--- /dev/null
+--- a/Rules.mak
++++ b/Rules.mak
+@@ -477,6 +477,17 @@ ifeq ($(TARGET_ARCH),microblaze)
+ SYMBOL_PREFIX=_
+ endif
+
++ifeq ($(TARGET_ARCH),ubicom32)
++ OPTIMIZATION+=-fstrict-aliasing
++ CPU_CFLAGS-$(CONFIG_UBICOM32_V3)+=-march=ubicom32v3
++ CPU_CFLAGS-$(CONFIG_UBICOM32_V4)+=-march=ubicom32v4
++ifeq ($(UCLIBC_FORMAT_FDPIC_ELF),y)
++ CPU_CFLAGS-y:=-mfdpic
++ CPU_LDFLAGS-y += -Wl,-melf32ubicom32fdpic
++endif
++
++endif
++
+ ifeq ($(TARGET_ARCH),v850)
+ SYMBOL_PREFIX=_
+ endif
+--- a/extra/Configs/Config.in
++++ b/extra/Configs/Config.in
+@@ -102,6 +102,9 @@ config TARGET_sh64
+ config TARGET_sparc
+ bool "sparc"
+
++config TARGET_ubicom32
++ bool "ubicom32"
++
+ config TARGET_v850
+ bool "v850 (BROKEN)"
+
+@@ -203,6 +206,10 @@ if TARGET_sparc
+ source "extra/Configs/Config.sparc"
+ endif
+
++if TARGET_ubicom32
++source "extra/Configs/Config.ubicom32"
++endif
++
+ if TARGET_v850
+ source "extra/Configs/Config.v850"
+ endif
+--- a/extra/Configs/Config.in.arch
++++ b/extra/Configs/Config.in.arch
+@@ -149,7 +149,7 @@ config UCLIBC_HAS_SOFT_FLOAT
+ config DO_C99_MATH
+ bool "Enable full C99 math library support"
+ depends on UCLIBC_HAS_FLOATS
+- default n
++ default y
+ help
+ If you want the uClibc math library to contain the full set C99
+ math library features, then answer Y. If you leave this set to
+--- /dev/null
++++ b/extra/Configs/Config.ubicom32
+@@ -0,0 +1,44 @@
++#
++# For a description of the syntax of this configuration file,
++# see extra/config/Kconfig-language.txt
++#
++
++config TARGET_ARCH
++ string
++ default "ubicom32"
++
++config FORCE_OPTIONS_FOR_ARCH
++ bool
++ default y
++ select ARCH_BIG_ENDIAN
++ select ARCH_HAS_NO_MMU
++
++choice
++ prompt "Target Processor Architecture"
++ default CONFIG_UC_UBICOM32_V3
++ help
++ This selects the instruction set architecture of your Ubicom32 CPU. This
++ information is used for optimizing purposes. To build a library that
++ will run on any Ubicom32 CPU, you can specify "v3" here.
++ If you pick anything other than "v3," there is no
++ guarantee that uClibc will even run on anything other than the
++ selected processor type.
++
++ You should probably select the Ubicom32 ISA that best matches the
++ CPU you will be using on your device. uClibc will be tuned
++ for that architecture.
++
++ If you don't know what to do, choose "v3"
++
++config CONFIG_UC_UBICOM32_V3
++ bool "ISA v3"
++
++config CONFIG_UC_UBICOM32_V4
++ bool "ISA v4"
++endchoice
++
++config ARCH_CFLAGS
++ string
++
++config CROSS
++ string
+--- a/include/elf.h
++++ b/include/elf.h
+@@ -337,6 +337,8 @@ typedef struct
+
+ #define EM_XSTORMY16 0xad45
+
++#define EM_UBICOM32 0xde3d /* Ubicom32; no ABI */
++
+ /* FRV magic number - no EABI available??. */
+ #define EM_CYGNUS_FRV 0x5441
+
+@@ -3063,6 +3065,55 @@ typedef Elf32_Addr Elf32_Conflict;
+ /* Keep this the last entry. */
+ #define R_XTENSA_NUM 50
+
++/* Ubicom32 ELF relocation types */
++#define R_UBICOM32_NONE 0
++#define R_UBICOM32_16 1
++#define R_UBICOM32_32 2
++#define R_UBICOM32_LO16 3
++#define R_UBICOM32_HI16 4
++#define R_UBICOM32_21_PCREL 5
++#define R_UBICOM32_24_PCREL 6
++#define R_UBICOM32_HI24 7
++#define R_UBICOM32_LO7_S 8
++#define R_UBICOM32_LO7_2_S 9
++#define R_UBICOM32_LO7_4_S 10
++#define R_UBICOM32_LO7_D 11
++#define R_UBICOM32_LO7_2_D 12
++#define R_UBICOM32_LO7_4_D 13
++#define R_UBICOM32_32_HARVARD 14
++#define R_UBICOM32_LO7_CALLI 15
++#define R_UBICOM32_LO16_CALLI 16
++#define R_UBICOM32_GOT_HI24 17
++#define R_UBICOM32_GOT_LO7_S 18
++#define R_UBICOM32_GOT_LO7_2_S 19
++#define R_UBICOM32_GOT_LO7_4_S 20
++#define R_UBICOM32_GOT_LO7_D 21
++#define R_UBICOM32_GOT_LO7_2_D 22
++#define R_UBICOM32_GOT_LO7_4_D 23
++#define R_UBICOM32_FUNCDESC_GOT_HI24 24
++#define R_UBICOM32_FUNCDESC_GOT_LO7_S 25
++#define R_UBICOM32_FUNCDESC_GOT_LO7_2_S 26
++#define R_UBICOM32_FUNCDESC_GOT_LO7_4_S 27
++#define R_UBICOM32_FUNCDESC_GOT_LO7_D 28
++#define R_UBICOM32_FUNCDESC_GOT_LO7_2_D 29
++#define R_UBICOM32_FUNCDESC_GOT_LO7_4_D 30
++#define R_UBICOM32_GOT_LO7_CALLI 31
++#define R_UBICOM32_FUNCDESC_GOT_LO7_CALLI 32
++#define R_UBICOM32_FUNCDESC_VALUE 33
++#define R_UBICOM32_FUNCDESC 34
++#define R_UBICOM32_GOTOFFSET_LO 35
++#define R_UBICOM32_GOTOFFSET_HI 36
++#define R_UBICOM32_FUNCDESC_GOTOFFSET_LO 37
++#define R_UBICOM32_FUNCDESC_GOTOFFSET_HI 38
++#define R_UBICOM32_GNU_VTINHERIT 200
++#define R_UBICOM32_GNU_VTENTRY 201
++
++/* Ubicom32 Flags. */
++#define EF_UBICOM32_V3 0x00000001 /* -fmarch=ubicom32v3 */
++#define EF_UBICOM32_V4 0x00000002 /* -fmarch=ubicom32v4 */
++#define EF_UBICOM32_PIC 0x80000000 /* -fpic */
++#define EF_UBICOM32_FDPIC 0x40000000 /* -mfdpic */
++
+ #ifdef __cplusplus
+ }
+ #endif
+--- a/include/features.h
++++ b/include/features.h
+@@ -445,4 +445,10 @@ uClibc was built without large file supp
+ # include <libc-internal.h>
+ #endif
+
++#ifndef libc_hidden_proto
++#define libc_hidden_proto(name, attrs...)
++#endif
++#ifndef libm_hidden_proto
++#define libm_hidden_proto(name, attrs...)
++#endif
+ #endif /* features.h */
+--- a/ldso/ldso/dl-startup.c
++++ b/ldso/ldso/dl-startup.c
+@@ -164,10 +164,13 @@ DL_START(unsigned long args)
+ aux_dat += 2;
+ }
+
++#if !defined __FDPIC__
+ /* locate the ELF header. We need this done as soon as possible
+ * (esp since SEND_STDERR() needs this on some platforms... */
+ if (!auxvt[AT_BASE].a_un.a_val)
+ auxvt[AT_BASE].a_un.a_val = elf_machine_load_address();
++#endif
++
+ DL_INIT_LOADADDR_BOOT(load_addr, auxvt[AT_BASE].a_un.a_val);
+ header = (ElfW(Ehdr) *) auxvt[AT_BASE].a_un.a_val;
+
+--- a/ldso/ldso/ldso.c
++++ b/ldso/ldso/ldso.c
+@@ -325,10 +325,12 @@ void _dl_get_ready_to_run(struct elf_res
+ _dl_progname = argv[0];
+ }
+
++#if 0 // blackfin does this, we do to avoid die during reloc
+ if (_start == (void *) auxvt[AT_ENTRY].a_un.a_val) {
+ _dl_dprintf(_dl_debug_file, "Standalone execution is not supported yet\n");
+ _dl_exit(1);
+ }
++#endif
+
+ /* Start to build the tables of the modules that are required for
+ * this beast to run. We start with the basic executable, and then
+--- /dev/null
++++ b/ldso/ldso/ubicom32/dl-debug.h
+@@ -0,0 +1,72 @@
++/* vi: set sw=4 ts=4: */
++/* Ubicom32 ELF shared library loader suppport
++ *
++ * Copyright (c) 2009 Ubicom Inc.
++ * Copyright (c) 1994-2000 Eric Youngdale, Peter MacDonald,
++ * David Engel, Hongjiu Lu and Mitch D'Souza
++ * Copyright (C) 2001-2004 Erik Andersen
++ *
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ * notice, this list of conditions and the following disclaimer.
++ * 2. The name of the above contributors may not be
++ * used to endorse or promote products derived from this software
++ * without specific prior written permission.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE CONTRIBUTORS ``AS IS'' AND
++ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE
++ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
++ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
++ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
++ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
++ * SUCH DAMAGE.
++ */
++
++static const char *_dl_reltypes_tab[] =
++{
++ "R_UBICOM32_NONE", /* 0 */
++ "R_UBICOM32_16",
++ "R_UBICOM32_32",
++ "R_UBICOM32_LO16",
++ "R_UBICOM32_HI16",
++ "R_UBICOM32_21_PCREL", /* 5 */
++ "R_UBICOM32_24_PCREL",
++ "R_UBICOM32_HI24",
++ "R_UBICOM32_LO7_S",
++ "R_UBICOM32_LO7_2_S",
++ "R_UBICOM32_LO7_4_S", /* 10 */
++ "R_UBICOM32_LO7_D",
++ "R_UBICOM32_LO7_2_D",
++ "R_UBICOM32_LO7_4_D",
++ "R_UBICOM32_32_HARVARD",
++ "R_UBICOM32_LO7_CALLI", /* 15 */
++ "R_UBICOM32_LO16_CALLI",
++ "R_UBICOM32_GOT_HI24",
++ "R_UBICOM32_GOT_LO7_S",
++ "R_UBICOM32_GOT_LO7_2_S"
++ "R_UBICOM32_GOT_LO7_4_S", /* 20 */
++ "R_UBICOM32_GOT_LO7_D",
++ "R_UBICOM32_GOT_LO7_2_D",
++ "R_UBICOM32_GOT_LO7_4_D",
++ "R_UBICOM32_FUNCDESC_GOT_HI24 24",
++ "R_UBICOM32_FUNCDESC_GOT_LO7_S", /* 25 */
++ "R_UBICOM32_FUNCDESC_GOT_LO7_2_S",
++ "R_UBICOM32_FUNCDESC_GOT_LO7_4_S",
++ "R_UBICOM32_FUNCDESC_GOT_LO7_D",
++ "R_UBICOM32_FUNCDESC_GOT_LO7_2_D",
++ "R_UBICOM32_FUNCDESC_GOT_LO7_4_D", /* 30 */
++ "R_UBICOM32_GOT_LO7_CALLI",
++ "R_UBICOM32_FUNCDESC_VALUE",
++ "R_UBICOM32_FUNCDESC",
++#if 1
++ [200] "R_UBICOM32_GNU_VTINHERIT" , "R_UBICOM32_GNU_VTENTRY"
++#endif
++};
+--- /dev/null
++++ b/ldso/ldso/ubicom32/dl-inlines.h
+@@ -0,0 +1,582 @@
++ /* Copyright (C) 2003, 2004 Red Hat, Inc.
++ Contributed by Alexandre Oliva <aoliva@redhat.com>
++
++This file is part of uClibc.
++
++uClibc is free software; you can redistribute it and/or modify it
++under the terms of the GNU Lesser General Public License as
++published by the Free Software Foundation; either version 2.1 of the
++License, or (at your option) any later version.
++
++uClibc is distributed in the hope that it will be useful, but WITHOUT
++ANY WARRANTY; without even the implied warranty of
++MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++Library General Public License for more details.
++
++You should have received a copy of the GNU Lesser General Public
++License along with uClibc; see the file COPYING.LIB. If not, write to
++the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139,
++USA. */
++
++//#include <bfin_sram.h>
++#define SRAM_TEST(x) 0
++#ifndef _dl_assert
++# define _dl_assert(expr)
++#endif
++
++/* Initialize a DL_LOADADDR_TYPE given a got pointer and a complete
++ load map. */
++static __always_inline void
++__dl_init_loadaddr_map (struct elf32_fdpic_loadaddr *loadaddr, Elf32_Addr dl_boot_got_pointer,
++ struct elf32_fdpic_loadmap *map)
++{
++ if (map->version != 0)
++ {
++ SEND_EARLY_STDERR ("Invalid loadmap version number\n");
++ _dl_exit(-1);
++ }
++ if (map->nsegs == 0)
++ {
++ SEND_EARLY_STDERR ("Invalid segment count in loadmap\n");
++ _dl_exit(-1);
++ }
++ loadaddr->got_value = (void*)dl_boot_got_pointer;
++ loadaddr->map = map;
++}
++
++/* Figure out how many LOAD segments there are in the given headers,
++ and allocate a block for the load map big enough for them.
++ got_value will be properly initialized later on, with INIT_GOT. */
++static __always_inline int
++__dl_init_loadaddr (struct elf32_fdpic_loadaddr *loadaddr, Elf32_Phdr *ppnt,
++ int pcnt)
++{
++ int count = 0, i;
++ size_t size;
++
++ for (i = 0; i < pcnt; i++)
++ if (ppnt[i].p_type == PT_LOAD)
++ count++;
++
++ loadaddr->got_value = 0;
++
++ size = sizeof (struct elf32_fdpic_loadmap)
++ + sizeof (struct elf32_fdpic_loadseg) * count;
++ loadaddr->map = _dl_malloc (size);
++ if (! loadaddr->map)
++ _dl_exit (-1);
++
++ loadaddr->map->version = 0;
++ loadaddr->map->nsegs = 0;
++
++ return count;
++}
++
++#if defined (__SUPPORT_LD_DEBUG__)
++extern char *_dl_debug;
++extern int _dl_debug_file;
++#endif
++
++/* Incrementally initialize a load map. */
++static __always_inline void
++__dl_init_loadaddr_hdr (struct elf32_fdpic_loadaddr loadaddr, void *addr,
++ Elf32_Phdr *phdr, int maxsegs)
++{
++ struct elf32_fdpic_loadseg *segdata;
++
++ if (loadaddr.map->nsegs == maxsegs)
++ _dl_exit (-1);
++
++ segdata = &loadaddr.map->segs[loadaddr.map->nsegs++];
++ segdata->addr = (Elf32_Addr) addr;
++ segdata->p_vaddr = phdr->p_vaddr;
++ segdata->p_memsz = phdr->p_memsz;
++
++#if defined (__SUPPORT_LD_DEBUG__)
++ {
++ if (_dl_debug)
++ _dl_dprintf(_dl_debug_file, "%i: mapped %x at %x, size %x\n",
++ loadaddr.map->nsegs-1,
++ segdata->p_vaddr, segdata->addr, segdata->p_memsz);
++ }
++#endif
++}
++
++static __always_inline void __dl_loadaddr_unmap
++(struct elf32_fdpic_loadaddr loadaddr, struct funcdesc_ht *funcdesc_ht);
++
++/* Figure out whether the given address is in one of the mapped
++ segments. */
++static __always_inline int
++__dl_addr_in_loadaddr (void *p, struct elf32_fdpic_loadaddr loadaddr)
++{
++ struct elf32_fdpic_loadmap *map = loadaddr.map;
++ int c;
++
++ for (c = 0; c < map->nsegs; c++)
++ if ((void*)map->segs[c].addr <= p
++ && (char*)p < (char*)map->segs[c].addr + map->segs[c].p_memsz)
++ return 1;
++
++ return 0;
++}
++
++static __always_inline void * _dl_funcdesc_for (void *entry_point, void *got_value);
++
++/* The hashcode handling code below is heavily inspired in libiberty's
++ hashtab code, but with most adaptation points and support for
++ deleting elements removed.
++
++ Copyright (C) 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
++ Contributed by Vladimir Makarov (vmakarov@cygnus.com). */
++
++static __always_inline unsigned long
++higher_prime_number (unsigned long n)
++{
++ /* These are primes that are near, but slightly smaller than, a
++ power of two. */
++ static const unsigned long primes[] = {
++ (unsigned long) 7,
++ (unsigned long) 13,
++ (unsigned long) 31,
++ (unsigned long) 61,
++ (unsigned long) 127,
++ (unsigned long) 251,
++ (unsigned long) 509,
++ (unsigned long) 1021,
++ (unsigned long) 2039,
++ (unsigned long) 4093,
++ (unsigned long) 8191,
++ (unsigned long) 16381,
++ (unsigned long) 32749,
++ (unsigned long) 65521,
++ (unsigned long) 131071,
++ (unsigned long) 262139,
++ (unsigned long) 524287,
++ (unsigned long) 1048573,
++ (unsigned long) 2097143,
++ (unsigned long) 4194301,
++ (unsigned long) 8388593,
++ (unsigned long) 16777213,
++ (unsigned long) 33554393,
++ (unsigned long) 67108859,
++ (unsigned long) 134217689,
++ (unsigned long) 268435399,
++ (unsigned long) 536870909,
++ (unsigned long) 1073741789,
++ (unsigned long) 2147483647,
++ /* 4294967291L */
++ ((unsigned long) 2147483647) + ((unsigned long) 2147483644),
++ };
++
++ const unsigned long *low = &primes[0];
++ const unsigned long *high = &primes[sizeof(primes) / sizeof(primes[0])];
++
++ while (low != high)
++ {
++ const unsigned long *mid = low + (high - low) / 2;
++ if (n > *mid)
++ low = mid + 1;
++ else
++ high = mid;
++ }
++
++#if 0
++ /* If we've run out of primes, abort. */
++ if (n > *low)
++ {
++ fprintf (stderr, "Cannot find prime bigger than %lu\n", n);
++ abort ();
++ }
++#endif
++
++ return *low;
++}
++
++struct funcdesc_ht
++{
++ /* Table itself. */
++ struct funcdesc_value **entries;
++
++ /* Current size (in entries) of the hash table */
++ size_t size;
++
++ /* Current number of elements. */
++ size_t n_elements;
++};
++
++static __always_inline int
++hash_pointer (const void *p)
++{
++ return (int) ((long)p >> 3);
++}
++
++static __always_inline struct funcdesc_ht *
++htab_create (void)
++{
++ struct funcdesc_ht *ht = _dl_malloc (sizeof (struct funcdesc_ht));
++
++ if (! ht)
++ return NULL;
++ ht->size = 3;
++ ht->entries = _dl_malloc (sizeof (struct funcdesc_ht_value *) * ht->size);
++ if (! ht->entries)
++ return NULL;
++
++ ht->n_elements = 0;
++
++ _dl_memset (ht->entries, 0, sizeof (struct funcdesc_ht_value *) * ht->size);
++
++ return ht;
++}
++
++/* This is only called from _dl_loadaddr_unmap, so it's safe to call
++ _dl_free(). See the discussion below. */
++static __always_inline void
++htab_delete (struct funcdesc_ht *htab)
++{
++ int i;
++
++ for (i = htab->size - 1; i >= 0; i--)
++ if (htab->entries[i])
++ _dl_free (htab->entries[i]);
++
++ _dl_free (htab->entries);
++ _dl_free (htab);
++}
++
++/* Similar to htab_find_slot, but without several unwanted side effects:
++ - Does not call htab->eq_f when it finds an existing entry.
++ - Does not change the count of elements/searches/collisions in the
++ hash table.
++ This function also assumes there are no deleted entries in the table.
