+++ /dev/null
-/*
- * Copyright (c) 2013 Xilinx Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _ZYNQ_CLK_H_
-#define _ZYNQ_CLK_H_
-
-enum zynq_clk {
- armpll_clk, ddrpll_clk, iopll_clk,
- cpu_6or4x_clk, cpu_3or2x_clk, cpu_2x_clk, cpu_1x_clk,
- ddr2x_clk, ddr3x_clk, dci_clk,
- lqspi_clk, smc_clk, pcap_clk, gem0_clk, gem1_clk,
- fclk0_clk, fclk1_clk, fclk2_clk, fclk3_clk, can0_clk, can1_clk,
- sdio0_clk, sdio1_clk, uart0_clk, uart1_clk, spi0_clk, spi1_clk, dma_clk,
- usb0_aper_clk, usb1_aper_clk, gem0_aper_clk, gem1_aper_clk,
- sdio0_aper_clk, sdio1_aper_clk, spi0_aper_clk, spi1_aper_clk,
- can0_aper_clk, can1_aper_clk, i2c0_aper_clk, i2c1_aper_clk,
- uart0_aper_clk, uart1_aper_clk, gpio_aper_clk, lqspi_aper_clk,
- smc_aper_clk, swdt_clk, dbg_trc_clk, dbg_apb_clk, clk_max};
-
-void zynq_clk_early_init(void);
-int zynq_clk_set_rate(enum zynq_clk clk, unsigned long rate);
-unsigned long zynq_clk_get_rate(enum zynq_clk clk);
-const char *zynq_clk_get_name(enum zynq_clk clk);
-unsigned long get_uart_clk(int dev_id);
-
-#endif
+++ /dev/null
-/*
- * Copyright (c) 2013 Xilinx, Inc.
- * Copyright (c) 2015 DAVE Embedded Systems
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _ZYNQ_GPIO_H
-#define _ZYNQ_GPIO_H
-
-#define ZYNQ_GPIO_BASE_ADDRESS 0xE000A000
-
-/* Maximum banks */
-#define ZYNQ_GPIO_MAX_BANK 4
-
-#define ZYNQ_GPIO_BANK0_NGPIO 32
-#define ZYNQ_GPIO_BANK1_NGPIO 22
-#define ZYNQ_GPIO_BANK2_NGPIO 32
-#define ZYNQ_GPIO_BANK3_NGPIO 32
-
-#define ZYNQ_GPIO_NR_GPIOS (ZYNQ_GPIO_BANK0_NGPIO + \
- ZYNQ_GPIO_BANK1_NGPIO + \
- ZYNQ_GPIO_BANK2_NGPIO + \
- ZYNQ_GPIO_BANK3_NGPIO)
-
-#define ZYNQ_GPIO_BANK0_PIN_MIN 0
-#define ZYNQ_GPIO_BANK0_PIN_MAX (ZYNQ_GPIO_BANK0_PIN_MIN + \
- ZYNQ_GPIO_BANK0_NGPIO - 1)
-#define ZYNQ_GPIO_BANK1_PIN_MIN (ZYNQ_GPIO_BANK0_PIN_MAX + 1)
-#define ZYNQ_GPIO_BANK1_PIN_MAX (ZYNQ_GPIO_BANK1_PIN_MIN + \
- ZYNQ_GPIO_BANK1_NGPIO - 1)
-#define ZYNQ_GPIO_BANK2_PIN_MIN (ZYNQ_GPIO_BANK1_PIN_MAX + 1)
-#define ZYNQ_GPIO_BANK2_PIN_MAX (ZYNQ_GPIO_BANK2_PIN_MIN + \
- ZYNQ_GPIO_BANK2_NGPIO - 1)
-#define ZYNQ_GPIO_BANK3_PIN_MIN (ZYNQ_GPIO_BANK2_PIN_MAX + 1)
-#define ZYNQ_GPIO_BANK3_PIN_MAX (ZYNQ_GPIO_BANK3_PIN_MIN + \
- ZYNQ_GPIO_BANK3_NGPIO - 1)
-
-/* Register offsets for the GPIO device */
-/* LSW Mask & Data -WO */
-#define ZYNQ_GPIO_DATA_LSW_OFFSET(BANK) (0x000 + (8 * BANK))
-/* MSW Mask & Data -WO */
-#define ZYNQ_GPIO_DATA_MSW_OFFSET(BANK) (0x004 + (8 * BANK))
