--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Device Tree file for Buffalo LinkStation LS220DE
+ *
+ * Copyright (C) 2023 Daniel González Cabanelas <dgcbueu@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "armada-370.dtsi"
+#include "mvebu-linkstation-fan.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+ model = "Buffalo LinkStation LS220DE";
+ compatible = "buffalo,ls220de", "marvell,armada370", "marvell,armada-370-xp";
+
+ aliases {
+ led-boot = &led_boot;
+ led-failsafe = &led_failsafe;
+ led-running = &led_power;
+ led-upgrade = &led_upgrade;
+ };
+
+ chosen {
+ bootargs = "earlycon";
+ stdout-path = "serial0:115200n8";
+ append-rootblock = "nullparameter="; /* override the bootloader args */
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>; /* 256 MB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+ MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
+ };
+
+ system_fan: gpio_fan {
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH
+ &gpio0 14 GPIO_ACTIVE_HIGH>;
+ alarm-gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+
+ #cooling-cells = <2>;
+ };
+
+ thermal-zones {
+ hdd-thermal {
+ polling-delay = <20000>;
+ polling-delay-passive = <2000>;
+
+ thermal-sensors = <&hdd0_temp>; /* only one drivetemp sensor is supported */
+
+ trips {
+ hdd_alert1: trip1 {
+ temperature = <34000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+ hdd_alert2: trip2 {
+ temperature = <40000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+ hdd_alert3: trip3 {
+ temperature = <45000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ hdd_hot {
+ temperature = <50000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ hdd_crit {
+ temperature = <60000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map1 {
+ trip = <&hdd_alert1>;
+ cooling-device = <&system_fan THERMAL_NO_LIMIT 1>;
+ };
+ map2 {
+ trip = <&hdd_alert2>;
+ cooling-device = <&system_fan 2 2>;
+ };
+ map3 {
+ trip = <&hdd_alert3>;
+ cooling-device = <&system_fan 3 THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&pmx_buttons>;
+ pinctrl-names = "default";
+
+ power {
+ label = "Power Switch";
+ linux,code = <KEY_POWER>;
+ linux,input-type = <EV_SW>;
+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+ };
+
+ function {
+ label = "Function Button";
+ linux,code = <KEY_CONFIG>;
+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio_leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmx_leds1 &pmx_leds2>;
+
+ indicator_red {
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+ panic-indicator;
+ };
+
+ led_power: power_white {
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ led_failsafe: power_red {
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_upgrade: power_orange {
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
+ gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_boot: indicator_white {
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+ };
+
+ hdd1_red {
+ function = LED_FUNCTION_DISK;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "ata1";
+ function-enumerator = <1>;
+ };
+
+ hdd2_red {
+ function = LED_FUNCTION_DISK;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "ata2";
+ function-enumerator = <2>;
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_power_hdd1 &pmx_power_hdd2>;
+ pinctrl-names = "default";
+
+ sata1_power: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "HDD1";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ startup-delay-us = <2000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ sata2_power: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "HDD2";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ startup-delay-us = <4000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&coherencyfab {
+ broken-idle;
+};
+
+ð1 {
+ pinctrl-0 = <&ge1_rgmii_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ phy-handle = <ðphy0>;
+ phy-connection-type = "rgmii-id";
+};
+
+&mdio {
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+
+ ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */
+ reg = <0>;
+ marvell,reg-init = <0x3 0x10 0xf000 0x091A>, /* LED function */
+ <0x3 0x11 0x0000 0x4401>, /* LED polarity */
+ <0x3 0x12 0x0000 0x4905>; /* LED timer */
+ #thermal-sensor-cells = <0>;
+ };
+};
+
+&nand_controller {
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ label = "pxa3xx_nand-0";
+ nand-rb = <0>;
+ marvell,nand-keep-config;
+ nand-on-flash-bbt;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "ubi_kernel";
+ reg = <0x00000000 0x02000000>; /* 32 MiB */
+ };
+
+ partition@2000000 {
+ label = "ubi";
+ reg = <0x02000000 0x1df00000>; /* 479 MiB */
+ };
+ };
+ };
+};
+
+&sata {
+ nr-ports = <2>;
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdd0_temp: sata-port@0 {
+ reg = <0>;
+ #thermal-sensor-cells = <0>;
+ };
+
+ hdd1_temp: sata-port@1 {
+ reg = <1>;
+ #thermal-sensor-cells = <0>;
+ };
+};
+
+&spi0 {
+ status = "okay";
+ pinctrl-0 = <&spi0_pins2>;
+ pinctrl-names = "default";
+
+ spi-flash@0 {
+ compatible = "mxicy,mx25l8005", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x00000 0xf0000>; /* 960 KiB*/
+ label = "u-boot";
+ read-only;
+ };
+ partition@f0000 {
+ reg = <0xf0000 0x10000>; /* 64 KiB */
+ label = "u-boot-env";
+ };
+ };
+ };
+};
+
+&pmsu {
+ pinctrl-0 = <&pmx_power_cpu>;
+ pinctrl-names = "default";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&pinctrl {
+ pmx_power_hdd2: pmx-power-hdd2 {
+ marvell,pins = "mpp2";
+ marvell,function = "gpio";
+ };
+
+ pmx_power_cpu: pmx-power-cpu {
+ marvell,pins = "mpp4";
+ marvell,function = "vdd";
+ };
+
+ pmx_power_hdd1: pmx-power-hdd1 {
+ marvell,pins = "mpp8";
+ marvell,function = "gpio";
+ };
+
+ pmx_fan_lock: pmx-fan-lock {
+ marvell,pins = "mpp10";
+ marvell,function = "gpio";
+ };
+
+ pmx_hdd_present: pmx-hdd-present {
+ marvell,pins = "mpp11", "mpp12";
+ marvell,function = "gpio";
+ };
+
+ pmx_fan_high: pmx-fan-high {
+ marvell,pins = "mpp13";
+ marvell,function = "gpio";
+ };
+
+ pmx_fan_low: pmx-fan-low {
+ marvell,pins = "mpp14";
+ marvell,function = "gpio";
+ };
+
+ pmx_buttons: pmx-buttons {
+ marvell,pins = "mpp15", "mpp16";
+ marvell,function = "gpio";
+ };
+
+ pmx_leds1: pmx-leds {
+ marvell,pins = "mpp7", "mpp54", "mpp59", "mpp61";
+ marvell,function = "gpo";
+ };
+
+ pmx_leds2: pmx-leds {
+ marvell,pins = "mpp55", "mpp57", "mpp62";
+ marvell,function = "gpio";
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Device Tree file for Buffalo LinkStation LS421DE
+ *
+ * Copyright (C) 2020 Daniel González Cabanelas <dgcbueu@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "armada-370.dtsi"
+#include "mvebu-linkstation-fan.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+ model = "Buffalo LinkStation LS421DE";
+ compatible = "buffalo,ls421de", "marvell,armada370", "marvell,armada-370-xp";
+
+ aliases {
+ led-boot = &led_boot;
+ led-failsafe = &led_failsafe;
+ led-running = &led_power;
+ led-upgrade = &led_upgrade;
+ };
+
+ chosen {
+ bootargs = "earlycon";
+ stdout-path = "serial0:115200n8";
+ append-rootblock = "nullparameter="; /* override the bootloader args */
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>; /* 512 MB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+ MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
+ };
+
+ system_fan: gpio_fan {
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH
+ &gpio0 14 GPIO_ACTIVE_HIGH>;
+ alarm-gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+
+ #cooling-cells = <2>;
+ };
+
+ thermal-zones {
+ hdd-thermal {
+ polling-delay = <20000>;
+ polling-delay-passive = <2000>;
+
+ thermal-sensors = <&hdd0_temp>; /* only one drivetemp sensor is supported */
+
+ trips {
+ hdd_alert1: trip1 {
+ temperature = <36000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+ hdd_alert2: trip2 {
+ temperature = <44000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+ hdd_alert3: trip3 {
+ temperature = <52000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ hdd_crit: trip4 {
+ temperature = <60000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map1 {
+ trip = <&hdd_alert1>;
+ cooling-device = <&system_fan THERMAL_NO_LIMIT 1>;
+ };
+ map2 {
+ trip = <&hdd_alert2>;
+ cooling-device = <&system_fan 2 2>;
+ };
+ map3 {
+ trip = <&hdd_alert3>;
+ cooling-device = <&system_fan 3 THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ ethphy-thermal {
+ polling-delay = <20000>;
+ polling-delay-passive = <2000>;
+
+ thermal-sensors = <ðphy0>;
+
+ trips {
+ ethphy_alert1: trip1 {
+ temperature = <65000>;
+ hysteresis = <4000>;
+ type = "passive";
+ };
+
+ ethphy_crit: trip2 {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map1 {
+ trip = <ðphy_alert1>;
+ cooling-device = <&system_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+
+ };
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&pmx_buttons>;
+ pinctrl-names = "default";
+
+ power {
+ label = "Power Switch";
+ linux,code = <KEY_POWER>;
+ linux,input-type = <EV_SW>;
+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+ };
+
+ function {
+ label = "Function Button";
+ linux,code = <KEY_CONFIG>;
+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio_leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmx_leds1 &pmx_leds2>;
+
+ system_red {
+ label = "ls421de:red:system";
+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_power: power_white {
+ label = "ls421de:white:power";
+ gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ led_failsafe: power_red {
+ label = "ls421de:red:power";
+ gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_upgrade: power_orange {
+ label = "ls421de:orange:power";
+ gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_boot: system_white {
+ label = "ls421de:white:system";
+ gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+ };
+
+ hdd1_red {
+ label = "ls421de:red:hdd1";
+ gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "ata1";
+ };
+
+ hdd2_red {
+ label = "ls421de:red:hdd2";
+ gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "ata2";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_power_usb &pmx_power_hdd1 &pmx_power_hdd2>;
+ pinctrl-names = "default";
+
+ usb_power: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "USB";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ sata1_power: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "HDD1";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ startup-delay-us = <2000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ sata2_power: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "HDD2";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ startup-delay-us = <4000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&coherencyfab {
+ broken-idle;
+};
+
+ð1 {
+ pinctrl-0 = <&ge1_rgmii_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ phy-handle = <ðphy0>;
+ phy-connection-type = "rgmii-id";
+};
+
+&i2c0 {
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+ clock-frequency = <100000>;
+ status = "okay";
+
+ rs5c372a: rs5c372a@32 {
+ compatible = "ricoh,rs5c372a";
+ reg = <0x32>;
+ wakeup-source;
+ };
+};
+
+&mdio {
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+
+ ethphy0: ethernet-phy@0 { /* Marvell 88E1518 */
+ reg = <0>;
+ marvell,reg-init = <0x2 0x10 0xffff 0x0006>, /* disable CLK125 */
+ <0x3 0x10 0x0000 0x1991>, /* LED function */
+ <0x3 0x11 0x0000 0x4401>, /* LED polarity */
+ <0x3 0x12 0x0000 0x4905>; /* LED timer */
+ #thermal-sensor-cells = <0>;
+ };
+};
+
+&pciec {
+ status = "okay";
+ pinctrl-0 = <&pmx_pcie>;
+ pinctrl-names = "default";
+
+ /* Connected to uPD720202 USB 3.0 Host */
+ pcie@1,0 {
+ status = "okay";
+ };
+};
+
+&pmsu {
+ pinctrl-0 = <&pmx_power_cpu>;
+ pinctrl-names = "default";
+};
+
+&rtc {
+ status = "disabled";
+};
+
+&sata {
+ nr-ports = <2>;
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdd0_temp: sata-port@0 {
+ reg = <0>;
+ #thermal-sensor-cells = <0>;
+ };
+
+ hdd1_temp: sata-port@1 {
+ reg = <1>;
+ #thermal-sensor-cells = <0>;
+ };
+};
+
+&sdio {
+ pinctrl-0 = <&sdio_pins2>;
+ pinctrl-names = "default";
+ status = "okay";
+ /* No CD or WP GPIOs */
+ broken-cd;
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&nand_controller {
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ label = "pxa3xx_nand-0";
+ nand-rb = <0>;
+ marvell,nand-keep-config;
+ nand-on-flash-bbt;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "kernel";
+ reg = <0x00000000 0x02000000>; /* 32 MiB */
+ };
+
+ partition@2000000 {
+ label = "ubi";
+ reg = <0x02000000 0x1e000000>; /* 480 MiB */
+ };
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+ pinctrl-0 = <&spi0_pins2>;
+ pinctrl-names = "default";
+
+ spi-flash@0 {
+ compatible = "mxicy,mx25l8005", "jedec,spi-nor";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <50000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x00000 0xf0000>; /* 960 KiB*/
+ label = "u-boot";
+ read-only;
+ };
+ partition@f0000 {
+ reg = <0xf0000 0x10000>; /* 64 KiB */
+ label = "u-boot-env";
+ };
+ };
+ };
+};
+
+&pinctrl {
+ pmx_power_cpu: pmx-power-cpu {
+ marvell,pins = "mpp4";
+ marvell,function = "vdd";
+ };
+
+ pmx_power_usb: pmx-power-usb {
+ marvell,pins = "mpp5";
+ marvell,function = "gpo";
+ };
+
+ pmx_power_hdd1: pmx-power-hdd1 {
+ marvell,pins = "mpp8";
+ marvell,function = "gpio";
+ };
+
+ pmx_power_hdd2: pmx-power-hdd2 {
+ marvell,pins = "mpp9";
+ marvell,function = "gpo";
+ };
+
+ pmx_fan_lock: pmx-fan-lock {
+ marvell,pins = "mpp10";
+ marvell,function = "gpio";
+ };
+
+ pmx_hdd_present: pmx-hdd-present {
+ marvell,pins = "mpp11", "mpp12";
+ marvell,function = "gpio";
+ };
+
+ pmx_fan_high: pmx-fan-high {
+ marvell,pins = "mpp13";
+ marvell,function = "gpio";
+ };
+
+ pmx_fan_low: pmx-fan-low {
+ marvell,pins = "mpp14";
+ marvell,function = "gpio";
+ };
+
+ pmx_buttons: pmx-buttons {
+ marvell,pins = "mpp15", "mpp16";
+ marvell,function = "gpio";
+ };
+
+ pmx_leds1: pmx-leds {
+ marvell,pins = "mpp7", "mpp54", "mpp59", "mpp61";
+ marvell,function = "gpo";
+ };
+
+ pmx_leds2: pmx-leds {
+ marvell,pins = "mpp55", "mpp57", "mpp62";
+ marvell,function = "gpio";
+ };
+
+ pmx_pcie: pmx-pcie {
+ marvell,pins = "mpp56", "mpp60";
+ marvell,function = "pcie";
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Device Tree file for Ctera C200-V2
+ *
+ * Copyright (C) 2021 Pawel Dembicki <paweldembicki@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "armada-370.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "Ctera C200 V2";
+ compatible = "ctera,c200-v2", "marvell,armada370", "marvell,armada-370-xp";
+
+ aliases {
+ led-boot = &led_status_green;
+ led-failsafe = &led_status_red;
+ led-running = &led_status_green;
+ led-upgrade = &led_status_red;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x40000000>; /* 1024 MB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+ MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
+ };
+
+ thermal-zones {
+ ethphy-thermal {
+ polling-delay = <20000>;
+ polling-delay-passive = <2000>;
+
+ thermal-sensors = <ðphy0>;
+
+ trips {
+ ethphy_alert1: trip1 {
+ temperature = <65000>;
+ hysteresis = <4000>;
+ type = "passive";
+ };
+
+ ethphy_crit: trip2 {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&pmx_buttons>;
+ pinctrl-names = "default";
+
+ power {
+ label = "Power Button";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+ };
+
+ reset {
+ label = "Reset Button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+ };
+
+ usb1 {
+ label = "USB1 Button";
+ linux,code = <BTN_0>;
+ gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+ };
+
+ usb2 {
+ label = "USB2 Button";
+ linux,code = <BTN_1>;
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-poweroff {
+ compatible = "gpio-poweroff";
+ pinctrl-0 = <&pmx_poweroff>;
+ pinctrl-names = "default";
+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_leds1 &pmx_leds2>;
+ pinctrl-names = "default";
+
+ led-0 {
+ function = LED_FUNCTION_USB;
+ function-enumerator = <2>;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ };
+
+ led-1 {
+ function = LED_FUNCTION_USB;
+ function-enumerator = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "usbport";
+ trigger-sources = <&usb1_port 1>, <&usb2_port 1>;
+ };
+
+ led-2 {
+ function = LED_FUNCTION_USB;
+ function-enumerator = <1>;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+ };
+
+ led-3 {
+ function = LED_FUNCTION_USB;
+ function-enumerator = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "usbport";
+ trigger-sources = <&usb1_port 2>, <&usb2_port 2>;
+ };
+
+ led-4 {
+ function = LED_FUNCTION_DISK;
+ function-enumerator = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "ata2";
+ };
+
+ led-5 {
+ function = LED_FUNCTION_DISK;
+ function-enumerator = <1>;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
+ };
+
+ led-6 {
+ function = LED_FUNCTION_DISK;
+ function-enumerator = <2>;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+ };
+
+ led-7 {
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_BLUE>;
+ gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-8 {
+ function = LED_FUNCTION_DISK_ERR;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+ };
+
+ led-9 {
+ function = LED_FUNCTION_DISK_ERR;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+ };
+
+ led_status_red: led-10 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+ };
+
+ led-11 {
+ function = LED_FUNCTION_DISK;
+ function-enumerator = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "ata1";
+ };
+
+ led_status_green: led-12 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&coherencyfab {
+ broken-idle;
+};
+
+ð1 {
+ pinctrl-0 = <&ge1_rgmii_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ phy-handle = <ðphy0>;
+ phy-connection-type = "rgmii-id";
+};
+
+&i2c0 {
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+ clock-frequency = <100000>;
+ status = "okay";
+
+ hwmon@2a {
+ compatible = "nuvoton,nct7802";
+ reg = <0x2a>;
+ };
+
+ rtc@30 {
+ compatible = "sii,s35390a";
+ reg = <0x30>;
+ };
+};
+
+&mdio {
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+
+ ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */
+ reg = <0>;
+ #thermal-sensor-cells = <0>;
+ };
+};
+
+&nand_controller {
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ label = "pxa3xx_nand-0";
+ nand-rb = <0>;
+ marvell,nand-keep-config;
+ nand-on-flash-bbt;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0000000 0x200000>;
+ read-only;
+ };
+
+ partition@200000 {
+ label = "certificate";
+ reg = <0x0200000 0x100000>;
+ read-only;
+ };
+
+ partition@300000 {
+ label = "preset_cfg";
+ reg = <0x0300000 0x100000>;
+ read-only;
+ };
+
+ partition@400000 {
+ label = "dev_params";
+ reg = <0x0400000 0x100000>;
+ read-only;
+ };
+ partition@500000 {
+ label = "active_bank";
+ reg = <0x0500000 0x0100000>;
+ };
+
+ partition@600000 {
+ label = "magic";
+ reg = <0x0600000 0x0100000>;
+ read-only;
+ };
+
+ partition@700000 {
+ label = "bank1";
+ reg = <0x0700000 0x2800000>;
+ };
+
+ partition@2f00000 {
+ label = "bank2";
+ reg = <0x2f00000 0x2800000>;
+ };
+
+ /* 0x5700000-0x5a00000 undefined in vendor firmware */
+
+ partition@5a00000 {
+ label = "reserved";
+ reg = <0x5a00000 0x2000000>;
+ };
+
+ partition@7a00000 {
+ label = "ubi";
+ reg = <0x7a00000 0x8600000>;
+ };
+ };
+ };
+};
+
+&pciec {
+ status = "okay";
+
+ pcie@1,0 {
+ pinctrl-0 = <&pmx_pcie>;
+ pinctrl-names = "default";
+ status = "okay";
+ reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+
+ /* -[0000:00]---01.0-[01]----00.0 */
+ /* usbport trigger won't work */
+ bridge@0,1 {
+ compatible = "pci11ab,6710";
+ reg = <0x3800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ usb@1,0 {
+ /* Renesas uPD720202 */
+ compatible = "pci1912,0015";
+ reg = <0x1000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ usb1_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <1>;
+ };
+
+ usb2_port: port@2 {
+ reg = <2>;
+ #trigger-source-cells = <1>;
+ };
+ };
+ };
+ };
+};
+
+&pinctrl {
+ pmx_poweroff: pmx-poweroff {
+ marvell,pins = "mpp7";
+ marvell,function = "gpo";
+ };
+
+ pmx_power_cpu: pmx-power-cpu {
+ marvell,pins = "mpp4";
+ marvell,function = "vdd";
+ };
+
+ pmx_buttons: pmx-buttons {
+ marvell,pins = "mpp6", "mpp10", "mpp14", "mpp32";
+ marvell,function = "gpio";
+ };
+
+ pmx_leds1: pmx-leds1 {
+ marvell,pins = "mpp47";
+ marvell,function = "gpo";
+ };
+
+ pmx_leds2: pmx-leds2 {
+ marvell,pins = "mpp12", "mpp13", "mpp15", "mpp16", "mpp50", "mpp51",
+ "mpp52", "mpp53", "mpp55", "mpp56", "mpp57", "mpp58";
+ marvell,function = "gpio";
+ };
+
+ pmx_pcie: pmx-pcie {
+ marvell,pins = "mpp59";
+ marvell,function = "gpio";
+ };
+
+ /* this gpio is connected to the pin of buzzer
+ * leave it as is due lack of proper driver
+ */
+ pmx_buzzer: pmx-buzzer {
+ marvell,pins = "mpp63";
+ marvell,function = "gpio";
+ };
+};
+
+&pmsu {
+ pinctrl-0 = <&pmx_power_cpu>;
+ pinctrl-names = "default";
+};
+
+&rtc {
+ status = "disabled";
+};
+
+&sata {
+ nr-ports = <2>;
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdd0_temp: sata-port@0 {
+ reg = <0>;
+ #thermal-sensor-cells = <0>;
+ };
+
+ hdd1_temp: sata-port@1 {
+ reg = <1>;
+ #thermal-sensor-cells = <0>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "armada-380.dtsi"
+
+/ {
+ model = "IIJ SA-W2";
+ compatible = "iij,sa-w2", "marvell,armada380";
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_red;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_green;
+ label-mac-device = &ge0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>; /* 256MB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+ pcie {
+ status = "okay";
+
+ pcie@1,0 {
+ status = "okay";
+ };
+
+ pcie@3,0 {
+ status = "okay";
+ };
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmx_keys_pins>;
+
+ button-init {
+ label = "init";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmx_leds_pins>;
+
+ led-0 {
+ gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ led-1 {
+ gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led-2 {
+ gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ };
+
+ led-3 {
+ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_STATUS;
+ };
+
+ led-4 {
+ gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led-5 {
+ gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led-6 {
+ gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ led-7 {
+ gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led_power_green: led-8 {
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led_power_red: led-9 {
+ gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led-10 {
+ gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_GREEN>;
+ linux,default-trigger = "usbport";
+ trigger-sources = <&hub_port2>;
+ };
+
+ led-11 {
+ gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_GREEN>;
+ linux,default-trigger = "usbport";
+ trigger-sources = <&hub_port1>;
+ };
+ };
+
+ regulator-vbus-usb0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vbus-usb0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ regulator-vbus-usb1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vbus-usb1";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+};
+
+&pinctrl {
+ pmx_usb_pins: usb-pins {
+ marvell,pins = "mpp2", /* smsc usb2514b reset */
+ "mpp48", "mpp49", /* port over current */
+ "mpp52", "mpp53"; /* port vbus */
+ marvell,function = "gpio";
+ };
+
+ pmx_keys_pins: keys-pins {
+ marvell,pins = "mpp18";
+ marvell,function = "gpio";
+ };
+
+ pmx_leds_pins: leds-pins {
+ marvell,pins = "mpp19", "mpp20", "mpp33", "mpp34", "mpp35",
+ "mpp36", "mpp44", "mpp45", "mpp46", "mpp47",
+ "mpp54", "mpp55";
+ marvell,function = "gpio";
+ };
+};
+
+&gpio0 {
+ usb-hub-reset {
+ gpio-hog;
+ gpios = <2 GPIO_ACTIVE_HIGH>;
+ output-high;
+ };
+};
+
+&usb0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmx_usb_pins>;
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* SMSC USB2514B on PCB */
+ hub@1 {
+ compatible = "usb424,2514";
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hub_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+
+ hub_port2: port@2 {
+ reg = <2>;
+ #trigger-source-cells = <0>;
+ };
+ };
+};
+
+&bm {
+ status = "okay";
+};
+
+&bm_bppi {
+ status = "okay";
+};
+
+ð1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ge1_rgmii_pins>;
+ status = "okay";
+
+ phy-connection-type = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <2>;
+ bm,pool-short = <3>;
+
+ nvmem-cells = <&macaddr_bdinfo_6 1>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&mdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mdio_pins>;
+ status = "okay";
+
+ /* Marvell 88E6172 */
+ switch@0 {
+ compatible = "marvell,mv88e6085";
+ reg = <0x0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "ge1_0";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "ge1_1";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "ge1_2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "ge1_3";
+ };
+
+ ge0: port@4 {
+ reg = <4>;
+ label = "ge0";
+ nvmem-cells = <&macaddr_bdinfo_6 0>;
+ nvmem-cell-names = "mac-address";
+ };
+
+ /*
+ * eth0 is connected to port5 for WAN connection
+ * on port4 ("GE0")
+ */
+
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <ð1>;
+ phy-connection-type = "rgmii-id";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+};
+
+&rtc {
+ status = "disabled";
+};
+
+&spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x0 0x100000>;
+ label = "bootloader";
+ read-only;
+ };
+
+ partition@100000 {
+ reg = <0x100000 0x10000>;
+ label = "bootloader-env";
+ read-only;
+ };
+
+ partition@110000 {
+ reg = <0x110000 0xf0000>;
+ label = "board_info";
+ read-only;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_bdinfo_6: macaddr@6 {
+ compatible = "mac-base";
+ reg = <0x6 0x6>;
+ #nvmem-cell-cells = <1>;
+ };
+ };
+ };
+
+ partition@200000 {
+ compatible = "iij,seil-firmware";
+ reg = <0x200000 0xf00000>;
+ label = "firmware";
+ iij,bootdev-name = "flash";
+ iij,seil-id = <0x5345494c 0x32303135>;
+ };
+
+ partition@1100000 {
+ compatible = "iij,seil-firmware";
+ reg = <0x1100000 0xf00000>;
+ label = "rescue";
+ iij,bootdev-name = "rescue";
+ iij,seil-id = <0x5345494c 0x32303135>;
+ };
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "armada-385-fortinet-fg-x0e.dtsi"
+
+/ {
+ model = "Fortinet FortiGate 30E";
+ compatible = "fortinet,fg-30e", "marvell,armada385", "marvell,armada380";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x40000000>; /* 1GB */
+ };
+};
+
+&gpio_leds {
+ led-14 {
+ gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_AMBER>;
+ linux,default-trigger = "mv88e6xxx-1:00:100Mbps";
+ };
+
+ led-15 {
+ gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ linux,default-trigger = "mv88e6xxx-1:00:1Gbps";
+ };
+};
+
+&pinctrl {
+ pmx_switch_pins: switch-pins {
+ marvell,pins = "mpp19";
+ marvell,function = "gpio";
+ };
+};
+
+&mdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mdio_pins>, <&pmx_switch_pins>;
+
+ /* Marvell 88E6176 */
+ switch@2 {
+ compatible = "marvell,mv88e6085";
+ reg = <0x2>;
+ reset-gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "wan";
+ nvmem-cells = <&macaddr_bdinfo_d880 1>;
+ nvmem-cell-names = "mac-address";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan4";
+ nvmem-cells = <&macaddr_bdinfo_d880 5>;
+ nvmem-cell-names = "mac-address";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+ nvmem-cells = <&macaddr_bdinfo_d880 4>;
+ nvmem-cell-names = "mac-address";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan2";
+ nvmem-cells = <&macaddr_bdinfo_d880 3>;
+ nvmem-cell-names = "mac-address";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan1";
+ nvmem-cells = <&macaddr_bdinfo_d880 2>;
+ nvmem-cell-names = "mac-address";
+ };
+
+ port@6 {
+ reg = <6>;
+ ethernet = <ð0>;
+ phy-connection-type = "rgmii-id";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "armada-385-fortinet-fg-x0e.dtsi"
+
+/ {
+ model = "Fortinet FortiGate 50E";
+ compatible = "fortinet,fg-50e", "marvell,armada385", "marvell,armada380";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x80000000>; /* 2GB */
+ };
+};
+
+&gpio_leds {
+ led-14 {
+ gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ linux,default-trigger = "f1072004.mdio-mii:00:1Gbps";
+ };
+
+ led-15 {
+ gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ linux,default-trigger = "f1072004.mdio-mii:01:1Gbps";
+ };
+
+ led-16 {
+ gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_AMBER>;
+ linux,default-trigger = "mv88e6xxx-1:00:100Mbps";
+ };
+
+ led-17 {
+ gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ linux,default-trigger = "mv88e6xxx-1:00:1Gbps";
+ };
+};
+
+&pinctrl {
+ pmx_phy_switch_pins: phy-switch-pins {
+ marvell,pins = "mpp19", "mpp20", "mpp23", "mpp34", "mpp41";
+ marvell,function = "gpio";
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ phy-handle = <ðphy0>;
+ phy-connection-type = "sgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <2>;
+ nvmem-cells = <&macaddr_bdinfo_d880 1>;
+ nvmem-cell-names = "mac-address";
+};
+
+ð2 {
+ status = "okay";
+
+ phy-handle = <ðphy1>;
+ phy-connection-type = "sgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <3>;
+ nvmem-cells = <&macaddr_bdinfo_d880 2>;
+ nvmem-cell-names = "mac-address";
+};
+
+&mdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mdio_pins>, <&pmx_phy_switch_pins>;
+
+ /* Marvell 88E1512 */
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-id0141,0dd1",
+ "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <10000>;
+ /*
+ * LINK/ACT (Green): LED[0], Active Low
+ * SPEED 100M (Amber): LED[1], Active High
+ */
+ marvell,reg-init = <3 16 0 0x71>,
+ <3 17 0 0x4>;
+ };
+
+ /* Marvell 88E1512 */
+ ethphy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-id0141,0dd1",
+ "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <10000>;
+ /*
+ * LINK/ACT (Green): LED[0], Active Low
+ * SPEED 100M (Amber): LED[1], Active High
+ */
+ marvell,reg-init = <3 16 0 0x71>,
+ <3 17 0 0x4>;
+ };
+
+ /* Marvell 88E6176 */
+ switch@2 {
+ compatible = "marvell,mv88e6085";
+ reg = <0x2>;
+ reset-gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan5";
+ nvmem-cells = <&macaddr_bdinfo_d880 7>;
+ nvmem-cell-names = "mac-address";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan4";
+ nvmem-cells = <&macaddr_bdinfo_d880 6>;
+ nvmem-cell-names = "mac-address";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+ nvmem-cells = <&macaddr_bdinfo_d880 5>;
+ nvmem-cell-names = "mac-address";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan2";
+ nvmem-cells = <&macaddr_bdinfo_d880 4>;
+ nvmem-cell-names = "mac-address";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan1";
+ nvmem-cells = <&macaddr_bdinfo_d880 3>;
+ nvmem-cell-names = "mac-address";
+ };
+
+ port@6 {
+ reg = <6>;
+ ethernet = <ð0>;
+ phy-connection-type = "rgmii-id";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "armada-385.dtsi"
+
+/ {
+ aliases {
+ led-boot = &led_status_green;
+ led-failsafe = &led_status_red;
+ led-running = &led_status_green;
+ led-upgrade = &led_status_green;
+ label-mac-device = ð0;
+ };
+
+ chosen {
+ stdout-path = "serial0:9600n8";
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmx_gpio_keys_pins>;
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio_leds: gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmx_gpio_leds_pins>;
+
+ led-0 {
+ gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_ALARM;
+ };
+
+ led-1 {
+ gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led_status_green: led-2 {
+ gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ };
+
+ led-3 {
+ gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led-4 {
+ gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_AMBER>;
+ function = LED_FUNCTION_ALARM;
+ };
+
+ led_status_red: led-5 {
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_STATUS;
+ };
+
+ led-6 {
+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_GREEN>;
+ linux,default-trigger = "mv88e6xxx-1:01:1Gbps";
+ };
+
+ led-7 {
+ gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_AMBER>;
+ linux,default-trigger = "mv88e6xxx-1:01:100Mbps";
+ };
+
+ led-8 {
+ gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_AMBER>;
+ linux,default-trigger = "mv88e6xxx-1:02:100Mbps";
+ };
+
+ led-9 {
+ gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_GREEN>;
+ linux,default-trigger = "mv88e6xxx-1:02:1Gbps";
+ };
+
+ led-10 {
+ gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_GREEN>;
+ linux,default-trigger = "mv88e6xxx-1:04:1Gbps";
+ };
+
+ led-11 {
+ gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_AMBER>;
+ linux,default-trigger = "mv88e6xxx-1:04:100Mbps";
+ };
+
+ led-12 {
+ gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_GREEN>;
+ linux,default-trigger = "mv88e6xxx-1:03:1Gbps";
+ };
+
+ led-13 {
+ gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_AMBER>;
+ linux,default-trigger = "mv88e6xxx-1:03:100Mbps";
+ };
+ };
+
+ reg_usb_vbus: regulator-usb-vbus {
+ compatible = "fixed-regulator";
+ regulator-name = "usb-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 21 GPIO_ACTIVE_LOW>;
+ regulator-always-on;
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ status = "okay";
+
+ gpio2: gpio@24 {
+ compatible = "nxp,pca9555";
+ reg = <0x24>;
+ gpio-controller;
+ #gpio-cells = <0x2>;
+ };
+
+ hwmon@28 {
+ compatible = "nuvoton,nct7802";
+ reg = <0x28>;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+};
+
+&pinctrl {
+ pmx_gpio_leds_pins: gpio-leds-pins {
+ marvell,pins = "mpp30", "mpp32", "mpp33", "mpp35",
+ "mpp45", "mpp47";
+ marvell,function = "gpio";
+ };
+
+ pmx_usb_pins: usb-pins {
+ marvell,pins = "mpp53";
+ marvell,function = "gpio";
+ };
+
+ pmx_gpio_keys_pins: gpio-keys-pins {
+ marvell,pins = "mpp54";
+ marvell,function = "gpio";
+ };
+};
+
+&bm {
+ status = "okay";
+};
+
+&bm_bppi {
+ status = "okay";
+};
+
+ð0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ge0_rgmii_pins>;
+ status = "okay";
+
+ phy-connection-type = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <0>;
+ bm,pool-short = <1>;
+ nvmem-cells = <&macaddr_bdinfo_d880 0>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&usb3_0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmx_usb_pins>;
+ status = "okay";
+
+ vbus-supply = <®_usb_vbus>;
+};
+
+&spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x0 0x1c0000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ partition@1c0000 {
+ reg = <0x1c0000 0x10000>;
+ label = "firmware-info";
+
+ /*
+ * 0x10 - 0x2f : image name (image1)
+ * 0x30 - 0x4f : image name (image2)
+ * 0x170 (1byte): active image (0x0/0x1)
+ * 0x184 - 0x185: kernel block count (image1)
+ * 0x18c - 0x18d: rootfs block count (image1)
+ * 0x194 - 0x195: kernel block count (image2)
+ * 0x19c - 0x19d: rootfs block count (image2)
+ * 0x1be (1byte): bit7 -> active flag (image1)?
