--- /dev/null
+/*
+ * (C) Copyright 2003
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*****************************************************************************
+ * file: micro.c
+ * abstract: This file contains the function, xsvfExecute(),
+ * call for interpreting the XSVF commands.
+ * Usage: Call xsvfExecute() to process XSVF data.
+ * The XSVF data is retrieved by readByte() in ports.c
+ * Remove the main function if you already have one.
+ * Options: XSVF_SUPPORT_COMPRESSION
+ * This define supports the XC9500/XL compression scheme.
+ * This define adds support for XSDRINC and XSETSDRMASKS.
+ * XSVF_SUPPORT_ERRORCODES
+ * This define causes the xsvfExecute function to return
+ * an error code for specific errors. See error codes below.
+ * If this is not defined, the return value defaults to the
+ * legacy values for backward compatibility:
+ * 1 = success; 0 = failure.
+ * Debugging: DEBUG_MODE (Legacy name)
+ * Define DEBUG_MODE to compile with debugging features.
+ * Both micro.c and ports.c must be compiled with the DEBUG_MODE
+ * defined to enable the standalone main implementation in
+ * micro.c that reads XSVF from a file.
+ * History: v2.00 - Original XSVF implementation.
+ * v4.04 - Added delay at end of XSIR for XC18v00 support.
+ * Added new commands for CoolRunner support:
+ * XSTATE, XENDIR, XENDDR
+ * v4.05 - Cleanup micro.c but leave ports.c intact.
+ * v4.06 - Fix xsvfGotoTapState for retry transition.
+ * v4.07 - Update example waitTime implementations for
+ * compatibility with Virtex-II.
+ * v4.10 - Add new XSIR2 command that supports a 2-byte
+ * IR-length parameter for IR shifts > 255 bits.
+ * v4.11 - No change. Update version to match SVF2XSVF xlator.
+ * v4.14 - Added XCOMMENT.
+ * v5.00 - Improve XSTATE support.
+ * Added XWAIT.
+ *****************************************************************************/
+
+#include <common.h>
+#include <command.h>
+#include <asm/processor.h>
+
+#include "micro.h"
+#include "lenval.h"
+#include "ports.h"
+
+
+extern const unsigned char fpgadata[];
+extern int filesize;
+
+
+/*============================================================================
+ * XSVF #define
+ ============================================================================*/
+
+#define XSVF_VERSION "5.00"
+
+/*****************************************************************************
+ * Define: XSVF_SUPPORT_COMPRESSION
+ * Description: Define this to support the XC9500/XL XSVF data compression
+ * scheme.
+ * Code size can be reduced by NOT supporting this feature.
+ * However, you must use the -nc (no compress) option when
+ * translating SVF to XSVF using the SVF2XSVF translator.
+ * Corresponding, uncompressed XSVF may be larger.
+ *****************************************************************************/
+#ifndef XSVF_SUPPORT_COMPRESSION
+#define XSVF_SUPPORT_COMPRESSION 1
+#endif
+
+/*****************************************************************************
+ * Define: XSVF_SUPPORT_ERRORCODES
+ * Description: Define this to support the new XSVF error codes.
+ * (The original XSVF player just returned 1 for success and
+ * 0 for an unspecified failure.)
+ *****************************************************************************/
+#ifndef XSVF_SUPPORT_ERRORCODES
+#define XSVF_SUPPORT_ERRORCODES 1
+#endif
+
+#ifdef XSVF_SUPPORT_ERRORCODES
+#define XSVF_ERRORCODE(errorCode) errorCode
+#else /* Use legacy error code */
+#define XSVF_ERRORCODE(errorCode) ((errorCode==XSVF_ERROR_NONE)?1:0)
+#endif /* XSVF_SUPPORT_ERRORCODES */
+
+
+/*============================================================================
+ * DEBUG_MODE #define
+ ============================================================================*/
+#define DEBUG_MODE
+
+#ifdef DEBUG_MODE
+#define XSVFDBG_PRINTF(iDebugLevel,pzFormat) \
+ { if ( xsvf_iDebugLevel >= iDebugLevel ) \
+ printf( pzFormat ); }
+#define XSVFDBG_PRINTF1(iDebugLevel,pzFormat,arg1) \
+ { if ( xsvf_iDebugLevel >= iDebugLevel ) \
+ printf( pzFormat, arg1 ); }
+#define XSVFDBG_PRINTF2(iDebugLevel,pzFormat,arg1,arg2) \
+ { if ( xsvf_iDebugLevel >= iDebugLevel ) \
+ printf( pzFormat, arg1, arg2 ); }
+#define XSVFDBG_PRINTF3(iDebugLevel,pzFormat,arg1,arg2,arg3) \
+ { if ( xsvf_iDebugLevel >= iDebugLevel ) \
+ printf( pzFormat, arg1, arg2, arg3 ); }
+#define XSVFDBG_PRINTLENVAL(iDebugLevel,plenVal) \
+ { if ( xsvf_iDebugLevel >= iDebugLevel ) \
+ xsvfPrintLenVal(plenVal); }
+#else /* !DEBUG_MODE */
+#define XSVFDBG_PRINTF(iDebugLevel,pzFormat)
+#define XSVFDBG_PRINTF1(iDebugLevel,pzFormat,arg1)
+#define XSVFDBG_PRINTF2(iDebugLevel,pzFormat,arg1,arg2)
+#define XSVFDBG_PRINTF3(iDebugLevel,pzFormat,arg1,arg2,arg3)
+#define XSVFDBG_PRINTLENVAL(iDebugLevel,plenVal)
+#endif /* DEBUG_MODE */
+
+
+/*============================================================================
+ * XSVF Type Declarations
+ ============================================================================*/
+
+/*****************************************************************************
+ * Struct: SXsvfInfo
+ * Description: This structure contains all of the data used during the
+ * execution of the XSVF. Some data is persistent, predefined
+ * information (e.g. lRunTestTime). The bulk of this struct's
+ * size is due to the lenVal structs (defined in lenval.h)
+ * which contain buffers for the active shift data. The MAX_LEN
+ * #define in lenval.h defines the size of these buffers.
+ * These buffers must be large enough to store the longest
+ * shift data in your XSVF file. For example:
+ * MAX_LEN >= ( longest_shift_data_in_bits / 8 )
+ * Because the lenVal struct dominates the space usage of this
+ * struct, the rough size of this struct is:
+ * sizeof( SXsvfInfo ) ~= MAX_LEN * 7 (number of lenVals)
+ * xsvfInitialize() contains initialization code for the data
+ * in this struct.
+ * xsvfCleanup() contains cleanup code for the data in this
+ * struct.
+ *****************************************************************************/
+typedef struct tagSXsvfInfo
+{
+ /* XSVF status information */
+ unsigned char ucComplete; /* 0 = running; 1 = complete */
+ unsigned char ucCommand; /* Current XSVF command byte */
+ long lCommandCount; /* Number of commands processed */
+ int iErrorCode; /* An error code. 0 = no error. */
+
+ /* TAP state/sequencing information */
+ unsigned char ucTapState; /* Current TAP state */
+ unsigned char ucEndIR; /* ENDIR TAP state (See SVF) */
+ unsigned char ucEndDR; /* ENDDR TAP state (See SVF) */
+
+ /* RUNTEST information */
+ unsigned char ucMaxRepeat; /* Max repeat loops (for xc9500/xl) */
+ long lRunTestTime; /* Pre-specified RUNTEST time (usec) */
+
+ /* Shift Data Info and Buffers */
+ long lShiftLengthBits; /* Len. current shift data in bits */
+ short sShiftLengthBytes; /* Len. current shift data in bytes */
+
+ lenVal lvTdi; /* Current TDI shift data */
+ lenVal lvTdoExpected; /* Expected TDO shift data */
+ lenVal lvTdoCaptured; /* Captured TDO shift data */
+ lenVal lvTdoMask; /* TDO mask: 0=dontcare; 1=compare */
+
+#ifdef XSVF_SUPPORT_COMPRESSION
+ /* XSDRINC Data Buffers */
+ lenVal lvAddressMask; /* Address mask for XSDRINC */
+ lenVal lvDataMask; /* Data mask for XSDRINC */
+ lenVal lvNextData; /* Next data for XSDRINC */
+#endif /* XSVF_SUPPORT_COMPRESSION */
+} SXsvfInfo;
+
+/* Declare pointer to functions that perform XSVF commands */
+typedef int (*TXsvfDoCmdFuncPtr)( SXsvfInfo* );
+
+/*============================================================================
+ * XSVF Command Bytes
+ ============================================================================*/