-/* Data Register-RW */
-#define ZYNQ_GPIO_DATA_RO_OFFSET(BANK) (0x060 + (4 * BANK))
-/* Direction mode reg-RW */
-#define ZYNQ_GPIO_DIRM_OFFSET(BANK) (0x204 + (0x40 * BANK))
-/* Output enable reg-RW */
-#define ZYNQ_GPIO_OUTEN_OFFSET(BANK) (0x208 + (0x40 * BANK))
-/* Interrupt mask reg-RO */
-#define ZYNQ_GPIO_INTMASK_OFFSET(BANK) (0x20C + (0x40 * BANK))
-/* Interrupt enable reg-WO */
-#define ZYNQ_GPIO_INTEN_OFFSET(BANK) (0x210 + (0x40 * BANK))
-/* Interrupt disable reg-WO */
-#define ZYNQ_GPIO_INTDIS_OFFSET(BANK) (0x214 + (0x40 * BANK))
-/* Interrupt status reg-RO */
-#define ZYNQ_GPIO_INTSTS_OFFSET(BANK) (0x218 + (0x40 * BANK))
-/* Interrupt type reg-RW */
-#define ZYNQ_GPIO_INTTYPE_OFFSET(BANK) (0x21C + (0x40 * BANK))
-/* Interrupt polarity reg-RW */
-#define ZYNQ_GPIO_INTPOL_OFFSET(BANK) (0x220 + (0x40 * BANK))
-/* Interrupt on any, reg-RW */
-#define ZYNQ_GPIO_INTANY_OFFSET(BANK) (0x224 + (0x40 * BANK))
-
-/* Disable all interrupts mask */
-#define ZYNQ_GPIO_IXR_DISABLE_ALL 0xFFFFFFFF
-
-/* Mid pin number of a bank */
-#define ZYNQ_GPIO_MID_PIN_NUM 16
-
-/* GPIO upper 16 bit mask */
-#define ZYNQ_GPIO_UPPER_MASK 0xFFFF0000
-
-#define BIT(x) (1<<x)
-
-#endif /* _ZYNQ_GPIO_H */
+++ /dev/null
-/*
- * Copyright (c) 2013 Xilinx Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _ASM_ARCH_HARDWARE_H
-#define _ASM_ARCH_HARDWARE_H
-
-#define ZYNQ_SERIAL_BASEADDR0 0xE0000000
-#define ZYNQ_SERIAL_BASEADDR1 0xE0001000
-#define ZYNQ_SYS_CTRL_BASEADDR 0xF8000000
-#define ZYNQ_DEV_CFG_APB_BASEADDR 0xF8007000
-#define ZYNQ_SCU_BASEADDR 0xF8F00000
-#define ZYNQ_SCUTIMER_BASEADDR 0xF8F00600
-#define ZYNQ_GEM_BASEADDR0 0xE000B000
-#define ZYNQ_GEM_BASEADDR1 0xE000C000
-#define ZYNQ_SDHCI_BASEADDR0 0xE0100000
-#define ZYNQ_SDHCI_BASEADDR1 0xE0101000
-#define ZYNQ_I2C_BASEADDR0 0xE0004000
-#define ZYNQ_I2C_BASEADDR1 0xE0005000
-#define ZYNQ_SPI_BASEADDR0 0xE0006000
-#define ZYNQ_SPI_BASEADDR1 0xE0007000
-#define ZYNQ_QSPI_BASEADDR 0xE000D000
-#define ZYNQ_SMC_BASEADDR 0xE000E000
-#define ZYNQ_NAND_BASEADDR 0xE1000000
-#define ZYNQ_DDRC_BASEADDR 0xF8006000
-#define ZYNQ_EFUSE_BASEADDR 0xF800D000
-#define ZYNQ_USB_BASEADDR0 0xE0002000
-#define ZYNQ_USB_BASEADDR1 0xE0003000
-
-/* Bootmode setting values */
-#define ZYNQ_BM_MASK 0x7
-#define ZYNQ_BM_QSPI 0x1
-#define ZYNQ_BM_NOR 0x2
-#define ZYNQ_BM_NAND 0x4
-#define ZYNQ_BM_SD 0x5
-#define ZYNQ_BM_JTAG 0x0
