skb_record_rx_queue(skb, rx_ring->queue_index);
}
-/**
- * i40e_pull_tail - i40e specific version of skb_pull_tail
- * @rx_ring: rx descriptor ring packet is being transacted on
- * @skb: pointer to current skb being adjusted
- *
- * This function is an i40e specific version of __pskb_pull_tail. The
- * main difference between this version and the original function is that
- * this function can make several assumptions about the state of things
- * that allow for significant optimizations versus the standard function.
- * As a result we can do things like drop a frag and maintain an accurate
- * truesize for the skb.
- */
-static void i40e_pull_tail(struct i40e_ring *rx_ring, struct sk_buff *skb)
-{
- struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[0];
- unsigned char *va;
- unsigned int pull_len;
-
- /* it is valid to use page_address instead of kmap since we are
- * working with pages allocated out of the lomem pool per
- * alloc_page(GFP_ATOMIC)
- */
- va = skb_frag_address(frag);
-
- /* we need the header to contain the greater of either ETH_HLEN or
- * 60 bytes if the skb->len is less than 60 for skb_pad.
- */
- pull_len = eth_get_headlen(va, I40E_RX_HDR_SIZE);
-
- /* align pull length to size of long to optimize memcpy performance */
- skb_copy_to_linear_data(skb, va, ALIGN(pull_len, sizeof(long)));
-
- /* update all of the pointers */
- skb_frag_size_sub(frag, pull_len);
- frag->page_offset += pull_len;
- skb->data_len -= pull_len;
- skb->tail += pull_len;
-}
-
/**
* i40e_cleanup_headers - Correct empty headers
* @rx_ring: rx descriptor ring packet is being transacted on
**/
static bool i40e_cleanup_headers(struct i40e_ring *rx_ring, struct sk_buff *skb)
{
- /* place header in linear portion of buffer */
- if (skb_is_nonlinear(skb))
- i40e_pull_tail(rx_ring, skb);
-
/* if eth_skb_pad returns an error the skb was freed */
if (eth_skb_pad(skb))
return true;
}
/**
- * i40e_page_is_reserved - check if reuse is possible
+ * i40e_page_is_reusable - check if any reuse is possible
* @page: page struct to check
+ *
+ * A page is not reusable if it was allocated under low memory
+ * conditions, or it's not in the same NUMA node as this CPU.
*/
-static inline bool i40e_page_is_reserved(struct page *page)
+static inline bool i40e_page_is_reusable(struct page *page)
{
- return (page_to_nid(page) != numa_mem_id()) || page_is_pfmemalloc(page);
+ return (page_to_nid(page) == numa_mem_id()) &&
+ !page_is_pfmemalloc(page);
+}
+
+/**
+ * i40e_can_reuse_rx_page - Determine if this page can be reused by
+ * the adapter for another receive
+ *
+ * @rx_buffer: buffer containing the page
+ * @page: page address from rx_buffer
+ * @truesize: actual size of the buffer in this page
+ *
+ * If page is reusable, rx_buffer->page_offset is adjusted to point to
+ * an unused region in the page.
+ *
+ * For small pages, @truesize will be a constant value, half the size
+ * of the memory at page. We'll attempt to alternate between high and
+ * low halves of the page, with one half ready for use by the hardware
+ * and the other half being consumed by the stack. We use the page
+ * ref count to determine whether the stack has finished consuming the
+ * portion of this page that was passed up with a previous packet. If
+ * the page ref count is >1, we'll assume the "other" half page is
+ * still busy, and this page cannot be reused.
+ *
+ * For larger pages, @truesize will be the actual space used by the
+ * received packet (adjusted upward to an even multiple of the cache
+ * line size). This will advance through the page by the amount
+ * actually consumed by the received packets while there is still
+ * space for a buffer. Each region of larger pages will be used at
+ * most once, after which the page will not be reused.
+ *
+ * In either case, if the page is reusable its refcount is increased.
