# Please send a mail with your device-specific board files upstream.
# You can find instructions and examples on the linux-wireless wiki:
# <https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles>
-ALLWIFIBOARDS:=engenius_eap1300 linksys_ea6350v3
+ALLWIFIBOARDS:=asus_map-ac2200 engenius_eap1300 linksys_ea6350v3
ALLWIFIPACKAGES:=$(foreach BOARD,$(ALLWIFIBOARDS),ipq-wifi-$(BOARD))
define Package/ipq-wifi-default
endef
#$(eval $(call generate-ipq-wifi-package,<devicename>,<filename>,<displayname>))
+$(eval $(call generate-ipq-wifi-package,asus_map-ac2200,board-map-ac2200.bin,ASUS MAP-AC2200))
$(eval $(call generate-ipq-wifi-package,engenius_eap1300,board-engenius_eap1300.bin,EnGenius EAP1300))
$(eval $(call generate-ipq-wifi-package,linksys_ea6350v3,board-linksys_ea6350v3.bin,Linksys EA6350v3))
8dev,jalapeno)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
;;
+ asus,map-ac2200|\
+ openmesh,a42|\
+ openmesh,a62)
+ ucidef_set_interfaces_lan_wan "eth1" "eth0"
+ ;;
asus,rt-ac58u|\
zyxel,nbg6617)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" \
"0u@eth0" "3:lan" "4:lan"
;;
- openmesh,a42|\
- openmesh,a62)
- ucidef_set_interfaces_lan_wan "eth1" "eth0"
- ;;
*)
echo "Unsupported hardware. Network interfaces not initialized"
;;
;;
"ath10k/pre-cal-pci-0000:01:00.0.bin")
case "$board" in
+ asus,map-ac2200)
+ ath10kcal_ubi_extract "Factory" 36864 12064
+ ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
+ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
+ ;;
openmesh,a62)
ath10kcal_extract "0:ART" 36864 12064
;;
qcom,ap-dk01.1-c1)
ath10kcal_extract "ART" 4096 12064
;;
+ asus,map-ac2200)
+ ath10kcal_ubi_extract "Factory" 4096 12064
+ ;;
asus,rt-ac58u)
CI_UBIPART=UBI_DEV
ath10kcal_ubi_extract "Factory" 4096 12064
qcom,ap-dk01.1-c1)
ath10kcal_extract "ART" 20480 12064
;;
+ asus,map-ac2200)
+ ath10kcal_ubi_extract "Factory" 20480 12064
+ ;;
asus,rt-ac58u)
CI_UBIPART=UBI_DEV
ath10kcal_ubi_extract "Factory" 20480 12064
preinit_set_mac_address() {
case $(board_name) in
+ asus,map-ac2200)
+ base_mac=$(mtd_get_mac_binary_ubi Factory 4102)
+ ip link set dev eth0 address $(macaddr_add "$base_mac" +1)
+ ip link set dev eth1 address $(macaddr_add "$base_mac" +3)
+ ;;
meraki,mr33)
mac_lan=$(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 102)
[ -n "$mac_lan" ] && ip link set dev eth0 address "$mac_lan"
8dev,jalapeno)
nand_do_upgrade "$ARGV"
;;
+ asus,map-ac2200)
+ CI_KERNPART="linux"
+ nand_do_upgrade "$1"
+ ;;
asus,rt-ac58u)
CI_UBIPART="UBI_DEV"
CI_KERNPART="linux"
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_WORK=y
+CONFIG_LEDS_LP5523=y
CONFIG_LEDS_LP5562=y
CONFIG_LEDS_LP55XX_COMMON=y
CONFIG_LIBFDT=y
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/dts-v1/;
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ model = "ASUS Lyra MAP-AC2200";
+ compatible = "asus,map-ac2200";
+
+ aliases {
+ led-boot = &led_blue0;
+ led-failsafe = &led_red0;
+ led-running = &led_blue0;
+ led-upgrade = &led_red0;
+ };
+
+ soc {
+ mdio@90000 {
+ status = "okay";
+ };
+
+ ess-psgmii@98000 {
+ status = "okay";
+ };
+
