It should be implemmented in a cleaner way.
This reverts the following commits:
[ar71xx] dir-825-b1: Fix wholeflash images
[ar71xx] dir825b1: Add image for DIR-825-B1 that uses the whole flash"
SVN-Revision: 33459
dir-615-c1)
status_led="d-link:green:status"
;;
- dir-825-b1 |\
- dir-825-b1-towholeflash |\
- dir-825-b1-wholeflash |\
- dir-825-b1-stock)
+ dir-825-b1)
status_led="d-link:orange:power"
;;
eap7660d)
+++ /dev/null
-#!/bin/sh
-#
-# Copyright (C) 2011 OpenWrt.org
-#
-
-. /lib/functions/uci-defaults.sh
-. /lib/ar71xx.sh
-
-board=$(ar71xx_board_name)
-
-findmtd() {
- local partname="$1"
- grep "\"$partname\"" /proc/mtd | awk -F: '{ print $1 }'
-}
-
-getcalmac() {
- local partname="$1"
- local offset="$2"
-
- hexdump -e '17/1 "%c"' -s $offset -n 17 /dev/$(findmtd $partname) | tr -d : | tr 'A-Z' 'a-z'
-}
-
-calcmacX() {
- local mac="$1"
- local X="$2"
-
- local oui="$(expr substr "$mac" 1 6)"
- local end="$(expr substr "$mac" 7 12)"
-
- echo -n $oui
- expr substr "$(printf "%6lx" "$(($(printf "%lu" 0x${end}) + $X))")" 1 6
-}
-
-getifmac() {
- local ifname="$1"
-
- local ifmac
-
- ifmac="$(ifconfig "$ifname" | grep HWaddr)"
- ifmac="${ifmac#*HWaddr }"
- ifmac="${ifmac%% *}"
-
- echo "$ifmac" | tr -d : | tr 'A-Z' 'a-z'
-}
-
-case "$board" in
-dir-825-b1-towholeflash)
- mac1="$(getcalmac caldata 65440)"
- mac1="$(calcmacX "$mac1" 2)"
- mac2="$(calcmacX "$mac1" 1)"
-
- if grep -q '"owrt_caldata"' /proc/mtd && [ "$mac1" = "$(getifmac eth0)" ] && [ "$mac2" = "$(getifmac eth1)" ]; then
- mtd erase owrt_caldata
- dd if=/dev/$(findmtd caldata) of=/dev/$(findmtd owrt_caldata) bs=65536 count=1
- fi
- ;;
-dir-825-b1-tostock)
- mac1="$(getcalmac owrt_caldata 65440)"
- mac1="$(calcmacX "$mac1" 2)"
- mac2="$(calcmacX "$mac1" 1)"
- if grep -q '"owrt_caldata"' /proc/mtd && [ "$mac1" = "$(getifmac eth0)" ] && [ "$mac2" = "$(getifmac eth1)" ]; then
- mtd erase caldata
- dd if=/dev/$(findmtd owrt_caldata) of=/dev/$(findmtd caldata) bs=65536 count=1
- fi
- ;;
-esac
-
-return 0
ucidef_set_led_switch "lan4" "LAN4" "d-link:green:lan4" "switch0" "0x10"
;;
-dir-825-b1|\
-dir-825-b1-towholeflash|\
-dir-825-b1-wholeflash|\
-dir-825-b1-tostock)
+dir-825-b1)
ucidef_set_led_usbdev "usb" "USB" "d-link:blue:usb" "1-1"
;;
;;
dir-825-b1|\
-dir-825-b1-towholeflash|\
-dir-825-b1-wholeflash|\
-dir-825-b1-tostock|\
tew-673gru)
ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
ucidef_add_switch "rtl8366s" "1" "1"
*"DIR-825 rev. B1")
name="dir-825-b1"
;;
- *"DIR-825 rev. B1 WHOLEFLASH")
- name="dir-825-b1-wholeflash"
- ;;
- *"DIR-825 rev. B1 TOWHOLEFLASH")
- name="dir-825-b1-towholeflash"
- ;;
- *"DIR-825 rev. B1 TOSTOCK")
- name="dir-825-b1-tostock"
- ;;
*EAP7660D)
name="eap7660d"
;;
dir-615-c1 | \
dir-615-e4 | \
dir-825-b1 | \
- dir-825-b1-towholeflash | \
- dir-825-b1-wholeflash | \
- dir-825-b1-tostock | \
ew-dorin | \
ew-dorin-router | \
mzk-w04nu | \
$(eval $(call Profile,DIR615E4))
-define Profile/DIR825B1_ALL
- NAME:=D-Link DIR-825 rev. B1 - all flavours
- PACKAGES:=kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ledtrig-usbdev
-endef
-
-define Profile/DIR825B1_ALL/Description
- Build all D-Link DIR-825 rev. B1 images
-endef
-
-$(eval $(call Profile,DIR825B1_ALL))
define Profile/DIR825B1
NAME:=D-Link DIR-825 rev. B1
define Profile/DIR825B1/Description
Package set optimized for the D-Link DIR-825 rev. B1.
