CONFIG_SCSI=y
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SENSORS_AD7418=y
-CONFIG_SENSORS_GSP=y
+CONFIG_SENSORS_GSC=y
CONFIG_SERIAL_8250_NR_UARTS=3
CONFIG_SERIAL_8250_RUNTIME_UARTS=3
CONFIG_SMP=y
+++ /dev/null
---- a/drivers/hwmon/Kconfig
-+++ b/drivers/hwmon/Kconfig
-@@ -423,6 +423,15 @@ config SENSORS_GL520SM
- This driver can also be built as a module. If so, the module
- will be called gl520sm.
-
-+config SENSORS_GSP
-+ tristate "Gateworks System Peripheral"
-+ depends on I2C && EXPERIMENTAL
-+ help
-+ If you say yes here you get support for the Gateworks System Peripherals.
-+
-+ This driver can also be built as a module. If so, the module
-+ will be called gsp.
-+
- config SENSORS_GPIO_FAN
- tristate "GPIO fan"
- depends on GENERIC_GPIO
---- a/drivers/hwmon/Makefile
-+++ b/drivers/hwmon/Makefile
-@@ -125,6 +125,7 @@ obj-$(CONFIG_SENSORS_W83L785TS) += w83l7
- obj-$(CONFIG_SENSORS_W83L786NG) += w83l786ng.o
- obj-$(CONFIG_SENSORS_WM831X) += wm831x-hwmon.o
- obj-$(CONFIG_SENSORS_WM8350) += wm8350-hwmon.o
-+obj-$(CONFIG_SENSORS_GSP) += gsp.o
-
- obj-$(CONFIG_PMBUS) += pmbus/
-
---- /dev/null
-+++ b/drivers/hwmon/gsp.c
-@@ -0,0 +1,308 @@
-+/*
-+ * A hwmon driver for the Gateworks System Peripheral
-+ * Copyright (C) 2009 Gateworks Corporation
-+ *
-+ * Author: Chris Lang <clang@gateworks.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License,
-+ * as published by the Free Software Foundation - version 2.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/i2c.h>
-+#include <linux/hwmon.h>
-+#include <linux/hwmon-sysfs.h>
-+#include <linux/err.h>
-+#include <linux/slab.h>
-+
-+#define DRV_VERSION "0.2"
-+
-+enum chips { gsp };
-+
-+/* AD7418 registers */
-+#define GSP_REG_TEMP_IN 0x00
-+#define GSP_REG_VIN 0x02
-+#define GSP_REG_3P3 0x05
-+#define GSP_REG_BAT 0x08
-+#define GSP_REG_5P0 0x0b
-+#define GSP_REG_CORE 0x0e
-+#define GSP_REG_CPU1 0x11
-+#define GSP_REG_CPU2 0x14
-+#define GSP_REG_DRAM 0x17
-+#define GSP_REG_EXT_BAT 0x1a
-+#define GSP_REG_IO1 0x1d
-+#define GSP_REG_IO2 0x20
-+#define GSP_REG_PCIE 0x23
-+#define GSP_REG_CURRENT 0x26
-+#define GSP_FAN_0 0x2C
-+#define GSP_FAN_1 0x2E
-+#define GSP_FAN_2 0x30
-+#define GSP_FAN_3 0x32
-+#define GSP_FAN_4 0x34
-+#define GSP_FAN_5 0x36
-+
-+struct gsp_sensor_info {
-+ const char* name;
-+ int reg;
-+};
-+
-+static const struct gsp_sensor_info gsp_sensors[] = {
-+ {"temp", GSP_REG_TEMP_IN},
-+ {"vin", GSP_REG_VIN},
-+ {"3p3", GSP_REG_3P3},
-+ {"bat", GSP_REG_BAT},
-+ {"5p0", GSP_REG_5P0},
-+ {"core", GSP_REG_CORE},
-+ {"cpu1", GSP_REG_CPU1},
-+ {"cpu2", GSP_REG_CPU2},
-+ {"dram", GSP_REG_DRAM},
-+ {"ext_bat", GSP_REG_EXT_BAT},
-+ {"io1", GSP_REG_IO1},
-+ {"io2", GSP_REG_IO2},
-+ {"pci2", GSP_REG_PCIE},
-+ {"current", GSP_REG_CURRENT},
-+ {"fan_point0", GSP_FAN_0},
-+ {"fan_point1", GSP_FAN_1},
-+ {"fan_point2", GSP_FAN_2},
-+ {"fan_point3", GSP_FAN_3},
-+ {"fan_point4", GSP_FAN_4},