+ tcsr@1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ ess_tcsr@1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+
+ usb2@60f8800 {
+ status = "okay";
+ };
+
+ crypto@8e3a000 {
+ status = "okay";
+ };
+
+ watchdog@b017000 {
+ status = "okay";
+ };
+
+ ess-switch@c000000 {
+ status = "okay";
+ };
+
+ edma@c080000 {
+ status = "okay";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ reset {
+ label = "reset";
+ gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&nand {
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ nand@0 {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "SBL1";
+ reg = <0x0 0x80000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "MIBIB";
+ reg = <0x80000 0x80000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "QSEE";
+ reg = <0x100000 0x100000>;
+ read-only;
+ };
+
+ partition@200000 {
+ label = "CDT";
+ reg = <0x200000 0x80000>;
+ read-only;
+ };
+
+ partition@280000 {
+ label = "APPSBL";
+ reg = <0x280000 0x140000>;
+ read-only;
+ };
+
+ partition@3c0000 {
+ label = "APPSBLENV";
+ reg = <0x3c0000 0x40000>;
+ read-only;
+ };
+
+ partition@400000 {
+ label = "ubi";
+ reg = <0x400000 0x7c00000>;
+ };
+ };
+ };
+};
+
+&tlmm {
+ i2c_0_pins: i2c_0_pinmux {
+ pinmux {
+ function = "blsp_i2c0";
+ pins = "gpio20", "gpio21";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
+
+ serial_pins: serial_pinmux {
+ mux {
+ pins = "gpio16", "gpio17";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+
+ nand_pins: nand_pins {
+ pullups {
+ pins = "gpio52", "gpio53", "gpio58",
+ "gpio59";
+ function = "qpic";
+ bias-pull-up;
+ };
+
+ pulldowns {
+ pins = "gpio54", "gpio55", "gpio56",
+ "gpio57", "gpio60", "gpio61",
+ "gpio62", "gpio63", "gpio64",
+ "gpio65", "gpio66", "gpio67",
+ "gpio68", "gpio69";
+ function = "qpic";
+ bias-pull-down;
+ };
+ };
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&blsp_dma {
+ status = "okay";
+};
+
+&qpic_bam {
+ status = "okay";
+};
+
+&wifi0 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200";
+};
+
+&wifi1 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200";
+};
+
+&pcie0 {
+ status = "okay";
+ perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
+ wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi2: wifi@1,0 {
+ compatible = "qcom,ath10k";
+ status = "okay";
+ reg = <0x00010000 0 0 0 0>;
+ qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200";
+ };
+ };
+};
+
+&usb2_hs_phy {
+ /* Bluetooth module attached via USB */
+ status = "okay";
+};
+
+&blsp1_i2c3 {
+ pinctrl-0 = <&i2c_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ led-controller@32 {
+ /* 9-channel RGB LED controller */
+ compatible = "national,lp5523";
+ reg = <0x32>;
+ clock-mode = [01];
+
+ led_blue0: blue0 {
+ chan-name = "blue0";
+ label = "map-ac2200:blue:chan0";
+ led-cur = [fa];
+ max-cur = [ff];
+ };
+
+ blue1 {
+ chan-name = "blue1";
+ label = "map-ac2200:blue:chan1";
+ led-cur = [fa];
+ max-cur = [ff];
+ };
+
+ blue2 {
+ chan-name = "blue2";
+ label = "map-ac2200:blue:chan2";
+ led-cur = [fa];
+ max-cur = [ff];
+ };
+
+ led_green0: green0 {
+ chan-name = "green0";
+ label = "map-ac2200:green:chan0";
+ led-cur = [fa];