+ * 0x1ce (1byte): bit7 -> active flag (image2)?
+ *
+ * Note: block size --> 0x200 (512 bytes)
+ */
+ };
+
+ partition@1d0000 {
+ reg = <0x1d0000 0x10000>;
+ label = "dtb";
+ read-only;
+ };
+
+ partition@1e0000 {
+ reg = <0x1e0000 0x10000>;
+ label = "u-boot-env";
+ read-only;
+ };
+
+ partition@1f0000 {
+ reg = <0x1f0000 0x10000>;
+ label = "board-info";
+ read-only;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_bdinfo_d880: macaddr@d880 {
+ compatible = "mac-base";
+ reg = <0xd880 0x6>;
+ #nvmem-cell-cells = <1>;
+ };
+ };
+ };
+
+ partition@200000 {
+ reg = <0x200000 0x600000>;
+ label = "kernel";
+ };
+
+ partition@800000 {
+ reg = <0x800000 0x1800000>;
+ label = "rootfs";
+ };
+
+ partition@2000000 {
+ reg = <0x2000000 0x600000>;
+ label = "kn2";
+ read-only;
+ };
+
+ partition@2600000 {
+ reg = <0x2600000 0x1800000>;
+ label = "rfs2";
+ read-only;
+ };
+
+ partition@3e00000 {
+ reg = <0x3e00000 0x1200000>;
+ label = "part1";
+ read-only;
+ };
+
+ partition@5000000 {
+ reg = <0x5000000 0x1200000>;
+ label = "part2";
+ read-only;
+ };
+
+ partition@6200000 {
+ reg = <0x6200000 0x1e00000>;
+ label = "config";
+ read-only;
+ };
+ };
+ };
+};
--- /dev/null
+/*
+ * Device Tree file for the Linksys WRT32X (Venom)
+ *
+ * Copyright (C) 2017 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "armada-385-linksys.dtsi"
+
+/ {
+ model = "Linksys WRT32X";
+ compatible = "linksys,wrt32x", "linksys,venom", "linksys,armada385",
+ "marvell,armada385", "marvell,armada380";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = "serial0:115200n8";
+ append-rootblock = "root=/dev/mtdblock";
+ };
+};
+
+&expander0 {
+ wan_amber@0 {
+ label = "venom:amber:wan";
+ reg = <0x0>;
+ };
+
+ wan_blue@1 {
+ label = "venom:blue:wan";
+ reg = <0x1>;
+ };
+
+ usb2@5 {
+ label = "venom:blue:usb2";
+ reg = <0x5>;
+ };
+
+ usb3_1@6 {
+ label = "venom:blue:usb3_1";
+ reg = <0x6>;
+ };
+
+ usb3_2@7 {
+ label = "venom:blue:usb3_2";
+ reg = <0x7>;
+ };
+
+ wps_blue@8 {
+ label = "venom:blue:wps";
+ reg = <0x8>;
+ };
+
+ wps_amber@9 {
+ label = "venom:amber:wps";
+ reg = <0x9>;
+ };
+};
+
+&gpio_leds {
+ power {
+ gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+ label = "venom:blue:power";
+ };
+
+ sata {
+ gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+ label = "venom:blue:sata";
+ };
+
+ wlan_2g {
+ gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+ label = "venom:blue:wlan_2g";
+ };
+
+ wlan_5g {
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ label = "venom:blue:wlan_5g";
+ };
+};
+
+&gpio_leds_pins {
+ marvell,pins = "mpp21", "mpp45", "mpp46", "mpp56";
+};
+
+&nand {
+ /* Spansion S34ML02G2 256MiB, OEM Layout */
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0000000 0x200000>; /* 2MB */
+ read-only;
+ };
+
+ partition@200000 {
+ label = "u_env";
+ reg = <0x200000 0x20000>; /* 128KB */
+ };
+
+ partition@220000 {
+ label = "s_env";
+ reg = <0x220000 0x40000>; /* 256KB */
+ };
+
+ partition@180000 {
+ label = "unused_area";
+ reg = <0x260000 0x5c0000>; /* 5.75MB */
+ };
+
+ partition@7e0000 {
+ label = "devinfo";
+ reg = <0x7e0000 0x40000>; /* 256KB */
+ read-only;
+ };
+
+ /* kernel1 overlaps with rootfs1 by design */
+ partition@900000 {
+ label = "kernel1";
+ reg = <0x900000 0x7b00000>; /* 123MB */
+ };
+
+ partition@f00000 {
+ label = "rootfs1";
+ reg = <0xf00000 0x7500000>; /* 117MB */
+ };
+
+ /* kernel2 overlaps with rootfs2 by design */
+ partition@8400000 {
+ label = "kernel2";
+ reg = <0x8400000 0x7b00000>; /* 123MB */
+ };
+
+ partition@8a00000 {
+ label = "rootfs2";
+ reg = <0x8a00000 0x7500000>; /* 117MB */
+ };
+
+ /* last MB is for the BBT, not writable */
+ partition@ff00000 {
+ label = "BBT";
+ reg = <0xff00000 0x100000>;
+ };
+ };
+};
+
+
+&pcie1 {
+ mwlwifi {
+ marvell,chainmask = <4 4>;
+ };
+};
+
+&pcie2 {
+ mwlwifi {
+ marvell,chainmask = <4 4>;
+ };
+};
+
+&sdhci {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhci_pins>;
+ no-1-8-v;
+ non-removable;
+ wp-inverted;
+ bus-width = <8>;
+ status = "okay";
+};
+
+&usb3_1_vbus {
+ gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_1_vbus_pins {
+ marvell,pins = "mpp44";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Device Tree file for ipTIME NAS1dual
+ *
+ * Copyright (C) 2020 Sungbo Eo <mans0n@gorani.run>
+ *
+ * Based on armada-385-linksys.dtsi
+ * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "armada-385.dtsi"
+
+/ {
+ model = "ipTIME NAS1dual";
+ compatible = "iptime,nas1dual", "marvell,armada385", "marvell,armada380";
+
+ aliases {
+ led-boot = &led_ready;
+ led-failsafe = &led_ready;
+ led-running = &led_ready;
+ led-upgrade = &led_ready;
+ label-mac-device = ð0;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x80000000>; /* 2GB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_pins>;
+
+ power {
+ label = "Power Button";
+ linux,input-type = <EV_SW>;
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+ };
+
+ reset {
+ label = "Reset Button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+ };
+
+ copy {
+ label = "USB Copy Button";
+ linux,code = <KEY_COPY>;
+ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_leds_pins>;
+
+ led_ready: ready {
+ label = "blue:ready";
+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd {
+ label = "blue:hdd";
+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "disk-activity";
+ };
+
+ usb {
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_BLUE>;
+ gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+ trigger-sources = <&usb3_0_port1 &usb3_0_port2>;
+ linux,default-trigger = "usbport";
+ };
+ };
+
+ gpio-fan {
+ compatible = "gpio-fan";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_fan_pins>;
+ gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>,
+ <&gpio1 18 GPIO_ACTIVE_HIGH>;
+ /* We don't know the exact rpm, just use dummy values here. */
+ gpio-fan,speed-map = <0 0>, <1 1>, <2 2>;
+ #cooling-cells = <2>;
+ };
+
+ gpio-poweroff {
+ compatible = "gpio-poweroff";
+ gpios = <&pca9536 1 GPIO_ACTIVE_LOW>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sata_power_pins>;
+
+ reg_sata_power: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "sata-power";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ gpio = <&gpio1 20 GPIO_ACTIVE_LOW>;
+ regulator-always-on;
+ };
+ };
+};
+
+&ahci0 {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sata-port@0 {
+ reg = <0>;
+ target-supply = <®_sata_power>;
+ #thermal-sensor-cells = <0>;
+ };
+};
+
+&bm {
+ status = "okay";
+};
+
+&bm_bppi {
+ status = "okay";
+};
+
+ð0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ge0_rgmii_pins>;
+ status = "okay";
+ phy-handle = <ðphy1>;
+ phy-connection-type = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <0>;
+ bm,pool-short = <1>;
+ nvmem-cells = <&macaddr_uboot_fffa8>;
+ nvmem-cell-names = "mac-address";
+};
+
+ð1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ge1_rgmii_pins>;
+ status = "okay";
+ phy-handle = <ðphy0>;
+ phy-connection-type = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <2>;
+ bm,pool-short = <3>;
+ nvmem-cells = <&macaddr_uboot_fffa8>;
+ nvmem-cell-names = "mac-address";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ status = "okay";
+
+ pca9536: gpio@41 {
+ compatible = "nxp,pca9536";
+ reg = <0x41>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "power-led", "power-board";
+ };
+};
+
+&mdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mdio_pins>;
+
+ /* LED1: On - Link, Blink - Activity, Off - No Link */
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ marvell,reg-init = <3 16 0 0x1017>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ marvell,reg-init = <3 16 0 0x1017>;
+ };
+};
+
+&pinctrl {
+ gpio_keys_pins: gpio-keys-pins {
+ marvell,pins = "mpp24", "mpp26", "mpp48";
+ marvell,function = "gpio";
+ };
+
+ gpio_leds_pins: gpio-leds-pins {
+ marvell,pins = "mpp18", "mpp20", "mpp51";
+ marvell,function = "gpio";
+ };
+
+ gpio_fan_pins: gpio-fan-pins {
+ marvell,pins = "mpp25", "mpp50";
+ marvell,function = "gpio";
+ };
+
+ sata_power_pins: sata-power-pins {
+ marvell,pins = "mpp52";
+ marvell,function = "gpio";
+ };
+
+ uart1_pins_alt: uart-pins-1-alt {
+ marvell,pins = "mpp45", "mpp46";
+ marvell,function = "ua1";
+ };
+};
+
+&spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x00000000 0x00100000>;
+ label = "u-boot";
+ read-only;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_uboot_fffa8: macaddr@fffa8 {
+ reg = <0xfffa8 0x6>;
+ };
+ };
+ };
+
+ partition@100000 {
+ reg = <0x00100000 0x03ec0000>;
+ label = "firmware";
+
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x00000000 0x00600000>;
+ label = "kernel";
+ };
+
+ partition@600000 {
+ reg = <0x00600000 0x038c0000>;
+ label = "rootfs";
+ };
+ };
+
+ partition@3fc0000 {
+ reg = <0x03fc0000 0x00040000>;
+ label = "config";
+ read-only;
+ };
+ };
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins_alt>;
+ status = "okay";
+};
+
+&usb3_0 {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb3_0_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+
+ usb3_0_port2: port@2 {
+ reg = <2>;
+ #trigger-source-cells = <0>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "armada-3720-uDPU.dtsi"
+
+/ {
+ model = "Methode eDPU Board";
+ compatible = "methode,edpu", "marvell,armada3720", "marvell,armada3710";
+};
+
+/* PHY mode is set to 1000Base-X despite Maxlinear IC being capable of
+ * 2500Base-X since until 5.15 support for mvebu is available trying to
+ * use 2500Base-X will cause buffer overruns for which the fix is not
+ * easily backportable.
+ */
+ð0 {
+ phy-mode = "1000base-x";
+};
+
+/*
+ * External MV88E6361 switch is only available on v2 of the board.
+ * U-Boot will enable the MDIO bus and switch nodes.
+ */
+&mdio {
+ status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&smi_pins>;
+
+ /* Actual device is MV88E6361 */
+ switch: switch@0 {
+ compatible = "marvell,mv88e6190";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "cpu";
+ phy-mode = "2500base-x";
+ managed = "in-band-status";
+ ethernet = <ð0>;
+ };
+
+ port@9 {
+ reg = <9>;
+ label = "downlink";
+ phy-mode = "2500base-x";
+ managed = "in-band-status";
+ };
+
+ port@a {
+ reg = <10>;
+ label = "uplink";
+ phy-mode = "2500base-x";
+ managed = "in-band-status";
+ sfp = <&sfp_eth1>;
+ };
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for ESPRESSObin-Ultra
+ * Copyright (C) 2019 Globalscale technologies, Inc.
+ *
+ * Jason Hung <jhung@globalscaletechnologies.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-372x.dtsi"
+
+/ {
+ model = "Globalscale Marvell ESPRESSOBin Ultra Board";
+ compatible = "globalscale,espressobin-ultra", "marvell,armada3720",
+ "marvell,armada3710";
+
+ aliases {
+ /* for dsa slave device */
+ ethernet1 = &switch0port1;
+ ethernet2 = &switch0port2;
+ ethernet3 = &switch0port3;
+ ethernet4 = &switch0port4;
+ ethernet5 = &switch0port5;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+ };
+
+ reg_usb3_vbus: usb3-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb3-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpionb 19 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb3_phy: usb3-phy {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <®_usb3_vbus>;
+ };
+
+ leds {
+ pinctrl-names = "default";
+ compatible = "gpio-leds";
+ /* No assigned functions to the LEDs by default */
+ led1 {
+ label = "ebin-ultra:blue:led1";
+ gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
+ };
+ led2 {
+ label = "ebin-ultra:green:led2";
+ gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
+ };
+ led3 {
+ label = "ebin-ultra:red:led3";
+ gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
+ };
+ led4 {
+ label = "ebin-ultra:yellow:led4";
+ gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&sdhci0 {
+ status = "okay";
+ non-removable;
+ bus-width = <8>;
+ mmc-ddr-1_8v;
+ mmc-hs400-1_8v;
+ marvell,pad-type = "fixed-1-8v";
+};
+
+&spi0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_quad_pins>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <108000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "firmware";
+ reg = <0x0 0x3e0000>;
+ };
+ partition@3e0000 {
+ label = "hw-info";
+ reg = <0x3e0000 0x10000>;
+ read-only;
+ };
+ partition@3f0000 {
+ label = "u-boot-env";
+ reg = <0x3f0000 0x10000>;
+ };
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+};
+
+&i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+
+ clock-frequency = <100000>;
+
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+&usb3 {
+ status = "okay";
+ usb-phy = <&usb3_phy>;
+};
+
+&usb2 {
+ status = "okay";
+};
+
+ð0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ phy-mode = "rgmii-id";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ extphy: ethernet-phy@0 {
+ reg = <1>;
+ };
+
+ switch0: switch0@1 {
+ compatible = "marvell,mv88e6085";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ dsa,member = <0 0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch0port0: port@0 {
+ reg = <0>;
+ ethernet = <ð0>;
+ };
+
+ switch0port1: port@1 {
+ reg = <1>;
+ label = "lan0";
+ phy-handle = <&switch0phy1>;
+ };
+
+ switch0port2: port@2 {
+ reg = <2>;
+ label = "lan1";
+ phy-handle = <&switch0phy2>;
+ };
+
+ switch0port3: port@3 {
+ reg = <3>;
+ label = "lan2";
+ phy-handle = <&switch0phy3>;
+ };
+
+ switch0port4: port@4 {
+ reg = <4>;
+ label = "lan3";
+ phy-handle = <&switch0phy4>;
+ };
+
+ switch0port5: port@5 {
+ reg = <5>;
+ label = "wan";
+ phy-handle = <&extphy>;
+ phy-mode = "sgmii";
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch0phy1: switch0phy1@11 {
+ reg = <0x11>;
+ };
+ switch0phy2: switch0phy2@12 {
+ reg = <0x12>;
+ };
+ switch0phy3: switch0phy3@13 {
+ reg = <0x13>;
+ };
+ switch0phy4: switch0phy4@14 {
+ reg = <0x14>;
+ };
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "armada-372x.dtsi"
+
+/ {
+ model = "GL.iNet GL-MV1000";
+ compatible = "glinet,gl-mv1000", "marvell,armada3720";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+ };
+
+ vcc_sd_reg1: regulator {
+ compatible = "regulator-gpio";
+ regulator-name = "vcc_sd1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+
+ gpios-states = <0>;
+ states = <1800000 0x1
+ 3300000 0x0>;
+ enable-active-high;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
+ };
+
+ switch {
+ label = "switch";
+ linux,code = <BTN_0>;
+ gpios = <&gpiosb 22 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ vpn {
+ label = "green:vpn";
+ gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power: power {
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ reg = <0>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <104000000>;
+ m25p,fast-read;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0 0xf0000>;
+ read-only;
+ };
+
+ partition@f0000 {
+ label = "u-boot-env";
+ reg = <0xf0000 0x8000>;
+ read-only;
+ };
+
+ factory: partition@f8000 {
+ label = "factory";
+ reg = <0xf8000 0x8000>;
+ read-only;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_factory_0: macaddr@0 {
+ reg = <0x0 0x6>;
+ };
+
+ macaddr_factory_6: macaddr@6 {
+ reg = <0x6 0x6>;
+ };
+ };
+ };
+
+ partition@100000 {
+ label = "gl-firmware-dtb";
+ reg = <0x100000 0x10000>;
+ read-only;
+ };
+
+ partition@110000 {
+ label = "gl-firmware";
+ reg = <0x110000 0xef0000>;
+ read-only;
+ };
+
+ partition@ef0000 {
+ label = "gl-firmware-jffs2";
+ reg = <0xef0000 0x110000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&sdhci1 {
+ wp-inverted;
+ bus-width = <4>;
+ cd-gpios = <&gpionb 17 GPIO_ACTIVE_LOW>;
+ marvell,pad-type = "sd";
+ no-1-8-v;
+ vqmmc-supply = <&vcc_sd_reg1>;
+ status = "okay";
+};
+
+&sdhci0 {
+ bus-width = <8>;
+ mmc-ddr-1_8v;
+ mmc-hs400-1_8v;
+ non-removable;
+ no-sd;
+ no-sdio;
+ marvell,pad-type = "fixed-1-8v";
+ status = "okay";
+};
+
+&usb3 {
+ status = "okay";
+};
+
+&usb2 {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&mdio {
+ switch0: switch0@1 {
+ compatible = "marvell,mv88e6085";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ dsa,member = <0 0>;
+
+ ports: ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ ethernet = <ð0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "wan";
+ phy-handle = <&switch0phy0>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan0";
+ phy-handle = <&switch0phy1>;
+
+ nvmem-cells = <&macaddr_factory_6>;
+ nvmem-cell-names = "mac-address";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan1";
+ phy-handle = <&switch0phy2>;
+
+ nvmem-cells = <&macaddr_factory_6>;
+ nvmem-cell-names = "mac-address";
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch0phy0: switch0phy0@11 {
+ reg = <0x11>;
+ };
+ switch0phy1: switch0phy1@12 {
+ reg = <0x12>;
+ };
+ switch0phy2: switch0phy2@13 {
+ reg = <0x13>;
+ };
+ };
+ };
+};
+
+ð0 {
+ nvmem-cells = <&macaddr_factory_0>;
+ nvmem-cell-names = "mac-address";
+ phy-mode = "rgmii-id";
+ status = "okay";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "armada-3720-uDPU.dtsi"
+
+/ {
+ model = "Methode uDPU Board";
+ compatible = "methode,udpu", "marvell,armada3720", "marvell,armada3710";
+
+ sfp_eth0: sfp-eth0 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c0>;
+ los-gpio = <&gpiosb 2 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&gpiosb 3 GPIO_ACTIVE_LOW>;
+ tx-disable-gpio = <&gpiosb 4 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpio = <&gpiosb 5 GPIO_ACTIVE_HIGH>;
+ maximum-power-milliwatt = <3000>;
+ };
+};
+
+&pinctrl_nb {
+ i2c1_recovery_pins: i2c1-recovery-pins {
+ groups = "i2c1";
+ function = "gpio";
+ };
+};
+
+&i2c0 {
+ status = "okay";
+ pinctrl-names = "default", "recovery";
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-1 = <&i2c1_recovery_pins>;
+ /delete-property/mrvl,i2c-fast-mode;
+ scl-gpios = <&gpionb 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpionb 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+ð0 {
+ phy-mode = "2500base-x";
+ sfp = <&sfp_eth0>;
+};
+
+ð1 {
+ phy-mode = "2500base-x";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device tree for the uDPU board.
