This is an automatically generated commit.
When doing `git bisect`, consider `git bisect --skip`.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
+++ /dev/null
-CONFIG_64BIT=y
-# CONFIG_AHCI_SUNXI is not set
-CONFIG_ARCH_CLOCKSOURCE_INIT=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_MMAP_RND_BITS=18
-CONFIG_ARCH_MMAP_RND_BITS_MAX=24
-CONFIG_ARCH_MMAP_RND_BITS_MIN=18
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
-CONFIG_ARCH_RV64I=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_STACKWALK=y
-CONFIG_ARCH_SUNXI=y
-CONFIG_ARCH_WANTS_THP_SWAP=y
-CONFIG_ASN1=y
-CONFIG_ASSOCIATIVE_ARRAY=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_CC_HAVE_STACKPROTECTOR_TLS=y
-CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
-CONFIG_CC_NO_ARRAY_BOUNDS=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CLZ_TAB=y
-CONFIG_CMODEL_MEDANY=y
-# CONFIG_CMODEL_MEDLOW is not set
-CONFIG_COMMON_CLK=y
-CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
-# CONFIG_COMPAT_32BIT_TIME is not set
-CONFIG_COMPAT_BRK=y
-CONFIG_CONTEXT_TRACKING=y
-CONFIG_CONTEXT_TRACKING_IDLE=y
-CONFIG_COREDUMP=y
-CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
-CONFIG_CPU_ISOLATION=y
-CONFIG_CPU_RMAP=y
-CONFIG_CRC16=y
-# CONFIG_CRC32_SARWATE is not set
-CONFIG_CRC32_SLICEBY8=y
-CONFIG_CRC7=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRYPTO_DEV_ALLWINNER=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_DIRECT_REMAP=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_SUN6I=y
-CONFIG_DMA_VIRTUAL_CHANNELS=y
-CONFIG_DTC=y
-CONFIG_DWMAC_GENERIC=y
-CONFIG_DWMAC_SUN8I=y
-CONFIG_DWMAC_SUNXI=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EFI=y
-CONFIG_EFIVAR_FS=m
-# CONFIG_EFI_BOOTLOADER_CONTROL is not set
-# CONFIG_EFI_CAPSULE_LOADER is not set
-# CONFIG_EFI_COCO_SECRET is not set
-# CONFIG_EFI_DISABLE_PCI_DMA is not set
-# CONFIG_EFI_DISABLE_RUNTIME is not set
-CONFIG_EFI_EARLYCON=y
-CONFIG_EFI_ESRT=y
-CONFIG_EFI_GENERIC_STUB=y
-CONFIG_EFI_PARAMS_FROM_FDT=y
-CONFIG_EFI_RUNTIME_WRAPPERS=y
-CONFIG_EFI_STUB=y
-# CONFIG_EFI_TEST is not set
-# CONFIG_EFI_ZBOOT is not set
-CONFIG_ELF_CORE=y
-# CONFIG_ERRATA_SIFIVE is not set
-CONFIG_ERRATA_THEAD=y
-CONFIG_ERRATA_THEAD_CMO=y
-CONFIG_ERRATA_THEAD_PBMT=y
-CONFIG_EXT4_FS=y
-CONFIG_EXTCON=y
-CONFIG_FAILOVER=y
-CONFIG_FHANDLE=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FONT_8x16=y
-CONFIG_FONT_AUTOSELECT=y
-CONFIG_FONT_SUPPORT=y
-CONFIG_FPU=y
-CONFIG_FRAME_POINTER=y
-CONFIG_FRAME_WARN=2048
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FWNODE_MDIO=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_FW_LOADER_SYSFS=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IOREMAP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_CDEV=y
-CONFIG_GPIO_PCF857X=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HID=y
-CONFIG_HID_GENERIC=y
-CONFIG_HVC_DRIVER=y
-CONFIG_HVC_RISCV_SBI=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_MV64XXX=y
-CONFIG_I2C_OCORES=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT=y
-CONFIG_IOMMU_API=y
-# CONFIG_IOMMU_DEBUGFS is not set
-# CONFIG_IOMMU_DEFAULT_DMA_LAZY is not set
-CONFIG_IOMMU_DEFAULT_DMA_STRICT=y
-# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
-CONFIG_IOMMU_SUPPORT=y
-CONFIG_IO_URING=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-CONFIG_KALLSYMS=y
-# CONFIG_KEYBOARD_SUN4I_LRADC is not set
-# CONFIG_LEDS_PWM_MULTICOLOR is not set
-# CONFIG_LEDS_SUN50I_A100 is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_LIBFDT=y
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_MAILBOX=y
-# CONFIG_MAILBOX_TEST is not set
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_BUS_MUX=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_DEVRES=y
-# CONFIG_MDIO_SUN4I is not set
-CONFIG_MEMFD_CREATE=y
-CONFIG_MFD_AXP20X=y
-CONFIG_MFD_AXP20X_I2C=y
-CONFIG_MFD_CORE=y
-# CONFIG_MFD_SUN4I_GPADC is not set
-CONFIG_MFD_SUN6I_PRCM=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_SUNXI=y
-CONFIG_MMIOWB=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NET_PTP_CLASSIFY=y
-CONFIG_NET_VENDOR_ALLWINNER=y
-CONFIG_NLS=y
-# CONFIG_NONPORTABLE is not set
-CONFIG_NOP_USB_XCEIV=y
-CONFIG_NR_CPUS=8
-CONFIG_NVMEM=y
-CONFIG_NVMEM_SUNXI_SID=y
-CONFIG_NVMEM_SYSFS=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_DMA_DEFAULT_COHERENT=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IOMMU=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OID_REGISTRY=y
-CONFIG_PADATA=y
-CONFIG_PAGE_OFFSET=0xff60000000000000
-CONFIG_PAGE_POOL=y
-CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
-CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
-# CONFIG_PAGE_TABLE_CHECK is not set
-CONFIG_PANIC_TIMEOUT=0
-CONFIG_PCPU_DEV_REFCNT=y
-CONFIG_PGTABLE_LEVELS=5
-CONFIG_PHYLIB=y
-CONFIG_PHYLINK=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PHY_SUN4I_USB=y
-CONFIG_PHY_SUN50I_USB3=y
-# CONFIG_PHY_SUN6I_MIPI_DPHY is not set
-# CONFIG_PHY_SUN9I_USB is not set
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_SUN20I_D1=y
-# CONFIG_PINCTRL_SUN4I_A10 is not set
-# CONFIG_PINCTRL_SUN50I_A100 is not set
-# CONFIG_PINCTRL_SUN50I_A100_R is not set
-# CONFIG_PINCTRL_SUN50I_A64 is not set
-# CONFIG_PINCTRL_SUN50I_A64_R is not set
-# CONFIG_PINCTRL_SUN50I_H5 is not set
-# CONFIG_PINCTRL_SUN50I_H6 is not set
-# CONFIG_PINCTRL_SUN50I_H616 is not set
-# CONFIG_PINCTRL_SUN50I_H616_R is not set
