drivers/rtc: add support for Qualcomm PMIC8xxx RTC
authorAnirudh Ghayal <aghayal@codeaurora.org>
Tue, 26 Jul 2011 00:13:33 +0000 (17:13 -0700)
committerLinus Torvalds <torvalds@linux-foundation.org>
Tue, 26 Jul 2011 03:57:17 +0000 (20:57 -0700)
Add support for PMIC8xxx based RTC.  PMIC8xxx is Qualcomm's power
management IC that internally houses an RTC module.  This driver
communicates with the PMIC module over SSBI bus.

[akpm@linux-foundation.org: cosmetic tweaks]
Acked-by: Wan ZongShun <mcuos.com@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
Signed-off-by: Ashay Jaiswal <ashayj@codeaurora.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Wan ZongShun <mcuos.com@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/rtc/Kconfig
drivers/rtc/Makefile
drivers/rtc/rtc-pm8xxx.c [new file with mode: 0644]
include/linux/mfd/pm8xxx/rtc.h [new file with mode: 0644]

index 55affcdc46415dbb8ac96a64403bad698940e041..5a538fc1cc8582bbe714fd6d9fbcfb8cc54e81cd 100644 (file)
@@ -1034,6 +1034,16 @@ config RTC_DRV_LPC32XX
          This driver can also be buillt as a module. If so, the module
          will be called rtc-lpc32xx.
 
+config RTC_DRV_PM8XXX
+       tristate "Qualcomm PMIC8XXX RTC"
+       depends on MFD_PM8XXX
+       help
+         If you say yes here you get support for the
+         Qualcomm PMIC8XXX RTC.
+
+         To compile this driver as a module, choose M here: the
+         module will be called rtc-pm8xxx.
+
 config RTC_DRV_TEGRA
        tristate "NVIDIA Tegra Internal RTC driver"
        depends on RTC_CLASS && ARCH_TEGRA
index 0ffefe877bfadca0fcf1730beaff016adc268ea2..6e6982335c10d9a209c3da9441e2b822ebae1380 100644 (file)
@@ -77,6 +77,7 @@ obj-$(CONFIG_RTC_DRV_PCF2123) += rtc-pcf2123.o
 obj-$(CONFIG_RTC_DRV_PCF50633) += rtc-pcf50633.o
 obj-$(CONFIG_RTC_DRV_PL030)    += rtc-pl030.o
 obj-$(CONFIG_RTC_DRV_PL031)    += rtc-pl031.o
+obj-$(CONFIG_RTC_DRV_PM8XXX)   += rtc-pm8xxx.o
 obj-$(CONFIG_RTC_DRV_PS3)      += rtc-ps3.o
 obj-$(CONFIG_RTC_DRV_PUV3)     += rtc-puv3.o
 obj-$(CONFIG_RTC_DRV_PXA)      += rtc-pxa.o
diff --git a/drivers/rtc/rtc-pm8xxx.c b/drivers/rtc/rtc-pm8xxx.c
new file mode 100644 (file)
index 0000000..d420e9d
--- /dev/null
@@ -0,0 +1,550 @@
+/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/rtc.h>
+#include <linux/pm.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#include <linux/mfd/pm8xxx/core.h>
+#include <linux/mfd/pm8xxx/rtc.h>
+
+
+/* RTC Register offsets from RTC CTRL REG */
+#define PM8XXX_ALARM_CTRL_OFFSET       0x01
+#define PM8XXX_RTC_WRITE_OFFSET                0x02
+#define PM8XXX_RTC_READ_OFFSET         0x06
+#define PM8XXX_ALARM_RW_OFFSET         0x0A
+
+/* RTC_CTRL register bit fields */
+#define PM8xxx_RTC_ENABLE              BIT(7)
+#define PM8xxx_RTC_ALARM_ENABLE                BIT(1)
+#define PM8xxx_RTC_ALARM_CLEAR         BIT(0)
+
+#define NUM_8_BIT_RTC_REGS             0x4
+
+/**
+ * struct pm8xxx_rtc -  rtc driver internal structure
+ * @rtc:               rtc device for this driver.