-
-/* Reflect slcr offsets */
-struct slcr_regs {
- u32 scl; /* 0x0 */
- u32 slcr_lock; /* 0x4 */
- u32 slcr_unlock; /* 0x8 */
- u32 reserved0_1[61];
- u32 arm_pll_ctrl; /* 0x100 */
- u32 ddr_pll_ctrl; /* 0x104 */
- u32 io_pll_ctrl; /* 0x108 */
- u32 reserved0_2[5];
- u32 arm_clk_ctrl; /* 0x120 */
- u32 ddr_clk_ctrl; /* 0x124 */
- u32 dci_clk_ctrl; /* 0x128 */
- u32 aper_clk_ctrl; /* 0x12c */
- u32 reserved0_3[2];
- u32 gem0_rclk_ctrl; /* 0x138 */
- u32 gem1_rclk_ctrl; /* 0x13c */
- u32 gem0_clk_ctrl; /* 0x140 */
- u32 gem1_clk_ctrl; /* 0x144 */
- u32 smc_clk_ctrl; /* 0x148 */
- u32 lqspi_clk_ctrl; /* 0x14c */
- u32 sdio_clk_ctrl; /* 0x150 */
- u32 uart_clk_ctrl; /* 0x154 */
- u32 spi_clk_ctrl; /* 0x158 */
- u32 can_clk_ctrl; /* 0x15c */
- u32 can_mioclk_ctrl; /* 0x160 */
- u32 dbg_clk_ctrl; /* 0x164 */
- u32 pcap_clk_ctrl; /* 0x168 */
- u32 reserved0_4[1];
- u32 fpga0_clk_ctrl; /* 0x170 */
- u32 reserved0_5[3];
- u32 fpga1_clk_ctrl; /* 0x180 */
- u32 reserved0_6[3];
- u32 fpga2_clk_ctrl; /* 0x190 */
- u32 reserved0_7[3];
- u32 fpga3_clk_ctrl; /* 0x1a0 */
- u32 reserved0_8[8];
- u32 clk_621_true; /* 0x1c4 */
- u32 reserved1[14];
- u32 pss_rst_ctrl; /* 0x200 */
- u32 reserved2[15];
- u32 fpga_rst_ctrl; /* 0x240 */
- u32 reserved3[5];
- u32 reboot_status; /* 0x258 */
- u32 boot_mode; /* 0x25c */
- u32 reserved4[116];
- u32 trust_zone; /* 0x430 */ /* FIXME */
- u32 reserved5_1[63];
- u32 pss_idcode; /* 0x530 */
- u32 reserved5_2[51];
- u32 ddr_urgent; /* 0x600 */
- u32 reserved6[6];
- u32 ddr_urgent_sel; /* 0x61c */
- u32 reserved7[56];
- u32 mio_pin[54]; /* 0x700 - 0x7D4 */
- u32 reserved8[74];
- u32 lvl_shftr_en; /* 0x900 */
- u32 reserved9[3];
- u32 ocm_cfg; /* 0x910 */
-};
-
-#define slcr_base ((struct slcr_regs *)ZYNQ_SYS_CTRL_BASEADDR)
-
-struct devcfg_regs {
- u32 ctrl; /* 0x0 */
- u32 lock; /* 0x4 */
- u32 cfg; /* 0x8 */
- u32 int_sts; /* 0xc */
- u32 int_mask; /* 0x10 */
- u32 status; /* 0x14 */
- u32 dma_src_addr; /* 0x18 */
- u32 dma_dst_addr; /* 0x1c */
- u32 dma_src_len; /* 0x20 */
- u32 dma_dst_len; /* 0x24 */
- u32 rom_shadow; /* 0x28 */
- u32 reserved1[2];
- u32 unlock; /* 0x34 */
- u32 reserved2[18];
- u32 mctrl; /* 0x80 */
- u32 reserved3;
- u32 write_count; /* 0x88 */
- u32 read_count; /* 0x8c */
-};
-
-#define devcfg_base ((struct devcfg_regs *)ZYNQ_DEV_CFG_APB_BASEADDR)
-
-struct scu_regs {
- u32 reserved1[16];