++ HASH is the hash value for the element to be inserted. */
++
++static __always_inline struct funcdesc_value **
++find_empty_slot_for_expand (struct funcdesc_ht *htab, int hash)
++{
++ size_t size = htab->size;
++ unsigned int index = hash % size;
++ struct funcdesc_value **slot = htab->entries + index;
++ int hash2;
++
++ if (! *slot)
++ return slot;
++
++ hash2 = 1 + hash % (size - 2);
++ for (;;)
++ {
++ index += hash2;
++ if (index >= size)
++ index -= size;
++
++ slot = htab->entries + index;
++ if (! *slot)
++ return slot;
++ }
++}
++
++/* The following function changes size of memory allocated for the
++ entries and repeatedly inserts the table elements. The occupancy
++ of the table after the call will be about 50%. Naturally the hash
++ table must already exist. Remember also that the place of the
++ table entries is changed. If memory allocation failures are allowed,
++ this function will return zero, indicating that the table could not be
++ expanded. If all goes well, it will return a non-zero value. */
++
++static __always_inline int
++htab_expand (struct funcdesc_ht *htab)
++{
++ struct funcdesc_value **oentries;
++ struct funcdesc_value **olimit;
++ struct funcdesc_value **p;
++ struct funcdesc_value **nentries;
++ size_t nsize;
++
++ oentries = htab->entries;
++ olimit = oentries + htab->size;
++
++ /* Resize only when table after removal of unused elements is either
++ too full or too empty. */
++ if (htab->n_elements * 2 > htab->size)
++ nsize = higher_prime_number (htab->n_elements * 2);
++ else
++ nsize = htab->size;
++
++ nentries = _dl_malloc (sizeof (struct funcdesc_value *) * nsize);
++ _dl_memset (nentries, 0, sizeof (struct funcdesc_value *) * nsize);
++ if (nentries == NULL)
++ return 0;
++ htab->entries = nentries;
++ htab->size = nsize;
++
++ p = oentries;
++ do
++ {
++ if (*p)
++ *find_empty_slot_for_expand (htab, hash_pointer ((*p)->entry_point))
++ = *p;
++
++ p++;
++ }
++ while (p < olimit);
++
++#if 0 /* We can't tell whether this was allocated by the _dl_malloc()
++ built into ld.so or malloc() in the main executable or libc,
++ and calling free() for something that wasn't malloc()ed could
++ do Very Bad Things (TM). Take the conservative approach
++ here, potentially wasting as much memory as actually used by
++ the hash table, even if multiple growths occur. That's not
++ so bad as to require some overengineered solution that would
++ enable us to keep track of how it was allocated. */
++ _dl_free (oentries);
++#endif
++ return 1;
++}
++
++/* This function searches for a hash table slot containing an entry
++ equal to the given element. To delete an entry, call this with
++ INSERT = 0, then call htab_clear_slot on the slot returned (possibly
++ after doing some checks). To insert an entry, call this with
++ INSERT = 1, then write the value you want into the returned slot.
++ When inserting an entry, NULL may be returned if memory allocation
++ fails. */
++
++static __always_inline struct funcdesc_value **
++htab_find_slot (struct funcdesc_ht *htab, void *ptr, int insert)
++{
++ unsigned int index;
++ int hash, hash2;
++ size_t size;
++ struct funcdesc_value **entry;
++
++ if (htab->size * 3 <= htab->n_elements * 4
++ && htab_expand (htab) == 0)
++ return NULL;
++
++ hash = hash_pointer (ptr);
++
++ size = htab->size;
++ index = hash % size;
++
++ entry = &htab->entries[index];
++ if (!*entry)
++ goto empty_entry;
++ else if ((*entry)->entry_point == ptr)
++ return entry;
++
++ hash2 = 1 + hash % (size - 2);
++ for (;;)
++ {
++ index += hash2;
++ if (index >= size)
++ index -= size;
++
++ entry = &htab->entries[index];
++ if (!*entry)
++ goto empty_entry;
++ else if ((*entry)->entry_point == ptr)
++ return entry;
++ }
++
++ empty_entry:
++ if (!insert)
++ return NULL;
++
++ htab->n_elements++;
++ return entry;
++}
++
++void *
++_dl_funcdesc_for (void *entry_point, void *got_value)
++{
++ struct elf_resolve *tpnt = ((void**)got_value)[2];
++ struct funcdesc_ht *ht = tpnt->funcdesc_ht;
++ struct funcdesc_value **entry;
++
++ _dl_assert (got_value == tpnt->loadaddr.got_value);
++
++ if (! ht)
++ {
++ ht = htab_create ();
++ if (! ht)
++ return (void*)-1;
++ tpnt->funcdesc_ht = ht;
++ }
++
++ entry = htab_find_slot (ht, entry_point, 1);
++ if (*entry)
++ {
++ _dl_assert ((*entry)->entry_point == entry_point);
++ return _dl_stabilize_funcdesc (*entry);
++ }
++
++ *entry = _dl_malloc (sizeof (struct funcdesc_value));
++ (*entry)->entry_point = entry_point;
++ (*entry)->got_value = got_value;
++
++ return _dl_stabilize_funcdesc (*entry);
++}
++
++static __always_inline void const *
++_dl_lookup_address (void const *address)
++{
++ struct elf_resolve *rpnt;
++ struct funcdesc_value const *fd;
++
++ /* Make sure we don't make assumptions about its alignment. */
++ __asm__ ("" : "+r" (address));
++
++ if ((Elf32_Addr)address & 7)
++ /* It's not a function descriptor. */
++ return address;
++
++ fd = (struct funcdesc_value const *)address;
++
++ for (rpnt = _dl_loaded_modules; rpnt; rpnt = rpnt->next)
++ {
++ if (! rpnt->funcdesc_ht)
++ continue;
++
++ if (fd->got_value != rpnt->loadaddr.got_value)
++ continue;
++
++ address = htab_find_slot (rpnt->funcdesc_ht, (void*)fd->entry_point, 0);
++
++ if (address && *(struct funcdesc_value *const*)address == fd)
++ {
++ address = (*(struct funcdesc_value *const*)address)->entry_point;
++ break;
++ }
++ else
++ address = fd;
++ }
++
++ return address;
++}
++
++void
++__dl_loadaddr_unmap (struct elf32_fdpic_loadaddr loadaddr,
++ struct funcdesc_ht *funcdesc_ht)
++{
++ int i;
++
++ for (i = 0; i < loadaddr.map->nsegs; i++)
++ {
++ struct elf32_fdpic_loadseg *segdata;
++ ssize_t offs;
++ segdata = loadaddr.map->segs + i;
++
++#if 0 /* SRAM */
++ /* FIXME:
++ A more cleaner way is to add type for struct elf32_fdpic_loadseg,
++ and release the memory according to the type.
++ Currently, we hardcode the memory address of L1 SRAM. */
++ if ((segdata->addr & 0xff800000) == 0xff800000)
++ {
++ _dl_sram_free ((void *)segdata->addr);
++ continue;
++ }
++#endif
++ offs = (segdata->p_vaddr & ADDR_ALIGN);
++ _dl_munmap ((void*)segdata->addr - offs,
++ segdata->p_memsz + offs);
++ }
++ /* _dl_unmap is only called for dlopen()ed libraries, for which
++ calling free() is safe, or before we've completed the initial
++ relocation, in which case calling free() is probably pointless,
++ but still safe. */
++ _dl_free (loadaddr.map);
++ if (funcdesc_ht)
++ htab_delete (funcdesc_ht);
++}
++
++#if 0 /* XXX TODO will look at enabling this if we decide to add support for OCM
++ * code/data */
++// OLD BLACKFIN CODE
++static __always_inline int
++__dl_is_special_segment (Elf32_Ehdr *epnt,
++ Elf32_Phdr *ppnt)
++{
++ if (ppnt->p_type != PT_LOAD)
++ return 0;
++
++ if ((epnt->e_flags & EF_BFIN_CODE_IN_L1)
++ && !(ppnt->p_flags & PF_W)
++ && (ppnt->p_flags & PF_X))
++ return 1;
++
++ if ((epnt->e_flags & EF_BFIN_DATA_IN_L1)
++ && (ppnt->p_flags & PF_W)
++ && !(ppnt->p_flags & PF_X))
++ return 1;
++
++ /* 0xff700000, 0xff800000, 0xff900000 and 0xffa00000 are also used in
++ GNU ld and linux kernel. They need to be keep synchronized. */
++ if (ppnt->p_vaddr == 0xff700000
++ || ppnt->p_vaddr == 0xff800000
++ || ppnt->p_vaddr == 0xff900000
++ || ppnt->p_vaddr == 0xffa00000)
++ return 1;
++
++ return 0;
++}
++
++static __always_inline char *
++__dl_map_segment (Elf32_Ehdr *epnt,
++ Elf32_Phdr *ppnt,
++ int infile,
++ int flags)
++{
++ char *status, *tryaddr, *l1addr;
++ size_t size;
++
++
++ if (((epnt->e_flags & EF_BFIN_CODE_IN_L1) || ppnt->p_vaddr == 0xffa00000)
++ && !(ppnt->p_flags & PF_W)
++ && (ppnt->p_flags & PF_X)) {
++ status = (char *) _dl_mmap
++ (tryaddr = 0,
++ size = (ppnt->p_vaddr & ADDR_ALIGN) + ppnt->p_filesz,
++ LXFLAGS(ppnt->p_flags),
++ flags | MAP_EXECUTABLE | MAP_DENYWRITE,
++ infile, ppnt->p_offset & OFFS_ALIGN);
++ if (_dl_mmap_check_error(status)
++ || (tryaddr && tryaddr != status))
++ return NULL;
++ l1addr = (char *) _dl_sram_alloc (ppnt->p_filesz, L1_INST_SRAM);
++ if (l1addr != NULL)
++ _dl_dma_memcpy (l1addr, status + (ppnt->p_vaddr & ADDR_ALIGN), ppnt->p_filesz);
++ _dl_munmap (status, size);
++ if (l1addr == NULL)
++ _dl_dprintf(2, "%s:%i: L1 allocation failed\n", _dl_progname, __LINE__);
++ return l1addr;
++ }
++
++ if (((epnt->e_flags & EF_BFIN_DATA_IN_L1)
++ || ppnt->p_vaddr == 0xff700000
++ || ppnt->p_vaddr == 0xff800000
++ || ppnt->p_vaddr == 0xff900000)
++ && (ppnt->p_flags & PF_W)
++ && !(ppnt->p_flags & PF_X)) {
++ if (ppnt->p_vaddr == 0xff800000)
++ l1addr = (char *) _dl_sram_alloc (ppnt->p_memsz, L1_DATA_A_SRAM);
++ else if (ppnt->p_vaddr == 0xff900000)
++ l1addr = (char *) _dl_sram_alloc (ppnt->p_memsz, L1_DATA_B_SRAM);
++ else
++ l1addr = (char *) _dl_sram_alloc (ppnt->p_memsz, L1_DATA_SRAM);
++ if (l1addr == NULL) {
++ _dl_dprintf(2, "%s:%i: L1 allocation failed\n", _dl_progname, __LINE__);
++ } else {
++ if (_DL_PREAD (infile, l1addr, ppnt->p_filesz, ppnt->p_offset) != ppnt->p_filesz) {
++ _dl_sram_free (l1addr);
++ return NULL;
++ }
++ if (ppnt->p_filesz < ppnt->p_memsz)
++ _dl_memset (l1addr + ppnt->p_filesz, 0, ppnt->p_memsz - ppnt->p_filesz);
++ }
++ return l1addr;
++ }
++ return 0;
++}
++#endif
+--- /dev/null
++++ b/ldso/ldso/ubicom32/dl-startup.h
+@@ -0,0 +1,232 @@
++/*
++ Copyright (C) 2009 Ubicom, Inc.
++ Copyright (C) 2003 Red Hat, Inc.
++ Contributed by Alexandre Oliva <aoliva@redhat.com>
++
++This file is part of uClibc.
++
++uClibc is free software; you can redistribute it and/or modify it
++under the terms of the GNU Lesser General Public License as
++published by the Free Software Foundation; either version 2.1 of the
++License, or (at your option) any later version.
++
++uClibc is distributed in the hope that it will be useful, but WITHOUT
++ANY WARRANTY; without even the implied warranty of
++MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++Library General Public License for more details.
++
++You should have received a copy of the GNU Lesser General Public
++License along with uClibc; see the file COPYING.LIB. If not, write to
++the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139,
++USA. */
++
++/* Any assembly language/system dependent hacks needed to setup
++ * boot1.c so it will work as expected and cope with whatever platform
++ * specific wierdness is needed for this architecture.
++
++ * We override the default _dl_boot function, and replace it with a
++ * bit of asm. Then call the real _dl_boot function, which is now
++ * named _dl_boot2. */
++
++/* At program start-up, p0 contains a pointer to a
++ elf32_fdpic_loadmap that describes how the executable was loaded
++ into memory. p1 contains a pointer to the interpreter (our!)
++ loadmap, if there is an interpreter, or 0 if we're being run as an
++ executable. p2 holds a pointer to the interpreter's dynamic
++ section, if there is an interpreter, or to the executable's dynamic
++ section, otherwise. If the executable is not dynamic, gr18 is 0.
++
++ We rely on the fact that the linker adds a pointer to the
++ _GLOBAL_OFFSET_TABLE_ as the last ROFIXUP entry, and that
++ __self_reloc returns the relocated pointer to us, so that we can
++ use this value to initialize the PIC register. */
++
++
++/*
++ * _dl_boot is the entry point for ldso.
++ *
++ * The kernel leaves the main apps args on the stack (positive offsets), and
++ * communicates the load maps as follows
++ *
++ * - d1 is set to the exec_map_addr (struct elf32_fdpic_loadmap *), which is the
++ * current state of the mapped application.
++ *
++ * - d2 is set to interp_map_addr (struct elf32_fdpic_loadmap *), which is use
++ * by ldso to relocate itself.
++ *
++ * - d3 is dynamic_addr which as far as I can tell is the stack pointer.
++ *
++ * - a1 is set to zero and will later be initialised to ldso _dl_fini funcdesc
++ */
++
++__asm__(
++ " .text \n\t"
++ " .global _start \n\t"
++ " .type _start,@function \n\t"
++ "_start:\n\t"
++ /*
++ * Jump to .Lcall storing the location .Lcall in a5
++ */
++ " call a5, .Lcall \n\t"
++ ".Lcall: \n\t"
++ /*
++ * Reserve and Push inputs to stack.
++ * 32 byte stack layout as follows
++ * offset 0 exec_map_addr
++ * 4 interp_map_addr
++ * 8 dynamic_addr
++ * 12 not used
++ * 16 dl_main_funcdesc structure for _dl_boot
++ * (12 bytes sizeof funcdesc_value)
++ * 28 reserved
++ * 32 start of &original stack
++ */
++ " pdec sp, 32(sp); reserve stack space \n\t"
++ " move.4 0(sp), d1 ; exec_map_addr \n\t"
++ " move.4 4(sp), d2 ; interp_map_addr \n\t"
++ " move.4 8(sp), d3; dynamic_addr \n\t"
++
++ /*
++ * Load linker version of .Lcall in to d0
++ */
++ " moveai a3, #%hi(.Lcall) \n\t"
++ " lea.1 d0, %lo(.Lcall)(a3) \n\t"
++
++ /*
++ * Determine the offset from loaded .Lcall and put it in d0.
++ */
++ " sub.4 d0, a5, d0 \n\t"
++
++ /*
++ * Load linker version of __ROFIXUP_LIST__ and __ROFIXUP_END__ in to d1
++ * and d2.
++ */
++ " moveai a3, #%hi(__ROFIXUP_LIST__) \n\t"
++ " lea.1 d1, %lo(__ROFIXUP_LIST__)(a3) \n\t"
++ " moveai a3, #%hi(__ROFIXUP_END__) \n\t"
++ " lea.1 d2, %lo(__ROFIXUP_END__)(a3) \n\t"
++ /*
++ * Use offset determined above to find the loaded versions.
++ */
++ " add.4 d1, d1, d0 \n\t"
++ " add.4 d2, d2, d0 \n\t"
++
++ /*
++ * Load interp_map_addr into d0, if interp_map_addr is null use
++ * exec_map_addr.
++ */
++ " move.4 d0, 4(sp) ; load interp_map_addr \n\t"
++ " cmpi d0, #0 \n\t"
++ " jmpne.f 1f \n\t"
++ " move.4 d0, 0(sp) ; load exec_map_addr \n\t"
++
++ /*
++ * call __self_reloc(map, void ***p, void ***e)
++ * it returns the the GOT in d0.
++ */
++ "1: call a5, __self_reloc ; returns a0 in d0 \n\t"
++ " move.4 a0, d0 ; set GOT \n\t"
++ " move.4 a2, d0 ; save GOT \n\t"
++
++ /*
++ * now setup to call
++ * _dl_start (Elf32_Addr dl_boot_got_pointer, (d0)
++ * struct elf32_fdpic_loadmap *dl_boot_progmap, (d1)
++ * struct elf32_fdpic_loadmap *dl_boot_ldsomap, (d2)
++ * Elf32_Dyn *dl_boot_ldso_dyn_pointer, (d3)
++ * struct funcdesc_value *dl_main_funcdesc, (d4)
++ * unsigned long args (d5)
++ *
++ * NOTE: for dl_main_funcdesc we reserved space on the stack for this
++ * structure.
++ */
++ " move.4 d1, 0(sp) ; d1 = exec_map_addr \n\t"
++ " move.4 d2, 4(sp) ; d2 = interp_map_addr \n\t"
++ " move.4 d3, 8(sp) ; d3 = dynamic_addr \n\t"
++ " lea.1 d4, 16(sp) ; d4 = &dl_main_funcdesc \n\t"
++ " lea.1 d5, 32(sp) ; d5 = original stack ptr (args)\n\t"
++ " call a5, _dl_start \n\t"
++
++ /*
++ * Setup to call the main entry point, starting with passing our FINI
++ * ptr() to the user in a1 (remember we saved the got in a2)
++ */
++ " movei d15, #%got_funcdesc_lo(_dl_fini) \n\t"
++ " move.4 a1, (a2, d15) \n\t"
++
++ /*
++ * restore the load map from the kernel.
++ */
++ " move.4 d1, 0(sp) ; restore exec_map_addr \n\t"
++ " move.4 d2, 4(sp) ; restore interp_map_addr \n\t"
++ " move.4 d3, 8(sp) ; restore dynamic_addr \n\t"
++
++ /*
++ * _dl_start returned the main apps entry point in dl_main_funcdesc,
++ * load that information now.
++ */
++ " move.4 a5, 16(sp) ; a5 = dl_main_funcdesc.entry_point \n\t"
++ " move.4 a0, 20(sp) ; a0 = dl_main_funcdesc.got_value \n\t"
++ " lea.1 sp, 32(sp); restore original stack ptr (args) \n\t"
++ " calli a5, 0(a5) \n\t"
++ " bkpt -1; should never get here \n\t"
++ " .size _start, . - _start \n\t"
++);
++
++#undef DL_START
++#define DL_START(X) \
++static void __attribute__ ((used)) \
++_dl_start (Elf32_Addr dl_boot_got_pointer, \
++ struct elf32_fdpic_loadmap *dl_boot_progmap, \
++ struct elf32_fdpic_loadmap *dl_boot_ldsomap, \
++ Elf32_Dyn *dl_boot_ldso_dyn_pointer, \
++ struct funcdesc_value *dl_main_funcdesc, \
++ X)
++
++struct elf32_fdpic_loadmap;
++
++/*
++ * Get a pointer to the argv array. On many platforms this can be just
++ * the address if the first argument, on other platforms we need to
++ * do something a little more subtle here.
++ */
++#define GET_ARGV(ARGVP, ARGS) ARGVP = (((unsigned long*) ARGS) + 1)
++
++/*
++ * Here is a macro to perform a relocation. This is only used when
++ * bootstrapping the dynamic loader. RELP is the relocation that we
++ * are performing, REL is the pointer to the address we are relocating.
++ * SYMBOL is the symbol involved in the relocation, and LOAD is the
++ * load address.
++ */
++#define PERFORM_BOOTSTRAP_RELOC(RELP,REL,SYMBOL,LOAD,SYMTAB) \
++ switch(ELF32_R_TYPE((RELP)->r_info)){ \
++ case R_UBICOM32_32: \
++ *(REL) += (SYMBOL); \
++ break; \
++ case R_UBICOM32_FUNCDESC_VALUE: \
++ { \
++ struct funcdesc_value fv = { \
++ (void*)((SYMBOL) + *(REL)), \
++ (LOAD).got_value \
++ }; \
++ *(struct funcdesc_value volatile *)(REL) = fv; \
++ break; \
++ } \
++ default: \
++ _dl_exit(1); \
++ }
++
++/*
++ * Transfer control to the user's application, once the dynamic loader
++ * is done. We return the address of the function's entry point to
++ * _dl_boot, see boot1_arch.h.
++ */
++#define START() do { \
++ struct elf_resolve *exec_mod = _dl_loaded_modules; \
++ dl_main_funcdesc->entry_point = _dl_elf_main; \
++ while (exec_mod->libtype != elf_executable) \
++ exec_mod = exec_mod->next; \
++ dl_main_funcdesc->got_value = exec_mod->loadaddr.got_value; \
++ return; \
++} while (0)
+--- /dev/null
++++ b/ldso/ldso/ubicom32/dl-syscalls.h
+@@ -0,0 +1,206 @@
++/* Copyright (C) 2003, 2004 Red Hat, Inc.