+ * @rtc_alarm_irq:     rtc alarm irq number.
+ * @rtc_base:          address of rtc control register.
+ * @rtc_read_base:     base address of read registers.
+ * @rtc_write_base:    base address of write registers.
+ * @alarm_rw_base:     base address of alarm registers.
+ * @ctrl_reg:          rtc control register.
+ * @rtc_dev:           device structure.
+ * @ctrl_reg_lock:     spinlock protecting access to ctrl_reg.
+ */
+struct pm8xxx_rtc {
+       struct rtc_device *rtc;
+       int rtc_alarm_irq;
+       int rtc_base;
+       int rtc_read_base;
+       int rtc_write_base;
+       int alarm_rw_base;
+       u8  ctrl_reg;
+       struct device *rtc_dev;
+       spinlock_t ctrl_reg_lock;
+};
+
+/*
+ * The RTC registers need to be read/written one byte at a time. This is a
+ * hardware limitation.
+ */
+static int pm8xxx_read_wrapper(struct pm8xxx_rtc *rtc_dd, u8 *rtc_val,
+               int base, int count)
+{
+       int i, rc;
+       struct device *parent = rtc_dd->rtc_dev->parent;
+
+       for (i = 0; i < count; i++) {
+               rc = pm8xxx_readb(parent, base + i, &rtc_val[i]);
+               if (rc < 0) {
+                       dev_err(rtc_dd->rtc_dev, "PMIC read failed\n");
+                       return rc;
+               }
+       }
+
+       return 0;
+}
+
+static int pm8xxx_write_wrapper(struct pm8xxx_rtc *rtc_dd, u8 *rtc_val,
+               int base, int count)
+{
+       int i, rc;
+       struct device *parent = rtc_dd->rtc_dev->parent;
+
+       for (i = 0; i < count; i++) {
+               rc = pm8xxx_writeb(parent, base + i, rtc_val[i]);
+               if (rc < 0) {
+                       dev_err(rtc_dd->rtc_dev, "PMIC write failed\n");
+                       return rc;
+               }
+       }
+
+       return 0;
+}
+
+/*
+ * Steps to write the RTC registers.
+ * 1. Disable alarm if enabled.
+ * 2. Write 0x00 to LSB.
+ * 3. Write Byte[1], Byte[2], Byte[3] then Byte[0].
+ * 4. Enable alarm if disabled in step 1.
+ */
+static int pm8xxx_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+       int rc, i;
+       unsigned long secs, irq_flags;
+       u8 value[NUM_8_BIT_RTC_REGS], reg = 0, alarm_enabled = 0, ctrl_reg;
+       struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
+
+       rtc_tm_to_time(tm, &secs);
+
+       for (i = 0; i < NUM_8_BIT_RTC_REGS; i++) {
+               value[i] = secs & 0xFF;
+               secs >>= 8;
+       }
+
+       dev_dbg(dev, "Seconds value to be written to RTC = %lu\n", secs);
+
+       spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
+       ctrl_reg = rtc_dd->ctrl_reg;
+
+       if (ctrl_reg & PM8xxx_RTC_ALARM_ENABLE) {
+               alarm_enabled = 1;
+               ctrl_reg &= ~PM8xxx_RTC_ALARM_ENABLE;
+               rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base,
+                               1);
+               if (rc < 0) {
+                       dev_err(dev, "Write to RTC control register "
+                                                               "failed\n");
+                       goto rtc_rw_fail;
+               }
+               rtc_dd->ctrl_reg = ctrl_reg;
+       } else
+               spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
+
+       /* Write 0 to Byte[0] */
+       reg = 0;
+       rc = pm8xxx_write_wrapper(rtc_dd, &reg, rtc_dd->rtc_write_base, 1);
+       if (rc < 0) {
+               dev_err(dev, "Write to RTC write data register failed\n");
+               goto rtc_rw_fail;
+       }
+
+       /* Write Byte[1], Byte[2], Byte[3] */
+       rc = pm8xxx_write_wrapper(rtc_dd, value + 1,
