{
struct mipi_dbi *mipi = drm_to_mipi_dbi(pipe->crtc.dev);
u8 addr_mode;
- int ret;
+ int ret, idx;
+
+ if (!drm_dev_enter(pipe->crtc.dev, &idx))
+ return;
DRM_DEBUG_KMS("\n");
ret = mipi_dbi_poweron_conditional_reset(mipi);
if (ret < 0)
- return;
+ goto out_exit;
if (ret == 1)
goto out_enable;
}
mipi_dbi_command(mipi, MIPI_DCS_SET_ADDRESS_MODE, addr_mode);
mipi_dbi_enable_flush(mipi, crtc_state, plane_state);
+out_exit:
+ drm_dev_exit(idx);
}
static const struct drm_simple_display_pipe_funcs hx8357d_pipe_funcs = {
bool swap = mipi->swap_bytes;
u16 x_start, y_start;
u16 x1, x2, y1, y2;
- int ret = 0;
+ int idx, ret = 0;
bool full;
void *tr;
if (!mipi->enabled)
return;
+ if (!drm_dev_enter(fb->dev, &idx))
+ return;
+
full = width == fb->width && height == fb->height;
DRM_DEBUG_KMS("Flushing [FB:%d] " DRM_RECT_FMT "\n", fb->base.id, DRM_RECT_ARG(rect));
err_msg:
if (ret)
dev_err_once(fb->dev->dev, "Failed to update display %d\n", ret);
+
+ drm_dev_exit(idx);
}
static void ili9225_pipe_update(struct drm_simple_display_pipe *pipe,
.y1 = 0,
.y2 = fb->height,
};
- int ret;
+ int ret, idx;
u8 am_id;
+ if (!drm_dev_enter(pipe->crtc.dev, &idx))
+ return;
+
DRM_DEBUG_KMS("\n");
mipi_dbi_hw_reset(mipi);
ret = ili9225_command(mipi, ILI9225_POWER_CONTROL_1, 0x0000);
if (ret) {
DRM_DEV_ERROR(dev, "Error sending command %d\n", ret);
- return;
+ goto out_exit;
}
ili9225_command(mipi, ILI9225_POWER_CONTROL_2, 0x0000);
ili9225_command(mipi, ILI9225_POWER_CONTROL_3, 0x0000);
mipi->enabled = true;
ili9225_fb_dirty(fb, &rect);
+out_exit:
+ drm_dev_exit(idx);
}
static void ili9225_pipe_disable(struct drm_simple_display_pipe *pipe)
DRM_DEBUG_KMS("\n");
+ /*
+ * This callback is not protected by drm_dev_enter/exit since we want to
+ * turn off the display on regular driver unload. It's highly unlikely
+ * that the underlying SPI controller is gone should this be called after
+ * unplug.
+ */
+
if (!mipi->enabled)
return;
{
struct mipi_dbi *mipi = drm_to_mipi_dbi(pipe->crtc.dev);
u8 addr_mode;
- int ret;
+ int ret, idx;
+
+ if (!drm_dev_enter(pipe->crtc.dev, &idx))
+ return;
DRM_DEBUG_KMS("\n");
ret = mipi_dbi_poweron_conditional_reset(mipi);
if (ret < 0)
- return;
+ goto out_exit;
if (ret == 1)
goto out_enable;
addr_mode |= ILI9341_MADCTL_BGR;
mipi_dbi_command(mipi, MIPI_DCS_SET_ADDRESS_MODE, addr_mode);
mipi_dbi_enable_flush(mipi, crtc_state, plane_state);
+out_exit:
+ drm_dev_exit(idx);
}
static const struct drm_simple_display_pipe_funcs ili9341_pipe_funcs = {
{
struct mipi_dbi *mipi = drm_to_mipi_dbi(pipe->crtc.dev);
u8 addr_mode;
- int ret;
+ int ret, idx;
+
+ if (!drm_dev_enter(pipe->crtc.dev, &idx))
+ return;
DRM_DEBUG_KMS("\n");
ret = mipi_dbi_poweron_conditional_reset(mipi);
if (ret < 0)
- return;
+ goto out_exit;
if (ret == 1)
goto out_enable;
addr_mode |= ILI9341_MADCTL_BGR;
mipi_dbi_command(mipi, MIPI_DCS_SET_ADDRESS_MODE, addr_mode);
mipi_dbi_enable_flush(mipi, crtc_state, plane_state);
+out_exit:
+ drm_dev_exit(idx);
}
static const struct drm_simple_display_pipe_funcs mi0283qt_pipe_funcs = {