++ Contributed by Alexandre Oliva <aoliva@redhat.com>
++
++This file is part of uClibc.
++
++uClibc is free software; you can redistribute it and/or modify it
++under the terms of the GNU Lesser General Public License as
++published by the Free Software Foundation; either version 2.1 of the
++License, or (at your option) any later version.
++
++uClibc is distributed in the hope that it will be useful, but WITHOUT
++ANY WARRANTY; without even the implied warranty of
++MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++Library General Public License for more details.
++
++You should have received a copy of the GNU Lesser General Public
++License along with uClibc; see the file COPYING.LIB. If not, write to
++the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139,
++USA. */
++
++/* We can't use the real errno in ldso, since it has not yet
++ * been dynamicly linked in yet. */
++#include "sys/syscall.h"
++extern int _dl_errno;
++#undef __set_errno
++#define __set_errno(X) {(_dl_errno) = (X);}
++#include <sys/mman.h>
++
++/* The code below is extracted from libc/sysdeps/linux/frv/_mmap.c */
++
++#if defined(DYNAMIC_LOADER_IN_SIMULATOR) && DYNAMIC_LOADER_IN_SIMULATOR
++#define __NR___syscall_mmap2 __NR_mmap2
++static __inline__ _syscall6(__ptr_t, __syscall_mmap2, __ptr_t, addr,
++ size_t, len, int, prot, int, flags, int, fd, off_t, offset);
++
++/* Make sure we don't get another definition of _dl_mmap from the
++ machine-independent code. */
++#undef __NR_mmap
++#undef __NR_mmap2
++
++/* This is always 12, even on architectures where PAGE_SHIFT != 12. */
++# ifndef MMAP2_PAGE_SHIFT
++# define MMAP2_PAGE_SHIFT 12
++# endif
++
++#include <bits/uClibc_page.h> /* for PAGE_SIZE */
++static __always_inline void *_dl_memset(void*,int,size_t);
++static __always_inline ssize_t _dl_pread(int fd, void *buf, size_t count, off_t offset);
++
++static __ptr_t
++_dl_mmap(__ptr_t addr, size_t len, int prot, int flags, int fd, __off_t offset)
++{
++ size_t plen = (len + PAGE_SIZE - 1) & -PAGE_SIZE;
++
++/* This is a hack to enable the dynamic loader to run within a
++ simulator that doesn't support mmap, with a number of very ugly
++ tricks. Also, it's not as useful as it sounds, since only dynamic
++ executables without DT_NEEDED dependencies can be run. AFAIK, they
++ can only be created with -pie. This trick suffices to enable the
++ dynamic loader to obtain a blank page that it maps early in the
++ bootstrap. */
++ if ((flags & MAP_FIXED) == 0)
++ {
++ void *_dl_mmap_base = 0;
++ __ptr_t *ret = 0;
++
++ if (! _dl_mmap_base)
++ {
++ void *stack;
++ __asm__ ("mov sp, %0" : "=r" (stack));
++ _dl_mmap_base = (void *)(((long)stack + 2 * PAGE_SIZE) & -PAGE_SIZE);
++ retry:
++ if (((void **)_dl_mmap_base)[0] == _dl_mmap_base
++ && ((void **)_dl_mmap_base)[1023] == _dl_mmap_base
++ && (((void **)_dl_mmap_base)[177]
++ == ((void **)_dl_mmap_base)[771]))
++ {
++ while (((void**)_dl_mmap_base)[177])
++ {
++ _dl_mmap_base = ((void**)_dl_mmap_base)[177];
++ if (!(((void **)_dl_mmap_base)[0] == _dl_mmap_base
++ && ((void **)_dl_mmap_base)[1023] == _dl_mmap_base
++ && (((void **)_dl_mmap_base)[177]
++ == ((void**)_dl_mmap_base)[771])))
++ ((void(*)())0)();
++ }
++ }
++ else
++ {
++ int i;
++ for (i = 0; i < (int)PAGE_SIZE; i++)
++ if (*(char*)(_dl_mmap_base + i))
++ break;
++ if (i != PAGE_SIZE)
++ {
++ _dl_mmap_base = (void*)((long)_dl_mmap_base + PAGE_SIZE);
++ goto retry;
++ }
++ ((void**)_dl_mmap_base)[-1] =
++ ((void**)_dl_mmap_base)[0] =
++ ((void**)_dl_mmap_base)[1023] =
++ _dl_mmap_base;
++ }
++ }
++
++ if (_dl_mmap_base)
++ {
++ if (!(((void **)_dl_mmap_base)[0] == _dl_mmap_base
++ && ((void **)_dl_mmap_base)[1023] == _dl_mmap_base
++ && (((void **)_dl_mmap_base)[177]
++ == ((void**)_dl_mmap_base)[771])))
++ ((void(*)())0)();
++ ret = (__ptr_t)((char*)_dl_mmap_base + PAGE_SIZE);
++ _dl_mmap_base =
++ ((void**)_dl_mmap_base)[177] =
++ ((void**)_dl_mmap_base)[771] =
++ (char*)_dl_mmap_base + plen + PAGE_SIZE;
++ ((void**)_dl_mmap_base)[0] =
++ ((void**)_dl_mmap_base)[1023] =
++ _dl_mmap_base;
++ }
++
++ if ((flags & MAP_ANONYMOUS) != 0)
++ {
++ _dl_memset (ret, 0, plen);
++ return ret;
++ }
++
++ flags |= MAP_FIXED;
++ addr = ret;
++ }
++ if (offset & ((1 << MMAP2_PAGE_SHIFT) - 1)) {
++#if 0
++ __set_errno (EINVAL);
++#endif
++ return MAP_FAILED;
++ }
++ if ((flags & MAP_FIXED) != 0)
++ {
++ if (_dl_pread(fd, addr, len, offset) != (ssize_t)len)
++ return (void*)MAP_FAILED;
++ if (plen != len)
++ _dl_memset (addr + len, 0, plen - len);
++ return addr;
++ }
++ return(__syscall_mmap2(addr, len, prot, flags, fd, (off_t) (offset >> MMAP2_PAGE_SHIFT)));
++}
++#endif
++
++#ifdef __NR_pread64
++#ifdef DYNAMIC_LOADER_IN_SIMULATOR
++#include <unistd.h>
++
++#define __NR___syscall_lseek __NR_lseek
++static __always_inline unsigned long _dl_read(int fd, const void *buf, unsigned long count);
++
++static __always_inline _syscall3(__off_t, __syscall_lseek, int, fd, __off_t, offset,
++ int, whence);
++static __always_inline ssize_t
++_dl_pread(int fd, void *buf, size_t count, off_t offset)
++{
++ __off_t orig = __syscall_lseek (fd, 0, SEEK_CUR);
++ ssize_t ret;
++
++ if (orig == -1)
++ return -1;
++
++ if (__syscall_lseek (fd, offset, SEEK_SET) != offset)
++ return -1;
++
++ ret = _dl_read (fd, buf, count);
++
++ if (__syscall_lseek (fd, orig, SEEK_SET) != orig)
++ ((void(*)())0)();
++
++ return ret;
++}
++#else
++#define __NR___syscall_pread __NR_pread64
++static __always_inline _syscall5(ssize_t, __syscall_pread, int, fd, void *, buf,
++ size_t, count, off_t, offset_hi, off_t, offset_lo);
++
++static __always_inline ssize_t
++_dl_pread(int fd, void *buf, size_t count, off_t offset)
++{
++ return(__syscall_pread(fd,buf,count,__LONG_LONG_PAIR (offset >> 31, offset)));
++}
++#endif
++#endif
++
++#ifdef __NR_sram_alloc
++#define __NR__dl_sram_alloc __NR_sram_alloc
++static __always_inline _syscall2(__ptr_t, _dl_sram_alloc,
++ size_t, len, unsigned long, flags);
++#endif
++
++#ifdef __NR_sram_free
++#define __NR__dl_sram_free __NR_sram_free
++static __always_inline _syscall1(int, _dl_sram_free, __ptr_t, addr);
++#endif
++
++#ifdef __NR_dma_memcpy
++#define __NR__dl_dma_memcpy __NR_dma_memcpy
++static __always_inline _syscall3(__ptr_t, _dl_dma_memcpy,
++ __ptr_t, dest, __ptr_t, src, size_t, len);
++#endif
+--- /dev/null
++++ b/ldso/ldso/ubicom32/dl-sysdep.h
+@@ -0,0 +1,243 @@
++ /* Copyright (C) 2003, 2004 Red Hat, Inc.
++ Contributed by Alexandre Oliva <aoliva@redhat.com>
++ Based on ../i386/dl-sysdep.h
++
++This file is part of uClibc.
++
++uClibc is free software; you can redistribute it and/or modify it
++under the terms of the GNU Lesser General Public License as
++published by the Free Software Foundation; either version 2.1 of the
++License, or (at your option) any later version.
++
++uClibc is distributed in the hope that it will be useful, but WITHOUT
++ANY WARRANTY; without even the implied warranty of
++MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++Library General Public License for more details.
++
++You should have received a copy of the GNU Lesser General Public
++License along with uClibc; see the file COPYING.LIB. If not, write to
++the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139,
++USA. */
++
++/*
++ * Various assembly language/system dependent hacks that are required
++ * so that we can minimize the amount of platform specific code.
++ */
++
++/*
++ * Define this if the system uses RELOCA.
++ */
++#undef ELF_USES_RELOCA
++
++/* JMPREL relocs are inside the DT_RELA table. */
++#define ELF_MACHINE_PLTREL_OVERLAP
++
++#define DL_NO_COPY_RELOCS
++
++#define HAVE_DL_INLINES_H
++
++/*
++ * Initialization sequence for a GOT. Copy the resolver function
++ * descriptor and the pointer to the elf_resolve/link_map data
++ * structure. Initialize the got_value in the module while at that.
++ */
++#define INIT_GOT(GOT_BASE,MODULE) \
++{ \
++ (MODULE)->loadaddr.got_value = (GOT_BASE); \
++ GOT_BASE[0] = ((unsigned long *)&_dl_linux_resolve)[0]; \
++ GOT_BASE[1] = ((unsigned long *)&_dl_linux_resolve)[1]; \
++ GOT_BASE[2] = (unsigned long) MODULE; \
++}
++
++/* Here we define the magic numbers that this dynamic loader should accept */
++#define MAGIC1 EM_UBICOM32
++#undef MAGIC2
++
++/* Used for error messages */
++#define ELF_TARGET "UBICOM32"
++
++struct elf_resolve;
++
++struct funcdesc_value
++{
++ void *entry_point;
++ void *got_value;
++/*int relocation; not sure if this required, but it does exist */
++};
++
++extern int _dl_linux_resolve(void) __attribute__((__visibility__("hidden")));
++extern struct funcdesc_value volatile *__attribute__((__visibility__("hidden")))
++ _dl_linux_resolver (struct elf_resolve *tpnt, int reloc_entry);
++
++/* 4KiB page alignment. Should perhaps be made dynamic using
++ getpagesize(), based on AT_PAGESZ from auxvt? */
++#define PAGE_ALIGN 0xfffff000
++#define ADDR_ALIGN 0xfff
++#define OFFS_ALIGN 0x7ffff000
++
++struct funcdesc_ht;
++
++/*
++ * This asm does a quick relcation of string S (which is stored in the text
++ * section as thats all we can use
++ */
++#undef SEND_EARLY_STDERR
++#define SEND_EARLY_STDERR(S) \
++do { \
++ static const char __attribute__((section(".text"))) __s[] = (S); \
++ const char *__p, *__scratch; \
++ __asm__ ( \
++ " call a3, 1f; \n\t" \
++ "1: movei %0, #%%got_lo(1b) \n\t" \
++ " move.4 %0, (%3, %0) \n\t" \
++ " sub.4 %1, a3, %0; \n\t" \
++ " add.4 %1, %1, %2; \n\t" \
++ : "=&d" (__scratch), "=&d" (__p) \
++ : "d" (__s), "a" (dl_boot_got_pointer) \
++ : "a3", "a4", "d15"); \
++ SEND_STDERR (__p); \
++ { int __t; \
++ for (__t = 0; __t < 0x100000; __t++) __asm__ __volatile__ (""); } \
++} while (0)
++
++#define DL_LOADADDR_TYPE struct elf32_fdpic_loadaddr
++
++#define DL_RELOC_ADDR(LOADADDR, ADDR) \
++ ((ElfW(Addr))__reloc_pointer ((void*)(ADDR), (LOADADDR).map))
++
++#define DL_ADDR_TO_FUNC_PTR(ADDR, LOADADDR) \
++ ((void(*)(void)) _dl_funcdesc_for ((void*)(ADDR), (LOADADDR).got_value))
++
++#define _dl_stabilize_funcdesc(val) \
++ ({ __asm__ ("" : "+m" (*(val))); (val); })
++
++#define DL_CALL_FUNC_AT_ADDR(ADDR, LOADADDR, SIGNATURE, ...) \
++ ({ struct funcdesc_value fd = { (void*)(ADDR), (LOADADDR).got_value }; \
++ void (*pf)(void) = (void*) _dl_stabilize_funcdesc (&fd); \
++ (* SIGNATURE pf)(__VA_ARGS__); })
++
++#define DL_INIT_LOADADDR_BOOT(LOADADDR, BASEADDR) \
++ (__dl_init_loadaddr_map (&(LOADADDR), dl_boot_got_pointer, \
++ dl_boot_ldsomap ?: dl_boot_progmap))
++
++#define DL_INIT_LOADADDR_PROG(LOADADDR, BASEADDR) \
++ (__dl_init_loadaddr_map (&(LOADADDR), 0, dl_boot_progmap))
++
++#define DL_INIT_LOADADDR_EXTRA_DECLS \
++ int dl_init_loadaddr_load_count;
++#define DL_INIT_LOADADDR(LOADADDR, BASEADDR, PHDR, PHDRCNT) \
++ (dl_init_loadaddr_load_count = \
++ __dl_init_loadaddr (&(LOADADDR), (PHDR), (PHDRCNT)))
++#define DL_INIT_LOADADDR_HDR(LOADADDR, ADDR, PHDR) \
++ (__dl_init_loadaddr_hdr ((LOADADDR), (ADDR), (PHDR), \
++ dl_init_loadaddr_load_count))
++#define DL_LOADADDR_UNMAP(LOADADDR, LEN) \
++ (__dl_loadaddr_unmap ((LOADADDR), (NULL)))
++#define DL_LIB_UNMAP(LIB, LEN) \
++ (__dl_loadaddr_unmap ((LIB)->loadaddr, (LIB)->funcdesc_ht))
++#define DL_LOADADDR_BASE(LOADADDR) \
++ ((LOADADDR).got_value)
++
++/* This is called from dladdr(), such that we map a function
++ descriptor's address to the function's entry point before trying to
++ find in which library it's defined. */
++#define DL_LOOKUP_ADDRESS(ADDRESS) (_dl_lookup_address (ADDRESS))
++
++#define DL_ADDR_IN_LOADADDR(ADDR, TPNT, TFROM) \
++ (! (TFROM) && __dl_addr_in_loadaddr ((void*)(ADDR), (TPNT)->loadaddr))
++
++/*
++ * Compute the GOT address. On several platforms, we use assembly
++ * here. on FR-V FDPIC, there's no way to compute the GOT address,
++ * since the offset between text and data is not fixed, so we arrange
++ * for the assembly _dl_boot to pass this value as an argument to
++ * _dl_boot. */
++#define DL_BOOT_COMPUTE_GOT(got) ((got) = dl_boot_got_pointer)
++
++#define DL_BOOT_COMPUTE_DYN(dpnt, got, load_addr) \
++ ((dpnt) = dl_boot_ldso_dyn_pointer)
++
++/* We only support loading FDPIC independently-relocatable shared
++ libraries. It probably wouldn't be too hard to support loading
++ shared libraries that require relocation by the same amount, but we
++ don't know that they exist or would be useful, and the dynamic
++ loader code could leak the whole-library map unless we keeping a
++ bit more state for DL_LOADADDR_UNMAP and DL_LIB_UNMAP, so let's
++ keep things simple for now. */
++#define DL_CHECK_LIB_TYPE(epnt, piclib, _dl_progname, libname) \
++do \
++{ \
++ if (((epnt)->e_flags & EF_UBICOM32_FDPIC) && ! ((epnt)->e_flags & EF_UBICOM32_PIC)) \
++ (piclib) = 2; \
++ else \
++ { \
++ _dl_internal_error_number = LD_ERROR_NOTDYN; \
++ _dl_dprintf(2, "%s: '%s' is not an FDPIC shared library" \
++ "\n", (_dl_progname), (libname)); \
++ _dl_close(infile); \
++ return NULL; \
++ } \
++\
++} \
++while (0)
++
++/* We want want to apply all relocations in the interpreter during
++ bootstrap. Because of this, we have to skip the interpreter
++ relocations in _dl_parse_relocation_information(), see
++ elfinterp.c. */
++#define DL_SKIP_BOOTSTRAP_RELOC(SYMTAB, INDEX, STRTAB) 0
++
++#ifdef __NR_pread64
++#define _DL_PREAD(FD, BUF, SIZE, OFFSET) \
++ (_dl_pread((FD), (BUF), (SIZE), (OFFSET)))
++#endif
++
++/* We want to return to dlsym() a function descriptor if the symbol
++ turns out to be a function. */
++#define DL_FIND_HASH_VALUE(TPNT, TYPE_CLASS, SYM) \
++ (((TYPE_CLASS) & ELF_RTYPE_CLASS_DLSYM) \
++ && ELF32_ST_TYPE((SYM)->st_info) == STT_FUNC \
++ ? _dl_funcdesc_for ((void *)DL_RELOC_ADDR ((TPNT)->loadaddr, (SYM)->st_value), \
++ (TPNT)->loadaddr.got_value) \
++ : DL_RELOC_ADDR ((TPNT)->loadaddr, (SYM)->st_value))
++
++#if 0 /* XXX TODO will look at enabling this if we decide to add support for OCM
++ * code/data */
++
++#define DL_IS_SPECIAL_SEGMENT(EPNT, PPNT) \
++ __dl_is_special_segment(EPNT, PPNT)
++#define DL_MAP_SEGMENT(EPNT, PPNT, INFILE, FLAGS) \
++ __dl_map_segment (EPNT, PPNT, INFILE, FLAGS)
++
++#endif
++
++
++#define DL_GET_READY_TO_RUN_EXTRA_PARMS \
++ , struct elf32_fdpic_loadmap *dl_boot_progmap, Elf32_Addr dl_boot_got_pointer
++#define DL_GET_READY_TO_RUN_EXTRA_ARGS \
++ , dl_boot_progmap, dl_boot_got_pointer
++
++
++#ifdef __USE_GNU
++# include <link.h>
++#else
++# define __USE_GNU
++# include <link.h>
++# undef __USE_GNU
++#endif
++
++#include <elf.h>
++static __inline__ void
++elf_machine_relative (DL_LOADADDR_TYPE load_off, const Elf32_Addr rel_addr,
++ Elf32_Word relative_count)
++{
++#if 0
++ Elf32_Rel * rpnt = (void *) rel_addr;
++ --rpnt;
++ do {
++ Elf32_Addr *const reloc_addr = (void *) (load_off + (++rpnt)->r_offset);
++
++ *reloc_addr = DL_RELOC_ADDR (load_off, *reloc_addr);
++ } while (--relative_count);
++#endif
++}
+--- /dev/null
++++ b/ldso/ldso/ubicom32/elfinterp.c
+@@ -0,0 +1,366 @@
++/* Blackfin ELF shared library loader suppport
++ Copyright (C) 2003, 2004 Red Hat, Inc.
++ Contributed by Alexandre Oliva <aoliva@redhat.com>
++ Lots of code copied from ../i386/elfinterp.c, so:
++ Copyright (c) 1994-2000 Eric Youngdale, Peter MacDonald,
++ David Engel, Hongjiu Lu and Mitch D'Souza
++ Copyright (C) 2001-2002, Erik Andersen
++ All rights reserved.
++
++This file is part of uClibc.
++
++uClibc is free software; you can redistribute it and/or modify it
++under the terms of the GNU Lesser General Public License as
++published by the Free Software Foundation; either version 2.1 of the
++License, or (at your option) any later version.
++
++uClibc is distributed in the hope that it will be useful, but WITHOUT
++ANY WARRANTY; without even the implied warranty of
++MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++Library General Public License for more details.
++
++You should have received a copy of the GNU Lesser General Public
++License along with uClibc; see the file COPYING.LIB. If not, write to
++the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139,
++USA. */
++
++#include <sys/cdefs.h> /* __attribute_used__ */
++
++/* Program to load an ELF binary on a linux system, and run it.