+                                       rtc_dd->rtc_write_base + 1, 3);
+       if (rc < 0) {
+               dev_err(dev, "Write to RTC write data register failed\n");
+               goto rtc_rw_fail;
+       }
+
+       /* Write Byte[0] */
+       rc = pm8xxx_write_wrapper(rtc_dd, value, rtc_dd->rtc_write_base, 1);
+       if (rc < 0) {
+               dev_err(dev, "Write to RTC write data register failed\n");
+               goto rtc_rw_fail;
+       }
+
+       if (alarm_enabled) {
+               ctrl_reg |= PM8xxx_RTC_ALARM_ENABLE;
+               rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base,
+                                                                       1);
+               if (rc < 0) {
+                       dev_err(dev, "Write to RTC control register "
+                                                               "failed\n");
+                       goto rtc_rw_fail;
+               }
+               rtc_dd->ctrl_reg = ctrl_reg;
+       }
+
+rtc_rw_fail:
+       if (alarm_enabled)
+               spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
+
+       return rc;
+}
+
+static int pm8xxx_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+       int rc;
+       u8 value[NUM_8_BIT_RTC_REGS], reg;
+       unsigned long secs;
+       struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
+
+       rc = pm8xxx_read_wrapper(rtc_dd, value, rtc_dd->rtc_read_base,
+                                                       NUM_8_BIT_RTC_REGS);
+       if (rc < 0) {
+               dev_err(dev, "RTC read data register failed\n");
+               return rc;
+       }
+
+       /*
+        * Read the LSB again and check if there has been a carry over.
+        * If there is, redo the read operation.
+        */
+       rc = pm8xxx_read_wrapper(rtc_dd, &reg, rtc_dd->rtc_read_base, 1);
+       if (rc < 0) {
+               dev_err(dev, "RTC read data register failed\n");
+               return rc;
+       }
+
+       if (unlikely(reg < value[0])) {
+               rc = pm8xxx_read_wrapper(rtc_dd, value,
+                               rtc_dd->rtc_read_base, NUM_8_BIT_RTC_REGS);
+               if (rc < 0) {
+                       dev_err(dev, "RTC read data register failed\n");
+                       return rc;
+               }
+       }
+
+       secs = value[0] | (value[1] << 8) | (value[2] << 16) | (value[3] << 24);
+
+       rtc_time_to_tm(secs, tm);
+
+       rc = rtc_valid_tm(tm);
+       if (rc < 0) {
+               dev_err(dev, "Invalid time read from RTC\n");
+               return rc;
+       }
+
+       dev_dbg(dev, "secs = %lu, h:m:s == %d:%d:%d, d/m/y = %d/%d/%d\n",
+                               secs, tm->tm_hour, tm->tm_min, tm->tm_sec,
+                               tm->tm_mday, tm->tm_mon, tm->tm_year);
+
+       return 0;
+}
+
+static int pm8xxx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+       int rc, i;
+       u8 value[NUM_8_BIT_RTC_REGS], ctrl_reg;
+       unsigned long secs, irq_flags;
+       struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
+
+       rtc_tm_to_time(&alarm->time, &secs);
+
+       for (i = 0; i < NUM_8_BIT_RTC_REGS; i++) {
+               value[i] = secs & 0xFF;
+               secs >>= 8;
+       }
+
+       spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
+
+       rc = pm8xxx_write_wrapper(rtc_dd, value, rtc_dd->alarm_rw_base,
+                                                       NUM_8_BIT_RTC_REGS);
+       if (rc < 0) {
+               dev_err(dev, "Write to RTC ALARM register failed\n");
+               goto rtc_rw_fail;
+       }