-# CONFIG_PINCTRL_SUN50I_H6_R is not set
-# CONFIG_PINCTRL_SUN5I is not set
-# CONFIG_PINCTRL_SUN6I_A31 is not set
-# CONFIG_PINCTRL_SUN6I_A31_R is not set
-# CONFIG_PINCTRL_SUN8I_A23 is not set
-# CONFIG_PINCTRL_SUN8I_A23_R is not set
-# CONFIG_PINCTRL_SUN8I_A33 is not set
-# CONFIG_PINCTRL_SUN8I_A83T is not set
-# CONFIG_PINCTRL_SUN8I_A83T_R is not set
-# CONFIG_PINCTRL_SUN8I_H3 is not set
-# CONFIG_PINCTRL_SUN8I_H3_R is not set
-# CONFIG_PINCTRL_SUN8I_V3S is not set
-# CONFIG_PINCTRL_SUN9I_A80 is not set
-# CONFIG_PINCTRL_SUN9I_A80_R is not set
-CONFIG_PINCTRL_SUNXI=y
-CONFIG_PORTABLE=y
-CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_SYSCON=y
-CONFIG_POWER_RESET_SYSCON_POWEROFF=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PPS=y
-CONFIG_PREEMPT_NONE_BUILD=y
-CONFIG_PRINTK_TIME=y
-CONFIG_PTP_1588_CLOCK=y
-CONFIG_PTP_1588_CLOCK_OPTIONAL=y
-CONFIG_PWM=y
-# CONFIG_PWM_CLK is not set
-# CONFIG_PWM_SIFIVE is not set
-# CONFIG_PWM_SUN4I is not set
-# CONFIG_PWM_SUN8I_V536 is not set
-CONFIG_PWM_SYSFS=y
-# CONFIG_PWM_XILINX is not set
-CONFIG_RATIONAL=y
-CONFIG_RCU_TRACE=y
-CONFIG_REALTEK_PHY=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_IRQ=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_AXP20X is not set
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_SUN20I=y
-# CONFIG_RESET_ATTACK_MITIGATION is not set
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RESET_SIMPLE=y
-CONFIG_RESET_SUNXI=y
-CONFIG_RISCV=y
-CONFIG_RISCV_ALTERNATIVE=y
-CONFIG_RISCV_ALTERNATIVE_EARLY=y
-CONFIG_RISCV_BOOT_SPINWAIT=y
-CONFIG_RISCV_DMA_NONCOHERENT=y
-CONFIG_RISCV_INTC=y
-CONFIG_RISCV_ISA_C=y
-CONFIG_RISCV_ISA_SVPBMT=y
-CONFIG_RISCV_ISA_ZICBOM=y
-CONFIG_RISCV_SBI=y
-CONFIG_RISCV_SBI_V01=y
-CONFIG_RISCV_TIMER=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_DRV_EFI is not set
-CONFIG_RTC_DRV_GOLDFISH=y
-CONFIG_RTC_DRV_SUN6I=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_SCHED_DEBUG=y
-CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
-CONFIG_SERIAL_8250_DW=y
-CONFIG_SERIAL_8250_DWLIB=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-CONFIG_SERIAL_EARLYCON_RISCV_SBI=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SG_POOL=y
-CONFIG_SIFIVE_PLIC=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_SMP=y
-# CONFIG_SND_SUN20I_CODEC is not set
-# CONFIG_SND_SUN4I_I2S is not set
-# CONFIG_SND_SUN50I_DMIC is not set
-CONFIG_SOCK_RX_QUEUE_MAPPING=y
-# CONFIG_SOC_MICROCHIP_POLARFIRE is not set
-# CONFIG_SOC_SIFIVE is not set
-# CONFIG_SOC_STARFIVE is not set
-# CONFIG_SOC_VIRT is not set
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-# CONFIG_SPI_SUN4I is not set
-CONFIG_SPI_SUN6I=y
-CONFIG_SRCU=y
-CONFIG_STACKDEPOT=y
-CONFIG_STACKTRACE=y
-CONFIG_STMMAC_ETH=y
-CONFIG_STMMAC_PLATFORM=y
-CONFIG_SUN20I_D1_CCU=y
-CONFIG_SUN20I_D1_R_CCU=y
-# CONFIG_SUN4I_EMAC is not set
-CONFIG_SUN4I_TIMER=y
-CONFIG_SUN50I_IOMMU=y
-CONFIG_SUN6I_MSGBOX=y
-CONFIG_SUN6I_RTC_CCU=y
-CONFIG_SUN8I_DE2_CCU=y
-# CONFIG_SUN8I_R_CCU is not set
-# CONFIG_SUN8I_THERMAL is not set
-CONFIG_SUNXI_CCU=y
-# CONFIG_SUNXI_RSB is not set
-CONFIG_SUNXI_SRAM=y
-CONFIG_SUNXI_WATCHDOG=y
-CONFIG_SWIOTLB=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-# CONFIG_SYSFB_SIMPLEFB is not set
-CONFIG_SYSFS_SYSCALL=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TOOLCHAIN_HAS_ZICBOM=y
-CONFIG_TOOLCHAIN_HAS_ZIHINTPAUSE=y
-CONFIG_TOOLCHAIN_NEEDS_EXPLICIT_ZICSR_ZIFENCEI=y
-CONFIG_TRACE_CLOCK=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_TUNE_GENERIC=y
-# CONFIG_UACCE is not set
-CONFIG_UCS2_STRING=y
-CONFIG_UEVENT_HELPER_PATH=""
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_PLATFORM=y
-CONFIG_USB_HID=y
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_HOST=y
-CONFIG_USB_MUSB_SUNXI=y
-CONFIG_USB_NET_DRIVERS=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PLATFORM=y
-CONFIG_USB_PHY=y
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_UHCI_HCD is not set
-CONFIG_USB_XHCI_HCD=y
-# CONFIG_USB_XHCI_PLATFORM is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_VHOST_MENU is not set
-# CONFIG_VIRTIO_MENU is not set
-CONFIG_VMAP_STACK=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XPS=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZONE_DMA32=y
--- /dev/null
+CONFIG_64BIT=y
+# CONFIG_AHCI_SUNXI is not set
+CONFIG_ARCH_CLOCKSOURCE_INIT=y
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_ARCH_MMAP_RND_BITS=18
+CONFIG_ARCH_MMAP_RND_BITS_MAX=24
+CONFIG_ARCH_MMAP_RND_BITS_MIN=18
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
+CONFIG_ARCH_RV64I=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_STACKWALK=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_ARCH_WANTS_THP_SWAP=y
+CONFIG_ASN1=y
+CONFIG_ASSOCIATIVE_ARRAY=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_MQ_PCI=y
+CONFIG_CC_HAVE_STACKPROTECTOR_TLS=y
+CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
+CONFIG_CC_NO_ARRAY_BOUNDS=y
+CONFIG_CLKSRC_MMIO=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CLZ_TAB=y
+CONFIG_CMODEL_MEDANY=y
+# CONFIG_CMODEL_MEDLOW is not set
+CONFIG_COMMON_CLK=y
+CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
+# CONFIG_COMPAT_32BIT_TIME is not set
+CONFIG_COMPAT_BRK=y
+CONFIG_CONTEXT_TRACKING=y
+CONFIG_CONTEXT_TRACKING_IDLE=y
+CONFIG_COREDUMP=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+CONFIG_CPU_ISOLATION=y
+CONFIG_CPU_RMAP=y
+CONFIG_CRC16=y
+# CONFIG_CRC32_SARWATE is not set
