-/* $Id: uaccess.h,v 1.11 2003/10/13 07:21:20 lethal Exp $
- *
- * User space memory access functions
- *
- * Copyright (C) 1999, 2002 Niibe Yutaka
- * Copyright (C) 2003 Paul Mundt
- *
- * Based on:
- * MIPS implementation version 1.15 by
- * Copyright (C) 1996, 1997, 1998 by Ralf Baechle
- * and i386 version.
- */
-#ifndef __ASM_SH_UACCESS_H
-#define __ASM_SH_UACCESS_H
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-
-#define VERIFY_READ 0
-#define VERIFY_WRITE 1
-
-/*
- * The fs value determines whether argument validity checking should be
- * performed or not. If get_fs() == USER_DS, checking is performed, with
- * get_fs() == KERNEL_DS, checking is bypassed.
- *
- * For historical reasons (Data Segment Register?), these macros are misnamed.
- */
-
-#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
-
-#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFFUL)
-#define USER_DS MAKE_MM_SEG(PAGE_OFFSET)
-
-#define segment_eq(a,b) ((a).seg == (b).seg)
-
-#define get_ds() (KERNEL_DS)
-
-#if !defined(CONFIG_MMU)
-/* NOMMU is always true */
-#define __addr_ok(addr) (1)
-
-static inline mm_segment_t get_fs(void)
-{
- return USER_DS;
-}
-
-static inline void set_fs(mm_segment_t s)
-{
-}
-
-/*
- * __access_ok: Check if address with size is OK or not.
- *
- * If we don't have an MMU (or if its disabled) the only thing we really have
- * to look out for is if the address resides somewhere outside of what
- * available RAM we have.
- *
- * TODO: This check could probably also stand to be restricted somewhat more..
- * though it still does the Right Thing(tm) for the time being.
- */
-static inline int __access_ok(unsigned long addr, unsigned long size)
-{
- return ((addr >= memory_start) && ((addr + size) < memory_end));
-}
-#else /* CONFIG_MMU */
-#define __addr_ok(addr) \
- ((unsigned long)(addr) < (current_thread_info()->addr_limit.seg))
-
-#define get_fs() (current_thread_info()->addr_limit)
-#define set_fs(x) (current_thread_info()->addr_limit = (x))
-
-/*
- * __access_ok: Check if address with size is OK or not.
- *
- * Uhhuh, this needs 33-bit arithmetic. We have a carry..
- *
- * sum := addr + size; carry? --> flag = true;
- * if (sum >= addr_limit) flag = true;
- */
-static inline int __access_ok(unsigned long addr, unsigned long size)
-{
- unsigned long flag, sum;
-
- __asm__("clrt\n\t"
- "addc %3, %1\n\t"
- "movt %0\n\t"
- "cmp/hi %4, %1\n\t"
- "rotcl %0"
- :"=&r" (flag), "=r" (sum)
- :"1" (addr), "r" (size),
- "r" (current_thread_info()->addr_limit.seg)
- :"t");
- return flag == 0;
-
-}
-#endif /* CONFIG_MMU */
-
-static inline int access_ok(int type, const void __user *p, unsigned long size)
-{
- unsigned long addr = (unsigned long)p;
- return __access_ok(addr, size);
-}
-
-/*
- * Uh, these should become the main single-value transfer routines ...
- * They automatically use the right size if we just have the right
- * pointer type ...
- *
- * As SuperH uses the same address space for kernel and user data, we
- * can just do these as direct assignments.
- *
- * Careful to not
- * (a) re-use the arguments for side effects (sizeof is ok)
- * (b) require any knowledge of processes at this stage
- */
-#define put_user(x,ptr) __put_user_check((x),(ptr),sizeof(*(ptr)))
-#define get_user(x,ptr) __get_user_check((x),(ptr),sizeof(*(ptr)))
-
-/*
- * The "__xxx" versions do not do address space checking, useful when
- * doing multiple accesses to the same area (the user has to do the
- * checks by hand with "access_ok()")
- */
-#define __put_user(x,ptr) \
- __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
-#define __get_user(x,ptr) \
- __get_user_nocheck((x),(ptr),sizeof(*(ptr)))
-
-struct __large_struct { unsigned long buf[100]; };
-#define __m(x) (*(struct __large_struct __user *)(x))
-
-#define __get_user_size(x,ptr,size,retval) \
-do { \
- retval = 0; \
- __chk_user_ptr(ptr); \
- switch (size) { \
- case 1: \
- __get_user_asm(x, ptr, retval, "b"); \
- break; \
- case 2: \
- __get_user_asm(x, ptr, retval, "w"); \
- break; \
- case 4: \
- __get_user_asm(x, ptr, retval, "l"); \
- break; \
- default: \
- __get_user_unknown(); \
- break; \
- } \
-} while (0)
-
-#define __get_user_nocheck(x,ptr,size) \
-({ \
- long __gu_err, __gu_val; \
- __get_user_size(__gu_val, (ptr), (size), __gu_err); \
- (x) = (__typeof__(*(ptr)))__gu_val; \
- __gu_err; \
-})
-
-#ifdef CONFIG_MMU
-#define __get_user_check(x,ptr,size) \
-({ \
- long __gu_err, __gu_val; \
- __chk_user_ptr(ptr); \
- switch (size) { \
- case 1: \
- __get_user_1(__gu_val, (ptr), __gu_err); \
- break; \
- case 2: \
- __get_user_2(__gu_val, (ptr), __gu_err); \
- break; \
- case 4: \
- __get_user_4(__gu_val, (ptr), __gu_err); \
- break; \
- default: \
- __get_user_unknown(); \
- break; \
- } \
- \
- (x) = (__typeof__(*(ptr)))__gu_val; \
- __gu_err; \
-})
-
-#define __get_user_1(x,addr,err) ({ \
-__asm__("stc r7_bank, %1\n\t" \
- "mov.l @(8,%1), %1\n\t" \
- "and %2, %1\n\t" \
- "cmp/pz %1\n\t" \
- "bt/s 1f\n\t" \
- " mov #0, %0\n\t" \
- "0:\n" \
- "mov #-14, %0\n\t" \
- "bra 2f\n\t" \
- " mov #0, %1\n" \
- "1:\n\t" \
- "mov.b @%2, %1\n\t" \
- "extu.b %1, %1\n" \
- "2:\n" \
- ".section __ex_table,\"a\"\n\t" \
- ".long 1b, 0b\n\t" \
- ".previous" \
- : "=&r" (err), "=&r" (x) \
- : "r" (addr) \
- : "t"); \
-})
-
-#define __get_user_2(x,addr,err) ({ \
-__asm__("stc r7_bank, %1\n\t" \
- "mov.l @(8,%1), %1\n\t" \
- "and %2, %1\n\t" \
- "cmp/pz %1\n\t" \
- "bt/s 1f\n\t" \