+ * Based on Marvell Armada 3720 development board (DB-88F3720-DDR3)
+ * Copyright (C) 2016 Marvell
+ * Copyright (C) 2019 Methode Electronics
+ * Copyright (C) 2019 Telus
+ *
+ * Vladimir Vid <vladimir.vid@sartura.hr>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-372x.dtsi"
+
+/ {
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+ };
+
+ aliases {
+ ethernet0 = ð0;
+ ethernet1 = ð1;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-power1 {
+ label = "udpu:green:power";
+ gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
+ };
+
+ led-power2 {
+ label = "udpu:red:power";
+ gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
+ };
+
+ led-network1 {
+ label = "udpu:green:network";
+ gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
+ };
+
+ led-network2 {
+ label = "udpu:red:network";
+ gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
+ };
+
+ led-alarm1 {
+ label = "udpu:green:alarm";
+ gpios = <&gpionb 15 GPIO_ACTIVE_LOW>;
+ };
+
+ led-alarm2 {
+ label = "udpu:red:alarm";
+ gpios = <&gpionb 16 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ sfp_eth1: sfp-eth1 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c1>;
+ los-gpio = <&gpiosb 7 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>;
+ tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>;
+ maximum-power-milliwatt = <3000>;
+ };
+};
+
+&sdhci0 {
+ status = "okay";
+ bus-width = <8>;
+ mmc-ddr-1_8v;
+ mmc-hs400-1_8v;
+ marvell,pad-type = "fixed-1-8v";
+ non-removable;
+ no-sd;
+ no-sdio;
+};
+
+&spi0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_quad_pins>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <54000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "firmware";
+ reg = <0x0 0x180000>;
+ };
+
+ partition@180000 {
+ label = "u-boot-env";
+ reg = <0x180000 0x10000>;
+ };
+ };
+ };
+};
+
+&pinctrl_nb {
+ i2c2_recovery_pins: i2c2-recovery-pins {
+ groups = "i2c2";
+ function = "gpio";
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ pinctrl-names = "default", "recovery";
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-1 = <&i2c2_recovery_pins>;
+ /delete-property/mrvl,i2c-fast-mode;
+ scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+ temp-sensor@48 {
+ compatible = "ti,tmp75c";
+ reg = <0x48>;
+ };
+
+ temp-sensor@49 {
+ compatible = "ti,tmp75c";
+ reg = <0x49>;
+ };
+};
+
+ð0 {
+ status = "okay";
+ managed = "in-band-status";
+ phys = <&comphy1 0>;
+};
+
+ð1 {
+ phy-mode = "sgmii";
+ status = "okay";
+ managed = "in-band-status";
+ phys = <&comphy0 1>;
+ sfp = <&sfp_eth1>;
+};
+
+&usb3 {
+ status = "okay";
+ phys = <&usb2_utmi_otg_phy>;
+ phy-names = "usb2-utmi-otg-phy";
+};
+
+&uart0 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree file for Globalscale MOCHAbin
+ * Copyright (C) 2019 Globalscale technologies, Inc.
+ * Copyright (C) 2021 Sartura Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-7040.dtsi"
+
+/ {
+ model = "Globalscale MOCHAbin";
+ compatible = "globalscale,mochabin", "marvell,armada7040",
+ "marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ ethernet0 = &cp0_eth0;
+ ethernet1 = &cp0_eth1;
+ ethernet2 = &cp0_eth2;
+ ethernet3 = &swport1;
+ ethernet4 = &swport2;
+ ethernet5 = &swport3;
+ ethernet6 = &swport4;
+ };
+
+ /* SFP+ 10G */
+ sfp_eth0: sfp-eth0 {
+ compatible = "sff,sfp";
+ i2c-bus = <&cp0_i2c1>;
+ los-gpio = <&sfp_gpio 3 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&sfp_gpio 2 GPIO_ACTIVE_LOW>;
+ tx-disable-gpio = <&sfp_gpio 1 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpio = <&sfp_gpio 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* SFP 1G */
+ sfp_eth2: sfp-eth2 {
+ compatible = "sff,sfp";
+ i2c-bus = <&cp0_i2c0>;
+ los-gpio = <&sfp_gpio 7 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&sfp_gpio 6 GPIO_ACTIVE_LOW>;
+ tx-disable-gpio = <&sfp_gpio 5 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpio = <&sfp_gpio 4 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+/* microUSB UART console */
+&uart0 {
+ status = "okay";
+
+ pinctrl-0 = <&uart0_pins>;
+ pinctrl-names = "default";
+};
+
+/* eMMC */
+&ap_sdhci0 {
+ status = "okay";
+
+ bus-width = <4>;
+ non-removable;
+ /delete-property/ marvell,xenon-phy-slow-mode;
+ no-1-8-v;
+};
+
+&cp0_pinctrl {
+ cp0_uart0_pins: cp0-uart0-pins {
+ marvell,pins = "mpp6", "mpp7";
+ marvell,function = "uart0";
+ };
+
+ cp0_spi0_pins: cp0-spi0-pins {
+ marvell,pins = "mpp56", "mpp57", "mpp58", "mpp59";
+ marvell,function = "spi0";
+ };
+
+ cp0_spi1_pins: cp0-spi1-pins {
+ marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+ marvell,function = "spi1";
+ };
+
+ cp0_i2c0_pins: cp0-i2c0-pins {
+ marvell,pins = "mpp37", "mpp38";
+ marvell,function = "i2c0";
+ };
+
+ cp0_i2c1_pins: cp0-i2c1-pins {
+ marvell,pins = "mpp2", "mpp3";
+ marvell,function = "i2c1";
+ };
+
+ pca9554_int_pins: pca9554-int-pins {
+ marvell,pins = "mpp27";
+ marvell,function = "gpio";
+ };
+
+ cp0_rgmii1_pins: cp0-rgmii1-pins {
+ marvell,pins = "mpp44", "mpp45", "mpp46", "mpp47", "mpp48", "mpp49",
+ "mpp50", "mpp51", "mpp52", "mpp53", "mpp54", "mpp55";
+ marvell,function = "ge1";
+ };
+
+ is31_sdb_pins: is31-sdb-pins {
+ marvell,pins = "mpp30";
+ marvell,function = "gpio";
+ };
+
+ cp0_pcie_reset_pins: cp0-pcie-reset-pins {
+ marvell,pins = "mpp9";
+ marvell,function = "gpio";
+ };
+
+ cp0_switch_pins: cp0-switch-pins {
+ marvell,pins = "mpp0", "mpp1";
+ marvell,function = "gpio";
+ };
+
+ cp0_phy_pins: cp0-phy-pins {
+ marvell,pins = "mpp12";
+ marvell,function = "gpio";
+ };
+};
+
+/* mikroBUS UART */
+&cp0_uart0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_uart0_pins>;
+};
+
+/* mikroBUS SPI */
+&cp0_spi0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_spi0_pins>;
+};
+
+/* SPI-NOR */
+&cp0_spi1{
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_spi1_pins>;
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x3e0000>;
+ read-only;
+ };
+
+ partition@3e0000 {
+ label = "hw-info";
+ reg = <0x3e0000 0x10000>;
+ read-only;
+ };
+
+ partition@3f0000 {
+ label = "u-boot-env";
+ reg = <0x3f0000 0x10000>;
+ };
+ };
+ };
+};
+
+/* mikroBUS, 1G SFP and GPIO expander */
+&cp0_i2c0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_i2c0_pins>;
+ clock-frequency = <100000>;
+
+ sfp_gpio: pca9554@39 {
+ compatible = "nxp,pca9554";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pca9554_int_pins>;
+ reg = <0x39>;
+
+ interrupt-parent = <&cp0_gpio1>;
+ interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ /*
+ * IO0_0: SFP+_TX_FAULT
+ * IO0_1: SFP+_TX_DISABLE
+ * IO0_2: SFP+_PRSNT
+ * IO0_3: SFP+_LOSS
+ * IO0_4: SFP_TX_FAULT
+ * IO0_5: SFP_TX_DISABLE
+ * IO0_6: SFP_PRSNT
+ * IO0_7: SFP_LOSS
+ */
+ };
+};
+
+/* IS31FL3199, mini-PCIe and 10G SFP+ */
+&cp0_i2c1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_i2c1_pins>;
+ clock-frequency = <100000>;
+
+ leds@64 {
+ compatible = "issi,is31fl3199";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&is31_sdb_pins>;
+ shutdown-gpios = <&cp0_gpio1 30 GPIO_ACTIVE_HIGH>;
+ reg = <0x64>;
+
+ led1_red: led@1 {
+ label = "red:led1";
+ reg = <1>;
+ led-max-microamp = <20000>;
+ };
+
+ led1_green: led@2 {
+ label = "green:led1";
+ reg = <2>;
+ };
+
+ led1_blue: led@3 {
+ label = "blue:led1";
+ reg = <3>;
+ };
+
+ led2_red: led@4 {
+ label = "red:led2";
+ reg = <4>;
+ };
+
+ led2_green: led@5 {
+ label = "green:led2";
+ reg = <5>;
+ };
+
+ led2_blue: led@6 {
+ label = "blue:led2";
+ reg = <6>;
+ };
+
+ led3_red: led@7 {
+ label = "red:led3";
+ reg = <7>;
+ };
+
+ led3_green: led@8 {
+ label = "green:led3";
+ reg = <8>;
+ };
+
+ led3_blue: led@9 {
+ label = "blue:led3";
+ reg = <9>;
+ };
+ };
+};
+
+&cp0_mdio {
+ status = "okay";
+
+ /* 88E1512 PHY */
+ eth2phy: ethernet-phy@1 {
+ reg = <1>;
+ sfp = <&sfp_eth2>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_phy_pins>;
+ reset-gpios = <&cp0_gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+
+ /* 88E6141 Topaz switch */
+ switch: switch@3 {
+ compatible = "marvell,mv88e6085";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_switch_pins>;
+ reset-gpios = <&cp0_gpio1 0 GPIO_ACTIVE_LOW>;
+
+ interrupt-parent = <&cp0_gpio1>;
+ interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ swport1: port@1 {
+ reg = <1>;
+ label = "lan0";
+ phy-handle = <&swphy1>;
+ };
+
+ swport2: port@2 {
+ reg = <2>;
+ label = "lan1";
+ phy-handle = <&swphy2>;
+ };
+
+ swport3: port@3 {
+ reg = <3>;
+ label = "lan2";
+ phy-handle = <&swphy3>;
+ };
+
+ swport4: port@4 {
+ reg = <4>;
+ label = "lan3";
+ phy-handle = <&swphy4>;
+ };
+
+ port@5 {
+ reg = <5>;
+ ethernet = <&cp0_eth1>;
+ phy-mode = "2500base-x";
+ managed = "in-band-status";
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ swphy1: swphy1@17 {
+ reg = <17>;
+ };
+
+ swphy2: swphy2@18 {
+ reg = <18>;
+ };
+
+ swphy3: swphy3@19 {
+ reg = <19>;
+ };
+
+ swphy4: swphy4@20 {
+ reg = <20>;
+ };
+ };
+ };
+};
+
+&cp0_ethernet {
+ status = "okay";
+};
+
+/* 10G SFP+ */
+&cp0_eth0 {
+ status = "okay";
+
+ phy-mode = "10gbase-r";
+ phys = <&cp0_comphy4 0>;
+ managed = "in-band-status";
+ sfp = <&sfp_eth0>;
+};
+
+/* Topaz switch uplink */
+&cp0_eth1 {
+ status = "okay";
+
+ phy-mode = "2500base-x";
+ phys = <&cp0_comphy0 1>;
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ };
+};
+
+/* 1G SFP or 1G RJ45 */
+&cp0_eth2 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_rgmii1_pins>;
+
+ phy = <ð2phy>;
+ phy-mode = "rgmii-id";
+};
+
+/* SMSC USB5434B hub */
+&cp0_usb3_0 {
+ status = "okay";
+
+ phys = <&cp0_comphy1 0>;
+ phy-names = "cp0-usb3h0-comphy";
+};
+
+/* miniPCI-E USB */
+&cp0_usb3_1 {
+ status = "okay";
+};
+
+&cp0_sata0 {
+ status = "okay";
+
+ /* 7 + 12 SATA connector (J24) */
+ sata-port@0 {
+ phys = <&cp0_comphy2 0>;
+ phy-names = "cp0-sata0-0-phy";
+ };
+
+ /* M.2-2250 B-key (J39) */
+ sata-port@1 {
+ phys = <&cp0_comphy3 1>;
+ phy-names = "cp0-sata0-1-phy";
+ };
+};
+
+/* miniPCI-E (J5) */
+&cp0_pcie2 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_pcie_reset_pins>;
+ phys = <&cp0_comphy5 2>;
+ phy-names = "cp0-pcie2-x1-phy";
+ reset-gpio = <&cp0_gpio1 9 GPIO_ACTIVE_LOW>;
+ ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x8000000>;
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright SolidRun Ltd.
+ * Copyright (C) 2024 Tobias Schramm <tobias@t-sys.eu>
+ *
+ * Device tree for the CN9130-based ClearFog Pro
+ */
+
+#include "cn9130.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "SolidRun ClearFog Pro";
+ compatible = "solidrun,clearfog-pro", "marvell,armada-ap807-quad",
+ "marvell,armada-ap807";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ gpio1 = &cp0_gpio1;
+ gpio2 = &cp0_gpio2;
+ i2c0 = &cp0_i2c0;
+ ethernet0 = &cp0_eth0;
+ ethernet1 = &cp0_eth1;
+ ethernet2 = &cp0_eth2;
+ spi1 = &cp0_spi1;
+ };
+
+ memory@00000000 {
+ reg = <0x0 0x0 0x1 0x0>;
+ device_type = "memory";
+ };
+
+ /* Virtual regulator, root of power tree */
+ vin: regulator-vin {
+ compatible = "regulator-fixed";
+ regulator-name = "vin";
+ regulator-always-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ /* Regulators supplied by vin */
+ v_5v0: regulator-v_5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "v_5v0";
+ regulator-always-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vin>;
+ };
+
+ v_3v3: regulator-v_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "v_3v3";
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vin>;
+ };
+
+ /* Regulators supplied by v_5v0 */
+ v_1v8: regulator-v_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "v_1v8";
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&v_5v0>;
+ };
+
+ v_5v0_usb3_hst_vbus: regulator-v_5v0_usb3_hst_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "v_5v0_usb3_hst_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&expander0 6 GPIO_ACTIVE_LOW>;
+ vin-supply = <&v_5v0>;
+ };
+
+ /* Regulators internal to SOM */
+ vqmmc: regulator-vqmmc {
+ compatible = "regulator-fixed";
+ regulator-name = "vqmmc";
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&v_5v0>;
+ };
+
+ cp0_usb3_0_phy1: cp0_usb3_phy@1 {
+ compatible = "usb-nop-xceiv";
+ vbus-supply = <&v_5v0_usb3_hst_vbus>;
+ };
+
+ cp0_sfp_eth0: sfp-eth@0 {
+ compatible = "sff,sfp";
+ i2c-bus = <&cp0_i2c1>;
+ los-gpio = <&expander0 12 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&expander0 15 GPIO_ACTIVE_LOW>;
+ tx-disable-gpio = <&expander0 14 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpio = <&expander0 13 GPIO_ACTIVE_HIGH>;
+ maximum-power-milliwatt = <2000>;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_button_pin>;
+
+ reset {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&cp0_gpio2 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+/* on-board eMMC */
+&ap_sdhci0 {
+ bus-width = <8>;
+ pinctrl-names = "default";
+ vqmmc-supply = <&vqmmc>;
+ status = "okay";
+};
+
+&cp0_crypto {
+ status = "okay";
+};
+
+&cp0_ethernet {
+ status = "okay";
+};
+
+&cp0_gpio1 {
+ status = "okay";
+};
+
+&cp0_gpio2 {
+ status = "okay";
+};
+
+&cp0_i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_i2c0_pins>;
+ clock-frequency = <100000>;
+
+ /*
+ * PCA9655 GPIO expander, up to 1MHz clock.
+ * 0-CON3 CLKREQ#
+ * 1-CON3 PERST#
+ * 2-CON2 PERST#
+ * 3-CON3 W_DISABLE
+ * 4-CON2 CLKREQ#
+ * 5-USB3 overcurrent
+ * 6-USB3 power
+ * 7-CON2 W_DISABLE
+ * 8-JP4 P1
+ * 9-JP4 P4
+ * 10-JP4 P5
+ * 11-m.2 DEVSLP
+ * 12-SFP_LOS
+ * 13-SFP_TX_FAULT
+ * 14-SFP_TX_DISABLE
+ * 15-SFP_MOD_DEF0
+ */
+ expander0: gpio-expander@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&cp0_gpio1>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_expander0_pins>;
+ vcc-supply = <&v_3v3>;
+
+ pcie1_0_clkreq {
+ gpio-hog;
+ gpios = <0 GPIO_ACTIVE_LOW>;
+ input;
+ line-name = "pcie1.0-clkreq";
+ };
+
+ pcie1_0_w_disable {
+ gpio-hog;
+ gpios = <3 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "pcie1.0-w-disable";
+ };
+
+ pcie2_0_clkreq {
+ gpio-hog;
+ gpios = <4 GPIO_ACTIVE_LOW>;
+ input;
+ line-name = "pcie2.0-clkreq";
+ };
+
+ pcie2_0_w_disable {
+ gpio-hog;
+ gpios = <7 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "pcie2.0-w-disable";
+ };
+
+ usb3_ilimit {
+ gpio-hog;
+ gpios = <5 GPIO_ACTIVE_LOW>;
+ input;
+ line-name = "usb3-current-limit";
+ };
+
+ m2_devslp {
+ gpio-hog;
+ gpios = <11 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "m.2 devslp";
+ };
+ };
+
+ /* ADC only for mikroBUS connector */
+ mcp3021@4c {
+ compatible = "microchip,mcp3021";
+ reg = <0x4c>;
+ };
+
+ /* EEPROM on the SOM */
+ eeprom@53 {
+ compatible = "atmel,24c02";
+ reg = <0x53>;
+ pagesize = <16>;
+ read-only;
+
+ nvmem-layout {
+ compatible = "onie,tlv-layout";
+
+ onie_tlv_macaddr: mac-address {
+ #nvmem-cell-cells = <1>;
+ };
+ };
+ };
+};
+
+/* SMBUS on mini PCIe sockets */
+&cp0_i2c1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_i2c1_pins>;
+ clock-frequency = <100000>;
+};
+
+&cp0_mdio {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ /* Green led blinks on activity, orange LED on link */
+ marvell,reg-init = <3 16 0 0x0064>;
+ };
+
+ switch@4 {
+ compatible = "marvell,mv88e6085";
+ reg = <4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&cp0_gpio1>;
+ interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_dsa0_pins>;
+ reset-gpios = <&cp0_gpio1 27 GPIO_ACTIVE_LOW>;
+
+ mdio-external {
+ compatible = "marvell,mv88e6xxx-mdio-external";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 88E1512 PHY */
+ port6_phy: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan5";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan4";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan2";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan1";
+ };
+
+ port@5 {
+ reg = <5>;
+ ethernet = <&cp0_eth1>;
+ label = "cpu";
+ phy-mode = "rgmii-id";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ port@6 {
+ /* 88E1512 external phy */
+ reg = <6>;
+ label = "lan6";
+ phy-handle = <&port6_phy>;
+ phy-mode = "rgmii-id";
+ };
+ };
+ };
+};
+
+/* SRDS #0 - SATA on bottom M.2 B-Key connector */
+&cp0_sata0 {
+ status = "okay";
+
+ sata-port@0 {
+ status = "disabled";
+ };
+
+ sata-port@1 {
+ phys = <&cp0_comphy0 1>;
+ target-supply = <&v_3v3>;
+ };
+};
+
+&cp0_utmi {
+ status = "okay";
+};
+
+/* mini PCIe slot far from SOM, USB 2.0 only, SS lanes unused */
+&cp0_usb3_0 {
+ status = "okay";
+ phys = <&cp0_utmi0>;
+ phy-names = "utmi";
+ dr_mode = "host";
+};
+
+/* SRDS #1 - USB-A 3.0 host port */
+&cp0_usb3_1 {
+ status = "okay";
+ phys = <&cp0_utmi1>, <&cp0_comphy1 0>;
+ phy-names = "utmi", "usb";
+ usb-phy = <&cp0_usb3_0_phy1>;
+ dr_mode = "host";
+};
+
+/* SRDS #2 - SFP+ 10GE */
+&cp0_eth0 {
+ status = "okay";
+ phy-mode = "10gbase-r";
+ phys = <&cp0_comphy2 0>;
+ managed = "in-band-status";
+ nvmem-cells = <&onie_tlv_macaddr 0>;
+ nvmem-cell-names = "mac-address";
+ sfp = <&cp0_sfp_eth0>;
+};
+
+/* SRDS #3 - SGMII 1GE to L2 switch */
+&cp0_eth1 {
+ status = "okay";
+ phys = <&cp0_comphy3 1>;
+ phy-mode = "sgmii";
+ nvmem-cells = <&onie_tlv_macaddr 1>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+/* SRDS #4 - mini PCIe slot near SOM */
+&cp0_pcie1 {
+ status = "okay";
+ phys = <&cp0_comphy4 1>;
+ num-lanes = <1>;
+ reset-gpios = <&expander0 2 GPIO_ACTIVE_LOW>;
+};
+
+/* SRDS #5 - mini PCIe slot far from SOM */
+&cp0_pcie2 {
+ status = "okay";
+ phys = <&cp0_comphy5 2>;
+ num-lanes = <1>;
+ reset-gpios = <&expander0 1 GPIO_ACTIVE_LOW>;
+};
+
+/* GE PHY RGMII */
+&cp0_eth2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_ge2_rgmii_pins>;
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+ nvmem-cells = <&onie_tlv_macaddr 2>;
+ nvmem-cell-names = "mac-address";
+};
+
+/* micro SD card slot */
+&cp0_sdhci0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_sdhci_pins &cp0_sdhci_cd_pins>;
+ bus-width = <4>;
+ cd-gpios = <&cp0_gpio2 11 GPIO_ACTIVE_LOW>;
+ no-1-8-v;
+ vqmmc-supply = <&v_3v3>;
+ vmmc-supply = <&v_3v3>;
+};
+
+&cp0_spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_spi1_pins>;
+
+ spi-flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ spi-max-frequency = <10000000>;
+ };
+};
+
+&cp0_syscon0 {
+ cp0_pinctrl: pinctrl {
+ compatible = "marvell,cp115-standalone-pinctrl";
+
+ cp0_i2c0_pins: cp0-i2c0-pins {
+ marvell,pins = "mpp37", "mpp38";
+ marvell,function = "i2c0";
+ };
+
+ cp0_i2c1_pins: cp0-i2c1-pins {
+ marvell,pins = "mpp35", "mpp36";
+ marvell,function = "i2c1";
+ };
+
+ cp0_ge2_rgmii_pins: cp0-ge2-rgmii-pins {
+ marvell,pins = "mpp44", "mpp45", "mpp46",
+ "mpp47", "mpp48", "mpp49",
+ "mpp50", "mpp51", "mpp52",
+ "mpp53", "mpp54", "mpp55";
+ marvell,function = "ge1";
+ };
+
+ cp0_sdhci_cd_pins: cp0-sdhci-cd-pins {
+ marvell,pins = "mpp43";
+ marvell,function = "sdio";
+ };
+
+ cp0_sdhci_pins: cp0-sdhci-pins {
+ marvell,pins = "mpp56", "mpp57", "mpp58",
+ "mpp59", "mpp60", "mpp61";
+ marvell,function = "sdio";
+ };
+
+ cp0_spi1_pins: cp0-spi1-pins {
+ marvell,pins = "mpp12", "mpp13", "mpp14",
+ "mpp15", "mpp16";
+ marvell,function = "spi1";
+ };
+
+ cp0_dsa0_pins: cp0-dsa0-pins {
+ marvell,pins = "mpp27", "mpp29";
+ marvell,function = "gpio";
+ };
+
+ cp0_button_pin: cp0-button-pin {
+ marvell,pins = "mpp32";
+ marvell,function = "gpio";
+ };
+
+ cp0_expander0_pins: cp0-expander0-pins {
+ marvell,pins = "mpp4";
+ marvell,function = "gpio";
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * Device tree for the CN9131-DB board.