- u32 filter_start; /* 0x40 */
- u32 filter_end; /* 0x44 */
-};
-
-#define scu_base ((struct scu_regs *)ZYNQ_SCU_BASEADDR)
-
-struct ddrc_regs {
- u32 ddrc_ctrl; /* 0x0 */
- u32 reserved[60];
- u32 ecc_scrub; /* 0xF4 */
-};
-#define ddrc_base ((struct ddrc_regs *)ZYNQ_DDRC_BASEADDR)
-
-struct efuse_reg {
- u32 reserved1[4];
- u32 status;
- u32 reserved2[3];
-};
-
-#define efuse_base ((struct efuse_reg *)ZYNQ_EFUSE_BASEADDR)
-
-#endif /* _ASM_ARCH_HARDWARE_H */
+++ /dev/null
-/*
- * Copyright (c) 2013 Xilinx Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _SYS_PROTO_H_
-#define _SYS_PROTO_H_
-
-extern void zynq_slcr_lock(void);
-extern void zynq_slcr_unlock(void);
-extern void zynq_slcr_cpu_reset(void);
-extern void zynq_slcr_gem_clk_setup(u32 gem_id, unsigned long clk_rate);
-extern void zynq_slcr_devcfg_disable(void);
-extern void zynq_slcr_devcfg_enable(void);
-extern u32 zynq_slcr_get_boot_mode(void);
-extern u32 zynq_slcr_get_idcode(void);
-extern int zynq_slcr_get_mio_pin_status(const char *periph);
-extern void zynq_ddrc_init(void);
-extern unsigned int zynq_get_silicon_version(void);
-
-/* Driver extern functions */
-extern int zynq_sdhci_init(phys_addr_t regbase);
-extern int zynq_sdhci_of_init(const void *blob);
-
-extern void ps7_init(void);
-
-#endif /* _SYS_PROTO_H_ */
--- /dev/null
+/*
+ * Copyright (c) 2013 Xilinx Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _ZYNQ_CLK_H_
+#define _ZYNQ_CLK_H_
+
+enum zynq_clk {
+ armpll_clk, ddrpll_clk, iopll_clk,
+ cpu_6or4x_clk, cpu_3or2x_clk, cpu_2x_clk, cpu_1x_clk,
+ ddr2x_clk, ddr3x_clk, dci_clk,
+ lqspi_clk, smc_clk, pcap_clk, gem0_clk, gem1_clk,
+ fclk0_clk, fclk1_clk, fclk2_clk, fclk3_clk, can0_clk, can1_clk,
+ sdio0_clk, sdio1_clk, uart0_clk, uart1_clk, spi0_clk, spi1_clk, dma_clk,
+ usb0_aper_clk, usb1_aper_clk, gem0_aper_clk, gem1_aper_clk,
+ sdio0_aper_clk, sdio1_aper_clk, spi0_aper_clk, spi1_aper_clk,
+ can0_aper_clk, can1_aper_clk, i2c0_aper_clk, i2c1_aper_clk,
+ uart0_aper_clk, uart1_aper_clk, gpio_aper_clk, lqspi_aper_clk,
+ smc_aper_clk, swdt_clk, dbg_trc_clk, dbg_apb_clk, clk_max};
+
+void zynq_clk_early_init(void);
+int zynq_clk_set_rate(enum zynq_clk clk, unsigned long rate);
+unsigned long zynq_clk_get_rate(enum zynq_clk clk);
+const char *zynq_clk_get_name(enum zynq_clk clk);
+unsigned long get_uart_clk(int dev_id);
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2013 Xilinx, Inc.