+
+/* encodings of xsvf instructions */
+#define XCOMPLETE 0
+#define XTDOMASK 1
+#define XSIR 2
+#define XSDR 3
+#define XRUNTEST 4
+/* Reserved 5 */
+/* Reserved 6 */
+#define XREPEAT 7
+#define XSDRSIZE 8
+#define XSDRTDO 9
+#define XSETSDRMASKS 10
+#define XSDRINC 11
+#define XSDRB 12
+#define XSDRC 13
+#define XSDRE 14
+#define XSDRTDOB 15
+#define XSDRTDOC 16
+#define XSDRTDOE 17
+#define XSTATE 18 /* 4.00 */
+#define XENDIR 19 /* 4.04 */
+#define XENDDR 20 /* 4.04 */
+#define XSIR2 21 /* 4.10 */
+#define XCOMMENT 22 /* 4.14 */
+#define XWAIT 23 /* 5.00 */
+/* Insert new commands here */
+/* and add corresponding xsvfDoCmd function to xsvf_pfDoCmd below. */
+#define XLASTCMD 24 /* Last command marker */
+
+
+/*============================================================================
+ * XSVF Command Parameter Values
+ ============================================================================*/
+
+#define XSTATE_RESET 0 /* 4.00 parameter for XSTATE */
+#define XSTATE_RUNTEST 1 /* 4.00 parameter for XSTATE */
+
+#define XENDXR_RUNTEST 0 /* 4.04 parameter for XENDIR/DR */
+#define XENDXR_PAUSE 1 /* 4.04 parameter for XENDIR/DR */
+
+/* TAP states */
+#define XTAPSTATE_RESET 0x00
+#define XTAPSTATE_RUNTEST 0x01 /* a.k.a. IDLE */
+#define XTAPSTATE_SELECTDR 0x02
+#define XTAPSTATE_CAPTUREDR 0x03
+#define XTAPSTATE_SHIFTDR 0x04
+#define XTAPSTATE_EXIT1DR 0x05
+#define XTAPSTATE_PAUSEDR 0x06
+#define XTAPSTATE_EXIT2DR 0x07
+#define XTAPSTATE_UPDATEDR 0x08
+#define XTAPSTATE_IRSTATES 0x09 /* All IR states begin here */
+#define XTAPSTATE_SELECTIR 0x09
+#define XTAPSTATE_CAPTUREIR 0x0A
+#define XTAPSTATE_SHIFTIR 0x0B
+#define XTAPSTATE_EXIT1IR 0x0C
+#define XTAPSTATE_PAUSEIR 0x0D
+#define XTAPSTATE_EXIT2IR 0x0E
+#define XTAPSTATE_UPDATEIR 0x0F
+
+/*============================================================================
+ * XSVF Function Prototypes
+ ============================================================================*/
+
+int xsvfDoIllegalCmd( SXsvfInfo* pXsvfInfo ); /* Illegal command function */
+int xsvfDoXCOMPLETE( SXsvfInfo* pXsvfInfo );
+int xsvfDoXTDOMASK( SXsvfInfo* pXsvfInfo );
+int xsvfDoXSIR( SXsvfInfo* pXsvfInfo );
+int xsvfDoXSIR2( SXsvfInfo* pXsvfInfo );
+int xsvfDoXSDR( SXsvfInfo* pXsvfInfo );
+int xsvfDoXRUNTEST( SXsvfInfo* pXsvfInfo );
+int xsvfDoXREPEAT( SXsvfInfo* pXsvfInfo );
+int xsvfDoXSDRSIZE( SXsvfInfo* pXsvfInfo );
+int xsvfDoXSDRTDO( SXsvfInfo* pXsvfInfo );
+int xsvfDoXSETSDRMASKS( SXsvfInfo* pXsvfInfo );
+int xsvfDoXSDRINC( SXsvfInfo* pXsvfInfo );
+int xsvfDoXSDRBCE( SXsvfInfo* pXsvfInfo );
+int xsvfDoXSDRTDOBCE( SXsvfInfo* pXsvfInfo );
+int xsvfDoXSTATE( SXsvfInfo* pXsvfInfo );
+int xsvfDoXENDXR( SXsvfInfo* pXsvfInfo );
+int xsvfDoXCOMMENT( SXsvfInfo* pXsvfInfo );
+int xsvfDoXWAIT( SXsvfInfo* pXsvfInfo );
+/* Insert new command functions here */
+
+/*============================================================================
+ * XSVF Global Variables
+ ============================================================================*/
+
+/* Array of XSVF command functions. Must follow command byte value order! */
+/* If your compiler cannot take this form, then convert to a switch statement*/
+TXsvfDoCmdFuncPtr xsvf_pfDoCmd[] =
+{
+ xsvfDoXCOMPLETE, /* 0 */
+ xsvfDoXTDOMASK, /* 1 */
+ xsvfDoXSIR, /* 2 */
+ xsvfDoXSDR, /* 3 */
+ xsvfDoXRUNTEST, /* 4 */
+ xsvfDoIllegalCmd, /* 5 */
+ xsvfDoIllegalCmd, /* 6 */
+ xsvfDoXREPEAT, /* 7 */
+ xsvfDoXSDRSIZE, /* 8 */
+ xsvfDoXSDRTDO, /* 9 */
+#ifdef XSVF_SUPPORT_COMPRESSION
+ xsvfDoXSETSDRMASKS, /* 10 */
+ xsvfDoXSDRINC, /* 11 */
+#else
+ xsvfDoIllegalCmd, /* 10 */
+ xsvfDoIllegalCmd, /* 11 */
+#endif /* XSVF_SUPPORT_COMPRESSION */
+ xsvfDoXSDRBCE, /* 12 */
+ xsvfDoXSDRBCE, /* 13 */
+ xsvfDoXSDRBCE, /* 14 */
+ xsvfDoXSDRTDOBCE, /* 15 */
+ xsvfDoXSDRTDOBCE, /* 16 */
+ xsvfDoXSDRTDOBCE, /* 17 */
+ xsvfDoXSTATE, /* 18 */
+ xsvfDoXENDXR, /* 19 */
+ xsvfDoXENDXR, /* 20 */
+ xsvfDoXSIR2, /* 21 */
+ xsvfDoXCOMMENT, /* 22 */
+ xsvfDoXWAIT /* 23 */
+/* Insert new command functions here */
+};
+
+#ifdef DEBUG_MODE
+char* xsvf_pzCommandName[] =
+{
+ "XCOMPLETE",
+ "XTDOMASK",
+ "XSIR",
+ "XSDR",
+ "XRUNTEST",
+ "Reserved5",
+ "Reserved6",
+ "XREPEAT",
+ "XSDRSIZE",
+ "XSDRTDO",
+ "XSETSDRMASKS",
+ "XSDRINC",
+ "XSDRB",
+ "XSDRC",
+ "XSDRE",
+ "XSDRTDOB",
+ "XSDRTDOC",
+ "XSDRTDOE",
+ "XSTATE",
+ "XENDIR",
+ "XENDDR",
+ "XSIR2",
+ "XCOMMENT",
+ "XWAIT"
+};
+
+char* xsvf_pzErrorName[] =
+{
+ "No error",
+ "ERROR: Unknown",
+ "ERROR: TDO mismatch",
+ "ERROR: TDO mismatch and exceeded max retries",
+ "ERROR: Unsupported XSVF command",
+ "ERROR: Illegal state specification",
+ "ERROR: Data overflows allocated MAX_LEN buffer size"
+};
+
+char* xsvf_pzTapState[] =
+{
+ "RESET", /* 0x00 */
+ "RUNTEST/IDLE", /* 0x01 */
+ "DRSELECT", /* 0x02 */
+ "DRCAPTURE", /* 0x03 */
+ "DRSHIFT", /* 0x04 */
+ "DREXIT1", /* 0x05 */
+ "DRPAUSE", /* 0x06 */
+ "DREXIT2", /* 0x07 */
+ "DRUPDATE", /* 0x08 */
+ "IRSELECT", /* 0x09 */
+ "IRCAPTURE", /* 0x0A */
+ "IRSHIFT", /* 0x0B */
+ "IREXIT1", /* 0x0C */
+ "IRPAUSE", /* 0x0D */
+ "IREXIT2", /* 0x0E */
+ "IRUPDATE" /* 0x0F */
+};
+#endif /* DEBUG_MODE */
+
+//#ifdef DEBUG_MODE
+// FILE* in; /* Legacy DEBUG_MODE file pointer */
+int xsvf_iDebugLevel;
+//#endif /* DEBUG_MODE */
+
+/*============================================================================
+ * Utility Functions
+ ============================================================================*/
+
+/*****************************************************************************
+ * Function: xsvfPrintLenVal
+ * Description: Print the lenval value in hex.
+ * Parameters: plv - ptr to lenval.
+ * Returns: void.
+ *****************************************************************************/
+#ifdef DEBUG_MODE
+void xsvfPrintLenVal( lenVal *plv )
+{
+ int i;
+
+ if ( plv )
+ {
+ printf( "0x" );
+ for ( i = 0; i < plv->len; ++i )
+ {
+ printf( "%02x", ((unsigned int)(plv->val[ i ])) );
+ }
+ }
+}
+#endif /* DEBUG_MODE */
+
+
+/*****************************************************************************
+ * Function: xsvfInfoInit
+ * Description: Initialize the xsvfInfo data.
+ * Parameters: pXsvfInfo - ptr to the XSVF info structure.
+ * Returns: int - 0 = success; otherwise error.
+ *****************************************************************************/
+int xsvfInfoInit( SXsvfInfo* pXsvfInfo )
+{
+ XSVFDBG_PRINTF1( 4, " sizeof( SXsvfInfo ) = %d bytes\n",
+ sizeof( SXsvfInfo ) );
+
+ pXsvfInfo->ucComplete = 0;
+ pXsvfInfo->ucCommand = XCOMPLETE;
+ pXsvfInfo->lCommandCount = 0;
+ pXsvfInfo->iErrorCode = XSVF_ERROR_NONE;
+ pXsvfInfo->ucMaxRepeat = 0;
+ pXsvfInfo->ucTapState = XTAPSTATE_RESET;
+ pXsvfInfo->ucEndIR = XTAPSTATE_RUNTEST;
+ pXsvfInfo->ucEndDR = XTAPSTATE_RUNTEST;
+ pXsvfInfo->lShiftLengthBits = 0L;
+ pXsvfInfo->sShiftLengthBytes= 0;
+ pXsvfInfo->lRunTestTime = 0L;
+
+ return( 0 );
+}
+
+/*****************************************************************************
+ * Function: xsvfInfoCleanup
+ * Description: Cleanup the xsvfInfo data.
+ * Parameters: pXsvfInfo - ptr to the XSVF info structure.
+ * Returns: void.
+ *****************************************************************************/
+void xsvfInfoCleanup( SXsvfInfo* pXsvfInfo )
+{
+}
+
+/*****************************************************************************
+ * Function: xsvfGetAsNumBytes
+ * Description: Calculate the number of bytes the given number of bits
+ * consumes.
+ * Parameters: lNumBits - the number of bits.
+ * Returns: short - the number of bytes to store the number of bits.