+
+       ctrl_reg = rtc_dd->ctrl_reg;
+       ctrl_reg = alarm->enabled ? (ctrl_reg | PM8xxx_RTC_ALARM_ENABLE) :
+                                       (ctrl_reg & ~PM8xxx_RTC_ALARM_ENABLE);
+
+       rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, 1);
+       if (rc < 0) {
+               dev_err(dev, "Write to RTC control register failed\n");
+               goto rtc_rw_fail;
+       }
+
+       rtc_dd->ctrl_reg = ctrl_reg;
+
+       dev_dbg(dev, "Alarm Set for h:r:s=%d:%d:%d, d/m/y=%d/%d/%d\n",
+                               alarm->time.tm_hour, alarm->time.tm_min,
+                               alarm->time.tm_sec, alarm->time.tm_mday,
+                               alarm->time.tm_mon, alarm->time.tm_year);
+rtc_rw_fail:
+       spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
+       return rc;
+}
+
+static int pm8xxx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+       int rc;
+       u8 value[NUM_8_BIT_RTC_REGS];
+       unsigned long secs;
+       struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
+
+       rc = pm8xxx_read_wrapper(rtc_dd, value, rtc_dd->alarm_rw_base,
+                       NUM_8_BIT_RTC_REGS);
+       if (rc < 0) {
+               dev_err(dev, "RTC alarm time read failed\n");
+               return rc;
+       }
+
+       secs = value[0] | (value[1] << 8) | (value[2] << 16) | (value[3] << 24);
+
+       rtc_time_to_tm(secs, &alarm->time);
+
+       rc = rtc_valid_tm(&alarm->time);
+       if (rc < 0) {
+               dev_err(dev, "Invalid alarm time read from RTC\n");
+               return rc;
+       }
+
+       dev_dbg(dev, "Alarm set for - h:r:s=%d:%d:%d, d/m/y=%d/%d/%d\n",
+                               alarm->time.tm_hour, alarm->time.tm_min,
+                               alarm->time.tm_sec, alarm->time.tm_mday,
+                               alarm->time.tm_mon, alarm->time.tm_year);
+
+       return 0;
+}
+
+static int pm8xxx_rtc_alarm_irq_enable(struct device *dev, unsigned int enable)
+{
+       int rc;
+       unsigned long irq_flags;
+       struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
+       u8 ctrl_reg;
+
+       spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
+       ctrl_reg = rtc_dd->ctrl_reg;
+       ctrl_reg = (enable) ? (ctrl_reg | PM8xxx_RTC_ALARM_ENABLE) :
+                               (ctrl_reg & ~PM8xxx_RTC_ALARM_ENABLE);
+
+       rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, 1);
+       if (rc < 0) {
+               dev_err(dev, "Write to RTC control register failed\n");
+               goto rtc_rw_fail;
+       }
+
+       rtc_dd->ctrl_reg = ctrl_reg;
+
+rtc_rw_fail:
+       spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
+       return rc;
+}
+
+static struct rtc_class_ops pm8xxx_rtc_ops = {
+       .read_time      = pm8xxx_rtc_read_time,
+       .set_alarm      = pm8xxx_rtc_set_alarm,
+       .read_alarm     = pm8xxx_rtc_read_alarm,
+       .alarm_irq_enable = pm8xxx_rtc_alarm_irq_enable,
+};
+
+static irqreturn_t pm8xxx_alarm_trigger(int irq, void *dev_id)
+{
+       struct pm8xxx_rtc *rtc_dd = dev_id;
+       u8 ctrl_reg;
+       int rc;
+       unsigned long irq_flags;
+
+       rtc_update_irq(rtc_dd->rtc, 1, RTC_IRQF | RTC_AF);
+
+       spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
+
+       /* Clear the alarm enable bit */
+       ctrl_reg = rtc_dd->ctrl_reg;
+       ctrl_reg &= ~PM8xxx_RTC_ALARM_ENABLE;
+
+       rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, 1);
+       if (rc < 0) {
+               spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