+ */
+
+#include "cn9130.dtsi"
+#include "puzzle-thermal.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "iEi Puzzle-M901";
+ compatible = "iei,puzzle-m901",
+ "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ i2c0 = &cp1_i2c0;
+ i2c1 = &cp0_i2c0;
+ ethernet0 = &cp0_eth0;
+ ethernet1 = &cp0_eth1;
+ ethernet2 = &cp0_eth2;
+ ethernet3 = &cp1_eth0;
+ ethernet4 = &cp1_eth1;
+ ethernet5 = &cp1_eth2;
+ gpio1 = &cp0_gpio1;
+ gpio2 = &cp0_gpio2;
+ gpio3 = &cp1_gpio1;
+ gpio4 = &cp1_gpio2;
+ led-boot = &led_power;
+ led-failsafe = &led_info;
+ led-running = &led_power;
+ led-upgrade = &led_info;
+ };
+
+ memory@00000000 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&cp0_gpio2 4 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&cp0_uart0 {
+ status = "okay";
+
+ puzzle-mcu {
+ compatible = "iei,wt61p803-puzzle";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ current-speed = <115200>;
+ enable-beep;
+ status = "okay";
+
+ leds {
+ compatible = "iei,wt61p803-puzzle-leds";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ led@0 {
+ reg = <0>;
+ label = "white:network";
+ active-low;
+ };
+
+ led@1 {
+ reg = <1>;
+ label = "green:cloud";
+ active-low;
+ };
+
+ led_info: led@2 {
+ reg = <2>;
+ label = "orange:info";
+ active-low;
+ };
+
+ led_power: led@3 {
+ reg = <3>;
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_YELLOW>;
+ active-low;
+ default-state = "on";
+ };
+ };
+
+ hwmon {
+ compatible = "iei,wt61p803-puzzle-hwmon";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ chassis_fan_group0: fan-group@0 {
+ #cooling-cells = <2>;
+ reg = <0x00>;
+ cooling-levels = <0 159 195 211 223 241 255>;
+ };
+ };
+ };
+};
+
+&ap_thermal_ic {
+ PUZZLE_FAN_THERMAL(ic, &chassis_fan_group0);
+};
+
+&cp0_thermal_ic {
+ PUZZLE_FAN_THERMAL(cp0, &chassis_fan_group0);
+};
+
+/* on-board eMMC - U9 */
+&ap_sdhci0 {
+ pinctrl-names = "default";
+ bus-width = <8>;
+ status = "okay";
+ mmc-ddr-1_8v;
+ mmc-hs400-1_8v;
+};
+
+&cp0_crypto {
+ status = "okay";
+};
+
+&cp0_xmdio {
+ status = "okay";
+ cp0_nbaset_phy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <2>;
+ };
+ cp0_nbaset_phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0>;
+ };
+ cp0_nbaset_phy2: ethernet-phy@2 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <8>;
+ };
+};
+
+&cp0_ethernet {
+ status = "okay";
+};
+
+/* SLM-1521-V2, CON9 */
+&cp0_eth0 {
+ status = "okay";
+ phy-mode = "2500base-x";
+ phys = <&cp0_comphy2 0>;
+ phy = <&cp0_nbaset_phy0>;
+};
+
+&cp0_eth1 {
+ status = "okay";
+ phy-mode = "2500base-x";
+ phys = <&cp0_comphy4 1>;
+ phy = <&cp0_nbaset_phy1>;
+};
+
+&cp0_eth2 {
+ status = "okay";
+ phy-mode = "2500base-x";
+ phys = <&cp0_comphy5 2>;
+ phy = <&cp0_nbaset_phy2>;
+};
+
+&cp0_gpio1 {
+ status = "okay";
+};
+
+&cp0_gpio2 {
+ status = "okay";
+};
+
+&cp0_i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_i2c0_pins>;
+ status = "okay";
+ clock-frequency = <100000>;
+ rtc@32 {
+ compatible = "epson,rx8130";
+ reg = <0x32>;
+ wakeup-source;
+ };
+};
+
+/* SLM-1521-V2, CON6 */
+&cp0_pcie0 {
+ status = "okay";
+ num-lanes = <2>;
+ num-viewport = <8>;
+ phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>;
+};
+
+/* U55 */
+&cp0_spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_spi0_pins>;
+ reg = <0x700680 0x50>, /* control */
+ <0x2000000 0x1000000>; /* CS0 */
+ status = "okay";
+ spi-flash@0 {
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+ spi-max-frequency = <40000000>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "U-Boot";
+ reg = <0x0 0x1f0000>;
+ };
+ partition@1f0000 {
+ label = "U-Boot ENV Factory";
+ reg = <0x1f0000 0x10000>;
+ };
+ partition@200000 {
+ label = "Reserved";
+ reg = <0x200000 0x1f0000>;
+ };
+ partition@3f0000 {
+ label = "U-Boot ENV";
+ reg = <0x3f0000 0x10000>;
+ };
+ };
+ };
+};
+
+&cp0_rtc {
+ status = "disabled";
+};
+
+&cp0_syscon0 {
+ cp0_pinctrl: pinctrl {
+ compatible = "marvell,cp115-standalone-pinctrl";
+ cp0_i2c0_pins: cp0-i2c-pins-0 {
+ marvell,pins = "mpp37", "mpp38";
+ marvell,function = "i2c0";
+ };
+ cp0_i2c1_pins: cp0-i2c-pins-1 {
+ marvell,pins = "mpp35", "mpp36";
+ marvell,function = "i2c1";
+ };
+ cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 {
+ marvell,pins = "mpp0", "mpp1", "mpp2",
+ "mpp3", "mpp4", "mpp5",
+ "mpp6", "mpp7", "mpp8",
+ "mpp9", "mpp10", "mpp11";
+ marvell,function = "ge0";
+ };
+ cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 {
+ marvell,pins = "mpp44", "mpp45", "mpp46",
+ "mpp47", "mpp48", "mpp49",
+ "mpp50", "mpp51", "mpp52",
+ "mpp53", "mpp54", "mpp55";
+ marvell,function = "ge1";
+ };
+ cp0_spi0_pins: cp0-spi-pins-0 {
+ marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+ marvell,function = "spi1";
+ };
+ };
+};
+
+/*
+ * Instantiate the first connected CP115
+ */
+
+#define CP11X_NAME cp1
+#define CP11X_BASE f6000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE f6600000
+#define CP11X_PCIE1_BASE f6620000
+#define CP11X_PCIE2_BASE f6640000
+
+#include "armada-cp115.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
+
+&cp1_crypto {
+ status = "okay";
+};
+
+&cp1_xmdio {
+ status = "okay";
+ cp1_nbaset_phy0: ethernet-phy@3 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <2>;
+ };
+ cp1_nbaset_phy1: ethernet-phy@4 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0>;
+ };
+ cp1_nbaset_phy2: ethernet-phy@5 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <8>;
+ };
+};
+
+&cp1_ethernet {
+ status = "okay";
+};
+
+/* CON50 */
+&cp1_eth0 {
+ status = "okay";
+ phy-mode = "2500base-x";
+ phys = <&cp1_comphy2 0>;
+ phy = <&cp1_nbaset_phy0>;
+};
+
+&cp1_eth1 {
+ status = "okay";
+ phy-mode = "2500base-x";
+ phys = <&cp1_comphy4 1>;
+ phy = <&cp1_nbaset_phy1>;
+};
+
+&cp1_eth2 {
+ status = "okay";
+ phy-mode = "2500base-x";
+ phys = <&cp1_comphy5 2>;
+ phy = <&cp1_nbaset_phy2>;
+};
+
+&cp1_sata0 {
+ status = "okay";
+ sata-port@1 {
+ status = "okay";
+ phys = <&cp1_comphy0 1>;
+ };
+};
+
+&cp1_gpio1 {
+ status = "okay";
+};
+
+&cp1_gpio2 {
+ status = "okay";
+};
+
+&cp1_i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_i2c0_pins>;
+ clock-frequency = <100000>;
+};
+
+&cp1_rtc {
+ status = "disabled";
+};
+
+&cp1_syscon0 {
+ cp1_pinctrl: pinctrl {
+ compatible = "marvell,cp115-standalone-pinctrl";
+ cp1_i2c0_pins: cp1-i2c-pins-0 {
+ marvell,pins = "mpp37", "mpp38";
+ marvell,function = "i2c0";
+ };
+ cp1_spi0_pins: cp1-spi-pins-0 {
+ marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+ marvell,function = "spi1";
+ };
+ cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins {
+ marvell,pins = "mpp3";
+ marvell,function = "gpio";
+ };
+ cp1_sfp_pins: sfp-pins {
+ marvell,pins = "mpp8", "mpp9", "mpp10", "mpp11";
+ marvell,function = "gpio";
+ };
+ };
+};
+
+&cp1_thermal_ic {
+ PUZZLE_FAN_THERMAL(cp1, &chassis_fan_group0);
+};
+
+&cp1_usb3_1 {
+ status = "okay";
+ phys = <&cp1_comphy3 1>;
+ phy-names = "usb";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * Device tree for the CN9132-DB board.
+ */
+
+#include "cn9130.dtsi"
+#include "puzzle-thermal.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "iEi Puzzle-M902";
+ compatible = "iei,puzzle-m902",
+ "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ i2c0 = &cp1_i2c0;
+ i2c1 = &cp0_i2c0;
+ gpio1 = &cp0_gpio1;
+ gpio2 = &cp0_gpio2;
+ gpio3 = &cp1_gpio1;
+ gpio4 = &cp1_gpio2;
+ gpio5 = &cp2_gpio1;
+ gpio6 = &cp2_gpio2;
+ ethernet0 = &cp0_eth0;
+ ethernet1 = &cp0_eth1;
+ ethernet2 = &cp0_eth2;
+ ethernet3 = &cp1_eth0;
+ ethernet4 = &cp1_eth1;
+ ethernet5 = &cp1_eth2;
+ ethernet6 = &cp2_eth0;
+ ethernet7 = &cp2_eth1;
+ ethernet8 = &cp2_eth2;
+ spi1 = &cp0_spi0;
+ spi2 = &cp0_spi1;
+ led-boot = &led_power;
+ led-failsafe = &led_info;
+ led-running = &led_power;
+ led-upgrade = &led_info;
+ };
+
+ memory@00000000 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&cp0_gpio2 4 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ cp2_reg_usb3_vbus0: cp2_usb3_vbus@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "cp2-xhci0-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&cp2_gpio1 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ cp2_usb3_0_phy0: cp2_usb3_phy0 {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <&cp2_reg_usb3_vbus0>;
+ };
+
+ cp2_reg_usb3_vbus1: cp2_usb3_vbus@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "cp2-xhci1-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&cp2_gpio1 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ cp2_usb3_0_phy1: cp2_usb3_phy1 {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <&cp2_reg_usb3_vbus1>;
+ };
+
+ cp2_sfp_eth0: sfp-eth0 {
+ compatible = "sff,sfp";
+ i2c-bus = <&cp2_sfpp0_i2c>;
+ los-gpio = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&cp2_module_expander1 10 GPIO_ACTIVE_LOW>;
+ tx-disable-gpio = <&cp2_module_expander1 9 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpio = <&cp2_module_expander1 8 GPIO_ACTIVE_HIGH>;
+ status = "disabled";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&cp0_uart0 {
+ status = "okay";
+
+ puzzle-mcu {
+ compatible = "iei,wt61p803-puzzle";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ current-speed = <115200>;
+ enable-beep;
+ status = "okay";
+
+ leds {
+ compatible = "iei,wt61p803-puzzle-leds";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ led@0 {
+ reg = <0>;
+ label = "white:network";
+ active-low;
+ };
+
+ led@1 {
+ reg = <1>;
+ label = "green:cloud";
+ active-low;
+ };
+
+ led_info: led@2 {
+ reg = <2>;
+ label = "orange:info";
+ active-low;
+ };
+
+ led_power: led@3 {
+ reg = <3>;
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_YELLOW>;
+ active-low;
+ default-state = "on";
+ };
+ };
+
+ hwmon {
+ compatible = "iei,wt61p803-puzzle-hwmon";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ chassis_fan_group0: fan-group@0 {
+ #cooling-cells = <2>;
+ reg = <0x00>;
+ cooling-levels = <0 159 195 211 223 241 255>;
+ };
+ };
+ };
+};
+
+&ap_thermal_ic {
+ PUZZLE_FAN_THERMAL(ic, &chassis_fan_group0);
+};
+
+&cp0_thermal_ic {
+ PUZZLE_FAN_THERMAL(cp0, &chassis_fan_group0);
+};
+
+
+/* on-board eMMC - U9 */
+&ap_sdhci0 {
+ pinctrl-names = "default";
+ bus-width = <8>;
+ status = "okay";
+ mmc-ddr-1_8v;
+ mmc-hs400-1_8v;
+};
+
+&cp0_crypto {
+ status = "okay";
+};
+
+&cp0_xmdio {
+ status = "okay";
+ cp0_nbaset_phy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <2>;
+ };
+ cp0_nbaset_phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0>;
+ };
+ cp0_nbaset_phy2: ethernet-phy@2 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <8>;
+ };
+};
+
+&cp0_ethernet {
+ status = "okay";
+};
+
+/* SLM-1521-V2, CON9 */
+&cp0_eth0 {
+ status = "okay";
+ phy-mode = "10gbase-kr";
+ phys = <&cp0_comphy2 0>;
+ phy = <&cp0_nbaset_phy0>;
+};
+
+&cp0_eth1 {
+ status = "okay";
+ phy-mode = "2500base-x";
+ phys = <&cp0_comphy4 1>;
+ phy = <&cp0_nbaset_phy1>;
+};
+
+&cp0_eth2 {
+ status = "okay";
+ phy-mode = "2500base-x";
+ phys = <&cp0_comphy1 2>;
+ phy = <&cp0_nbaset_phy2>;
+};
+
+&cp0_gpio1 {
+ status = "okay";
+};
+
+&cp0_gpio2 {
+ status = "okay";
+};
+
+&cp0_i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_i2c0_pins>;
+ status = "okay";
+ clock-frequency = <100000>;
+ rtc@32 {
+ compatible = "epson,rx8130";
+ reg = <0x32>;
+ wakeup-source;
+ };
+};
+
+&cp0_i2c1 {
+ clock-frequency = <100000>;
+};
+
+/* SLM-1521-V2, CON6 */
+&cp0_sata0 {
+ status = "okay";
+ sata-port@1 {
+ status = "okay";
+ phys = <&cp0_comphy0 1>;
+ };
+};
+
+&cp0_pcie2 {
+ status = "okay";
+ num-lanes = <1>;
+ num-viewport = <8>;
+ phys = <&cp0_comphy5 2>;
+};
+
+/* U55 */
+&cp0_spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_spi0_pins>;
+ reg = <0x700680 0x50>, /* control */
+ <0x2000000 0x1000000>; /* CS0 */
+ status = "okay";
+ spi-flash@0 {
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+ spi-max-frequency = <40000000>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "U-Boot";
+ reg = <0x0 0x1f0000>;
+ };
+ partition@1f0000 {
+ label = "U-Boot ENV Factory";
+ reg = <0x1f0000 0x10000>;
+ };
+ partition@200000 {
+ label = "Reserved";
+ reg = <0x200000 0x1f0000>;
+ };
+ partition@3f0000 {
+ label = "U-Boot ENV";
+ reg = <0x3f0000 0x10000>;
+ };
+ };
+ };
+};
+
+&cp0_rtc {
+ status = "disabled";
+};
+
+&cp0_syscon0 {
+ cp0_pinctrl: pinctrl {
+ compatible = "marvell,cp115-standalone-pinctrl";
+ cp0_i2c0_pins: cp0-i2c-pins-0 {
+ marvell,pins = "mpp37", "mpp38";
+ marvell,function = "i2c0";
+ };
+ cp0_i2c1_pins: cp0-i2c-pins-1 {
+ marvell,pins = "mpp35", "mpp36";
+ marvell,function = "i2c1";
+ };
+ cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 {
+ marvell,pins = "mpp0", "mpp1", "mpp2",
+ "mpp3", "mpp4", "mpp5",
+ "mpp6", "mpp7", "mpp8",
+ "mpp9", "mpp10", "mpp11";
+ marvell,function = "ge0";
+ };
+ cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 {
+ marvell,pins = "mpp44", "mpp45", "mpp46",
+ "mpp47", "mpp48", "mpp49",
+ "mpp50", "mpp51", "mpp52",
+ "mpp53", "mpp54", "mpp55";
+ marvell,function = "ge1";
+ };
+ cp0_spi0_pins: cp0-spi-pins-0 {
+ marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+ marvell,function = "spi1";
+ };
+ };
+};
+
+&cp0_usb3_1 {
+ status = "okay";
+ phys = <&cp0_comphy3 1>;
+ phy-names = "usb";
+};
+
+/*
+ * Instantiate the first connected CP115
+ */
+
+#define CP11X_NAME cp1
+#define CP11X_BASE f4000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE f4600000
+#define CP11X_PCIE1_BASE f4620000
+#define CP11X_PCIE2_BASE f4640000
+
+#include "armada-cp115.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
+
+&cp1_crypto {
+ status = "okay";
+};
+
+&cp1_xmdio {
+ status = "okay";
+ cp1_nbaset_phy0: ethernet-phy@3 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <2>;
+ };
+ cp1_nbaset_phy1: ethernet-phy@4 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0>;
+ };
+ cp1_nbaset_phy2: ethernet-phy@5 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <8>;
+ };
+};
+
+&cp1_ethernet {
+ status = "okay";
+};
+
+/* CON50 */
+&cp1_eth0 {
+ status = "okay";
+ phy-mode = "10gbase-kr";
+ phys = <&cp1_comphy2 0>;
+ phy = <&cp1_nbaset_phy0>;
+};
+
+&cp1_eth1 {
+ status = "okay";
+ phy-mode = "2500base-x";
+ phys = <&cp1_comphy4 1>;
+ phy = <&cp1_nbaset_phy1>;
+};
+
+&cp1_eth2 {
+ status = "okay";
+ phy-mode = "2500base-x";
+ phys = <&cp1_comphy1 2>;
+ phy = <&cp1_nbaset_phy2>;
+};
+
+&cp1_gpio1 {
+ status = "okay";
+};
+
+&cp1_gpio2 {
+ status = "okay";
+};
+
+&cp1_i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_i2c0_pins>;
+ clock-frequency = <100000>;
+};
+
+&cp1_rtc {
+ status = "disabled";
+};
+
+&cp1_syscon0 {
+ cp1_pinctrl: pinctrl {
+ compatible = "marvell,cp115-standalone-pinctrl";
+ cp1_i2c0_pins: cp1-i2c-pins-0 {
+ marvell,pins = "mpp37", "mpp38";
+ marvell,function = "i2c0";
+ };
+ cp1_spi0_pins: cp1-spi-pins-0 {
+ marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+ marvell,function = "spi1";
+ };
+ cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins {
+ marvell,pins = "mpp3";
+ marvell,function = "gpio";
+ };
+ };
+};
+
+&cp1_thermal_ic {
+ PUZZLE_FAN_THERMAL(cp1, &chassis_fan_group0);
+};
+
+/*
+ * Instantiate the second connected CP115
+ */
+
+#define CP11X_NAME cp2
+#define CP11X_BASE f6000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xe5000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE f6600000
+#define CP11X_PCIE1_BASE f6620000
+#define CP11X_PCIE2_BASE f6640000
+
+#include "armada-cp115.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
+
+&cp2_crypto {
+ status = "okay";
+};
+
+&cp2_ethernet {
+ status = "okay";
+};
+
+&cp2_xmdio {
+ status = "okay";
+ cp2_nbaset_phy0: ethernet-phy@6 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <2>;
+ };
+ cp2_nbaset_phy1: ethernet-phy@7 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0>;
+ };
+ cp2_nbaset_phy2: ethernet-phy@8 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <8>;
+ };
+};
+
+/* SLM-1521-V2, CON9 */
+&cp2_eth0 {
+ status = "okay";
+ phy-mode = "10gbase-kr";
+ phys = <&cp2_comphy2 0>;
+ phy = <&cp2_nbaset_phy0>;
+};
+
+&cp2_eth1 {
+ status = "okay";
+ phy-mode = "2500base-x";
+ phys = <&cp2_comphy4 1>;
+ phy = <&cp2_nbaset_phy1>;
+};
+
+&cp2_eth2 {
+ status = "okay";
+ phy-mode = "2500base-x";
+ phys = <&cp2_comphy1 2>;
+ phy = <&cp2_nbaset_phy2>;
+};
+
+&cp2_gpio1 {
+ status = "okay";
+};
+
+&cp2_gpio2 {
+ status = "okay";
+};
+
+&cp2_i2c0 {
+ clock-frequency = <100000>;
+ /* SLM-1521-V2 - U3 */
+ i2c-mux@72 {
+ compatible = "nxp,pca9544";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x72>;
+ cp2_sfpp0_i2c: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ /* U12 */
+ cp2_module_expander1: pca9555@21 {
+ compatible = "nxp,pca9555";
+ pinctrl-names = "default";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x21>;
+ };
+ };
+ };
+};
+
+&cp2_rtc {
+ status = "disabled";
+};
+
+&cp2_syscon0 {
+ cp2_pinctrl: pinctrl {
+ compatible = "marvell,cp115-standalone-pinctrl";
+ cp2_i2c0_pins: cp2-i2c-pins-0 {
+ marvell,pins = "mpp37", "mpp38";
+ marvell,function = "i2c0";
+ };
+ };
+};
+
+&cp2_thermal_ic {
+ PUZZLE_FAN_THERMAL(cp2, &chassis_fan_group0);
+};
--- /dev/null
+#define PUZZLE_FAN_THERMAL(_cname, _fan) \
+ polling-delay-passive = <500>; \
+ polling-delay = <1000>; \
+ \
+ trips { \
+ cpu-hot { \
+ temperature = <75000>; \
+ hysteresis = <5000>; \
+ type = "hot"; \
+ }; \
+ _cname##_active_full: cpu-active-full { \
+ temperature = <70000>; \
+ hysteresis = <5000>; \
+ type = "active"; \
+ }; \
+ _cname##_active_high: cpu-active-high { \
+ temperature = <65000>; \
+ hysteresis = <5000>; \
+ type = "active"; \
+ }; \
+ _cname##_active_med: cpu-active-med { \
+ temperature = <62500>; \
+ hysteresis = <3000>; \
+ type = "active"; \
+ }; \
+ _cname##_active_low: cpu-active-low { \
+ temperature = <60000>; \
+ hysteresis = <3000>; \
+ type = "active"; \
+ }; \
+ _cname##_active_min: cpu-active-min { \
+ temperature = <55000>; \
+ hysteresis = <5000>; \
+ type = "active"; \
+ }; \
+ _cname##_active_idle: cpu-active-idle { \
+ temperature = <50000>; \
+ hysteresis = <5000>; \
+ type = "active"; \
+ }; \
+ }; \
+ cooling-maps { \
+ cpu-active-full { \
+ trip = <&_cname##_active_full>; \
+ cooling-device = <_fan THERMAL_NO_LIMIT \
+ THERMAL_NO_LIMIT>; \
+ }; \
+ cpu-active-high { \
+ trip = <&_cname##_active_high>; \
+ cooling-device = <_fan 4 5>; \
+ }; \
+ cpu-active-med { \
+ trip = <&_cname##_active_med>; \
+ cooling-device = <_fan 3 4>; \
+ }; \
+ cpu-active-low { \
+ trip = <&_cname##_active_low>; \
+ cooling-device = <_fan 2 3>; \
+ }; \
+ cpu-active-min { \
+ trip = <&_cname##_active_min>; \
+ cooling-device = <_fan 1 2>; \
+ }; \
+ cpu-active-idle { \
+ trip = <&_cname##_active_idle>; \
+ cooling-device = <_fan 0 0>; \
+ }; \
+ }
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-/*
- * Device Tree file for Buffalo LinkStation LS220DE
- *
- * Copyright (C) 2023 Daniel González Cabanelas <dgcbueu@gmail.com>
- */
-
-/dts-v1/;
-
-#include "armada-370.dtsi"
-#include "mvebu-linkstation-fan.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/thermal/thermal.h>
-
-/ {
- model = "Buffalo LinkStation LS220DE";
- compatible = "buffalo,ls220de", "marvell,armada370", "marvell,armada-370-xp";
-
- aliases {
- led-boot = &led_boot;
- led-failsafe = &led_failsafe;
- led-running = &led_power;
- led-upgrade = &led_upgrade;
- };
-
- chosen {
- bootargs = "earlycon";
- stdout-path = "serial0:115200n8";
- append-rootblock = "nullparameter="; /* override the bootloader args */
- };
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x10000000>; /* 256 MB */
- };
-
- soc {
- ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
- MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
- MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
- };
-
- system_fan: gpio_fan {
- gpios = <&gpio0 13 GPIO_ACTIVE_HIGH
- &gpio0 14 GPIO_ACTIVE_HIGH>;
- alarm-gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
-
- #cooling-cells = <2>;
- };
-
- thermal-zones {
- hdd-thermal {
- polling-delay = <20000>;
- polling-delay-passive = <2000>;
-
- thermal-sensors = <&hdd0_temp>; /* only one drivetemp sensor is supported */
-
- trips {
- hdd_alert1: trip1 {
- temperature = <34000>;
- hysteresis = <2000>;
- type = "active";
- };
- hdd_alert2: trip2 {
- temperature = <40000>;
- hysteresis = <2000>;
- type = "active";
- };
- hdd_alert3: trip3 {
- temperature = <45000>;
- hysteresis = <2000>;
- type = "passive";
- };
- hdd_hot {
- temperature = <50000>;
- hysteresis = <2000>;
- type = "hot";
- };
- hdd_crit {
- temperature = <60000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
-
- cooling-maps {
- map1 {
- trip = <&hdd_alert1>;
- cooling-device = <&system_fan THERMAL_NO_LIMIT 1>;
- };
- map2 {
- trip = <&hdd_alert2>;
- cooling-device = <&system_fan 2 2>;
- };
- map3 {
- trip = <&hdd_alert3>;
- cooling-device = <&system_fan 3 THERMAL_NO_LIMIT>;
- };
- };
- };
- };
-
- gpio_keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&pmx_buttons>;
- pinctrl-names = "default";
-
- power {
- label = "Power Switch";
- linux,code = <KEY_POWER>;
- linux,input-type = <EV_SW>;
- gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
- };
-
- function {
- label = "Function Button";
- linux,code = <KEY_CONFIG>;
- gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio_leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&pmx_leds1 &pmx_leds2>;
-
- indicator_red {
- function = LED_FUNCTION_INDICATOR;
- color = <LED_COLOR_ID_RED>;
- gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
- panic-indicator;
- };
-
- led_power: power_white {
- function = LED_FUNCTION_POWER;
- color = <LED_COLOR_ID_WHITE>;
- gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
-
- led_failsafe: power_red {
- function = LED_FUNCTION_POWER;
- color = <LED_COLOR_ID_RED>;
- gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
- };
-
- led_upgrade: power_orange {
- function = LED_FUNCTION_POWER;
- color = <LED_COLOR_ID_AMBER>;
- gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
- };
-
- led_boot: indicator_white {
- function = LED_FUNCTION_INDICATOR;
- color = <LED_COLOR_ID_WHITE>;
- gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
- };
-
- hdd1_red {
- function = LED_FUNCTION_DISK;
- color = <LED_COLOR_ID_RED>;
- gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "ata1";
- function-enumerator = <1>;
- };
-
- hdd2_red {
- function = LED_FUNCTION_DISK;
- color = <LED_COLOR_ID_RED>;
- gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "ata2";
- function-enumerator = <2>;
- };
- };
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_power_hdd1 &pmx_power_hdd2>;
- pinctrl-names = "default";
-
- sata1_power: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "HDD1";
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- startup-delay-us = <2000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>;
- };
-
- sata2_power: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "HDD2";
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- startup-delay-us = <4000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio0 2 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&coherencyfab {
- broken-idle;
-};
-
-ð1 {
- pinctrl-0 = <&ge1_rgmii_pins>;
- pinctrl-names = "default";
- status = "okay";
- phy-handle = <ðphy0>;
- phy-connection-type = "rgmii-id";
-};
-
-&mdio {
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
-
- ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */
- reg = <0>;
- marvell,reg-init = <0x3 0x10 0xf000 0x091A>, /* LED function */
- <0x3 0x11 0x0000 0x4401>, /* LED polarity */
- <0x3 0x12 0x0000 0x4905>; /* LED timer */
- #thermal-sensor-cells = <0>;
- };
-};
-
-&nand_controller {
- status = "okay";
-
- nand@0 {
- reg = <0>;
- label = "pxa3xx_nand-0";
- nand-rb = <0>;
- marvell,nand-keep-config;
- nand-on-flash-bbt;
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "ubi_kernel";
- reg = <0x00000000 0x02000000>; /* 32 MiB */
- };
-
- partition@2000000 {
- label = "ubi";
- reg = <0x02000000 0x1df00000>; /* 479 MiB */
- };
- };
- };
-};
-
-&sata {
- nr-ports = <2>;
- status = "okay";
- #address-cells = <1>;
- #size-cells = <0>;
-
- hdd0_temp: sata-port@0 {
- reg = <0>;
- #thermal-sensor-cells = <0>;
- };
-
- hdd1_temp: sata-port@1 {
- reg = <1>;
- #thermal-sensor-cells = <0>;
- };
-};
-
-&spi0 {
- status = "okay";
- pinctrl-0 = <&spi0_pins2>;
- pinctrl-names = "default";
-
- spi-flash@0 {
- compatible = "mxicy,mx25l8005", "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <50000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- reg = <0x00000 0xf0000>; /* 960 KiB*/
- label = "u-boot";
- read-only;
- };
- partition@f0000 {
- reg = <0xf0000 0x10000>; /* 64 KiB */
- label = "u-boot-env";
- };
- };
- };
-};
-
-&pmsu {
- pinctrl-0 = <&pmx_power_cpu>;
- pinctrl-names = "default";
-};
-
-&uart0 {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
-};
-
-&pinctrl {
- pmx_power_hdd2: pmx-power-hdd2 {
- marvell,pins = "mpp2";
- marvell,function = "gpio";
- };
-
- pmx_power_cpu: pmx-power-cpu {
- marvell,pins = "mpp4";
- marvell,function = "vdd";
- };
-
- pmx_power_hdd1: pmx-power-hdd1 {
- marvell,pins = "mpp8";
- marvell,function = "gpio";
- };
-
- pmx_fan_lock: pmx-fan-lock {
- marvell,pins = "mpp10";
- marvell,function = "gpio";
- };
-
- pmx_hdd_present: pmx-hdd-present {
- marvell,pins = "mpp11", "mpp12";
- marvell,function = "gpio";
- };
-
- pmx_fan_high: pmx-fan-high {
- marvell,pins = "mpp13";
- marvell,function = "gpio";
- };
-
- pmx_fan_low: pmx-fan-low {
- marvell,pins = "mpp14";
- marvell,function = "gpio";
- };
-
- pmx_buttons: pmx-buttons {
- marvell,pins = "mpp15", "mpp16";
- marvell,function = "gpio";
- };
-
- pmx_leds1: pmx-leds {
- marvell,pins = "mpp7", "mpp54", "mpp59", "mpp61";
- marvell,function = "gpo";
- };
-
- pmx_leds2: pmx-leds {