+ * Copyright (c) 2015 DAVE Embedded Systems
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _ZYNQ_GPIO_H
+#define _ZYNQ_GPIO_H
+
+#define ZYNQ_GPIO_BASE_ADDRESS 0xE000A000
+
+/* Maximum banks */
+#define ZYNQ_GPIO_MAX_BANK 4
+
+#define ZYNQ_GPIO_BANK0_NGPIO 32
+#define ZYNQ_GPIO_BANK1_NGPIO 22
+#define ZYNQ_GPIO_BANK2_NGPIO 32
+#define ZYNQ_GPIO_BANK3_NGPIO 32
+
+#define ZYNQ_GPIO_NR_GPIOS (ZYNQ_GPIO_BANK0_NGPIO + \
+ ZYNQ_GPIO_BANK1_NGPIO + \
+ ZYNQ_GPIO_BANK2_NGPIO + \
+ ZYNQ_GPIO_BANK3_NGPIO)
+
+#define ZYNQ_GPIO_BANK0_PIN_MIN 0
+#define ZYNQ_GPIO_BANK0_PIN_MAX (ZYNQ_GPIO_BANK0_PIN_MIN + \
+ ZYNQ_GPIO_BANK0_NGPIO - 1)
+#define ZYNQ_GPIO_BANK1_PIN_MIN (ZYNQ_GPIO_BANK0_PIN_MAX + 1)
+#define ZYNQ_GPIO_BANK1_PIN_MAX (ZYNQ_GPIO_BANK1_PIN_MIN + \
+ ZYNQ_GPIO_BANK1_NGPIO - 1)
+#define ZYNQ_GPIO_BANK2_PIN_MIN (ZYNQ_GPIO_BANK1_PIN_MAX + 1)
+#define ZYNQ_GPIO_BANK2_PIN_MAX (ZYNQ_GPIO_BANK2_PIN_MIN + \
+ ZYNQ_GPIO_BANK2_NGPIO - 1)
+#define ZYNQ_GPIO_BANK3_PIN_MIN (ZYNQ_GPIO_BANK2_PIN_MAX + 1)
+#define ZYNQ_GPIO_BANK3_PIN_MAX (ZYNQ_GPIO_BANK3_PIN_MIN + \
+ ZYNQ_GPIO_BANK3_NGPIO - 1)
+
+/* Register offsets for the GPIO device */
+/* LSW Mask & Data -WO */
+#define ZYNQ_GPIO_DATA_LSW_OFFSET(BANK) (0x000 + (8 * BANK))
+/* MSW Mask & Data -WO */
+#define ZYNQ_GPIO_DATA_MSW_OFFSET(BANK) (0x004 + (8 * BANK))
+/* Data Register-RW */
+#define ZYNQ_GPIO_DATA_RO_OFFSET(BANK) (0x060 + (4 * BANK))
+/* Direction mode reg-RW */
+#define ZYNQ_GPIO_DIRM_OFFSET(BANK) (0x204 + (0x40 * BANK))
+/* Output enable reg-RW */
+#define ZYNQ_GPIO_OUTEN_OFFSET(BANK) (0x208 + (0x40 * BANK))
+/* Interrupt mask reg-RO */
+#define ZYNQ_GPIO_INTMASK_OFFSET(BANK) (0x20C + (0x40 * BANK))
+/* Interrupt enable reg-WO */
+#define ZYNQ_GPIO_INTEN_OFFSET(BANK) (0x210 + (0x40 * BANK))
+/* Interrupt disable reg-WO */
+#define ZYNQ_GPIO_INTDIS_OFFSET(BANK) (0x214 + (0x40 * BANK))
+/* Interrupt status reg-RO */
+#define ZYNQ_GPIO_INTSTS_OFFSET(BANK) (0x218 + (0x40 * BANK))
+/* Interrupt type reg-RW */
+#define ZYNQ_GPIO_INTTYPE_OFFSET(BANK) (0x21C + (0x40 * BANK))
+/* Interrupt polarity reg-RW */
+#define ZYNQ_GPIO_INTPOL_OFFSET(BANK) (0x220 + (0x40 * BANK))
+/* Interrupt on any, reg-RW */
+#define ZYNQ_GPIO_INTANY_OFFSET(BANK) (0x224 + (0x40 * BANK))
+
+/* Disable all interrupts mask */
+#define ZYNQ_GPIO_IXR_DISABLE_ALL 0xFFFFFFFF
+
+/* Mid pin number of a bank */
+#define ZYNQ_GPIO_MID_PIN_NUM 16
+
+/* GPIO upper 16 bit mask */
+#define ZYNQ_GPIO_UPPER_MASK 0xFFFF0000
+