++ References to symbols in sharable libraries can be resolved by either
++ an ELF sharable library or a linux style of shared library. */
++
++/* Disclaimer: I have never seen any AT&T source code for SVr4, nor have
++ I ever taken any courses on internals. This program was developed using
++ information available through the book "UNIX SYSTEM V RELEASE 4,
++ Programmers guide: Ansi C and Programming Support Tools", which did
++ a more than adequate job of explaining everything required to get this
++ working. */
++extern int _dl_ubicom32_resolve_pending(void) __attribute__((__visibility__("hidden")));
++
++struct funcdesc_value volatile *__attribute__((__visibility__("hidden")))
++_dl_linux_resolver (struct elf_resolve *tpnt, int reloc_entry)
++{
++ int reloc_type;
++ ELF_RELOC *this_reloc;
++ char *strtab;
++ ElfW(Sym) *symtab;
++ int symtab_index;
++ char *rel_addr;
++ struct elf_resolve *new_tpnt;
++ char *new_addr;
++ struct funcdesc_value funcval;
++ struct funcdesc_value volatile *got_entry;
++ char *symname;
++
++ rel_addr = (char *)tpnt->dynamic_info[DT_JMPREL];
++
++ this_reloc = (ELF_RELOC *)(intptr_t)(rel_addr + reloc_entry);
++ reloc_type = ELF_R_TYPE(this_reloc->r_info);
++ symtab_index = ELF_R_SYM(this_reloc->r_info);
++
++ symtab = (Elf32_Sym *) tpnt->dynamic_info[DT_SYMTAB];
++ strtab = (char *) tpnt->dynamic_info[DT_STRTAB];
++ symname= strtab + symtab[symtab_index].st_name;
++
++ if (reloc_type != R_UBICOM32_FUNCDESC_VALUE) {
++ _dl_dprintf(2, "%s: Incorrect relocation type in jump relocations\n",
++ _dl_progname);
++ _dl_exit(1);
++ }
++
++ /* Address of GOT entry fix up */
++ got_entry = (struct funcdesc_value *) DL_RELOC_ADDR(tpnt->loadaddr, this_reloc->r_offset);
++
++ /* Get the address to be used to fill in the GOT entry. */
++ new_addr = _dl_lookup_hash(symname, tpnt->symbol_scope, NULL, 0, &new_tpnt);
++ if (!new_addr) {
++ new_addr = _dl_lookup_hash(symname, NULL, NULL, 0, &new_tpnt);
++ if (!new_addr) {
++ _dl_dprintf(2, "%s: can't resolve symbol '%s'\n",
++ _dl_progname, symname);
++ _dl_exit(1);
++ }
++ }
++
++ funcval.entry_point = new_addr;
++ funcval.got_value = new_tpnt->loadaddr.got_value;
++
++#if defined (__SUPPORT_LD_DEBUG__)
++ if (_dl_debug_bindings) {
++ _dl_dprintf(_dl_debug_file, "\nresolve function: %s", symname);
++ if (_dl_debug_detail)
++ _dl_dprintf(_dl_debug_file,
++ "\n\tpatched (%x,%x) ==> (%x,%x) @ %x\n",
++ got_entry->entry_point, got_entry->got_value,
++ funcval.entry_point, funcval.got_value,
++ got_entry);
++ }
++ if (1 || !_dl_debug_nofixups) {
++ got_entry->entry_point = ((unsigned long *)&_dl_ubicom32_resolve_pending)[0];
++ got_entry->got_value = funcval.got_value;
++ got_entry->entry_point = funcval.entry_point;
++ }
++#else
++ /*
++ * initially set the entry point to resolve pending before starting
++ * the update. This has the effect of putting all other requests in a
++ * holding pattern until the resolution is completed.
++ */
++ got_entry->entry_point = ((unsigned long *)&_dl_ubicom32_resolve_pending)[0];
++ got_entry->got_value = funcval.got_value;
++ got_entry->entry_point = funcval.entry_point;
++#endif
++
++ return got_entry;
++}
++
++static int
++_dl_parse(struct elf_resolve *tpnt, struct dyn_elf *scope,
++ unsigned long rel_addr, unsigned long rel_size,
++ int (*reloc_fnc) (struct elf_resolve *tpnt, struct dyn_elf *scope,
++ ELF_RELOC *rpnt, ElfW(Sym) *symtab, char *strtab))
++{
++ unsigned int i;
++ char *strtab;
++ ElfW(Sym) *symtab;
++ ELF_RELOC *rpnt;
++ int symtab_index;
++
++ /* Now parse the relocation information */
++ rpnt = (ELF_RELOC *) rel_addr;
++ rel_size = rel_size / sizeof(ELF_RELOC);
++
++ symtab = (ElfW(Sym) *) tpnt->dynamic_info[DT_SYMTAB];
++ strtab = (char *) tpnt->dynamic_info[DT_STRTAB];
++
++ for (i = 0; i < rel_size; i++, rpnt++) {
++ int res;
++
++ symtab_index = ELF_R_SYM(rpnt->r_info);
++ debug_sym(symtab,strtab,symtab_index);
++ debug_reloc(symtab,strtab,rpnt);
++
++ res = reloc_fnc (tpnt, scope, rpnt, symtab, strtab);
++
++ if (res==0) continue;
++
++ _dl_dprintf(2, "\n%s: ",_dl_progname);
++
++ if (symtab_index)
++ _dl_dprintf(2, "symbol '%s': ", strtab + symtab[symtab_index].st_name);
++
++ if (res <0) {
++ int reloc_type = ELF_R_TYPE(rpnt->r_info);
++#if defined (__SUPPORT_LD_DEBUG__)
++ _dl_dprintf(2, "can't handle reloc type %s\n ", _dl_reltypes(reloc_type));
++#else
++ _dl_dprintf(2, "can't handle reloc type %x\n", reloc_type);
++#endif
++ _dl_exit(-res);
++ } else if (res >0) {
++ _dl_dprintf(2, "can't resolve symbol\n");
++ return res;
++ }
++ }
++ return 0;
++}
++
++static int
++_dl_do_reloc (struct elf_resolve *tpnt,struct dyn_elf *scope,
++ ELF_RELOC *rpnt, ElfW(Sym) *symtab, char *strtab)
++{
++ int reloc_type;
++ int symtab_index;
++ char *symname;
++ unsigned long reloc_value = 0, *reloc_addr;
++ struct { unsigned long v; } __attribute__((__packed__))
++ *reloc_addr_packed;
++ unsigned long symbol_addr;
++ struct elf_resolve *symbol_tpnt;
++ struct funcdesc_value funcval;
++#if defined (__SUPPORT_LD_DEBUG__)
++ unsigned long old_val;
++#endif
++
++ reloc_addr = (unsigned long *) DL_RELOC_ADDR(tpnt->loadaddr, rpnt->r_offset);
++ __asm__ ("" : "=r" (reloc_addr_packed) : "0" (reloc_addr));
++ reloc_type = ELF_R_TYPE(rpnt->r_info);
++ symtab_index = ELF_R_SYM(rpnt->r_info);
++ symbol_addr = 0;
++ symname = strtab + symtab[symtab_index].st_name;
++
++ if (ELF_ST_BIND (symtab[symtab_index].st_info) == STB_LOCAL) {
++ symbol_addr = (unsigned long) DL_RELOC_ADDR(tpnt->loadaddr, symtab[symtab_index].st_value);
++ symbol_tpnt = tpnt;
++ } else {
++
++ symbol_addr = (unsigned long)
++ _dl_lookup_hash(symname, scope, NULL, 0, &symbol_tpnt);
++
++ /*
++ * We want to allow undefined references to weak symbols - this might
++ * have been intentional. We should not be linking local symbols
++ * here, so all bases should be covered.
++ */
++
++ if (!symbol_addr && ELF_ST_BIND(symtab[symtab_index].st_info) != STB_WEAK) {
++ _dl_dprintf (2, "%s: can't resolve symbol '%s'\n",
++ _dl_progname, strtab + symtab[symtab_index].st_name);
++ _dl_exit (1);
++ }
++ }
++
++#if defined (__SUPPORT_LD_DEBUG__)
++ if (_dl_debug_reloc && _dl_debug_detail)
++ {
++ if ((long)reloc_addr_packed & 3)
++ old_val = reloc_addr_packed->v;
++ else
++ old_val = *reloc_addr;
++ }
++ else
++ old_val = 0;
++#endif
++ switch (reloc_type) {
++ case R_UBICOM32_NONE:
++ break;
++ case R_UBICOM32_32:
++ if ((long)reloc_addr_packed & 3)
++ reloc_value = reloc_addr_packed->v += symbol_addr;
++ else
++ reloc_value = *reloc_addr += symbol_addr;
++ break;
++ case R_UBICOM32_FUNCDESC_VALUE:
++ funcval.entry_point = (void*)symbol_addr;
++ /* The addend of FUNCDESC_VALUE
++ relocations referencing global
++ symbols must be ignored, because it
++ may hold the address of a lazy PLT
++ entry. */
++ if (ELF_ST_BIND(symtab[symtab_index].st_info) == STB_LOCAL)
++ funcval.entry_point += *reloc_addr;
++ reloc_value = (unsigned long)funcval.entry_point;
++ if (symbol_addr)
++ funcval.got_value
++ = symbol_tpnt->loadaddr.got_value;
++ else
++ funcval.got_value = 0;
++
++/// XXX this is my best guess as to what I should be doing, but I'm
++/// putting a break-point here so I can inspect the first time this is
++/// used.
++ __asm__ (
++ " move.4 4(%0), 4(%1) \n\t"
++ " move.4 0(%0), 0(%1) \n\t" /* Must to entry_point last */
++ :
++ : "a" (reloc_addr), "a" (&funcval)
++ : "memory" );
++ break;
++ case R_UBICOM32_FUNCDESC:
++ if ((long)reloc_addr_packed & 3)
++ reloc_value = reloc_addr_packed->v;
++ else
++ reloc_value = *reloc_addr;
++ if (symbol_addr)
++ reloc_value = (unsigned long)_dl_funcdesc_for
++ ((char *)symbol_addr + reloc_value,
++ symbol_tpnt->loadaddr.got_value);
++ else
++ reloc_value = 0;
++ if ((long)reloc_addr_packed & 3)
++ reloc_addr_packed->v = reloc_value;
++ else
++ *reloc_addr = reloc_value;
++ break;
++ default:
++ return -1;
++ }
++#if defined (__SUPPORT_LD_DEBUG__)
++ if (_dl_debug_reloc && _dl_debug_detail) {
++ _dl_dprintf(_dl_debug_file, "\tpatched: %x ==> %x @ %x", old_val, reloc_value, reloc_addr);
++ switch (reloc_type) {
++ case R_UBICOM32_FUNCDESC_VALUE:
++ _dl_dprintf(_dl_debug_file, " got %x", ((struct funcdesc_value *)reloc_value)->got_value);
++ break;
++ case R_UBICOM32_FUNCDESC:
++ if (! reloc_value)
++ break;
++ _dl_dprintf(_dl_debug_file, " funcdesc (%x,%x)",
++ ((struct funcdesc_value *)reloc_value)->entry_point,
++ ((struct funcdesc_value *)reloc_value)->got_value);
++ break;
++ }
++ }
++#endif
++
++ return 0;
++}
++
++static int
++_dl_do_lazy_reloc (struct elf_resolve *tpnt,
++ struct dyn_elf *scope __attribute__((unused)),
++ ELF_RELOC *rpnt, ElfW(Sym) *symtab __attribute__((unused)),
++ char *strtab __attribute__((unused)))
++{
++ int reloc_type;
++ struct funcdesc_value volatile *reloc_addr;
++ struct funcdesc_value funcval;
++#if defined (__SUPPORT_LD_DEBUG__)
++ unsigned long old_val;
++#endif
++
++ reloc_addr = (struct funcdesc_value *) DL_RELOC_ADDR(tpnt->loadaddr, rpnt->r_offset);
++ reloc_type = ELF_R_TYPE(rpnt->r_info);
++
++#if defined (__SUPPORT_LD_DEBUG__)
++ old_val = (unsigned long)reloc_addr->entry_point;
++#endif
++ switch (reloc_type) {
++ case R_UBICOM32_NONE:
++ break;
++ case R_UBICOM32_FUNCDESC_VALUE:
++ funcval = *reloc_addr;
++ funcval.entry_point = (void*)DL_RELOC_ADDR(tpnt->loadaddr, funcval.entry_point);
++ funcval.got_value = tpnt->loadaddr.got_value;
++ *reloc_addr = funcval;
++ break;
++ default:
++ return -1;
++ }
++#if defined (__SUPPORT_LD_DEBUG__)
++ if (_dl_debug_reloc && _dl_debug_detail)
++ _dl_dprintf(_dl_debug_file, "\tpatched: %x ==> %x @ %x", old_val, reloc_addr->entry_point, reloc_addr);
++#endif
++ return 0;
++
++}
++
++void
++_dl_parse_lazy_relocation_information
++(struct dyn_elf *rpnt, unsigned long rel_addr, unsigned long rel_size)
++{
++ _dl_parse(rpnt->dyn, NULL, rel_addr, rel_size, _dl_do_lazy_reloc);
++}
++
++int
++_dl_parse_relocation_information
++(struct dyn_elf *rpnt, unsigned long rel_addr, unsigned long rel_size)
++{
++ return _dl_parse(rpnt->dyn, rpnt->dyn->symbol_scope, rel_addr, rel_size, _dl_do_reloc);
++}
++
++#if 0
++/* We don't have copy relocs. */
++int
++_dl_parse_copy_information
++(struct dyn_elf *rpnt __attribute__((unused)),
++ unsigned long rel_addr __attribute__((unused)),
++ unsigned long rel_size __attribute__((unused)))
++{
++ return 0;
++}
++#endif
++#ifndef IS_IN_libdl
++# include "../../libc/sysdeps/linux/ubicom32/crtreloc.c"
++#endif
+--- /dev/null
++++ b/ldso/ldso/ubicom32/resolve.S
+@@ -0,0 +1,161 @@
++ /* Copyright (C) 2003 Red Hat, Inc.
++ Contributed by Alexandre Oliva <aoliva@redhat.com>
++
++ Copyright (C) 2009 Ubicom Inc.
++ Ported to Ubicom32 by Ubicom Inc.
++
++This file is part of uClibc.
++
++uClibc is free software; you can redistribute it and/or modify it
++under the terms of the GNU Lesser General Public License as
++published by the Free Software Foundation; either version 2.1 of the
++License, or (at your option) any later version.
++
++uClibc is distributed in the hope that it will be useful, but WITHOUT
++ANY WARRANTY; without even the implied warranty of
++MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++Library General Public License for more details.
++
++You should have received a copy of the GNU Lesser General Public
++License along with uClibc; see the file COPYING.LIB. If not, write to
++the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139,
++USA. */
++
++
++/*
++ * The function below is tail-called by resolver stubs when a lazily-bound *
++ * function is called. It must preserve all registers that could * be used to
++ * pass arguments to the actual function.
++ *
++ * On entry to the function d0-d13 contain parameters to the actual function of
++ * interest
++ *
++ * a5 contains the return address
++ * a0 is pointing to the GOT table for the original function
++ * (a0) _dl_linux_resolve
++ * 4(a0) GOT for _dl_linux_resolve
++ * 8(a0) is pointer to "structure elf_resolve" of the module where the call
++ * originated from
++ *
++ * a3 is pointing to the function descriptor in the GOT table, and 8(a3) the
++ * resolver lookup information.
++ *
++ * _dl_linux_resolve calls _dl_linux_resolver passing it pointer to
++ * struct elf_resolve and the relocation entry.
++ *
++ * _dl_linux_resolver() figures out where the jump symbol is _really_ supposed
++ * to have jumped to and returns that to us. Once we have that, we prepare to
++ * tail-call the actual function, clean up after ourselves, restoring the
++ * original arguments, then jump to the fixed up address.
++ */
++
++#if 0
++ /*
++ * Here is what the linker will use for the PLT.
++ */
++sample_PLT_functionX: /* (at entry a0 contains GOT for this library) */
++ movei d15, # -%lo(got_funcdescX) ; load offset for GOT
++ lea.4 a3, (a0, d15) ; a4 is now the function descriptor
++ move.4 a4, 0(a3) ; get entry_point
++ move.4 a0, 4(a3) ; set new GOT
++
++ /*
++ * jump to resovled function OR PLT_trampoline Nat had some code here
++ * that uses the stack instead of a3 to reduces hazards.
++ */
++ calli a4, 0(a4)
++
++
++sample_PLT_trampoline:
++ /*
++ * find the old got by undoing what was done above. An alternative
++ * could have been to ‘save’ the old got in say d14 but that would add 1
++ * instruction to every PLT and there is only 1 PLT trampoline per library.
++ */
++ ret (a0) ; jump to _dl_linux_resolve
++#endif
++
++ .text
++ .p2align 4
++
++ .hidden _dl_linux_resolve
++ .global _dl_linux_resolve
++ .type _dl_linux_resolve,@function
++_dl_linux_resolve:
++ /* Preserve arguments and return address */
++ move.4 -4(sp)++, d0
++ move.4 -4(sp)++, d1
++ move.4 -4(sp)++, d2
++ move.4 -4(sp)++, d3
++ move.4 -4(sp)++, d4
++ move.4 -4(sp)++, d5
++ move.4 -4(sp)++, d6
++ move.4 -4(sp)++, d7
++ move.4 -4(sp)++, d8
++ move.4 -4(sp)++, d9
++ move.4 -4(sp)++, d10
++ move.4 -4(sp)++, d11
++ move.4 -4(sp)++, d12
++ move.4 -4(sp)++, d13
++ move.4 -4(sp)++, a5
++
++ /* Prepare to call _dl_linux_resolver. */
++ move.4 d0, 8(a0) ; reference to elf_resolve
++ /* Not aligned for space reasons. */
++ move.4 d1, mac_hi ; reference to GOT table entry which
++ ; contains the relocation information.
++
++ move.4 a0, 4(a0) ; switch to GOT for _dl_linux_resolve
++ call a5, _dl_linux_resolver;
++
++ /* Move aside return value that contains the FUNCDESC_VALUE. */
++ ;P3 = R0;
++ move.4 a3, d0;
++
++ /* Restore arguments. */
++ move.4 a5, (sp)4++
++ move.4 d13, (sp)4++
++ move.4 d12, (sp)4++
++ move.4 d11, (sp)4++
++ move.4 d10, (sp)4++
++ move.4 d9, (sp)4++
++ move.4 d8, (sp)4++
++ move.4 d7, (sp)4++
++ move.4 d6, (sp)4++
++ move.4 d5, (sp)4++
++ move.4 d4, (sp)4++
++ move.4 d3, (sp)4++
++ move.4 d2, (sp)4++
++ move.4 d1, (sp)4++
++ move.4 d0, (sp)4++
++
++ /* Now jump to the actual function. */
++ /* a3 contains func_desc resolution */
++ move.4 a4, 0(a3) ; address of function X
++ move.4 a0, 4(a3) ; switch to GOT for function X
++ calli a4, 0(a4) ; call through a4, a5 remains
++
++ .size _dl_linux_resolve, . - _dl_linux_resolve
++
++ .hidden _dl_ubicom32_resolve_pending
++ .global _dl_ubicom32_resolve_pending
++ .type _dl_ubicom32_resolve_pending,@function
++
++_dl_ubicom32_resolve_pending:
++ /*
++ * A special function that is used to ensure thread saftly when the fd
++ * for a particular resolution is being updated.
++ *
++ * At entry, a3 must point to the FD. While the FD is being updated the
++ * entry_point will continue to point to _dl_ubicom32_resolve_pending so
++ * we will effectively spin until the resolver update is complete.
++ */
++
++ move.4 a4, 0(a3) ; get entry_point
++ move.4 a0, 4(a3) ; set new GOT
++
++ /*
++ * jump to resovled function or back to _dl_ubicom32_resolve_pending.