-+ {"fan_point5", GSP_FAN_5},
-+};
-+
-+struct gsp_data {
-+ struct device *hwmon_dev;
-+ struct attribute_group attrs;
-+ enum chips type;
-+};
-+
-+static int gsp_probe(struct i2c_client *client,
-+ const struct i2c_device_id *id);
-+static int gsp_remove(struct i2c_client *client);
-+
-+static const struct i2c_device_id gsp_id[] = {
-+ { "gsp", 0 },
-+ { }
-+};
-+MODULE_DEVICE_TABLE(i2c, gsp_id);
-+
-+static struct i2c_driver gsp_driver = {
-+ .driver = {
-+ .name = "gsp",
-+ },
-+ .probe = gsp_probe,
-+ .remove = gsp_remove,
-+ .id_table = gsp_id,
-+};
-+
-+/* All registers are word-sized, except for the configuration registers.
-+ * AD7418 uses a high-byte first convention. Do NOT use those functions to
-+ * access the configuration registers CONF and CONF2, as they are byte-sized.
-+ */
-+static inline int gsp_read(struct i2c_client *client, u8 reg)
-+{
-+ unsigned int adc = 0;
-+ if (reg == GSP_REG_TEMP_IN || reg > GSP_REG_CURRENT)
-+ {
-+ adc |= i2c_smbus_read_byte_data(client, reg);
-+ adc |= i2c_smbus_read_byte_data(client, reg + 1) << 8;
-+ return adc;
-+ }
-+ else
-+ {
-+ adc |= i2c_smbus_read_byte_data(client, reg);
-+ adc |= i2c_smbus_read_byte_data(client, reg + 1) << 8;
-+ adc |= i2c_smbus_read_byte_data(client, reg + 2) << 16;
-+ return adc;
-+ }
-+}
-+
-+static inline int gsp_write(struct i2c_client *client, u8 reg, u16 value)
-+{
-+ i2c_smbus_write_byte_data(client, reg, value & 0xff);
-+ i2c_smbus_write_byte_data(client, reg + 1, ((value >> 8) & 0xff));
-+ return 1;
-+}
-+
-+static ssize_t show_adc(struct device *dev, struct device_attribute *devattr,
-+ char *buf)
-+{
-+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-+ struct i2c_client *client = to_i2c_client(dev);
-+ return sprintf(buf, "%d\n", gsp_read(client, gsp_sensors[attr->index].reg));
-+}
-+
-+static ssize_t show_label(struct device *dev,
-+ struct device_attribute *devattr, char *buf)
-+{
-+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-+
-+ return sprintf(buf, "%s\n", gsp_sensors[attr->index].name);
-+}
-+
-+static ssize_t store_fan(struct device *dev,
-+ struct device_attribute *devattr, const char *buf, size_t count)
-+{
-+ u16 val;
-+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-+ struct i2c_client *client = to_i2c_client(dev);
-+ val = simple_strtoul(buf, NULL, 10);
-+ gsp_write(client, gsp_sensors[attr->index].reg, val);
-+ return count;
-+}
-+
-+static SENSOR_DEVICE_ATTR(temp0_input, S_IRUGO, show_adc, NULL, 0);
-+static SENSOR_DEVICE_ATTR(temp0_label, S_IRUGO, show_label, NULL, 0);
-+
-+static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, show_adc, NULL, 1);
-+static SENSOR_DEVICE_ATTR(in0_label, S_IRUGO, show_label, NULL, 1);
-+static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_adc, NULL, 2);
-+static SENSOR_DEVICE_ATTR(in1_label, S_IRUGO, show_label, NULL, 2);
-+static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_adc, NULL, 3);