- marvell,pins = "mpp55", "mpp57", "mpp62";
- marvell,function = "gpio";
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-/*
- * Device Tree file for Buffalo LinkStation LS421DE
- *
- * Copyright (C) 2020 Daniel González Cabanelas <dgcbueu@gmail.com>
- */
-
-/dts-v1/;
-
-#include "armada-370.dtsi"
-#include "mvebu-linkstation-fan.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/thermal/thermal.h>
-
-/ {
- model = "Buffalo LinkStation LS421DE";
- compatible = "buffalo,ls421de", "marvell,armada370", "marvell,armada-370-xp";
-
- aliases {
- led-boot = &led_boot;
- led-failsafe = &led_failsafe;
- led-running = &led_power;
- led-upgrade = &led_upgrade;
- };
-
- chosen {
- bootargs = "earlycon";
- stdout-path = "serial0:115200n8";
- append-rootblock = "nullparameter="; /* override the bootloader args */
- };
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x20000000>; /* 512 MB */
- };
-
- soc {
- ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
- MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
- MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
- };
-
- system_fan: gpio_fan {
- gpios = <&gpio0 13 GPIO_ACTIVE_HIGH
- &gpio0 14 GPIO_ACTIVE_HIGH>;
- alarm-gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
-
- #cooling-cells = <2>;
- };
-
- thermal-zones {
- hdd-thermal {
- polling-delay = <20000>;
- polling-delay-passive = <2000>;
-
- thermal-sensors = <&hdd0_temp>; /* only one drivetemp sensor is supported */
-
- trips {
- hdd_alert1: trip1 {
- temperature = <36000>;
- hysteresis = <2000>;
- type = "active";
- };
- hdd_alert2: trip2 {
- temperature = <44000>;
- hysteresis = <2000>;
- type = "active";
- };
- hdd_alert3: trip3 {
- temperature = <52000>;
- hysteresis = <2000>;
- type = "passive";
- };
- hdd_crit: trip4 {
- temperature = <60000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
-
- cooling-maps {
- map1 {
- trip = <&hdd_alert1>;
- cooling-device = <&system_fan THERMAL_NO_LIMIT 1>;
- };
- map2 {
- trip = <&hdd_alert2>;
- cooling-device = <&system_fan 2 2>;
- };
- map3 {
- trip = <&hdd_alert3>;
- cooling-device = <&system_fan 3 THERMAL_NO_LIMIT>;
- };
- };
- };
-
- ethphy-thermal {
- polling-delay = <20000>;
- polling-delay-passive = <2000>;
-
- thermal-sensors = <ðphy0>;
-
- trips {
- ethphy_alert1: trip1 {
- temperature = <65000>;
- hysteresis = <4000>;
- type = "passive";
- };
-
- ethphy_crit: trip2 {
- temperature = <100000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
-
- cooling-maps {
- map1 {
- trip = <ðphy_alert1>;
- cooling-device = <&system_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
-
- };
- };
- };
-
- gpio_keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&pmx_buttons>;
- pinctrl-names = "default";
-
- power {
- label = "Power Switch";
- linux,code = <KEY_POWER>;
- linux,input-type = <EV_SW>;
- gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
- };
-
- function {
- label = "Function Button";
- linux,code = <KEY_CONFIG>;
- gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio_leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&pmx_leds1 &pmx_leds2>;
-
- system_red {
- label = "ls421de:red:system";
- gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
- };
-
- led_power: power_white {
- label = "ls421de:white:power";
- gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
-
- led_failsafe: power_red {
- label = "ls421de:red:power";
- gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
- };
-
- led_upgrade: power_orange {
- label = "ls421de:orange:power";
- gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
- };
-
- led_boot: system_white {
- label = "ls421de:white:system";
- gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
- };
-
- hdd1_red {
- label = "ls421de:red:hdd1";
- gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "ata1";
- };
-
- hdd2_red {
- label = "ls421de:red:hdd2";
- gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "ata2";
- };
- };
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_power_usb &pmx_power_hdd1 &pmx_power_hdd2>;
- pinctrl-names = "default";
-
- usb_power: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "USB";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio0 5 GPIO_ACTIVE_HIGH>;
- };
-
- sata1_power: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "HDD1";
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- startup-delay-us = <2000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>;
- };
-
- sata2_power: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "HDD2";
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- startup-delay-us = <4000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&coherencyfab {
- broken-idle;
-};
-
-ð1 {
- pinctrl-0 = <&ge1_rgmii_pins>;
- pinctrl-names = "default";
- status = "okay";
- phy-handle = <ðphy0>;
- phy-connection-type = "rgmii-id";
-};
-
-&i2c0 {
- pinctrl-0 = <&i2c0_pins>;
- pinctrl-names = "default";
- clock-frequency = <100000>;
- status = "okay";
-
- rs5c372a: rs5c372a@32 {
- compatible = "ricoh,rs5c372a";
- reg = <0x32>;
- wakeup-source;
- };
-};
-
-&mdio {
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
-
- ethphy0: ethernet-phy@0 { /* Marvell 88E1518 */
- reg = <0>;
- marvell,reg-init = <0x2 0x10 0xffff 0x0006>, /* disable CLK125 */
- <0x3 0x10 0x0000 0x1991>, /* LED function */
- <0x3 0x11 0x0000 0x4401>, /* LED polarity */
- <0x3 0x12 0x0000 0x4905>; /* LED timer */
- #thermal-sensor-cells = <0>;
- };
-};
-
-&pciec {
- status = "okay";
- pinctrl-0 = <&pmx_pcie>;
- pinctrl-names = "default";
-
- /* Connected to uPD720202 USB 3.0 Host */
- pcie@1,0 {
- status = "okay";
- };
-};
-
-&pmsu {
- pinctrl-0 = <&pmx_power_cpu>;
- pinctrl-names = "default";
-};
-
-&rtc {
- status = "disabled";
-};
-
-&sata {
- nr-ports = <2>;
- status = "okay";
- #address-cells = <1>;
- #size-cells = <0>;
-
- hdd0_temp: sata-port@0 {
- reg = <0>;
- #thermal-sensor-cells = <0>;
- };
-
- hdd1_temp: sata-port@1 {
- reg = <1>;
- #thermal-sensor-cells = <0>;
- };
-};
-
-&sdio {
- pinctrl-0 = <&sdio_pins2>;
- pinctrl-names = "default";
- status = "okay";
- /* No CD or WP GPIOs */
- broken-cd;
-};
-
-&uart0 {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
-};
-
-&nand_controller {
- status = "okay";
-
- nand@0 {
- reg = <0>;
- label = "pxa3xx_nand-0";
- nand-rb = <0>;
- marvell,nand-keep-config;
- nand-on-flash-bbt;
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "kernel";
- reg = <0x00000000 0x02000000>; /* 32 MiB */
- };
-
- partition@2000000 {
- label = "ubi";
- reg = <0x02000000 0x1e000000>; /* 480 MiB */
- };
- };
- };
-};
-
-&spi0 {
- status = "okay";
- pinctrl-0 = <&spi0_pins2>;
- pinctrl-names = "default";
-
- spi-flash@0 {
- compatible = "mxicy,mx25l8005", "jedec,spi-nor";
- reg = <0>; /* Chip select 0 */
- spi-max-frequency = <50000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- reg = <0x00000 0xf0000>; /* 960 KiB*/
- label = "u-boot";
- read-only;
- };
- partition@f0000 {
- reg = <0xf0000 0x10000>; /* 64 KiB */
- label = "u-boot-env";
- };
- };
- };
-};
-
-&pinctrl {
- pmx_power_cpu: pmx-power-cpu {
- marvell,pins = "mpp4";
- marvell,function = "vdd";
- };
-
- pmx_power_usb: pmx-power-usb {
- marvell,pins = "mpp5";
- marvell,function = "gpo";
- };
-
- pmx_power_hdd1: pmx-power-hdd1 {
- marvell,pins = "mpp8";
- marvell,function = "gpio";
- };
-
- pmx_power_hdd2: pmx-power-hdd2 {
- marvell,pins = "mpp9";
- marvell,function = "gpo";
- };
-
- pmx_fan_lock: pmx-fan-lock {
- marvell,pins = "mpp10";
- marvell,function = "gpio";
- };
-
- pmx_hdd_present: pmx-hdd-present {
- marvell,pins = "mpp11", "mpp12";
- marvell,function = "gpio";
- };
-
- pmx_fan_high: pmx-fan-high {
- marvell,pins = "mpp13";
- marvell,function = "gpio";
- };
-
- pmx_fan_low: pmx-fan-low {
- marvell,pins = "mpp14";
- marvell,function = "gpio";
- };
-
- pmx_buttons: pmx-buttons {
- marvell,pins = "mpp15", "mpp16";
- marvell,function = "gpio";
- };
-
- pmx_leds1: pmx-leds {
- marvell,pins = "mpp7", "mpp54", "mpp59", "mpp61";
- marvell,function = "gpo";
- };
-
- pmx_leds2: pmx-leds {
- marvell,pins = "mpp55", "mpp57", "mpp62";
- marvell,function = "gpio";
- };
-
- pmx_pcie: pmx-pcie {
- marvell,pins = "mpp56", "mpp60";
- marvell,function = "pcie";
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-/*
- * Device Tree file for Ctera C200-V2
- *
- * Copyright (C) 2021 Pawel Dembicki <paweldembicki@gmail.com>
- */
-
-/dts-v1/;
-
-#include "armada-370.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/thermal/thermal.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
- model = "Ctera C200 V2";
- compatible = "ctera,c200-v2", "marvell,armada370", "marvell,armada-370-xp";
-
- aliases {
- led-boot = &led_status_green;
- led-failsafe = &led_status_red;
- led-running = &led_status_green;
- led-upgrade = &led_status_red;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- stdout-path = "serial0:115200n8";
- };
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x40000000>; /* 1024 MB */
- };
-
- soc {
- ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
- MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
- MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
- };
-
- thermal-zones {
- ethphy-thermal {
- polling-delay = <20000>;
- polling-delay-passive = <2000>;
-
- thermal-sensors = <ðphy0>;
-
- trips {
- ethphy_alert1: trip1 {
- temperature = <65000>;
- hysteresis = <4000>;
- type = "passive";
- };
-
- ethphy_crit: trip2 {
- temperature = <100000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- };
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&pmx_buttons>;
- pinctrl-names = "default";
-
- power {
- label = "Power Button";
- linux,code = <KEY_POWER>;
- gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
- };
-
- reset {
- label = "Reset Button";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
- };
-
- usb1 {
- label = "USB1 Button";
- linux,code = <BTN_0>;
- gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
- };
-
- usb2 {
- label = "USB2 Button";
- linux,code = <BTN_1>;
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio-poweroff {
- compatible = "gpio-poweroff";
- pinctrl-0 = <&pmx_poweroff>;
- pinctrl-names = "default";
- gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&pmx_leds1 &pmx_leds2>;
- pinctrl-names = "default";
-
- led-0 {
- function = LED_FUNCTION_USB;
- function-enumerator = <2>;
- color = <LED_COLOR_ID_RED>;
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- };
-
- led-1 {
- function = LED_FUNCTION_USB;
- function-enumerator = <2>;
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "usbport";
- trigger-sources = <&usb1_port 1>, <&usb2_port 1>;
- };
-
- led-2 {
- function = LED_FUNCTION_USB;
- function-enumerator = <1>;
- color = <LED_COLOR_ID_RED>;
- gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
- };
-
- led-3 {
- function = LED_FUNCTION_USB;
- function-enumerator = <1>;
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "usbport";
- trigger-sources = <&usb1_port 2>, <&usb2_port 2>;
- };
-
- led-4 {
- function = LED_FUNCTION_DISK;
- function-enumerator = <2>;
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "ata2";
- };
-
- led-5 {
- function = LED_FUNCTION_DISK;
- function-enumerator = <1>;
- color = <LED_COLOR_ID_RED>;
- gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
- };
-
- led-6 {
- function = LED_FUNCTION_DISK;
- function-enumerator = <2>;
- color = <LED_COLOR_ID_RED>;
- gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
- };
-
- led-7 {
- function = LED_FUNCTION_INDICATOR;
- color = <LED_COLOR_ID_BLUE>;
- gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
- };
-
- led-8 {
- function = LED_FUNCTION_DISK_ERR;
- color = <LED_COLOR_ID_RED>;
- gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
- };
-
- led-9 {
- function = LED_FUNCTION_DISK_ERR;
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
- };
-
- led_status_red: led-10 {
- function = LED_FUNCTION_STATUS;
- color = <LED_COLOR_ID_RED>;
- gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
- };
-
- led-11 {
- function = LED_FUNCTION_DISK;
- function-enumerator = <1>;
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "ata1";
- };
-
- led_status_green: led-12 {
- function = LED_FUNCTION_STATUS;
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&coherencyfab {
- broken-idle;
-};
-
-ð1 {
- pinctrl-0 = <&ge1_rgmii_pins>;
- pinctrl-names = "default";
- status = "okay";
- phy-handle = <ðphy0>;
- phy-connection-type = "rgmii-id";
-};
-
-&i2c0 {
- pinctrl-0 = <&i2c0_pins>;
- pinctrl-names = "default";
- clock-frequency = <100000>;
- status = "okay";
-
- hwmon@2a {
- compatible = "nuvoton,nct7802";
- reg = <0x2a>;
- };
-
- rtc@30 {
- compatible = "sii,s35390a";
- reg = <0x30>;
- };
-};
-
-&mdio {
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
-
- ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */
- reg = <0>;
- #thermal-sensor-cells = <0>;
- };
-};
-
-&nand_controller {
- status = "okay";
-
- nand@0 {
- reg = <0>;
- label = "pxa3xx_nand-0";
- nand-rb = <0>;
- marvell,nand-keep-config;
- nand-on-flash-bbt;
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x0000000 0x200000>;
- read-only;
- };
-
- partition@200000 {
- label = "certificate";
- reg = <0x0200000 0x100000>;
- read-only;
- };
-
- partition@300000 {
- label = "preset_cfg";
- reg = <0x0300000 0x100000>;
- read-only;
- };
-
- partition@400000 {
- label = "dev_params";
- reg = <0x0400000 0x100000>;
- read-only;
- };
- partition@500000 {
- label = "active_bank";
- reg = <0x0500000 0x0100000>;
- };
-
- partition@600000 {
- label = "magic";
- reg = <0x0600000 0x0100000>;
- read-only;
- };
-
- partition@700000 {
- label = "bank1";
- reg = <0x0700000 0x2800000>;
- };
-
- partition@2f00000 {
- label = "bank2";
- reg = <0x2f00000 0x2800000>;
- };
-
- /* 0x5700000-0x5a00000 undefined in vendor firmware */
-
- partition@5a00000 {
- label = "reserved";
- reg = <0x5a00000 0x2000000>;
- };
-
- partition@7a00000 {
- label = "ubi";
- reg = <0x7a00000 0x8600000>;
- };
- };
- };
-};
-
-&pciec {
- status = "okay";
-
- pcie@1,0 {
- pinctrl-0 = <&pmx_pcie>;
- pinctrl-names = "default";
- status = "okay";
- reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
-
- /* -[0000:00]---01.0-[01]----00.0 */
- /* usbport trigger won't work */
- bridge@0,1 {
- compatible = "pci11ab,6710";
- reg = <0x3800 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
-
- usb@1,0 {
- /* Renesas uPD720202 */
- compatible = "pci1912,0015";
- reg = <0x1000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
-
- usb1_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <1>;
- };
-
- usb2_port: port@2 {
- reg = <2>;
- #trigger-source-cells = <1>;
- };
- };
- };
- };
-};
-
-&pinctrl {
- pmx_poweroff: pmx-poweroff {
- marvell,pins = "mpp7";
- marvell,function = "gpo";
- };
-
- pmx_power_cpu: pmx-power-cpu {
- marvell,pins = "mpp4";
- marvell,function = "vdd";
- };
-
- pmx_buttons: pmx-buttons {
- marvell,pins = "mpp6", "mpp10", "mpp14", "mpp32";
- marvell,function = "gpio";
- };
-
- pmx_leds1: pmx-leds1 {
- marvell,pins = "mpp47";
- marvell,function = "gpo";
- };
-
- pmx_leds2: pmx-leds2 {
- marvell,pins = "mpp12", "mpp13", "mpp15", "mpp16", "mpp50", "mpp51",
- "mpp52", "mpp53", "mpp55", "mpp56", "mpp57", "mpp58";
- marvell,function = "gpio";
- };
-
- pmx_pcie: pmx-pcie {
- marvell,pins = "mpp59";
- marvell,function = "gpio";
- };
-
- /* this gpio is connected to the pin of buzzer
- * leave it as is due lack of proper driver
- */
- pmx_buzzer: pmx-buzzer {
- marvell,pins = "mpp63";
- marvell,function = "gpio";
- };
-};
-
-&pmsu {
- pinctrl-0 = <&pmx_power_cpu>;
- pinctrl-names = "default";
-};
-
-&rtc {
- status = "disabled";
-};
-
-&sata {
- nr-ports = <2>;
- status = "okay";
- #address-cells = <1>;
- #size-cells = <0>;
-
- hdd0_temp: sata-port@0 {
- reg = <0>;
- #thermal-sensor-cells = <0>;
- };
-
- hdd1_temp: sata-port@1 {
- reg = <1>;
- #thermal-sensor-cells = <0>;
- };
-};
-
-&uart0 {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include "armada-380.dtsi"
-
-/ {
- model = "IIJ SA-W2";
- compatible = "iij,sa-w2", "marvell,armada380";
-
- aliases {
- led-boot = &led_power_green;
- led-failsafe = &led_power_red;
- led-running = &led_power_green;
- led-upgrade = &led_power_green;
- label-mac-device = &ge0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x00000000 0x10000000>; /* 256MB */
- };
-
- soc {
- ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
- MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
- MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
- MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
- MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
-
- pcie {
- status = "okay";
-
- pcie@1,0 {
- status = "okay";
- };
-
- pcie@3,0 {
- status = "okay";
- };
- };
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&pmx_keys_pins>;
-
- button-init {
- label = "init";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&pmx_leds_pins>;
-
- led-0 {
- gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_GREEN>;
- linux,default-trigger = "phy0tpt";
- };
-
- led-1 {
- gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_RED>;
- };
-
- led-2 {
- gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_STATUS;
- };
-
- led-3 {
- gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_RED>;
- function = LED_FUNCTION_STATUS;
- };
-
- led-4 {
- gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_GREEN>;
- };
-
- led-5 {
- gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_RED>;
- };
-
- led-6 {
- gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_GREEN>;
- linux,default-trigger = "phy1tpt";
- };
-
- led-7 {
- gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_RED>;
- };
-
- led_power_green: led-8 {
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- color = <LED_COLOR_ID_GREEN>;
- };
-
- led_power_red: led-9 {
- gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_RED>;
- };
-
- led-10 {
- gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
- color = <LED_COLOR_ID_GREEN>;
- linux,default-trigger = "usbport";
- trigger-sources = <&hub_port2>;
- };
-
- led-11 {
- gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
- color = <LED_COLOR_ID_GREEN>;
- linux,default-trigger = "usbport";
- trigger-sources = <&hub_port1>;
- };
- };
-
- regulator-vbus-usb0 {
- compatible = "regulator-fixed";
- regulator-name = "vbus-usb0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- regulator-always-on;
- };
-
- regulator-vbus-usb1 {
- compatible = "regulator-fixed";
- regulator-name = "vbus-usb1";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 21 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- regulator-always-on;
- };
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins>;
- status = "okay";
-};
-
-&pinctrl {
- pmx_usb_pins: usb-pins {
- marvell,pins = "mpp2", /* smsc usb2514b reset */
- "mpp48", "mpp49", /* port over current */
- "mpp52", "mpp53"; /* port vbus */
- marvell,function = "gpio";
- };
-
- pmx_keys_pins: keys-pins {
- marvell,pins = "mpp18";
- marvell,function = "gpio";
- };
-
- pmx_leds_pins: leds-pins {
- marvell,pins = "mpp19", "mpp20", "mpp33", "mpp34", "mpp35",
- "mpp36", "mpp44", "mpp45", "mpp46", "mpp47",
- "mpp54", "mpp55";
- marvell,function = "gpio";
- };
-};
-
-&gpio0 {
- usb-hub-reset {
- gpio-hog;
- gpios = <2 GPIO_ACTIVE_HIGH>;
- output-high;
- };
-};
-
-&usb0 {
- pinctrl-names = "default";
- pinctrl-0 = <&pmx_usb_pins>;
- status = "okay";
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* SMSC USB2514B on PCB */
- hub@1 {
- compatible = "usb424,2514";
- reg = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- hub_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-
- hub_port2: port@2 {
- reg = <2>;
- #trigger-source-cells = <0>;
- };
- };
-};
-
-&bm {
- status = "okay";
-};
-
-&bm_bppi {
- status = "okay";
-};
-
-ð1 {
- pinctrl-names = "default";
- pinctrl-0 = <&ge1_rgmii_pins>;
- status = "okay";
-
- phy-connection-type = "rgmii-id";
- buffer-manager = <&bm>;
- bm,pool-long = <2>;
- bm,pool-short = <3>;
-
- nvmem-cells = <&macaddr_bdinfo_6 1>;
- nvmem-cell-names = "mac-address";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&mdio {
- pinctrl-names = "default";
- pinctrl-0 = <&mdio_pins>;
- status = "okay";
-
- /* Marvell 88E6172 */
- switch@0 {
- compatible = "marvell,mv88e6085";
- reg = <0x0>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&gpio1>;
- interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- label = "ge1_0";
- };
-
- port@1 {
- reg = <1>;
- label = "ge1_1";
- };
-
- port@2 {
- reg = <2>;
- label = "ge1_2";
- };
-
- port@3 {
- reg = <3>;
- label = "ge1_3";
- };
-
- ge0: port@4 {
- reg = <4>;
- label = "ge0";
- nvmem-cells = <&macaddr_bdinfo_6 0>;
- nvmem-cell-names = "mac-address";
- };
-
- /*
- * eth0 is connected to port5 for WAN connection
- * on port4 ("GE0")
- */
-
- port@6 {
- reg = <6>;
- label = "cpu";
- ethernet = <ð1>;
- phy-connection-type = "rgmii-id";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
- };
- };
-};
-
-&rtc {
- status = "disabled";
-};
-
-&spi1 {
- pinctrl-names = "default";
- pinctrl-0 = <&spi1_pins>;
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <40000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- reg = <0x0 0x100000>;
- label = "bootloader";
- read-only;
- };
-
- partition@100000 {
- reg = <0x100000 0x10000>;
- label = "bootloader-env";
- read-only;
- };
-
- partition@110000 {
- reg = <0x110000 0xf0000>;
- label = "board_info";
- read-only;
-
- nvmem-layout {
- compatible = "fixed-layout";
- #address-cells = <1>;
- #size-cells = <1>;
-
- macaddr_bdinfo_6: macaddr@6 {
- compatible = "mac-base";
- reg = <0x6 0x6>;
- #nvmem-cell-cells = <1>;
- };
- };
- };
-
- partition@200000 {
- compatible = "iij,seil-firmware";
- reg = <0x200000 0xf00000>;
- label = "firmware";
- iij,bootdev-name = "flash";
- iij,seil-id = <0x5345494c 0x32303135>;
- };
-
- partition@1100000 {
- compatible = "iij,seil-firmware";
- reg = <0x1100000 0xf00000>;
- label = "rescue";
- iij,bootdev-name = "rescue";
- iij,seil-id = <0x5345494c 0x32303135>;
- };
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "armada-385-fortinet-fg-x0e.dtsi"
-
-/ {
- model = "Fortinet FortiGate 30E";
- compatible = "fortinet,fg-30e", "marvell,armada385", "marvell,armada380";
-
- memory@0 {
- device_type = "memory";
- reg = <0x00000000 0x40000000>; /* 1GB */
- };
-};
-
-&gpio_leds {
- led-14 {
- gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_AMBER>;
- linux,default-trigger = "mv88e6xxx-1:00:100Mbps";
- };
-
- led-15 {
- gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_GREEN>;
- linux,default-trigger = "mv88e6xxx-1:00:1Gbps";
- };
-};
-
-&pinctrl {
- pmx_switch_pins: switch-pins {
- marvell,pins = "mpp19";
- marvell,function = "gpio";
- };
-};
-
-&mdio {
- pinctrl-names = "default";
- pinctrl-0 = <&mdio_pins>, <&pmx_switch_pins>;
-
- /* Marvell 88E6176 */
- switch@2 {
- compatible = "marvell,mv88e6085";
- reg = <0x2>;
- reset-gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- label = "wan";
- nvmem-cells = <&macaddr_bdinfo_d880 1>;
- nvmem-cell-names = "mac-address";
- };
-
- port@1 {
- reg = <1>;
- label = "lan4";
- nvmem-cells = <&macaddr_bdinfo_d880 5>;
- nvmem-cell-names = "mac-address";
- };
-
- port@2 {
- reg = <2>;
- label = "lan3";
- nvmem-cells = <&macaddr_bdinfo_d880 4>;
- nvmem-cell-names = "mac-address";
- };
-
- port@3 {
- reg = <3>;
- label = "lan2";
- nvmem-cells = <&macaddr_bdinfo_d880 3>;
- nvmem-cell-names = "mac-address";
- };
-
- port@4 {
- reg = <4>;
- label = "lan1";
- nvmem-cells = <&macaddr_bdinfo_d880 2>;
- nvmem-cell-names = "mac-address";
- };
-
- port@6 {
- reg = <6>;
- ethernet = <ð0>;
- phy-connection-type = "rgmii-id";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "armada-385-fortinet-fg-x0e.dtsi"
-
-/ {
- model = "Fortinet FortiGate 50E";
- compatible = "fortinet,fg-50e", "marvell,armada385", "marvell,armada380";
-
- memory@0 {
- device_type = "memory";
- reg = <0x00000000 0x80000000>; /* 2GB */
- };
-};
-
-&gpio_leds {
- led-14 {
- gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_GREEN>;
- linux,default-trigger = "f1072004.mdio-mii:00:1Gbps";
- };
-
- led-15 {
- gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_GREEN>;
- linux,default-trigger = "f1072004.mdio-mii:01:1Gbps";
- };
-
- led-16 {
- gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_AMBER>;
- linux,default-trigger = "mv88e6xxx-1:00:100Mbps";
- };
-
- led-17 {
- gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_GREEN>;
- linux,default-trigger = "mv88e6xxx-1:00:1Gbps";
- };
-};
-
-&pinctrl {
- pmx_phy_switch_pins: phy-switch-pins {
- marvell,pins = "mpp19", "mpp20", "mpp23", "mpp34", "mpp41";
- marvell,function = "gpio";
- };
-};
-
-ð1 {
- status = "okay";
-
- phy-handle = <ðphy0>;
- phy-connection-type = "sgmii";
- buffer-manager = <&bm>;
- bm,pool-long = <2>;
- nvmem-cells = <&macaddr_bdinfo_d880 1>;
- nvmem-cell-names = "mac-address";
-};
-
-ð2 {
- status = "okay";
-
- phy-handle = <ðphy1>;
- phy-connection-type = "sgmii";
- buffer-manager = <&bm>;
- bm,pool-long = <3>;
- nvmem-cells = <&macaddr_bdinfo_d880 2>;
- nvmem-cell-names = "mac-address";
-};
-
-&mdio {
- pinctrl-names = "default";
- pinctrl-0 = <&mdio_pins>, <&pmx_phy_switch_pins>;
-
- /* Marvell 88E1512 */
- ethphy0: ethernet-phy@0 {
- compatible = "ethernet-phy-id0141,0dd1",
- "ethernet-phy-ieee802.3-c22";
- reg = <0>;
- interrupt-parent = <&gpio0>;
- interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
- reset-gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
- reset-assert-us = <10000>;
- reset-deassert-us = <10000>;
- /*
- * LINK/ACT (Green): LED[0], Active Low
- * SPEED 100M (Amber): LED[1], Active High
- */
- marvell,reg-init = <3 16 0 0x71>,
- <3 17 0 0x4>;