++ */
++ calli a4, 0(a4)
++ .size _dl_ubicom32_resolve_pending, . - _dl_ubicom32_resolve_pending
+--- a/libc/misc/Makefile.in
++++ b/libc/misc/Makefile.in
+@@ -12,7 +12,9 @@ include $(top_srcdir)libc/misc/assert/Ma
+ include $(top_srcdir)libc/misc/ctype/Makefile.in
+ include $(top_srcdir)libc/misc/dirent/Makefile.in
+ include $(top_srcdir)libc/misc/error/Makefile.in
++ifneq ($(ARCH_HAS_NO_LDSO),y)
+ include $(top_srcdir)libc/misc/elf/Makefile.in
++endif
+ include $(top_srcdir)libc/misc/file/Makefile.in
+ include $(top_srcdir)libc/misc/fnmatch/Makefile.in
+ include $(top_srcdir)libc/misc/ftw/Makefile.in
+--- a/libc/misc/elf/dl-iterate-phdr.c
++++ b/libc/misc/elf/dl-iterate-phdr.c
+@@ -14,7 +14,7 @@
+
+ #include <link.h>
+ #include <ldso.h>
+-
++#include <memory.h>
+ /* we want this in libc but nowhere else */
+ #ifdef __USE_GNU
+
+--- a/libc/stdlib/malloc/malloc.c
++++ b/libc/stdlib/malloc/malloc.c
+@@ -23,7 +23,7 @@
+
+ /* The malloc heap. We provide a bit of initial static space so that
+ programs can do a little mallocing without mmaping in more space. */
+-HEAP_DECLARE_STATIC_FREE_AREA (initial_fa, 256);
++HEAP_DECLARE_STATIC_FREE_AREA (initial_fa, 32768);
+ struct heap_free_area *__malloc_heap = HEAP_INIT_WITH_FA (initial_fa);
+ #ifdef HEAP_USE_LOCKING
+ malloc_mutex_t __malloc_heap_lock = PTHREAD_MUTEX_INITIALIZER;
+--- /dev/null
++++ b/libc/string/ubicom32/Makefile
+@@ -0,0 +1,13 @@
++# Makefile for uClibc
++#
++# Copyright (C) 2000-2005 Erik Andersen <andersen@uclibc.org>
++#
++# Licensed under the LGPL v2.1, see the file COPYING.LIB in this tarball.
++#
++
++top_srcdir:=../../../
++top_builddir:=../../../
++all: objs
++include $(top_builddir)Rules.mak
++include ../Makefile.in
++include $(top_srcdir)Makerules
+--- /dev/null
++++ b/libc/string/ubicom32/memcpy.c
+@@ -0,0 +1,152 @@
++/* Copy memory to memory until the specified number of bytes
++ has been copied. Overlap is NOT handled correctly.
++ Copyright (C) 1991, 1997, 2003 Free Software Foundation, Inc.
++ This file is part of the GNU C Library.
++ Contributed by Torbjorn Granlund (tege@sics.se).
++
++ The GNU C Library is free software; you can redistribute it and/or
++ modify it under the terms of the GNU Lesser General Public
++ License as published by the Free Software Foundation; either
++ version 2.1 of the License, or (at your option) any later version.
++
++ The GNU C Library is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ Lesser General Public License for more details.
++
++ You should have received a copy of the GNU Lesser General Public
++ License along with the GNU C Library; if not, write to the Free
++ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
++ 02111-1307 USA. */
++
++#include <string.h>
++
++typedef unsigned long addr_t;
++
++libc_hidden_proto(memcpy)
++
++void *memcpy (void *dest, const void *src, size_t n)
++{
++ void *dest_ret = dest;
++ void *aligned_start;
++
++ if (likely((((addr_t)dest ^ (addr_t)src) & 3) == 0) && likely(n > 6)) {
++ size_t m;
++ n -= (4 - (addr_t)dest) & 0x03;
++ m = n >> 2;
++ __asm__ volatile (
++ " call %4, 99f \n\t" // load %4 with address of 99
++ "99: movei d15, #%%lo(1f-99b) \n\t" // load d15 with offset to 1 from 99
++ " add.4 %4, %4, d15 \n\t" // add difference
++
++ " sub.4 d15, #0, %2 \n\t" // set up for jump table
++ " and.4 d15, #(32-1), d15 \n\t" // d15 = (-m) & (32 - 1)
++ " lea.4 %4, (%4,d15) \n\t"
++
++ " bfextu d15, %0, #2 \n\t" // d15 = (dest & 3)
++ " jmpne.w.f 100f \n\t"
++ " calli %4, 0(%4) \n\t" // 4-byte alignment
++
++ "100: cmpi d15, #2 \n\t"
++ " jmpne.s.f 101f \n\t"
++ " move.2 (%0)2++, (%1)2++ \n\t"
++ " calli %4, 0(%4) \n\t" // 2-byte alignment
++
++ "101: move.1 (%0)1++, (%1)1++ \n\t"
++ " jmpgt.s.f 102f \n\t" // 3-byte alignment
++ " move.2 (%0)2++, (%1)2++ \n\t" // 1-byte alignment
++ "102: calli %4, 0(%4) \n\t"
++
++ "200: cmpi %3, #2 \n\t"
++ " jmplt.s.f 201f \n\t"
++ " move.2 (%0)2++, (%1)2++ \n\t"
++ " jmpeq.s.t 2f \n\t"
++ "201: move.1 (%0)1++, (%1)1++ \n\t"
++ " jmpt.w.t 2f \n\t"
++
++ "1: .rept 25 \n\t"
++ " movea (%0)4++, (%1)4++ \n\t"
++ " .endr \n\t"
++ " .rept 7 \n\t"
++ " move.4 (%0)4++, (%1)4++ \n\t"
++ " .endr \n\t"
++ " add.4 %2, #-32, %2 \n\t"
++ " jmpgt.w.f 1b \n\t"
++
++ " and.4 %3, #3, %3 \n\t" // check n
++ " jmpne.w.f 200b \n\t"
++ "2: \n\t"
++ : "+a"(dest), "+a"(src), "+d"(m), "+d"(n), "=a"(aligned_start)
++ :
++ : "d15", "memory", "cc"
++ );
++
++ return dest_ret;
++ }
++
++ if (likely((((addr_t)dest ^ (addr_t)src) & 1) == 0) && likely(n > 2)) {
++ size_t m;
++ n -= (addr_t)dest & 0x01;
++ m = n >> 1;
++ __asm__ volatile (
++ " call %4, 99f \n\t" // load %4 with address of 99
++ "99: movei d15, #%%lo(1f-99b) \n\t" // load d15 with offset to 1 from 99
++ " add.4 %4, %4, d15 \n\t" // add difference
++
++ " sub.4 d15, #0, %2 \n\t" // set up for jump table
++ " and.4 d15, #(32-1), d15 \n\t" // d15 = (-m) & (32 - 1)
++ " lea.4 %4, (%4,d15) \n\t"
++
++ " btst %0, #0 \n\t" // check bit 0
++ " jmpne.w.f 100f \n\t"
++ " calli %4, 0(%4) \n\t" // 4-byte alignment
++
++ "100: move.1 (%0)1++, (%1)1++ \n\t"
++ " calli %4, 0(%4) \n\t"
++
++ "200: move.1 (%0)1++, (%1)1++ \n\t"
++ " jmpt.w.t 2f \n\t"
++
++ "1: .rept 32 \n\t"
++ " move.2 (%0)2++, (%1)2++ \n\t"
++ " .endr \n\t"
++ " add.4 %2, #-32, %2 \n\t"
++ " jmpgt.w.f 1b \n\t"
++
++ " and.4 %3, #1, %3 \n\t" // check n
++ " jmpne.w.f 200b \n\t"
++ "2: \n\t"
++
++ : "+a"(dest), "+a"(src), "+d"(m), "+d"(n), "=a"(aligned_start)
++ :
++ : "d15", "memory", "cc"
++ );
++ return dest_ret;
++ }
++
++ __asm__ volatile (
++ " call %3, 99f \n\t" // load %3 with address of 99
++ "99: movei d15, #%%lo(1f-99b) \n\t" // load d15 with offset to 1 from 99
++ " add.4 %3, %3, d15 \n\t" // add difference
++
++ " sub.4 d15, #0, %2 \n\t"
++ " jmpeq.w.f 2f \n\t"
++ " and.4 d15, #(16-1), d15 \n\t" // d15 = (-n) & (16 - 1)
++ " lea.4 %3, (%3,d15) \n\t"
++ " calli %3, 0(%3) \n\t"
++
++ "1: .rept 16 \n\t"
++ " move.1 (%0)1++, (%1)1++ \n\t"
++ " .endr \n\t"
++ " add.4 %2, #-16, %2 \n\t"
++ " jmpgt.w.f 1b \n\t"
++ "2: \n\t"
++
++ : "+a"(dest), "+a"(src), "+d"(n), "=a"(aligned_start)
++ :
++ : "d15", "memory", "cc"
++ );
++
++ return dest_ret;
++}
++libc_hidden_def(memcpy)
+--- /dev/null
++++ b/libc/string/ubicom32/memset.c
+@@ -0,0 +1,107 @@
++/* Copyright (C) 1991, 1997, 2003 Free Software Foundation, Inc.
++ This file is part of the GNU C Library.
++
++ The GNU C Library is free software; you can redistribute it and/or
++ modify it under the terms of the GNU Lesser General Public
++ License as published by the Free Software Foundation; either
++ version 2.1 of the License, or (at your option) any later version.
++
++ The GNU C Library is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ Lesser General Public License for more details.
++
++ You should have received a copy of the GNU Lesser General Public
++ License along with the GNU C Library; if not, write to the Free
++ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
++ 02111-1307 USA. */
++
++#include <string.h>
++
++typedef unsigned long addr_t;
++
++libc_hidden_proto(memset)
++void *memset (void *s, int c, size_t n)
++{
++ void *s_ret = s;
++ void *aligned_start;
++ if (likely(n > 6)) {
++ size_t m;
++ n -= (4 - (addr_t)s) & 0x03;
++ m = n >> 2;
++ __asm__ volatile (
++ " call %4, 99f \n\t" // load %4 with address of 99
++ "99: movei d15, #%%lo(1f-99b) \n\t" // load d15 with offset to 1 from 99
++ " add.4 %4, %4, d15 \n\t" // add difference
++
++ " sub.4 d15, #0, %2 \n\t" // set up for jump table
++ " and.4 d15, #(32-1), d15 \n\t" // d15 = (-m) & (32 - 1)
++ " shmrg.1 %1, %1, %1 \n\t"
++ " shmrg.2 %1, %1, %1 \n\t" // %1 = (c<<24)|(c<<16)|(c<<8)|c
++ " lea.4 %4, (%4,d15) \n\t"
++
++ " bfextu d15, %0, #2 \n\t" // d15 = (s & 3)
++ " jmpne.w.f 100f \n\t"
++ " calli %4, 0(%4) \n\t" // 4-byte alignment
++
++ "100: cmpi d15, #2 \n\t"
++ " jmpne.s.f 101f \n\t"
++ " move.2 (%0)2++, %1 \n\t"
++ " calli %4, 0(%4) \n\t" // 2-byte alignment
++
++ "101: move.1 (%0)1++, %1 \n\t"
++ " jmpgt.s.f 102f \n\t" // 3-byte alignment
++ " move.2 (%0)2++, %1 \n\t" // 1-byte alignment
++ "102: calli %4, 0(%4) \n\t"
++
++ "200: cmpi %3, #2 \n\t"
++ " jmplt.s.f 201f \n\t"
++ " move.2 (%0)2++, %1 \n\t"
++ " jmpeq.s.t 2f \n\t"
++ "201: move.1 (%0)1++, %1 \n\t"
++ " jmpt.w.t 2f \n\t"
++
++ "1: .rept 25 \n\t"
++ " movea (%0)4++, %1 \n\t"
++ " .endr \n\t"
++ " .rept 7 \n\t"
++ " move.4 (%0)4++, %1 \n\t"
++ " .endr \n\t"
++ " add.4 %2, #-32, %2 \n\t"
++ " jmpgt.w.f 1b \n\t"
++
++ " and.4 %3, #3, %3 \n\t" // test bit 1 of n
++ " jmpne.w.f 200b \n\t"
++ "2: \n\t"
++ : "+a"(s), "+d"(c), "+d"(m), "+d"(n), "=a"(aligned_start)
++ :
++ : "d15", "memory", "cc"
++ );
++
++ return s_ret;
++ }
++
++ __asm__ volatile (
++ " call %3, 99f \n\t" // load %3 with address of 99
++ "99: movei d15, #%%lo(1f-99b) \n\t" // load d15 with offset to 1 from 99
++ " add.4 %3, %3, d15 \n\t" // add difference
++
++ " sub.4 d15, #0, %2 \n\t"
++ " jmpeq.w.f 2f \n\t"
++ " and.4 d15, #(8-1), d15 \n\t" // d15 = (-%2) & (16 - 1)
++ " lea.4 %3, (%3,d15) \n\t"
++ " calli %3, 0(%3) \n\t"
++
++ "1: .rept 8 \n\t"
++ " move.1 (%0)1++, %1 \n\t"
++ " .endr \n\t"
++ "2: \n\t"
++
++ : "+a"(s), "+d"(c), "+d"(n), "=a"(aligned_start)
++ :
++ : "d15", "memory", "cc"
++ );
++
++ return s_ret;
++}
++libc_hidden_def(memset)
+--- /dev/null
++++ b/libc/sysdeps/linux/ubicom32/Makefile
+@@ -0,0 +1,13 @@
++# Makefile for uClibc
++#
++# Copyright (C) 2000-2006 Erik Andersen <andersen@uclibc.org>
++#
++# Licensed under the LGPL v2.1, see the file COPYING.LIB in this tarball.
++#
++
++top_srcdir=../../../../
++top_builddir=../../../../
++all: objs
++include $(top_builddir)Rules.mak
++include Makefile.arch
++include $(top_srcdir)Makerules
+--- /dev/null
++++ b/libc/sysdeps/linux/ubicom32/Makefile.arch
+@@ -0,0 +1,28 @@
++# Makefile for uClibc
++#
++# Copyright (C) 2000-2006 Erik Andersen <andersen@uclibc.org>
++#
++# Licensed under the LGPL v2.1, see the file COPYING.LIB in this tarball.
++#
++
++#CSRC := \
++# brk.c \
++# crtbegin.c \
++# crtend.c
++#
++#SSRC := \
++# __longjmp.S \
++# bsd-_setjmp.S \
++# bsd-setjmp.S \
++# setjmp.S \
++# clone.S \
++# vfork.S
++
++CSRC := \
++ syscall.c __syscall_error.c
++
++SSRC := \
++ clone.S setjmp.S vfork.S
++
++ARCH_CFLAGS := $(CPU_CFLAGS-y)
++include $(top_srcdir)libc/sysdeps/linux/Makefile.commonarch
+--- /dev/null
++++ b/libc/sysdeps/linux/ubicom32/__syscall_error.c
+@@ -0,0 +1,11 @@
++#include <errno.h>
++#include <features.h>
++
++/* This routine is jumped to by some of the syscall handlers, to stash
++ * an error number into errno. */
++int __syscall_error(int err_no) attribute_hidden;
++int __syscall_error(int err_no)
++{
++ __set_errno(err_no);
++ return -1;
++}
+--- /dev/null
++++ b/libc/sysdeps/linux/ubicom32/bits/elf-fdpic.h
+@@ -0,0 +1,115 @@
++/* Copyright 2003, 2004 Free Software Foundation, Inc.
++This file is part of the GNU C Library.
++
++The GNU C Library is free software; you can redistribute it and/or
++modify it under the terms of the GNU Lesser General Public License as
++published by the Free Software Foundation; either version 2.1 of the
++License, or (at your option) any later version.
++
++In addition to the permissions in the GNU Lesser General Public
++License, the Free Software Foundation gives you unlimited
++permission to link the compiled version of this file with other
++programs, and to distribute those programs without any restriction
++coming from the use of this file. (The GNU Lesser General Public
++License restrictions do apply in other respects; for example, they
++cover modification of the file, and distribution when not linked
++into another program.)
++
++The GNU C Library is distributed in the hope that it will be useful,
++but WITHOUT ANY WARRANTY; without even the implied warranty of
++MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++Library General Public License for more details.
++
++You should have received a copy of the GNU Lesser General Public
++License along with the GNU C Library; see the file COPYING.LIB. If
++not, write to the Free Software Foundation, Inc., 675 Mass Ave,
++Cambridge, MA 02139, USA. */
++
++#ifndef _BITS_ELF_FDPIC_H
++#define _BITS_ELF_FDPIC_H
++
++/* These data structures are described in the FDPIC ABI extension.
++ The kernel passes a process a memory map, such that for every LOAD
++ segment there is an elf32_fdpic_loadseg entry. A pointer to an
++ elf32_fdpic_loadmap is passed in d8 at start-up, and a pointer to
++ an additional such map is passed in d9 for the interpreter, when
++ there is one. */
++
++#include <elf.h>
++
++/* This data structure represents a PT_LOAD segment. */
++struct elf32_fdpic_loadseg
++{
++ /* Core address to which the segment is mapped. */
++ Elf32_Addr addr;
++ /* VMA recorded in the program header. */
++ Elf32_Addr p_vaddr;
++ /* Size of this segment in memory. */
++ Elf32_Word p_memsz;
++};
++
++struct elf32_fdpic_loadmap {
++ /* Protocol version number, must be zero. */
++ Elf32_Half version;
++ /* Number of segments in this map. */
++ Elf32_Half nsegs;
++ /* The actual memory map. */
++ struct elf32_fdpic_loadseg segs[/*nsegs*/];
++};
++
++struct elf32_fdpic_loadaddr {
++ struct elf32_fdpic_loadmap *map;
++ void *got_value;
++};
++
++/* Map a pointer's VMA to its corresponding address according to the
++ load map. */
++static __always_inline void *
++__reloc_pointer (void *p,
++ const struct elf32_fdpic_loadmap *map)
++{
++ int c;
++
++#if 0
++ if (map->version != 0)
++ /* Crash. */
++ ((void(*)())0)();
++#endif
++
++ /* No special provision is made for NULL. We don't want NULL
++ addresses to go through relocation, so they shouldn't be in
++ .rofixup sections, and, if they're present in dynamic
++ relocations, they shall be mapped to the NULL address without
++ undergoing relocations. */
++
++ for (c = 0;
++ /* Take advantage of the fact that the loadmap is ordered by
++ virtual addresses. In general there will only be 2 entries,
++ so it's not profitable to do a binary search. */
++ c < map->nsegs && p >= (void*)map->segs[c].p_vaddr;
++ c++)
++ {
++ /* This should be computed as part of the pointer comparison
++ above, but we want to use the carry in the comparison, so we
++ can't convert it to an integer type beforehand. */
++ unsigned long offset = p - (void*)map->segs[c].p_vaddr;
++ /* We only check for one-past-the-end for the last segment,
++ assumed to be the data segment, because other cases are
++ ambiguous in the absence of padding between segments, and
++ rofixup already serves as padding between text and data.
++ Unfortunately, unless we special-case the last segment, we
++ fail to relocate the _end symbol. */
++ if (offset < map->segs[c].p_memsz
++ || (offset == map->segs[c].p_memsz && c + 1 == map->nsegs))
++ return (char*)map->segs[c].addr + offset;
++ }
++
++ /* We might want to crash instead. */
++ return (void*)-1;
++}
++
++# define __RELOC_POINTER(ptr, loadaddr) \
++ (__reloc_pointer ((void*)(ptr), \
++ (loadaddr).map))
++
++#endif /* _BITS_ELF_FDPIC_H */
+--- /dev/null
++++ b/libc/sysdeps/linux/ubicom32/bits/endian.h
+@@ -0,0 +1,7 @@
++/* Ubicom32 is big-endian. */
++
++#ifndef _ENDIAN_H
++# error "Never use <bits/endian.h> directly; include <endian.h> instead."
++#endif
++
++#define __BYTE_ORDER __BIG_ENDIAN
+--- /dev/null
++++ b/libc/sysdeps/linux/ubicom32/bits/fcntl.h
+@@ -0,0 +1,226 @@
++/* O_*, F_*, FD_* bit values for Linux.
++ Copyright (C) 2000 Free Software Foundation, Inc.
++ This file is part of the GNU C Library.
++
++ The GNU C Library is free software; you can redistribute it and/or
++ modify it under the terms of the GNU Lesser General Public
++ License as published by the Free Software Foundation; either
++ version 2.1 of the License, or (at your option) any later version.
++
++ The GNU C Library is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ Lesser General Public License for more details.
++
++ You should have received a copy of the GNU Lesser General Public
++ License along with the GNU C Library; if not, write to the Free
++ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
++ 02111-1307 USA. */
++
++#ifndef _FCNTL_H
++# error "Never use <bits/fcntl.h> directly; include <fcntl.h> instead."
++#endif
++
++
++#include <sys/types.h>
++#ifdef __USE_GNU
++# include <bits/uio.h>
++#endif
++
++/* open/fcntl - O_SYNC is only implemented on blocks devices and on files
++ located on an ext2 file system */
++#define O_ACCMODE 0003
++#define O_RDONLY 00
++#define O_WRONLY 01
++#define O_RDWR 02
++#define O_CREAT 0100 /* not fcntl */
++#define O_EXCL 0200 /* not fcntl */
++#define O_NOCTTY 0400 /* not fcntl */
++#define O_TRUNC 01000 /* not fcntl */
++#define O_APPEND 02000
++#define O_NONBLOCK 04000
++#define O_NDELAY O_NONBLOCK
++#define O_SYNC 010000
++#define O_FSYNC O_SYNC
++#define O_ASYNC 020000
++
++#ifdef __USE_GNU
++# define O_DIRECTORY 040000 /* Must be a directory. */
++# define O_NOFOLLOW 0100000 /* Do not follow links. */
++# define O_DIRECT 0200000 /* Direct disk access. */
++# define O_NOATIME 01000000 /* Do not set atime. */
++# define O_CLOEXEC 02000000 /* set close_on_exec */
++# define O_STREAMING 04000000 /* streaming access */
++#endif
++
++/* For now Linux has synchronisity options for data and read operations.