-+static SENSOR_DEVICE_ATTR(in2_label, S_IRUGO, show_label, NULL, 3);
-+static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_adc, NULL, 4);
-+static SENSOR_DEVICE_ATTR(in3_label, S_IRUGO, show_label, NULL, 4);
-+static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, show_adc, NULL, 5);
-+static SENSOR_DEVICE_ATTR(in4_label, S_IRUGO, show_label, NULL, 5);
-+static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, show_adc, NULL, 6);
-+static SENSOR_DEVICE_ATTR(in5_label, S_IRUGO, show_label, NULL, 6);
-+static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, show_adc, NULL, 7);
-+static SENSOR_DEVICE_ATTR(in6_label, S_IRUGO, show_label, NULL, 7);
-+static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, show_adc, NULL, 8);
-+static SENSOR_DEVICE_ATTR(in7_label, S_IRUGO, show_label, NULL, 8);
-+static SENSOR_DEVICE_ATTR(in8_input, S_IRUGO, show_adc, NULL, 9);
-+static SENSOR_DEVICE_ATTR(in8_label, S_IRUGO, show_label, NULL, 9);
-+static SENSOR_DEVICE_ATTR(in9_input, S_IRUGO, show_adc, NULL, 10);
-+static SENSOR_DEVICE_ATTR(in9_label, S_IRUGO, show_label, NULL, 10);
-+static SENSOR_DEVICE_ATTR(in10_input, S_IRUGO, show_adc, NULL, 11);
-+static SENSOR_DEVICE_ATTR(in10_label, S_IRUGO, show_label, NULL, 11);
-+static SENSOR_DEVICE_ATTR(in11_input, S_IRUGO, show_adc, NULL, 12);
-+static SENSOR_DEVICE_ATTR(in11_label, S_IRUGO, show_label, NULL, 12);
-+static SENSOR_DEVICE_ATTR(in12_input, S_IRUGO, show_adc, NULL, 13);
-+static SENSOR_DEVICE_ATTR(in12_label, S_IRUGO, show_label, NULL, 13);
-+
-+static SENSOR_DEVICE_ATTR(fan0_point0, S_IRUGO | S_IWUSR, show_adc, store_fan, 14);
-+static SENSOR_DEVICE_ATTR(fan0_point1, S_IRUGO | S_IWUSR, show_adc, store_fan, 15);
-+static SENSOR_DEVICE_ATTR(fan0_point2, S_IRUGO | S_IWUSR, show_adc, store_fan, 16);
-+static SENSOR_DEVICE_ATTR(fan0_point3, S_IRUGO | S_IWUSR, show_adc, store_fan, 17);
-+static SENSOR_DEVICE_ATTR(fan0_point4, S_IRUGO | S_IWUSR, show_adc, store_fan, 18);
-+static SENSOR_DEVICE_ATTR(fan0_point5, S_IRUGO | S_IWUSR, show_adc, store_fan, 19);
-+
-+static struct attribute *gsp_attributes[] = {
-+ &sensor_dev_attr_temp0_input.dev_attr.attr,
-+ &sensor_dev_attr_in0_input.dev_attr.attr,
-+ &sensor_dev_attr_in1_input.dev_attr.attr,
-+ &sensor_dev_attr_in2_input.dev_attr.attr,
-+ &sensor_dev_attr_in3_input.dev_attr.attr,
-+ &sensor_dev_attr_in4_input.dev_attr.attr,
-+ &sensor_dev_attr_in5_input.dev_attr.attr,
-+ &sensor_dev_attr_in6_input.dev_attr.attr,
-+ &sensor_dev_attr_in7_input.dev_attr.attr,
-+ &sensor_dev_attr_in8_input.dev_attr.attr,
-+ &sensor_dev_attr_in9_input.dev_attr.attr,
-+ &sensor_dev_attr_in10_input.dev_attr.attr,
-+ &sensor_dev_attr_in11_input.dev_attr.attr,
-+ &sensor_dev_attr_in12_input.dev_attr.attr,
-+
-+ &sensor_dev_attr_temp0_label.dev_attr.attr,
-+ &sensor_dev_attr_in0_label.dev_attr.attr,
