uboot-at91: use sdmmc0 as booting media for sama5d27_som1_ek

Commit adc69fe (""uboot-at91: changed som1 ek default defconfigs")
changed the booting media to sdmmc1 as default booting w/o any reason.
The Microchip releases for the rest of supported distributions (Buildroot,
Yocto Project) uses sdmmc0 as default booting media for this board.
Thus change it back to sdmmc0. With this remove references to sdmmc1
config. The initial commit cannot be cleanly reverted.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>

diff --git a/package/boot/uboot-at91/Makefile b/package/boot/uboot-at91/Makefile
index d75e3ba3aff9eee04c322dda72ed393296514405..f75a3878366814cb6eaeafc50b9b5e8d71b5fdef 100644 (file)
--- a/package/boot/uboot-at91/Makefile
+++ b/package/boot/uboot-at91/Makefile
@@ -107,8 +107,8 @@ define U-Boot/sama5d4_xplained_nandflash
   BUILD_DEVICES:=microchip_sama5d3-xplained
 endef
 
-define U-Boot/sama5d27_som1_ek_mmc1
-  NAME:=SAMA5D27 SOM1 Ek (SDCard1)
+define U-Boot/sama5d27_som1_ek_mmc
+  NAME:=SAMA5D27 SOM1 Ek (SDCard0)
   BUILD_SUBTARGET:=sama5
   BUILD_DEVICES:=microchip_sama5d27-som1-ek
 endef
@@ -163,7 +163,7 @@ UBOOT_TARGETS := \
        sama5d4_xplained_mmc \
        sama5d4_xplained_spiflash \
        sama5d4_xplained_nandflash\
-       sama5d27_som1_ek_mmc1 \
+       sama5d27_som1_ek_mmc \
        sama5d27_som1_ek_qspiflash \
        sama5d27_wlsom1_ek_mmc \
        sama5d27_wlsom1_ek_qspiflash \

diff --git a/target/linux/at91/image/sama5.mk b/target/linux/at91/image/sama5.mk
index 9078db525f97750455dbee266e4b37fbd28ea9b8..d108d27908eabc0d1b9b165cce44bae369ca2e42 100644 (file)
--- a/target/linux/at91/image/sama5.mk
+++ b/target/linux/at91/image/sama5.mk
@@ -15,23 +15,17 @@ define Build/at91-sdcard
        $(KDIR)/$(DEVICE_NAME)-fit-zImage.itb \
        ::$(DEVICE_NAME)-fit.itb
 
-  $(if $(findstring sama5d27-som1-ek,$@), \
-      mcopy -i $@.boot \
-          $(BIN_DIR)/u-boot-$(DEVICE_DTS:at91-%=%)_mmc1/u-boot.bin \
-          ::u-boot.bin
-      mcopy -i $@.boot \
-          $(BIN_DIR)/at91bootstrap-$(DEVICE_DTS:at91-%=%)sd1_uboot/at91bootstrap.bin \
-          ::BOOT.bin,
-      mcopy -i $@.boot \
-          $(BIN_DIR)/u-boot-$(DEVICE_DTS:at91-%=%)_mmc/u-boot.bin \
-          ::u-boot.bin
+  mcopy -i $@.boot \
+       $(BIN_DIR)/u-boot-$(DEVICE_DTS:at91-%=%)_mmc/u-boot.bin \
+       ::u-boot.bin
+
       $(if $(findstring sama5d4-xplained,$@), \
           mcopy -i $@.boot \
               $(BIN_DIR)/at91bootstrap-$(DEVICE_DTS:at91-%=%)sd_uboot_secure/at91bootstrap.bin \
               ::BOOT.bin,
           mcopy -i $@.boot \
               $(BIN_DIR)/at91bootstrap-$(DEVICE_DTS:at91-%=%)sd_uboot/at91bootstrap.bin \
-              ::BOOT.bin))
+              ::BOOT.bin)
 
   $(CP) uboot-env.txt $@-uboot-env.txt
   sed -i '2d;3d' $@-uboot-env.txt

diff --git a/target/linux/at91/image/uboot-env.txt b/target/linux/at91/image/uboot-env.txt
index 14f983d03920b70981510921942986346788aba3..c30bf42ec3aff1dd0dffa59e5fb620eaf3d9a6f7 100644 (file)
--- a/target/linux/at91/image/uboot-env.txt
+++ b/target/linux/at91/image/uboot-env.txt
@@ -6,8 +6,8 @@ bootargsd2=console=ttyS0,115200 earlyprintk root=/dev/mmcblk1p2 rw rootwait root
 bootargsxx=console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait rootfstype=ext4
 bootcmd=run setloadaddr; run setbootargs; run fatload_mmc; bootm ${loadaddr}
 bootdelay=1
-fatload_mmc=if test ${board_name} = atmel,sama5d2-xplained || test ${board_name} = atmel,sama5d27-som1-ek || test ${board_name} = microchip,sama7g5ek; then fatload mmc 1:1 ${loadaddr} ${board}-fit.itb; else fatload mmc 0:1 ${loadaddr} ${board}-fit.itb; fi
-setbootargs=if test ${board_name} = atmel,sama5d2-xplained || test ${board_name} = atmel,sama5d27-som1-ek || test ${board_name} = microchip,sama7g5ek; then setenv bootargs ${bootargsd2}; else setenv bootargs ${bootargsxx}; fi
+fatload_mmc=if test ${board_name} = atmel,sama5d2-xplained || test ${board_name} = microchip,sama7g5ek; then fatload mmc 1:1 ${loadaddr} ${board}-fit.itb; else fatload mmc 0:1 ${loadaddr} ${board}-fit.itb; fi
+setbootargs=if test ${board_name} = atmel,sama5d2-xplained || test ${board_name} = microchip,sama7g5ek; then setenv bootargs ${bootargsd2}; else setenv bootargs ${bootargsxx}; fi
 setloadaddr=if test ${board_name} = microchip,sama7g5ek; then setenv loadaddr 0x63000000; else setenv loadaddr 0x21000000; fi
 ethact=gmac0
 stderr=serial