+ *****************************************************************************/
+short xsvfGetAsNumBytes( long lNumBits )
+{
+ return( (short)( ( lNumBits + 7L ) / 8L ) );
+}
+
+/*****************************************************************************
+ * Function: xsvfTmsTransition
+ * Description: Apply TMS and transition TAP controller by applying one TCK
+ * cycle.
+ * Parameters: sTms - new TMS value.
+ * Returns: void.
+ *****************************************************************************/
+void xsvfTmsTransition( short sTms )
+{
+ setPort( TMS, sTms );
+ setPort( TCK, 0 );
+ setPort( TCK, 1 );
+}
+
+/*****************************************************************************
+ * Function: xsvfGotoTapState
+ * Description: From the current TAP state, go to the named TAP state.
+ * A target state of RESET ALWAYS causes TMS reset sequence.
+ * All SVF standard stable state paths are supported.
+ * All state transitions are supported except for the following
+ * which cause an XSVF_ERROR_ILLEGALSTATE:
+ * - Target==DREXIT2; Start!=DRPAUSE
+ * - Target==IREXIT2; Start!=IRPAUSE
+ * Parameters: pucTapState - Current TAP state; returns final TAP state.
+ * ucTargetState - New target TAP state.
+ * Returns: int - 0 = success; otherwise error.
+ *****************************************************************************/
+int xsvfGotoTapState( unsigned char* pucTapState,
+ unsigned char ucTargetState )
+{
+ int i;
+ int iErrorCode;
+
+ iErrorCode = XSVF_ERROR_NONE;
+ if ( ucTargetState == XTAPSTATE_RESET )
+ {
+ /* If RESET, always perform TMS reset sequence to reset/sync TAPs */
+ xsvfTmsTransition( 1 );
+ for ( i = 0; i < 5; ++i )
+ {
+ setPort( TCK, 0 );
+ setPort( TCK, 1 );
+ }
+ *pucTapState = XTAPSTATE_RESET;
+ XSVFDBG_PRINTF( 3, " TMS Reset Sequence -> Test-Logic-Reset\n" );
+ XSVFDBG_PRINTF1( 3, " TAP State = %s\n",
+ xsvf_pzTapState[ *pucTapState ] );
+ } else if ( ( ucTargetState != *pucTapState ) &&
+ ( ( ( ucTargetState == XTAPSTATE_EXIT2DR ) && ( *pucTapState != XTAPSTATE_PAUSEDR ) ) ||
+ ( ( ucTargetState == XTAPSTATE_EXIT2IR ) && ( *pucTapState != XTAPSTATE_PAUSEIR ) ) ) )
+ {
+ /* Trap illegal TAP state path specification */
+ iErrorCode = XSVF_ERROR_ILLEGALSTATE;
+ } else {
+ if ( ucTargetState == *pucTapState )
+ {
+ /* Already in target state. Do nothing except when in DRPAUSE
+ or in IRPAUSE to comply with SVF standard */
+ if ( ucTargetState == XTAPSTATE_PAUSEDR )
+ {
+ xsvfTmsTransition( 1 );
+ *pucTapState = XTAPSTATE_EXIT2DR;
+ XSVFDBG_PRINTF1( 3, " TAP State = %s\n",
+ xsvf_pzTapState[ *pucTapState ] );
+ }
+ else if ( ucTargetState == XTAPSTATE_PAUSEIR )
+ {
+ xsvfTmsTransition( 1 );
+ *pucTapState = XTAPSTATE_EXIT2IR;
+ XSVFDBG_PRINTF1( 3, " TAP State = %s\n",
+ xsvf_pzTapState[ *pucTapState ] );
+ }
+ }
+
+ /* Perform TAP state transitions to get to the target state */
+ while ( ucTargetState != *pucTapState )
+ {
+ switch ( *pucTapState )
+ {
+ case XTAPSTATE_RESET:
+ xsvfTmsTransition( 0 );
+ *pucTapState = XTAPSTATE_RUNTEST;
+ break;
+ case XTAPSTATE_RUNTEST:
+ xsvfTmsTransition( 1 );
+ *pucTapState = XTAPSTATE_SELECTDR;
+ break;
+ case XTAPSTATE_SELECTDR:
+ if ( ucTargetState >= XTAPSTATE_IRSTATES )
+ {
+ xsvfTmsTransition( 1 );
+ *pucTapState = XTAPSTATE_SELECTIR;
+ }
+ else
+ {
+ xsvfTmsTransition( 0 );
+ *pucTapState = XTAPSTATE_CAPTUREDR;
+ }
+ break;
+ case XTAPSTATE_CAPTUREDR:
+ if ( ucTargetState == XTAPSTATE_SHIFTDR )
+ {
+ xsvfTmsTransition( 0 );
+ *pucTapState = XTAPSTATE_SHIFTDR;
+ }
+ else
+ {
+ xsvfTmsTransition( 1 );
+ *pucTapState = XTAPSTATE_EXIT1DR;
+ }
+ break;
+ case XTAPSTATE_SHIFTDR:
+ xsvfTmsTransition( 1 );
+ *pucTapState = XTAPSTATE_EXIT1DR;
+ break;
+ case XTAPSTATE_EXIT1DR:
+ if ( ucTargetState == XTAPSTATE_PAUSEDR )
+ {
+ xsvfTmsTransition( 0 );
+ *pucTapState = XTAPSTATE_PAUSEDR;
+ }
+ else
+ {
+ xsvfTmsTransition( 1 );
+ *pucTapState = XTAPSTATE_UPDATEDR;
+ }
+ break;
+ case XTAPSTATE_PAUSEDR:
+ xsvfTmsTransition( 1 );
+ *pucTapState = XTAPSTATE_EXIT2DR;
+ break;
+ case XTAPSTATE_EXIT2DR:
+ if ( ucTargetState == XTAPSTATE_SHIFTDR )
+ {
+ xsvfTmsTransition( 0 );
+ *pucTapState = XTAPSTATE_SHIFTDR;
+ }
+ else
+ {
+ xsvfTmsTransition( 1 );
+ *pucTapState = XTAPSTATE_UPDATEDR;
+ }
+ break;
+ case XTAPSTATE_UPDATEDR:
+ if ( ucTargetState == XTAPSTATE_RUNTEST )
+ {
+ xsvfTmsTransition( 0 );
+ *pucTapState = XTAPSTATE_RUNTEST;
+ }
+ else
+ {
+ xsvfTmsTransition( 1 );
+ *pucTapState = XTAPSTATE_SELECTDR;
+ }
+ break;
+ case XTAPSTATE_SELECTIR:
+ xsvfTmsTransition( 0 );
+ *pucTapState = XTAPSTATE_CAPTUREIR;
+ break;
+ case XTAPSTATE_CAPTUREIR:
+ if ( ucTargetState == XTAPSTATE_SHIFTIR )
+ {
+ xsvfTmsTransition( 0 );
+ *pucTapState = XTAPSTATE_SHIFTIR;
+ }
+ else
+ {
+ xsvfTmsTransition( 1 );
+ *pucTapState = XTAPSTATE_EXIT1IR;
+ }
+ break;
+ case XTAPSTATE_SHIFTIR:
+ xsvfTmsTransition( 1 );
+ *pucTapState = XTAPSTATE_EXIT1IR;
+ break;
+ case XTAPSTATE_EXIT1IR:
+ if ( ucTargetState == XTAPSTATE_PAUSEIR )
+ {
+ xsvfTmsTransition( 0 );
+ *pucTapState = XTAPSTATE_PAUSEIR;
+ }
+ else
+ {
+ xsvfTmsTransition( 1 );
+ *pucTapState = XTAPSTATE_UPDATEIR;
+ }
+ break;
+ case XTAPSTATE_PAUSEIR:
+ xsvfTmsTransition( 1 );
+ *pucTapState = XTAPSTATE_EXIT2IR;
+ break;
+ case XTAPSTATE_EXIT2IR:
+ if ( ucTargetState == XTAPSTATE_SHIFTIR )
+ {
+ xsvfTmsTransition( 0 );
+ *pucTapState = XTAPSTATE_SHIFTIR;
+ }
+ else
+ {
+ xsvfTmsTransition( 1 );
+ *pucTapState = XTAPSTATE_UPDATEIR;
+ }
+ break;
+ case XTAPSTATE_UPDATEIR:
+ if ( ucTargetState == XTAPSTATE_RUNTEST )
+ {
+ xsvfTmsTransition( 0 );
+ *pucTapState = XTAPSTATE_RUNTEST;
+ }
+ else
+ {
+ xsvfTmsTransition( 1 );
+ *pucTapState = XTAPSTATE_SELECTDR;
+ }
+ break;
+ default:
+ iErrorCode = XSVF_ERROR_ILLEGALSTATE;
+ *pucTapState = ucTargetState; /* Exit while loop */
+ break;
+ }
+ XSVFDBG_PRINTF1( 3, " TAP State = %s\n",
+ xsvf_pzTapState[ *pucTapState ] );
+ }
+ }
+
+ return( iErrorCode );
+}
+
+/*****************************************************************************
+ * Function: xsvfShiftOnly
+ * Description: Assumes that starting TAP state is SHIFT-DR or SHIFT-IR.
+ * Shift the given TDI data into the JTAG scan chain.
+ * Optionally, save the TDO data shifted out of the scan chain.
+ * Last shift cycle is special: capture last TDO, set last TDI,
+ * but does not pulse TCK. Caller must pulse TCK and optionally
+ * set TMS=1 to exit shift state.
+ * Parameters: lNumBits - number of bits to shift.
+ * plvTdi - ptr to lenval for TDI data.
+ * plvTdoCaptured - ptr to lenval for storing captured TDO data.
+ * iExitShift - 1=exit at end of shift; 0=stay in Shift-DR.
+ * Returns: void.