+CONFIG_CRC32_SLICEBY8=y
+CONFIG_CRC7=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRYPTO_DEV_ALLWINNER=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_DIRECT_REMAP=y
+CONFIG_DMA_ENGINE=y
+CONFIG_DMA_OF=y
+CONFIG_DMA_SUN6I=y
+CONFIG_DMA_VIRTUAL_CHANNELS=y
+CONFIG_DTC=y
+CONFIG_DWMAC_GENERIC=y
+CONFIG_DWMAC_SUN8I=y
+CONFIG_DWMAC_SUNXI=y
+CONFIG_EDAC_SUPPORT=y
+CONFIG_EFI=y
+CONFIG_EFIVAR_FS=m
+# CONFIG_EFI_BOOTLOADER_CONTROL is not set
+# CONFIG_EFI_CAPSULE_LOADER is not set
+# CONFIG_EFI_COCO_SECRET is not set
+# CONFIG_EFI_DISABLE_PCI_DMA is not set
+# CONFIG_EFI_DISABLE_RUNTIME is not set
+CONFIG_EFI_EARLYCON=y
+CONFIG_EFI_ESRT=y
+CONFIG_EFI_GENERIC_STUB=y
+CONFIG_EFI_PARAMS_FROM_FDT=y
+CONFIG_EFI_RUNTIME_WRAPPERS=y
+CONFIG_EFI_STUB=y
+# CONFIG_EFI_TEST is not set
+# CONFIG_EFI_ZBOOT is not set
+CONFIG_ELF_CORE=y
+# CONFIG_ERRATA_SIFIVE is not set
+CONFIG_ERRATA_THEAD=y
+CONFIG_ERRATA_THEAD_CMO=y
+CONFIG_ERRATA_THEAD_PBMT=y
+CONFIG_EXT4_FS=y
+CONFIG_EXTCON=y
+CONFIG_FAILOVER=y
+CONFIG_FHANDLE=y
+CONFIG_FIXED_PHY=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_FONT_8x16=y
+CONFIG_FONT_AUTOSELECT=y
+CONFIG_FONT_SUPPORT=y
+CONFIG_FPU=y
+CONFIG_FRAME_POINTER=y
+CONFIG_FRAME_WARN=2048
+CONFIG_FS_IOMAP=y
+CONFIG_FS_MBCACHE=y
+CONFIG_FWNODE_MDIO=y
+CONFIG_FW_LOADER_PAGED_BUF=y
+CONFIG_FW_LOADER_SYSFS=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_ARCH_TOPOLOGY=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_EARLY_IOREMAP=y
+CONFIG_GENERIC_GETTIMEOFDAY=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IOREMAP=y
+CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
+CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
+CONFIG_GENERIC_MSI_IRQ=y
+CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PHY=y
+CONFIG_GENERIC_PINCONF=y
+CONFIG_GENERIC_PINCTRL_GROUPS=y
+CONFIG_GENERIC_PINMUX_FUNCTIONS=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GLOB=y
+CONFIG_GPIOLIB_IRQCHIP=y
+CONFIG_GPIO_CDEV=y
+CONFIG_GPIO_PCF857X=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+CONFIG_HID=y
+CONFIG_HID_GENERIC=y
+CONFIG_HVC_DRIVER=y
+CONFIG_HVC_RISCV_SBI=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_MV64XXX=y
+CONFIG_I2C_OCORES=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INPUT=y
+CONFIG_IOMMU_API=y
+# CONFIG_IOMMU_DEBUGFS is not set
+# CONFIG_IOMMU_DEFAULT_DMA_LAZY is not set
+CONFIG_IOMMU_DEFAULT_DMA_STRICT=y
+# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
+CONFIG_IOMMU_SUPPORT=y
+CONFIG_IO_URING=y
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_DOMAIN_HIERARCHY=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+CONFIG_JBD2=y
+CONFIG_KALLSYMS=y
+# CONFIG_KEYBOARD_SUN4I_LRADC is not set
+# CONFIG_LEDS_PWM_MULTICOLOR is not set
+# CONFIG_LEDS_SUN50I_A100 is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_LIBFDT=y
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_LOCK_DEBUGGING_SUPPORT=y
+CONFIG_LOCK_SPIN_ON_OWNER=y
+CONFIG_MAILBOX=y
+# CONFIG_MAILBOX_TEST is not set
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_BUS_MUX=y
+CONFIG_MDIO_DEVICE=y
+CONFIG_MDIO_DEVRES=y
+# CONFIG_MDIO_SUN4I is not set
+CONFIG_MEMFD_CREATE=y
+CONFIG_MFD_AXP20X=y
+CONFIG_MFD_AXP20X_I2C=y
+CONFIG_MFD_CORE=y
+# CONFIG_MFD_SUN4I_GPADC is not set
+CONFIG_MFD_SUN6I_PRCM=y
+CONFIG_MFD_SYSCON=y
+CONFIG_MIGRATION=y
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_SUNXI=y
+CONFIG_MMIOWB=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NET_PTP_CLASSIFY=y
+CONFIG_NET_VENDOR_ALLWINNER=y
+CONFIG_NLS=y
+# CONFIG_NONPORTABLE is not set
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_NR_CPUS=8
+CONFIG_NVMEM=y
+CONFIG_NVMEM_SUNXI_SID=y
+CONFIG_NVMEM_SYSFS=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_DMA_DEFAULT_COHERENT=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IOMMU=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_KOBJ=y
+CONFIG_OF_MDIO=y
+CONFIG_OID_REGISTRY=y
+CONFIG_PADATA=y
+CONFIG_PAGE_OFFSET=0xff60000000000000
+CONFIG_PAGE_POOL=y
+CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
+CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
+# CONFIG_PAGE_TABLE_CHECK is not set
+CONFIG_PANIC_TIMEOUT=0
+CONFIG_PCPU_DEV_REFCNT=y
+CONFIG_PGTABLE_LEVELS=5
+CONFIG_PHYLIB=y
+CONFIG_PHYLINK=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_PHY_SUN4I_USB=y
+CONFIG_PHY_SUN50I_USB3=y
+# CONFIG_PHY_SUN6I_MIPI_DPHY is not set
+# CONFIG_PHY_SUN9I_USB is not set
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_SUN20I_D1=y
+# CONFIG_PINCTRL_SUN4I_A10 is not set
+# CONFIG_PINCTRL_SUN50I_A100 is not set
+# CONFIG_PINCTRL_SUN50I_A100_R is not set
+# CONFIG_PINCTRL_SUN50I_A64 is not set
+# CONFIG_PINCTRL_SUN50I_A64_R is not set
+# CONFIG_PINCTRL_SUN50I_H5 is not set
+# CONFIG_PINCTRL_SUN50I_H6 is not set
+# CONFIG_PINCTRL_SUN50I_H616 is not set
+# CONFIG_PINCTRL_SUN50I_H616_R is not set
+# CONFIG_PINCTRL_SUN50I_H6_R is not set
+# CONFIG_PINCTRL_SUN5I is not set
+# CONFIG_PINCTRL_SUN6I_A31 is not set
+# CONFIG_PINCTRL_SUN6I_A31_R is not set
+# CONFIG_PINCTRL_SUN8I_A23 is not set
+# CONFIG_PINCTRL_SUN8I_A23_R is not set
+# CONFIG_PINCTRL_SUN8I_A33 is not set
+# CONFIG_PINCTRL_SUN8I_A83T is not set
+# CONFIG_PINCTRL_SUN8I_A83T_R is not set
+# CONFIG_PINCTRL_SUN8I_H3 is not set
+# CONFIG_PINCTRL_SUN8I_H3_R is not set
+# CONFIG_PINCTRL_SUN8I_V3S is not set
+# CONFIG_PINCTRL_SUN9I_A80 is not set
+# CONFIG_PINCTRL_SUN9I_A80_R is not set