- " mov #0, %0\n\t" \
- "0:\n" \
- "mov #-14, %0\n\t" \
- "bra 2f\n\t" \
- " mov #0, %1\n" \
- "1:\n\t" \
- "mov.w @%2, %1\n\t" \
- "extu.w %1, %1\n" \
- "2:\n" \
- ".section __ex_table,\"a\"\n\t" \
- ".long 1b, 0b\n\t" \
- ".previous" \
- : "=&r" (err), "=&r" (x) \
- : "r" (addr) \
- : "t"); \
-})
-
-#define __get_user_4(x,addr,err) ({ \
-__asm__("stc r7_bank, %1\n\t" \
- "mov.l @(8,%1), %1\n\t" \
- "and %2, %1\n\t" \
- "cmp/pz %1\n\t" \
- "bt/s 1f\n\t" \
- " mov #0, %0\n\t" \
- "0:\n" \
- "mov #-14, %0\n\t" \
- "bra 2f\n\t" \
- " mov #0, %1\n" \
- "1:\n\t" \
- "mov.l @%2, %1\n\t" \
- "2:\n" \
- ".section __ex_table,\"a\"\n\t" \
- ".long 1b, 0b\n\t" \
- ".previous" \
- : "=&r" (err), "=&r" (x) \
- : "r" (addr) \
- : "t"); \
-})
-#else /* CONFIG_MMU */
-#define __get_user_check(x,ptr,size) \
-({ \
- long __gu_err, __gu_val; \
- if (__access_ok((unsigned long)(ptr), (size))) { \
- __get_user_size(__gu_val, (ptr), (size), __gu_err); \
- (x) = (__typeof__(*(ptr)))__gu_val; \
- } else \
- __gu_err = -EFAULT; \
- __gu_err; \
-})
-#endif
-
-#define __get_user_asm(x, addr, err, insn) \
-({ \
-__asm__ __volatile__( \
- "1:\n\t" \
- "mov." insn " %2, %1\n\t" \
- "mov #0, %0\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3:\n\t" \
- "mov #0, %1\n\t" \
- "mov.l 4f, %0\n\t" \
- "jmp @%0\n\t" \
- " mov %3, %0\n" \
- "4: .long 2b\n\t" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n\t" \
- ".long 1b, 3b\n\t" \
- ".previous" \
- :"=&r" (err), "=&r" (x) \
- :"m" (__m(addr)), "i" (-EFAULT)); })
-
-extern void __get_user_unknown(void);
-
-#define __put_user_size(x,ptr,size,retval) \
-do { \
- retval = 0; \
- __chk_user_ptr(ptr); \
- switch (size) { \
- case 1: \
- __put_user_asm(x, ptr, retval, "b"); \
- break; \
- case 2: \
- __put_user_asm(x, ptr, retval, "w"); \
- break; \
- case 4: \
- __put_user_asm(x, ptr, retval, "l"); \
- break; \
- case 8: \
- __put_user_u64(x, ptr, retval); \
- break; \
- default: \
- __put_user_unknown(); \
- } \
-} while (0)
-
-#define __put_user_nocheck(x,ptr,size) \
-({ \
- long __pu_err; \
- __put_user_size((x),(ptr),(size),__pu_err); \
- __pu_err; \
-})
-
-#define __put_user_check(x,ptr,size) \
-({ \
- long __pu_err = -EFAULT; \
- __typeof__(*(ptr)) __user *__pu_addr = (ptr); \
- \
- if (__access_ok((unsigned long)__pu_addr,size)) \
- __put_user_size((x),__pu_addr,(size),__pu_err); \
- __pu_err; \
-})
-
-#define __put_user_asm(x, addr, err, insn) \
-({ \
-__asm__ __volatile__( \
- "1:\n\t" \
- "mov." insn " %1, %2\n\t" \
- "mov #0, %0\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3:\n\t" \
- "nop\n\t" \
- "mov.l 4f, %0\n\t" \
- "jmp @%0\n\t" \
- "mov %3, %0\n" \
- "4: .long 2b\n\t" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n\t" \
- ".long 1b, 3b\n\t" \
- ".previous" \
- :"=&r" (err) \
- :"r" (x), "m" (__m(addr)), "i" (-EFAULT) \
- :"memory"); })
-
-#if defined(__LITTLE_ENDIAN__)
-#define __put_user_u64(val,addr,retval) \
-({ \
-__asm__ __volatile__( \
- "1:\n\t" \
- "mov.l %R1,%2\n\t" \
- "mov.l %S1,%T2\n\t" \
- "mov #0,%0\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3:\n\t" \
- "nop\n\t" \
- "mov.l 4f,%0\n\t" \
- "jmp @%0\n\t" \
- " mov %3,%0\n" \
- "4: .long 2b\n\t" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n\t" \
- ".long 1b, 3b\n\t" \
- ".previous" \
- : "=r" (retval) \
- : "r" (val), "m" (__m(addr)), "i" (-EFAULT) \
- : "memory"); })
+#ifdef CONFIG_SUPERH32
+# include "uaccess_32.h"
#else
-#define __put_user_u64(val,addr,retval) \
-({ \
-__asm__ __volatile__( \
- "1:\n\t" \
- "mov.l %S1,%2\n\t" \
- "mov.l %R1,%T2\n\t" \
- "mov #0,%0\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3:\n\t" \
- "nop\n\t" \
- "mov.l 4f,%0\n\t" \
- "jmp @%0\n\t" \
- " mov %3,%0\n" \
- "4: .long 2b\n\t" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n\t" \
- ".long 1b, 3b\n\t" \
- ".previous" \
- : "=r" (retval) \
- : "r" (val), "m" (__m(addr)), "i" (-EFAULT) \
- : "memory"); })
+# include "uaccess_64.h"
#endif
-
-extern void __put_user_unknown(void);
-
-/* Generic arbitrary sized copy. */
-/* Return the number of bytes NOT copied */
-__kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n);
-
-#define copy_to_user(to,from,n) ({ \
-void *__copy_to = (void *) (to); \
-__kernel_size_t __copy_size = (__kernel_size_t) (n); \
-__kernel_size_t __copy_res; \
-if(__copy_size && __access_ok((unsigned long)__copy_to, __copy_size)) { \
-__copy_res = __copy_user(__copy_to, (void *) (from), __copy_size); \
-} else __copy_res = __copy_size; \
-__copy_res; })
-
-#define copy_from_user(to,from,n) ({ \
-void *__copy_to = (void *) (to); \
-void *__copy_from = (void *) (from); \
-__kernel_size_t __copy_size = (__kernel_size_t) (n); \
-__kernel_size_t __copy_res; \
-if(__copy_size && __access_ok((unsigned long)__copy_from, __copy_size)) { \
-__copy_res = __copy_user(__copy_to, __copy_from, __copy_size); \
-} else __copy_res = __copy_size; \
-__copy_res; })
-
-static __always_inline unsigned long
-__copy_from_user(void *to, const void __user *from, unsigned long n)
-{
- return __copy_user(to, (__force void *)from, n);
-}
-
-static __always_inline unsigned long __must_check
-__copy_to_user(void __user *to, const void *from, unsigned long n)
-{
- return __copy_user((__force void *)to, from, n);
-}
-
-#define __copy_to_user_inatomic __copy_to_user
-#define __copy_from_user_inatomic __copy_from_user
-
-/*
- * Clear the area and return remaining number of bytes
- * (on failure. Usually it's 0.)