+#define BIT(x) (1<<x)
+
+#endif /* _ZYNQ_GPIO_H */
--- /dev/null
+/*
+ * Copyright (c) 2013 Xilinx Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _ASM_ARCH_HARDWARE_H
+#define _ASM_ARCH_HARDWARE_H
+
+#define ZYNQ_SERIAL_BASEADDR0 0xE0000000
+#define ZYNQ_SERIAL_BASEADDR1 0xE0001000
+#define ZYNQ_SYS_CTRL_BASEADDR 0xF8000000
+#define ZYNQ_DEV_CFG_APB_BASEADDR 0xF8007000
+#define ZYNQ_SCU_BASEADDR 0xF8F00000
+#define ZYNQ_SCUTIMER_BASEADDR 0xF8F00600
+#define ZYNQ_GEM_BASEADDR0 0xE000B000
+#define ZYNQ_GEM_BASEADDR1 0xE000C000
+#define ZYNQ_SDHCI_BASEADDR0 0xE0100000
+#define ZYNQ_SDHCI_BASEADDR1 0xE0101000
+#define ZYNQ_I2C_BASEADDR0 0xE0004000
+#define ZYNQ_I2C_BASEADDR1 0xE0005000
+#define ZYNQ_SPI_BASEADDR0 0xE0006000
+#define ZYNQ_SPI_BASEADDR1 0xE0007000
+#define ZYNQ_QSPI_BASEADDR 0xE000D000
+#define ZYNQ_SMC_BASEADDR 0xE000E000
+#define ZYNQ_NAND_BASEADDR 0xE1000000
+#define ZYNQ_DDRC_BASEADDR 0xF8006000
+#define ZYNQ_EFUSE_BASEADDR 0xF800D000
+#define ZYNQ_USB_BASEADDR0 0xE0002000
+#define ZYNQ_USB_BASEADDR1 0xE0003000
+
+/* Bootmode setting values */
+#define ZYNQ_BM_MASK 0x7
+#define ZYNQ_BM_QSPI 0x1
+#define ZYNQ_BM_NOR 0x2
+#define ZYNQ_BM_NAND 0x4
+#define ZYNQ_BM_SD 0x5
+#define ZYNQ_BM_JTAG 0x0
+
+/* Reflect slcr offsets */
+struct slcr_regs {
+ u32 scl; /* 0x0 */
+ u32 slcr_lock; /* 0x4 */
+ u32 slcr_unlock; /* 0x8 */
+ u32 reserved0_1[61];
+ u32 arm_pll_ctrl; /* 0x100 */
+ u32 ddr_pll_ctrl; /* 0x104 */
+ u32 io_pll_ctrl; /* 0x108 */
+ u32 reserved0_2[5];
+ u32 arm_clk_ctrl; /* 0x120 */
+ u32 ddr_clk_ctrl; /* 0x124 */
+ u32 dci_clk_ctrl; /* 0x128 */
+ u32 aper_clk_ctrl; /* 0x12c */
+ u32 reserved0_3[2];
+ u32 gem0_rclk_ctrl; /* 0x138 */
+ u32 gem1_rclk_ctrl; /* 0x13c */
+ u32 gem0_clk_ctrl; /* 0x140 */
+ u32 gem1_clk_ctrl; /* 0x144 */
+ u32 smc_clk_ctrl; /* 0x148 */
+ u32 lqspi_clk_ctrl; /* 0x14c */
+ u32 sdio_clk_ctrl; /* 0x150 */
+ u32 uart_clk_ctrl; /* 0x154 */
+ u32 spi_clk_ctrl; /* 0x158 */
+ u32 can_clk_ctrl; /* 0x15c */
+ u32 can_mioclk_ctrl; /* 0x160 */
+ u32 dbg_clk_ctrl; /* 0x164 */
+ u32 pcap_clk_ctrl; /* 0x168 */
+ u32 reserved0_4[1];
+ u32 fpga0_clk_ctrl; /* 0x170 */
+ u32 reserved0_5[3];
+ u32 fpga1_clk_ctrl; /* 0x180 */
+ u32 reserved0_6[3];
+ u32 fpga2_clk_ctrl; /* 0x190 */
+ u32 reserved0_7[3];
+ u32 fpga3_clk_ctrl; /* 0x1a0 */
+ u32 reserved0_8[8];
+ u32 clk_621_true; /* 0x1c4 */
+ u32 reserved1[14];
+ u32 pss_rst_ctrl; /* 0x200 */
+ u32 reserved2[15];
+ u32 fpga_rst_ctrl; /* 0x240 */
+ u32 reserved3[5];