+ *****************************************************************************/
+void xsvfShiftOnly( long lNumBits,
+ lenVal* plvTdi,
+ lenVal* plvTdoCaptured,
+ int iExitShift )
+{
+ unsigned char* pucTdi;
+ unsigned char* pucTdo;
+ unsigned char ucTdiByte;
+ unsigned char ucTdoByte;
+ unsigned char ucTdoBit;
+ int i;
+
+ /* assert( ( ( lNumBits + 7 ) / 8 ) == plvTdi->len ); */
+
+ /* Initialize TDO storage len == TDI len */
+ pucTdo = 0;
+ if ( plvTdoCaptured )
+ {
+ plvTdoCaptured->len = plvTdi->len;
+ pucTdo = plvTdoCaptured->val + plvTdi->len;
+ }
+
+ /* Shift LSB first. val[N-1] == LSB. val[0] == MSB. */
+ pucTdi = plvTdi->val + plvTdi->len;
+ while ( lNumBits )
+ {
+ /* Process on a byte-basis */
+ ucTdiByte = (*(--pucTdi));
+ ucTdoByte = 0;
+ for ( i = 0; ( lNumBits && ( i < 8 ) ); ++i )
+ {
+ --lNumBits;
+ if ( iExitShift && !lNumBits )
+ {
+ /* Exit Shift-DR state */
+ setPort( TMS, 1 );
+ }
+
+ /* Set the new TDI value */
+ setPort( TDI, (short)(ucTdiByte & 1) );
+ ucTdiByte >>= 1;
+
+ /* Set TCK low */
+ setPort( TCK, 0 );
+
+ if ( pucTdo )
+ {
+ /* Save the TDO value */
+ ucTdoBit = readTDOBit();
+ ucTdoByte |= ( ucTdoBit << i );
+ }
+
+ /* Set TCK high */
+ setPort( TCK, 1 );
+ }
+
+ /* Save the TDO byte value */
+ if ( pucTdo )
+ {
+ (*(--pucTdo)) = ucTdoByte;
+ }
+ }
+}
+
+/*****************************************************************************
+ * Function: xsvfShift
+ * Description: Goes to the given starting TAP state.
+ * Calls xsvfShiftOnly to shift in the given TDI data and
+ * optionally capture the TDO data.
+ * Compares the TDO captured data against the TDO expected
+ * data.
+ * If a data mismatch occurs, then executes the exception
+ * handling loop upto ucMaxRepeat times.
+ * Parameters: pucTapState - Ptr to current TAP state.
+ * ucStartState - Starting shift state: Shift-DR or Shift-IR.
+ * lNumBits - number of bits to shift.
+ * plvTdi - ptr to lenval for TDI data.
+ * plvTdoCaptured - ptr to lenval for storing TDO data.
+ * plvTdoExpected - ptr to expected TDO data.
+ * plvTdoMask - ptr to TDO mask.
+ * ucEndState - state in which to end the shift.
+ * lRunTestTime - amount of time to wait after the shift.
+ * ucMaxRepeat - Maximum number of retries on TDO mismatch.
+ * Returns: int - 0 = success; otherwise TDO mismatch.
+ * Notes: XC9500XL-only Optimization:
+ * Skip the waitTime() if plvTdoMask->val[0:plvTdoMask->len-1]
+ * is NOT all zeros and sMatch==1.
+ *****************************************************************************/
+int xsvfShift( unsigned char* pucTapState,
+ unsigned char ucStartState,
+ long lNumBits,
+ lenVal* plvTdi,
+ lenVal* plvTdoCaptured,
+ lenVal* plvTdoExpected,
+ lenVal* plvTdoMask,
+ unsigned char ucEndState,
+ long lRunTestTime,
+ unsigned char ucMaxRepeat )
+{
+ int iErrorCode;
+ int iMismatch;
+ unsigned char ucRepeat;
+ int iExitShift;
+
+ iErrorCode = XSVF_ERROR_NONE;
+ iMismatch = 0;
+ ucRepeat = 0;
+ iExitShift = ( ucStartState != ucEndState );
+
+ XSVFDBG_PRINTF1( 3, " Shift Length = %ld\n", lNumBits );
+ XSVFDBG_PRINTF( 4, " TDI = ");
+ XSVFDBG_PRINTLENVAL( 4, plvTdi );
+ XSVFDBG_PRINTF( 4, "\n");
+ XSVFDBG_PRINTF( 4, " TDO Expected = ");
+ XSVFDBG_PRINTLENVAL( 4, plvTdoExpected );
+ XSVFDBG_PRINTF( 4, "\n");
+
+ if ( !lNumBits )
+ {
+ /* Compatibility with XSVF2.00: XSDR 0 = no shift, but wait in RTI */
+ if ( lRunTestTime )
+ {
+ /* Wait for prespecified XRUNTEST time */
+ xsvfGotoTapState( pucTapState, XTAPSTATE_RUNTEST );
+ XSVFDBG_PRINTF1( 3, " Wait = %ld usec\n", lRunTestTime );
+ waitTime( lRunTestTime );
+ }
+ }
+ else
+ {
+ do
+ {
+ /* Goto Shift-DR or Shift-IR */
+ xsvfGotoTapState( pucTapState, ucStartState );
+
+ /* Shift TDI and capture TDO */
+ xsvfShiftOnly( lNumBits, plvTdi, plvTdoCaptured, iExitShift );
+
+ if ( plvTdoExpected )
+ {
+ /* Compare TDO data to expected TDO data */
+ iMismatch = !EqualLenVal( plvTdoExpected,
+ plvTdoCaptured,
+ plvTdoMask );
+ }
+
+ if ( iExitShift )
+ {
+ /* Update TAP state: Shift->Exit */
+ ++(*pucTapState);
+ XSVFDBG_PRINTF1( 3, " TAP State = %s\n",
+ xsvf_pzTapState[ *pucTapState ] );
+
+ if ( iMismatch && lRunTestTime && ( ucRepeat < ucMaxRepeat ) )
+ {
+ XSVFDBG_PRINTF( 4, " TDO Expected = ");
+ XSVFDBG_PRINTLENVAL( 4, plvTdoExpected );
+ XSVFDBG_PRINTF( 4, "\n");
+ XSVFDBG_PRINTF( 4, " TDO Captured = ");
+ XSVFDBG_PRINTLENVAL( 4, plvTdoCaptured );
+ XSVFDBG_PRINTF( 4, "\n");
+ XSVFDBG_PRINTF( 4, " TDO Mask = ");
+ XSVFDBG_PRINTLENVAL( 4, plvTdoMask );
+ XSVFDBG_PRINTF( 4, "\n");
+ XSVFDBG_PRINTF1( 3, " Retry #%d\n", ( ucRepeat + 1 ) );
+ /* Do exception handling retry - ShiftDR only */
+ xsvfGotoTapState( pucTapState, XTAPSTATE_PAUSEDR );
+ /* Shift 1 extra bit */
+ xsvfGotoTapState( pucTapState, XTAPSTATE_SHIFTDR );
+ /* Increment RUNTEST time by an additional 25% */
+ lRunTestTime += ( lRunTestTime >> 2 );
+ }
+ else
+ {
+ /* Do normal exit from Shift-XR */
+ xsvfGotoTapState( pucTapState, ucEndState );
+ }
+
+ if ( lRunTestTime )
+ {
+ /* Wait for prespecified XRUNTEST time */
+ xsvfGotoTapState( pucTapState, XTAPSTATE_RUNTEST );
+ XSVFDBG_PRINTF1( 3, " Wait = %ld usec\n", lRunTestTime );
+ waitTime( lRunTestTime );
+ }
+ }
+ } while ( iMismatch && ( ucRepeat++ < ucMaxRepeat ) );
+ }
+
+ if ( iMismatch )
+ {
+ XSVFDBG_PRINTF( 1, " TDO Expected = ");
+ XSVFDBG_PRINTLENVAL( 1, plvTdoExpected );
+ XSVFDBG_PRINTF( 1, "\n");
+ XSVFDBG_PRINTF( 1, " TDO Captured = ");
+ XSVFDBG_PRINTLENVAL( 1, plvTdoCaptured );
+ XSVFDBG_PRINTF( 1, "\n");
+ XSVFDBG_PRINTF( 1, " TDO Mask = ");
+ XSVFDBG_PRINTLENVAL( 1, plvTdoMask );
+ XSVFDBG_PRINTF( 1, "\n");
+ if ( ucMaxRepeat && ( ucRepeat > ucMaxRepeat ) )
+ {
+ iErrorCode = XSVF_ERROR_MAXRETRIES;
+ }
+ else
+ {
+ iErrorCode = XSVF_ERROR_TDOMISMATCH;
+ }
+ }
+
+ return( iErrorCode );
+}
+
+/*****************************************************************************
+ * Function: xsvfBasicXSDRTDO
+ * Description: Get the XSDRTDO parameters and execute the XSDRTDO command.
+ * This is the common function for all XSDRTDO commands.
+ * Parameters: pucTapState - Current TAP state.
+ * lShiftLengthBits - number of bits to shift.
+ * sShiftLengthBytes - number of bytes to read.
+ * plvTdi - ptr to lenval for TDI data.
+ * lvTdoCaptured - ptr to lenval for storing TDO data.
+ * iEndState - state in which to end the shift.
+ * lRunTestTime - amount of time to wait after the shift.
+ * ucMaxRepeat - maximum xc9500/xl retries.
+ * Returns: int - 0 = success; otherwise TDO mismatch.
+ *****************************************************************************/
+int xsvfBasicXSDRTDO( unsigned char* pucTapState,
+ long lShiftLengthBits,
+ short sShiftLengthBytes,
+ lenVal* plvTdi,
+ lenVal* plvTdoCaptured,
+ lenVal* plvTdoExpected,
+ lenVal* plvTdoMask,
+ unsigned char ucEndState,
+ long lRunTestTime,
+ unsigned char ucMaxRepeat )
+{
+ readVal( plvTdi, sShiftLengthBytes );
+ if ( plvTdoExpected )
+ {
+ readVal( plvTdoExpected, sShiftLengthBytes );
+ }
+ return( xsvfShift( pucTapState, XTAPSTATE_SHIFTDR, lShiftLengthBits,
+ plvTdi, plvTdoCaptured, plvTdoExpected, plvTdoMask,
+ ucEndState, lRunTestTime, ucMaxRepeat ) );
+}
+
+/*****************************************************************************
+ * Function: xsvfDoSDRMasking
+ * Description: Update the data value with the next XSDRINC data and address.