- */
-extern __kernel_size_t __clear_user(void *addr, __kernel_size_t size);
-
-#define clear_user(addr,n) ({ \
-void * __cl_addr = (addr); \
-unsigned long __cl_size = (n); \
-if (__cl_size && __access_ok(((unsigned long)(__cl_addr)), __cl_size)) \
-__cl_size = __clear_user(__cl_addr, __cl_size); \
-__cl_size; })
-
-static __inline__ int
-__strncpy_from_user(unsigned long __dest, unsigned long __user __src, int __count)
-{
- __kernel_size_t res;
- unsigned long __dummy, _d, _s;
-
- __asm__ __volatile__(
- "9:\n"
- "mov.b @%2+, %1\n\t"
- "cmp/eq #0, %1\n\t"
- "bt/s 2f\n"
- "1:\n"
- "mov.b %1, @%3\n\t"
- "dt %7\n\t"
- "bf/s 9b\n\t"
- " add #1, %3\n\t"
- "2:\n\t"
- "sub %7, %0\n"
- "3:\n"
- ".section .fixup,\"ax\"\n"
- "4:\n\t"
- "mov.l 5f, %1\n\t"
- "jmp @%1\n\t"
- " mov %8, %0\n\t"
- ".balign 4\n"
- "5: .long 3b\n"
- ".previous\n"
- ".section __ex_table,\"a\"\n"
- " .balign 4\n"
- " .long 9b,4b\n"
- ".previous"
- : "=r" (res), "=&z" (__dummy), "=r" (_s), "=r" (_d)
- : "0" (__count), "2" (__src), "3" (__dest), "r" (__count),
- "i" (-EFAULT)
- : "memory", "t");
-
- return res;
-}
-
-#define strncpy_from_user(dest,src,count) ({ \
-unsigned long __sfu_src = (unsigned long) (src); \
-int __sfu_count = (int) (count); \
-long __sfu_res = -EFAULT; \
-if(__access_ok(__sfu_src, __sfu_count)) { \
-__sfu_res = __strncpy_from_user((unsigned long) (dest), __sfu_src, __sfu_count); \
-} __sfu_res; })
-
-/*
- * Return the size of a string (including the ending 0!)
- */
-static __inline__ long __strnlen_user(const char __user *__s, long __n)
-{
- unsigned long res;
- unsigned long __dummy;
-
- __asm__ __volatile__(
- "9:\n"
- "cmp/eq %4, %0\n\t"
- "bt 2f\n"
- "1:\t"
- "mov.b @(%0,%3), %1\n\t"
- "tst %1, %1\n\t"
- "bf/s 9b\n\t"
- " add #1, %0\n"
- "2:\n"
- ".section .fixup,\"ax\"\n"
- "3:\n\t"
- "mov.l 4f, %1\n\t"
- "jmp @%1\n\t"
- " mov #0, %0\n"
- ".balign 4\n"
- "4: .long 2b\n"
- ".previous\n"
- ".section __ex_table,\"a\"\n"
- " .balign 4\n"
- " .long 1b,3b\n"
- ".previous"
- : "=z" (res), "=&r" (__dummy)
- : "0" (0), "r" (__s), "r" (__n)
- : "t");
- return res;
-}
-
-static __inline__ long strnlen_user(const char __user *s, long n)
-{
- if (!__addr_ok(s))
- return 0;
- else
- return __strnlen_user(s, n);
-}
-
-#define strlen_user(str) strnlen_user(str, ~0UL >> 1)
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue. No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path. This means when everything is well,
- * we don't even have to jump over them. Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry
-{
- unsigned long insn, fixup;
-};
-
-extern int fixup_exception(struct pt_regs *regs);
-
-#endif /* __ASM_SH_UACCESS_H */
--- /dev/null
+/* $Id: uaccess.h,v 1.11 2003/10/13 07:21:20 lethal Exp $
+ *
+ * User space memory access functions
+ *
+ * Copyright (C) 1999, 2002 Niibe Yutaka
+ * Copyright (C) 2003 Paul Mundt
+ *
+ * Based on:
+ * MIPS implementation version 1.15 by
+ * Copyright (C) 1996, 1997, 1998 by Ralf Baechle
+ * and i386 version.
+ */
+#ifndef __ASM_SH_UACCESS_H
+#define __ASM_SH_UACCESS_H
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not. If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons (Data Segment Register?), these macros are misnamed.
+ */
+
+#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
+
+#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFFUL)
+#define USER_DS MAKE_MM_SEG(PAGE_OFFSET)
+
+#define segment_eq(a,b) ((a).seg == (b).seg)
+
+#define get_ds() (KERNEL_DS)
+
+#if !defined(CONFIG_MMU)
+/* NOMMU is always true */
+#define __addr_ok(addr) (1)
+
+static inline mm_segment_t get_fs(void)
+{
+ return USER_DS;
+}
+
+static inline void set_fs(mm_segment_t s)
+{
+}
+
+/*
+ * __access_ok: Check if address with size is OK or not.
+ *
+ * If we don't have an MMU (or if its disabled) the only thing we really have
+ * to look out for is if the address resides somewhere outside of what
+ * available RAM we have.
+ *
+ * TODO: This check could probably also stand to be restricted somewhat more..
+ * though it still does the Right Thing(tm) for the time being.
+ */
+static inline int __access_ok(unsigned long addr, unsigned long size)
+{
+ return ((addr >= memory_start) && ((addr + size) < memory_end));
+}
+#else /* CONFIG_MMU */
+#define __addr_ok(addr) \
+ ((unsigned long)(addr) < (current_thread_info()->addr_limit.seg))
+
+#define get_fs() (current_thread_info()->addr_limit)
+#define set_fs(x) (current_thread_info()->addr_limit = (x))
+
+/*
+ * __access_ok: Check if address with size is OK or not.
+ *
+ * We do three checks:
+ * (1) is it user space?
+ * (2) addr + size --> carry?
+ * (3) addr + size >= 0x80000000 (PAGE_OFFSET)
+ *
+ * (1) (2) (3) | RESULT
+ * 0 0 0 | ok
+ * 0 0 1 | ok
+ * 0 1 0 | bad
+ * 0 1 1 | bad
+ * 1 0 0 | ok
+ * 1 0 1 | bad
+ * 1 1 0 | bad
+ * 1 1 1 | bad
+ */
+static inline int __access_ok(unsigned long addr, unsigned long size)
+{
+ unsigned long flag, tmp;
+
+ __asm__("stc r7_bank, %0\n\t"
+ "mov.l @(8,%0), %0\n\t"
+ "clrt\n\t"
+ "addc %2, %1\n\t"
+ "and %1, %0\n\t"
+ "rotcl %0\n\t"
+ "rotcl %0\n\t"
+ "and #3, %0"
+ : "=&z" (flag), "=r" (tmp)
+ : "r" (addr), "1" (size)
+ : "t");
+
+ return flag == 0;
+}
+#endif /* CONFIG_MMU */
+
+static inline int access_ok(int type, const void __user *p, unsigned long size)
+{
+ unsigned long addr = (unsigned long)p;
+ return __access_ok(addr, size);
+}
+
+/*
+ * Uh, these should become the main single-value transfer routines ...
+ * They automatically use the right size if we just have the right
+ * pointer type ...
+ *
+ * As SuperH uses the same address space for kernel and user data, we
+ * can just do these as direct assignments.