+CONFIG_PINCTRL_SUNXI=y
+CONFIG_PORTABLE=y
+CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
+CONFIG_POWER_RESET_SYSCON_POWEROFF=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_PPS=y
+CONFIG_PREEMPT_NONE_BUILD=y
+CONFIG_PRINTK_TIME=y
+CONFIG_PTP_1588_CLOCK=y
+CONFIG_PTP_1588_CLOCK_OPTIONAL=y
+CONFIG_PWM=y
+# CONFIG_PWM_CLK is not set
+# CONFIG_PWM_SIFIVE is not set
+# CONFIG_PWM_SUN4I is not set
+# CONFIG_PWM_SUN8I_V536 is not set
+CONFIG_PWM_SYSFS=y
+# CONFIG_PWM_XILINX is not set
+CONFIG_RATIONAL=y
+CONFIG_RCU_TRACE=y
+CONFIG_REALTEK_PHY=y
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=y
+CONFIG_REGMAP_IRQ=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_AXP20X is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_SUN20I=y
+# CONFIG_RESET_ATTACK_MITIGATION is not set
+CONFIG_RESET_CONTROLLER=y
+CONFIG_RESET_SIMPLE=y
+CONFIG_RESET_SUNXI=y
+CONFIG_RISCV=y
+CONFIG_RISCV_ALTERNATIVE=y
+CONFIG_RISCV_ALTERNATIVE_EARLY=y
+CONFIG_RISCV_BOOT_SPINWAIT=y
+CONFIG_RISCV_DMA_NONCOHERENT=y
+CONFIG_RISCV_INTC=y
+CONFIG_RISCV_ISA_C=y
+CONFIG_RISCV_ISA_SVPBMT=y
+CONFIG_RISCV_ISA_ZICBOM=y
+CONFIG_RISCV_SBI=y
+CONFIG_RISCV_SBI_V01=y
+CONFIG_RISCV_TIMER=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_DRV_EFI is not set
+CONFIG_RTC_DRV_GOLDFISH=y
+CONFIG_RTC_DRV_SUN6I=y
+CONFIG_RTC_I2C_AND_SPI=y
+CONFIG_RWSEM_SPIN_ON_OWNER=y
+CONFIG_SCHED_DEBUG=y
+CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_8250_DWLIB=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_EARLYCON_RISCV_SBI=y
+CONFIG_SERIAL_MCTRL_GPIO=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SG_POOL=y
+CONFIG_SIFIVE_PLIC=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_SMP=y
+# CONFIG_SND_SUN20I_CODEC is not set
+# CONFIG_SND_SUN4I_I2S is not set
+# CONFIG_SND_SUN50I_DMIC is not set
+CONFIG_SOCK_RX_QUEUE_MAPPING=y
+# CONFIG_SOC_MICROCHIP_POLARFIRE is not set
+# CONFIG_SOC_SIFIVE is not set
+# CONFIG_SOC_STARFIVE is not set
+# CONFIG_SOC_VIRT is not set
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_SPI=y
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_MEM=y
+# CONFIG_SPI_SUN4I is not set
+CONFIG_SPI_SUN6I=y
+CONFIG_SRCU=y
+CONFIG_STACKDEPOT=y
+CONFIG_STACKTRACE=y
+CONFIG_STMMAC_ETH=y
+CONFIG_STMMAC_PLATFORM=y
+CONFIG_SUN20I_D1_CCU=y
+CONFIG_SUN20I_D1_R_CCU=y
+# CONFIG_SUN4I_EMAC is not set
+CONFIG_SUN4I_TIMER=y
+CONFIG_SUN50I_IOMMU=y
+CONFIG_SUN6I_MSGBOX=y
+CONFIG_SUN6I_RTC_CCU=y
+CONFIG_SUN8I_DE2_CCU=y
+# CONFIG_SUN8I_R_CCU is not set
+# CONFIG_SUN8I_THERMAL is not set
+CONFIG_SUNXI_CCU=y
+# CONFIG_SUNXI_RSB is not set
+CONFIG_SUNXI_SRAM=y
+CONFIG_SUNXI_WATCHDOG=y
+CONFIG_SWIOTLB=y
+CONFIG_SWPHY=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+# CONFIG_SYSFB_SIMPLEFB is not set
+CONFIG_SYSFS_SYSCALL=y
+CONFIG_THREAD_INFO_IN_TASK=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TIMER_OF=y
+CONFIG_TIMER_PROBE=y
+CONFIG_TOOLCHAIN_HAS_ZICBOM=y
+CONFIG_TOOLCHAIN_HAS_ZIHINTPAUSE=y
+CONFIG_TOOLCHAIN_NEEDS_EXPLICIT_ZICSR_ZIFENCEI=y
+CONFIG_TRACE_CLOCK=y
+CONFIG_TREE_RCU=y
+CONFIG_TREE_SRCU=y
+CONFIG_TUNE_GENERIC=y
+# CONFIG_UACCE is not set
+CONFIG_UCS2_STRING=y
+CONFIG_UEVENT_HELPER_PATH=""
+CONFIG_USB=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_HID=y
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_HOST=y
+CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB_NET_DRIVERS=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_PHY=y
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_UHCI_HCD is not set
+CONFIG_USB_XHCI_HCD=y
+# CONFIG_USB_XHCI_PLATFORM is not set
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
+# CONFIG_VHOST_MENU is not set
+# CONFIG_VIRTIO_MENU is not set
+CONFIG_VMAP_STACK=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_WATCHDOG_CORE=y
+CONFIG_XPS=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZONE_DMA32=y
+++ /dev/null
-From e663d510ae6a81694a8e9e1ce07bb80dd6b77558 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 24 Jul 2022 17:12:07 -0500
-Subject: [PATCH 001/117] dt-bindings: net: bluetooth: realtek: Add RTL8723DS
-
-RTL8723DS is another version of the RTL8723 WiFi + Bluetooth chip. It is
-already supported by the hci_uart/btrtl driver. Document the compatible.
-
-Series-to: Marcel Holtmann <marcel@holtmann.org>
-Series-to: Johan Hedberg <johan.hedberg@gmail.com>
-Series-to: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
-Series-to: David S. Miller <davem@davemloft.net>
-Series-to: Eric Dumazet <edumazet@google.com>
-Series-to: Jakub Kicinski <kuba@kernel.org>
-Series-to: Paolo Abeni <pabeni@redhat.com>
-Series-cc: linux-bluetooth@vger.kernel.org
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- Documentation/devicetree/bindings/net/realtek-bluetooth.yaml | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml
-+++ b/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml
-@@ -20,6 +20,7 @@ properties:
- enum:
- - realtek,rtl8723bs-bt
- - realtek,rtl8723cs-bt
-+ - realtek,rtl8723ds-bt
- - realtek,rtl8822cs-bt
-
- device-wake-gpios:
+++ /dev/null
-From 74492b9ecd874496578693d9985649665b560308 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 7 Aug 2022 20:08:49 -0500
-Subject: [PATCH 002/117] clk: sunxi-ng: mp: Avoid computing the rate twice
-
-ccu_mp_find_best() already computes a best_rate at the same time as the
-best m and p factors. Return it so the caller does not need to duplicate
-the division.