- };
-
- /* Marvell 88E1512 */
- ethphy1: ethernet-phy@1 {
- compatible = "ethernet-phy-id0141,0dd1",
- "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- interrupt-parent = <&gpio1>;
- interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
- reset-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
- reset-assert-us = <10000>;
- reset-deassert-us = <10000>;
- /*
- * LINK/ACT (Green): LED[0], Active Low
- * SPEED 100M (Amber): LED[1], Active High
- */
- marvell,reg-init = <3 16 0 0x71>,
- <3 17 0 0x4>;
- };
-
- /* Marvell 88E6176 */
- switch@2 {
- compatible = "marvell,mv88e6085";
- reg = <0x2>;
- reset-gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- label = "lan5";
- nvmem-cells = <&macaddr_bdinfo_d880 7>;
- nvmem-cell-names = "mac-address";
- };
-
- port@1 {
- reg = <1>;
- label = "lan4";
- nvmem-cells = <&macaddr_bdinfo_d880 6>;
- nvmem-cell-names = "mac-address";
- };
-
- port@2 {
- reg = <2>;
- label = "lan3";
- nvmem-cells = <&macaddr_bdinfo_d880 5>;
- nvmem-cell-names = "mac-address";
- };
-
- port@3 {
- reg = <3>;
- label = "lan2";
- nvmem-cells = <&macaddr_bdinfo_d880 4>;
- nvmem-cell-names = "mac-address";
- };
-
- port@4 {
- reg = <4>;
- label = "lan1";
- nvmem-cells = <&macaddr_bdinfo_d880 3>;
- nvmem-cell-names = "mac-address";
- };
-
- port@6 {
- reg = <6>;
- ethernet = <ð0>;
- phy-connection-type = "rgmii-id";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include "armada-385.dtsi"
-
-/ {
- aliases {
- led-boot = &led_status_green;
- led-failsafe = &led_status_red;
- led-running = &led_status_green;
- led-upgrade = &led_status_green;
- label-mac-device = ð0;
- };
-
- chosen {
- stdout-path = "serial0:9600n8";
- };
-
- soc {
- ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
- MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
- MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
- MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
- MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&pmx_gpio_keys_pins>;
-
- reset {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio_leds: gpio-leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&pmx_gpio_leds_pins>;
-
- led-0 {
- gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
- color = <LED_COLOR_ID_RED>;
- function = LED_FUNCTION_ALARM;
- };
-
- led-1 {
- gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
- color = <LED_COLOR_ID_RED>;
- };
-
- led_status_green: led-2 {
- gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_STATUS;
- };
-
- led-3 {
- gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
- color = <LED_COLOR_ID_GREEN>;
- };
-
- led-4 {
- gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
- color = <LED_COLOR_ID_AMBER>;
- function = LED_FUNCTION_ALARM;
- };
-
- led_status_red: led-5 {
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- color = <LED_COLOR_ID_RED>;
- function = LED_FUNCTION_STATUS;
- };
-
- led-6 {
- gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
- color = <LED_COLOR_ID_GREEN>;
- linux,default-trigger = "mv88e6xxx-1:01:1Gbps";
- };
-
- led-7 {
- gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
- color = <LED_COLOR_ID_AMBER>;
- linux,default-trigger = "mv88e6xxx-1:01:100Mbps";
- };
-
- led-8 {
- gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
- color = <LED_COLOR_ID_AMBER>;
- linux,default-trigger = "mv88e6xxx-1:02:100Mbps";
- };
-
- led-9 {
- gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
- color = <LED_COLOR_ID_GREEN>;
- linux,default-trigger = "mv88e6xxx-1:02:1Gbps";
- };
-
- led-10 {
- gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
- color = <LED_COLOR_ID_GREEN>;
- linux,default-trigger = "mv88e6xxx-1:04:1Gbps";
- };
-
- led-11 {
- gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
- color = <LED_COLOR_ID_AMBER>;
- linux,default-trigger = "mv88e6xxx-1:04:100Mbps";
- };
-
- led-12 {
- gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
- color = <LED_COLOR_ID_GREEN>;
- linux,default-trigger = "mv88e6xxx-1:03:1Gbps";
- };
-
- led-13 {
- gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
- color = <LED_COLOR_ID_AMBER>;
- linux,default-trigger = "mv88e6xxx-1:03:100Mbps";
- };
- };
-
- reg_usb_vbus: regulator-usb-vbus {
- compatible = "fixed-regulator";
- regulator-name = "usb-vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 21 GPIO_ACTIVE_LOW>;
- regulator-always-on;
- };
-};
-
-&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins>;
- status = "okay";
-
- gpio2: gpio@24 {
- compatible = "nxp,pca9555";
- reg = <0x24>;
- gpio-controller;
- #gpio-cells = <0x2>;
- };
-
- hwmon@28 {
- compatible = "nuvoton,nct7802";
- reg = <0x28>;
- };
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins>;
- status = "okay";
-};
-
-&pinctrl {
- pmx_gpio_leds_pins: gpio-leds-pins {
- marvell,pins = "mpp30", "mpp32", "mpp33", "mpp35",
- "mpp45", "mpp47";
- marvell,function = "gpio";
- };
-
- pmx_usb_pins: usb-pins {
- marvell,pins = "mpp53";
- marvell,function = "gpio";
- };
-
- pmx_gpio_keys_pins: gpio-keys-pins {
- marvell,pins = "mpp54";
- marvell,function = "gpio";
- };
-};
-
-&bm {
- status = "okay";
-};
-
-&bm_bppi {
- status = "okay";
-};
-
-ð0 {
- pinctrl-names = "default";
- pinctrl-0 = <&ge0_rgmii_pins>;
- status = "okay";
-
- phy-connection-type = "rgmii-id";
- buffer-manager = <&bm>;
- bm,pool-long = <0>;
- bm,pool-short = <1>;
- nvmem-cells = <&macaddr_bdinfo_d880 0>;
- nvmem-cell-names = "mac-address";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&usb3_0 {
- pinctrl-names = "default";
- pinctrl-0 = <&pmx_usb_pins>;
- status = "okay";
-
- vbus-supply = <®_usb_vbus>;
-};
-
-&spi1 {
- pinctrl-names = "default";
- pinctrl-0 = <&spi1_pins>;
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <50000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- reg = <0x0 0x1c0000>;
- label = "u-boot";
- read-only;
- };
-
- partition@1c0000 {
- reg = <0x1c0000 0x10000>;
- label = "firmware-info";
-
- /*
- * 0x10 - 0x2f : image name (image1)
- * 0x30 - 0x4f : image name (image2)
- * 0x170 (1byte): active image (0x0/0x1)
- * 0x184 - 0x185: kernel block count (image1)
- * 0x18c - 0x18d: rootfs block count (image1)
- * 0x194 - 0x195: kernel block count (image2)
- * 0x19c - 0x19d: rootfs block count (image2)
- * 0x1be (1byte): bit7 -> active flag (image1)?
- * 0x1ce (1byte): bit7 -> active flag (image2)?
- *
- * Note: block size --> 0x200 (512 bytes)
- */
- };
-
- partition@1d0000 {
- reg = <0x1d0000 0x10000>;
- label = "dtb";
- read-only;
- };
-
- partition@1e0000 {
- reg = <0x1e0000 0x10000>;
- label = "u-boot-env";
- read-only;
- };
-
- partition@1f0000 {
- reg = <0x1f0000 0x10000>;
- label = "board-info";
- read-only;
-
- nvmem-layout {
- compatible = "fixed-layout";
- #address-cells = <1>;
- #size-cells = <1>;
-
- macaddr_bdinfo_d880: macaddr@d880 {
- compatible = "mac-base";
- reg = <0xd880 0x6>;
- #nvmem-cell-cells = <1>;
- };
- };
- };
-
- partition@200000 {
- reg = <0x200000 0x600000>;
- label = "kernel";
- };
-
- partition@800000 {
- reg = <0x800000 0x1800000>;
- label = "rootfs";
- };
-
- partition@2000000 {
- reg = <0x2000000 0x600000>;
- label = "kn2";
- read-only;
- };
-
- partition@2600000 {
- reg = <0x2600000 0x1800000>;
- label = "rfs2";
- read-only;
- };
-
- partition@3e00000 {
- reg = <0x3e00000 0x1200000>;
- label = "part1";
- read-only;
- };
-
- partition@5000000 {
- reg = <0x5000000 0x1200000>;
- label = "part2";
- read-only;
- };
-
- partition@6200000 {
- reg = <0x6200000 0x1e00000>;
- label = "config";
- read-only;
- };
- };
- };
-};
+++ /dev/null
-/*
- * Device Tree file for the Linksys WRT32X (Venom)
- *
- * Copyright (C) 2017 Imre Kaloz <kaloz@openwrt.org>
- *
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "armada-385-linksys.dtsi"
-
-/ {
- model = "Linksys WRT32X";
- compatible = "linksys,wrt32x", "linksys,venom", "linksys,armada385",
- "marvell,armada385", "marvell,armada380";
-
- chosen {
- bootargs = "console=ttyS0,115200";
- stdout-path = "serial0:115200n8";
- append-rootblock = "root=/dev/mtdblock";
- };
-};
-
-&expander0 {
- wan_amber@0 {
- label = "venom:amber:wan";
- reg = <0x0>;
- };
-
- wan_blue@1 {
- label = "venom:blue:wan";
- reg = <0x1>;
- };
-
- usb2@5 {
- label = "venom:blue:usb2";
- reg = <0x5>;
- };
-
- usb3_1@6 {
- label = "venom:blue:usb3_1";
- reg = <0x6>;
- };
-
- usb3_2@7 {
- label = "venom:blue:usb3_2";
- reg = <0x7>;
- };
-
- wps_blue@8 {
- label = "venom:blue:wps";
- reg = <0x8>;
- };
-
- wps_amber@9 {
- label = "venom:amber:wps";
- reg = <0x9>;
- };
-};
-
-&gpio_leds {
- power {
- gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
- label = "venom:blue:power";
- };
-
- sata {
- gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
- label = "venom:blue:sata";
- };
-
- wlan_2g {
- gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
- label = "venom:blue:wlan_2g";
- };
-
- wlan_5g {
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- label = "venom:blue:wlan_5g";
- };
-};
-
-&gpio_leds_pins {
- marvell,pins = "mpp21", "mpp45", "mpp46", "mpp56";
-};
-
-&nand {
- /* Spansion S34ML02G2 256MiB, OEM Layout */
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0000000 0x200000>; /* 2MB */
- read-only;
- };
-
- partition@200000 {
- label = "u_env";
- reg = <0x200000 0x20000>; /* 128KB */
- };
-
- partition@220000 {
- label = "s_env";
- reg = <0x220000 0x40000>; /* 256KB */
- };
-
- partition@180000 {
- label = "unused_area";
- reg = <0x260000 0x5c0000>; /* 5.75MB */
- };
-
- partition@7e0000 {
- label = "devinfo";
- reg = <0x7e0000 0x40000>; /* 256KB */
- read-only;
- };
-
- /* kernel1 overlaps with rootfs1 by design */
- partition@900000 {
- label = "kernel1";
- reg = <0x900000 0x7b00000>; /* 123MB */
- };
-
- partition@f00000 {
- label = "rootfs1";
- reg = <0xf00000 0x7500000>; /* 117MB */
- };
-
- /* kernel2 overlaps with rootfs2 by design */
- partition@8400000 {
- label = "kernel2";
- reg = <0x8400000 0x7b00000>; /* 123MB */
- };
-
- partition@8a00000 {
- label = "rootfs2";
- reg = <0x8a00000 0x7500000>; /* 117MB */
- };
-
- /* last MB is for the BBT, not writable */
- partition@ff00000 {
- label = "BBT";
- reg = <0xff00000 0x100000>;
- };
- };
-};
-
-
-&pcie1 {
- mwlwifi {
- marvell,chainmask = <4 4>;
- };
-};
-
-&pcie2 {
- mwlwifi {
- marvell,chainmask = <4 4>;
- };
-};
-
-&sdhci {
- pinctrl-names = "default";
- pinctrl-0 = <&sdhci_pins>;
- no-1-8-v;
- non-removable;
- wp-inverted;
- bus-width = <8>;
- status = "okay";
-};
-
-&usb3_1_vbus {
- gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-};
-
-&usb3_1_vbus_pins {
- marvell,pins = "mpp44";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
-/*
- * Device Tree file for ipTIME NAS1dual
- *
- * Copyright (C) 2020 Sungbo Eo <mans0n@gorani.run>
- *
- * Based on armada-385-linksys.dtsi
- * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include "armada-385.dtsi"
-
-/ {
- model = "ipTIME NAS1dual";
- compatible = "iptime,nas1dual", "marvell,armada385", "marvell,armada380";
-
- aliases {
- led-boot = &led_ready;
- led-failsafe = &led_ready;
- led-running = &led_ready;
- led-upgrade = &led_ready;
- label-mac-device = ð0;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200n8";
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x00000000 0x80000000>; /* 2GB */
- };
-
- soc {
- ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
- MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
- MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
- MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
- MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&gpio_keys_pins>;
-
- power {
- label = "Power Button";
- linux,input-type = <EV_SW>;
- linux,code = <KEY_POWER>;
- gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
- };
-
- reset {
- label = "Reset Button";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
- };
-
- copy {
- label = "USB Copy Button";
- linux,code = <KEY_COPY>;
- gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&gpio_leds_pins>;
-
- led_ready: ready {
- label = "blue:ready";
- gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
- };
-
- hdd {
- label = "blue:hdd";
- gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "disk-activity";
- };
-
- usb {
- function = LED_FUNCTION_USB;
- color = <LED_COLOR_ID_BLUE>;
- gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
- trigger-sources = <&usb3_0_port1 &usb3_0_port2>;
- linux,default-trigger = "usbport";
- };
- };
-
- gpio-fan {
- compatible = "gpio-fan";
- pinctrl-names = "default";
- pinctrl-0 = <&gpio_fan_pins>;
- gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>,
- <&gpio1 18 GPIO_ACTIVE_HIGH>;
- /* We don't know the exact rpm, just use dummy values here. */
- gpio-fan,speed-map = <0 0>, <1 1>, <2 2>;
- #cooling-cells = <2>;
- };
-
- gpio-poweroff {
- compatible = "gpio-poweroff";
- gpios = <&pca9536 1 GPIO_ACTIVE_LOW>;
- };
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&sata_power_pins>;
-
- reg_sata_power: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "sata-power";
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- gpio = <&gpio1 20 GPIO_ACTIVE_LOW>;
- regulator-always-on;
- };
- };
-};
-
-&ahci0 {
- status = "okay";
- #address-cells = <1>;
- #size-cells = <0>;
-
- sata-port@0 {
- reg = <0>;
- target-supply = <®_sata_power>;
- #thermal-sensor-cells = <0>;
- };
-};
-
-&bm {
- status = "okay";
-};
-
-&bm_bppi {
- status = "okay";
-};
-
-ð0 {
- pinctrl-names = "default";
- pinctrl-0 = <&ge0_rgmii_pins>;
- status = "okay";
- phy-handle = <ðphy1>;
- phy-connection-type = "rgmii-id";
- buffer-manager = <&bm>;
- bm,pool-long = <0>;
- bm,pool-short = <1>;
- nvmem-cells = <&macaddr_uboot_fffa8>;
- nvmem-cell-names = "mac-address";
-};
-
-ð1 {
- pinctrl-names = "default";
- pinctrl-0 = <&ge1_rgmii_pins>;
- status = "okay";
- phy-handle = <ðphy0>;
- phy-connection-type = "rgmii-id";
- buffer-manager = <&bm>;
- bm,pool-long = <2>;
- bm,pool-short = <3>;
- nvmem-cells = <&macaddr_uboot_fffa8>;
- nvmem-cell-names = "mac-address";
-};
-
-&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins>;
- status = "okay";
-
- pca9536: gpio@41 {
- compatible = "nxp,pca9536";
- reg = <0x41>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-line-names = "power-led", "power-board";
- };
-};
-
-&mdio {
- pinctrl-names = "default";
- pinctrl-0 = <&mdio_pins>;
-
- /* LED1: On - Link, Blink - Activity, Off - No Link */
-
- ethphy0: ethernet-phy@0 {
- reg = <0>;
- marvell,reg-init = <3 16 0 0x1017>;
- };
-
- ethphy1: ethernet-phy@1 {
- reg = <1>;
- marvell,reg-init = <3 16 0 0x1017>;
- };
-};
-
-&pinctrl {
- gpio_keys_pins: gpio-keys-pins {
- marvell,pins = "mpp24", "mpp26", "mpp48";
- marvell,function = "gpio";
- };
-
- gpio_leds_pins: gpio-leds-pins {
- marvell,pins = "mpp18", "mpp20", "mpp51";
- marvell,function = "gpio";
- };
-
- gpio_fan_pins: gpio-fan-pins {
- marvell,pins = "mpp25", "mpp50";
- marvell,function = "gpio";
- };
-
- sata_power_pins: sata-power-pins {
- marvell,pins = "mpp52";
- marvell,function = "gpio";
- };
-
- uart1_pins_alt: uart-pins-1-alt {
- marvell,pins = "mpp45", "mpp46";
- marvell,function = "ua1";
- };
-};
-
-&spi1 {
- pinctrl-names = "default";
- pinctrl-0 = <&spi1_pins>;
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <40000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- reg = <0x00000000 0x00100000>;
- label = "u-boot";
- read-only;
-
- nvmem-layout {
- compatible = "fixed-layout";
- #address-cells = <1>;
- #size-cells = <1>;
-
- macaddr_uboot_fffa8: macaddr@fffa8 {
- reg = <0xfffa8 0x6>;
- };
- };
- };
-
- partition@100000 {
- reg = <0x00100000 0x03ec0000>;
- label = "firmware";
-
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- reg = <0x00000000 0x00600000>;
- label = "kernel";
- };
-
- partition@600000 {
- reg = <0x00600000 0x038c0000>;
- label = "rootfs";
- };
- };
-
- partition@3fc0000 {
- reg = <0x03fc0000 0x00040000>;
- label = "config";
- read-only;
- };
- };
- };
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins>;
- status = "okay";
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins_alt>;
- status = "okay";
-};
-
-&usb3_0 {
- status = "okay";
- #address-cells = <1>;
- #size-cells = <0>;
-
- usb3_0_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-
- usb3_0_port2: port@2 {
- reg = <2>;
- #trigger-source-cells = <0>;
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-
-/dts-v1/;
-
-#include "armada-3720-uDPU.dtsi"
-
-/ {
- model = "Methode eDPU Board";
- compatible = "methode,edpu", "marvell,armada3720", "marvell,armada3710";
-};
-
-/* PHY mode is set to 1000Base-X despite Maxlinear IC being capable of
- * 2500Base-X since until 5.15 support for mvebu is available trying to
- * use 2500Base-X will cause buffer overruns for which the fix is not
- * easily backportable.
- */
-ð0 {
- phy-mode = "1000base-x";
-};
-
-/*
- * External MV88E6361 switch is only available on v2 of the board.
- * U-Boot will enable the MDIO bus and switch nodes.
- */
-&mdio {
- status = "disabled";
- pinctrl-names = "default";
- pinctrl-0 = <&smi_pins>;
-
- /* Actual device is MV88E6361 */
- switch: switch@0 {
- compatible = "marvell,mv88e6190";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- status = "disabled";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- label = "cpu";
- phy-mode = "2500base-x";
- managed = "in-band-status";
- ethernet = <ð0>;
- };
-
- port@9 {
- reg = <9>;
- label = "downlink";
- phy-mode = "2500base-x";
- managed = "in-band-status";
- };
-
- port@a {
- reg = <10>;
- label = "uplink";
- phy-mode = "2500base-x";
- managed = "in-band-status";
- sfp = <&sfp_eth1>;
- };
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for ESPRESSObin-Ultra
- * Copyright (C) 2019 Globalscale technologies, Inc.
- *
- * Jason Hung <jhung@globalscaletechnologies.com>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-372x.dtsi"
-
-/ {
- model = "Globalscale Marvell ESPRESSOBin Ultra Board";
- compatible = "globalscale,espressobin-ultra", "marvell,armada3720",
- "marvell,armada3710";
-
- aliases {
- /* for dsa slave device */
- ethernet1 = &switch0port1;
- ethernet2 = &switch0port2;
- ethernet3 = &switch0port3;
- ethernet4 = &switch0port4;
- ethernet5 = &switch0port5;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
- };
-
- reg_usb3_vbus: usb3-vbus {
- compatible = "regulator-fixed";
- regulator-name = "usb3-vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- gpio = <&gpionb 19 GPIO_ACTIVE_HIGH>;
- };
-
- usb3_phy: usb3-phy {
- compatible = "usb-nop-xceiv";
- vcc-supply = <®_usb3_vbus>;
- };
-
- leds {
- pinctrl-names = "default";
- compatible = "gpio-leds";
- /* No assigned functions to the LEDs by default */
- led1 {
- label = "ebin-ultra:blue:led1";
- gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
- };
- led2 {
- label = "ebin-ultra:green:led2";
- gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
- };
- led3 {
- label = "ebin-ultra:red:led3";
- gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
- };
- led4 {
- label = "ebin-ultra:yellow:led4";
- gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&pcie0 {
- status = "okay";
-};
-
-&sata {
- status = "okay";
-};
-
-&sdhci0 {
- status = "okay";
- non-removable;
- bus-width = <8>;
- mmc-ddr-1_8v;
- mmc-hs400-1_8v;
- marvell,pad-type = "fixed-1-8v";
-};
-
-&spi0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&spi_quad_pins>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <108000000>;
- spi-rx-bus-width = <4>;
- spi-tx-bus-width = <4>;
- m25p,fast-read;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "firmware";
- reg = <0x0 0x3e0000>;
- };
- partition@3e0000 {
- label = "hw-info";
- reg = <0x3e0000 0x10000>;
- read-only;
- };
- partition@3f0000 {
- label = "u-boot-env";
- reg = <0x3f0000 0x10000>;
- };
- };
- };
-};
-
-&uart0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins>;
-};
-
-&i2c0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
-
- clock-frequency = <100000>;
-
- rtc@51 {
- compatible = "nxp,pcf8563";
- reg = <0x51>;
- };
-};
-
-&usb3 {
- status = "okay";
- usb-phy = <&usb3_phy>;
-};
-
-&usb2 {
- status = "okay";
-};
-
-ð0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
- phy-mode = "rgmii-id";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&mdio {
- status = "okay";
-
- extphy: ethernet-phy@0 {
- reg = <1>;
- };
-
- switch0: switch0@1 {
- compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
-
- dsa,member = <0 0>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- switch0port0: port@0 {
- reg = <0>;
- ethernet = <ð0>;
- };
-
- switch0port1: port@1 {
- reg = <1>;
- label = "lan0";
- phy-handle = <&switch0phy1>;
- };
-
- switch0port2: port@2 {
- reg = <2>;
- label = "lan1";
- phy-handle = <&switch0phy2>;
- };
-
- switch0port3: port@3 {
- reg = <3>;
- label = "lan2";
- phy-handle = <&switch0phy3>;
- };
-
- switch0port4: port@4 {
- reg = <4>;
- label = "lan3";
- phy-handle = <&switch0phy4>;
- };
-
- switch0port5: port@5 {
- reg = <5>;
- label = "wan";
- phy-handle = <&extphy>;
- phy-mode = "sgmii";
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- switch0phy1: switch0phy1@11 {
- reg = <0x11>;
- };
- switch0phy2: switch0phy2@12 {
- reg = <0x12>;
- };
- switch0phy3: switch0phy3@13 {
- reg = <0x13>;
- };
- switch0phy4: switch0phy4@14 {
- reg = <0x14>;
- };
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include "armada-372x.dtsi"
-
-/ {
- model = "GL.iNet GL-MV1000";
- compatible = "glinet,gl-mv1000", "marvell,armada3720";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
- };
-
- vcc_sd_reg1: regulator {
- compatible = "regulator-gpio";
- regulator-name = "vcc_sd1";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
-
- gpios-states = <0>;
- states = <1800000 0x1
- 3300000 0x0>;
- enable-active-high;
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
- };
-
- switch {
- label = "switch";
- linux,code = <BTN_0>;
- gpios = <&gpiosb 22 GPIO_ACTIVE_LOW>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- vpn {
- label = "green:vpn";
- gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
- };
-
- wan {
- function = LED_FUNCTION_WAN;
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
- };
-
- led_power: power {
- function = LED_FUNCTION_POWER;
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- flash@0 {
- reg = <0>;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <104000000>;
- m25p,fast-read;
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0 0xf0000>;
- read-only;
- };
-
- partition@f0000 {
- label = "u-boot-env";
- reg = <0xf0000 0x8000>;
- read-only;
- };
-
- factory: partition@f8000 {
- label = "factory";
- reg = <0xf8000 0x8000>;
- read-only;
-
- nvmem-layout {
- compatible = "fixed-layout";
- #address-cells = <1>;
- #size-cells = <1>;
-
- macaddr_factory_0: macaddr@0 {
- reg = <0x0 0x6>;
- };
-
- macaddr_factory_6: macaddr@6 {
- reg = <0x6 0x6>;
- };
- };
- };
-
- partition@100000 {
- label = "gl-firmware-dtb";
- reg = <0x100000 0x10000>;
- read-only;
- };
-
- partition@110000 {
- label = "gl-firmware";
- reg = <0x110000 0xef0000>;
- read-only;
- };
-
- partition@ef0000 {
- label = "gl-firmware-jffs2";
- reg = <0xef0000 0x110000>;
- read-only;
- };
- };
- };
-};
-
-&sdhci1 {
- wp-inverted;
- bus-width = <4>;
- cd-gpios = <&gpionb 17 GPIO_ACTIVE_LOW>;
- marvell,pad-type = "sd";
- no-1-8-v;
- vqmmc-supply = <&vcc_sd_reg1>;
- status = "okay";
-};
-
-&sdhci0 {
- bus-width = <8>;
- mmc-ddr-1_8v;
- mmc-hs400-1_8v;
- non-removable;
- no-sd;
- no-sdio;
- marvell,pad-type = "fixed-1-8v";
- status = "okay";
-};
-
-&usb3 {
- status = "okay";
-};
-
-&usb2 {
- status = "okay";
-};
-
-&uart0 {
- status = "okay";
-};
-
-&mdio {
- switch0: switch0@1 {
- compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
-
- dsa,member = <0 0>;
-
- ports: ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- ethernet = <ð0>;
- };
-
- port@1 {
- reg = <1>;
- label = "wan";
- phy-handle = <&switch0phy0>;
- };
-
- port@2 {
- reg = <2>;
- label = "lan0";
- phy-handle = <&switch0phy1>;
-
- nvmem-cells = <&macaddr_factory_6>;
- nvmem-cell-names = "mac-address";
- };
-
- port@3 {
- reg = <3>;
- label = "lan1";
- phy-handle = <&switch0phy2>;
-
- nvmem-cells = <&macaddr_factory_6>;
- nvmem-cell-names = "mac-address";
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- switch0phy0: switch0phy0@11 {
- reg = <0x11>;
- };
- switch0phy1: switch0phy1@12 {
- reg = <0x12>;
- };
- switch0phy2: switch0phy2@13 {
- reg = <0x13>;
- };
- };
- };
-};
-
-ð0 {
- nvmem-cells = <&macaddr_factory_0>;
- nvmem-cell-names = "mac-address";
- phy-mode = "rgmii-id";
- status = "okay";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-
-/dts-v1/;
-
-#include "armada-3720-uDPU.dtsi"
-
-/ {
- model = "Methode uDPU Board";
- compatible = "methode,udpu", "marvell,armada3720", "marvell,armada3710";
-
- sfp_eth0: sfp-eth0 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c0>;
- los-gpio = <&gpiosb 2 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&gpiosb 3 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&gpiosb 4 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&gpiosb 5 GPIO_ACTIVE_HIGH>;
- maximum-power-milliwatt = <3000>;
- };
-};
-
-&pinctrl_nb {
- i2c1_recovery_pins: i2c1-recovery-pins {
- groups = "i2c1";
- function = "gpio";
- };
-};
-
-&i2c0 {
- status = "okay";
- pinctrl-names = "default", "recovery";
- pinctrl-0 = <&i2c1_pins>;
- pinctrl-1 = <&i2c1_recovery_pins>;
- /delete-property/mrvl,i2c-fast-mode;
- scl-gpios = <&gpionb 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- sda-gpios = <&gpionb 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-};
-
-ð0 {
- phy-mode = "2500base-x";
- sfp = <&sfp_eth0>;
-};
-
-ð1 {
- phy-mode = "2500base-x";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device tree for the uDPU board.