+ *
+ * Careful to not
+ * (a) re-use the arguments for side effects (sizeof is ok)
+ * (b) require any knowledge of processes at this stage
+ */
+#define put_user(x,ptr) __put_user_check((x),(ptr),sizeof(*(ptr)))
+#define get_user(x,ptr) __get_user_check((x),(ptr),sizeof(*(ptr)))
+
+/*
+ * The "__xxx" versions do not do address space checking, useful when
+ * doing multiple accesses to the same area (the user has to do the
+ * checks by hand with "access_ok()")
+ */
+#define __put_user(x,ptr) \
+ __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
+#define __get_user(x,ptr) \
+ __get_user_nocheck((x),(ptr),sizeof(*(ptr)))
+
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) (*(struct __large_struct __user *)(x))
+
+#define __get_user_size(x,ptr,size,retval) \
+do { \
+ retval = 0; \
+ __chk_user_ptr(ptr); \
+ switch (size) { \
+ case 1: \
+ __get_user_asm(x, ptr, retval, "b"); \
+ break; \
+ case 2: \
+ __get_user_asm(x, ptr, retval, "w"); \
+ break; \
+ case 4: \
+ __get_user_asm(x, ptr, retval, "l"); \
+ break; \
+ default: \
+ __get_user_unknown(); \
+ break; \
+ } \
+} while (0)
+
+#define __get_user_nocheck(x,ptr,size) \
+({ \
+ long __gu_err, __gu_val; \
+ __get_user_size(__gu_val, (ptr), (size), __gu_err); \
+ (x) = (__typeof__(*(ptr)))__gu_val; \
+ __gu_err; \
+})
+
+#ifdef CONFIG_MMU
+#define __get_user_check(x,ptr,size) \
+({ \
+ long __gu_err, __gu_val; \
+ __chk_user_ptr(ptr); \
+ switch (size) { \
+ case 1: \
+ __get_user_1(__gu_val, (ptr), __gu_err); \
+ break; \
+ case 2: \
+ __get_user_2(__gu_val, (ptr), __gu_err); \
+ break; \
+ case 4: \
+ __get_user_4(__gu_val, (ptr), __gu_err); \
+ break; \
+ default: \
+ __get_user_unknown(); \
+ break; \
+ } \
+ \
+ (x) = (__typeof__(*(ptr)))__gu_val; \
+ __gu_err; \
+})
+
+#define __get_user_1(x,addr,err) ({ \
+__asm__("stc r7_bank, %1\n\t" \
+ "mov.l @(8,%1), %1\n\t" \
+ "and %2, %1\n\t" \
+ "cmp/pz %1\n\t" \
+ "bt/s 1f\n\t" \
+ " mov #0, %0\n\t" \
+ "0:\n" \
+ "mov #-14, %0\n\t" \
+ "bra 2f\n\t" \
+ " mov #0, %1\n" \
+ "1:\n\t" \
+ "mov.b @%2, %1\n\t" \
+ "extu.b %1, %1\n" \
+ "2:\n" \
+ ".section __ex_table,\"a\"\n\t" \
+ ".long 1b, 0b\n\t" \
+ ".previous" \
+ : "=&r" (err), "=&r" (x) \
+ : "r" (addr) \
+ : "t"); \
+})
+
+#define __get_user_2(x,addr,err) ({ \
+__asm__("stc r7_bank, %1\n\t" \
+ "mov.l @(8,%1), %1\n\t" \
+ "and %2, %1\n\t" \
+ "cmp/pz %1\n\t" \
+ "bt/s 1f\n\t" \
+ " mov #0, %0\n\t" \
+ "0:\n" \
+ "mov #-14, %0\n\t" \
+ "bra 2f\n\t" \
+ " mov #0, %1\n" \
+ "1:\n\t" \
+ "mov.w @%2, %1\n\t" \
+ "extu.w %1, %1\n" \
+ "2:\n" \
+ ".section __ex_table,\"a\"\n\t" \
+ ".long 1b, 0b\n\t" \
+ ".previous" \
+ : "=&r" (err), "=&r" (x) \
+ : "r" (addr) \
+ : "t"); \
+})
+
+#define __get_user_4(x,addr,err) ({ \
+__asm__("stc r7_bank, %1\n\t" \
+ "mov.l @(8,%1), %1\n\t" \
+ "and %2, %1\n\t" \
+ "cmp/pz %1\n\t" \
+ "bt/s 1f\n\t" \
+ " mov #0, %0\n\t" \
+ "0:\n" \
+ "mov #-14, %0\n\t" \
+ "bra 2f\n\t" \
+ " mov #0, %1\n" \
+ "1:\n\t" \
+ "mov.l @%2, %1\n\t" \
+ "2:\n" \
+ ".section __ex_table,\"a\"\n\t" \
+ ".long 1b, 0b\n\t" \
+ ".previous" \
+ : "=&r" (err), "=&r" (x) \
+ : "r" (addr) \
+ : "t"); \
+})
+#else /* CONFIG_MMU */
+#define __get_user_check(x,ptr,size) \
+({ \
+ long __gu_err, __gu_val; \
+ if (__access_ok((unsigned long)(ptr), (size))) { \
+ __get_user_size(__gu_val, (ptr), (size), __gu_err); \
+ (x) = (__typeof__(*(ptr)))__gu_val; \
+ } else \
+ __gu_err = -EFAULT; \
+ __gu_err; \
+})
+#endif
+
+#define __get_user_asm(x, addr, err, insn) \
+({ \
+__asm__ __volatile__( \
+ "1:\n\t" \
+ "mov." insn " %2, %1\n\t" \
+ "mov #0, %0\n" \
+ "2:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "3:\n\t" \
+ "mov #0, %1\n\t" \
+ "mov.l 4f, %0\n\t" \
+ "jmp @%0\n\t" \
+ " mov %3, %0\n" \
+ "4: .long 2b\n\t" \
+ ".previous\n" \
+ ".section __ex_table,\"a\"\n\t" \
+ ".long 1b, 3b\n\t" \
+ ".previous" \
+ :"=&r" (err), "=&r" (x) \
+ :"m" (__m(addr)), "i" (-EFAULT)); })
+
+extern void __get_user_unknown(void);
+
+#define __put_user_size(x,ptr,size,retval) \
+do { \
+ retval = 0; \
+ __chk_user_ptr(ptr); \
+ switch (size) { \
+ case 1: \
+ __put_user_asm(x, ptr, retval, "b"); \
+ break; \
+ case 2: \
+ __put_user_asm(x, ptr, retval, "w"); \
+ break; \
+ case 4: \
+ __put_user_asm(x, ptr, retval, "l"); \
+ break; \
+ case 8: \
+ __put_user_u64(x, ptr, retval); \
+ break; \
+ default: \
+ __put_user_unknown(); \
+ } \
+} while (0)
+
+#define __put_user_nocheck(x,ptr,size) \
+({ \
+ long __pu_err; \
+ __put_user_size((x),(ptr),(size),__pu_err); \
+ __pu_err; \
+})
+
+#define __put_user_check(x,ptr,size) \
+({ \
+ long __pu_err = -EFAULT; \
+ __typeof__(*(ptr)) __user *__pu_addr = (ptr); \
+ \
+ if (__access_ok((unsigned long)__pu_addr,size)) \
+ __put_user_size((x),__pu_addr,(size),__pu_err); \
+ __pu_err; \
+})
+
+#define __put_user_asm(x, addr, err, insn) \
+({ \
+__asm__ __volatile__( \
+ "1:\n\t" \
+ "mov." insn " %1, %2\n\t" \
+ "mov #0, %0\n" \
+ "2:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "3:\n\t" \
+ "nop\n\t" \
+ "mov.l 4f, %0\n\t" \
+ "jmp @%0\n\t" \
+ "mov %3, %0\n" \
+ "4: .long 2b\n\t" \
+ ".previous\n" \
+ ".section __ex_table,\"a\"\n\t" \
+ ".long 1b, 3b\n\t" \
+ ".previous" \
+ :"=&r" (err) \
+ :"r" (x), "m" (__m(addr)), "i" (-EFAULT) \
+ :"memory"); })
+
+#if defined(__LITTLE_ENDIAN__)
+#define __put_user_u64(val,addr,retval) \
+({ \
+__asm__ __volatile__( \
+ "1:\n\t" \
+ "mov.l %R1,%2\n\t" \
+ "mov.l %S1,%T2\n\t" \