-
-Series-to: Chen-Yu Tsai <wens@csie.org>
-Series-to: Jernej Skrabec <jernej.skrabec@gmail.com>
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- drivers/clk/sunxi-ng/ccu_mp.c | 11 ++++++-----
- 1 file changed, 6 insertions(+), 5 deletions(-)
-
---- a/drivers/clk/sunxi-ng/ccu_mp.c
-+++ b/drivers/clk/sunxi-ng/ccu_mp.c
-@@ -10,9 +10,9 @@
- #include "ccu_gate.h"
- #include "ccu_mp.h"
-
--static void ccu_mp_find_best(unsigned long parent, unsigned long rate,
-- unsigned int max_m, unsigned int max_p,
-- unsigned int *m, unsigned int *p)
-+static unsigned long ccu_mp_find_best(unsigned long parent, unsigned long rate,
-+ unsigned int max_m, unsigned int max_p,
-+ unsigned int *m, unsigned int *p)
- {
- unsigned long best_rate = 0;
- unsigned int best_m = 0, best_p = 0;
-@@ -35,6 +35,8 @@ static void ccu_mp_find_best(unsigned lo
-
- *m = best_m;
- *p = best_p;
-+
-+ return best_rate;
- }
-
- static unsigned long ccu_mp_find_best_with_parent_adj(struct clk_hw *hw,
-@@ -109,8 +111,7 @@ static unsigned long ccu_mp_round_rate(s
- max_p = cmp->p.max ?: 1 << ((1 << cmp->p.width) - 1);
-
- if (!clk_hw_can_set_rate_parent(&cmp->common.hw)) {
-- ccu_mp_find_best(*parent_rate, rate, max_m, max_p, &m, &p);
-- rate = *parent_rate / p / m;
-+ rate = ccu_mp_find_best(*parent_rate, rate, max_m, max_p, &m, &p);
- } else {
- rate = ccu_mp_find_best_with_parent_adj(hw, parent_rate, rate,
- max_m, max_p);
+++ /dev/null
-From 7185f7b424dfd9082bf0859a60b98a2dbd784ed6 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Mon, 5 Sep 2022 16:45:44 -0500
-Subject: [PATCH 003/117] dt-bindings: net: sun8i-emac: Add phy-supply property
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- .../devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
-+++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
-@@ -40,6 +40,9 @@ properties:
- clock-names:
- const: stmmaceth
-
-+ phy-supply:
-+ description: PHY regulator
-+
- syscon:
- $ref: /schemas/types.yaml#/definitions/phandle
- description:
+++ /dev/null
-From d20bb97fac77e4d88424043627c769427fc0d35e Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Mon, 5 Sep 2022 16:46:34 -0500
-Subject: [PATCH 004/117] dt-bindings: net: sun8i-emac: Add properties from
- dwmac binding
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- .../devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
-+++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
-@@ -40,6 +40,9 @@ properties:
- clock-names:
- const: stmmaceth
-
-+ resets: true
-+ reset-names: true
-+
- phy-supply:
- description: PHY regulator
-
-@@ -49,6 +52,8 @@ properties:
- Phandle to the device containing the EMAC or GMAC clock
- register
-
-+ mdio: true
-+
- required:
- - compatible
- - reg
+++ /dev/null
-From c99d1e681dc460892004054a314fa7f929f43490 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sat, 13 Aug 2022 10:45:59 -0500
-Subject: [PATCH 005/117] dt-bindings: display: sun8i-a83t-dw-hdmi: Remove
- #phy-cells
-
-This device is not a PHY, and none of the nodes using this schema
-contain a #phy-cells property. Likely this was a copy/paste error
-introduced during the YAML conversion.
-
-Fixes: f5a98bfe7b37 ("dt-bindings: display: Convert Allwinner display pipeline to schemas")
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- .../bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml | 3 ---
- 1 file changed, 3 deletions(-)
-
---- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
-+++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
-@@ -20,9 +20,6 @@ maintainers:
- - Maxime Ripard <mripard@kernel.org>
-
- properties:
-- "#phy-cells":
-- const: 0
--
- compatible:
- oneOf:
- - const: allwinner,sun8i-a83t-dw-hdmi
+++ /dev/null
-From e214b79d45cccdd0cfe839e54da2b3c82b6c6be4 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Thu, 31 Mar 2022 23:43:15 -0500
-Subject: [PATCH 006/117] dt-bindings: display: Add D1 HDMI compatibles
-
-Allwinner D1 contains a DesignWare HDMI controller with some changes in
-platform integration, and a new HDMI PHY. Add their compatibles.
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- .../bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml | 1 +
- .../bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml | 1 +
- 2 files changed, 2 insertions(+)
-
---- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
-+++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
-@@ -29,6 +29,7 @@ properties:
- - enum:
- - allwinner,sun8i-h3-dw-hdmi
- - allwinner,sun8i-r40-dw-hdmi
-+ - allwinner,sun20i-d1-dw-hdmi
- - allwinner,sun50i-a64-dw-hdmi
- - const: allwinner,sun8i-a83t-dw-hdmi
-
---- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml
-+++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml
-@@ -19,6 +19,7 @@ properties:
- - allwinner,sun8i-a83t-hdmi-phy
- - allwinner,sun8i-h3-hdmi-phy
- - allwinner,sun8i-r40-hdmi-phy
-+ - allwinner,sun20i-d1-hdmi-phy
- - allwinner,sun50i-a64-hdmi-phy
- - allwinner,sun50i-h6-hdmi-phy
-
+++ /dev/null
-From 75dc74ecc1bf5e270659c6c78877053b50e6ae19 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Wed, 30 Mar 2022 21:24:21 -0500
-Subject: [PATCH 007/117] drm/sun4i: Add support for D1 HDMI
-
-D1's HDMI controller contains some platform integration changes.
-It now has no external TMDS clock. The controller also supports HDCP
-without an external clock or reset.