- * Based on Marvell Armada 3720 development board (DB-88F3720-DDR3)
- * Copyright (C) 2016 Marvell
- * Copyright (C) 2019 Methode Electronics
- * Copyright (C) 2019 Telus
- *
- * Vladimir Vid <vladimir.vid@sartura.hr>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-372x.dtsi"
-
-/ {
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
- };
-
- aliases {
- ethernet0 = ð0;
- ethernet1 = ð1;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led-power1 {
- label = "udpu:green:power";
- gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
- };
-
- led-power2 {
- label = "udpu:red:power";
- gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
- };
-
- led-network1 {
- label = "udpu:green:network";
- gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
- };
-
- led-network2 {
- label = "udpu:red:network";
- gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
- };
-
- led-alarm1 {
- label = "udpu:green:alarm";
- gpios = <&gpionb 15 GPIO_ACTIVE_LOW>;
- };
-
- led-alarm2 {
- label = "udpu:red:alarm";
- gpios = <&gpionb 16 GPIO_ACTIVE_LOW>;
- };
- };
-
- sfp_eth1: sfp-eth1 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c1>;
- los-gpio = <&gpiosb 7 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>;
- maximum-power-milliwatt = <3000>;
- };
-};
-
-&sdhci0 {
- status = "okay";
- bus-width = <8>;
- mmc-ddr-1_8v;
- mmc-hs400-1_8v;
- marvell,pad-type = "fixed-1-8v";
- non-removable;
- no-sd;
- no-sdio;
-};
-
-&spi0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&spi_quad_pins>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <54000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "firmware";
- reg = <0x0 0x180000>;
- };
-
- partition@180000 {
- label = "u-boot-env";
- reg = <0x180000 0x10000>;
- };
- };
- };
-};
-
-&pinctrl_nb {
- i2c2_recovery_pins: i2c2-recovery-pins {
- groups = "i2c2";
- function = "gpio";
- };
-};
-
-&i2c1 {
- status = "okay";
- pinctrl-names = "default", "recovery";
- pinctrl-0 = <&i2c2_pins>;
- pinctrl-1 = <&i2c2_recovery_pins>;
- /delete-property/mrvl,i2c-fast-mode;
- scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-
- temp-sensor@48 {
- compatible = "ti,tmp75c";
- reg = <0x48>;
- };
-
- temp-sensor@49 {
- compatible = "ti,tmp75c";
- reg = <0x49>;
- };
-};
-
-ð0 {
- status = "okay";
- managed = "in-band-status";
- phys = <&comphy1 0>;
-};
-
-ð1 {
- phy-mode = "sgmii";
- status = "okay";
- managed = "in-band-status";
- phys = <&comphy0 1>;
- sfp = <&sfp_eth1>;
-};
-
-&usb3 {
- status = "okay";
- phys = <&usb2_utmi_otg_phy>;
- phy-names = "usb2-utmi-otg-phy";
-};
-
-&uart0 {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Device Tree file for Globalscale MOCHAbin
- * Copyright (C) 2019 Globalscale technologies, Inc.
- * Copyright (C) 2021 Sartura Ltd.
- *
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-7040.dtsi"
-
-/ {
- model = "Globalscale MOCHAbin";
- compatible = "globalscale,mochabin", "marvell,armada7040",
- "marvell,armada-ap806-quad", "marvell,armada-ap806";
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- aliases {
- ethernet0 = &cp0_eth0;
- ethernet1 = &cp0_eth1;
- ethernet2 = &cp0_eth2;
- ethernet3 = &swport1;
- ethernet4 = &swport2;
- ethernet5 = &swport3;
- ethernet6 = &swport4;
- };
-
- /* SFP+ 10G */
- sfp_eth0: sfp-eth0 {
- compatible = "sff,sfp";
- i2c-bus = <&cp0_i2c1>;
- los-gpio = <&sfp_gpio 3 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&sfp_gpio 2 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&sfp_gpio 1 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&sfp_gpio 0 GPIO_ACTIVE_HIGH>;
- };
-
- /* SFP 1G */
- sfp_eth2: sfp-eth2 {
- compatible = "sff,sfp";
- i2c-bus = <&cp0_i2c0>;
- los-gpio = <&sfp_gpio 7 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&sfp_gpio 6 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&sfp_gpio 5 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&sfp_gpio 4 GPIO_ACTIVE_HIGH>;
- };
-};
-
-/* microUSB UART console */
-&uart0 {
- status = "okay";
-
- pinctrl-0 = <&uart0_pins>;
- pinctrl-names = "default";
-};
-
-/* eMMC */
-&ap_sdhci0 {
- status = "okay";
-
- bus-width = <4>;
- non-removable;
- /delete-property/ marvell,xenon-phy-slow-mode;
- no-1-8-v;
-};
-
-&cp0_pinctrl {
- cp0_uart0_pins: cp0-uart0-pins {
- marvell,pins = "mpp6", "mpp7";
- marvell,function = "uart0";
- };
-
- cp0_spi0_pins: cp0-spi0-pins {
- marvell,pins = "mpp56", "mpp57", "mpp58", "mpp59";
- marvell,function = "spi0";
- };
-
- cp0_spi1_pins: cp0-spi1-pins {
- marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
- marvell,function = "spi1";
- };
-
- cp0_i2c0_pins: cp0-i2c0-pins {
- marvell,pins = "mpp37", "mpp38";
- marvell,function = "i2c0";
- };
-
- cp0_i2c1_pins: cp0-i2c1-pins {
- marvell,pins = "mpp2", "mpp3";
- marvell,function = "i2c1";
- };
-
- pca9554_int_pins: pca9554-int-pins {
- marvell,pins = "mpp27";
- marvell,function = "gpio";
- };
-
- cp0_rgmii1_pins: cp0-rgmii1-pins {
- marvell,pins = "mpp44", "mpp45", "mpp46", "mpp47", "mpp48", "mpp49",
- "mpp50", "mpp51", "mpp52", "mpp53", "mpp54", "mpp55";
- marvell,function = "ge1";
- };
-
- is31_sdb_pins: is31-sdb-pins {
- marvell,pins = "mpp30";
- marvell,function = "gpio";
- };
-
- cp0_pcie_reset_pins: cp0-pcie-reset-pins {
- marvell,pins = "mpp9";
- marvell,function = "gpio";
- };
-
- cp0_switch_pins: cp0-switch-pins {
- marvell,pins = "mpp0", "mpp1";
- marvell,function = "gpio";
- };
-
- cp0_phy_pins: cp0-phy-pins {
- marvell,pins = "mpp12";
- marvell,function = "gpio";
- };
-};
-
-/* mikroBUS UART */
-&cp0_uart0 {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_uart0_pins>;
-};
-
-/* mikroBUS SPI */
-&cp0_spi0 {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_spi0_pins>;
-};
-
-/* SPI-NOR */
-&cp0_spi1{
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_spi1_pins>;
-
- spi-flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <20000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x3e0000>;
- read-only;
- };
-
- partition@3e0000 {
- label = "hw-info";
- reg = <0x3e0000 0x10000>;
- read-only;
- };
-
- partition@3f0000 {
- label = "u-boot-env";
- reg = <0x3f0000 0x10000>;
- };
- };
- };
-};
-
-/* mikroBUS, 1G SFP and GPIO expander */
-&cp0_i2c0 {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_i2c0_pins>;
- clock-frequency = <100000>;
-
- sfp_gpio: pca9554@39 {
- compatible = "nxp,pca9554";
- pinctrl-names = "default";
- pinctrl-0 = <&pca9554_int_pins>;
- reg = <0x39>;
-
- interrupt-parent = <&cp0_gpio1>;
- interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
- interrupt-controller;
- #interrupt-cells = <2>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- /*
- * IO0_0: SFP+_TX_FAULT
- * IO0_1: SFP+_TX_DISABLE
- * IO0_2: SFP+_PRSNT
- * IO0_3: SFP+_LOSS
- * IO0_4: SFP_TX_FAULT
- * IO0_5: SFP_TX_DISABLE
- * IO0_6: SFP_PRSNT
- * IO0_7: SFP_LOSS
- */
- };
-};
-
-/* IS31FL3199, mini-PCIe and 10G SFP+ */
-&cp0_i2c1 {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_i2c1_pins>;
- clock-frequency = <100000>;
-
- leds@64 {
- compatible = "issi,is31fl3199";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&is31_sdb_pins>;
- shutdown-gpios = <&cp0_gpio1 30 GPIO_ACTIVE_HIGH>;
- reg = <0x64>;
-
- led1_red: led@1 {
- label = "red:led1";
- reg = <1>;
- led-max-microamp = <20000>;
- };
-
- led1_green: led@2 {
- label = "green:led1";
- reg = <2>;
- };
-
- led1_blue: led@3 {
- label = "blue:led1";
- reg = <3>;
- };
-
- led2_red: led@4 {
- label = "red:led2";
- reg = <4>;
- };
-
- led2_green: led@5 {
- label = "green:led2";
- reg = <5>;
- };
-
- led2_blue: led@6 {
- label = "blue:led2";
- reg = <6>;
- };
-
- led3_red: led@7 {
- label = "red:led3";
- reg = <7>;
- };
-
- led3_green: led@8 {
- label = "green:led3";
- reg = <8>;
- };
-
- led3_blue: led@9 {
- label = "blue:led3";
- reg = <9>;
- };
- };
-};
-
-&cp0_mdio {
- status = "okay";
-
- /* 88E1512 PHY */
- eth2phy: ethernet-phy@1 {
- reg = <1>;
- sfp = <&sfp_eth2>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_phy_pins>;
- reset-gpios = <&cp0_gpio1 12 GPIO_ACTIVE_LOW>;
- };
-
- /* 88E6141 Topaz switch */
- switch: switch@3 {
- compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_switch_pins>;
- reset-gpios = <&cp0_gpio1 0 GPIO_ACTIVE_LOW>;
-
- interrupt-parent = <&cp0_gpio1>;
- interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- swport1: port@1 {
- reg = <1>;
- label = "lan0";
- phy-handle = <&swphy1>;
- };
-
- swport2: port@2 {
- reg = <2>;
- label = "lan1";
- phy-handle = <&swphy2>;
- };
-
- swport3: port@3 {
- reg = <3>;
- label = "lan2";
- phy-handle = <&swphy3>;
- };
-
- swport4: port@4 {
- reg = <4>;
- label = "lan3";
- phy-handle = <&swphy4>;
- };
-
- port@5 {
- reg = <5>;
- ethernet = <&cp0_eth1>;
- phy-mode = "2500base-x";
- managed = "in-band-status";
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- swphy1: swphy1@17 {
- reg = <17>;
- };
-
- swphy2: swphy2@18 {
- reg = <18>;
- };
-
- swphy3: swphy3@19 {
- reg = <19>;
- };
-
- swphy4: swphy4@20 {
- reg = <20>;
- };
- };
- };
-};
-
-&cp0_ethernet {
- status = "okay";
-};
-
-/* 10G SFP+ */
-&cp0_eth0 {
- status = "okay";
-
- phy-mode = "10gbase-r";
- phys = <&cp0_comphy4 0>;
- managed = "in-band-status";
- sfp = <&sfp_eth0>;
-};
-
-/* Topaz switch uplink */
-&cp0_eth1 {
- status = "okay";
-
- phy-mode = "2500base-x";
- phys = <&cp0_comphy0 1>;
-
- fixed-link {
- speed = <2500>;
- full-duplex;
- };
-};
-
-/* 1G SFP or 1G RJ45 */
-&cp0_eth2 {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_rgmii1_pins>;
-
- phy = <ð2phy>;
- phy-mode = "rgmii-id";
-};
-
-/* SMSC USB5434B hub */
-&cp0_usb3_0 {
- status = "okay";
-
- phys = <&cp0_comphy1 0>;
- phy-names = "cp0-usb3h0-comphy";
-};
-
-/* miniPCI-E USB */
-&cp0_usb3_1 {
- status = "okay";
-};
-
-&cp0_sata0 {
- status = "okay";
-
- /* 7 + 12 SATA connector (J24) */
- sata-port@0 {
- phys = <&cp0_comphy2 0>;
- phy-names = "cp0-sata0-0-phy";
- };
-
- /* M.2-2250 B-key (J39) */
- sata-port@1 {
- phys = <&cp0_comphy3 1>;
- phy-names = "cp0-sata0-1-phy";
- };
-};
-
-/* miniPCI-E (J5) */
-&cp0_pcie2 {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_pcie_reset_pins>;
- phys = <&cp0_comphy5 2>;
- phy-names = "cp0-pcie2-x1-phy";
- reset-gpio = <&cp0_gpio1 9 GPIO_ACTIVE_LOW>;
- ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x8000000>;
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright SolidRun Ltd.
- * Copyright (C) 2024 Tobias Schramm <tobias@t-sys.eu>
- *
- * Device tree for the CN9130-based ClearFog Pro
- */
-
-#include "cn9130.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "SolidRun ClearFog Pro";
- compatible = "solidrun,clearfog-pro", "marvell,armada-ap807-quad",
- "marvell,armada-ap807";
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- aliases {
- gpio1 = &cp0_gpio1;
- gpio2 = &cp0_gpio2;
- i2c0 = &cp0_i2c0;
- ethernet0 = &cp0_eth0;
- ethernet1 = &cp0_eth1;
- ethernet2 = &cp0_eth2;
- spi1 = &cp0_spi1;
- };
-
- memory@00000000 {
- reg = <0x0 0x0 0x1 0x0>;
- device_type = "memory";
- };
-
- /* Virtual regulator, root of power tree */
- vin: regulator-vin {
- compatible = "regulator-fixed";
- regulator-name = "vin";
- regulator-always-on;
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- };
-
- /* Regulators supplied by vin */
- v_5v0: regulator-v_5v0 {
- compatible = "regulator-fixed";
- regulator-name = "v_5v0";
- regulator-always-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vin>;
- };
-
- v_3v3: regulator-v_3v3 {
- compatible = "regulator-fixed";
- regulator-name = "v_3v3";
- regulator-always-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vin>;
- };
-
- /* Regulators supplied by v_5v0 */
- v_1v8: regulator-v_1v8 {
- compatible = "regulator-fixed";
- regulator-name = "v_1v8";
- regulator-always-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&v_5v0>;
- };
-
- v_5v0_usb3_hst_vbus: regulator-v_5v0_usb3_hst_vbus {
- compatible = "regulator-fixed";
- regulator-name = "v_5v0_usb3_hst_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&expander0 6 GPIO_ACTIVE_LOW>;
- vin-supply = <&v_5v0>;
- };
-
- /* Regulators internal to SOM */
- vqmmc: regulator-vqmmc {
- compatible = "regulator-fixed";
- regulator-name = "vqmmc";
- regulator-always-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&v_5v0>;
- };
-
- cp0_usb3_0_phy1: cp0_usb3_phy@1 {
- compatible = "usb-nop-xceiv";
- vbus-supply = <&v_5v0_usb3_hst_vbus>;
- };
-
- cp0_sfp_eth0: sfp-eth@0 {
- compatible = "sff,sfp";
- i2c-bus = <&cp0_i2c1>;
- los-gpio = <&expander0 12 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&expander0 15 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&expander0 14 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&expander0 13 GPIO_ACTIVE_HIGH>;
- maximum-power-milliwatt = <2000>;
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_button_pin>;
-
- reset {
- label = "Reset";
- linux,code = <KEY_RESTART>;
- gpios = <&cp0_gpio2 0 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&uart0 {
- status = "okay";
-};
-
-/* on-board eMMC */
-&ap_sdhci0 {
- bus-width = <8>;
- pinctrl-names = "default";
- vqmmc-supply = <&vqmmc>;
- status = "okay";
-};
-
-&cp0_crypto {
- status = "okay";
-};
-
-&cp0_ethernet {
- status = "okay";
-};
-
-&cp0_gpio1 {
- status = "okay";
-};
-
-&cp0_gpio2 {
- status = "okay";
-};
-
-&cp0_i2c0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_i2c0_pins>;
- clock-frequency = <100000>;
-
- /*
- * PCA9655 GPIO expander, up to 1MHz clock.
- * 0-CON3 CLKREQ#
- * 1-CON3 PERST#
- * 2-CON2 PERST#
- * 3-CON3 W_DISABLE
- * 4-CON2 CLKREQ#
- * 5-USB3 overcurrent
- * 6-USB3 power
- * 7-CON2 W_DISABLE
- * 8-JP4 P1
- * 9-JP4 P4
- * 10-JP4 P5
- * 11-m.2 DEVSLP
- * 12-SFP_LOS
- * 13-SFP_TX_FAULT
- * 14-SFP_TX_DISABLE
- * 15-SFP_MOD_DEF0
- */
- expander0: gpio-expander@20 {
- compatible = "nxp,pca9555";
- reg = <0x20>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&cp0_gpio1>;
- interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_expander0_pins>;
- vcc-supply = <&v_3v3>;
-
- pcie1_0_clkreq {
- gpio-hog;
- gpios = <0 GPIO_ACTIVE_LOW>;
- input;
- line-name = "pcie1.0-clkreq";
- };
-
- pcie1_0_w_disable {
- gpio-hog;
- gpios = <3 GPIO_ACTIVE_LOW>;
- output-low;
- line-name = "pcie1.0-w-disable";
- };
-
- pcie2_0_clkreq {
- gpio-hog;
- gpios = <4 GPIO_ACTIVE_LOW>;
- input;
- line-name = "pcie2.0-clkreq";
- };
-
- pcie2_0_w_disable {
- gpio-hog;
- gpios = <7 GPIO_ACTIVE_LOW>;
- output-low;
- line-name = "pcie2.0-w-disable";
- };
-
- usb3_ilimit {
- gpio-hog;
- gpios = <5 GPIO_ACTIVE_LOW>;
- input;
- line-name = "usb3-current-limit";
- };
-
- m2_devslp {
- gpio-hog;
- gpios = <11 GPIO_ACTIVE_HIGH>;
- output-low;
- line-name = "m.2 devslp";
- };
- };
-
- /* ADC only for mikroBUS connector */
- mcp3021@4c {
- compatible = "microchip,mcp3021";
- reg = <0x4c>;
- };
-
- /* EEPROM on the SOM */
- eeprom@53 {
- compatible = "atmel,24c02";
- reg = <0x53>;
- pagesize = <16>;
- read-only;
-
- nvmem-layout {
- compatible = "onie,tlv-layout";
-
- onie_tlv_macaddr: mac-address {
- #nvmem-cell-cells = <1>;
- };
- };
- };
-};
-
-/* SMBUS on mini PCIe sockets */
-&cp0_i2c1 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_i2c1_pins>;
- clock-frequency = <100000>;
-};
-
-&cp0_mdio {
- status = "okay";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- /* Green led blinks on activity, orange LED on link */
- marvell,reg-init = <3 16 0 0x0064>;
- };
-
- switch@4 {
- compatible = "marvell,mv88e6085";
- reg = <4>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&cp0_gpio1>;
- interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_dsa0_pins>;
- reset-gpios = <&cp0_gpio1 27 GPIO_ACTIVE_LOW>;
-
- mdio-external {
- compatible = "marvell,mv88e6xxx-mdio-external";
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* 88E1512 PHY */
- port6_phy: ethernet-phy@1 {
- reg = <1>;
- };
- };
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- label = "lan5";
- };
-
- port@1 {
- reg = <1>;
- label = "lan4";
- };
-
- port@2 {
- reg = <2>;
- label = "lan3";
- };
-
- port@3 {
- reg = <3>;
- label = "lan2";
- };
-
- port@4 {
- reg = <4>;
- label = "lan1";
- };
-
- port@5 {
- reg = <5>;
- ethernet = <&cp0_eth1>;
- label = "cpu";
- phy-mode = "rgmii-id";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
-
- port@6 {
- /* 88E1512 external phy */
- reg = <6>;
- label = "lan6";
- phy-handle = <&port6_phy>;
- phy-mode = "rgmii-id";
- };
- };
- };
-};
-
-/* SRDS #0 - SATA on bottom M.2 B-Key connector */
-&cp0_sata0 {
- status = "okay";
-
- sata-port@0 {
- status = "disabled";
- };
-
- sata-port@1 {
- phys = <&cp0_comphy0 1>;
- target-supply = <&v_3v3>;
- };
-};
-
-&cp0_utmi {
- status = "okay";
-};
-
-/* mini PCIe slot far from SOM, USB 2.0 only, SS lanes unused */
-&cp0_usb3_0 {
- status = "okay";
- phys = <&cp0_utmi0>;
- phy-names = "utmi";
- dr_mode = "host";
-};
-
-/* SRDS #1 - USB-A 3.0 host port */
-&cp0_usb3_1 {
- status = "okay";
- phys = <&cp0_utmi1>, <&cp0_comphy1 0>;
- phy-names = "utmi", "usb";
- usb-phy = <&cp0_usb3_0_phy1>;
- dr_mode = "host";
-};
-
-/* SRDS #2 - SFP+ 10GE */
-&cp0_eth0 {
- status = "okay";
- phy-mode = "10gbase-r";
- phys = <&cp0_comphy2 0>;
- managed = "in-band-status";
- nvmem-cells = <&onie_tlv_macaddr 0>;
- nvmem-cell-names = "mac-address";
- sfp = <&cp0_sfp_eth0>;
-};
-
-/* SRDS #3 - SGMII 1GE to L2 switch */
-&cp0_eth1 {
- status = "okay";
- phys = <&cp0_comphy3 1>;
- phy-mode = "sgmii";
- nvmem-cells = <&onie_tlv_macaddr 1>;
- nvmem-cell-names = "mac-address";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-/* SRDS #4 - mini PCIe slot near SOM */
-&cp0_pcie1 {
- status = "okay";
- phys = <&cp0_comphy4 1>;
- num-lanes = <1>;
- reset-gpios = <&expander0 2 GPIO_ACTIVE_LOW>;
-};
-
-/* SRDS #5 - mini PCIe slot far from SOM */
-&cp0_pcie2 {
- status = "okay";
- phys = <&cp0_comphy5 2>;
- num-lanes = <1>;
- reset-gpios = <&expander0 1 GPIO_ACTIVE_LOW>;
-};
-
-/* GE PHY RGMII */
-&cp0_eth2 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_ge2_rgmii_pins>;
- phy = <&phy0>;
- phy-mode = "rgmii-id";
- nvmem-cells = <&onie_tlv_macaddr 2>;
- nvmem-cell-names = "mac-address";
-};
-
-/* micro SD card slot */
-&cp0_sdhci0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_sdhci_pins &cp0_sdhci_cd_pins>;
- bus-width = <4>;
- cd-gpios = <&cp0_gpio2 11 GPIO_ACTIVE_LOW>;
- no-1-8-v;
- vqmmc-supply = <&v_3v3>;
- vmmc-supply = <&v_3v3>;
-};
-
-&cp0_spi1 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_spi1_pins>;
-
- spi-flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0x0>;
- #address-cells = <0x1>;
- #size-cells = <0x1>;
- spi-max-frequency = <10000000>;
- };
-};
-
-&cp0_syscon0 {
- cp0_pinctrl: pinctrl {
- compatible = "marvell,cp115-standalone-pinctrl";
-
- cp0_i2c0_pins: cp0-i2c0-pins {
- marvell,pins = "mpp37", "mpp38";
- marvell,function = "i2c0";
- };
-
- cp0_i2c1_pins: cp0-i2c1-pins {
- marvell,pins = "mpp35", "mpp36";
- marvell,function = "i2c1";
- };
-
- cp0_ge2_rgmii_pins: cp0-ge2-rgmii-pins {
- marvell,pins = "mpp44", "mpp45", "mpp46",
- "mpp47", "mpp48", "mpp49",
- "mpp50", "mpp51", "mpp52",
- "mpp53", "mpp54", "mpp55";
- marvell,function = "ge1";
- };
-
- cp0_sdhci_cd_pins: cp0-sdhci-cd-pins {
- marvell,pins = "mpp43";
- marvell,function = "sdio";
- };
-
- cp0_sdhci_pins: cp0-sdhci-pins {
- marvell,pins = "mpp56", "mpp57", "mpp58",
- "mpp59", "mpp60", "mpp61";
- marvell,function = "sdio";
- };
-
- cp0_spi1_pins: cp0-spi1-pins {
- marvell,pins = "mpp12", "mpp13", "mpp14",
- "mpp15", "mpp16";
- marvell,function = "spi1";
- };
-
- cp0_dsa0_pins: cp0-dsa0-pins {
- marvell,pins = "mpp27", "mpp29";
- marvell,function = "gpio";
- };
-
- cp0_button_pin: cp0-button-pin {
- marvell,pins = "mpp32";
- marvell,function = "gpio";
- };
-
- cp0_expander0_pins: cp0-expander0-pins {
- marvell,pins = "mpp4";
- marvell,function = "gpio";
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-/*
- * Copyright (C) 2019 Marvell International Ltd.