+ u32 reboot_status; /* 0x258 */
+ u32 boot_mode; /* 0x25c */
+ u32 reserved4[116];
+ u32 trust_zone; /* 0x430 */ /* FIXME */
+ u32 reserved5_1[63];
+ u32 pss_idcode; /* 0x530 */
+ u32 reserved5_2[51];
+ u32 ddr_urgent; /* 0x600 */
+ u32 reserved6[6];
+ u32 ddr_urgent_sel; /* 0x61c */
+ u32 reserved7[56];
+ u32 mio_pin[54]; /* 0x700 - 0x7D4 */
+ u32 reserved8[74];
+ u32 lvl_shftr_en; /* 0x900 */
+ u32 reserved9[3];
+ u32 ocm_cfg; /* 0x910 */
+};
+
+#define slcr_base ((struct slcr_regs *)ZYNQ_SYS_CTRL_BASEADDR)
+
+struct devcfg_regs {
+ u32 ctrl; /* 0x0 */
+ u32 lock; /* 0x4 */
+ u32 cfg; /* 0x8 */
+ u32 int_sts; /* 0xc */
+ u32 int_mask; /* 0x10 */
+ u32 status; /* 0x14 */
+ u32 dma_src_addr; /* 0x18 */
+ u32 dma_dst_addr; /* 0x1c */
+ u32 dma_src_len; /* 0x20 */
+ u32 dma_dst_len; /* 0x24 */
+ u32 rom_shadow; /* 0x28 */
+ u32 reserved1[2];
+ u32 unlock; /* 0x34 */
+ u32 reserved2[18];
+ u32 mctrl; /* 0x80 */
+ u32 reserved3;
+ u32 write_count; /* 0x88 */
+ u32 read_count; /* 0x8c */
+};
+
+#define devcfg_base ((struct devcfg_regs *)ZYNQ_DEV_CFG_APB_BASEADDR)
+
+struct scu_regs {
+ u32 reserved1[16];
+ u32 filter_start; /* 0x40 */
+ u32 filter_end; /* 0x44 */
+};
+
+#define scu_base ((struct scu_regs *)ZYNQ_SCU_BASEADDR)
+
+struct ddrc_regs {
+ u32 ddrc_ctrl; /* 0x0 */
+ u32 reserved[60];
+ u32 ecc_scrub; /* 0xF4 */
+};
+#define ddrc_base ((struct ddrc_regs *)ZYNQ_DDRC_BASEADDR)
+
+struct efuse_reg {
+ u32 reserved1[4];
+ u32 status;
+ u32 reserved2[3];
+};
+
+#define efuse_base ((struct efuse_reg *)ZYNQ_EFUSE_BASEADDR)
+
+#endif /* _ASM_ARCH_HARDWARE_H */
--- /dev/null
+/*
+ * Copyright (c) 2013 Xilinx Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _SYS_PROTO_H_
+#define _SYS_PROTO_H_
+
+extern void zynq_slcr_lock(void);
+extern void zynq_slcr_unlock(void);
+extern void zynq_slcr_cpu_reset(void);
+extern void zynq_slcr_gem_clk_setup(u32 gem_id, unsigned long clk_rate);
+extern void zynq_slcr_devcfg_disable(void);
+extern void zynq_slcr_devcfg_enable(void);
+extern u32 zynq_slcr_get_boot_mode(void);
+extern u32 zynq_slcr_get_idcode(void);
+extern int zynq_slcr_get_mio_pin_status(const char *periph);
+extern void zynq_ddrc_init(void);
+extern unsigned int zynq_get_silicon_version(void);
+
+/* Driver extern functions */
+extern int zynq_sdhci_init(phys_addr_t regbase);
+extern int zynq_sdhci_of_init(const void *blob);
+
+extern void ps7_init(void);
+
+#endif /* _SYS_PROTO_H_ */
projects / project / bcm63xx / u-boot.git / commitdiff