++ We define the symbols here but let them do the same as O_SYNC since
++ this is a superset. */
++#if defined __USE_POSIX199309 || defined __USE_UNIX98
++# define O_DSYNC O_SYNC /* Synchronize data. */
++# define O_RSYNC O_SYNC /* Synchronize read operations. */
++#endif
++
++#ifdef __USE_LARGEFILE64
++# define O_LARGEFILE 0400000
++#endif
++
++/* Values for the second argument to `fcntl'. */
++#define F_DUPFD 0 /* Duplicate file descriptor. */
++#define F_GETFD 1 /* Get file descriptor flags. */
++#define F_SETFD 2 /* Set file descriptor flags. */
++#define F_GETFL 3 /* Get file status flags. */
++#define F_SETFL 4 /* Set file status flags. */
++#ifndef __USE_FILE_OFFSET64
++# define F_GETLK 5 /* Get record locking info. */
++# define F_SETLK 6 /* Set record locking info (non-blocking). */
++# define F_SETLKW 7 /* Set record locking info (blocking). */
++#else
++# define F_GETLK F_GETLK64 /* Get record locking info. */
++# define F_SETLK F_SETLK64 /* Set record locking info (non-blocking).*/
++# define F_SETLKW F_SETLKW64 /* Set record locking info (blocking). */
++#endif
++#define F_GETLK64 12 /* Get record locking info. */
++#define F_SETLK64 13 /* Set record locking info (non-blocking). */
++#define F_SETLKW64 14 /* Set record locking info (blocking). */
++
++#if defined __USE_BSD || defined __USE_XOPEN2K
++# define F_SETOWN 8 /* Get owner of socket (receiver of SIGIO). */
++# define F_GETOWN 9 /* Set owner of socket (receiver of SIGIO). */
++#endif
++
++#ifdef __USE_GNU
++# define F_SETSIG 10 /* Set number of signal to be sent. */
++# define F_GETSIG 11 /* Get number of signal to be sent. */
++#endif
++
++#ifdef __USE_GNU
++# define F_SETLEASE 1024 /* Set a lease. */
++# define F_GETLEASE 1025 /* Enquire what lease is active. */
++# define F_NOTIFY 1026 /* Request notfications on a directory. */
++#endif
++
++/* For F_[GET|SET]FL. */
++#define FD_CLOEXEC 1 /* actually anything with low bit set goes */
++
++/* For posix fcntl() and `l_type' field of a `struct flock' for lockf(). */
++#define F_RDLCK 0 /* Read lock. */
++#define F_WRLCK 1 /* Write lock. */
++#define F_UNLCK 2 /* Remove lock. */
++
++/* For old implementation of bsd flock(). */
++#define F_EXLCK 4 /* or 3 */
++#define F_SHLCK 8 /* or 4 */
++
++#ifdef __USE_BSD
++/* Operations for bsd flock(), also used by the kernel implementation. */
++# define LOCK_SH 1 /* shared lock */
++# define LOCK_EX 2 /* exclusive lock */
++# define LOCK_NB 4 /* or'd with one of the above to prevent
++ blocking */
++# define LOCK_UN 8 /* remove lock */
++#endif
++
++#ifdef __USE_GNU
++# define LOCK_MAND 32 /* This is a mandatory flock: */
++# define LOCK_READ 64 /* ... which allows concurrent read operations. */
++# define LOCK_WRITE 128 /* ... which allows concurrent write operations. */
++# define LOCK_RW 192 /* ... Which allows concurrent read & write operations. */
++#endif
++
++#ifdef __USE_GNU
++/* Types of directory notifications that may be requested with F_NOTIFY. */
++# define DN_ACCESS 0x00000001 /* File accessed. */
++# define DN_MODIFY 0x00000002 /* File modified. */
++# define DN_CREATE 0x00000004 /* File created. */
++# define DN_DELETE 0x00000008 /* File removed. */
++# define DN_RENAME 0x00000010 /* File renamed. */
++# define DN_ATTRIB 0x00000020 /* File changed attibutes. */
++# define DN_MULTISHOT 0x80000000 /* Don't remove notifier. */
++#endif
++
++struct flock
++ {
++ short int l_type; /* Type of lock: F_RDLCK, F_WRLCK, or F_UNLCK. */
++ short int l_whence; /* Where `l_start' is relative to (like `lseek'). */
++#ifndef __USE_FILE_OFFSET64
++ __off_t l_start; /* Offset where the lock begins. */
++ __off_t l_len; /* Size of the locked area; zero means until EOF. */
++#else
++ __off64_t l_start; /* Offset where the lock begins. */
++ __off64_t l_len; /* Size of the locked area; zero means until EOF. */
++#endif
++ __pid_t l_pid; /* Process holding the lock. */
++ };
++
++#ifdef __USE_LARGEFILE64
++struct flock64
++ {
++ short int l_type; /* Type of lock: F_RDLCK, F_WRLCK, or F_UNLCK. */
++ short int l_whence; /* Where `l_start' is relative to (like `lseek'). */
++ __off64_t l_start; /* Offset where the lock begins. */
++ __off64_t l_len; /* Size of the locked area; zero means until EOF. */
++ __pid_t l_pid; /* Process holding the lock. */
++ };
++#endif
++
++/* Define some more compatibility macros to be backward compatible with
++ BSD systems which did not managed to hide these kernel macros. */
++#ifdef __USE_BSD
++# define FAPPEND O_APPEND
++# define FFSYNC O_FSYNC
++# define FASYNC O_ASYNC
++# define FNONBLOCK O_NONBLOCK
++# define FNDELAY O_NDELAY
++#endif /* Use BSD. */
++
++/* Advise to `posix_fadvise'. */
++#ifdef __USE_XOPEN2K
++# define POSIX_FADV_NORMAL 0 /* No further special treatment. */
++# define POSIX_FADV_RANDOM 1 /* Expect random page references. */
++# define POSIX_FADV_SEQUENTIAL 2 /* Expect sequential page references. */
++# define POSIX_FADV_WILLNEED 3 /* Will need these pages. */
++# define POSIX_FADV_DONTNEED 4 /* Don't need these pages. */
++# define POSIX_FADV_NOREUSE 5 /* Data will be accessed once. */
++#endif
++
++#ifdef __USE_GNU
++# define SYNC_FILE_RANGE_WAIT_BEFORE 1 /* Wait upon writeout of all pages
++ in the range before performing the
++ write. */
++# define SYNC_FILE_RANGE_WRITE 2 /* Initiate writeout of all those
++ dirty pages in the range which are
++ not presently under writeback. */
++# define SYNC_FILE_RANGE_WAIT_AFTER 4 /* Wait upon writeout of all pages in
++ the range after performing the
++ write. */
++#endif
++
++__BEGIN_DECLS
++
++#ifdef __USE_GNU
++
++/* Provide kernel hint to read ahead. */
++extern ssize_t readahead (int __fd, __off64_t __offset, size_t __count)
++ __THROW;
++
++/* Selective file content synch'ing. */
++extern int sync_file_range (int __fd, __off64_t __from, __off64_t __to,
++ unsigned int __flags);
++
++/* Splice address range into a pipe. */
++extern ssize_t vmsplice (int __fdout, const struct iovec *__iov,
++ size_t __count, unsigned int __flags);
++
++/* Splice two files together. */
++extern ssize_t splice (int __fdin, __off64_t *__offin, int __fdout,
++ __off64_t *__offout, size_t __len,
++ unsigned int __flags);
++
++/* In-kernel implementation of tee for pipe buffers. */
++extern ssize_t tee (int __fdin, int __fdout, size_t __len,
++ unsigned int __flags);
++
++#endif
++
++__END_DECLS
+--- /dev/null
++++ b/libc/sysdeps/linux/ubicom32/bits/kernel_stat.h
+@@ -0,0 +1,55 @@
++#ifndef _BITS_STAT_STRUCT_H
++#define _BITS_STAT_STRUCT_H
++
++#ifndef _LIBC
++#error bits/kernel_stat.h is for internal uClibc use only!
++#endif
++
++/* This file provides whatever this particular arch's kernel thinks
++ * struct kernel_stat should look like... It turns out each arch has a
++ * different opinion on the subject... */
++
++struct kernel_stat {
++ unsigned short st_dev;
++ unsigned short __pad1;
++ unsigned long st_ino;
++ unsigned short st_mode;
++ unsigned short st_nlink;
++ unsigned short st_uid;
++ unsigned short st_gid;
++ unsigned short st_rdev;
++ unsigned short __pad2;
++ unsigned long st_size;
++ unsigned long st_blksize;
++ unsigned long st_blocks;
++ struct timespec st_atim;
++ struct timespec st_mtim;
++ struct timespec st_ctim;
++ unsigned long __unused4;
++ unsigned long __unused5;
++};
++
++struct kernel_stat64 {
++ unsigned char __pad0[6];
++ unsigned short st_dev;
++ unsigned char __pad1[4];
++#define _HAVE_STAT64___ST_INO
++ unsigned long __st_ino;
++ unsigned int st_mode;
++ unsigned int st_nlink;
++ unsigned long st_uid;
++ unsigned long st_gid;
++ unsigned char __pad2[6];
++ unsigned short st_rdev;
++ unsigned char __pad3[4];
++ long long st_size;
++ unsigned long st_blksize;
++ unsigned long st_blocks; /* Number 512-byte blocks allocated. */
++ unsigned long __pad4; /* future possible st_blocks high bits */
++ struct timespec st_atim;
++ struct timespec st_mtim;
++ struct timespec st_ctim;
++ unsigned long long st_ino;
++};
++
++#endif /* _BITS_STAT_STRUCT_H */
+--- /dev/null
++++ b/libc/sysdeps/linux/ubicom32/bits/kernel_types.h
+@@ -0,0 +1,44 @@
++/* Note that we use the exact same include guard #define names
++ * as asm/posix_types.h. This will avoid gratuitous conflicts
++ * with the posix_types.h kernel header, and will ensure that
++ * our private content, and not the kernel header, will win.
++ * -Erik
++ */
++#ifndef __ARCH_UBICOM32_POSIX_TYPES_H
++#define __ARCH_UBICOM32_POSIX_TYPES_H
++
++typedef unsigned long __kernel_dev_t;
++typedef unsigned long __kernel_ino_t;
++typedef unsigned short __kernel_mode_t;
++typedef unsigned short __kernel_nlink_t;
++typedef long __kernel_off_t;
++typedef int __kernel_pid_t;
++typedef unsigned short __kernel_ipc_pid_t;
++typedef unsigned short __kernel_uid_t;
++typedef unsigned short __kernel_gid_t;
++typedef unsigned int __kernel_size_t;
++typedef int __kernel_ssize_t;
++typedef int __kernel_ptrdiff_t;
++typedef long __kernel_time_t;
++typedef long __kernel_suseconds_t;
++typedef long __kernel_clock_t;
++typedef int __kernel_daddr_t;
++typedef char * __kernel_caddr_t;
++typedef unsigned short __kernel_uid16_t;
++typedef unsigned short __kernel_gid16_t;
++typedef unsigned int __kernel_uid32_t;
++typedef unsigned int __kernel_gid32_t;
++typedef unsigned short __kernel_old_uid_t;
++typedef unsigned short __kernel_old_gid_t;
++typedef unsigned short __kernel_old_dev_t;
++typedef long long __kernel_loff_t;
++
++typedef struct {
++#ifdef __USE_ALL
++ int val[2];
++#else
++ int __val[2];
++#endif
++} __kernel_fsid_t;
++
++#endif /* __ARCH_UBICOM32_POSIX_TYPES_H */
+--- /dev/null
++++ b/libc/sysdeps/linux/ubicom32/bits/mman.h
+@@ -0,0 +1,103 @@
++/* Definitions for POSIX memory map interface. Linux/m68k version.
++ Copyright (C) 1997, 2000, 2003, 2005 Free Software Foundation, Inc.
++ This file is part of the GNU C Library.
++
++ The GNU C Library is free software; you can redistribute it and/or
++ modify it under the terms of the GNU Lesser General Public
++ License as published by the Free Software Foundation; either
++ version 2.1 of the License, or (at your option) any later version.
++
++ The GNU C Library is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ Lesser General Public License for more details.
++
++ You should have received a copy of the GNU Lesser General Public
++ License along with the GNU C Library; if not, write to the Free
++ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
++ 02111-1307 USA. */
++
++#ifndef _SYS_MMAN_H
++# error "Never use <bits/mman.h> directly; include <sys/mman.h> instead."
++#endif
++
++/* The following definitions basically come from the kernel headers.
++ But the kernel header is not namespace clean. */
++
++
++/* Protections are chosen from these bits, OR'd together. The
++ implementation does not necessarily support PROT_EXEC or PROT_WRITE
++ without PROT_READ. The only guarantees are that no writing will be
++ allowed without PROT_WRITE and no access will be allowed for PROT_NONE. */
++
++#define PROT_READ 0x1 /* Page can be read. */
++#define PROT_WRITE 0x2 /* Page can be written. */
++#define PROT_EXEC 0x4 /* Page can be executed. */
++#define PROT_NONE 0x0 /* Page can not be accessed. */
++#define PROT_GROWSDOWN 0x01000000 /* Extend change to start of
++ growsdown vma (mprotect only). */
++#define PROT_GROWSUP 0x02000000 /* Extend change to start of
++ growsup vma (mprotect only). */
++
++/* Sharing types (must choose one and only one of these). */
++#define MAP_SHARED 0x01 /* Share changes. */
++#define MAP_PRIVATE 0x02 /* Changes are private. */
++#ifdef __USE_MISC
++# define MAP_TYPE 0x0f /* Mask for type of mapping. */
++#endif
++
++/* Other flags. */
++#define MAP_FIXED 0x10 /* Interpret addr exactly. */
++#ifdef __USE_MISC
++# define MAP_FILE 0
++# define MAP_ANONYMOUS 0x20 /* Don't use a file. */
++# define MAP_ANON MAP_ANONYMOUS
++#endif
++
++/* These are Linux-specific. */
++#ifdef __USE_MISC
++# define MAP_GROWSDOWN 0x0000100 /* Stack-like segment. */
++# define MAP_DENYWRITE 0x0000800 /* ETXTBSY */
++# define MAP_EXECUTABLE 0x0001000 /* Mark it as an executable. */
++# define MAP_LOCKED 0x0002000 /* Lock the mapping. */
++# define MAP_NORESERVE 0x0004000 /* Don't check for reservations. */
++# define MAP_POPULATE 0x0008000 /* Populate (prefault) pagetables. */
++# define MAP_NONBLOCK 0x0010000 /* Do not block on IO. */
++# define MAP_UNINITIALIZE 0x4000000 /* For anonymous mmap, memory could be uninitialized. */
++#endif
++
++/* Flags to `msync'. */
++#define MS_ASYNC 1 /* Sync memory asynchronously. */
++#define MS_SYNC 4 /* Synchronous memory sync. */
++#define MS_INVALIDATE 2 /* Invalidate the caches. */
++
++/* Flags for `mlockall'. */
++#define MCL_CURRENT 1 /* Lock all currently mapped pages. */
++#define MCL_FUTURE 2 /* Lock all additions to address
++ space. */
++
++/* Flags for `mremap'. */
++#ifdef __USE_GNU
++# define MREMAP_MAYMOVE 1
++# define MREMAP_FIXED 2
++#endif
++
++/* Advice to `madvise'. */
++#ifdef __USE_BSD
++# define MADV_NORMAL 0 /* No further special treatment. */
++# define MADV_RANDOM 1 /* Expect random page references. */
++# define MADV_SEQUENTIAL 2 /* Expect sequential page references. */
++# define MADV_WILLNEED 3 /* Will need these pages. */
++# define MADV_DONTNEED 4 /* Don't need these pages. */
++# define MADV_DONTFORK 10 /* Do not inherit across fork. */
++# define MADV_DOFORK 11 /* Do inherit across fork. */
++#endif
++
++/* The POSIX people had to invent similar names for the same things. */
++#ifdef __USE_XOPEN2K
++# define POSIX_MADV_NORMAL 0 /* No further special treatment. */
++# define POSIX_MADV_RANDOM 1 /* Expect random page references. */
++# define POSIX_MADV_SEQUENTIAL 2 /* Expect sequential page references. */
++# define POSIX_MADV_WILLNEED 3 /* Will need these pages. */
++# define POSIX_MADV_DONTNEED 4 /* Don't need these pages. */
++#endif
+--- /dev/null
++++ b/libc/sysdeps/linux/ubicom32/bits/setjmp.h
+@@ -0,0 +1,52 @@
++/* Define the machine-dependent type `jmp_buf'. Ubicom32 version.
++ Copyright (C) 1992,93,95,97,2000 Free Software Foundation, Inc.
++ This file is part of the GNU C Library.
++
++ The GNU C Library is free software; you can redistribute it and/or
++ modify it under the terms of the GNU Lesser General Public
++ License as published by the Free Software Foundation; either
++ version 2.1 of the License, or (at your option) any later version.
++
++ The GNU C Library is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ Lesser General Public License for more details.
++
++ You should have received a copy of the GNU Lesser General Public
++ License along with the GNU C Library; if not, write to the Free
++ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
++ 02111-1307 USA. */
++
++#ifndef _BITS_SETJMP_H
++#define _BITS_SETJMP_H 1
++
++#if !defined _SETJMP_H && !defined _PTHREAD_H
++# error "Never include <bits/setjmp.h> directly; use <setjmp.h> instead."
++#endif
++
++#ifndef _ASM
++/*
++ * This is the structure where we are going to save D10-D13, A0, A1, A2, A5, A6 and SP(A7).
++ * A5 is the return address. Call to setjmp will save these. Call to longjmp will return
++ * Control to the address in A5.
++ */
++typedef struct setjmp_save_struct {
++ unsigned long d10; /* D10 */
++ unsigned long d11; /* D11 */
++ unsigned long d12; /* D12 */
++ unsigned long d13; /* D13 */
++ unsigned long a1; /* A1 */
++ unsigned long a2; /* A2 */
++ unsigned long a5; /* A5 return address. */
++ unsigned long a6; /* A6 */
++ unsigned long sp; /* A7 stack pointer. */
++} __jmp_buf[1];
++
++#endif
++
++/* Test if longjmp to JMPBUF would unwind the frame
++ containing a local variable at ADDRESS. */
++#define _JMPBUF_UNWINDS(jmpbuf, address) \
++ ((void *) (address) < (void*)(jmpbuf)->sp)
++
++#endif /* bits/setjmp.h */
+--- /dev/null
++++ b/libc/sysdeps/linux/ubicom32/bits/stackinfo.h
+@@ -0,0 +1,28 @@
++/* Copyright (C) 1999 Free Software Foundation, Inc.
++ This file is part of the GNU C Library.
++
++ The GNU C Library is free software; you can redistribute it and/or
++ modify it under the terms of the GNU Lesser General Public
++ License as published by the Free Software Foundation; either
++ version 2.1 of the License, or (at your option) any later version.
++
++ The GNU C Library is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ Lesser General Public License for more details.
++
++ You should have received a copy of the GNU Lesser General Public
++ License along with the GNU C Library; if not, write to the Free
++ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
++ 02111-1307 USA. */
++
++/* This file contains a bit of information about the stack allocation
++ of the processor. */
++
++#ifndef _STACKINFO_H
++#define _STACKINFO_H 1
++
++/* On Ubicom32 the stack grows down. */
++#define _STACK_GROWS_DOWN 1
++
++#endif /* stackinfo.h */
+--- /dev/null
++++ b/libc/sysdeps/linux/ubicom32/bits/syscalls.h
+@@ -0,0 +1,81 @@
++#ifndef _BITS_SYSCALLS_H
++#define _BITS_SYSCALLS_H
++#ifndef _SYSCALL_H
++# error "Never use <bits/syscalls.h> directly; include <sys/syscall.h> instead."