-+ &sensor_dev_attr_in1_label.dev_attr.attr,
-+ &sensor_dev_attr_in2_label.dev_attr.attr,
-+ &sensor_dev_attr_in3_label.dev_attr.attr,
-+ &sensor_dev_attr_in4_label.dev_attr.attr,
-+ &sensor_dev_attr_in5_label.dev_attr.attr,
-+ &sensor_dev_attr_in6_label.dev_attr.attr,
-+ &sensor_dev_attr_in7_label.dev_attr.attr,
-+ &sensor_dev_attr_in8_label.dev_attr.attr,
-+ &sensor_dev_attr_in9_label.dev_attr.attr,
-+ &sensor_dev_attr_in10_label.dev_attr.attr,
-+ &sensor_dev_attr_in11_label.dev_attr.attr,
-+ &sensor_dev_attr_in12_label.dev_attr.attr,
-+
-+ &sensor_dev_attr_fan0_point0.dev_attr.attr,
-+ &sensor_dev_attr_fan0_point1.dev_attr.attr,
-+ &sensor_dev_attr_fan0_point2.dev_attr.attr,
-+ &sensor_dev_attr_fan0_point3.dev_attr.attr,
-+ &sensor_dev_attr_fan0_point4.dev_attr.attr,
-+ &sensor_dev_attr_fan0_point5.dev_attr.attr,
-+ NULL
-+};
-+
-+
-+static int gsp_probe(struct i2c_client *client,
-+ const struct i2c_device_id *id)
-+{
-+ struct i2c_adapter *adapter = client->adapter;
-+ struct gsp_data *data;
-+ int err;
-+
-+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
-+ I2C_FUNC_SMBUS_WORD_DATA)) {
-+ err = -EOPNOTSUPP;
-+ goto exit;
-+ }
-+
-+ if (!(data = kzalloc(sizeof(struct gsp_data), GFP_KERNEL))) {
-+ err = -ENOMEM;
-+ goto exit;
-+ }
-+
-+ i2c_set_clientdata(client, data);
-+
-+ data->type = id->driver_data;
-+
-+ switch (data->type) {
-+ case 0:
-+ data->attrs.attrs = gsp_attributes;
-+ break;
-+ }
-+
-+ dev_info(&client->dev, "%s chip found\n", client->name);
-+
-+ /* Register sysfs hooks */
-+ if ((err = sysfs_create_group(&client->dev.kobj, &data->attrs)))
-+ goto exit_free;
-+
-+ data->hwmon_dev = hwmon_device_register(&client->dev);
-+ if (IS_ERR(data->hwmon_dev)) {
-+ err = PTR_ERR(data->hwmon_dev);
-+ goto exit_remove;
-+ }
-+
-+ return 0;
-+
-+exit_remove:
-+ sysfs_remove_group(&client->dev.kobj, &data->attrs);
-+exit_free:
-+ kfree(data);
-+exit:
-+ return err;
-+}
-+
-+static int gsp_remove(struct i2c_client *client)
-+{
-+ struct gsp_data *data = i2c_get_clientdata(client);
-+ hwmon_device_unregister(data->hwmon_dev);
-+ sysfs_remove_group(&client->dev.kobj, &data->attrs);
-+ kfree(data);
-+ return 0;
-+}
-+
-+static int __init gsp_init(void)
-+{
-+ return i2c_add_driver(&gsp_driver);
-+}
-+
-+static void __exit gsp_exit(void)
-+{
-+ i2c_del_driver(&gsp_driver);
-+}
-+
-+module_init(gsp_init);
-+module_exit(gsp_exit);
-+
-+MODULE_AUTHOR("Chris Lang <clang@gateworks.com>");
-+MODULE_DESCRIPTION("GSP HWMON driver");
-+MODULE_LICENSE("GPL");
-+MODULE_VERSION(DRV_VERSION);
-+
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_GPIO_FAN is not set
+# CONFIG_SENSORS_GSC is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_IT87 is not set
--- /dev/null
+--- a/drivers/hwmon/Kconfig
++++ b/drivers/hwmon/Kconfig
+@@ -423,6 +423,15 @@ config SENSORS_GL520SM
+ This driver can also be built as a module. If so, the module
+ will be called gl520sm.