unsigned int height = rect->y2 - rect->y1;
unsigned int width = rect->x2 - rect->x1;
bool swap = mipi->swap_bytes;
- int ret = 0;
+ int idx, ret = 0;
bool full;
void *tr;
if (!mipi->enabled)
return;
+ if (!drm_dev_enter(fb->dev, &idx))
+ return;
+
full = width == fb->width && height == fb->height;
DRM_DEBUG_KMS("Flushing [FB:%d] " DRM_RECT_FMT "\n", fb->base.id, DRM_RECT_ARG(rect));
err_msg:
if (ret)
dev_err_once(fb->dev->dev, "Failed to update display %d\n", ret);
+
+ drm_dev_exit(idx);
}
/**
.y1 = 0,
.y2 = fb->height,
};
+ int idx;
+
+ if (!drm_dev_enter(&mipi->drm, &idx))
+ return;
mipi->enabled = true;
mipi_dbi_fb_dirty(fb, &rect);
backlight_enable(mipi->backlight);
+
+ drm_dev_exit(idx);
}
EXPORT_SYMBOL(mipi_dbi_enable_flush);
u16 height = drm->mode_config.min_height;
u16 width = drm->mode_config.min_width;
size_t len = width * height * 2;
+ int idx;
+
+ if (!drm_dev_enter(drm, &idx))
+ return;
memset(mipi->tx_buf, 0, len);
(height >> 8) & 0xFF, (height - 1) & 0xFF);
mipi_dbi_command_buf(mipi, MIPI_DCS_WRITE_MEMORY_START,
(u8 *)mipi->tx_buf, len);
+
+ drm_dev_exit(idx);
}
/**
{
struct mipi_dbi *mipi = drm_to_mipi_dbi(pipe->crtc.dev);
+ if (!mipi->enabled)
+ return;
+
DRM_DEBUG_KMS("\n");
mipi->enabled = false;
u8 val, cmd = 0, parameters[64];
char *buf, *pos, *token;
unsigned int i;
- int ret;
+ int ret, idx;
+
+ if (!drm_dev_enter(&mipi->drm, &idx))
+ return -ENODEV;
buf = memdup_user_nul(ubuf, count);
- if (IS_ERR(buf))
- return PTR_ERR(buf);
+ if (IS_ERR(buf)) {
+ ret = PTR_ERR(buf);
+ goto err_exit;
+ }
/* strip trailing whitespace */
for (i = count - 1; i > 0; i--)
err_free:
kfree(buf);
+err_exit:
+ drm_dev_exit(idx);
return ret < 0 ? ret : count;
}
{
struct mipi_dbi *mipi = m->private;
u8 cmd, val[4];
+ int ret, idx;
size_t len;
- int ret;
+
+ if (!drm_dev_enter(&mipi->drm, &idx))
+ return -ENODEV;
for (cmd = 0; cmd < 255; cmd++) {
if (!mipi_dbi_command_is_read(mipi, cmd))
seq_printf(m, "%*phN\n", (int)len, val);
}
+ drm_dev_exit(idx);
+
return 0;
}
struct dma_buf_attachment *import_attach = cma_obj->base.import_attach;
struct repaper_epd *epd = drm_to_epd(fb->dev);
struct drm_rect clip;
+ int idx, ret = 0;
u8 *buf = NULL;
- int ret = 0;
+
+ if (!epd->enabled)
+ return 0;
+
+ if (!drm_dev_enter(fb->dev, &idx))
+ return -ENODEV;
/* repaper can't do partial updates */
clip.x1 = 0;
clip.y1 = 0;
clip.y2 = fb->height;
- if (!epd->enabled)
- return 0;
-
repaper_get_temperature(epd);
DRM_DEBUG("Flushing [FB:%d] st=%ums\n", fb->base.id,
epd->factored_stage_time);
buf = kmalloc_array(fb->width, fb->height, GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
+ if (!buf) {
+ ret = -ENOMEM;
+ goto out_exit;
+ }
if (import_attach) {
ret = dma_buf_begin_cpu_access(import_attach->dmabuf,
out_free:
kfree(buf);
+out_exit:
+ drm_dev_exit(idx);
return ret;
}
struct spi_device *spi = epd->spi;
struct device *dev = &spi->dev;
bool dc_ok = false;
- int i, ret;
+ int i, ret, idx;
+
+ if (!drm_dev_enter(pipe->crtc.dev, &idx))
+ return;
DRM_DEBUG_DRIVER("\n");
if (!i) {