+ * Example: dataVal=0x01ff, nextData=0xab, addressMask=0x0100,
+ * dataMask=0x00ff, should set dataVal to 0x02ab
+ * Parameters: plvTdi - The current TDI value.
+ * plvNextData - the next data value.
+ * plvAddressMask - the address mask.
+ * plvDataMask - the data mask.
+ * Returns: void.
+ *****************************************************************************/
+#ifdef XSVF_SUPPORT_COMPRESSION
+void xsvfDoSDRMasking( lenVal* plvTdi,
+ lenVal* plvNextData,
+ lenVal* plvAddressMask,
+ lenVal* plvDataMask )
+{
+ int i;
+ unsigned char ucTdi;
+ unsigned char ucTdiMask;
+ unsigned char ucDataMask;
+ unsigned char ucNextData;
+ unsigned char ucNextMask;
+ short sNextData;
+
+ /* add the address Mask to dataVal and return as a new dataVal */
+ addVal( plvTdi, plvTdi, plvAddressMask );
+
+ ucNextData = 0;
+ ucNextMask = 0;
+ sNextData = plvNextData->len;
+ for ( i = plvDataMask->len - 1; i >= 0; --i )
+ {
+ /* Go through data mask in reverse order looking for mask (1) bits */
+ ucDataMask = plvDataMask->val[ i ];
+ if ( ucDataMask )
+ {
+ /* Retrieve the corresponding TDI byte value */
+ ucTdi = plvTdi->val[ i ];
+
+ /* For each bit in the data mask byte, look for 1's */
+ ucTdiMask = 1;
+ while ( ucDataMask )
+ {
+ if ( ucDataMask & 1 )
+ {
+ if ( !ucNextMask )
+ {
+ /* Get the next data byte */
+ ucNextData = plvNextData->val[ --sNextData ];
+ ucNextMask = 1;
+ }
+
+ /* Set or clear the data bit according to the next data */
+ if ( ucNextData & ucNextMask )
+ {
+ ucTdi |= ucTdiMask; /* Set bit */
+ }
+ else
+ {
+ ucTdi &= ( ~ucTdiMask ); /* Clear bit */
+ }
+
+ /* Update the next data */
+ ucNextMask <<= 1;
+ }
+ ucTdiMask <<= 1;
+ ucDataMask >>= 1;
+ }
+
+ /* Update the TDI value */
+ plvTdi->val[ i ] = ucTdi;
+ }
+ }
+}
+#endif /* XSVF_SUPPORT_COMPRESSION */
+
+/*============================================================================
+ * XSVF Command Functions (type = TXsvfDoCmdFuncPtr)
+ * These functions update pXsvfInfo->iErrorCode only on an error.
+ * Otherwise, the error code is left alone.
+ * The function returns the error code from the function.
+ ============================================================================*/
+
+/*****************************************************************************
+ * Function: xsvfDoIllegalCmd
+ * Description: Function place holder for illegal/unsupported commands.
+ * Parameters: pXsvfInfo - XSVF information pointer.
+ * Returns: int - 0 = success; non-zero = error.
+ *****************************************************************************/
+int xsvfDoIllegalCmd( SXsvfInfo* pXsvfInfo )
+{
+ XSVFDBG_PRINTF2( 0, "ERROR: Encountered unsupported command #%d (%s)\n",
+ ((unsigned int)(pXsvfInfo->ucCommand)),
+ ((pXsvfInfo->ucCommand < XLASTCMD)
+ ? (xsvf_pzCommandName[pXsvfInfo->ucCommand])
+ : "Unknown") );
+ pXsvfInfo->iErrorCode = XSVF_ERROR_ILLEGALCMD;
+ return( pXsvfInfo->iErrorCode );
+}
+
+/*****************************************************************************
+ * Function: xsvfDoXCOMPLETE
+ * Description: XCOMPLETE (no parameters)
+ * Update complete status for XSVF player.
+ * Parameters: pXsvfInfo - XSVF information pointer.
+ * Returns: int - 0 = success; non-zero = error.
+ *****************************************************************************/
+int xsvfDoXCOMPLETE( SXsvfInfo* pXsvfInfo )
+{
+ pXsvfInfo->ucComplete = 1;
+ return( XSVF_ERROR_NONE );
+}
+
+/*****************************************************************************
+ * Function: xsvfDoXTDOMASK
+ * Description: XTDOMASK <lenVal.TdoMask[XSDRSIZE]>
+ * Prespecify the TDO compare mask.
+ * Parameters: pXsvfInfo - XSVF information pointer.
+ * Returns: int - 0 = success; non-zero = error.
+ *****************************************************************************/
+int xsvfDoXTDOMASK( SXsvfInfo* pXsvfInfo )
+{
+ readVal( &(pXsvfInfo->lvTdoMask), pXsvfInfo->sShiftLengthBytes );
+ XSVFDBG_PRINTF( 4, " TDO Mask = ");
+ XSVFDBG_PRINTLENVAL( 4, &(pXsvfInfo->lvTdoMask) );
+ XSVFDBG_PRINTF( 4, "\n");
+ return( XSVF_ERROR_NONE );
+}
+
+/*****************************************************************************
+ * Function: xsvfDoXSIR
+ * Description: XSIR <(byte)shiftlen> <lenVal.TDI[shiftlen]>
+ * Get the instruction and shift the instruction into the TAP.
+ * If prespecified XRUNTEST!=0, goto RUNTEST and wait after
+ * the shift for XRUNTEST usec.
+ * Parameters: pXsvfInfo - XSVF information pointer.
+ * Returns: int - 0 = success; non-zero = error.
+ *****************************************************************************/
+int xsvfDoXSIR( SXsvfInfo* pXsvfInfo )
+{
+ unsigned char ucShiftIrBits;
+ short sShiftIrBytes;
+ int iErrorCode;
+
+ /* Get the shift length and store */
+ readByte( &ucShiftIrBits );
+ sShiftIrBytes = xsvfGetAsNumBytes( ucShiftIrBits );
+ XSVFDBG_PRINTF1( 3, " XSIR length = %d\n",
+ ((unsigned int)ucShiftIrBits) );
+
+ if ( sShiftIrBytes > MAX_LEN )
+ {
+ iErrorCode = XSVF_ERROR_DATAOVERFLOW;
+ }
+ else
+ {
+ /* Get and store instruction to shift in */
+ readVal( &(pXsvfInfo->lvTdi), xsvfGetAsNumBytes( ucShiftIrBits ) );
+
+ /* Shift the data */
+ iErrorCode = xsvfShift( &(pXsvfInfo->ucTapState), XTAPSTATE_SHIFTIR,
+ ucShiftIrBits, &(pXsvfInfo->lvTdi),
+ /*plvTdoCaptured*/0, /*plvTdoExpected*/0,
+ /*plvTdoMask*/0, pXsvfInfo->ucEndIR,
+ pXsvfInfo->lRunTestTime, /*ucMaxRepeat*/0 );
+ }
+
+ if ( iErrorCode != XSVF_ERROR_NONE )
+ {
+ pXsvfInfo->iErrorCode = iErrorCode;
+ }
+ return( iErrorCode );
+}
+
+/*****************************************************************************
+ * Function: xsvfDoXSIR2
+ * Description: XSIR <(2-byte)shiftlen> <lenVal.TDI[shiftlen]>
+ * Get the instruction and shift the instruction into the TAP.
+ * If prespecified XRUNTEST!=0, goto RUNTEST and wait after
+ * the shift for XRUNTEST usec.
+ * Parameters: pXsvfInfo - XSVF information pointer.
+ * Returns: int - 0 = success; non-zero = error.
+ *****************************************************************************/
+int xsvfDoXSIR2( SXsvfInfo* pXsvfInfo )
+{
+ long lShiftIrBits;
+ short sShiftIrBytes;
+ int iErrorCode;
+
+ /* Get the shift length and store */
+ readVal( &(pXsvfInfo->lvTdi), 2 );
+ lShiftIrBits = value( &(pXsvfInfo->lvTdi) );
+ sShiftIrBytes = xsvfGetAsNumBytes( lShiftIrBits );
+ XSVFDBG_PRINTF1( 3, " XSIR2 length = %d\n", (int)lShiftIrBits);
+
+ if ( sShiftIrBytes > MAX_LEN )
+ {
+ iErrorCode = XSVF_ERROR_DATAOVERFLOW;
+ }
+ else
+ {
+ /* Get and store instruction to shift in */
+ readVal( &(pXsvfInfo->lvTdi), xsvfGetAsNumBytes( lShiftIrBits ) );
+
+ /* Shift the data */
+ iErrorCode = xsvfShift( &(pXsvfInfo->ucTapState), XTAPSTATE_SHIFTIR,
+ lShiftIrBits, &(pXsvfInfo->lvTdi),
+ /*plvTdoCaptured*/0, /*plvTdoExpected*/0,
+ /*plvTdoMask*/0, pXsvfInfo->ucEndIR,
+ pXsvfInfo->lRunTestTime, /*ucMaxRepeat*/0 );
+ }
+
+ if ( iErrorCode != XSVF_ERROR_NONE )
+ {
+ pXsvfInfo->iErrorCode = iErrorCode;
+ }
+ return( iErrorCode );
+}
+
+/*****************************************************************************
+ * Function: xsvfDoXSDR
+ * Description: XSDR <lenVal.TDI[XSDRSIZE]>
+ * Shift the given TDI data into the JTAG scan chain.
+ * Compare the captured TDO with the expected TDO from the
+ * previous XSDRTDO command using the previously specified
+ * XTDOMASK.
+ * Parameters: pXsvfInfo - XSVF information pointer.
+ * Returns: int - 0 = success; non-zero = error.