+ max-cur = [ff];
+ };
+
+ green1 {
+ chan-name = "green1";
+ label = "map-ac2200:green:chan1";
+ led-cur = [fa];
+ max-cur = [ff];
+ };
+
+ green2 {
+ chan-name = "green2";
+ label = "map-ac2200:green:chan2";
+ led-cur = [fa];
+ max-cur = [ff];
+ };
+
+ led_red0: red0 {
+ chan-name = "red0";
+ label = "map-ac2200:red:chan0";
+ led-cur = [fa];
+ max-cur = [ff];
+ };
+
+ red1 {
+ chan-name = "red1";
+ label = "map-ac2200:red:chan1";
+ led-cur = [fa];
+ max-cur = [ff];
+ };
+
+ red2 {
+ chan-name = "red2";
+ label = "map-ac2200:red:chan2";
+ led-cur = [fa];
+ max-cur = [ff];
+ };
+ };
+};
+
+&blsp1_uart1 {
+ pinctrl-0 = <&serial_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/dts-v1/;
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ model = "ASUS Lyra MAP-AC2200";
+ compatible = "asus,map-ac2200";
+
+ aliases {
+ led-boot = &led_blue0;
+ led-failsafe = &led_red0;
+ led-running = &led_blue0;
+ led-upgrade = &led_red0;
+ };
+
+ soc {
+ rng@22000 {
+ status = "okay";
+ };
+
+ mdio@90000 {
+ status = "okay";
+ };
+
+ ess-psgmii@98000 {
+ status = "okay";
+ };
+
+ tcsr@1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ ess_tcsr@1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+
+ usb2@60f8800 {
+ status = "okay";
+ };
+
+ crypto@8e3a000 {
+ status = "okay";
+ };
+
+ watchdog@b017000 {
+ status = "okay";
+ };
+
+ ess-switch@c000000 {
+ status = "okay";
+ };
+
+ edma@c080000 {
+ status = "okay";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&nand {
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ nand@0 {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "SBL1";
+ reg = <0x0 0x80000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "MIBIB";
+ reg = <0x80000 0x80000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "QSEE";
+ reg = <0x100000 0x100000>;
+ read-only;
+ };
+
+ partition@200000 {
+ label = "CDT";
+ reg = <0x200000 0x80000>;
+ read-only;
+ };
+
+ partition@280000 {
+ label = "APPSBL";
+ reg = <0x280000 0x140000>;
+ read-only;
+ };
+
+ partition@3c0000 {
+ label = "APPSBLENV";
+ reg = <0x3c0000 0x40000>;
+ read-only;
+ };
+
+ partition@400000 {
+ label = "ubi";
+ reg = <0x400000 0x7c00000>;
+ };
+ };
+ };
+};
+
+&tlmm {
+ i2c_0_pins: i2c_0_pinmux {
+ pinmux {
+ function = "blsp_i2c0";
+ pins = "gpio20", "gpio21";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
+
+ serial_pins: serial_pinmux {
+ mux {
+ pins = "gpio16", "gpio17";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+
+ nand_pins: nand_pins {
+ pullups {
+ pins = "gpio52", "gpio53", "gpio58",
+ "gpio59";
+ function = "qpic";
+ bias-pull-up;
+ };
+
+ pulldowns {
+ pins = "gpio54", "gpio55", "gpio56",
+ "gpio57", "gpio60", "gpio61",
+ "gpio62", "gpio63", "gpio64",
+ "gpio65", "gpio66", "gpio67",
+ "gpio68", "gpio69";
+ function = "qpic";
+ bias-pull-down;
+ };
+ };
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&blsp_dma {
+ status = "okay";
+};
+
+&qpic_bam {
+ status = "okay";
+};
+
+&wifi0 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200";
+};
+
+&wifi1 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200";
+};
+
+&pcie0 {
+ status = "okay";
+ perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
+ wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi2: wifi@1,0 {
+ compatible = "qcom,ath10k";
+ status = "okay";
+ reg = <0x00010000 0 0 0 0>;
+ qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200";
+ };
+ };
+};
+
+&usb2_hs_phy {
+ /* Bluetooth module attached via USB */
+ status = "okay";
+};
+
+&blsp1_i2c3 {
+ pinctrl-0 = <&i2c_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ led-controller@32 {
+ /* 9-channel RGB LED controller */
+ compatible = "national,lp5523";
+ reg = <0x32>;
+ clock-mode = [01];
+
+ led_blue0: blue0 {
+ chan-name = "blue0";
+ label = "map-ac2200:blue:chan0";
+ led-cur = [fa];
+ max-cur = [ff];
+ };
+
+ blue1 {
+ chan-name = "blue1";
+ label = "map-ac2200:blue:chan1";
+ led-cur = [fa];
+ max-cur = [ff];
+ };
+
+ blue2 {
+ chan-name = "blue2";
+ label = "map-ac2200:blue:chan2";
+ led-cur = [fa];
+ max-cur = [ff];
+ };
+
+ led_green0: green0 {
+ chan-name = "green0";
+ label = "map-ac2200:green:chan0";
+ led-cur = [fa];
+ max-cur = [ff];
+ };
+
+ green1 {
+ chan-name = "green1";
+ label = "map-ac2200:green:chan1";
+ led-cur = [fa];
+ max-cur = [ff];
+ };
+
+ green2 {
+ chan-name = "green2";
+ label = "map-ac2200:green:chan2";
+ led-cur = [fa];
+ max-cur = [ff];
+ };
+
+ led_red0: red0 {
+ chan-name = "red0";
+ label = "map-ac2200:red:chan0";
+ led-cur = [fa];
+ max-cur = [ff];
+ };
+
+ red1 {
+ chan-name = "red1";
+ label = "map-ac2200:red:chan1";
+ led-cur = [fa];
+ max-cur = [ff];
+ };
+
+ red2 {
+ chan-name = "red2";
+ label = "map-ac2200:red:chan2";
+ led-cur = [fa];
+ max-cur = [ff];
+ };
+ };
+};
+
+&blsp1_uart1 {
+ pinctrl-0 = <&serial_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
endef
TARGET_DEVICES += 8dev_jalapeno
+define Device/asus_map-ac2200
+ $(call Device/FitImageLzma)
+ DEVICE_DTS := qcom-ipq4019-map-ac2200
+ DEVICE_TITLE := ASUS Lyra MAP-AC2200
+ IMAGES := sysupgrade.bin
+ DEVICE_PACKAGES := ipq-wifi-asus_map-ac2200 ath10k-firmware-qca9888-ct kmod-ath3k
+endef
+TARGET_DEVICES += asus_map-ac2200
+
define Device/asus_rt-ac58u
$(call Device/FitImageLzma)
DEVICE_DTS := qcom-ipq4018-rt-ac58u
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
-@@ -697,7 +697,22 @@ dtb-$(CONFIG_ARCH_QCOM) += \
+@@ -697,7 +697,23 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8074-dragonboard.dtb \
qcom-apq8084-ifc6540.dtb \
qcom-apq8084-mtp.dtb \
qcom-ipq4019-ap.dk01.1-c1.dtb \
+ qcom-ipq4019-a62.dtb \
+ qcom-ipq4019-ap.dk04.1-c1.dtb \
++ qcom-ipq4019-map-ac2200.dtb \
+ qcom-ipq4028-wpj428.dtb \
+ qcom-ipq4029-gl-b1300.dtb \
+ qcom-ipq4029-mr33.dtb \
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
-@@ -785,11 +785,25 @@ dtb-$(CONFIG_ARCH_QCOM) += \
+@@ -785,11 +785,26 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8074-dragonboard.dtb \
qcom-apq8084-ifc6540.dtb \
qcom-apq8084-mtp.dtb \
qcom-ipq4019-ap.dk07.1-c1.dtb \
qcom-ipq4019-ap.dk07.1-c2.dtb \
+ qcom-ipq4019-a62.dtb \
++ qcom-ipq4019-map-ac2200.dtb \
+ qcom-ipq4028-wpj428.dtb \
+ qcom-ipq4029-gl-b1300.dtb \
+ qcom-ipq4029-mr33.dtb \
projects / openwrt / staging / blogic.git / commitdiff