--- /dev/null
+--- a/drivers/net/wireless/ath/debug.h
++++ b/drivers/net/wireless/ath/debug.h
+@@ -36,6 +36,7 @@
+ * @ATH_DBG_PS: power save processing
+ * @ATH_DBG_HWTIMER: hardware timer handling
+ * @ATH_DBG_BTCOEX: bluetooth coexistance
++ * @ATH_DBG_BSTUCK: stuck beacons
+ * @ATH_DBG_ANY: enable all debugging
+ *
+ * The debug level is used to control the amount and type of debugging output
+@@ -60,6 +61,7 @@ enum ATH_DEBUG {
+ ATH_DBG_HWTIMER = 0x00001000,
+ ATH_DBG_BTCOEX = 0x00002000,
+ ATH_DBG_WMI = 0x00004000,
++ ATH_DBG_BSTUCK = 0x00008000,
+ ATH_DBG_ANY = 0xffffffff
+ };
+
+--- a/drivers/net/wireless/ath/ath9k/beacon.c
++++ b/drivers/net/wireless/ath/ath9k/beacon.c
+@@ -359,11 +359,11 @@ void ath_beacon_tasklet(unsigned long da
+ sc->beacon.bmisscnt++;
+
+ if (sc->beacon.bmisscnt < BSTUCK_THRESH) {
+- ath_print(common, ATH_DBG_BEACON,
++ ath_print(common, ATH_DBG_BSTUCK,
+ "missed %u consecutive beacons\n",
+ sc->beacon.bmisscnt);
+ } else if (sc->beacon.bmisscnt >= BSTUCK_THRESH) {
+- ath_print(common, ATH_DBG_BEACON,
++ ath_print(common, ATH_DBG_BSTUCK,
+ "beacon is officially stuck\n");
+ sc->sc_flags |= SC_OP_TSF_RESET;
+ ath_reset(sc, false);
+@@ -373,7 +373,7 @@ void ath_beacon_tasklet(unsigned long da
+ }
+
+ if (sc->beacon.bmisscnt != 0) {
+- ath_print(common, ATH_DBG_BEACON,
++ ath_print(common, ATH_DBG_BSTUCK,
+ "resume beacon xmit after %u misses\n",
+ sc->beacon.bmisscnt);
+ sc->beacon.bmisscnt = 0;
--- /dev/null
+--- a/drivers/net/wireless/ath/ath9k/calib.c
++++ b/drivers/net/wireless/ath/ath9k/calib.c
+@@ -19,8 +19,7 @@
+
+ /* Common calibration code */
+
+-/* We can tune this as we go by monitoring really low values */
+-#define ATH9K_NF_TOO_LOW -60
++#define ATH9K_NF_TOO_HIGH -60
+
+ static int16_t ath9k_hw_get_nf_hist_mid(int16_t *nfCalBuffer)
+ {
+@@ -45,11 +44,35 @@ static int16_t ath9k_hw_get_nf_hist_mid(
+ return nfval;
+ }
+
+-static void ath9k_hw_update_nfcal_hist_buffer(struct ath9k_nfcal_hist *h,
++static struct ath_nf_limits *ath9k_hw_get_nf_limits(struct ath_hw *ah,
++ struct ath9k_channel *chan)
++{
++ struct ath_nf_limits *limit;
++
++ if (!chan || IS_CHAN_2GHZ(chan))
++ limit = &ah->nf_2g;
++ else
++ limit = &ah->nf_5g;
++
++ return limit;
++}
++
++static s16 ath9k_hw_get_default_nf(struct ath_hw *ah,
++ struct ath9k_channel *chan)
++{
++ return ath9k_hw_get_nf_limits(ah, chan)->nominal;
++}
++
++
++static void ath9k_hw_update_nfcal_hist_buffer(struct ath_hw *ah,
++ struct ath9k_nfcal_hist *h,
+ int16_t *nfarray)
+ {
++ struct ath_nf_limits *limit;
+ int i;
+
++ limit = ath9k_hw_get_nf_limits(ah, ah->curchan);
++
+ for (i = 0; i < NUM_NF_READINGS; i++) {
+ h[i].nfCalBuffer[h[i].currIndex] = nfarray[i];
+
+@@ -63,6 +86,9 @@ static void ath9k_hw_update_nfcal_hist_b
+ h[i].privNF =
+ ath9k_hw_get_nf_hist_mid(h[i].nfCalBuffer);
+ }
++
++ if (h[i].privNF > limit->max)
++ h[i].privNF = limit->max;
+ }
+ }
+
+@@ -104,19 +130,6 @@ void ath9k_hw_reset_calibration(struct a
+ ah->cal_samples = 0;
+ }
+
+-static s16 ath9k_hw_get_default_nf(struct ath_hw *ah,