-
-While the maximum HDMI frequency is not explicity stated, the BSP PHY
-driver provides PLL configurations only up to 297 MHz, so use that as
-the max frequency.
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c | 11 ++++++++++-
- 1 file changed, 10 insertions(+), 1 deletion(-)
-
---- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c
-+++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c
-@@ -133,7 +133,7 @@ static int sun8i_dw_hdmi_bind(struct dev
- return dev_err_probe(dev, PTR_ERR(hdmi->rst_ctrl),
- "Could not get ctrl reset control\n");
-
-- hdmi->clk_tmds = devm_clk_get(dev, "tmds");
-+ hdmi->clk_tmds = devm_clk_get_optional(dev, "tmds");
- if (IS_ERR(hdmi->clk_tmds))
- return dev_err_probe(dev, PTR_ERR(hdmi->clk_tmds),
- "Couldn't get the tmds clock\n");
-@@ -246,6 +246,11 @@ static const struct sun8i_dw_hdmi_quirks
- .mode_valid = sun8i_dw_hdmi_mode_valid_a83t,
- };
-
-+static const struct sun8i_dw_hdmi_quirks sun20i_d1_quirks = {
-+ .mode_valid = sun8i_dw_hdmi_mode_valid_a83t,
-+ .use_drm_infoframe = true,
-+};
-+
- static const struct sun8i_dw_hdmi_quirks sun50i_h6_quirks = {
- .mode_valid = sun8i_dw_hdmi_mode_valid_h6,
- .use_drm_infoframe = true,
-@@ -257,6 +262,10 @@ static const struct of_device_id sun8i_d
- .data = &sun8i_a83t_quirks,
- },
- {
-+ .compatible = "allwinner,sun20i-d1-dw-hdmi",
-+ .data = &sun20i_d1_quirks,
-+ },
-+ {
- .compatible = "allwinner,sun50i-h6-dw-hdmi",
- .data = &sun50i_h6_quirks,
- },
+++ /dev/null
-From 11f9765a8e6723bcb7243f6dbc48e6deaf17b097 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 3 Apr 2022 15:15:41 -0500
-Subject: [PATCH 008/117] drm/sun4i: sun8i-hdmi-phy: Add support for D1 PHY
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h | 169 +++++++++++++++++++++++++
- drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 32 +++++
- 2 files changed, 201 insertions(+)
-
---- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
-+++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
-@@ -145,6 +145,175 @@
-
- #define SUN8I_HDMI_PHY_CEC_REG 0x003c
-
-+#define SUN20I_HDMI_PHY_CTL0_REG 0x0040
-+#define SUN20I_HDMI_PHY_CTL0_PLL_LOCK_MODE_MAN BIT(31)
-+#define SUN20I_HDMI_PHY_CTL0_PLL_LOCK_MODE BIT(30)
-+#define SUN20I_HDMI_PHY_CTL0_FIFO_WORKC_EN BIT(29)
-+#define SUN20I_HDMI_PHY_CTL0_FIFO_AUTOSYNC_DIS BIT(28)
-+#define SUN20I_HDMI_PHY_CTL0_ENTX GENMASK(27, 24)
-+#define SUN20I_HDMI_PHY_CTL0_ENBI GENMASK(23, 20)
-+#define SUN20I_HDMI_PHY_CTL0_ENLDO BIT(18)
-+#define SUN20I_HDMI_PHY_CTL0_ENLDO_FS BIT(17)
-+#define SUN20I_HDMI_PHY_CTL0_ENCK BIT(16)
-+#define SUN20I_HDMI_PHY_CTL0_REG_PLR GENMASK(15, 12)
-+#define SUN20I_HDMI_PHY_CTL0_REG_DEN GENMASK(11, 8)
-+#define SUN20I_HDMI_PHY_CTL0_REG_CSMPS GENMASK(7, 6)
-+#define SUN20I_HDMI_PHY_CTL0_REG_CK_TEST_SEL BIT(5)
-+#define SUN20I_HDMI_PHY_CTL0_REG_CK_SEL BIT(4)
-+#define SUN20I_HDMI_PHY_CTL0_HPD_EN BIT(2)
-+#define SUN20I_HDMI_PHY_CTL0_SCL_EN BIT(1)
-+#define SUN20I_HDMI_PHY_CTL0_SDA_EN BIT(0)
-+
-+#define SUN20I_HDMI_PHY_CTL1_REG 0x0044
-+#define SUN20I_HDMI_PHY_CTL1_RXSENSE_MODE_MAN BIT(31)
-+#define SUN20I_HDMI_PHY_CTL1_RXSENSE_MODE BIT(30)
-+#define SUN20I_HDMI_PHY_CTL1_RES_S GENMASK(29, 28)
-+#define SUN20I_HDMI_PHY_CTL1_RES_SCKTMDS BIT(27)
-+#define SUN20I_HDMI_PHY_CTL1_REG_SWI BIT(26)
-+#define SUN20I_HDMI_PHY_CTL1_REG_SVR GENMASK(25, 24)
-+#define SUN20I_HDMI_PHY_CTL1_REG_BST2 GENMASK(21, 20)
-+#define SUN20I_HDMI_PHY_CTL1_REG_BST1 GENMASK(19, 18)
-+#define SUN20I_HDMI_PHY_CTL1_REG_BST0 GENMASK(17, 16)
-+#define SUN20I_HDMI_PHY_CTL1_REG_SP2_3 GENMASK(15, 12)
-+#define SUN20I_HDMI_PHY_CTL1_REG_SP2_2 GENMASK(11, 8)
-+#define SUN20I_HDMI_PHY_CTL1_REG_SP2_1 GENMASK(7, 4)
-+#define SUN20I_HDMI_PHY_CTL1_REG_SP2_0 GENMASK(3, 0)
-+
-+#define SUN20I_HDMI_PHY_CTL2_REG 0x0048
-+#define SUN20I_HDMI_PHY_CTL2_HPDO_MODE_MAN BIT(31)
-+#define SUN20I_HDMI_PHY_CTL2_HPDO_MODE BIT(30)
-+#define SUN20I_HDMI_PHY_CTL2_REG_RESDI GENMASK(29, 24)
-+#define SUN20I_HDMI_PHY_CTL2_REG_SP1_3 GENMASK(23, 19)
-+#define SUN20I_HDMI_PHY_CTL2_REG_SP1_2 GENMASK(18, 14)
-+#define SUN20I_HDMI_PHY_CTL2_REG_SP1_1 GENMASK(13, 9)
-+#define SUN20I_HDMI_PHY_CTL2_REG_SP1_0 GENMASK(8, 4)
-+#define SUN20I_HDMI_PHY_CTL2_REG_P2OPT GENMASK(3, 0)
-+
-+#define SUN20I_HDMI_PHY_CTL3_REG 0x004c
-+#define SUN20I_HDMI_PHY_CTL3_REG_P2_3 GENMASK(31, 28)
-+#define SUN20I_HDMI_PHY_CTL3_REG_P2_2 GENMASK(27, 24)
-+#define SUN20I_HDMI_PHY_CTL3_REG_P2_1 GENMASK(23, 20)
-+#define SUN20I_HDMI_PHY_CTL3_REG_P2_0 GENMASK(19, 16)
-+#define SUN20I_HDMI_PHY_CTL3_REG_MC3 GENMASK(15, 12)
-+#define SUN20I_HDMI_PHY_CTL3_REG_MC2 GENMASK(11, 8)
-+#define SUN20I_HDMI_PHY_CTL3_REG_MC1 GENMASK(7, 4)
-+#define SUN20I_HDMI_PHY_CTL3_REG_MC0 GENMASK(3, 0)
-+
-+#define SUN20I_HDMI_PHY_CTL4_REG 0x0050
-+#define SUN20I_HDMI_PHY_CTL4_REG_SLV GENMASK(31, 29)
-+#define SUN20I_HDMI_PHY_CTL4_REG_P1_3 GENMASK(28, 24)
-+#define SUN20I_HDMI_PHY_CTL4_REG_P1_2 GENMASK(20, 16)
-+#define SUN20I_HDMI_PHY_CTL4_REG_P1_1 GENMASK(12, 8)
-+#define SUN20I_HDMI_PHY_CTL4_REG_P1_0 GENMASK(4, 0)
-+
-+#define SUN20I_HDMI_PHY_CTL5_REG 0x0054
-+#define SUN20I_HDMI_PHY_CTL5_REG_P1OPT GENMASK(19, 16)
-+#define SUN20I_HDMI_PHY_CTL5_REG_CKPDLYOPT BIT(12)
-+#define SUN20I_HDMI_PHY_CTL5_REG_CALSW BIT(11)
-+#define SUN20I_HDMI_PHY_CTL5_ENRESCK BIT(10)
-+#define SUN20I_HDMI_PHY_CTL5_ENRES BIT(9)