+ *****************************************************************************/
+int xsvfDoXSDR( SXsvfInfo* pXsvfInfo )
+{
+ int iErrorCode;
+ readVal( &(pXsvfInfo->lvTdi), pXsvfInfo->sShiftLengthBytes );
+ /* use TDOExpected from last XSDRTDO instruction */
+ iErrorCode = xsvfShift( &(pXsvfInfo->ucTapState), XTAPSTATE_SHIFTDR,
+ pXsvfInfo->lShiftLengthBits, &(pXsvfInfo->lvTdi),
+ &(pXsvfInfo->lvTdoCaptured),
+ &(pXsvfInfo->lvTdoExpected),
+ &(pXsvfInfo->lvTdoMask), pXsvfInfo->ucEndDR,
+ pXsvfInfo->lRunTestTime, pXsvfInfo->ucMaxRepeat );
+ if ( iErrorCode != XSVF_ERROR_NONE )
+ {
+ pXsvfInfo->iErrorCode = iErrorCode;
+ }
+ return( iErrorCode );
+}
+
+/*****************************************************************************
+ * Function: xsvfDoXRUNTEST
+ * Description: XRUNTEST <uint32>
+ * Prespecify the XRUNTEST wait time for shift operations.
+ * Parameters: pXsvfInfo - XSVF information pointer.
+ * Returns: int - 0 = success; non-zero = error.
+ *****************************************************************************/
+int xsvfDoXRUNTEST( SXsvfInfo* pXsvfInfo )
+{
+ readVal( &(pXsvfInfo->lvTdi), 4 );
+ pXsvfInfo->lRunTestTime = value( &(pXsvfInfo->lvTdi) );
+ XSVFDBG_PRINTF1( 3, " XRUNTEST = %ld\n", pXsvfInfo->lRunTestTime );
+ return( XSVF_ERROR_NONE );
+}
+
+/*****************************************************************************
+ * Function: xsvfDoXREPEAT
+ * Description: XREPEAT <byte>
+ * Prespecify the maximum number of XC9500/XL retries.
+ * Parameters: pXsvfInfo - XSVF information pointer.
+ * Returns: int - 0 = success; non-zero = error.
+ *****************************************************************************/
+int xsvfDoXREPEAT( SXsvfInfo* pXsvfInfo )
+{
+ readByte( &(pXsvfInfo->ucMaxRepeat) );
+ XSVFDBG_PRINTF1( 3, " XREPEAT = %d\n",
+ ((unsigned int)(pXsvfInfo->ucMaxRepeat)) );
+ return( XSVF_ERROR_NONE );
+}
+
+/*****************************************************************************
+ * Function: xsvfDoXSDRSIZE
+ * Description: XSDRSIZE <uint32>
+ * Prespecify the XRUNTEST wait time for shift operations.
+ * Parameters: pXsvfInfo - XSVF information pointer.
+ * Returns: int - 0 = success; non-zero = error.
+ *****************************************************************************/
+int xsvfDoXSDRSIZE( SXsvfInfo* pXsvfInfo )
+{
+ int iErrorCode;
+ iErrorCode = XSVF_ERROR_NONE;
+ readVal( &(pXsvfInfo->lvTdi), 4 );
+ pXsvfInfo->lShiftLengthBits = value( &(pXsvfInfo->lvTdi) );
+ pXsvfInfo->sShiftLengthBytes= xsvfGetAsNumBytes( pXsvfInfo->lShiftLengthBits );
+ XSVFDBG_PRINTF1( 3, " XSDRSIZE = %ld\n", pXsvfInfo->lShiftLengthBits );
+ if ( pXsvfInfo->sShiftLengthBytes > MAX_LEN )
+ {
+ iErrorCode = XSVF_ERROR_DATAOVERFLOW;
+ pXsvfInfo->iErrorCode = iErrorCode;
+ }
+ return( iErrorCode );
+}
+
+/*****************************************************************************
+ * Function: xsvfDoXSDRTDO
+ * Description: XSDRTDO <lenVal.TDI[XSDRSIZE]> <lenVal.TDO[XSDRSIZE]>
+ * Get the TDI and expected TDO values. Then, shift.
+ * Compare the expected TDO with the captured TDO using the
+ * prespecified XTDOMASK.
+ * Parameters: pXsvfInfo - XSVF information pointer.
+ * Returns: int - 0 = success; non-zero = error.
+ *****************************************************************************/
+int xsvfDoXSDRTDO( SXsvfInfo* pXsvfInfo )
+{
+ int iErrorCode;
+ iErrorCode = xsvfBasicXSDRTDO( &(pXsvfInfo->ucTapState),
+ pXsvfInfo->lShiftLengthBits,
+ pXsvfInfo->sShiftLengthBytes,
+ &(pXsvfInfo->lvTdi),
+ &(pXsvfInfo->lvTdoCaptured),
+ &(pXsvfInfo->lvTdoExpected),
+ &(pXsvfInfo->lvTdoMask),
+ pXsvfInfo->ucEndDR,
+ pXsvfInfo->lRunTestTime,
+ pXsvfInfo->ucMaxRepeat );
+ if ( iErrorCode != XSVF_ERROR_NONE )
+ {
+ pXsvfInfo->iErrorCode = iErrorCode;
+ }
+ return( iErrorCode );
+}
+
+/*****************************************************************************
+ * Function: xsvfDoXSETSDRMASKS
+ * Description: XSETSDRMASKS <lenVal.AddressMask[XSDRSIZE]>
+ * <lenVal.DataMask[XSDRSIZE]>
+ * Get the prespecified address and data mask for the XSDRINC
+ * command.
+ * Used for xc9500/xl compressed XSVF data.
+ * Parameters: pXsvfInfo - XSVF information pointer.
+ * Returns: int - 0 = success; non-zero = error.
+ *****************************************************************************/
+#ifdef XSVF_SUPPORT_COMPRESSION
+int xsvfDoXSETSDRMASKS( SXsvfInfo* pXsvfInfo )
+{
+ /* read the addressMask */
+ readVal( &(pXsvfInfo->lvAddressMask), pXsvfInfo->sShiftLengthBytes );
+ /* read the dataMask */
+ readVal( &(pXsvfInfo->lvDataMask), pXsvfInfo->sShiftLengthBytes );
+
+ XSVFDBG_PRINTF( 4, " Address Mask = " );
+ XSVFDBG_PRINTLENVAL( 4, &(pXsvfInfo->lvAddressMask) );
+ XSVFDBG_PRINTF( 4, "\n" );
+ XSVFDBG_PRINTF( 4, " Data Mask = " );
+ XSVFDBG_PRINTLENVAL( 4, &(pXsvfInfo->lvDataMask) );
+ XSVFDBG_PRINTF( 4, "\n" );
+
+ return( XSVF_ERROR_NONE );
+}
+#endif /* XSVF_SUPPORT_COMPRESSION */
+
+/*****************************************************************************
+ * Function: xsvfDoXSDRINC
+ * Description: XSDRINC <lenVal.firstTDI[XSDRSIZE]> <byte(numTimes)>
+ * <lenVal.data[XSETSDRMASKS.dataMask.len]> ...
+ * Get the XSDRINC parameters and execute the XSDRINC command.
+ * XSDRINC starts by loading the first TDI shift value.
+ * Then, for numTimes, XSDRINC gets the next piece of data,
+ * replaces the bits from the starting TDI as defined by the
+ * XSETSDRMASKS.dataMask, adds the address mask from
+ * XSETSDRMASKS.addressMask, shifts the new TDI value,
+ * and compares the TDO to the expected TDO from the previous
+ * XSDRTDO command using the XTDOMASK.
+ * Used for xc9500/xl compressed XSVF data.
+ * Parameters: pXsvfInfo - XSVF information pointer.
+ * Returns: int - 0 = success; non-zero = error.
+ *****************************************************************************/
+#ifdef XSVF_SUPPORT_COMPRESSION
+int xsvfDoXSDRINC( SXsvfInfo* pXsvfInfo )
+{
+ int iErrorCode;
+ int iDataMaskLen;
+ unsigned char ucDataMask;
+ unsigned char ucNumTimes;
+ unsigned char i;
+
+ readVal( &(pXsvfInfo->lvTdi), pXsvfInfo->sShiftLengthBytes );
+ iErrorCode = xsvfShift( &(pXsvfInfo->ucTapState), XTAPSTATE_SHIFTDR,
+ pXsvfInfo->lShiftLengthBits,
+ &(pXsvfInfo->lvTdi), &(pXsvfInfo->lvTdoCaptured),
+ &(pXsvfInfo->lvTdoExpected),
+ &(pXsvfInfo->lvTdoMask), pXsvfInfo->ucEndDR,
+ pXsvfInfo->lRunTestTime, pXsvfInfo->ucMaxRepeat );
+ if ( !iErrorCode )
+ {
+ /* Calculate number of data mask bits */
+ iDataMaskLen = 0;
+ for ( i = 0; i < pXsvfInfo->lvDataMask.len; ++i )
+ {
+ ucDataMask = pXsvfInfo->lvDataMask.val[ i ];
+ while ( ucDataMask )
+ {
+ iDataMaskLen += ( ucDataMask & 1 );
+ ucDataMask >>= 1;
+ }
+ }
+
+ /* Get the number of data pieces, i.e. number of times to shift */
+ readByte( &ucNumTimes );
+
+ /* For numTimes, get data, fix TDI, and shift */
+ for ( i = 0; !iErrorCode && ( i < ucNumTimes ); ++i )
+ {
+ readVal( &(pXsvfInfo->lvNextData),
+ xsvfGetAsNumBytes( iDataMaskLen ) );
+ xsvfDoSDRMasking( &(pXsvfInfo->lvTdi),
+ &(pXsvfInfo->lvNextData),
+ &(pXsvfInfo->lvAddressMask),
+ &(pXsvfInfo->lvDataMask) );
+ iErrorCode = xsvfShift( &(pXsvfInfo->ucTapState),
+ XTAPSTATE_SHIFTDR,
+ pXsvfInfo->lShiftLengthBits,
+ &(pXsvfInfo->lvTdi),
+ &(pXsvfInfo->lvTdoCaptured),
+ &(pXsvfInfo->lvTdoExpected),
+ &(pXsvfInfo->lvTdoMask),
+ pXsvfInfo->ucEndDR,
+ pXsvfInfo->lRunTestTime,
+ pXsvfInfo->ucMaxRepeat );
+ }
+ }
+ if ( iErrorCode != XSVF_ERROR_NONE )
+ {
+ pXsvfInfo->iErrorCode = iErrorCode;
+ }
+ return( iErrorCode );
+}
+#endif /* XSVF_SUPPORT_COMPRESSION */
+
+/*****************************************************************************
+ * Function: xsvfDoXSDRBCE
+ * Description: XSDRB/XSDRC/XSDRE <lenVal.TDI[XSDRSIZE]>
+ * If not already in SHIFTDR, goto SHIFTDR.