+
++config SENSORS_GSC
++ tristate "Gateworks System Controller"
++ depends on I2C && (ARCH_DAVINCI || ARCH_CNS3XXX || ARCH_IXP4XX)
++ help
++ If you say yes here you get support for the Gateworks System Controller.
++
++ This driver can also be built as a module. If so, the module
++ will be called gsc.
++
+ config SENSORS_GPIO_FAN
+ tristate "GPIO fan"
+ depends on GENERIC_GPIO
+--- a/drivers/hwmon/Makefile
++++ b/drivers/hwmon/Makefile
+@@ -125,6 +125,7 @@ obj-$(CONFIG_SENSORS_W83L785TS) += w83l7
+ obj-$(CONFIG_SENSORS_W83L786NG) += w83l786ng.o
+ obj-$(CONFIG_SENSORS_WM831X) += wm831x-hwmon.o
+ obj-$(CONFIG_SENSORS_WM8350) += wm8350-hwmon.o
++obj-$(CONFIG_SENSORS_GSC) += gsc.o
+
+ obj-$(CONFIG_PMBUS) += pmbus/
+
+--- /dev/null
++++ b/drivers/hwmon/gsc.c
+@@ -0,0 +1,308 @@
++/*
++ * A hwmon driver for the Gateworks System Controller
++ * Copyright (C) 2009 Gateworks Corporation
++ *
++ * Author: Chris Lang <clang@gateworks.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License,
++ * as published by the Free Software Foundation - version 2.
++ */
++
++#include <linux/module.h>
++#include <linux/i2c.h>
++#include <linux/hwmon.h>
++#include <linux/hwmon-sysfs.h>
++#include <linux/err.h>
++#include <linux/slab.h>
++
++#define DRV_VERSION "0.2"
++
++enum chips { gsp };
++
++/* AD7418 registers */
++#define GSP_REG_TEMP_IN 0x00
++#define GSP_REG_VIN 0x02
++#define GSP_REG_3P3 0x05
++#define GSP_REG_BAT 0x08
++#define GSP_REG_5P0 0x0b
++#define GSP_REG_CORE 0x0e
++#define GSP_REG_CPU1 0x11
++#define GSP_REG_CPU2 0x14
++#define GSP_REG_DRAM 0x17
++#define GSP_REG_EXT_BAT 0x1a
++#define GSP_REG_IO1 0x1d
++#define GSP_REG_IO2 0x20
++#define GSP_REG_PCIE 0x23
++#define GSP_REG_CURRENT 0x26
++#define GSP_FAN_0 0x2C
++#define GSP_FAN_1 0x2E
++#define GSP_FAN_2 0x30
++#define GSP_FAN_3 0x32
++#define GSP_FAN_4 0x34
++#define GSP_FAN_5 0x36
++
++struct gsp_sensor_info {
++ const char* name;
++ int reg;
++};
++
++static const struct gsp_sensor_info gsp_sensors[] = {
++ {"temp", GSP_REG_TEMP_IN},
++ {"vin", GSP_REG_VIN},
++ {"3p3", GSP_REG_3P3},
++ {"bat", GSP_REG_BAT},
++ {"5p0", GSP_REG_5P0},
++ {"core", GSP_REG_CORE},
++ {"cpu1", GSP_REG_CPU1},
++ {"cpu2", GSP_REG_CPU2},
++ {"dram", GSP_REG_DRAM},
++ {"ext_bat", GSP_REG_EXT_BAT},
++ {"io1", GSP_REG_IO1},
++ {"io2", GSP_REG_IO2},
++ {"pci2", GSP_REG_PCIE},
++ {"current", GSP_REG_CURRENT},
++ {"fan_point0", GSP_FAN_0},
++ {"fan_point1", GSP_FAN_1},
++ {"fan_point2", GSP_FAN_2},
++ {"fan_point3", GSP_FAN_3},
++ {"fan_point4", GSP_FAN_4},
++ {"fan_point5", GSP_FAN_5},
++};
++
++struct gsp_data {
++ struct device *hwmon_dev;
++ struct attribute_group attrs;
++ enum chips type;
++};
++
++static int gsp_probe(struct i2c_client *client,
++ const struct i2c_device_id *id);