- WARNING: Flashing wholeflash (openwrt optimized) image may brick your router
- . This will occur if your openwrt optimized image is larger than the
- maximum size for a regular dir-825 b1 image (a little more than 6MB).
- Please flash a TOWHOLEFLASH image instead of this image before flashing
-a
- WHOLEFLASH image.
endef
$(eval $(call Profile,DIR825B1))
-
-define Profile/DIR825B1_TOWHOLEFLASH
- NAME:=D-Link DIR-825 rev. B1 designed for transition to image using whole flash
- PACKAGES:=kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ledtrig-usbdev
-endef
-
-define Profile/DIR825B1_TOWHOLEFLASH/Description
- Package set optimized for the D-Link DIR-825 rev. B1. design for transtion to
- image using whole flash.
- Copies the calibration data to the last erase block so that, if desired,
- an image optimized for use with OpenWrt (access to full flash) can be flashed.
-endef
-
-$(eval $(call Profile,DIR825B1_TOWHOLEFLASH))
-
-define Profile/DIR825B1_WHOLEFLASH
- NAME:=D-Link DIR-825 rev. B1 optimized for OpenWrt which uses full 8M flash
- PACKAGES:=kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ledtrig-usbdev
-endef
-
-define Profile/DIR825B1_WHOLEFLASH/Description
- Package set optimized for the D-Link DIR-825 rev. B1. using wholeflash
- Can only be flashed from OpenWrt because it requires that the calibration data
- be on the last sector of the flash (which the 'standard' version that can be flashed from
- stock will ensure).
-endef
-
-$(eval $(call Profile,DIR825B1_WHOLEFLASH))
-
-define Profile/DIR825B1_TOSTOCK
- NAME:=D-Link DIR-825 rev. B1 that undoes OpenWrt optimization (i.e. wholeflash)
- PACKAGES:=kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ledtrig-usbdev
-endef
-
-define Profile/DIR825B1_TOSTOCK/Description
- Package set optimized for the D-Link DIR-825 rev. B1. that undoes OpenWrt optimization
- Copies the calibration data from the last erase block to the erase block normally used
- by the stock firmware for said data.
-endef
-
-$(eval $(call Profile,DIR825B1_TOSTOCK))
-
cameo933x_mtdlayout=mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k(nvram)ro,192k(language)ro,896k(kernel),2752k(rootfs),3648k@0x70000(firmware)
db120_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware)
dir825b1_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,1024k(kernel),5184k(rootfs),64k(caldata)ro,1600k(unknown)ro,6208k@0x50000(firmware)
-dir825b1_towholeflash_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,1024k(kernel),5184k(rootfs),64k(caldata)ro,1536k(unknown)ro,64k(owrt_caldata),7808k@0x50000(firmware)
-dir825b1_wholeflash_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,1024k(kernel),6784k(rootfs),64k(caldata)ro,7808k@0x50000(firmware)
ew-dorin_mtdlayout_4M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),1024k(kernel),2688k(rootfs),64k(art),3712k@0x50000(firmware)
-dir825b1_tostock_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,1024k(kernel),5184k(rootfs),64k(caldata),1536k(unknown)ro,64k(owrt_caldata)ro,6208k@0x50000(firmware)