+ "mov #0,%0\n" \
+ "2:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "3:\n\t" \
+ "nop\n\t" \
+ "mov.l 4f,%0\n\t" \
+ "jmp @%0\n\t" \
+ " mov %3,%0\n" \
+ "4: .long 2b\n\t" \
+ ".previous\n" \
+ ".section __ex_table,\"a\"\n\t" \
+ ".long 1b, 3b\n\t" \
+ ".previous" \
+ : "=r" (retval) \
+ : "r" (val), "m" (__m(addr)), "i" (-EFAULT) \
+ : "memory"); })
+#else
+#define __put_user_u64(val,addr,retval) \
+({ \
+__asm__ __volatile__( \
+ "1:\n\t" \
+ "mov.l %S1,%2\n\t" \
+ "mov.l %R1,%T2\n\t" \
+ "mov #0,%0\n" \
+ "2:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "3:\n\t" \
+ "nop\n\t" \
+ "mov.l 4f,%0\n\t" \
+ "jmp @%0\n\t" \
+ " mov %3,%0\n" \
+ "4: .long 2b\n\t" \
+ ".previous\n" \
+ ".section __ex_table,\"a\"\n\t" \
+ ".long 1b, 3b\n\t" \
+ ".previous" \
+ : "=r" (retval) \
+ : "r" (val), "m" (__m(addr)), "i" (-EFAULT) \
+ : "memory"); })
+#endif
+
+extern void __put_user_unknown(void);
+
+/* Generic arbitrary sized copy. */
+/* Return the number of bytes NOT copied */
+__kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n);
+
+#define copy_to_user(to,from,n) ({ \
+void *__copy_to = (void *) (to); \
+__kernel_size_t __copy_size = (__kernel_size_t) (n); \
+__kernel_size_t __copy_res; \
+if(__copy_size && __access_ok((unsigned long)__copy_to, __copy_size)) { \
+__copy_res = __copy_user(__copy_to, (void *) (from), __copy_size); \
+} else __copy_res = __copy_size; \
+__copy_res; })
+
+#define copy_from_user(to,from,n) ({ \
+void *__copy_to = (void *) (to); \
+void *__copy_from = (void *) (from); \
+__kernel_size_t __copy_size = (__kernel_size_t) (n); \
+__kernel_size_t __copy_res; \
+if(__copy_size && __access_ok((unsigned long)__copy_from, __copy_size)) { \
+__copy_res = __copy_user(__copy_to, __copy_from, __copy_size); \
+} else __copy_res = __copy_size; \
+__copy_res; })
+
+static __always_inline unsigned long
+__copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+ return __copy_user(to, (__force void *)from, n);
+}
+
+static __always_inline unsigned long __must_check
+__copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+ return __copy_user((__force void *)to, from, n);
+}
+
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+/*
+ * Clear the area and return remaining number of bytes
+ * (on failure. Usually it's 0.)
+ */
+extern __kernel_size_t __clear_user(void *addr, __kernel_size_t size);
+
+#define clear_user(addr,n) ({ \
+void * __cl_addr = (addr); \
+unsigned long __cl_size = (n); \
+if (__cl_size && __access_ok(((unsigned long)(__cl_addr)), __cl_size)) \
+__cl_size = __clear_user(__cl_addr, __cl_size); \
+__cl_size; })
+
+static __inline__ int
+__strncpy_from_user(unsigned long __dest, unsigned long __user __src, int __count)
+{
+ __kernel_size_t res;
+ unsigned long __dummy, _d, _s;
+
+ __asm__ __volatile__(
+ "9:\n"
+ "mov.b @%2+, %1\n\t"
+ "cmp/eq #0, %1\n\t"
+ "bt/s 2f\n"
+ "1:\n"
+ "mov.b %1, @%3\n\t"
+ "dt %7\n\t"
+ "bf/s 9b\n\t"
+ " add #1, %3\n\t"
+ "2:\n\t"
+ "sub %7, %0\n"
+ "3:\n"
+ ".section .fixup,\"ax\"\n"
+ "4:\n\t"
+ "mov.l 5f, %1\n\t"
+ "jmp @%1\n\t"
+ " mov %8, %0\n\t"
+ ".balign 4\n"
+ "5: .long 3b\n"
+ ".previous\n"
+ ".section __ex_table,\"a\"\n"
+ " .balign 4\n"
+ " .long 9b,4b\n"
+ ".previous"
+ : "=r" (res), "=&z" (__dummy), "=r" (_s), "=r" (_d)
+ : "0" (__count), "2" (__src), "3" (__dest), "r" (__count),
+ "i" (-EFAULT)
+ : "memory", "t");
+
+ return res;
+}
+
+#define strncpy_from_user(dest,src,count) ({ \
+unsigned long __sfu_src = (unsigned long) (src); \
+int __sfu_count = (int) (count); \
+long __sfu_res = -EFAULT; \
+if(__access_ok(__sfu_src, __sfu_count)) { \
+__sfu_res = __strncpy_from_user((unsigned long) (dest), __sfu_src, __sfu_count); \
+} __sfu_res; })
+
+/*
+ * Return the size of a string (including the ending 0!)
+ */
+static __inline__ long __strnlen_user(const char __user *__s, long __n)
+{
+ unsigned long res;
+ unsigned long __dummy;
+
+ __asm__ __volatile__(
+ "9:\n"
+ "cmp/eq %4, %0\n\t"
+ "bt 2f\n"
+ "1:\t"
+ "mov.b @(%0,%3), %1\n\t"
+ "tst %1, %1\n\t"
+ "bf/s 9b\n\t"
+ " add #1, %0\n"
+ "2:\n"
+ ".section .fixup,\"ax\"\n"
+ "3:\n\t"
+ "mov.l 4f, %1\n\t"
+ "jmp @%1\n\t"
+ " mov #0, %0\n"
+ ".balign 4\n"
+ "4: .long 2b\n"
+ ".previous\n"
+ ".section __ex_table,\"a\"\n"
+ " .balign 4\n"
+ " .long 1b,3b\n"
+ ".previous"
+ : "=z" (res), "=&r" (__dummy)
+ : "0" (0), "r" (__s), "r" (__n)
+ : "t");
+ return res;
+}
+
+static __inline__ long strnlen_user(const char __user *s, long n)
+{
+ if (!__addr_ok(s))
+ return 0;
+ else
+ return __strnlen_user(s, n);
+}
+
+#define strlen_user(str) strnlen_user(str, ~0UL >> 1)
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue. No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path. This means when everything is well,
+ * we don't even have to jump over them. Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry
+{
+ unsigned long insn, fixup;
+};
+
+extern int fixup_exception(struct pt_regs *regs);
+
+#endif /* __ASM_SH_UACCESS_H */
--- /dev/null
+#ifndef __ASM_SH64_UACCESS_H
+#define __ASM_SH64_UACCESS_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/uaccess.h
+ *
+ * Copyright (C) 2000, 2001 Paolo Alberelli
+ * Copyright (C) 2003, 2004 Paul Mundt
+ *
+ * User space memory access functions
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ *
+ * Based on:
+ * MIPS implementation version 1.15 by
+ * Copyright (C) 1996, 1997, 1998 by Ralf Baechle
+ * and i386 version.