++static int gsp_remove(struct i2c_client *client);
++
++static const struct i2c_device_id gsp_id[] = {
++ { "gsp", 0 },
++ { }
++};
++MODULE_DEVICE_TABLE(i2c, gsp_id);
++
++static struct i2c_driver gsp_driver = {
++ .driver = {
++ .name = "gsp",
++ },
++ .probe = gsp_probe,
++ .remove = gsp_remove,
++ .id_table = gsp_id,
++};
++
++/* All registers are word-sized, except for the configuration registers.
++ * AD7418 uses a high-byte first convention. Do NOT use those functions to
++ * access the configuration registers CONF and CONF2, as they are byte-sized.
++ */
++static inline int gsp_read(struct i2c_client *client, u8 reg)
++{
++ unsigned int adc = 0;
++ if (reg == GSP_REG_TEMP_IN || reg > GSP_REG_CURRENT)
++ {
++ adc |= i2c_smbus_read_byte_data(client, reg);
++ adc |= i2c_smbus_read_byte_data(client, reg + 1) << 8;
++ return adc;
++ }
++ else
++ {
++ adc |= i2c_smbus_read_byte_data(client, reg);
++ adc |= i2c_smbus_read_byte_data(client, reg + 1) << 8;
++ adc |= i2c_smbus_read_byte_data(client, reg + 2) << 16;
++ return adc;
++ }
++}
++
++static inline int gsp_write(struct i2c_client *client, u8 reg, u16 value)
++{
++ i2c_smbus_write_byte_data(client, reg, value & 0xff);
++ i2c_smbus_write_byte_data(client, reg + 1, ((value >> 8) & 0xff));
++ return 1;
++}
++
++static ssize_t show_adc(struct device *dev, struct device_attribute *devattr,
++ char *buf)
++{
++ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
++ struct i2c_client *client = to_i2c_client(dev);
++ return sprintf(buf, "%d\n", gsp_read(client, gsp_sensors[attr->index].reg));
++}
++
++static ssize_t show_label(struct device *dev,
++ struct device_attribute *devattr, char *buf)
++{
++ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
++
++ return sprintf(buf, "%s\n", gsp_sensors[attr->index].name);
++}
++
++static ssize_t store_fan(struct device *dev,
++ struct device_attribute *devattr, const char *buf, size_t count)
++{
++ u16 val;
++ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
++ struct i2c_client *client = to_i2c_client(dev);
++ val = simple_strtoul(buf, NULL, 10);
++ gsp_write(client, gsp_sensors[attr->index].reg, val);
++ return count;
++}
++
++static SENSOR_DEVICE_ATTR(temp0_input, S_IRUGO, show_adc, NULL, 0);
++static SENSOR_DEVICE_ATTR(temp0_label, S_IRUGO, show_label, NULL, 0);
++
++static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, show_adc, NULL, 1);
++static SENSOR_DEVICE_ATTR(in0_label, S_IRUGO, show_label, NULL, 1);
++static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_adc, NULL, 2);
++static SENSOR_DEVICE_ATTR(in1_label, S_IRUGO, show_label, NULL, 2);
++static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_adc, NULL, 3);
++static SENSOR_DEVICE_ATTR(in2_label, S_IRUGO, show_label, NULL, 3);