+ **/
+static bool i40e_can_reuse_rx_page(struct i40e_rx_buffer *rx_buffer,
+ struct page *page,
+ const unsigned int truesize)
+{
+#if (PAGE_SIZE >= 8192)
+ unsigned int last_offset = PAGE_SIZE - I40E_RXBUFFER_2048;
+#endif
+
+ /* Is any reuse possible? */
+ if (unlikely(!i40e_page_is_reusable(page)))
+ return false;
+
+#if (PAGE_SIZE < 8192)
+ /* if we are only owner of page we can reuse it */
+ if (unlikely(page_count(page) != 1))
+ return false;
+
+ /* flip page offset to other buffer */
+ rx_buffer->page_offset ^= truesize;
+#else
+ /* move offset up to the next cache line */
+ rx_buffer->page_offset += truesize;
+
+ if (rx_buffer->page_offset > last_offset)
+ return false;
+#endif
+
+ /* Inc ref count on page before passing it up to the stack */
+ get_page(page);
+
+ return true;
}
/**
struct sk_buff *skb)
{
struct page *page = rx_buffer->page;
+ unsigned char *va = page_address(page) + rx_buffer->page_offset;
#if (PAGE_SIZE < 8192)
unsigned int truesize = I40E_RXBUFFER_2048;
#else
unsigned int truesize = ALIGN(size, L1_CACHE_BYTES);
- unsigned int last_offset = PAGE_SIZE - I40E_RXBUFFER_2048;
#endif
+ unsigned int pull_len;
+
+ if (unlikely(skb_is_nonlinear(skb)))
+ goto add_tail_frag;
/* will the data fit in the skb we allocated? if so, just
* copy it as it is pretty small anyway
*/
- if ((size <= I40E_RX_HDR_SIZE) && !skb_is_nonlinear(skb)) {
- unsigned char *va = page_address(page) + rx_buffer->page_offset;
-
+ if (size <= I40E_RX_HDR_SIZE) {
memcpy(__skb_put(skb, size), va, ALIGN(size, sizeof(long)));
- /* page is not reserved, we can reuse buffer as-is */
- if (likely(!i40e_page_is_reserved(page)))
+ /* page is reusable, we can reuse buffer as-is */
+ if (likely(i40e_page_is_reusable(page)))
return true;
/* this page cannot be reused so discard it */
return false;
}
- skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page,
- rx_buffer->page_offset, size, truesize);
-
- /* avoid re-using remote pages */
- if (unlikely(i40e_page_is_reserved(page)))
- return false;
-
-#if (PAGE_SIZE < 8192)
- /* if we are only owner of page we can reuse it */
- if (unlikely(page_count(page) != 1))
- return false;
+ /* we need the header to contain the greater of either
+ * ETH_HLEN or 60 bytes if the skb->len is less than
+ * 60 for skb_pad.
+ */
+ pull_len = eth_get_headlen(va, I40E_RX_HDR_SIZE);
- /* flip page offset to other buffer */
- rx_buffer->page_offset ^= truesize;
-#else
- /* move offset up to the next cache line */
- rx_buffer->page_offset += truesize;
+ /* align pull length to size of long to optimize
+ * memcpy performance
+ */
+ memcpy(__skb_put(skb, pull_len), va, ALIGN(pull_len, sizeof(long)));
- if (rx_buffer->page_offset > last_offset)
- return false;
-#endif
+ /* update all of the pointers */
+ va += pull_len;
+ size -= pull_len;
- /* Even if we own the page, we are not allowed to use atomic_set()
- * This would break get_page_unless_zero() users.