+ *
+ */
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not. If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons (Data Segment Register?), these macros are misnamed.
+ */
+
+#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
+
+#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFF)
+#define USER_DS MAKE_MM_SEG(0x80000000)
+
+#define get_ds() (KERNEL_DS)
+#define get_fs() (current_thread_info()->addr_limit)
+#define set_fs(x) (current_thread_info()->addr_limit=(x))
+
+#define segment_eq(a,b) ((a).seg == (b).seg)
+
+#define __addr_ok(addr) ((unsigned long)(addr) < (current_thread_info()->addr_limit.seg))
+
+/*
+ * Uhhuh, this needs 33-bit arithmetic. We have a carry..
+ *
+ * sum := addr + size; carry? --> flag = true;
+ * if (sum >= addr_limit) flag = true;
+ */
+#define __range_ok(addr,size) (((unsigned long) (addr) + (size) < (current_thread_info()->addr_limit.seg)) ? 0 : 1)
+
+#define access_ok(type,addr,size) (__range_ok(addr,size) == 0)
+#define __access_ok(addr,size) (__range_ok(addr,size) == 0)
+
+/*
+ * Uh, these should become the main single-value transfer routines ...
+ * They automatically use the right size if we just have the right
+ * pointer type ...
+ *
+ * As MIPS uses the same address space for kernel and user data, we
+ * can just do these as direct assignments.
+ *
+ * Careful to not
+ * (a) re-use the arguments for side effects (sizeof is ok)
+ * (b) require any knowledge of processes at this stage
+ */
+#define put_user(x,ptr) __put_user_check((x),(ptr),sizeof(*(ptr)))
+#define get_user(x,ptr) __get_user_check((x),(ptr),sizeof(*(ptr)))
+
+/*
+ * The "__xxx" versions do not do address space checking, useful when
+ * doing multiple accesses to the same area (the user has to do the
+ * checks by hand with "access_ok()")
+ */
+#define __put_user(x,ptr) __put_user_nocheck((x),(ptr),sizeof(*(ptr)))
+#define __get_user(x,ptr) __get_user_nocheck((x),(ptr),sizeof(*(ptr)))
+
+/*
+ * The "xxx_ret" versions return constant specified in third argument, if
+ * something bad happens. These macros can be optimized for the
+ * case of just returning from the function xxx_ret is used.
+ */
+
+#define put_user_ret(x,ptr,ret) ({ \
+if (put_user(x,ptr)) return ret; })
+
+#define get_user_ret(x,ptr,ret) ({ \
+if (get_user(x,ptr)) return ret; })
+
+#define __put_user_ret(x,ptr,ret) ({ \
+if (__put_user(x,ptr)) return ret; })
+
+#define __get_user_ret(x,ptr,ret) ({ \
+if (__get_user(x,ptr)) return ret; })
+
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) (*(struct __large_struct *)(x))
+
+#define __get_user_size(x,ptr,size,retval) \
+do { \
+ retval = 0; \
+ switch (size) { \
+ case 1: \
+ retval = __get_user_asm_b(x, ptr); \
+ break; \
+ case 2: \
+ retval = __get_user_asm_w(x, ptr); \
+ break; \
+ case 4: \
+ retval = __get_user_asm_l(x, ptr); \
+ break; \
+ case 8: \
+ retval = __get_user_asm_q(x, ptr); \
+ break; \
+ default: \
+ __get_user_unknown(); \
+ break; \
+ } \
+} while (0)
+
+#define __get_user_nocheck(x,ptr,size) \
+({ \
+ long __gu_err, __gu_val; \
+ __get_user_size((void *)&__gu_val, (long)(ptr), \
+ (size), __gu_err); \
+ (x) = (__typeof__(*(ptr)))__gu_val; \
+ __gu_err; \
+})
+
+#define __get_user_check(x,ptr,size) \
+({ \
+ long __gu_addr = (long)(ptr); \
+ long __gu_err = -EFAULT, __gu_val; \
+ if (__access_ok(__gu_addr, (size))) \
+ __get_user_size((void *)&__gu_val, __gu_addr, \
+ (size), __gu_err); \
+ (x) = (__typeof__(*(ptr))) __gu_val; \
+ __gu_err; \
+})
+
+extern long __get_user_asm_b(void *, long);
+extern long __get_user_asm_w(void *, long);
+extern long __get_user_asm_l(void *, long);
+extern long __get_user_asm_q(void *, long);
+extern void __get_user_unknown(void);
+
+#define __put_user_size(x,ptr,size,retval) \
+do { \
+ retval = 0; \
+ switch (size) { \
+ case 1: \
+ retval = __put_user_asm_b(x, ptr); \
+ break; \
+ case 2: \
+ retval = __put_user_asm_w(x, ptr); \
+ break; \
+ case 4: \
+ retval = __put_user_asm_l(x, ptr); \
+ break; \
+ case 8: \
+ retval = __put_user_asm_q(x, ptr); \
+ break; \
+ default: \
+ __put_user_unknown(); \
+ } \
+} while (0)
+
+#define __put_user_nocheck(x,ptr,size) \
+({ \
+ long __pu_err; \
+ __typeof__(*(ptr)) __pu_val = (x); \
+ __put_user_size((void *)&__pu_val, (long)(ptr), (size), __pu_err); \
+ __pu_err; \
+})
+
+#define __put_user_check(x,ptr,size) \
+({ \
+ long __pu_err = -EFAULT; \
+ long __pu_addr = (long)(ptr); \
+ __typeof__(*(ptr)) __pu_val = (x); \
+ \
+ if (__access_ok(__pu_addr, (size))) \
+ __put_user_size((void *)&__pu_val, __pu_addr, (size), __pu_err);\
+ __pu_err; \
+})
+
+extern long __put_user_asm_b(void *, long);
+extern long __put_user_asm_w(void *, long);
+extern long __put_user_asm_l(void *, long);
+extern long __put_user_asm_q(void *, long);
+extern void __put_user_unknown(void);
+
+\f
+/* Generic arbitrary sized copy. */
+/* Return the number of bytes NOT copied */
+/* XXX: should be such that: 4byte and the rest. */
+extern __kernel_size_t __copy_user(void *__to, const void *__from, __kernel_size_t __n);
+
+#define copy_to_user(to,from,n) ({ \
+void *__copy_to = (void *) (to); \
+__kernel_size_t __copy_size = (__kernel_size_t) (n); \
+__kernel_size_t __copy_res; \
+if(__copy_size && __access_ok((unsigned long)__copy_to, __copy_size)) { \
+__copy_res = __copy_user(__copy_to, (void *) (from), __copy_size); \
+} else __copy_res = __copy_size; \
+__copy_res; })
+
+#define copy_to_user_ret(to,from,n,retval) ({ \
+if (copy_to_user(to,from,n)) \
+ return retval; \
+})
+
+#define __copy_to_user(to,from,n) \
+ __copy_user((void *)(to), \
+ (void *)(from), n)
+
+#define __copy_to_user_ret(to,from,n,retval) ({ \
+if (__copy_to_user(to,from,n)) \
+ return retval; \
+})
+
+#define copy_from_user(to,from,n) ({ \
+void *__copy_to = (void *) (to); \
+void *__copy_from = (void *) (from); \
+__kernel_size_t __copy_size = (__kernel_size_t) (n); \
+__kernel_size_t __copy_res; \
+if(__copy_size && __access_ok((unsigned long)__copy_from, __copy_size)) { \
+__copy_res = __copy_user(__copy_to, __copy_from, __copy_size); \
+} else __copy_res = __copy_size; \
+__copy_res; })
+
+#define copy_from_user_ret(to,from,n,retval) ({ \
+if (copy_from_user(to,from,n)) \
+ return retval; \
+})
+
+#define __copy_from_user(to,from,n) \
+ __copy_user((void *)(to), \
+ (void *)(from), n)
+
+#define __copy_from_user_ret(to,from,n,retval) ({ \
+if (__copy_from_user(to,from,n)) \
+ return retval; \
+})
+
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+/* XXX: Not sure it works well..