+ * Shift the given TDI data into the JTAG scan chain.
+ * Ignore TDO.
+ * If cmd==XSDRE, then goto ENDDR. Otherwise, stay in ShiftDR.
+ * XSDRB, XSDRC, and XSDRE are the same implementation.
+ * Parameters: pXsvfInfo - XSVF information pointer.
+ * Returns: int - 0 = success; non-zero = error.
+ *****************************************************************************/
+int xsvfDoXSDRBCE( SXsvfInfo* pXsvfInfo )
+{
+ unsigned char ucEndDR;
+ int iErrorCode;
+ ucEndDR = (unsigned char)(( pXsvfInfo->ucCommand == XSDRE ) ?
+ pXsvfInfo->ucEndDR : XTAPSTATE_SHIFTDR);
+ iErrorCode = xsvfBasicXSDRTDO( &(pXsvfInfo->ucTapState),
+ pXsvfInfo->lShiftLengthBits,
+ pXsvfInfo->sShiftLengthBytes,
+ &(pXsvfInfo->lvTdi),
+ /*plvTdoCaptured*/0, /*plvTdoExpected*/0,
+ /*plvTdoMask*/0, ucEndDR,
+ /*lRunTestTime*/0, /*ucMaxRepeat*/0 );
+ if ( iErrorCode != XSVF_ERROR_NONE )
+ {
+ pXsvfInfo->iErrorCode = iErrorCode;
+ }
+ return( iErrorCode );
+}
+
+/*****************************************************************************
+ * Function: xsvfDoXSDRTDOBCE
+ * Description: XSDRB/XSDRC/XSDRE <lenVal.TDI[XSDRSIZE]> <lenVal.TDO[XSDRSIZE]>
+ * If not already in SHIFTDR, goto SHIFTDR.
+ * Shift the given TDI data into the JTAG scan chain.
+ * Compare TDO, but do NOT use XTDOMASK.
+ * If cmd==XSDRTDOE, then goto ENDDR. Otherwise, stay in ShiftDR.
+ * XSDRTDOB, XSDRTDOC, and XSDRTDOE are the same implementation.
+ * Parameters: pXsvfInfo - XSVF information pointer.
+ * Returns: int - 0 = success; non-zero = error.
+ *****************************************************************************/
+int xsvfDoXSDRTDOBCE( SXsvfInfo* pXsvfInfo )
+{
+ unsigned char ucEndDR;
+ int iErrorCode;
+ ucEndDR = (unsigned char)(( pXsvfInfo->ucCommand == XSDRTDOE ) ?
+ pXsvfInfo->ucEndDR : XTAPSTATE_SHIFTDR);
+ iErrorCode = xsvfBasicXSDRTDO( &(pXsvfInfo->ucTapState),
+ pXsvfInfo->lShiftLengthBits,
+ pXsvfInfo->sShiftLengthBytes,
+ &(pXsvfInfo->lvTdi),
+ &(pXsvfInfo->lvTdoCaptured),
+ &(pXsvfInfo->lvTdoExpected),
+ /*plvTdoMask*/0, ucEndDR,
+ /*lRunTestTime*/0, /*ucMaxRepeat*/0 );
+ if ( iErrorCode != XSVF_ERROR_NONE )
+ {
+ pXsvfInfo->iErrorCode = iErrorCode;
+ }
+ return( iErrorCode );
+}
+
+/*****************************************************************************
+ * Function: xsvfDoXSTATE
+ * Description: XSTATE <byte>
+ * <byte> == XTAPSTATE;
+ * Get the state parameter and transition the TAP to that state.
+ * Parameters: pXsvfInfo - XSVF information pointer.
+ * Returns: int - 0 = success; non-zero = error.
+ *****************************************************************************/
+int xsvfDoXSTATE( SXsvfInfo* pXsvfInfo )
+{
+ unsigned char ucNextState;
+ int iErrorCode;
+ readByte( &ucNextState );
+ iErrorCode = xsvfGotoTapState( &(pXsvfInfo->ucTapState), ucNextState );
+ if ( iErrorCode != XSVF_ERROR_NONE )
+ {
+ pXsvfInfo->iErrorCode = iErrorCode;
+ }
+ return( iErrorCode );
+}
+
+/*****************************************************************************
+ * Function: xsvfDoXENDXR
+ * Description: XENDIR/XENDDR <byte>
+ * <byte>: 0 = RUNTEST; 1 = PAUSE.
+ * Get the prespecified XENDIR or XENDDR.
+ * Both XENDIR and XENDDR use the same implementation.
+ * Parameters: pXsvfInfo - XSVF information pointer.
+ * Returns: int - 0 = success; non-zero = error.
+ *****************************************************************************/
+int xsvfDoXENDXR( SXsvfInfo* pXsvfInfo )
+{
+ int iErrorCode;
+ unsigned char ucEndState;
+
+ iErrorCode = XSVF_ERROR_NONE;
+ readByte( &ucEndState );
+ if ( ( ucEndState != XENDXR_RUNTEST ) && ( ucEndState != XENDXR_PAUSE ) )
+ {
+ iErrorCode = XSVF_ERROR_ILLEGALSTATE;
+ }
+ else
+ {
+
+ if ( pXsvfInfo->ucCommand == XENDIR )
+ {
+ if ( ucEndState == XENDXR_RUNTEST )
+ {
+ pXsvfInfo->ucEndIR = XTAPSTATE_RUNTEST;
+ }
+ else
+ {
+ pXsvfInfo->ucEndIR = XTAPSTATE_PAUSEIR;
+ }
+ XSVFDBG_PRINTF1( 3, " ENDIR State = %s\n",
+ xsvf_pzTapState[ pXsvfInfo->ucEndIR ] );
+ }
+ else /* XENDDR */
+ {
+ if ( ucEndState == XENDXR_RUNTEST )
+ {
+ pXsvfInfo->ucEndDR = XTAPSTATE_RUNTEST;
+ }
+ else
+ {
+ pXsvfInfo->ucEndDR = XTAPSTATE_PAUSEDR;
+ }
+ XSVFDBG_PRINTF1( 3, " ENDDR State = %s\n",
+ xsvf_pzTapState[ pXsvfInfo->ucEndDR ] );
+ }
+ }
+
+ if ( iErrorCode != XSVF_ERROR_NONE )
+ {
+ pXsvfInfo->iErrorCode = iErrorCode;
+ }
+ return( iErrorCode );
+}
+
+/*****************************************************************************
+ * Function: xsvfDoXCOMMENT
+ * Description: XCOMMENT <text string ending in \0>
+ * <text string ending in \0> == text comment;
+ * Arbitrary comment embedded in the XSVF.
+ * Parameters: pXsvfInfo - XSVF information pointer.
+ * Returns: int - 0 = success; non-zero = error.
+ *****************************************************************************/
+int xsvfDoXCOMMENT( SXsvfInfo* pXsvfInfo )
+{
+ /* Use the comment for debugging */
+ /* Otherwise, read through the comment to the end '\0' and ignore */
+ unsigned char ucText;
+
+ if ( xsvf_iDebugLevel > 0 )
+ {
+ putc( ' ' );
+ }
+
+ do
+ {
+ readByte( &ucText );
+ if ( xsvf_iDebugLevel > 0 )
+ {
+ putc( ucText ? ucText : '\n' );
+ }
+ } while ( ucText );
+
+ pXsvfInfo->iErrorCode = XSVF_ERROR_NONE;
+
+ return( pXsvfInfo->iErrorCode );
+}
+
+/*****************************************************************************
+ * Function: xsvfDoXWAIT
+ * Description: XWAIT <wait_state> <end_state> <wait_time>
+ * If not already in <wait_state>, then go to <wait_state>.
+ * Wait in <wait_state> for <wait_time> microseconds.
+ * Finally, if not already in <end_state>, then goto <end_state>.
+ * Parameters: pXsvfInfo - XSVF information pointer.
+ * Returns: int - 0 = success; non-zero = error.
+ *****************************************************************************/
+int xsvfDoXWAIT( SXsvfInfo* pXsvfInfo )
+{
+ unsigned char ucWaitState;
+ unsigned char ucEndState;
+ long lWaitTime;
+
+ /* Get Parameters */
+ /* <wait_state> */
+ readVal( &(pXsvfInfo->lvTdi), 1 );
+ ucWaitState = pXsvfInfo->lvTdi.val[0];
+
+ /* <end_state> */
+ readVal( &(pXsvfInfo->lvTdi), 1 );
+ ucEndState = pXsvfInfo->lvTdi.val[0];
+
+ /* <wait_time> */
+ readVal( &(pXsvfInfo->lvTdi), 4 );
+ lWaitTime = value( &(pXsvfInfo->lvTdi) );
+ XSVFDBG_PRINTF2( 3, " XWAIT: state = %s; time = %ld\n",
+ xsvf_pzTapState[ ucWaitState ], lWaitTime );
+
+ /* If not already in <wait_state>, go to <wait_state> */
+ if ( pXsvfInfo->ucTapState != ucWaitState )
+ {
+ xsvfGotoTapState( &(pXsvfInfo->ucTapState), ucWaitState );
+ }
+
+ /* Wait for <wait_time> microseconds */
+ waitTime( lWaitTime );
+
+ /* If not already in <end_state>, go to <end_state> */
+ if ( pXsvfInfo->ucTapState != ucEndState )
+ {
+ xsvfGotoTapState( &(pXsvfInfo->ucTapState), ucEndState );
+ }
+
+ return( XSVF_ERROR_NONE );
+}
+
+
+/*============================================================================
+ * Execution Control Functions
+ ============================================================================*/
+
+/*****************************************************************************
+ * Function: xsvfInitialize
+ * Description: Initialize the xsvf player.
