ARM: dts: dra7x-evm: Don't use dcan1_rx.gpio1_15 in DCAN pinctrl
authorRoger Quadros <rogerq@ti.com>
Thu, 5 Mar 2015 13:32:42 +0000 (15:32 +0200)
committerTony Lindgren <tony@atomide.com>
Fri, 6 Mar 2015 17:22:27 +0000 (09:22 -0800)
Rev.F onwards ball G19 (dcan1_rx) is used as a GPIO for some other
function so don't include it in DCAN pinctrl node.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
arch/arm/boot/dts/dra7-evm.dts
arch/arm/boot/dts/dra72-evm.dts

index 3290a96ba586a7262c2eb5ce171655cbe7124d50..ddef593c380b0995529f0973dc30e5daa0c3912b 100644 (file)
        dcan1_pins_default: dcan1_pins_default {
                pinctrl-single,pins = <
                        0x3d0   (PIN_OUTPUT | MUX_MODE0) /* dcan1_tx */
-                       0x3d4   (MUX_MODE15)            /* dcan1_rx.off */
                        0x418   (PULL_DIS | MUX_MODE1) /* wakeup0.dcan1_rx */
                >;
        };
        dcan1_pins_sleep: dcan1_pins_sleep {
                pinctrl-single,pins = <
                        0x3d0   (MUX_MODE15)    /* dcan1_tx.off */
-                       0x3d4   (MUX_MODE15)    /* dcan1_rx.off */
                        0x418   (MUX_MODE15)    /* wakeup0.off */
                >;
        };
index e0264d0bf7b97118b19aa9af21611e36e832608b..42ee09ae4d79e4eab4da3aacc9b06bdab62c146a 100644 (file)
        dcan1_pins_default: dcan1_pins_default {
                pinctrl-single,pins = <
                        0x3d0   (PIN_OUTPUT | MUX_MODE0) /* dcan1_tx */
-                       0x3d4   (MUX_MODE15)            /* dcan1_rx.off */
                        0x418   (PULL_DIS | MUX_MODE1) /* wakeup0.dcan1_rx */
                >;
        };
        dcan1_pins_sleep: dcan1_pins_sleep {
                pinctrl-single,pins = <
                        0x3d0   (MUX_MODE15)    /* dcan1_tx.off */
-                       0x3d4   (MUX_MODE15)    /* dcan1_rx.off */
                        0x418   (MUX_MODE15)    /* wakeup0.off */
                >;
        };