+ should be such that: 4byte clear and the rest. */
+extern __kernel_size_t __clear_user(void *addr, __kernel_size_t size);
+
+#define clear_user(addr,n) ({ \
+void * __cl_addr = (addr); \
+unsigned long __cl_size = (n); \
+if (__cl_size && __access_ok(((unsigned long)(__cl_addr)), __cl_size)) \
+__cl_size = __clear_user(__cl_addr, __cl_size); \
+__cl_size; })
+
+extern int __strncpy_from_user(unsigned long __dest, unsigned long __src, int __count);
+
+#define strncpy_from_user(dest,src,count) ({ \
+unsigned long __sfu_src = (unsigned long) (src); \
+int __sfu_count = (int) (count); \
+long __sfu_res = -EFAULT; \
+if(__access_ok(__sfu_src, __sfu_count)) { \
+__sfu_res = __strncpy_from_user((unsigned long) (dest), __sfu_src, __sfu_count); \
+} __sfu_res; })
+
+#define strlen_user(str) strnlen_user(str, ~0UL >> 1)
+
+/*
+ * Return the size of a string (including the ending 0!)
+ */
+extern long __strnlen_user(const char *__s, long __n);
+
+static inline long strnlen_user(const char *s, long n)
+{
+ if (!__addr_ok(s))
+ return 0;
+ else
+ return __strnlen_user(s, n);
+}
+
+struct exception_table_entry
+{
+ unsigned long insn, fixup;
+};
+
+#define ARCH_HAS_SEARCH_EXTABLE
+
+/* If gcc inlines memset, it will use st.q instructions. Therefore, we need
+ kmalloc allocations to be 8-byte aligned. Without this, the alignment
+ becomes BYTE_PER_WORD i.e. only 4 (since sizeof(long)==sizeof(void*)==4 on
+ sh64 at the moment). */
+#define ARCH_KMALLOC_MINALIGN 8
+
+/*
+ * We want 8-byte alignment for the slab caches as well, otherwise we have
+ * the same BYTES_PER_WORD (sizeof(void *)) min align in kmem_cache_create().
+ */
+#define ARCH_SLAB_MINALIGN 8
+
+/* Returns 0 if exception not found and fixup.unit otherwise. */
+extern unsigned long search_exception_table(unsigned long addr);
+extern const struct exception_table_entry *search_exception_tables (unsigned long addr);
+
+#endif /* __ASM_SH64_UACCESS_H */
+++ /dev/null
-#ifndef __ASM_SH64_UACCESS_H
-#define __ASM_SH64_UACCESS_H
-
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * include/asm-sh64/uaccess.h
- *
- * Copyright (C) 2000, 2001 Paolo Alberelli
- * Copyright (C) 2003, 2004 Paul Mundt
- *
- * User space memory access functions
- *
- * Copyright (C) 1999 Niibe Yutaka
- *
- * Based on:
- * MIPS implementation version 1.15 by
- * Copyright (C) 1996, 1997, 1998 by Ralf Baechle
- * and i386 version.
- *
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-
-#define VERIFY_READ 0
-#define VERIFY_WRITE 1
-
-/*
- * The fs value determines whether argument validity checking should be
- * performed or not. If get_fs() == USER_DS, checking is performed, with
- * get_fs() == KERNEL_DS, checking is bypassed.
- *
- * For historical reasons (Data Segment Register?), these macros are misnamed.
- */
-
-#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
-
-#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFF)
-#define USER_DS MAKE_MM_SEG(0x80000000)
-
-#define get_ds() (KERNEL_DS)
-#define get_fs() (current_thread_info()->addr_limit)
-#define set_fs(x) (current_thread_info()->addr_limit=(x))
-
-#define segment_eq(a,b) ((a).seg == (b).seg)
-
-#define __addr_ok(addr) ((unsigned long)(addr) < (current_thread_info()->addr_limit.seg))
-
-/*
- * Uhhuh, this needs 33-bit arithmetic. We have a carry..
- *
- * sum := addr + size; carry? --> flag = true;
- * if (sum >= addr_limit) flag = true;
- */
-#define __range_ok(addr,size) (((unsigned long) (addr) + (size) < (current_thread_info()->addr_limit.seg)) ? 0 : 1)
-
-#define access_ok(type,addr,size) (__range_ok(addr,size) == 0)
-#define __access_ok(addr,size) (__range_ok(addr,size) == 0)
-
-/*
- * Uh, these should become the main single-value transfer routines ...
- * They automatically use the right size if we just have the right
- * pointer type ...
- *
- * As MIPS uses the same address space for kernel and user data, we
- * can just do these as direct assignments.
- *
- * Careful to not
- * (a) re-use the arguments for side effects (sizeof is ok)
- * (b) require any knowledge of processes at this stage
- */
-#define put_user(x,ptr) __put_user_check((x),(ptr),sizeof(*(ptr)))
-#define get_user(x,ptr) __get_user_check((x),(ptr),sizeof(*(ptr)))
-
-/*
- * The "__xxx" versions do not do address space checking, useful when
- * doing multiple accesses to the same area (the user has to do the
- * checks by hand with "access_ok()")
- */
-#define __put_user(x,ptr) __put_user_nocheck((x),(ptr),sizeof(*(ptr)))
-#define __get_user(x,ptr) __get_user_nocheck((x),(ptr),sizeof(*(ptr)))
-
-/*
- * The "xxx_ret" versions return constant specified in third argument, if
- * something bad happens. These macros can be optimized for the
- * case of just returning from the function xxx_ret is used.
