops.read_reg(hw, TNX_FW_REV, MDIO_MMD_VEND1,
-                                     firmware_version);
-
-       return status;
-}
-
-/**
- *  ixgbe_get_phy_firmware_version_generic - Gets the PHY Firmware Version
- *  @hw: pointer to hardware structure
- *  @firmware_version: pointer to the PHY Firmware Version
-**/
-s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw,
-                                           u16 *firmware_version)
-{
-       s32 status = 0;
-
-       status = hw->phy.ops.read_reg(hw, AQ_FW_REV, MDIO_MMD_VEND1,
-                                     firmware_version);
-
-       return status;
-}
-
 /**
  *  ixgbe_tn_check_overtemp - Checks if an overtemp occured.
  *  @hw: pointer to hardware structure

diff --git a/drivers/net/ixgbe/ixgbe_phy.h b/drivers/net/ixgbe/ixgbe_phy.h
index 9bf2783d7a740045dcb5643f53cf29b89bfafc60..197bdd13106a5398804ea0f083c088815470d9ee 100644 (file)
--- a/drivers/net/ixgbe/ixgbe_phy.h
+++ b/drivers/net/ixgbe/ixgbe_phy.h
@@ -108,6 +108,7 @@ s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw,
 s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw,
                              ixgbe_link_speed *speed,
                              bool *link_up);
+s32 ixgbe_setup_phy_link_tnx(struct ixgbe_hw *hw);
 s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw,
                                        u16 *firmware_version);
 s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw,

diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index f190a4a8faf4a58d4cf020af20dbb5764d1ec2ac..63d862d3fd90280a09d89ffc30980dcc56343d60 100644 (file)
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -1009,6 +1009,13 @@
 #define IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA     0xC30B /* PHY_XS SDA/SCL Data Reg */
 #define IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT     0xC30C /* PHY_XS SDA/SCL Status Reg */
 
+/* MII clause 22/28 definitions */
+#define IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG 0xC400 /* 1G Provisioning 1 */
+#define IXGBE_MII_AUTONEG_XNP_TX_REG             0x17   /* 1G XNP Transmit */
+#define IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX      0x4000 /* full duplex, bit:14*/
+#define IXGBE_MII_1GBASE_T_ADVERTISE             0x8000 /* full duplex, bit:15*/
+#define IXGBE_MII_AUTONEG_REG                    0x0
+
 #define IXGBE_PHY_REVISION_MASK        0xFFFFFFF0
 #define IXGBE_MAX_PHY_ADDR             32