+               dev_err(rtc_dd->rtc_dev, "Write to RTC control register "
+                                                               "failed\n");
+               goto rtc_alarm_handled;
+       }
+
+       rtc_dd->ctrl_reg = ctrl_reg;
+       spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
+
+       /* Clear RTC alarm register */
+       rc = pm8xxx_read_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base +
+                                               PM8XXX_ALARM_CTRL_OFFSET, 1);
+       if (rc < 0) {
+               dev_err(rtc_dd->rtc_dev, "RTC Alarm control register read "
+                                                               "failed\n");
+               goto rtc_alarm_handled;
+       }
+
+       ctrl_reg &= ~PM8xxx_RTC_ALARM_CLEAR;
+       rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base +
+                                               PM8XXX_ALARM_CTRL_OFFSET, 1);
+       if (rc < 0)
+               dev_err(rtc_dd->rtc_dev, "Write to RTC Alarm control register"
+                                                               " failed\n");
+
+rtc_alarm_handled:
+       return IRQ_HANDLED;
+}
+
+static int __devinit pm8xxx_rtc_probe(struct platform_device *pdev)
+{
+       int rc;
+       u8 ctrl_reg;
+       bool rtc_write_enable = false;
+       struct pm8xxx_rtc *rtc_dd;
+       struct resource *rtc_resource;
+       const struct pm8xxx_rtc_platform_data *pdata =
+                                               dev_get_platdata(&pdev->dev);
+
+       if (pdata != NULL)
+               rtc_write_enable = pdata->rtc_write_enable;
+
+       rtc_dd = kzalloc(sizeof(*rtc_dd), GFP_KERNEL);
+       if (rtc_dd == NULL) {
+               dev_err(&pdev->dev, "Unable to allocate memory!\n");
+               return -ENOMEM;
+       }
+
+       /* Initialise spinlock to protect RTC control register */
+       spin_lock_init(&rtc_dd->ctrl_reg_lock);
+
+       rtc_dd->rtc_alarm_irq = platform_get_irq(pdev, 0);
+       if (rtc_dd->rtc_alarm_irq < 0) {
+               dev_err(&pdev->dev, "Alarm IRQ resource absent!\n");
+               rc = -ENXIO;
+               goto fail_rtc_enable;
+       }
+
+       rtc_resource = platform_get_resource_byname(pdev, IORESOURCE_IO,
+                                                       "pmic_rtc_base");
+       if (!(rtc_resource && rtc_resource->start)) {
+               dev_err(&pdev->dev, "RTC IO resource absent!\n");
+               rc = -ENXIO;
+               goto fail_rtc_enable;
+       }
+
+       rtc_dd->rtc_base = rtc_resource->start;
+
+       /* Setup RTC register addresses */
+       rtc_dd->rtc_write_base = rtc_dd->rtc_base + PM8XXX_RTC_WRITE_OFFSET;
+       rtc_dd->rtc_read_base = rtc_dd->rtc_base + PM8XXX_RTC_READ_OFFSET;
+       rtc_dd->alarm_rw_base = rtc_dd->rtc_base + PM8XXX_ALARM_RW_OFFSET;
+
+       rtc_dd->rtc_dev = &pdev->dev;
+
+       /* Check if the RTC is on, else turn it on */
+       rc = pm8xxx_read_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, 1);
+       if (rc < 0) {
+               dev_err(&pdev->dev, "RTC control register read failed!\n");
+               goto fail_rtc_enable;
+       }
+
+       if (!(ctrl_reg & PM8xxx_RTC_ENABLE)) {
+               ctrl_reg |= PM8xxx_RTC_ENABLE;
+               rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base,
+                                                                       1);
+               if (rc < 0) {
+                       dev_err(&pdev->dev, "Write to RTC control register "
+                                                               "failed\n");
+                       goto fail_rtc_enable;