pb92_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,2752k(rootfs),896k(kernel),64k(nvram),64k(art)ro,3648k@0x50000(firmware)
planex_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,960k(kernel),6784k(rootfs),128k(art)ro,7744k@0x50000(firmware)
ubntxm_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1024k(kernel),6528k(rootfs),256k(cfg)ro,64k(EEPROM)ro,7552k@0x50000(firmware)
fi
endef
-define Image/Build/DIR825B1_TOWHOLEFLASH
- $(call MkuImageLzma,$(2),$(3) $(dir825b1_towholeflash_mtdlayout))
- $(call Sysupgrade/KRuImage,$(1),$(2),1048576,5308416)
- if [ -e "$(call sysupname,$(1),$(2))" ]; then \
- ( \
- dd if=$(call sysupname,$(1),$(2)); \
- echo -n "$(4)"; \
- ) > $(call imgname,$(1),$(2))-backup-loader.bin; \
- if [ `stat -c%s $(call sysupname,$(1),$(2))` -gt 4194304 ]; then \
- echo "Warning: $(call sysupname,$(1),$(2)) is too big"; \
- else \
- ( \
- dd if=$(call sysupname,$(1),$(2)) bs=4096k conv=sync; \
- echo -n "$(5)"; \
- ) > $(call factoryname,$(1),$(2)); \
- fi; \
- fi
-endef
-
-define Image/Build/DIR825B1_WHOLEFLASH
- $(call MkuImageLzma,$(2),$(3) $(dir825b1_wholeflash_mtdlayout))
- $(call Sysupgrade/KRuImage,$(1),$(2),1048576,6946816)
-endef
-
-define Image/Build/DIR825B1_TOSTOCK
- $(call MkuImageLzma,$(2),$(3) $(dir825b1_tostock_mtdlayout))
- $(call Sysupgrade/KRuImage,$(1),$(2),1048576,5308416)
-endef
-
define Image/Build/WZRHPG30XNH
$(call MkuImageLzma,$(2),$(3))
$(call Sysupgrade/KRuImage,$(1),$(2),1048576,31850496)
$(eval $(call SingleProfile,CyberTAN,$(fs_64k),WRT160NL,wrt160nl,WRT160NL,ttyS0,115200,1.00.01))
$(eval $(call SingleProfile,DIR825B1,$(fs_64k),DIR825B1,dir-825-b1,DIR-825-B1,ttyS0,115200,01AP94-AR7161-RT-080619-00,00AP94-AR7161-RT-080619-00))
-$(eval $(call SingleProfile,DIR825B1_TOWHOLEFLASH,$(fs_64k),DIR825B1_TOWHOLEFLASH,dir-825-b1-towholeflash,DIR-825-B1_TOWHOLEFLASH,ttyS0,115200,01AP94-AR7161-RT-080619-00,00AP94-AR7161-RT-080619-00))
-$(eval $(call SingleProfile,DIR825B1_WHOLEFLASH,$(fs_64k),DIR825B1_WHOLEFLASH,dir-825-b1-wholeflash,DIR-825-B1_WHOLEFLASH,ttyS0,115200,01AP94-AR7161-RT-080619-00,00AP94-AR7161-RT-080619-00))
-$(eval $(call SingleProfile,DIR825B1_TOSTOCK,$(fs_64k),DIR825B1_TOSTOCK,dir-825-b1-tostock,DIR-825-B1_TOSTOCK,ttyS0,115200,01AP94-AR7161-RT-080619-00,00AP94-AR7161-RT-080619-00))
$(eval $(call SingleProfile,DIR825B1,$(fs_64k),TEW673GRU,tew-637gru,TEW-673GRU,ttyS0,115200,01AP94-AR7161-RT-080619-01,00AP94-AR7161-RT-080619-01))
$(eval $(call SingleProfile,MyLoader,$(fs_64k),WP543_2M,wp543,,ttyS0,115200,0x200000,2M))
$(eval $(call MultiProfile,AP121,AP121_2M AP121_4M))
-$(eval $(call MultiProfile,DIR825B1_ALL,DIR825B1 DIR825B1_TOWHOLEFLASH DIR825B1_WHOLEFLASH DIR825B1_TOSTOCK))
$(eval $(call MultiProfile,EWDORIN, EWDORINAP EWDORINRT))
$(eval $(call MultiProfile,TEW652BRP,TEW652BRP_FW TEW652BRP_RECOVERY))
$(eval $(call MultiProfile,TLWA901,TLWA901NV1 TLWA901NV2))
+++ /dev/null
---- a/arch/mips/ath79/mach-dir-825-b1.c
-+++ b/arch/mips/ath79/mach-dir-825-b1.c
-@@ -46,6 +46,12 @@