+ * Call this before running the player to initialize the data
+ * in the SXsvfInfo struct.
+ * xsvfCleanup is called to clean up the data in SXsvfInfo
+ * after the XSVF is played.
+ * Parameters: pXsvfInfo - ptr to the XSVF information.
+ * Returns: int - 0 = success; otherwise error.
+ *****************************************************************************/
+int xsvfInitialize( SXsvfInfo* pXsvfInfo )
+{
+ /* Initialize values */
+ pXsvfInfo->iErrorCode = xsvfInfoInit( pXsvfInfo );
+
+ if ( !pXsvfInfo->iErrorCode )
+ {
+ /* Initialize the TAPs */
+ pXsvfInfo->iErrorCode = xsvfGotoTapState( &(pXsvfInfo->ucTapState),
+ XTAPSTATE_RESET );
+ }
+
+ return( pXsvfInfo->iErrorCode );
+}
+
+/*****************************************************************************
+ * Function: xsvfRun
+ * Description: Run the xsvf player for a single command and return.
+ * First, call xsvfInitialize.
+ * Then, repeatedly call this function until an error is detected
+ * or until the pXsvfInfo->ucComplete variable is non-zero.
+ * Finally, call xsvfCleanup to cleanup any remnants.
+ * Parameters: pXsvfInfo - ptr to the XSVF information.
+ * Returns: int - 0 = success; otherwise error.
+ *****************************************************************************/
+int xsvfRun( SXsvfInfo* pXsvfInfo )
+{
+ /* Process the XSVF commands */
+ if ( (!pXsvfInfo->iErrorCode) && (!pXsvfInfo->ucComplete) )
+ {
+ /* read 1 byte for the instruction */
+ readByte( &(pXsvfInfo->ucCommand) );
+ ++(pXsvfInfo->lCommandCount);
+
+ if ( pXsvfInfo->ucCommand < XLASTCMD )
+ {
+ /* Execute the command. Func sets error code. */
+ XSVFDBG_PRINTF1( 2, " %s\n",
+ xsvf_pzCommandName[pXsvfInfo->ucCommand] );
+ /* If your compiler cannot take this form,
+ then convert to a switch statement */
+#if 0 /* test-only */
+ xsvf_pfDoCmd[ pXsvfInfo->ucCommand ]( pXsvfInfo );
+#else
+ switch (pXsvfInfo->ucCommand) {
+ case 0:
+ xsvfDoXCOMPLETE(pXsvfInfo); /* 0 */
+ break;
+ case 1:
+ xsvfDoXTDOMASK(pXsvfInfo); /* 1 */
+ break;
+ case 2:
+ xsvfDoXSIR(pXsvfInfo); /* 2 */
+ break;
+ case 3:
+ xsvfDoXSDR(pXsvfInfo); /* 3 */
+ break;
+ case 4:
+ xsvfDoXRUNTEST(pXsvfInfo); /* 4 */
+ break;
+ case 5:
+ xsvfDoIllegalCmd(pXsvfInfo); /* 5 */
+ break;
+ case 6:
+ xsvfDoIllegalCmd(pXsvfInfo); /* 6 */
+ break;
+ case 7:
+ xsvfDoXREPEAT(pXsvfInfo); /* 7 */
+ break;
+ case 8:
+ xsvfDoXSDRSIZE(pXsvfInfo); /* 8 */
+ break;
+ case 9:
+ xsvfDoXSDRTDO(pXsvfInfo); /* 9 */
+ break;
+#ifdef XSVF_SUPPORT_COMPRESSION
+ case 10:
+ xsvfDoXSETSDRMASKS(pXsvfInfo); /* 10 */
+ break;
+ case 11:
+ xsvfDoXSDRINC(pXsvfInfo); /* 11 */
+ break;
+#else
+ case 10:
+ xsvfDoIllegalCmd(pXsvfInfo); /* 10 */
+ break;
+ case 11:
+ xsvfDoIllegalCmd(pXsvfInfo); /* 11 */
+ break;
+#endif /* XSVF_SUPPORT_COMPRESSION */
+ case 12:
+ xsvfDoXSDRBCE(pXsvfInfo); /* 12 */
+ break;
+ case 13:
+ xsvfDoXSDRBCE(pXsvfInfo); /* 13 */
+ break;
+ case 14:
+ xsvfDoXSDRBCE(pXsvfInfo); /* 14 */
+ break;
+ case 15:
+ xsvfDoXSDRTDOBCE(pXsvfInfo); /* 15 */
+ break;
+ case 16:
+ xsvfDoXSDRTDOBCE(pXsvfInfo); /* 16 */
+ break;
+ case 17:
+ xsvfDoXSDRTDOBCE(pXsvfInfo); /* 17 */
+ break;
+ case 18:
+ xsvfDoXSTATE(pXsvfInfo); /* 18 */
+ break;
+ case 19:
+ xsvfDoXENDXR(pXsvfInfo); /* 19 */
+ break;
+ case 20:
+ xsvfDoXENDXR(pXsvfInfo); /* 20 */
+ break;
+ case 21:
+ xsvfDoXSIR2(pXsvfInfo); /* 21 */
+ break;
+ case 22:
+ xsvfDoXCOMMENT(pXsvfInfo); /* 22 */
+ break;
+ case 23:
+ xsvfDoXWAIT(pXsvfInfo); /* 23 */
+ break;
+ }
+#endif
+ }
+ else
+ {
+ /* Illegal command value. Func sets error code. */
+ xsvfDoIllegalCmd( pXsvfInfo );
+ }
+ }
+
+ return( pXsvfInfo->iErrorCode );
+}
+
+/*****************************************************************************
+ * Function: xsvfCleanup
+ * Description: cleanup remnants of the xsvf player.
+ * Parameters: pXsvfInfo - ptr to the XSVF information.
+ * Returns: void.
+ *****************************************************************************/
+void xsvfCleanup( SXsvfInfo* pXsvfInfo )
+{
+ xsvfInfoCleanup( pXsvfInfo );
+}
+
+
+/*============================================================================
+ * xsvfExecute() - The primary entry point to the XSVF player
+ ============================================================================*/
+
+/*****************************************************************************
+ * Function: xsvfExecute
+ * Description: Process, interpret, and apply the XSVF commands.
+ * See port.c:readByte for source of XSVF data.
+ * Parameters: none.
+ * Returns: int - Legacy result values: 1 == success; 0 == failed.
+ *****************************************************************************/
+int xsvfExecute(void)
+{
+ SXsvfInfo xsvfInfo;
+
+ xsvfInitialize( &xsvfInfo );
+
+ while ( !xsvfInfo.iErrorCode && (!xsvfInfo.ucComplete) )
+ {
+ xsvfRun( &xsvfInfo );
+ }
+
+ if ( xsvfInfo.iErrorCode )
+ {
+ XSVFDBG_PRINTF1( 0, "%s\n", xsvf_pzErrorName[
+ ( xsvfInfo.iErrorCode < XSVF_ERROR_LAST )
+ ? xsvfInfo.iErrorCode : XSVF_ERROR_UNKNOWN ] );
+ XSVFDBG_PRINTF2( 0, "ERROR at or near XSVF command #%ld. See line #%ld in the XSVF ASCII file.\n",
+ xsvfInfo.lCommandCount, xsvfInfo.lCommandCount );
+ }
+ else
+ {
+ XSVFDBG_PRINTF( 0, "SUCCESS - Completed XSVF execution.\n" );
+ }
+
+ xsvfCleanup( &xsvfInfo );
+
+ return( XSVF_ERRORCODE(xsvfInfo.iErrorCode) );
+}
+
+
+/*****************************************************************************
+ * Function: do_cpld
+ * Description: main function.
+ * Specified here for creating stand-alone debug executable.
+ * Embedded users should call xsvfExecute() directly.
+ * Parameters: iArgc - number of command-line arguments.
+ * ppzArgv - array of ptrs to strings (command-line arguments).
+ * Returns: int - Legacy return value: 1 = success; 0 = error.
+ *****************************************************************************/
+int do_cpld(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ int iErrorCode;
+ char* pzXsvfFileName;
+ unsigned long duration;
+ unsigned long long startClock, endClock;
+
+ iErrorCode = XSVF_ERRORCODE( XSVF_ERROR_NONE );
+ pzXsvfFileName = 0;
+ xsvf_iDebugLevel = 0;
+
+ printf("XSVF Player v%s, Xilinx, Inc.\n", XSVF_VERSION);
+ printf("XSVF Filesize = %d bytes\n", filesize);
+
+ /* Initialize the I/O. SetPort initializes I/O on first call */
+ setPort( TMS, 1 );
+
+ /* Execute the XSVF in the file */
+ startClock = get_ticks();
+ iErrorCode = xsvfExecute();
+ endClock = get_ticks();
+ duration = (unsigned long)(endClock - startClock);
+ printf("\nExecution Time = %d seconds\n", (int)(duration/get_tbclk()));
+
+ return( iErrorCode );
+}
+U_BOOT_CMD(
+ cpld, 1, 1, do_cpld,
+ "cpld - Program onboard CPLD\n",
+ NULL
+ );
projects / project / bcm63xx / u-boot.git / commitdiff