-+#define SUN20I_HDMI_PHY_CTL5_ENRCAL BIT(8)
-+#define SUN20I_HDMI_PHY_CTL5_ENP2S GENMASK(7, 4)
-+#define SUN20I_HDMI_PHY_CTL5_ENIB BIT(1)
-+#define SUN20I_HDMI_PHY_CTL5_ENCALOG BIT(0)
-+
-+#define SUN20I_HDMI_PLL_CTL0_REG 0x0058
-+#define SUN20I_HDMI_PLL_CTL0_CKO_SEL GENMASK(31, 30)
-+#define SUN20I_HDMI_PLL_CTL0_BYPASS_PPLL BIT(29)
-+#define SUN20I_HDMI_PLL_CTL0_ENVBS BIT(28)
-+#define SUN20I_HDMI_PLL_CTL0_SLV GENMASK(26, 24)
-+#define SUN20I_HDMI_PLL_CTL0_BCR BIT(23)
-+#define SUN20I_HDMI_PLL_CTL0_BYPASS_CLRDPTH BIT(22)
-+#define SUN20I_HDMI_PLL_CTL0_CLR_DPTH GENMASK(21, 20)
-+#define SUN20I_HDMI_PLL_CTL0_CUTFB BIT(18)
-+#define SUN20I_HDMI_PLL_CTL0_DIV2_CKBIT BIT(17)
-+#define SUN20I_HDMI_PLL_CTL0_DIV2_CKTMDS BIT(16)
-+#define SUN20I_HDMI_PLL_CTL0_DIV_PRE GENMASK(15, 12)
-+#define SUN20I_HDMI_PLL_CTL0_DIVX1 BIT(10)
-+#define SUN20I_HDMI_PLL_CTL0_SDRVEN BIT(9)
-+#define SUN20I_HDMI_PLL_CTL0_VCORANGE BIT(8)
-+#define SUN20I_HDMI_PLL_CTL0_N_CNTRL GENMASK(7, 6)
-+#define SUN20I_HDMI_PLL_CTL0_GMP_CNTRL GENMASK(5, 4)
-+#define SUN20I_HDMI_PLL_CTL0_PROP_CNTRL GENMASK(2, 0)
-+
-+#define SUN20I_HDMI_PLL_CTL1_REG 0x005c
-+#define SUN20I_HDMI_PLL_CTL1_CTRL_MODLE_CLKSRC BIT(31)
-+#define SUN20I_HDMI_PLL_CTL1_PCNT_N GENMASK(27, 20)
-+#define SUN20I_HDMI_PLL_CTL1_PCNT_EN BIT(19)
-+#define SUN20I_HDMI_PLL_CTL1_SDM_EN BIT(18)
-+#define SUN20I_HDMI_PLL_CTL1_PIXEL_REP GENMASK(17, 16)
-+#define SUN20I_HDMI_PLL_CTL1_PWRON BIT(12)
-+#define SUN20I_HDMI_PLL_CTL1_RESET BIT(11)
-+#define SUN20I_HDMI_PLL_CTL1_SCKREF BIT(10)
-+#define SUN20I_HDMI_PLL_CTL1_SCKFB BIT(9)
-+#define SUN20I_HDMI_PLL_CTL1_DRV_ANA BIT(8)
-+#define SUN20I_HDMI_PLL_CTL1_FAST_TECH BIT(7)
-+#define SUN20I_HDMI_PLL_CTL1_GEAR_SHIFT BIT(6)
-+#define SUN20I_HDMI_PLL_CTL1_REF_CNTRL GENMASK(5, 4)
-+#define SUN20I_HDMI_PLL_CTL1_INT_CNTRL GENMASK(2, 0)
-+
-+#define SUN20I_HDMI_AFIFO_CFG_REG 0x0060
-+#define SUN20I_HDMI_AFIFO_CFG_AFIFO_ERROR BIT(0)
-+#define SUN20I_HDMI_AFIFO_CFG_AFIFO_ERROR_DET BIT(1)
-+
-+#define SUN20I_HDMI_MODULATOR_CFG0_REG 0x0064
-+#define SUN20I_HDMI_MODULATOR_CFG1_REG 0x0068
-+
-+#define SUN20I_HDMI_INDEB_CTRL_REG 0x006c
-+#define SUN20I_HDMI_INDEB_CTRL_HPDI_DEBUGMODE BIT(29)
-+#define SUN20I_HDMI_INDEB_CTRL_HPDI_DEBUG BIT(28)
-+#define SUN20I_HDMI_INDEB_CTRL_SDAI_DEBUGMODE BIT(25)
-+#define SUN20I_HDMI_INDEB_CTRL_SDAI_DEBUG BIT(24)
-+#define SUN20I_HDMI_INDEB_CTRL_SCLI_DEBUGMODE BIT(21)
-+#define SUN20I_HDMI_INDEB_CTRL_SCLI_DEBUG BIT(20)
-+#define SUN20I_HDMI_INDEB_CTRL_CECI_DEBUGMODE BIT(17)
-+#define SUN20I_HDMI_INDEB_CTRL_CECI_DEBUG BIT(16)
-+#define SUN20I_HDMI_INDEB_CTRL_TXDATA_DEBUGMODE GENMASK(1, 0)
-+
-+#define SUN20I_HDMI_INDBG_TXD0_REG 0x0070
-+#define SUN20I_HDMI_INDBG_TXD1_REG 0x0074
-+#define SUN20I_HDMI_INDBG_TXD2_REG 0x0078
-+#define SUN20I_HDMI_INDBG_TXD3_REG 0x007c
-+
-+#define SUN20I_HDMI_PLL_STS_REG 0x0080
-+#define SUN20I_HDMI_PLL_STS_PHY_CDETPCK_STATUS BIT(31)
-+#define SUN20I_HDMI_PLL_STS_PHY_CDETP_STATUS GENMASK(30, 28)
-+#define SUN20I_HDMI_PLL_STS_PHY_CDETNCK_STATUS BIT(27)
-+#define SUN20I_HDMI_PLL_STS_PHY_CDETN_STATUS GENMASK(26, 24)
-+#define SUN20I_HDMI_PLL_STS_PHY_HPDO_STATUS BIT(23)
-+#define SUN20I_HDMI_PLL_STS_PHY_SCLO_STATUS BIT(22)
-+#define SUN20I_HDMI_PLL_STS_PHY_SDAO_STATUS BIT(21)
-+#define SUN20I_HDMI_PLL_STS_PHY_CECO_STATUS BIT(20)
-+#define SUN20I_HDMI_PLL_STS_PHY_COUT2D_STATUS BIT(17)
-+#define SUN20I_HDMI_PLL_STS_PHY_RCALEND2D_STS BIT(16)
-+#define SUN20I_HDMI_PLL_STS_PHY_RESDO2D_STATUS GENMASK(13, 8)
-+#define SUN20I_HDMI_PLL_STS_PLL_LOCK_STATUS BIT(4)
-+#define SUN20I_HDMI_PLL_STS_RXSENSE_DLY_STATUS BIT(1)
-+#define SUN20I_HDMI_PLL_STS_TX_READY_DLY_STATUS BIT(0)
-+
-+#define SUN20I_HDMI_PRBS_CTL_REG 0x0084
-+#define SUN20I_HDMI_PRBS_SEED_GEN_REG 0x0088
-+#define SUN20I_HDMI_PRBS_SEED_CHK_REG 0x008c
-+#define SUN20I_HDMI_PRBS_SEED_NUM_REG 0x0090
-+#define SUN20I_HDMI_PRBS_CYCLE_NUM_REG 0x0094
-+
-+#define SUN20I_HDMI_PLL_ODLY_REG 0x0098
-+#define SUN20I_HDMI_PLL_ODLY_RXSENSE_DLY_RESET BIT(31)
-+#define SUN20I_HDMI_PLL_ODLY_RXSENSE_DLY_COUNT GENMASK(30, 16)
-+#define SUN20I_HDMI_PLL_ODLY_TX_READY_DLY_RESET BIT(15)
-+#define SUN20I_HDMI_PLL_ODLY_TX_READY_DLY_COUNT GENMASK(14, 0)
-+
-+#define SUN20I_HDMI_PHY_CTL6_REG 0x009c
-+#define SUN20I_HDMI_PHY_CTL6_SWITCH_CLKCH_DATA BIT(31)
-+#define SUN20I_HDMI_PHY_CTL6_EN_CKDAT BIT(30)
-+#define SUN20I_HDMI_PHY_CTL6_CLK_GREATE2_340M GENMASK(29, 20)
-+#define SUN20I_HDMI_PHY_CTL6_CLK_GREATE1_340M GENMASK(19, 10)
-+#define SUN20I_HDMI_PHY_CTL6_CLK_GREATE0_340M GENMASK(9, 0)
-+
-+#define SUN20I_HDMI_PHY_CTL7_REG 0x00a0
-+#define SUN20I_HDMI_PHY_CTL7_CLK_LOW_340M GENMASK(21, 12)
-+#define SUN20I_HDMI_PHY_CTL7_CLK_GREATE3_340M GENMASK(9, 0)
-+
- struct sun8i_hdmi_phy;
-
- struct sun8i_hdmi_phy_variant {
---- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
-+++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
-@@ -398,6 +398,28 @@ static const struct dw_hdmi_phy_ops sun8
- .setup_hpd = dw_hdmi_phy_setup_hpd,
- };
-
-+static int sun20i_d1_hdmi_phy_config(struct dw_hdmi *hdmi, void *data,
-+ const struct drm_display_info *display,
-+ const struct drm_display_mode *mode)
-+{
-+ struct sun8i_hdmi_phy *phy = data;
-+
-+ return 0;
-+}
-+
-+static void sun20i_d1_hdmi_phy_disable(struct dw_hdmi *hdmi, void *data)
-+{
-+ struct sun8i_hdmi_phy *phy = data;
-+}
-+
