--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9344.dtsi"
+
+/ {
+ compatible = "netgear,wndr4300", "qca,ar9344";
+ model = "Netgear WNDR4300";
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ aliases {
+ led-boot = &power_amber;
+ led-failsafe = &power_amber;
+ led-running = &power_green;
+ led-upgrade = &power_amber;
+ label-mac-device = ð0;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+ };
+
+ rfkill {
+ label = "rfkill";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&enable_gpio_11>;
+
+ power_green: power_green {
+ label = "netgear:green:power";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ power_amber: power_amber {
+ label = "netgear:amber:power";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+
+ wan_green {
+ label = "netgear:green:wan";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_amber {
+ label = "netgear:amber:wan";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan2g_green {
+ label = "netgear:green:wlan2g";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wlan5g_blue {
+ label = "netgear:blue:wlan5g";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wps_green {
+ label = "netgear:green:wps";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ wps_amber {
+ label = "netgear:amber:wps";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+
+ usb_green {
+ label = "netgear:green:usb";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&hub_port>;
+ linux,default-trigger = "usbport";
+ };
+ };
+};
+
+&pinmux {
+ enable_gpio_11: pinmux_enable_gpio_11 {
+ pinctrl-single,bits = <0x8 0x0 0xff000000>;
+ };
+};
+
+&nand {
+ status = "okay";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x40000 0x40000>;
+ };
+
+ art: partition@80000 {
+ label = "caldata";
+ reg = <0x80000 0x40000>;
+ read-only;
+ };
+
+ partition@c0000 {
+ label = "pot";
+ reg = <0xc0000 0x80000>;
+ };
+
+ partition@140000 {
+ label = "language";
+ reg = <0x140000 0x200000>;
+ };
+
+ partition@340000 {
+ label = "config";
+ reg = <0x340000 0x80000>;
+ };
+
+ partition@3c0000 {
+ label = "traffic_meter";
+ reg = <0x3c0000 0x300000>;
+ };
+
+ kernel@6c0000 {
+ label = "kernel";
+ reg = <0x6c0000 0x200000>;
+ };
+
+ ubi@8c0000 {
+ label = "ubi";
+ reg = <0x8c0000 0x1700000>;
+ };
+
+ partition@6c0000 {
+ label = "firmware";
+ reg = <0x6c0000 0x1900000>;
+ compatible = "netgear,uimage";
+ };
+
+ partition@1fc0000 {
+ label = "caldata_backup";
+ reg = <0x1fc0000 0x40000>;
+ read-only;
+ };
+
+ partition@2000000 {
+ label = "reserved";
+ reg = <0x2000000 0x6000000>;
+ read-only;
+ };
+ };
+};
+
+&ref {
+ clock-frequency = <40000000>;
+};
+
+&builtin_switch {
+ resets = <&rst 8>, <&rst 12>;
+ reset-names = "switch", "switch-analog";
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "rgmii";
+ qca,mib-poll-interval = <500>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x07600000
+ 0x0c 0x01000000
+ 0x10 0xc1000000
+ 0x50 0xcc35cc35
+ 0x54 0xcb37cb37
+ 0x58 0x00000000
+ 0x5c 0x00f3cf00
+ 0x7c 0x0000007e
+ 0x94 0x0000007e
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ /* default for ar934x, except for 1000M */
+ pll-data = <0x06000000 0x00000101 0x00001616>;
+
+ mtd-mac-address = <&art 0x0>;
+
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+};
+
+&gpio {
+ status = "okay";
+
+ lna0 {
+ gpio-hog;
+ line-name = "netgear:ext:lna0";
+ gpios = <18 GPIO_ACTIVE_HIGH>;
+ output-high;
+ };
+
+ lna1 {
+ gpio-hog;
+ line-name = "netgear:ext:lna1";
+ gpios = <19 GPIO_ACTIVE_HIGH>;
+ output-high;
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x0>;
+ qca,no-eeprom;
+};
+
+&pcie {
+ status = "okay";
+
+ ath9k: wifi@0,0 {
+ compatible = "pci168c,0033";
+ reg = <0x0000 0 0 0 0>;
+ mtd-mac-address = <&art 0xc>;
+ qca,no-eeprom;
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ usb_power {
+ gpio-hog;
+ line-name = "netgear:power:usb";
+ gpios = <0 GPIO_ACTIVE_HIGH>;
+ output-high;
+ };
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hub_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&uart {
+ status = "okay";
+};
+include ./common-netgear.mk # for netgear-uImage
+
# attention: only zlib compression is allowed for the boot fs
define Build/zyxel-buildkerneljffs
rm -rf $(KDIR_TMP)/zyxelnbg6716
endef
TARGET_DEVICES += glinet_gl-ar300m-nand
+# fake rootfs is mandatory, pad-offset 129 equals (2 * uimage_header + 0xff)
+define Device/netgear_ath79_nand
+ DEVICE_VENDOR := NETGEAR
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
+ KERNEL_SIZE := 2048k
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ IMAGE_SIZE := 25600k
+ KERNEL := kernel-bin | append-dtb | lzma -d20 | \
+ pad-offset $$(KERNEL_SIZE) 129 | \
+ netgear-uImage lzma | append-string -e '\xff' | \
+ append-uImage-fakehdr filesystem $$(NETGEAR_KERNEL_MAGIC)
+ KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma -d20 | netgear-uImage lzma
+ IMAGES := sysupgrade.bin factory.img
+ IMAGE/factory.img := append-kernel | append-ubi | netgear-dni | check-size $$$$(IMAGE_SIZE)
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata | check-size $$$$(IMAGE_SIZE)
+ UBINIZE_OPTS := -E 5
+endef
+
+define Device/netgear_wndr4300
+ ATH_SOC := ar9344
+ DEVICE_MODEL := WNDR4300
+ NETGEAR_KERNEL_MAGIC := 0x33373033
+ NETGEAR_BOARD_ID := WNDR4300
+ NETGEAR_HW_ID := 29763948+0+128+128+2x2+3x3
+ SUPPORTED_DEVICES += wndr4300
+ $(Device/netgear_ath79_nand)
+endef
+TARGET_DEVICES += netgear_wndr4300
+
define Device/zyxel_nbg6716
ATH_SOC := qca9558
DEVICE_VENDOR := ZyXEL
projects / openwrt / staging / zorun.git / commitdiff