+               }
+       }
+
+       rtc_dd->ctrl_reg = ctrl_reg;
+       if (rtc_write_enable == true)
+               pm8xxx_rtc_ops.set_time = pm8xxx_rtc_set_time;
+
+       platform_set_drvdata(pdev, rtc_dd);
+
+       /* Register the RTC device */
+       rtc_dd->rtc = rtc_device_register("pm8xxx_rtc", &pdev->dev,
+                               &pm8xxx_rtc_ops, THIS_MODULE);
+       if (IS_ERR(rtc_dd->rtc)) {
+               dev_err(&pdev->dev, "%s: RTC registration failed (%ld)\n",
+                                       __func__, PTR_ERR(rtc_dd->rtc));
+               rc = PTR_ERR(rtc_dd->rtc);
+               goto fail_rtc_enable;
+       }
+
+       /* Request the alarm IRQ */
+       rc = request_any_context_irq(rtc_dd->rtc_alarm_irq,
+                                pm8xxx_alarm_trigger, IRQF_TRIGGER_RISING,
+                                "pm8xxx_rtc_alarm", rtc_dd);
+       if (rc < 0) {
+               dev_err(&pdev->dev, "Request IRQ failed (%d)\n", rc);
+               goto fail_req_irq;
+       }
+
+       device_init_wakeup(&pdev->dev, 1);
+
+       dev_dbg(&pdev->dev, "Probe success !!\n");
+
+       return 0;
+
+fail_req_irq:
+       rtc_device_unregister(rtc_dd->rtc);
+fail_rtc_enable:
+       platform_set_drvdata(pdev, NULL);
+       kfree(rtc_dd);
+       return rc;
+}
+
+static int __devexit pm8xxx_rtc_remove(struct platform_device *pdev)
+{
+       struct pm8xxx_rtc *rtc_dd = platform_get_drvdata(pdev);
+
+       device_init_wakeup(&pdev->dev, 0);
+       free_irq(rtc_dd->rtc_alarm_irq, rtc_dd);
+       rtc_device_unregister(rtc_dd->rtc);
+       platform_set_drvdata(pdev, NULL);
+       kfree(rtc_dd);
+
+       return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int pm8xxx_rtc_resume(struct device *dev)
+{
+       struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
+
+       if (device_may_wakeup(dev))
+               disable_irq_wake(rtc_dd->rtc_alarm_irq);
+
+       return 0;
+}
+
+static int pm8xxx_rtc_suspend(struct device *dev)
+{
+       struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
+
+       if (device_may_wakeup(dev))
+               enable_irq_wake(rtc_dd->rtc_alarm_irq);
+
+       return 0;
+}
+#endif
+
+SIMPLE_DEV_PM_OPS(pm8xxx_rtc_pm_ops, pm8xxx_rtc_suspend, pm8xxx_rtc_resume);
+
+static struct platform_driver pm8xxx_rtc_driver = {
+       .probe          = pm8xxx_rtc_probe,
+       .remove         = __devexit_p(pm8xxx_rtc_remove),
+       .driver = {
+               .name   = PM8XXX_RTC_DEV_NAME,
+               .owner  = THIS_MODULE,
+               .pm     = &pm8xxx_rtc_pm_ops,
+       },
+};
+
+static int __init pm8xxx_rtc_init(void)
+{
+       return platform_driver_register(&pm8xxx_rtc_driver);
+}
+module_init(pm8xxx_rtc_init);
+
+static void __exit pm8xxx_rtc_exit(void)
+{
+       platform_driver_unregister(&pm8xxx_rtc_driver);
+}
+module_exit(pm8xxx_rtc_exit);
+
+MODULE_ALIAS("platform:rtc-pm8xxx");
+MODULE_DESCRIPTION("PMIC8xxx RTC driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Anirudh Ghayal <aghayal@codeaurora.org>");
diff --git a/include/linux/mfd/pm8xxx/rtc.h b/include/linux/mfd/pm8xxx/rtc.h
new file mode 100644 (file)
index 0000000..14f1983
--- /dev/null
@@ -0,0 +1,25 @@
+/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __RTC_PM8XXX_H__
+#define __RTC_PM8XXX_H__
+
+#define PM8XXX_RTC_DEV_NAME     "rtc-pm8xxx"
+/**
+ * struct pm8xxx_rtc_pdata - RTC driver platform data
+ * @rtc_write_enable: variable stating RTC write capability
+ */
+struct pm8xxx_rtc_platform_data {
+       bool rtc_write_enable;
+};
+
+#endif /* __RTC_PM8XXX_H__ */