+- struct ath9k_channel *chan)
+-{
+- struct ath_nf_limits *limit;
+-
+- if (!chan || IS_CHAN_2GHZ(chan))
+- limit = &ah->nf_2g;
+- else
+- limit = &ah->nf_5g;
+-
+- return limit->nominal;
+-}
+-
+ /* This is done for the currently configured channel */
+ bool ath9k_hw_reset_calvalid(struct ath_hw *ah)
+ {
+@@ -277,10 +290,10 @@ static void ath9k_hw_nf_sanitize(struct
+ "NF calibrated [%s] [chain %d] is %d\n",
+ (i >= 3 ? "ext" : "ctl"), i % 3, nf[i]);
+
+- if (nf[i] > limit->max) {
++ if (nf[i] > ATH9K_NF_TOO_HIGH) {
+ ath_print(common, ATH_DBG_CALIBRATE,
+ "NF[%d] (%d) > MAX (%d), correcting to MAX",
+- i, nf[i], limit->max);
++ i, nf[i], ATH9K_NF_TOO_HIGH);
+ nf[i] = limit->max;
+ } else if (nf[i] < limit->min) {
+ ath_print(common, ATH_DBG_CALIBRATE,
+@@ -326,7 +339,7 @@ bool ath9k_hw_getnf(struct ath_hw *ah, s
+
+ h = caldata->nfCalHist;
+ caldata->nfcal_pending = false;
+- ath9k_hw_update_nfcal_hist_buffer(h, nfarray);
++ ath9k_hw_update_nfcal_hist_buffer(ah, h, nfarray);
+ caldata->rawNoiseFloor = h[0].privNF;
+ return true;
+ }
--- /dev/null
+--- a/drivers/net/wireless/ath/ath9k/beacon.c
++++ b/drivers/net/wireless/ath/ath9k/beacon.c
+@@ -362,6 +362,7 @@ void ath_beacon_tasklet(unsigned long da
+ ath_print(common, ATH_DBG_BSTUCK,
+ "missed %u consecutive beacons\n",
+ sc->beacon.bmisscnt);
++ ath9k_hw_bstuck_nfcal(ah);
+ } else if (sc->beacon.bmisscnt >= BSTUCK_THRESH) {
+ ath_print(common, ATH_DBG_BSTUCK,
+ "beacon is officially stuck\n");
+--- a/drivers/net/wireless/ath/ath9k/calib.c
++++ b/drivers/net/wireless/ath/ath9k/calib.c
+@@ -65,12 +65,16 @@ static s16 ath9k_hw_get_default_nf(struc
+
+
+ static void ath9k_hw_update_nfcal_hist_buffer(struct ath_hw *ah,
+- struct ath9k_nfcal_hist *h,
++ struct ath9k_hw_cal_data *cal,
+ int16_t *nfarray)
+ {
++ struct ath_common *common = ath9k_hw_common(ah);
+ struct ath_nf_limits *limit;
++ struct ath9k_nfcal_hist *h;
++ bool high_nf_mid = false;
+ int i;
+
++ h = cal->nfCalHist;
+ limit = ath9k_hw_get_nf_limits(ah, ah->curchan);
+
+ for (i = 0; i < NUM_NF_READINGS; i++) {
+@@ -87,9 +91,38 @@ static void ath9k_hw_update_nfcal_hist_b
+ ath9k_hw_get_nf_hist_mid(h[i].nfCalBuffer);
+ }
+
+- if (h[i].privNF > limit->max)
+- h[i].privNF = limit->max;
++ if (!h[i].privNF)
++ continue;
++
++ if (h[i].privNF > limit->max) {
++ high_nf_mid = true;
++
++ ath_print(common, ATH_DBG_CALIBRATE,
++ "NFmid[%d] (%d) > MAX (%d), %s\n",
++ i, h[i].privNF, limit->max,
++ (cal->nfcal_interference ?
++ "not corrected (due to interference)" :
++ "correcting to MAX"));
++
++ /*
++ * Normally we limit the average noise floor by the
++ * hardware specific maximum here. However if we have
++ * encountered stuck beacons because of interference,
++ * we bypass this limit here in order to better deal
++ * with our environment.
++ */
++ if (!cal->nfcal_interference)
++ h[i].privNF = limit->max;
++ }
+ }
++
++ /*
++ * If the noise floor seems normal for all chains, assume that
++ * there is no significant interference in the environment anymore.
++ * Re-enable the enforcement of the NF maximum again.