++#endif
++
++/* m68k headers does stupid stuff with __NR_iopl / __NR_vm86:
++ * #define __NR_iopl not supported
++ * #define __NR_vm86 not supported
++ */
++#undef __NR_iopl
++#undef __NR_vm86
++
++#ifndef __ASSEMBLER__
++
++#include <errno.h>
++
++/* Linux takes system call arguments in registers:
++
++ syscall number %d8
++ arg 1 %d0
++ arg 2 %d1
++ arg 3 %d2
++ arg 4 %d3
++ arg 5 %d4
++ arg 6 %d5
++*/
++
++#define __loadargs_0(name, dummy) \
++ d8 = (long int)name
++
++#define __loadargs_1(name, __arg1) \
++ __loadargs_0(name, 0); \
++ d0_retval = (long int) __arg1
++
++#define __loadargs_2(name, __arg1, __arg2) \
++ __loadargs_1(name, __arg1); \
++ d1 = (long int) __arg2
++
++#define __loadargs_3(name, __arg1, __arg2, __arg3) \
++ __loadargs_2(name, __arg1, __arg2); \
++ d2 = (long int) __arg3
++
++#define __loadargs_4(name, __arg1, __arg2, __arg3, __arg4) \
++ __loadargs_3(name, __arg1, __arg2, __arg3); \
++ d3 = (long int)__arg4
++
++#define __loadargs_5(name, __arg1, __arg2, __arg3, __arg4, __arg5) \
++ __loadargs_4(name, __arg1, __arg2, __arg3, __arg4); \
++ d4 = (long int)__arg5
++
++#define __loadargs_6(name, __arg1, __arg2, __arg3, __arg4, __arg5, __arg6) \
++ __loadargs_5(name, __arg1, __arg2, __arg3, __arg4, __arg5); \
++ d5 = (long int)__arg6
++
++#define INTERNAL_SYSCALL_NCS(name, err, nr, args...) \
++({ \
++ register long int d0_retval __asm__ ("d0"); \
++ register long int d1 __asm__ ("d1"); \
++ register long int d2 __asm__ ("d2"); \
++ register long int d3 __asm__ ("d3"); \
++ register long int d4 __asm__ ("d4"); \
++ register long int d5 __asm__ ("d5"); \
++ register long int d8 __asm__ ("d8"); \
++ __loadargs_##nr (name, args); \
++ __asm__ __volatile__ ( \
++ " moveai a5, #%%hi(0x40400000)\n\t" \
++ " calli a5, 16(a5)\n\t" \
++ : "+r" (d0_retval), "+r" (d1), "+r" (d2), "+r" (d3), \
++ "+r" (d4), "+r" (d5), "+r" (d8) : \
++ : "cc", "memory", \
++ "acc0_lo", "acc0_hi", "acc1_lo", "acc1_hi", \
++ "source3", \
++ "a0", "a3", "a4", "a5", \
++ "d6", "d7", "d9", "d14", "d15" \
++ ); \
++ d0_retval; \
++})
++
++#endif /* __ASSEMBLER__ */
++#endif /* _BITS_SYSCALLS_H */
+--- /dev/null
++++ b/libc/sysdeps/linux/ubicom32/bits/uClibc_arch_features.h
+@@ -0,0 +1,45 @@
++/*
++ * Track misc arch-specific features that aren't config options
++ */
++
++#ifndef _BITS_UCLIBC_ARCH_FEATURES_H
++#define _BITS_UCLIBC_ARCH_FEATURES_H
++
++/* instruction used when calling abort() to kill yourself */
++/*#define __UCLIBC_ABORT_INSTRUCTION__ "asm instruction"*/
++#undef __UCLIBC_ABORT_INSTRUCTION__
++
++/* can your target use syscall6() for mmap ? */
++#undef __UCLIBC_MMAP_HAS_6_ARGS__
++
++/* does your target use syscall4() for truncate64 ? (32bit arches only) */
++#undef __UCLIBC_TRUNCATE64_HAS_4_ARGS__
++
++/* does your target have a broken create_module() ? */
++#undef __UCLIBC_BROKEN_CREATE_MODULE__
++
++/* does your target have to worry about older [gs]etrlimit() ? */
++#undef __UCLIBC_HANDLE_OLDER_RLIMIT__
++
++/* does your target prefix all symbols with an _ ? */
++#define __UCLIBC_NO_UNDERSCORES__
++
++/* does your target have an asm .set ? */
++#define __UCLIBC_HAVE_ASM_SET_DIRECTIVE__
++
++/* define if target doesn't like .global */
++#undef __UCLIBC_ASM_GLOBAL_DIRECTIVE__
++
++/* define if target supports .weak */
++#define __UCLIBC_HAVE_ASM_WEAK_DIRECTIVE__
++
++/* define if target supports .weakext */
++#undef __UCLIBC_HAVE_ASM_WEAKEXT_DIRECTIVE__
++
++/* needed probably only for ppc64 */
++#undef __UCLIBC_HAVE_ASM_GLOBAL_DOT_NAME__
++
++/* define if target supports IEEE signed zero floats */
++#define __UCLIBC_HAVE_SIGNED_ZERO__
++
++#endif /* _BITS_UCLIBC_ARCH_FEATURES_H */
+--- /dev/null
++++ b/libc/sysdeps/linux/ubicom32/bits/wordsize.h
+@@ -0,0 +1,19 @@
++/* Copyright (C) 1999 Free Software Foundation, Inc.
++ This file is part of the GNU C Library.
++
++ The GNU C Library is free software; you can redistribute it and/or
++ modify it under the terms of the GNU Lesser General Public
++ License as published by the Free Software Foundation; either
++ version 2.1 of the License, or (at your option) any later version.
++
++ The GNU C Library is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ Lesser General Public License for more details.
++
++ You should have received a copy of the GNU Lesser General Public
++ License along with the GNU C Library; if not, write to the Free
++ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
++ 02111-1307 USA. */
++
++#define __WORDSIZE 32
+--- /dev/null
++++ b/libc/sysdeps/linux/ubicom32/clone.S
+@@ -0,0 +1,71 @@
++#include <sys/syscall.h>
++
++ .global __syscall_error
++
++/* int _clone(int (*fn)(void *arg), void *child_stack, int flags, void *arg); */
++ .text
++ .type clone,@function
++ .global clone
++clone:
++ /* Sanity check arguments. */
++ sub.4 #0, #0, d0 /* Test if fn is zero. */
++ jmpeq.f 1f /* arg bad */
++ sub.4 #0, #0, d1 /* Test if child_stack is zero. */
++ jmpeq.f 1f /* arg bad */
++
++ /* Set up child_stack frame.. arg and fn */
++ move.4 a3, d1
++ move.4 -4(a3)++, d3 /* push 'arg' to child stack */
++ move.4 -4(a3)++, d0 /* push fn to child stack, this will become a5
++ * on new child */
++ move.4 d1, a3
++ move.4 -4(sp)++, a5 /* push a5 to our stack */
++
++ /*
++ * The syscall clone is clone(int flags, void *child_stack) so we set
++ * that up now
++ */
++ move.4 d0, d2 /* Move flags to d0 */
++
++ /* Do Clone syscall */
++ movei d8, #__NR_clone
++ moveai a5, #%hi(0x40400000)
++ calli a5, 0x10(a5)
++ move.4 a5, (sp)4++ /* pop a5 from stack */
++
++ /* Clone Complete */
++ cmpi d0, #0 /* Test if d0 is less than zero. If it is we
++ * return the error */
++ jmplt.f 2f /* If return is less than we had an error */
++ jmpeq.f 3f /* If return is 0 we are in the clone, jump to
++ * thread start */
++ ret a5 /* d0 is pid */
++
++ /* Invalid Value */
++1: movei d0, #-22 /* EINVAL */
++
++ /* Call syscall Error */
++2: sub.4 d0, #0, d0 /* d0 = -d0 */
++#if defined(__UBICOM32_FDPIC__)
++ call a3, __syscall_error
++#else
++ moveai a3, #%hi(__syscall_error)
++ calli a3, %lo(__syscall_error)(a3)
++#endif
++ /* Child Thread Start */
++3:
++#if defined(__UBICOM32_FDPIC__)
++ /* a5 actually contains a function descriptor for fdpic */
++ move.4 a0, 4(a5) /* set GOT for this function */
++ move.4 a5, 0(a5) /* get address of entry point */
++#endif
++ move.4 d0, (sp)4++ /* pop 'arg' to stack */
++ calli a5, 0(a5)
++ movei d8, #__NR_exit
++ moveai a3, #%hi(0x40400000)
++ calli a3, 0x10(a3)
++
++ .size clone, . - clone
++ .global __GI_clone
++ .hidden __GI_clone
++ .set __GI_clone,clone
+--- /dev/null
++++ b/libc/sysdeps/linux/ubicom32/crt1.S
+@@ -0,0 +1,179 @@
++/* Startup code compliant to the ELF m68k ABI.
++ Copyright (C) 1996, 1997, 1998, 2001, 2002 Free Software Foundation, Inc.
++ This file is part of the GNU C Library.
++
++ The GNU C Library is free software; you can redistribute it and/or
++ modify it under the terms of the GNU Lesser General Public
++ License as published by the Free Software Foundation; either
++ version 2.1 of the License, or (at your option) any later version.
++
++ In addition to the permissions in the GNU Lesser General Public
++ License, the Free Software Foundation gives you unlimited
++ permission to link the compiled version of this file with other
++ programs, and to distribute those programs without any restriction
++ coming from the use of this file. (The GNU Lesser General Public
++ License restrictions do apply in other respects; for example, they
++ cover modification of the file, and distribution when not linked
++ into another program.)
++
++ Note that people who make modified versions of this file are not
++ obligated to grant this special exception for their modified
++ versions; it is their choice whether to do so. The GNU Lesser
++ General Public License gives permission to release a modified
++ version without this exception; this exception also makes it
++ possible to release a modified version which carries forward this
++ exception.
++
++ The GNU C Library is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ Lesser General Public License for more details.
++
++ You should have received a copy of the GNU Lesser General Public
++ License along with the GNU C Library; if not, write to the Free
++ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
++ 02111-1307 USA. */
++
++#include <features.h>
++
++/* This is the canonical entry point, usually the first thing in the text
++ segment. The SVR4/m68k ABI says that when the entry point runs,
++ most registers' values are unspecified, except for:
++
++ %a1 Contains a function pointer to be registered with `atexit'.
++ This is how the dynamic linker arranges to have DT_FINI
++ functions called for shared libraries that have been loaded
++ before this code runs.
++
++ %sp The stack contains the arguments and environment:
++ 0(%sp) argc
++ 4(%sp) argv[0]
++ ...
++ (4*argc)(%sp) NULL
++ (4*(argc+1))(%sp) envp[0]
++ ...
++ NULL
++
++ The uclinux conventions are different. %a1 is not defined on entry
++ and the stack is laid out as follows:
++
++ 0(%sp) argc
++ 4(%sp) argv
++ 8(%sp) envp
++*/
++
++
++ .text
++ .type main,@function
++ .type _init,%function
++ .type _fini,%function
++#ifndef __UCLIBC_CTOR_DTOR__
++ .weak _init
++ .weak _fini
++#endif
++ .globl _start
++ .global __uClibc_main;
++ .type __uClibc_main,@function;
++ .type _start,@function
++_start:
++
++#if defined(__UBICOM32_FDPIC__) && !defined(L_Scrt1)
++ /* P0 contains a pointer to the program's load map. */
++ call a3, .Lcall;
++.Lcall:
++ move.4 d0, d1 ; load exec_map_addr
++ moveai a4, #%hi(.Lcall)
++ lea.1 d15, %lo(.Lcall)(a4)
++ sub.4 d15, a3, d15 ; difference between .Lcall and actual address of .Lcall
++ moveai a3, #%hi(__ROFIXUP_LIST__)
++ lea.1 d1, %lo(__ROFIXUP_LIST__)(a3)
++ moveai a3, #%hi(__ROFIXUP_END__)
++ lea.1 d2, %lo(__ROFIXUP_END__)(a3)
++ add.4 d1, d1, d15
++ add.4 d2, d2, d15
++ call a5, __self_reloc ; returns GOT in d0
++ move.4 a0, d0 ; set GOT
++#endif
++
++/*
++ all this is setup to make the following call.
++
++ void __uClibc_main(
++ d0 - int (*main)(int, char **, char **),
++ d1 - int argc, (d1)
++ d2 - char **argv,
++ d3 - void (*app_init)(void),
++ d4 - void (*app_fini)(void),
++ d5 - void (*rtld_fini)(void),
++ d6 - void *stack_end
++ );
++ */
++
++ /*
++ * Load pointer to main into d0
++ */
++#ifdef __UBICOM32_FDPIC__
++ movei d0, #%got_funcdesc_lo(main)
++ move.4 d0, (a0, d0)
++#else
++ moveai a3, #%hi(main)
++ lea.1 d0, %lo(main)(a3)
++#endif
++
++ /*
++ * Grab the environment stuff from stack and set up d1, d2 with it.
++ */
++ move.4 d1, (sp)
++#ifdef __UBICOM32_FDPIC__
++ /* For FDPIC the calling convention is different than flat */
++ lea.1 d2, 4(sp)
++#else
++ move.4 d2, 4(sp)
++#endif
++
++#ifdef __UCLIBC_CTOR_DTOR__
++ /*
++ * Load pointer to _init into d3
++ */
++#ifdef __UBICOM32_FDPIC__
++ movei d3, #%got_funcdesc_lo(_init)
++ move.4 d3, (a0, d3)
++#else
++ moveai a3, #%hi(_init)
++ lea.1 d3, %lo(_init)(a3)
++#endif
++
++ /*
++ * Load pointer to _fini into d4
++ */
++#ifdef __UBICOM32_FDPIC__
++ movei d4, #%got_funcdesc_lo(_fini)
++ move.4 d4, (a0, d4)
++#else
++ moveai a3, #%hi(_fini)
++ lea.1 d4, %lo(_fini)(a3)
++#endif
++
++#else /* !__UCLIBC_CTOR_DTOR__ */
++ move.4 d3, #0 ; _init
++ move.4 d4, #0 ; _fini
++#endif
++
++#ifdef __UBICOM32_FDPIC__
++ move.4 d5, a1 ; ldso _fini funcdesc (see dl-startup.h)
++#else
++ movei d5, #0 ; rtld_fini (not used)
++#endif
++
++ move.4 d6, sp ; Stack End.
++
++ /* Call the user's main function, and exit with its value. But
++ let the libc call main. */
++#ifdef __UBICOM32_FDPIC__
++ call a5, __uClibc_main
++#else
++ moveai a5, #%hi(__uClibc_main)
++ calli a5, %lo(__uClibc_main)(a5)
++#endif
++
++ bkpt #-1 ; Crash if somehow `exit' does return.
+--- /dev/null
++++ b/libc/sysdeps/linux/ubicom32/crti.S
+@@ -0,0 +1,54 @@
++/* Specialized code needed to support construction and destruction of
++ file-scope objects in C++ and Java code, and to support exception handling.
++ Copyright (C) 1999 Free Software Foundation, Inc.
++ Contributed by Charles-Antoine Gauthier (charles.gauthier@iit.nrc.ca).
++
++This file is part of GCC.
++
++GCC is free software; you can redistribute it and/or modify
++it under the terms of the GNU General Public License as published by
++the Free Software Foundation; either version 2, or (at your option)
++any later version.
++
++GCC is distributed in the hope that it will be useful,
++but WITHOUT ANY WARRANTY; without even the implied warranty of
++MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++GNU General Public License for more details.
++
++You should have received a copy of the GNU General Public License
++along with GCC; see the file COPYING. If not, write to
++the Free Software Foundation, 59 Temple Place - Suite 330,
++Boston, MA 02111-1307, USA. */
++
++/* As a special exception, if you link this library with files
++ compiled with GCC to produce an executable, this does not cause
++ the resulting executable to be covered by the GNU General Public License.
++ This exception does not however invalidate any other reasons why
++ the executable file might be covered by the GNU General Public License. */
++
++/*
++ * This file just supplies function prologues for the .init and .fini
++ * sections. It is linked in before crtbegin.o.
++ */
++ .file "crti.o"
++ .ident "GNU C crti.o"
++
++ .section .init
++ .align 2
++ .globl _init
++ .type _init, @function
++_init:
++ move.4 -4(sp)++, a5
++#ifdef __UBICOM32_FDPIC__
++ move.4 -4(sp)++, a0
++#endif
++
++ .section .fini
++ .align 2
++ .globl _fini
++ .type _fini, @function
++_fini:
++ move.4 -4(sp)++, a5
++#ifdef __UBICOM32_FDPIC__
++ move.4 -4(sp)++, a0
++#endif
+--- /dev/null
++++ b/libc/sysdeps/linux/ubicom32/crtn.S
+@@ -0,0 +1,47 @@
++/* Specialized code needed to support construction and destruction of
++ file-scope objects in C++ and Java code, and to support exception handling.
++ Copyright (C) 1999 Free Software Foundation, Inc.
++ Contributed by Charles-Antoine Gauthier (charles.gauthier@iit.nrc.ca).
++
++This file is part of GCC.
++
++GCC is free software; you can redistribute it and/or modify
++it under the terms of the GNU General Public License as published by
++the Free Software Foundation; either version 2, or (at your option)
++any later version.
++
++GCC is distributed in the hope that it will be useful,
++but WITHOUT ANY WARRANTY; without even the implied warranty of
++MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++GNU General Public License for more details.
++
++You should have received a copy of the GNU General Public License
++along with GCC; see the file COPYING. If not, write to
++the Free Software Foundation, 59 Temple Place - Suite 330,
++Boston, MA 02111-1307, USA. */
++
++/* As a special exception, if you link this library with files
++ compiled with GCC to produce an executable, this does not cause
++ the resulting executable to be covered by the GNU General Public License.
++ This exception does not however invalidate any other reasons why
++ the executable file might be covered by the GNU General Public License. */
++
++/*
++ * This file supplies function epilogues for the .init and .fini sections.
++ * It is linked in after all other files.
++ */
++
++ .file "crtn.o"
++ .ident "GNU C crtn.o"
++
++ .section .init
++#ifdef __UBICOM32_FDPIC__
++ move.4 a0, (sp)4++
++#endif
++ ret (sp)4++
++
++ .section .fini
++#ifdef __UBICOM32_FDPIC__
++ move.4 a0, (sp)4++
++#endif
++ ret (sp)4++
+--- /dev/null
++++ b/libc/sysdeps/linux/ubicom32/crtreloc.c
+@@ -0,0 +1,145 @@
++/* Copyright (C) 2003, 2004 Free Software Foundation, Inc.
++ written by Alexandre Oliva <aoliva@redhat.com>
++This file is part of the GNU C Library.
++
++The GNU C Library is free software; you can redistribute it and/or
++modify it under the terms of the GNU Lesser General Public License as
++published by the Free Software Foundation; either version 2.1 of the
++License, or (at your option) any later version.
++
++In addition to the permissions in the GNU Lesser General Public
++License, the Free Software Foundation gives you unlimited
++permission to link the compiled version of this file with other
++programs, and to distribute those programs without any restriction
++coming from the use of this file. (The GNU Lesser General Public
++License restrictions do apply in other respects; for example, they
++cover modification of the file, and distribution when not linked
++into another program.)
++
++The GNU C Library is distributed in the hope that it will be useful,
++but WITHOUT ANY WARRANTY; without even the implied warranty of
++MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++Library General Public License for more details.