++static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_adc, NULL, 4);
++static SENSOR_DEVICE_ATTR(in3_label, S_IRUGO, show_label, NULL, 4);
++static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, show_adc, NULL, 5);
++static SENSOR_DEVICE_ATTR(in4_label, S_IRUGO, show_label, NULL, 5);
++static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, show_adc, NULL, 6);
++static SENSOR_DEVICE_ATTR(in5_label, S_IRUGO, show_label, NULL, 6);
++static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, show_adc, NULL, 7);
++static SENSOR_DEVICE_ATTR(in6_label, S_IRUGO, show_label, NULL, 7);
++static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, show_adc, NULL, 8);
++static SENSOR_DEVICE_ATTR(in7_label, S_IRUGO, show_label, NULL, 8);
++static SENSOR_DEVICE_ATTR(in8_input, S_IRUGO, show_adc, NULL, 9);
++static SENSOR_DEVICE_ATTR(in8_label, S_IRUGO, show_label, NULL, 9);
++static SENSOR_DEVICE_ATTR(in9_input, S_IRUGO, show_adc, NULL, 10);
++static SENSOR_DEVICE_ATTR(in9_label, S_IRUGO, show_label, NULL, 10);
++static SENSOR_DEVICE_ATTR(in10_input, S_IRUGO, show_adc, NULL, 11);
++static SENSOR_DEVICE_ATTR(in10_label, S_IRUGO, show_label, NULL, 11);
++static SENSOR_DEVICE_ATTR(in11_input, S_IRUGO, show_adc, NULL, 12);
++static SENSOR_DEVICE_ATTR(in11_label, S_IRUGO, show_label, NULL, 12);
++static SENSOR_DEVICE_ATTR(in12_input, S_IRUGO, show_adc, NULL, 13);
++static SENSOR_DEVICE_ATTR(in12_label, S_IRUGO, show_label, NULL, 13);
++
++static SENSOR_DEVICE_ATTR(fan0_point0, S_IRUGO | S_IWUSR, show_adc, store_fan, 14);
++static SENSOR_DEVICE_ATTR(fan0_point1, S_IRUGO | S_IWUSR, show_adc, store_fan, 15);
++static SENSOR_DEVICE_ATTR(fan0_point2, S_IRUGO | S_IWUSR, show_adc, store_fan, 16);
++static SENSOR_DEVICE_ATTR(fan0_point3, S_IRUGO | S_IWUSR, show_adc, store_fan, 17);
++static SENSOR_DEVICE_ATTR(fan0_point4, S_IRUGO | S_IWUSR, show_adc, store_fan, 18);
++static SENSOR_DEVICE_ATTR(fan0_point5, S_IRUGO | S_IWUSR, show_adc, store_fan, 19);
++
++static struct attribute *gsp_attributes[] = {
++ &sensor_dev_attr_temp0_input.dev_attr.attr,
++ &sensor_dev_attr_in0_input.dev_attr.attr,
++ &sensor_dev_attr_in1_input.dev_attr.attr,
++ &sensor_dev_attr_in2_input.dev_attr.attr,
++ &sensor_dev_attr_in3_input.dev_attr.attr,
++ &sensor_dev_attr_in4_input.dev_attr.attr,
++ &sensor_dev_attr_in5_input.dev_attr.attr,
++ &sensor_dev_attr_in6_input.dev_attr.attr,
++ &sensor_dev_attr_in7_input.dev_attr.attr,
++ &sensor_dev_attr_in8_input.dev_attr.attr,
++ &sensor_dev_attr_in9_input.dev_attr.attr,
++ &sensor_dev_attr_in10_input.dev_attr.attr,
++ &sensor_dev_attr_in11_input.dev_attr.attr,
++ &sensor_dev_attr_in12_input.dev_attr.attr,
++
++ &sensor_dev_attr_temp0_label.dev_attr.attr,
++ &sensor_dev_attr_in0_label.dev_attr.attr,