- */
-
-#define put_user_ret(x,ptr,ret) ({ \
-if (put_user(x,ptr)) return ret; })
-
-#define get_user_ret(x,ptr,ret) ({ \
-if (get_user(x,ptr)) return ret; })
-
-#define __put_user_ret(x,ptr,ret) ({ \
-if (__put_user(x,ptr)) return ret; })
-
-#define __get_user_ret(x,ptr,ret) ({ \
-if (__get_user(x,ptr)) return ret; })
-
-struct __large_struct { unsigned long buf[100]; };
-#define __m(x) (*(struct __large_struct *)(x))
-
-#define __get_user_size(x,ptr,size,retval) \
-do { \
- retval = 0; \
- switch (size) { \
- case 1: \
- retval = __get_user_asm_b(x, ptr); \
- break; \
- case 2: \
- retval = __get_user_asm_w(x, ptr); \
- break; \
- case 4: \
- retval = __get_user_asm_l(x, ptr); \
- break; \
- case 8: \
- retval = __get_user_asm_q(x, ptr); \
- break; \
- default: \
- __get_user_unknown(); \
- break; \
- } \
-} while (0)
-
-#define __get_user_nocheck(x,ptr,size) \
-({ \
- long __gu_err, __gu_val; \
- __get_user_size((void *)&__gu_val, (long)(ptr), \
- (size), __gu_err); \
- (x) = (__typeof__(*(ptr)))__gu_val; \
- __gu_err; \
-})
-
-#define __get_user_check(x,ptr,size) \
-({ \
- long __gu_addr = (long)(ptr); \
- long __gu_err = -EFAULT, __gu_val; \
- if (__access_ok(__gu_addr, (size))) \
- __get_user_size((void *)&__gu_val, __gu_addr, \
- (size), __gu_err); \
- (x) = (__typeof__(*(ptr))) __gu_val; \
- __gu_err; \
-})
-
-extern long __get_user_asm_b(void *, long);
-extern long __get_user_asm_w(void *, long);
-extern long __get_user_asm_l(void *, long);
-extern long __get_user_asm_q(void *, long);
-extern void __get_user_unknown(void);
-
-#define __put_user_size(x,ptr,size,retval) \
-do { \
- retval = 0; \
- switch (size) { \
- case 1: \
- retval = __put_user_asm_b(x, ptr); \
- break; \
- case 2: \
- retval = __put_user_asm_w(x, ptr); \
- break; \
- case 4: \
- retval = __put_user_asm_l(x, ptr); \
- break; \
- case 8: \
- retval = __put_user_asm_q(x, ptr); \
- break; \
- default: \
- __put_user_unknown(); \
- } \
-} while (0)
-
-#define __put_user_nocheck(x,ptr,size) \
-({ \
- long __pu_err; \
- __typeof__(*(ptr)) __pu_val = (x); \
- __put_user_size((void *)&__pu_val, (long)(ptr), (size), __pu_err); \
- __pu_err; \
-})
-
-#define __put_user_check(x,ptr,size) \
-({ \
- long __pu_err = -EFAULT; \
- long __pu_addr = (long)(ptr); \
- __typeof__(*(ptr)) __pu_val = (x); \
- \
- if (__access_ok(__pu_addr, (size))) \
- __put_user_size((void *)&__pu_val, __pu_addr, (size), __pu_err);\
- __pu_err; \
-})
-
-extern long __put_user_asm_b(void *, long);
-extern long __put_user_asm_w(void *, long);
-extern long __put_user_asm_l(void *, long);
-extern long __put_user_asm_q(void *, long);
-extern void __put_user_unknown(void);
-
-\f
-/* Generic arbitrary sized copy. */
-/* Return the number of bytes NOT copied */
-/* XXX: should be such that: 4byte and the rest. */
-extern __kernel_size_t __copy_user(void *__to, const void *__from, __kernel_size_t __n);
-
-#define copy_to_user(to,from,n) ({ \
-void *__copy_to = (void *) (to); \
-__kernel_size_t __copy_size = (__kernel_size_t) (n); \
-__kernel_size_t __copy_res; \
-if(__copy_size && __access_ok((unsigned long)__copy_to, __copy_size)) { \
-__copy_res = __copy_user(__copy_to, (void *) (from), __copy_size); \
-} else __copy_res = __copy_size; \
-__copy_res; })
-
-#define copy_to_user_ret(to,from,n,retval) ({ \
-if (copy_to_user(to,from,n)) \
- return retval; \
-})
-
-#define __copy_to_user(to,from,n) \
- __copy_user((void *)(to), \
- (void *)(from), n)
-
-#define __copy_to_user_ret(to,from,n,retval) ({ \
-if (__copy_to_user(to,from,n)) \
- return retval; \
-})
-
-#define copy_from_user(to,from,n) ({ \
-void *__copy_to = (void *) (to); \
-void *__copy_from = (void *) (from); \
-__kernel_size_t __copy_size = (__kernel_size_t) (n); \
-__kernel_size_t __copy_res; \
-if(__copy_size && __access_ok((unsigned long)__copy_from, __copy_size)) { \
-__copy_res = __copy_user(__copy_to, __copy_from, __copy_size); \
-} else __copy_res = __copy_size; \
-__copy_res; })
-
-#define copy_from_user_ret(to,from,n,retval) ({ \
-if (copy_from_user(to,from,n)) \
- return retval; \
-})
-
-#define __copy_from_user(to,from,n) \
- __copy_user((void *)(to), \
- (void *)(from), n)
-
-#define __copy_from_user_ret(to,from,n,retval) ({ \
-if (__copy_from_user(to,from,n)) \
- return retval; \
-})
-
-#define __copy_to_user_inatomic __copy_to_user
-#define __copy_from_user_inatomic __copy_from_user
-
-/* XXX: Not sure it works well..
- should be such that: 4byte clear and the rest. */
-extern __kernel_size_t __clear_user(void *addr, __kernel_size_t size);
-
-#define clear_user(addr,n) ({ \
-void * __cl_addr = (addr); \
-unsigned long __cl_size = (n); \
-if (__cl_size && __access_ok(((unsigned long)(__cl_addr)), __cl_size)) \
-__cl_size = __clear_user(__cl_addr, __cl_size); \
-__cl_size; })
-
-extern int __strncpy_from_user(unsigned long __dest, unsigned long __src, int __count);
-
-#define strncpy_from_user(dest,src,count) ({ \
-unsigned long __sfu_src = (unsigned long) (src); \
-int __sfu_count = (int) (count); \
-long __sfu_res = -EFAULT; \
-if(__access_ok(__sfu_src, __sfu_count)) { \
-__sfu_res = __strncpy_from_user((unsigned long) (dest), __sfu_src, __sfu_count); \
-} __sfu_res; })
-
-#define strlen_user(str) strnlen_user(str, ~0UL >> 1)
-
-/*
- * Return the size of a string (including the ending 0!)
- */
-extern long __strnlen_user(const char *__s, long __n);
-
-static inline long strnlen_user(const char *s, long n)
-{
- if (!__addr_ok(s))
- return 0;
- else
- return __strnlen_user(s, n);
-}
-
-struct exception_table_entry
-{
- unsigned long insn, fixup;
-};
-
-#define ARCH_HAS_SEARCH_EXTABLE
-
-/* If gcc inlines memset, it will use st.q instructions. Therefore, we need
- kmalloc allocations to be 8-byte aligned. Without this, the alignment
- becomes BYTE_PER_WORD i.e. only 4 (since sizeof(long)==sizeof(void*)==4 on
- sh64 at the moment). */
-#define ARCH_KMALLOC_MINALIGN 8
-
-/*
- * We want 8-byte alignment for the slab caches as well, otherwise we have
- * the same BYTES_PER_WORD (sizeof(void *)) min align in kmem_cache_create().
- */
-#define ARCH_SLAB_MINALIGN 8
-
-/* Returns 0 if exception not found and fixup.unit otherwise. */
-extern unsigned long search_exception_table(unsigned long addr);
-extern const struct exception_table_entry *search_exception_tables (unsigned long addr);
-
-#endif /* __ASM_SH64_UACCESS_H */
projects / openwrt / staging / blogic.git / commitdiff