++
++You should have received a copy of the GNU Lesser General Public
++License along with the GNU C Library; see the file COPYING.LIB. If
++not, write to the Free Software Foundation, Inc., 675 Mass Ave,
++Cambridge, MA 02139, USA. */
++
++#ifdef __UBICOM32_FDPIC__
++
++#include <sys/types.h>
++#include <link.h>
++
++/* This file is to be compiled into crt object files, to enable
++ executables to easily self-relocate. */
++
++union word {
++ char c[4];
++ void *v;
++};
++
++/* Compute the runtime address of pointer in the range [p,e), and then
++ map the pointer pointed by it. */
++static __always_inline void ***
++reloc_range_indirect (void ***p, void ***e,
++ const struct elf32_fdpic_loadmap *map)
++{
++ while (p < e)
++ {
++ if (*p != (void **)-1)
++ {
++ void *ptr = __reloc_pointer (*p, map);
++ if (ptr != (void *)-1)
++ {
++ void *pt;
++ if ((long)ptr & 3)
++ {
++ unsigned char *c = ptr;
++ int i;
++ unsigned long v = 0;
++ for (i = 0; i < 4; i++)
++ v |= c[i] << 8 * i;
++ pt = (void *)v;
++ }
++ else
++ pt = *(void**)ptr;
++ pt = __reloc_pointer (pt, map);
++ if ((long)ptr & 3)
++ {
++ unsigned char *c = ptr;
++ int i;
++ unsigned long v = (unsigned long)pt;
++ for (i = 0; i < 4; i++, v >>= 8)
++ c[i] = v;
++ }
++ else
++ *(void**)ptr = pt;
++ }
++ }
++ p++;
++ }
++ return p;
++}
++
++/* Call __reloc_range_indirect for the given range except for the last
++ entry, whose contents are only relocated. It's expected to hold
++ the GOT value. */
++void* attribute_hidden
++__self_reloc (const struct elf32_fdpic_loadmap *map,
++ void ***p, void ***e)
++{
++ p = reloc_range_indirect (p, e-1, map);
++
++ if (p >= e)
++ return (void*)-1;
++
++ return __reloc_pointer (*p, map);
++}
++
++#if 0
++/* These are other functions that might be useful, but that we don't
++ need. */
++
++/* Remap pointers in [p,e). */
++static __always_inline void**
++reloc_range (void **p, void **e,
++ const struct elf32_fdpic_loadmap *map)
++{
++ while (p < e)
++ {
++ *p = __reloc_pointer (*p, map);
++ p++;
++ }
++ return p;
++}
++
++/* Remap p, adjust e by the same offset, then map the pointers in the
++ range determined by them. */
++void attribute_hidden
++__reloc_range (const struct elf32_fdpic_loadmap *map,
++ void **p, void **e)
++{
++ void **old = p;
++
++ p = __reloc_pointer (p, map);
++ e += p - old;
++ reloc_range (p, e, map);
++}
++
++/* Remap p, adjust e by the same offset, then map pointers referenced
++ by the (unadjusted) pointers in the range. Return the relocated
++ value of the last pointer in the range. */
++void* attribute_hidden
++__reloc_range_indirect (const struct elf32_fdpic_loadmap *map,
++ void ***p, void ***e)
++{
++ void ***old = p;
++
++ p = __reloc_pointer (p, map);
++ e += p - old;
++ return reloc_range_indirect (p, e, map);
++}
++#endif
++
++#endif /* __UBICOM32_FDPIC__ */
+--- /dev/null
++++ b/libc/sysdeps/linux/ubicom32/setjmp.S
+@@ -0,0 +1,72 @@
++/* Setjmp for Ubicom32 */
++ .text
++ .global _setjmp
++ .type _setjmp,@function
++_setjmp:
++ movea a3, d0 ; A3 now holds the jmp buf that was passed in.
++ move.4 (a3)4++, d10
++ move.4 (a3)4++, d11
++ move.4 (a3)4++, d12
++ move.4 (a3)4++, d13
++ move.4 (a3)4++, a1
++ move.4 (a3)4++, a2
++ move.4 (a3)4++, a5
++ move.4 (a3)4++, a6
++ move.4 (a3)4++, a7
++ move.4 d0, #0
++
++ calli a5, 0(a5)
++ .size _setjmp, . - _setjmp
++
++/*
++ * __sigsetjmp for Ubicom32
++ * d0 holds sigjmp_buf and d1 holds the savemask. We will save the frame and then just call __sigjmp_save to do the mask save.
++ */
++ .global __sigsetjmp
++ .type __sigsetjmp,@function
++__sigsetjmp:
++ movea a3, d0 ; A3 now holds the jmp buf that was passed in.
++ move.4 (a3)4++, d10
++ move.4 (a3)4++, d11
++ move.4 (a3)4++, d12
++ move.4 (a3)4++, d13
++ move.4 (a3)4++, a1
++ move.4 (a3)4++, a2
++ move.4 (a3)4++, a5
++ move.4 (a3)4++, a6
++ move.4 (a3)4++, a7
++
++ ;; The frame has been saved. Call _sigjmp_save to get sigmask saved. a5 still has the return address and it will go back to that.
++#if defined(__UBICOM32_FDPIC__)
++ call a3, __sigjmp_save
++#else
++ moveai a3, #%hi(__sigjmp_save)
++ calli a3, %lo(__sigjmp_save)(a3)
++#endif
++ .size __sigjmp_save, . - __sigjmp_save
++
++ .global __longjmp
++ .type __longjmp,@function
++__longjmp:
++ movea a3, d0 ; A3 now holds the jmp buf that was passed in.
++ move.4 d10, (a3)4++
++ move.4 d11, (a3)4++
++ move.4 d12, (a3)4++
++ move.4 d13, (a3)4++
++ move.4 a1 , (a3)4++
++ move.4 a2 , (a3)4++
++ move.4 a5 , (a3)4++
++ move.4 a6 , (a3)4++
++ move.4 a7 , (a3)4++
++
++ sub.4 #0, #0, d1 ; Test if d1 is zero. If it is we have to return 1 other wise return content of d1
++ jmpeq.t 2f
++ move.4 d0, d1 ; d1 is non zero load it into d0
++ jmpt.t 3f
++
++2: move.4 d0, #1
++3: calli a5, 0(a5)
++ .size __longjmp, . - __longjmp
++ .global __GI___longjmp
++ .hidden __GI___longjmp
++ .set __GI___longjmp,__longjmp
+--- /dev/null
++++ b/libc/sysdeps/linux/ubicom32/sys/procfs.h
+@@ -0,0 +1,122 @@
++/* Copyright (C) 1996, 1997, 1999, 2000 Free Software Foundation, Inc.
++ This file is part of the GNU C Library.
++
++ The GNU C Library is free software; you can redistribute it and/or
++ modify it under the terms of the GNU Lesser General Public
++ License as published by the Free Software Foundation; either
++ version 2.1 of the License, or (at your option) any later version.
++
++ The GNU C Library is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ Lesser General Public License for more details.
++
++ You should have received a copy of the GNU Lesser General Public
++ License along with the GNU C Library; if not, write to the Free
++ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
++ 02111-1307 USA. */
++
++#ifndef _SYS_PROCFS_H
++#define _SYS_PROCFS_H 1
++
++/* This is somehow modelled after the file of the same name on SysVr4
++ systems. It provides a definition of the core file format for ELF
++ used on Linux. */
++
++#include <features.h>
++#include <signal.h>
++#include <sys/time.h>
++#include <sys/types.h>
++#include <sys/ucontext.h>
++#include <bits/wordsize.h>
++
++__BEGIN_DECLS
++
++#define ELF_NGREG 38
++
++typedef struct
++ {
++ union
++ {
++ unsigned long pr_regs[32];
++ double pr_dregs[16];
++ } pr_fr;
++ unsigned long __unused;
++ unsigned long pr_fsr;
++ unsigned char pr_qcnt;
++ unsigned char pr_q_entrysize;
++ unsigned char pr_en;
++ unsigned int pr_q[64];
++ } elf_fpregset_t;
++
++typedef unsigned long elf_greg_t;
++typedef elf_greg_t elf_gregset_t[ELF_NGREG];
++
++struct elf_siginfo
++ {
++ int si_signo; /* Signal number. */
++ int si_code; /* Extra code. */
++ int si_errno; /* Errno. */
++ };
++
++/* Definitions to generate Intel SVR4-like core files. These mostly
++ have the same names as the SVR4 types with "elf_" tacked on the
++ front to prevent clashes with linux definitions, and the typedef
++ forms have been avoided. This is mostly like the SVR4 structure,
++ but more Linuxy, with things that Linux does not support and which
++ gdb doesn't really use excluded. Fields present but not used are
++ marked with "XXX". */
++struct elf_prstatus
++ {
++ struct elf_siginfo pr_info; /* Info associated with signal. */
++ short int pr_cursig; /* Current signal. */
++ unsigned long int pr_sigpend; /* Set of pending signals. */
++ unsigned long int pr_sighold; /* Set of held signals. */
++ __pid_t pr_pid;
++ __pid_t pr_ppid;
++ __pid_t pr_pgrp;
++ __pid_t pr_sid;
++ struct timeval pr_utime; /* User time. */
++ struct timeval pr_stime; /* System time. */
++ struct timeval pr_cutime; /* Cumulative user time. */
++ struct timeval pr_cstime; /* Cumulative system time. */
++ elf_gregset_t pr_reg; /* GP registers. */
++ int pr_fpvalid; /* True if math copro being used. */
++ };
++
++
++#define ELF_PRARGSZ (80) /* Number of chars for args */
++
++struct elf_prpsinfo
++ {
++ char pr_state; /* Numeric process state. */
++ char pr_sname; /* Char for pr_state. */
++ char pr_zomb; /* Zombie. */
++ char pr_nice; /* Nice val. */
++ unsigned long int pr_flag; /* Flags. */
++ unsigned short int pr_uid;
++ unsigned short int pr_gid;
++ int pr_pid, pr_ppid, pr_pgrp, pr_sid;
++ /* Lots missing */
++ char pr_fname[16]; /* Filename of executable. */
++ char pr_psargs[ELF_PRARGSZ]; /* Initial part of arg list. */
++ };
++
++/* Addresses. */
++typedef void *psaddr_t;
++
++/* Register sets. Linux has different names. */
++typedef elf_gregset_t prgregset_t;
++typedef elf_fpregset_t prfpregset_t;
++
++/* We don't have any differences between processes and threads,
++ therefore have only one PID type. */
++typedef __pid_t lwpid_t;
++
++
++typedef struct elf_prstatus prstatus_t;
++typedef struct elf_prpsinfo prpsinfo_t;
++
++__END_DECLS
++
++#endif /* sys/procfs.h */
+--- /dev/null
++++ b/libc/sysdeps/linux/ubicom32/sys/ucontext.h
+@@ -0,0 +1,104 @@
++/* Copyright (C) 1998, 1999 Free Software Foundation, Inc.
++ This file is part of the GNU C Library.
++
++ The GNU C Library is free software; you can redistribute it and/or
++ modify it under the terms of the GNU Lesser General Public
++ License as published by the Free Software Foundation; either
++ version 2.1 of the License, or (at your option) any later version.
++
++ The GNU C Library is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ Lesser General Public License for more details.
++
++ You should have received a copy of the GNU Lesser General Public
++ License along with the GNU C Library; if not, write to the Free
++ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
++ 02111-1307 USA. */
++
++#ifndef _SYS_UCONTEXT_H
++#define _SYS_UCONTEXT_H 1
++
++#include <features.h>
++#include <signal.h>
++/*
++ * Location of the users' stored registers relative to R0.
++ * Usage is as an index into a gregset_t array or as u.u_ar0[XX].
++ */
++#define REG_PSR (0)
++#define REG_PC (1)
++#define REG_SPARE (2)
++#define REG_WVALID (3)
++#define REG_G1 (4)
++#define REG_G2 (5)
++#define REG_G3 (6)
++#define REG_G4 (7)
++#define REG_G5 (8)
++#define REG_G6 (9)
++#define REG_G7 (10)
++#define REG_O0 (11)
++#define REG_O1 (12)
++#define REG_O2 (13)
++#define REG_O3 (14)
++#define REG_O4 (15)
++#define REG_O5 (16)
++#define REG_O6 (17)
++#define REG_O7 (18)
++#define REG_GLOBALS (19)
++
++/*
++ * A gregset_t is defined as an array type for compatibility with the reference
++ * source. This is important due to differences in the way the C language
++ * treats arrays and structures as parameters.
++ *
++ * Note that NGREG is really (sizeof (struct regs) / sizeof (greg_t)),
++ * but that the ABI defines it absolutely to be 21 (resp. 19).
++ */
++
++#define NGREG 20
++typedef int greg_t;
++
++typedef greg_t gregset_t[NGREG];
++
++/*
++ * The following structures define how a register window can appear on the
++ * stack. This structure is available (when required) through the `gwins'
++ * field of an mcontext (nested within ucontext). NIOS_MAXWINDOW is the
++ * maximum number of outstanding register windows defined in the NIOS
++ * architecture (*not* implementation).
++ */
++#define NIOS_MAXREGWINDOW 31 /* max windows in NIOS arch. */
++struct rwindow
++ {
++ greg_t rw_local[8]; /* locals */
++ greg_t rw_in[8]; /* ins */
++ };
++
++#define rw_fp rw_in[6] /* frame pointer */
++#define rw_rtn rw_in[7] /* return address */
++
++typedef struct gwindows
++ {
++ int wbcnt;
++ int *spbuf[NIOS_MAXREGWINDOW];
++ struct rwindow wbuf[NIOS_MAXREGWINDOW];
++ } gwindows_t;
++
++typedef struct
++ {
++ gregset_t gregs; /* general register set */
++ gwindows_t *gwins; /* POSSIBLE pointer to register windows */
++ } mcontext_t;
++
++
++/* Userlevel context. */
++typedef struct ucontext
++ {
++ unsigned long uc_flags;
++ struct ucontext *uc_link;
++ __sigset_t uc_sigmask;
++ stack_t uc_stack;
++ mcontext_t uc_mcontext;
++ } ucontext_t;
++
++#endif /* sys/ucontext.h */
+--- /dev/null
++++ b/libc/sysdeps/linux/ubicom32/syscall.c
+@@ -0,0 +1,32 @@
++/* vi: set sw=4 ts=4: */
++/* syscall for ubicom32/uClibc
++ *
++ * Copyright (C) 2008 by Ubicom Inc.
++ * Copyright (C) 2002 by Erik Andersen <andersen@uclibc.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU Library General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU Library General Public License
++ * along with this program; if not, write to the Free Software Foundation,
++ * Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#include <features.h>
++#include <errno.h>
++#include <sys/types.h>
++#include <sys/syscall.h>
++
++extern long syscall(long sysnum, long a, long b, long c, long d, long e, long f);
++long syscall(long sysnum, long a, long b, long c, long d, long e, long f)
++{
++ int __NR_syscall_number = sysnum;
++ return (long) INLINE_SYSCALL(syscall_number, 6, a, b, c, d, e, f);
++}
+--- /dev/null
++++ b/libc/sysdeps/linux/ubicom32/vfork.S
+@@ -0,0 +1,35 @@
++#include <sys/syscall.h>
++
++ .text
++ .type vfork,@function
++ .global vfork
++vfork:
++ move.4 -4(sp)++, a5 ; Save return address on the stack.
++ movei d8, #__NR_vfork
++ moveai a3, #%hi(0x40400000)
++ calli a5, 0x10(a3)
++
++ /*
++ * You get here only if the syscall bombed. If things had worked out the
++ * parent and child would have both returned to the instruction after
++ * the vfork call.
++ */
++ move.4 a5, (sp)4++ ; Pop the return address off the stack.
++ movei d1, #-125
++ sub.4 #0, d0, d1
++ jmplt.t 1f
++
++ ;; We have an error.
++ sub.4 d0, #0, d0 ; d0 = -res. Call __set_errno with that.
++#if defined(__UBICOM32_FDPIC__)
++ call a3, __syscall_error
++#else
++ moveai a3, #%hi(__syscall_error)
++ calli a3, %lo(__syscall_error)(a3) ; __syscall_error will return -1 and not come back here.
++#endif
++1:
++ calli a5, 0(a5)
++ .size vfork, . - vfork
++ .global __GI_vfork
++ .hidden __GI_vfork
++ .set __GI_vfork,vfork
+--- a/libpthread/linuxthreads.old/pthread.c
++++ b/libpthread/linuxthreads.old/pthread.c
+@@ -393,6 +393,10 @@ void __pthread_initialize_minimal(void)
+ #endif
+
+ __libc_multiple_threads_ptr = __libc_pthread_init (ptr_pthread_functions);
++#ifndef __ARCH_USE_MMU__
++ __pthread_initial_thread_tos =
++ (char *)(((long)CURRENT_STACK_FRAME + getpagesize()) & ~(getpagesize() - 1));
++#endif /* __ARCH_USE_MMU__ */
+ }
+
+
+@@ -461,8 +465,11 @@ static void pthread_initialize(void)
+ * __pthread_initial_thread_bos at address 0. These bounds are refined as we
+ * malloc other stack frames such that they don't overlap. -StS
+ */
+- __pthread_initial_thread_tos =
+- (char *)(((long)CURRENT_STACK_FRAME + getpagesize()) & ~(getpagesize() - 1));
++ if (__pthread_initial_thread_tos == NULL) {
++ __pthread_initial_thread_tos =
++ (char *)(((long)CURRENT_STACK_FRAME + getpagesize()) & ~(getpagesize() - 1));
++ }
++
+ __pthread_initial_thread_bos = (char *) 1; /* set it non-zero so we know we have been here */
+ PDEBUG("initial thread stack bounds: bos=%p, tos=%p\n",
+ __pthread_initial_thread_bos, __pthread_initial_thread_tos);
+--- /dev/null
++++ b/libpthread/linuxthreads.old/sysdeps/ubicom32/pt-machine.h
+@@ -0,0 +1,68 @@
++/* Machine-dependent pthreads configuration and inline functions.
++
++ Copyright (C) 1996, 1997, 1998, 2000, 2002, 2003, 2004
++ Free Software Foundation, Inc.
++ This file is part of the GNU C Library.
++ Contributed by Ralf Baechle <ralf@gnu.org>.
++ Based on the Alpha version by Richard Henderson <rth@tamu.edu>.
++
++ The GNU C Library is free software; you can redistribute it and/or
++ modify it under the terms of the GNU Lesser General Public License as
++ published by the Free Software Foundation; either version 2.1 of the
++ License, or (at your option) any later version.
++
++ The GNU C Library is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ Lesser General Public License for more details.
++
++ You should have received a copy of the GNU Lesser General Public
++ License along with the GNU C Library; see the file COPYING.LIB. If
++ not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
++
++#ifndef _PT_MACHINE_H
++#define _PT_MACHINE_H 1
++
++#include <features.h>
++
++/*
++ * XXX try to make this inline
++ */
++extern long int testandset (int *spinlock);
++
++#ifndef PT_EI
++#define PT_EI
++#else
++/* Spinlock implementation; required. */
++
++/*
++ * testandset() is the basis for the pthread spin lock.
++ *
++ * This implementation only requires that we 'set' the state of *spinlock. As
++ * bset is allows us to atomically 'testandset' a single bit define our 'set' is
++ * such that we will set bit 0 (ignoring all other bits, which should also be
++ * zero).
++ * Return value of 1 implies that the bit was already set and is still
++ * set.
++ * Return value of 0 implies that the bit was not previously set but it
++ * now is.
++ */
++long int
++testandset (int *spinlock)
++{
++ int ret;
++ __asm__ volatile (
++ " move.4 %0, #0 \n\t" /* Assume that the bit is not currently set */
++ " bset %1, %1, #0 \n\t" /* Attempt to 'set' bit 0 */
++ " jmpeq.t 1f \n\t"
++ " move.4 %0, #1 \n\t" /* Bit was already set, so return 1 */
++ " 1: \n\t"
++ : "=r"(ret), "+U4"(*spinlock)
++ :
++ : "memory", "cc"
++ );
++ return ret;
++}
++#endif
++#endif /* pt-machine.h */
+--- /dev/null
++++ b/libpthread/linuxthreads.old/sysdeps/ubicom32/tls.h
+@@ -0,0 +1,26 @@
++/* Definitions for thread-local data handling. linuxthreads/MIPS version.
++ Copyright (C) 2005 Free Software Foundation, Inc.
++ This file is part of the GNU C Library.
++
++ The GNU C Library is free software; you can redistribute it and/or
++ modify it under the terms of the GNU Lesser General Public
++ License as published by the Free Software Foundation; either
++ version 2.1 of the License, or (at your option) any later version.
++
++ The GNU C Library is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ Lesser General Public License for more details.
++
++ You should have received a copy of the GNU Lesser General Public
++ License along with the GNU C Library; if not, write to the Free
++ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
++ 02111-1307 USA. */
++
++#ifndef _TLS_H
++#define _TLS_H
++#ifdef HAVE_TLS_SUPPORT
++#warning no tls support
++#undef USE_TLS
++#endif
++#endif /* tls.h */
+--- /dev/null
++++ b/libc/sysdeps/linux/ubicom32/sys/user.h
+@@ -0,0 +1,40 @@
++/* Copyright (C) 1998 Free Software Foundation, Inc.
++ This file is part of the GNU C Library.
++
++ The GNU C Library is free software; you can redistribute it and/or
++ modify it under the terms of the GNU Lesser General Public
++ License as published by the Free Software Foundation; either
++ version 2.1 of the License, or (at your option) any later version.
++
++ The GNU C Library is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ Lesser General Public License for more details.
++
++ You should have received a copy of the GNU Lesser General Public
++ License along with the GNU C Library; if not, write to the Free
++ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
++ 02111-1307 USA. */
++
++#ifndef _SYS_USER_H
++#define _SYS_USER_H 1
++
++#include <features.h>
++
++#include <asm/ptrace.h>
++
++struct user {
++ struct pt_regs regs; /* entire machine state */
++ size_t u_tsize; /* text size (pages) */
++ size_t u_dsize; /* data size (pages) */
++ size_t u_ssize; /* stack size (pages) */
++ unsigned long start_code; /* text starting address */
++ unsigned long start_data; /* data starting address */
++ unsigned long start_stack; /* stack starting address */
++ long int signal; /* signal causing core dump */
++ struct regs * u_ar0; /* help gdb find registers */
++ unsigned long magic; /* identifies a core file */
++ char u_comm[32]; /* user command name */
++};
++
++#endif /* _SYS_USER_H */
projects / openwrt / staging / luka.git / commitdiff