- #define DIR825B1_MAC_LOCATION_0 0x1f66ffa0
- #define DIR825B1_MAC_LOCATION_1 0x1f66ffb4
-
-+#define DIR825B1_WHOLEFLASH_CAL_LOCATION_0 0x1f7f1000
-+#define DIR825B1_WHOLEFLASH_CAL_LOCATION_1 0x1f7f5000
-+
-+#define DIR825B1_WHOLEFLASH_MAC_LOCATION_0 0x1f7fffa0
-+#define DIR825B1_WHOLEFLASH_MAC_LOCATION_1 0x1f7fffb4
-+
- static struct gpio_led dir825b1_leds_gpio[] __initdata = {
- {
- .name = "d-link:blue:usb",
-@@ -124,12 +130,12 @@ static void dir825b1_read_ascii_mac(u8 *
- memset(dest, 0, ETH_ALEN);
- }
-
--static void __init dir825b1_setup(void)
--{
-+static void __init dir825b1_common_setup(unsigned int macloc1, unsigned int macloc2,
-+ unsigned int calloc1, unsigned int calloc2) {
- u8 mac1[ETH_ALEN], mac2[ETH_ALEN];
-
-- dir825b1_read_ascii_mac(mac1, DIR825B1_MAC_LOCATION_0);
-- dir825b1_read_ascii_mac(mac2, DIR825B1_MAC_LOCATION_1);
-+ dir825b1_read_ascii_mac(mac1, macloc1);
-+ dir825b1_read_ascii_mac(mac2, macloc2);
-
- ath79_register_mdio(0, 0x0);
-
-@@ -165,9 +171,30 @@ static void __init dir825b1_setup(void)
- ap9x_pci_setup_wmac_led_pin(0, 5);
- ap9x_pci_setup_wmac_led_pin(1, 5);
-
-- ap94_pci_init((u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_0), mac1,
-- (u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_1), mac2);
-+ ap94_pci_init((u8 *) KSEG1ADDR(calloc1), mac1,
-+ (u8 *) KSEG1ADDR(calloc2), mac2);
-+}
-+
-+static void __init dir825b1_setup(void)
-+{
-+ dir825b1_common_setup(DIR825B1_MAC_LOCATION_0, DIR825B1_MAC_LOCATION_1,
-+ DIR825B1_CAL_LOCATION_0, DIR825B1_CAL_LOCATION_1);
-+}
-+
-+static void __init dir825b1_wholeflash_setup(void)
-+{
-+ dir825b1_common_setup(DIR825B1_WHOLEFLASH_MAC_LOCATION_0, DIR825B1_WHOLEFLASH_MAC_LOCATION_1,
-+ DIR825B1_WHOLEFLASH_CAL_LOCATION_0, DIR825B1_WHOLEFLASH_CAL_LOCATION_1);
- }
-
- MIPS_MACHINE(ATH79_MACH_DIR_825_B1, "DIR-825-B1", "D-Link DIR-825 rev. B1",
- dir825b1_setup);
-+
-+MIPS_MACHINE(ATH79_MACH_DIR_825_B1_TOWHOLEFLASH, "DIR-825-B1_TOWHOLEFLASH", "D-Link DIR-825 rev. B1 TOWHOLEFLASH",
-+ dir825b1_setup);
-+
-+MIPS_MACHINE(ATH79_MACH_DIR_825_B1_WHOLEFLASH, "DIR-825-B1_WHOLEFLASH", "D-Link DIR-825 rev. B1 WHOLEFLASH",
-+ dir825b1_wholeflash_setup);
-+
-+MIPS_MACHINE(ATH79_MACH_DIR_825_B1_TOSTOCK, "DIR-825-B1_TOSTOCK", "D-Link DIR-825 rev. B1 TOSTOCK", dir825b1_wholeflash_setup);
-+
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -35,6 +35,9 @@ enum ath79_mach_type {
- ATH79_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */
- ATH79_MACH_DIR_615_E4, /* D-Link DIR-615 rev. E4 */
- ATH79_MACH_DIR_825_B1, /* D-Link DIR-825 rev. B1 */
-+ ATH79_MACH_DIR_825_B1_TOWHOLEFLASH, /* D-Link DIR-825 rev. B1 TOWHOLEFLASH */
-+ ATH79_MACH_DIR_825_B1_WHOLEFLASH, /* D-Link DIR-825 rev. B1 WHOLEFLASH */
-+ ATH79_MACH_DIR_825_B1_TOSTOCK, /* D-Link DIR-825 rev. B1 TOSTOCK */
- ATH79_MACH_EW_DORIN, /* embedded wireless Dorin Platform */
- ATH79_MACH_EW_DORIN_ROUTER, /* embedded wireless Dorin Router Platform */
- ATH79_MACH_EAP7660D, /* Senao EAP7660D */
projects / openwrt / svn-archive / openwrt.git / commitdiff