DRM_DEV_ERROR(dev, "timeout waiting for panel to become ready.\n");
power_off(epd);
- return;
+ goto out_exit;
}
repaper_read_id(spi);
else
dev_err(dev, "wrong COG ID 0x%02x\n", ret);
power_off(epd);
- return;
+ goto out_exit;
}
/* Disable OE */
else
DRM_DEV_ERROR(dev, "panel is reported broken\n");
power_off(epd);
- return;
+ goto out_exit;
}
/* Power saving mode */
if (ret < 0) {
DRM_DEV_ERROR(dev, "failed to read chip (%d)\n", ret);
power_off(epd);
- return;
+ goto out_exit;
}
if (ret & 0x40) {
if (!dc_ok) {
DRM_DEV_ERROR(dev, "dc/dc failed\n");
power_off(epd);
- return;
+ goto out_exit;
}
/*
epd->enabled = true;
epd->partial = false;
+out_exit:
+ drm_dev_exit(idx);
}
static void repaper_pipe_disable(struct drm_simple_display_pipe *pipe)
struct spi_device *spi = epd->spi;
unsigned int line;
+ /*
+ * This callback is not protected by drm_dev_enter/exit since we want to
+ * turn off the display on regular driver unload. It's highly unlikely
+ * that the underlying SPI controller is gone should this be called after
+ * unplug.
+ */
+
+ if (!epd->enabled)
+ return;
+
DRM_DEBUG_DRIVER("\n");
epd->enabled = false;
static void st7586_fb_dirty(struct drm_framebuffer *fb, struct drm_rect *rect)
{
struct mipi_dbi *mipi = drm_to_mipi_dbi(fb->dev);
- int start, end;
- int ret = 0;
+ int start, end, idx, ret = 0;
if (!mipi->enabled)
return;
+ if (!drm_dev_enter(fb->dev, &idx))
+ return;
+
/* 3 pixels per byte, so grow clip to nearest multiple of 3 */
rect->x1 = rounddown(rect->x1, 3);
rect->x2 = roundup(rect->x2, 3);
err_msg:
if (ret)
dev_err_once(fb->dev->dev, "Failed to update display %d\n", ret);
+
+ drm_dev_exit(idx);
}
static void st7586_pipe_update(struct drm_simple_display_pipe *pipe,
.y1 = 0,
.y2 = fb->height,
};
- int ret;
+ int idx, ret;
u8 addr_mode;
+ if (!drm_dev_enter(pipe->crtc.dev, &idx))
+ return;
+
DRM_DEBUG_KMS("\n");
ret = mipi_dbi_poweron_reset(mipi);
if (ret)
- return;
+ goto out_exit;
mipi_dbi_command(mipi, ST7586_AUTO_READ_CTRL, 0x9f);
mipi_dbi_command(mipi, ST7586_OTP_RW_CTRL, 0x00);
st7586_fb_dirty(fb, &rect);
mipi_dbi_command(mipi, MIPI_DCS_SET_DISPLAY_ON);
+out_exit:
+ drm_dev_exit(idx);
}
static void st7586_pipe_disable(struct drm_simple_display_pipe *pipe)
{
struct mipi_dbi *mipi = drm_to_mipi_dbi(pipe->crtc.dev);
+ /*
+ * This callback is not protected by drm_dev_enter/exit since we want to
+ * turn off the display on regular driver unload. It's highly unlikely
+ * that the underlying SPI controller is gone should this be called after
+ * unplug.
+ */
+
DRM_DEBUG_KMS("\n");
if (!mipi->enabled)
struct drm_plane_state *plane_state)
{
struct mipi_dbi *mipi = drm_to_mipi_dbi(pipe->crtc.dev);
- int ret;
+ int ret, idx;
u8 addr_mode;
+ if (!drm_dev_enter(pipe->crtc.dev, &idx))
+ return;
+
DRM_DEBUG_KMS("\n");
ret = mipi_dbi_poweron_reset(mipi);
if (ret)
- return;
+ goto out_exit;
msleep(150);
msleep(20);
mipi_dbi_enable_flush(mipi, crtc_state, plane_state);
+out_exit:
+ drm_dev_exit(idx);
}
static const struct drm_simple_display_pipe_funcs jd_t18003_t01_pipe_funcs = {