++ &sensor_dev_attr_in1_label.dev_attr.attr,
++ &sensor_dev_attr_in2_label.dev_attr.attr,
++ &sensor_dev_attr_in3_label.dev_attr.attr,
++ &sensor_dev_attr_in4_label.dev_attr.attr,
++ &sensor_dev_attr_in5_label.dev_attr.attr,
++ &sensor_dev_attr_in6_label.dev_attr.attr,
++ &sensor_dev_attr_in7_label.dev_attr.attr,
++ &sensor_dev_attr_in8_label.dev_attr.attr,
++ &sensor_dev_attr_in9_label.dev_attr.attr,
++ &sensor_dev_attr_in10_label.dev_attr.attr,
++ &sensor_dev_attr_in11_label.dev_attr.attr,
++ &sensor_dev_attr_in12_label.dev_attr.attr,
++
++ &sensor_dev_attr_fan0_point0.dev_attr.attr,
++ &sensor_dev_attr_fan0_point1.dev_attr.attr,
++ &sensor_dev_attr_fan0_point2.dev_attr.attr,
++ &sensor_dev_attr_fan0_point3.dev_attr.attr,
++ &sensor_dev_attr_fan0_point4.dev_attr.attr,
++ &sensor_dev_attr_fan0_point5.dev_attr.attr,
++ NULL
++};
++
++
++static int gsp_probe(struct i2c_client *client,
++ const struct i2c_device_id *id)
++{
++ struct i2c_adapter *adapter = client->adapter;
++ struct gsp_data *data;
++ int err;
++
++ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
++ I2C_FUNC_SMBUS_WORD_DATA)) {
++ err = -EOPNOTSUPP;
++ goto exit;
++ }
++
++ if (!(data = kzalloc(sizeof(struct gsp_data), GFP_KERNEL))) {
++ err = -ENOMEM;
++ goto exit;
++ }
++
++ i2c_set_clientdata(client, data);
++
++ data->type = id->driver_data;
++
++ switch (data->type) {
++ case 0:
++ data->attrs.attrs = gsp_attributes;
++ break;
++ }
++
++ dev_info(&client->dev, "%s chip found\n", client->name);
++
++ /* Register sysfs hooks */
++ if ((err = sysfs_create_group(&client->dev.kobj, &data->attrs)))
++ goto exit_free;
++
++ data->hwmon_dev = hwmon_device_register(&client->dev);
++ if (IS_ERR(data->hwmon_dev)) {
++ err = PTR_ERR(data->hwmon_dev);
++ goto exit_remove;
++ }
++
++ return 0;
++
++exit_remove:
++ sysfs_remove_group(&client->dev.kobj, &data->attrs);
++exit_free:
++ kfree(data);
++exit:
++ return err;
++}
++
++static int gsp_remove(struct i2c_client *client)
++{
++ struct gsp_data *data = i2c_get_clientdata(client);
++ hwmon_device_unregister(data->hwmon_dev);
++ sysfs_remove_group(&client->dev.kobj, &data->attrs);
++ kfree(data);
++ return 0;
++}
++
++static int __init gsp_init(void)
++{
++ return i2c_add_driver(&gsp_driver);
++}
++
++static void __exit gsp_exit(void)
++{
++ i2c_del_driver(&gsp_driver);
++}
++
++module_init(gsp_init);
++module_exit(gsp_exit);
++
++MODULE_AUTHOR("Chris Lang <clang@gateworks.com>");
++MODULE_DESCRIPTION("GSC HWMON driver");
++MODULE_LICENSE("GPL");
++MODULE_VERSION(DRV_VERSION);
++
CONFIG_RTC_DRV_X1205=y
# CONFIG_SCSI_DMA is not set
CONFIG_SENSORS_AD7418=y
+CONFIG_SENSORS_GSC=y
CONFIG_SENSORS_MAX6650=y
CONFIG_SENSORS_W83781D=y
CONFIG_SERIAL_8250_NR_UARTS=4
projects / openwrt / openwrt.git / commitdiff