++ */
++ if (!high_nf_mid)
++ cal->nfcal_interference = false;
+ }
+
+ static bool ath9k_hw_get_nf_thresh(struct ath_hw *ah,
+@@ -339,7 +372,7 @@ bool ath9k_hw_getnf(struct ath_hw *ah, s
+
+ h = caldata->nfCalHist;
+ caldata->nfcal_pending = false;
+- ath9k_hw_update_nfcal_hist_buffer(ah, h, nfarray);
++ ath9k_hw_update_nfcal_hist_buffer(ah, caldata, nfarray);
+ caldata->rawNoiseFloor = h[0].privNF;
+ return true;
+ }
+@@ -374,3 +407,26 @@ s16 ath9k_hw_getchan_noise(struct ath_hw
+ return ah->caldata->rawNoiseFloor;
+ }
+ EXPORT_SYMBOL(ath9k_hw_getchan_noise);
++
++void ath9k_hw_bstuck_nfcal(struct ath_hw *ah)
++{
++ struct ath9k_hw_cal_data *caldata = ah->caldata;
++
++ if (unlikely(!caldata))
++ return;
++
++ /*
++ * If beacons are stuck, the most likely cause is interference.
++ * Triggering a noise floor calibration at this point helps the
++ * hardware adapt to a noisy environment much faster.
++ * To ensure that we recover from stuck beacons quickly, let
++ * the baseband update the internal NF value itself, similar to
++ * what is being done after a full reset.
++ */
++ if (!caldata->nfcal_pending)
++ ath9k_hw_start_nfcal(ah, true);
++
++ caldata->nfcal_interference = true;
++}
++EXPORT_SYMBOL(ath9k_hw_bstuck_nfcal);
++
+--- a/drivers/net/wireless/ath/ath9k/calib.h
++++ b/drivers/net/wireless/ath/ath9k/calib.h
+@@ -113,6 +113,7 @@ void ath9k_hw_loadnf(struct ath_hw *ah,
+ bool ath9k_hw_getnf(struct ath_hw *ah, struct ath9k_channel *chan);
+ void ath9k_init_nfcal_hist_buffer(struct ath_hw *ah,
+ struct ath9k_channel *chan);
++void ath9k_hw_bstuck_nfcal(struct ath_hw *ah);
+ s16 ath9k_hw_getchan_noise(struct ath_hw *ah, struct ath9k_channel *chan);
+ void ath9k_hw_reset_calibration(struct ath_hw *ah,
+ struct ath9k_cal_list *currCal);
+--- a/drivers/net/wireless/ath/ath9k/hw.h
++++ b/drivers/net/wireless/ath/ath9k/hw.h
+@@ -355,6 +355,7 @@ struct ath9k_hw_cal_data {
+ int16_t rawNoiseFloor;
+ bool paprd_done;
+ bool nfcal_pending;
++ bool nfcal_interference;
+ u16 small_signal_gain[AR9300_MAX_CHAINS];
+ u32 pa_table[AR9300_MAX_CHAINS][PAPRD_TABLE_SZ];
+ struct ath9k_nfcal_hist nfCalHist[NUM_NF_READINGS];
--- /dev/null
+--- a/drivers/net/wireless/ath/ath9k/ath9k.h
++++ b/drivers/net/wireless/ath/ath9k/ath9k.h
+@@ -423,6 +423,7 @@ int ath_beaconq_config(struct ath_softc
+ #define ATH_AP_SHORT_CALINTERVAL 100 /* 100 ms */
+ #define ATH_ANI_POLLINTERVAL_OLD 100 /* 100 ms */
+ #define ATH_ANI_POLLINTERVAL_NEW 1000 /* 1000 ms */
++#define ATH_LONG_CALINTERVAL_INT 1000 /* 1000 ms */
+ #define ATH_LONG_CALINTERVAL 30000 /* 30 seconds */
+ #define ATH_RESTART_CALINTERVAL 1200000 /* 20 minutes */
+
+--- a/drivers/net/wireless/ath/ath9k/main.c
++++ b/drivers/net/wireless/ath/ath9k/main.c
+@@ -396,7 +396,12 @@ void ath_ani_calibrate(unsigned long dat
+ bool shortcal = false;
+ bool aniflag = false;
+ unsigned int timestamp = jiffies_to_msecs(jiffies);
+- u32 cal_interval, short_cal_interval;
++ u32 cal_interval, short_cal_interval, long_cal_interval;
++
++ if (ah->caldata && ah->caldata->nfcal_interference)
++ long_cal_interval = ATH_LONG_CALINTERVAL_INT;
++ else
++ long_cal_interval = ATH_LONG_CALINTERVAL;
+
+ short_cal_interval = (ah->opmode == NL80211_IFTYPE_AP) ?
+ ATH_AP_SHORT_CALINTERVAL : ATH_STA_SHORT_CALINTERVAL;
+@@ -408,7 +413,7 @@ void ath_ani_calibrate(unsigned long dat
+ ath9k_ps_wakeup(sc);
+
+ /* Long calibration runs independently of short calibration. */
+- if ((timestamp - common->ani.longcal_timer) >= ATH_LONG_CALINTERVAL) {
++ if ((timestamp - common->ani.longcal_timer) >= long_cal_interval) {
+ longcal = true;
+ ath_print(common, ATH_DBG_ANI, "longcal @%lu\n", jiffies);
+ common->ani.longcal_timer = timestamp;
projects / openwrt / staging / jow.git / commitdiff