- */
- get_page(rx_buffer->page);
+add_tail_frag:
+ skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page,
+ (unsigned long)va & ~PAGE_MASK, size, truesize);
- return true;
+ return i40e_can_reuse_rx_page(rx_buffer, page, truesize);
}
/**
skb_record_rx_queue(skb, rx_ring->queue_index);
}
-/**
- * i40e_pull_tail - i40e specific version of skb_pull_tail
- * @rx_ring: rx descriptor ring packet is being transacted on
- * @skb: pointer to current skb being adjusted
- *
- * This function is an i40e specific version of __pskb_pull_tail. The
- * main difference between this version and the original function is that
- * this function can make several assumptions about the state of things
- * that allow for significant optimizations versus the standard function.
- * As a result we can do things like drop a frag and maintain an accurate
- * truesize for the skb.
- */
-static void i40e_pull_tail(struct i40e_ring *rx_ring, struct sk_buff *skb)
-{
- struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[0];
- unsigned char *va;
- unsigned int pull_len;
-
- /* it is valid to use page_address instead of kmap since we are
- * working with pages allocated out of the lomem pool per
- * alloc_page(GFP_ATOMIC)
- */
- va = skb_frag_address(frag);
-
- /* we need the header to contain the greater of either ETH_HLEN or
- * 60 bytes if the skb->len is less than 60 for skb_pad.
- */
- pull_len = eth_get_headlen(va, I40E_RX_HDR_SIZE);
-
- /* align pull length to size of long to optimize memcpy performance */
- skb_copy_to_linear_data(skb, va, ALIGN(pull_len, sizeof(long)));
-
- /* update all of the pointers */
- skb_frag_size_sub(frag, pull_len);
- frag->page_offset += pull_len;
- skb->data_len -= pull_len;
- skb->tail += pull_len;
-}
-
/**
* i40e_cleanup_headers - Correct empty headers
* @rx_ring: rx descriptor ring packet is being transacted on
**/
static bool i40e_cleanup_headers(struct i40e_ring *rx_ring, struct sk_buff *skb)
{
- /* place header in linear portion of buffer */
- if (skb_is_nonlinear(skb))
- i40e_pull_tail(rx_ring, skb);
-
/* if eth_skb_pad returns an error the skb was freed */
if (eth_skb_pad(skb))
return true;
}
/**
- * i40e_page_is_reserved - check if reuse is possible
+ * i40e_page_is_reusable - check if any reuse is possible
* @page: page struct to check
+ *
+ * A page is not reusable if it was allocated under low memory
+ * conditions, or it's not in the same NUMA node as this CPU.
*/
-static inline bool i40e_page_is_reserved(struct page *page)
+static inline bool i40e_page_is_reusable(struct page *page)
{
- return (page_to_nid(page) != numa_mem_id()) || page_is_pfmemalloc(page);
+ return (page_to_nid(page) == numa_mem_id()) &&
+ !page_is_pfmemalloc(page);
+}
+
+/**
+ * i40e_can_reuse_rx_page - Determine if this page can be reused by
+ * the adapter for another receive
+ *
+ * @rx_buffer: buffer containing the page
+ * @page: page address from rx_buffer
+ * @truesize: actual size of the buffer in this page
+ *
+ * If page is reusable, rx_buffer->page_offset is adjusted to point to
+ * an unused region in the page.
+ *
+ * For small pages, @truesize will be a constant value, half the size
+ * of the memory at page. We'll attempt to alternate between high and
+ * low halves of the page, with one half ready for use by the hardware
+ * and the other half being consumed by the stack. We use the page
+ * ref count to determine whether the stack has finished consuming the
+ * portion of this page that was passed up with a previous packet. If
+ * the page ref count is >1, we'll assume the "other" half page is
+ * still busy, and this page cannot be reused.
+ *
+ * For larger pages, @truesize will be the actual space used by the
+ * received packet (adjusted upward to an even multiple of the cache
+ * line size). This will advance through the page by the amount
+ * actually consumed by the received packets while there is still
+ * space for a buffer. Each region of larger pages will be used at
+ * most once, after which the page will not be reused.
+ *
+ * In either case, if the page is reusable its refcount is increased.