- *
- * Device tree for the CN9131-DB board.
- */
-
-#include "cn9130.dtsi"
-#include "puzzle-thermal.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
- model = "iEi Puzzle-M901";
- compatible = "iei,puzzle-m901",
- "marvell,armada-ap807-quad", "marvell,armada-ap807";
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- aliases {
- i2c0 = &cp1_i2c0;
- i2c1 = &cp0_i2c0;
- ethernet0 = &cp0_eth0;
- ethernet1 = &cp0_eth1;
- ethernet2 = &cp0_eth2;
- ethernet3 = &cp1_eth0;
- ethernet4 = &cp1_eth1;
- ethernet5 = &cp1_eth2;
- gpio1 = &cp0_gpio1;
- gpio2 = &cp0_gpio2;
- gpio3 = &cp1_gpio1;
- gpio4 = &cp1_gpio2;
- led-boot = &led_power;
- led-failsafe = &led_info;
- led-running = &led_power;
- led-upgrade = &led_info;
- };
-
- memory@00000000 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x80000000>;
- };
-
- gpio_keys {
- compatible = "gpio-keys";
-
- reset {
- label = "Reset";
- linux,code = <KEY_RESTART>;
- gpios = <&cp0_gpio2 4 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&uart0 {
- status = "okay";
-};
-
-&cp0_uart0 {
- status = "okay";
-
- puzzle-mcu {
- compatible = "iei,wt61p803-puzzle";
- #address-cells = <1>;
- #size-cells = <1>;
- current-speed = <115200>;
- enable-beep;
- status = "okay";
-
- leds {
- compatible = "iei,wt61p803-puzzle-leds";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-
- led@0 {
- reg = <0>;
- label = "white:network";
- active-low;
- };
-
- led@1 {
- reg = <1>;
- label = "green:cloud";
- active-low;
- };
-
- led_info: led@2 {
- reg = <2>;
- label = "orange:info";
- active-low;
- };
-
- led_power: led@3 {
- reg = <3>;
- function = LED_FUNCTION_POWER;
- color = <LED_COLOR_ID_YELLOW>;
- active-low;
- default-state = "on";
- };
- };
-
- hwmon {
- compatible = "iei,wt61p803-puzzle-hwmon";
- #address-cells = <1>;
- #size-cells = <0>;
-
- chassis_fan_group0: fan-group@0 {
- #cooling-cells = <2>;
- reg = <0x00>;
- cooling-levels = <0 159 195 211 223 241 255>;
- };
- };
- };
-};
-
-&ap_thermal_ic {
- PUZZLE_FAN_THERMAL(ic, &chassis_fan_group0);
-};
-
-&cp0_thermal_ic {
- PUZZLE_FAN_THERMAL(cp0, &chassis_fan_group0);
-};
-
-/* on-board eMMC - U9 */
-&ap_sdhci0 {
- pinctrl-names = "default";
- bus-width = <8>;
- status = "okay";
- mmc-ddr-1_8v;
- mmc-hs400-1_8v;
-};
-
-&cp0_crypto {
- status = "okay";
-};
-
-&cp0_xmdio {
- status = "okay";
- cp0_nbaset_phy0: ethernet-phy@0 {
- compatible = "ethernet-phy-ieee802.3-c45";
- reg = <2>;
- };
- cp0_nbaset_phy1: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c45";
- reg = <0>;
- };
- cp0_nbaset_phy2: ethernet-phy@2 {
- compatible = "ethernet-phy-ieee802.3-c45";
- reg = <8>;
- };
-};
-
-&cp0_ethernet {
- status = "okay";
-};
-
-/* SLM-1521-V2, CON9 */
-&cp0_eth0 {
- status = "okay";
- phy-mode = "2500base-x";
- phys = <&cp0_comphy2 0>;
- phy = <&cp0_nbaset_phy0>;
-};
-
-&cp0_eth1 {
- status = "okay";
- phy-mode = "2500base-x";
- phys = <&cp0_comphy4 1>;
- phy = <&cp0_nbaset_phy1>;
-};
-
-&cp0_eth2 {
- status = "okay";
- phy-mode = "2500base-x";
- phys = <&cp0_comphy5 2>;
- phy = <&cp0_nbaset_phy2>;
-};
-
-&cp0_gpio1 {
- status = "okay";
-};
-
-&cp0_gpio2 {
- status = "okay";
-};
-
-&cp0_i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_i2c0_pins>;
- status = "okay";
- clock-frequency = <100000>;
- rtc@32 {
- compatible = "epson,rx8130";
- reg = <0x32>;
- wakeup-source;
- };
-};
-
-/* SLM-1521-V2, CON6 */
-&cp0_pcie0 {
- status = "okay";
- num-lanes = <2>;
- num-viewport = <8>;
- phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>;
-};
-
-/* U55 */
-&cp0_spi1 {
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_spi0_pins>;
- reg = <0x700680 0x50>, /* control */
- <0x2000000 0x1000000>; /* CS0 */
- status = "okay";
- spi-flash@0 {
- #address-cells = <0x1>;
- #size-cells = <0x1>;
- compatible = "jedec,spi-nor";
- reg = <0x0>;
- spi-max-frequency = <40000000>;
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
- partition@0 {
- label = "U-Boot";
- reg = <0x0 0x1f0000>;
- };
- partition@1f0000 {
- label = "U-Boot ENV Factory";
- reg = <0x1f0000 0x10000>;
- };
- partition@200000 {
- label = "Reserved";
- reg = <0x200000 0x1f0000>;
- };
- partition@3f0000 {
- label = "U-Boot ENV";
- reg = <0x3f0000 0x10000>;
- };
- };
- };
-};
-
-&cp0_rtc {
- status = "disabled";
-};
-
-&cp0_syscon0 {
- cp0_pinctrl: pinctrl {
- compatible = "marvell,cp115-standalone-pinctrl";
- cp0_i2c0_pins: cp0-i2c-pins-0 {
- marvell,pins = "mpp37", "mpp38";
- marvell,function = "i2c0";
- };
- cp0_i2c1_pins: cp0-i2c-pins-1 {
- marvell,pins = "mpp35", "mpp36";
- marvell,function = "i2c1";
- };
- cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 {
- marvell,pins = "mpp0", "mpp1", "mpp2",
- "mpp3", "mpp4", "mpp5",
- "mpp6", "mpp7", "mpp8",
- "mpp9", "mpp10", "mpp11";
- marvell,function = "ge0";
- };
- cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 {
- marvell,pins = "mpp44", "mpp45", "mpp46",
- "mpp47", "mpp48", "mpp49",
- "mpp50", "mpp51", "mpp52",
- "mpp53", "mpp54", "mpp55";
- marvell,function = "ge1";
- };
- cp0_spi0_pins: cp0-spi-pins-0 {
- marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
- marvell,function = "spi1";
- };
- };
-};
-
-/*
- * Instantiate the first connected CP115
- */
-
-#define CP11X_NAME cp1
-#define CP11X_BASE f6000000
-#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000))
-#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
-#define CP11X_PCIE0_BASE f6600000
-#define CP11X_PCIE1_BASE f6620000
-#define CP11X_PCIE2_BASE f6640000
-
-#include "armada-cp115.dtsi"
-
-#undef CP11X_NAME
-#undef CP11X_BASE
-#undef CP11X_PCIEx_MEM_BASE
-#undef CP11X_PCIEx_MEM_SIZE
-#undef CP11X_PCIE0_BASE
-#undef CP11X_PCIE1_BASE
-#undef CP11X_PCIE2_BASE
-
-&cp1_crypto {
- status = "okay";
-};
-
-&cp1_xmdio {
- status = "okay";
- cp1_nbaset_phy0: ethernet-phy@3 {
- compatible = "ethernet-phy-ieee802.3-c45";
- reg = <2>;
- };
- cp1_nbaset_phy1: ethernet-phy@4 {
- compatible = "ethernet-phy-ieee802.3-c45";
- reg = <0>;
- };
- cp1_nbaset_phy2: ethernet-phy@5 {
- compatible = "ethernet-phy-ieee802.3-c45";
- reg = <8>;
- };
-};
-
-&cp1_ethernet {
- status = "okay";
-};
-
-/* CON50 */
-&cp1_eth0 {
- status = "okay";
- phy-mode = "2500base-x";
- phys = <&cp1_comphy2 0>;
- phy = <&cp1_nbaset_phy0>;
-};
-
-&cp1_eth1 {
- status = "okay";
- phy-mode = "2500base-x";
- phys = <&cp1_comphy4 1>;
- phy = <&cp1_nbaset_phy1>;
-};
-
-&cp1_eth2 {
- status = "okay";
- phy-mode = "2500base-x";
- phys = <&cp1_comphy5 2>;
- phy = <&cp1_nbaset_phy2>;
-};
-
-&cp1_sata0 {
- status = "okay";
- sata-port@1 {
- status = "okay";
- phys = <&cp1_comphy0 1>;
- };
-};
-
-&cp1_gpio1 {
- status = "okay";
-};
-
-&cp1_gpio2 {
- status = "okay";
-};
-
-&cp1_i2c0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&cp1_i2c0_pins>;
- clock-frequency = <100000>;
-};
-
-&cp1_rtc {
- status = "disabled";
-};
-
-&cp1_syscon0 {
- cp1_pinctrl: pinctrl {
- compatible = "marvell,cp115-standalone-pinctrl";
- cp1_i2c0_pins: cp1-i2c-pins-0 {
- marvell,pins = "mpp37", "mpp38";
- marvell,function = "i2c0";
- };
- cp1_spi0_pins: cp1-spi-pins-0 {
- marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
- marvell,function = "spi1";
- };
- cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins {
- marvell,pins = "mpp3";
- marvell,function = "gpio";
- };
- cp1_sfp_pins: sfp-pins {
- marvell,pins = "mpp8", "mpp9", "mpp10", "mpp11";
- marvell,function = "gpio";
- };
- };
-};
-
-&cp1_thermal_ic {
- PUZZLE_FAN_THERMAL(cp1, &chassis_fan_group0);
-};
-
-&cp1_usb3_1 {
- status = "okay";
- phys = <&cp1_comphy3 1>;
- phy-names = "usb";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-/*
- * Copyright (C) 2019 Marvell International Ltd.
- *
- * Device tree for the CN9132-DB board.
- */
-
-#include "cn9130.dtsi"
-#include "puzzle-thermal.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
- model = "iEi Puzzle-M902";
- compatible = "iei,puzzle-m902",
- "marvell,armada-ap807-quad", "marvell,armada-ap807";
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- aliases {
- i2c0 = &cp1_i2c0;
- i2c1 = &cp0_i2c0;
- gpio1 = &cp0_gpio1;
- gpio2 = &cp0_gpio2;
- gpio3 = &cp1_gpio1;
- gpio4 = &cp1_gpio2;
- gpio5 = &cp2_gpio1;
- gpio6 = &cp2_gpio2;
- ethernet0 = &cp0_eth0;
- ethernet1 = &cp0_eth1;
- ethernet2 = &cp0_eth2;
- ethernet3 = &cp1_eth0;
- ethernet4 = &cp1_eth1;
- ethernet5 = &cp1_eth2;
- ethernet6 = &cp2_eth0;
- ethernet7 = &cp2_eth1;
- ethernet8 = &cp2_eth2;
- spi1 = &cp0_spi0;
- spi2 = &cp0_spi1;
- led-boot = &led_power;
- led-failsafe = &led_info;
- led-running = &led_power;
- led-upgrade = &led_info;
- };
-
- memory@00000000 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x80000000>;
- };
-
- gpio_keys {
- compatible = "gpio-keys";
-
- reset {
- label = "Reset";
- linux,code = <KEY_RESTART>;
- gpios = <&cp0_gpio2 4 GPIO_ACTIVE_LOW>;
- };
- };
-
- cp2_reg_usb3_vbus0: cp2_usb3_vbus@0 {
- compatible = "regulator-fixed";
- regulator-name = "cp2-xhci0-vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- gpio = <&cp2_gpio1 2 GPIO_ACTIVE_HIGH>;
- };
-
- cp2_usb3_0_phy0: cp2_usb3_phy0 {
- compatible = "usb-nop-xceiv";
- vcc-supply = <&cp2_reg_usb3_vbus0>;
- };
-
- cp2_reg_usb3_vbus1: cp2_usb3_vbus@1 {
- compatible = "regulator-fixed";
- regulator-name = "cp2-xhci1-vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- gpio = <&cp2_gpio1 3 GPIO_ACTIVE_HIGH>;
- };
-
- cp2_usb3_0_phy1: cp2_usb3_phy1 {
- compatible = "usb-nop-xceiv";
- vcc-supply = <&cp2_reg_usb3_vbus1>;
- };
-
- cp2_sfp_eth0: sfp-eth0 {
- compatible = "sff,sfp";
- i2c-bus = <&cp2_sfpp0_i2c>;
- los-gpio = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&cp2_module_expander1 10 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&cp2_module_expander1 9 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&cp2_module_expander1 8 GPIO_ACTIVE_HIGH>;
- status = "disabled";
- };
-};
-
-&uart0 {
- status = "okay";
-};
-
-&cp0_uart0 {
- status = "okay";
-
- puzzle-mcu {
- compatible = "iei,wt61p803-puzzle";
- #address-cells = <1>;
- #size-cells = <1>;
- current-speed = <115200>;
- enable-beep;
- status = "okay";
-
- leds {
- compatible = "iei,wt61p803-puzzle-leds";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-
- led@0 {
- reg = <0>;
- label = "white:network";
- active-low;
- };
-
- led@1 {
- reg = <1>;
- label = "green:cloud";
- active-low;
- };
-
- led_info: led@2 {
- reg = <2>;
- label = "orange:info";
- active-low;
- };
-
- led_power: led@3 {
- reg = <3>;
- function = LED_FUNCTION_POWER;
- color = <LED_COLOR_ID_YELLOW>;
- active-low;
- default-state = "on";
- };
- };
-
- hwmon {
- compatible = "iei,wt61p803-puzzle-hwmon";
- #address-cells = <1>;
- #size-cells = <0>;
-
- chassis_fan_group0: fan-group@0 {
- #cooling-cells = <2>;
- reg = <0x00>;
- cooling-levels = <0 159 195 211 223 241 255>;
- };
- };
- };
-};
-
-&ap_thermal_ic {
- PUZZLE_FAN_THERMAL(ic, &chassis_fan_group0);
-};
-
-&cp0_thermal_ic {
- PUZZLE_FAN_THERMAL(cp0, &chassis_fan_group0);
-};
-
-
-/* on-board eMMC - U9 */
-&ap_sdhci0 {
- pinctrl-names = "default";
- bus-width = <8>;
- status = "okay";
- mmc-ddr-1_8v;
- mmc-hs400-1_8v;
-};
-
-&cp0_crypto {
- status = "okay";
-};
-
-&cp0_xmdio {
- status = "okay";
- cp0_nbaset_phy0: ethernet-phy@0 {
- compatible = "ethernet-phy-ieee802.3-c45";
- reg = <2>;
- };
- cp0_nbaset_phy1: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c45";
- reg = <0>;
- };
- cp0_nbaset_phy2: ethernet-phy@2 {
- compatible = "ethernet-phy-ieee802.3-c45";
- reg = <8>;
- };
-};
-
-&cp0_ethernet {
- status = "okay";
-};
-
-/* SLM-1521-V2, CON9 */
-&cp0_eth0 {
- status = "okay";
- phy-mode = "10gbase-kr";
- phys = <&cp0_comphy2 0>;
- phy = <&cp0_nbaset_phy0>;
-};
-
-&cp0_eth1 {
- status = "okay";
- phy-mode = "2500base-x";
- phys = <&cp0_comphy4 1>;
- phy = <&cp0_nbaset_phy1>;
-};
-
-&cp0_eth2 {
- status = "okay";
- phy-mode = "2500base-x";
- phys = <&cp0_comphy1 2>;
- phy = <&cp0_nbaset_phy2>;
-};
-
-&cp0_gpio1 {
- status = "okay";
-};
-
-&cp0_gpio2 {
- status = "okay";
-};
-
-&cp0_i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_i2c0_pins>;
- status = "okay";
- clock-frequency = <100000>;
- rtc@32 {
- compatible = "epson,rx8130";
- reg = <0x32>;
- wakeup-source;
- };
-};
-
-&cp0_i2c1 {
- clock-frequency = <100000>;
-};
-
-/* SLM-1521-V2, CON6 */
-&cp0_sata0 {
- status = "okay";
- sata-port@1 {
- status = "okay";
- phys = <&cp0_comphy0 1>;
- };
-};
-
-&cp0_pcie2 {
- status = "okay";
- num-lanes = <1>;
- num-viewport = <8>;
- phys = <&cp0_comphy5 2>;
-};
-
-/* U55 */
-&cp0_spi1 {
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_spi0_pins>;
- reg = <0x700680 0x50>, /* control */
- <0x2000000 0x1000000>; /* CS0 */
- status = "okay";
- spi-flash@0 {
- #address-cells = <0x1>;
- #size-cells = <0x1>;
- compatible = "jedec,spi-nor";
- reg = <0x0>;
- spi-max-frequency = <40000000>;
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
- partition@0 {
- label = "U-Boot";
- reg = <0x0 0x1f0000>;
- };
- partition@1f0000 {
- label = "U-Boot ENV Factory";
- reg = <0x1f0000 0x10000>;
- };
- partition@200000 {
- label = "Reserved";
- reg = <0x200000 0x1f0000>;
- };
- partition@3f0000 {
- label = "U-Boot ENV";
- reg = <0x3f0000 0x10000>;
- };
- };
- };
-};
-
-&cp0_rtc {
- status = "disabled";
-};
-
-&cp0_syscon0 {
- cp0_pinctrl: pinctrl {
- compatible = "marvell,cp115-standalone-pinctrl";
- cp0_i2c0_pins: cp0-i2c-pins-0 {
- marvell,pins = "mpp37", "mpp38";
- marvell,function = "i2c0";
- };
- cp0_i2c1_pins: cp0-i2c-pins-1 {
- marvell,pins = "mpp35", "mpp36";
- marvell,function = "i2c1";
- };
- cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 {
- marvell,pins = "mpp0", "mpp1", "mpp2",
- "mpp3", "mpp4", "mpp5",
- "mpp6", "mpp7", "mpp8",
- "mpp9", "mpp10", "mpp11";
- marvell,function = "ge0";
- };
- cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 {
- marvell,pins = "mpp44", "mpp45", "mpp46",
- "mpp47", "mpp48", "mpp49",
- "mpp50", "mpp51", "mpp52",
- "mpp53", "mpp54", "mpp55";
- marvell,function = "ge1";
- };
- cp0_spi0_pins: cp0-spi-pins-0 {
- marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
- marvell,function = "spi1";
- };
- };
-};
-
-&cp0_usb3_1 {
- status = "okay";
- phys = <&cp0_comphy3 1>;
- phy-names = "usb";
-};
-
-/*
- * Instantiate the first connected CP115
- */
-
-#define CP11X_NAME cp1
-#define CP11X_BASE f4000000
-#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000))
-#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
-#define CP11X_PCIE0_BASE f4600000
-#define CP11X_PCIE1_BASE f4620000
-#define CP11X_PCIE2_BASE f4640000
-
-#include "armada-cp115.dtsi"
-
-#undef CP11X_NAME
-#undef CP11X_BASE
-#undef CP11X_PCIEx_MEM_BASE
-#undef CP11X_PCIEx_MEM_SIZE
-#undef CP11X_PCIE0_BASE
-#undef CP11X_PCIE1_BASE
-#undef CP11X_PCIE2_BASE
-
-&cp1_crypto {
- status = "okay";
-};
-
-&cp1_xmdio {
- status = "okay";
- cp1_nbaset_phy0: ethernet-phy@3 {
- compatible = "ethernet-phy-ieee802.3-c45";
- reg = <2>;
- };
- cp1_nbaset_phy1: ethernet-phy@4 {
- compatible = "ethernet-phy-ieee802.3-c45";
- reg = <0>;
- };
- cp1_nbaset_phy2: ethernet-phy@5 {
- compatible = "ethernet-phy-ieee802.3-c45";
- reg = <8>;
- };
-};
-
-&cp1_ethernet {
- status = "okay";
-};
-
-/* CON50 */
-&cp1_eth0 {
- status = "okay";
- phy-mode = "10gbase-kr";
- phys = <&cp1_comphy2 0>;
- phy = <&cp1_nbaset_phy0>;
-};
-
-&cp1_eth1 {
- status = "okay";
- phy-mode = "2500base-x";
- phys = <&cp1_comphy4 1>;
- phy = <&cp1_nbaset_phy1>;
-};
-
-&cp1_eth2 {
- status = "okay";
- phy-mode = "2500base-x";
- phys = <&cp1_comphy1 2>;
- phy = <&cp1_nbaset_phy2>;
-};
-
-&cp1_gpio1 {
- status = "okay";
-};
-
-&cp1_gpio2 {
- status = "okay";
-};
-
-&cp1_i2c0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&cp1_i2c0_pins>;
- clock-frequency = <100000>;
-};
-
-&cp1_rtc {
- status = "disabled";
-};
-
-&cp1_syscon0 {
- cp1_pinctrl: pinctrl {
- compatible = "marvell,cp115-standalone-pinctrl";
- cp1_i2c0_pins: cp1-i2c-pins-0 {
- marvell,pins = "mpp37", "mpp38";
- marvell,function = "i2c0";
- };
- cp1_spi0_pins: cp1-spi-pins-0 {
- marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
- marvell,function = "spi1";
- };
- cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins {
- marvell,pins = "mpp3";
- marvell,function = "gpio";
- };
- };
-};
-
-&cp1_thermal_ic {
- PUZZLE_FAN_THERMAL(cp1, &chassis_fan_group0);
-};
-
-/*
- * Instantiate the second connected CP115
- */
-
-#define CP11X_NAME cp2
-#define CP11X_BASE f6000000
-#define CP11X_PCIEx_MEM_BASE(iface) (0xe5000000 + (iface * 0x1000000))
-#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
-#define CP11X_PCIE0_BASE f6600000
-#define CP11X_PCIE1_BASE f6620000
-#define CP11X_PCIE2_BASE f6640000
-
-#include "armada-cp115.dtsi"
-
-#undef CP11X_NAME
-#undef CP11X_BASE
-#undef CP11X_PCIEx_MEM_BASE
-#undef CP11X_PCIEx_MEM_SIZE
-#undef CP11X_PCIE0_BASE
-#undef CP11X_PCIE1_BASE
-#undef CP11X_PCIE2_BASE
-
-&cp2_crypto {
- status = "okay";
-};
-
-&cp2_ethernet {
- status = "okay";
-};
-
-&cp2_xmdio {
- status = "okay";
- cp2_nbaset_phy0: ethernet-phy@6 {
- compatible = "ethernet-phy-ieee802.3-c45";
- reg = <2>;
- };
- cp2_nbaset_phy1: ethernet-phy@7 {
- compatible = "ethernet-phy-ieee802.3-c45";
- reg = <0>;
- };
- cp2_nbaset_phy2: ethernet-phy@8 {
- compatible = "ethernet-phy-ieee802.3-c45";
- reg = <8>;
- };
-};
-
-/* SLM-1521-V2, CON9 */
-&cp2_eth0 {
- status = "okay";
- phy-mode = "10gbase-kr";
- phys = <&cp2_comphy2 0>;
- phy = <&cp2_nbaset_phy0>;
-};
-
-&cp2_eth1 {
- status = "okay";
- phy-mode = "2500base-x";
- phys = <&cp2_comphy4 1>;
- phy = <&cp2_nbaset_phy1>;
-};
-
-&cp2_eth2 {
- status = "okay";
- phy-mode = "2500base-x";
- phys = <&cp2_comphy1 2>;
- phy = <&cp2_nbaset_phy2>;
-};
-
-&cp2_gpio1 {
- status = "okay";
-};
-
-&cp2_gpio2 {
- status = "okay";
-};
-
-&cp2_i2c0 {
- clock-frequency = <100000>;
- /* SLM-1521-V2 - U3 */
- i2c-mux@72 {
- compatible = "nxp,pca9544";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x72>;
- cp2_sfpp0_i2c: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- /* U12 */
- cp2_module_expander1: pca9555@21 {
- compatible = "nxp,pca9555";
- pinctrl-names = "default";
- gpio-controller;
- #gpio-cells = <2>;
- reg = <0x21>;
- };
- };
- };
-};
-
-&cp2_rtc {
- status = "disabled";
-};
-
-&cp2_syscon0 {
- cp2_pinctrl: pinctrl {
- compatible = "marvell,cp115-standalone-pinctrl";
- cp2_i2c0_pins: cp2-i2c-pins-0 {
- marvell,pins = "mpp37", "mpp38";
- marvell,function = "i2c0";
- };
- };
-};
-
-&cp2_thermal_ic {
- PUZZLE_FAN_THERMAL(cp2, &chassis_fan_group0);
-};
+++ /dev/null
-#define PUZZLE_FAN_THERMAL(_cname, _fan) \
- polling-delay-passive = <500>; \
- polling-delay = <1000>; \
- \
- trips { \
- cpu-hot { \
- temperature = <75000>; \
- hysteresis = <5000>; \
- type = "hot"; \
- }; \
- _cname##_active_full: cpu-active-full { \
- temperature = <70000>; \
- hysteresis = <5000>; \
- type = "active"; \
- }; \
- _cname##_active_high: cpu-active-high { \
- temperature = <65000>; \
- hysteresis = <5000>; \
- type = "active"; \
- }; \
- _cname##_active_med: cpu-active-med { \
- temperature = <62500>; \
- hysteresis = <3000>; \
- type = "active"; \
- }; \
- _cname##_active_low: cpu-active-low { \
- temperature = <60000>; \
- hysteresis = <3000>; \
- type = "active"; \
- }; \
- _cname##_active_min: cpu-active-min { \
- temperature = <55000>; \
- hysteresis = <5000>; \
- type = "active"; \
- }; \
- _cname##_active_idle: cpu-active-idle { \
- temperature = <50000>; \
- hysteresis = <5000>; \
- type = "active"; \
- }; \
- }; \
- cooling-maps { \
- cpu-active-full { \
- trip = <&_cname##_active_full>; \
- cooling-device = <_fan THERMAL_NO_LIMIT \
- THERMAL_NO_LIMIT>; \
- }; \
- cpu-active-high { \
- trip = <&_cname##_active_high>; \
- cooling-device = <_fan 4 5>; \
- }; \
- cpu-active-med { \
- trip = <&_cname##_active_med>; \
- cooling-device = <_fan 3 4>; \
- }; \
- cpu-active-low { \
- trip = <&_cname##_active_low>; \
- cooling-device = <_fan 2 3>; \
- }; \
- cpu-active-min { \
- trip = <&_cname##_active_min>; \
- cooling-device = <_fan 1 2>; \
- }; \
- cpu-active-idle { \
- trip = <&_cname##_active_idle>; \
- cooling-device = <_fan 0 0>; \
- }; \
- }
projects / openwrt / staging / blocktrron.git / commitdiff