This commit adds support for the TP-link Archer C2 V3 (AC900).
Specifications:
- CPU: QCA9563 750Mhz
- Ram: 64MB (DDR2)
- Flash: 8MB (SPI NOR)
- Ethernet: 5x 10/100/1000
- Wifi: QCA9563 bgn + QCA9887 an+ac
- 9x Leds, 2x buttons
Flash instructions:
Upload openwrt-ath79-generic-tplink_archer-c2-v3-squashfs-factory.bin
via the router Web interface and flash as normal firmware update.
Signed-off-by: Skirmantas Lauzikas <skirmantas.lauzikas@blackraven.lt>
[reorder entries, fix trailing whitespace in dts, add firmware partition
compatible string, remove led default off states, use default on state
for system led, reuse tplink-safeloader-uimage image build recipe, squash
with dynamic partitioning commit, reword commit message, add
installation instructions]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x10"
ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x20"
;;
+tplink,archer-c2-v3|\
+tplink,tl-wr1043nd-v4)
+ ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x20"
+ ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
+ ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
+ ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04"
+ ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
+ ;;
tplink,archer-c58-v1|\
tplink,archer-c59-v1)
ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x1E"
tplink,tl-mr3040-v2)
ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
;;
-tplink,tl-wr1043nd-v4)
- ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x20"
- ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
- ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
- ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04"
- ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
- ;;
tplink,tl-wr740n-v1|\
tplink,tl-wr740n-v3|\
tplink,tl-wr741-v1|\
dlink,dir-825-c1|\
dlink,dir-835-a1|\
dlink,dir-859-a1|\
+ tplink,archer-c2-v3|\
tplink,tl-wr1043nd-v4)
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
ath10kcal_extract "ART" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
;;
+ tplink,archer-c2-v3)
+ ath10kcal_extract "ART" 20480 2116
+ ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
+ ;;
tplink,archer-c7-v2)
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -1)
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca956x.dtsi"
+
+/ {
+ compatible = "tplink,archer-c2-v3", "qca,qca9563";
+ model = "TP-Link Archer C2 Version 3";
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ aliases {
+ led-boot = &system;
+ led-failsafe = &system;
+ led-running = &system;
+ led-upgrade = &system;
+ };
+
+ gpio_leds: leds {
+ compatible = "gpio-leds";
+
+ system: system {
+ label = "tp-link:green:system";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wifi2g {
+ label = "tp-link:green:wifi2g";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wifi5g {
+ label = "tp-link:green:wifi5g";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wifi_wps {
+ label = "tp-link:green:wps";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "tp-link:green:wan";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_fail {
+ label = "tp-link:orange:wan";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ lan1 {
+ label = "tp-link:green:lan1";
+ gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2 {
+ label = "tp-link:green:lan2";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ lan3 {
+ label = "tp-link:green:lan3";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ lan4 {
+ label = "tp-link:green:lan4";
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "WPS button";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+ num-cs = <1>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "factory-uboot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "uboot";
+ reg = <0x020000 0x10000>;
+ };
+
+ partition@30000 {
+ label = "firmware";
+ reg = <0x030000 0x7A0000>;
+ compatible = "denx,uimage";
+ };
+
+ info: partition@7e0000 {
+ label = "product-info";
+ reg = <0x7e0000 0x010000>;
+ read-only;
+ };
+
+ art: partition@7f0000 {
+ label = "ART";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&gpio {
+ status = "okay";
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0>;
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "sgmii";
+
+ qca,ar8327-initvals = <
+ 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&info 0x8>;
+ phy-mode = "sgmii";
+ phy-handle = <&phy0>;
+};
+
+&wmac {
+ status = "okay";
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&info 0x8>;
+};
endef
TARGET_DEVICES += tplink_archer-a7-v5
+define Device/tplink_archer-c2-v3
+ $(Device/tplink-safeloader-uimage)
+ ATH_SOC := qca9563
+ IMAGE_SIZE := 7808k
+ DEVICE_TITLE := TP-LINK Archer C2 v3
+ DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct
+ TPLINK_BOARD_ID := ARCHER-C2-V3
+endef
+TARGET_DEVICES += tplink_archer-c2-v3
+
define Device/tplink_archer-c58-v1
$(Device/tplink-safeloader-uimage)
ATH_SOC := qca9561
.last_sysupgrade_partition = "file-system",
},
+ /** Firmware layout for the C2v3 */
+ {
+ .id = "ARCHER-C2-V3",
+ .support_list =
+ "SupportList:\n"
+ "{product_name:ArcherC2,product_ver:3.0.0,special_id:00000000}\n"
+ "{product_name:ArcherC2,product_ver:3.0.0,special_id:55530000}\n"
+ "{product_name:ArcherC2,product_ver:3.0.0,special_id:45550000}\n",
+ .support_trail = '\x00',
+ .soft_ver = "soft_ver:3.0.1\n",
+
+ /** We're using a dynamic kernel/rootfs split here */
+
+ .partitions = {
+ {"factory-boot", 0x00000, 0x20000},
+ {"fs-uboot", 0x20000, 0x10000},
+ {"firmware", 0x30000, 0x7a0000},
+ {"user-config", 0x7d0000, 0x04000},
+ {"default-mac", 0x7e0000, 0x00100},
+ {"device-id", 0x7e0100, 0x00100},
+ {"extra-para", 0x7e0200, 0x00100},
+ {"pin", 0x7e0300, 0x00100},
+ {"support-list", 0x7e0400, 0x00400},
+ {"soft-version", 0x7e0800, 0x00400},
+ {"product-info", 0x7e0c00, 0x01400},
+ {"partition-table", 0x7e2000, 0x01000},
+ {"profile", 0x7e3000, 0x01000},
+ {"default-config", 0x7e4000, 0x04000},
+ {"merge-config", 0x7ec000, 0x02000},
+ {"qos-db", 0x7ee000, 0x02000},
+ {"radio", 0x7f0000, 0x10000},
+ {NULL, 0, 0}
+ },
+
+ .first_sysupgrade_partition = "os-image",
+ .last_sysupgrade_partition = "file-system",
+ },
+
/** Firmware layout for the C25v1 */
{
.id = "ARCHER-C25-V1",