+ **/
+static bool i40e_can_reuse_rx_page(struct i40e_rx_buffer *rx_buffer,
+ struct page *page,
+ const unsigned int truesize)
+{
+#if (PAGE_SIZE >= 8192)
+ unsigned int last_offset = PAGE_SIZE - I40E_RXBUFFER_2048;
+#endif
+
+ /* Is any reuse possible? */
+ if (unlikely(!i40e_page_is_reusable(page)))
+ return false;
+
+#if (PAGE_SIZE < 8192)
+ /* if we are only owner of page we can reuse it */
+ if (unlikely(page_count(page) != 1))
+ return false;
+
+ /* flip page offset to other buffer */
+ rx_buffer->page_offset ^= truesize;
+#else
+ /* move offset up to the next cache line */
+ rx_buffer->page_offset += truesize;
+
+ if (rx_buffer->page_offset > last_offset)
+ return false;
+#endif
+
+ /* Inc ref count on page before passing it up to the stack */
+ get_page(page);
+
+ return true;
}
/**
struct sk_buff *skb)
{
struct page *page = rx_buffer->page;
+ unsigned char *va = page_address(page) + rx_buffer->page_offset;
#if (PAGE_SIZE < 8192)
unsigned int truesize = I40E_RXBUFFER_2048;
#else
unsigned int truesize = ALIGN(size, L1_CACHE_BYTES);
- unsigned int last_offset = PAGE_SIZE - I40E_RXBUFFER_2048;
#endif
+ unsigned int pull_len;
+
+ if (unlikely(skb_is_nonlinear(skb)))
+ goto add_tail_frag;
/* will the data fit in the skb we allocated? if so, just
* copy it as it is pretty small anyway
*/
- if ((size <= I40E_RX_HDR_SIZE) && !skb_is_nonlinear(skb)) {
- unsigned char *va = page_address(page) + rx_buffer->page_offset;
-
+ if (size <= I40E_RX_HDR_SIZE) {
memcpy(__skb_put(skb, size), va, ALIGN(size, sizeof(long)));
- /* page is not reserved, we can reuse buffer as-is */
- if (likely(!i40e_page_is_reserved(page)))
+ /* page is reusable, we can reuse buffer as-is */
+ if (likely(i40e_page_is_reusable(page)))
return true;
/* this page cannot be reused so discard it */
return false;
}
- skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page,
- rx_buffer->page_offset, size, truesize);
-
- /* avoid re-using remote pages */
- if (unlikely(i40e_page_is_reserved(page)))
- return false;
-
-#if (PAGE_SIZE < 8192)
- /* if we are only owner of page we can reuse it */
- if (unlikely(page_count(page) != 1))
- return false;
+ /* we need the header to contain the greater of either
+ * ETH_HLEN or 60 bytes if the skb->len is less than
+ * 60 for skb_pad.
+ */
+ pull_len = eth_get_headlen(va, I40E_RX_HDR_SIZE);
- /* flip page offset to other buffer */
- rx_buffer->page_offset ^= truesize;
-#else
- /* move offset up to the next cache line */
- rx_buffer->page_offset += truesize;
+ /* align pull length to size of long to optimize
+ * memcpy performance
+ */
+ memcpy(__skb_put(skb, pull_len), va, ALIGN(pull_len, sizeof(long)));
- if (rx_buffer->page_offset > last_offset)
- return false;
-#endif
+ /* update all of the pointers */
+ va += pull_len;
+ size -= pull_len;
- /* Even if we own the page, we are not allowed to use atomic_set()
- * This would break get_page_unless_zero() users.
- */
- get_page(rx_buffer->page);
+add_tail_frag:
+ skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page,
+ (unsigned long)va & ~PAGE_MASK, size, truesize);
- return true;
+ return i40e_can_reuse_rx_page(rx_buffer, page, truesize);
}
/**
projects / openwrt / staging / blogic.git / commitdiff