-+static const struct dw_hdmi_phy_ops sun20i_d1_hdmi_phy_ops = {
-+ .init = sun20i_d1_hdmi_phy_config,
-+ .disable = sun20i_d1_hdmi_phy_disable,
-+ .read_hpd = dw_hdmi_phy_read_hpd,
-+ .update_hpd = dw_hdmi_phy_update_hpd,
-+ .setup_hpd = dw_hdmi_phy_setup_hpd,
-+};
-+
- static void sun8i_hdmi_phy_unlock(struct sun8i_hdmi_phy *phy)
- {
- /* enable read access to HDMI controller */
-@@ -576,6 +598,7 @@ void sun8i_hdmi_phy_set_ops(struct sun8i
- const struct sun8i_hdmi_phy_variant *variant = phy->variant;
-
- if (variant->phy_ops) {
-+ plat_data->phy_force_vendor = true;
- plat_data->phy_ops = variant->phy_ops;
- plat_data->phy_name = "sun8i_dw_hdmi_phy";
- plat_data->phy_data = phy;
-@@ -612,6 +635,11 @@ static const struct sun8i_hdmi_phy_varia
- .phy_init = &sun8i_hdmi_phy_init_h3,
- };
-
-+static const struct sun8i_hdmi_phy_variant sun20i_d1_hdmi_phy = {
-+ .phy_ops = &sun20i_d1_hdmi_phy_ops,
-+ .phy_init = &sun50i_hdmi_phy_init_h6,
-+};
-+
- static const struct sun8i_hdmi_phy_variant sun50i_a64_hdmi_phy = {
- .has_phy_clk = true,
- .phy_ops = &sun8i_h3_hdmi_phy_ops,
-@@ -639,6 +667,10 @@ static const struct of_device_id sun8i_h
- .data = &sun8i_r40_hdmi_phy,
- },
- {
-+ .compatible = "allwinner,sun20i-d1-hdmi-phy",
-+ .data = &sun20i_d1_hdmi_phy,
-+ },
-+ {
- .compatible = "allwinner,sun50i-a64-hdmi-phy",
- .data = &sun50i_a64_hdmi_phy,
- },
+++ /dev/null
-From 7ea7d4abfd537230da58533803a2d0257addace8 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Wed, 30 Mar 2022 00:46:07 -0500
-Subject: [PATCH 009/117] drm/sun4i: Copy in BSP code for D1 HDMI PHY
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- drivers/gpu/drm/sun4i/aw_phy.h | 411 +++++++++++++++++++++++++
- drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h | 1 +
- drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 156 ++++++++++
- 3 files changed, 568 insertions(+)
- create mode 100644 drivers/gpu/drm/sun4i/aw_phy.h
-
---- /dev/null
-+++ b/drivers/gpu/drm/sun4i/aw_phy.h
-@@ -0,0 +1,411 @@
-+/*
-+ * Allwinner SoCs hdmi2.0 driver.
-+ *
-+ * Copyright (C) 2016 Allwinner.
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2. This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#ifndef AW_PHY_H_
-+#define AW_PHY_H_
-+
-+#define AW_PHY_TIMEOUT 1000
-+#define LOCK_TIMEOUT 100
-+
-+/* allwinner phy register offset */
-+#define HDMI_PHY_CTL0 0x40
-+#define HDMI_PHY_CTL1 0x44
-+#define HDMI_PHY_CTL2 0x48
-+#define HDMI_PHY_CTL3 0x4C
-+#define HDMI_PHY_CTL4 0x50
-+#define HDMI_PHY_CTL5 0x54
-+#define HDMI_PLL_CTL0 0x58
-+#define HDMI_PLL_CTL1 0x5C
-+#define HDMI_AFIFO_CFG 0x60
-+#define HDMI_MODULATOR_CFG0 0x64
-+#define HDMI_MODULATOR_CFG1 0x68
-+#define HDMI_PHY_INDEB_CTRL 0x6C
-+#define HDMI_PHY_INDBG_TXD0 0x70
-+#define HDMI_PHY_INDBG_TXD1 0x74
-+#define HDMI_PHY_INDBG_TXD2 0x78
-+#define HDMI_PHY_INDBG_TXD3 0x7C
-+#define HDMI_PHY_PLL_STS 0x80
-+#define HDMI_PRBS_CTL 0x84
-+#define HDMI_PRBS_SEED_GEN 0x88
-+#define HDMI_PRBS_SEED_CHK 0x8C
-+#define HDMI_PRBS_SEED_NUM 0x90
-+#define HDMI_PRBS_CYCLE_NUM 0x94
-+#define HDMI_PHY_PLL_ODLY_CFG 0x98
-+#define HDMI_PHY_CTL6 0x9C
-+#define HDMI_PHY_CTL7 0xA0
-+
-+typedef union {
-+ u32 dwval;
-+ struct {
-+ u32 sda_en :1; // Default: 0;
-+ u32 scl_en :1; // Default: 0;
-+ u32 hpd_en :1; // Default: 0;
-+ u32 res0 :1; // Default: 0;
-+ u32 reg_ck_sel :1; // Default: 1;
-+ u32 reg_ck_test_sel :1; // Default: 1;
-+ u32 reg_csmps :2; // Default: 0;
-+ u32 reg_den :4; // Default: F;
-+ u32 reg_plr :4; // Default: 0;
-+ u32 enck :1; // Default: 1;
-+ u32 enldo_fs :1; // Default: 1;
-+ u32 enldo :1; // Default: 1;
-+ u32 res1 :1; // Default: 1;
-+ u32 enbi :4; // Default: F;
-+ u32 entx :4; // Default: F;
-+ u32 async_fifo_autosync_disable :1; // Default: 0;
-+ u32 async_fifo_workc_enable :1; // Default: 1;
-+ u32 phy_pll_lock_mode :1; // Default: 1;
-+ u32 phy_pll_lock_mode_man :1; // Default: 1;
-+ } bits;
-+} HDMI_PHY_CTL0_t; //=========================== 0x0040
-+
-+typedef union {
-+ u32 dwval;
-+ struct {
-+ u32 reg_sp2_0 : 4 ; // Default: 0;
-+ u32 reg_sp2_1 : 4 ; // Default: 0;
-+ u32 reg_sp2_2 : 4 ; // Default: 0;
-+ u32 reg_sp2_3 : 4 ; // Default: 0;
-+ u32 reg_bst0 : 2 ; // Default: 3;
-+ u32 reg_bst1 : 2 ; // Default: 3;
-+ u32 reg_bst2 : 2 ; // Default: 3;
-+ u32 res0 : 2 ; // Default: 0;
-+ u32 reg_svr : 2 ; // Default: 2;
-+ u32 reg_swi : 1 ; // Default: 0;
-+ u32 res_scktmds : 1 ; // Default: 0;
-+ u32 res_res_s : 2 ; // Default: 3;
-+ u32 phy_rxsense_mode : 1 ; // Default: 0;
-+ u32 res_rxsense_mode_man : 1 ; // Default: 0;
-+ } bits;
-+} HDMI_PHY_CTL1_t; //===================================================== 0x0044
-+
-+typedef union {
-+ u32 dwval;
-+ struct {
-+ u32 reg_p2opt : 4 ; // Default: 0;
-+ u32 reg_sp1_0 : 5 ; // Default: 0;
-+ u32 reg_sp1_1 : 5 ; // Default: 0;
-+ u32 reg_sp1_2 : 5 ; // Default: 0;
-+ u32 reg_sp1_3 : 5 ; // Default: 0;
-+ u32 reg_resdi : 6 ; // Default: 18;
-+ u32 phy_hpdo_mode : 1 ; // Default: 0;
-+ u32 phy_hpdo_mode_man : 1 ; // Default: 0;
-+ } bits;
-+} HDMI_PHY_CTL2_t; //===================================================== 0x0048
-+
-+
-+
-+typedef union {
-+ u32 dwval;
-+ struct {
-+ u32 reg_mc0 : 4 ; // Default: F;
-+ u32 reg_mc1 : 4 ; // Default: F;
-+ u32 reg_mc2 : 4 ; // Default: F;
-+ u32 reg_mc3 : 4 ; // Default: F;
-+ u32 reg_p2_0 : 4 ; // Default: F;
-+ u32 reg_p2_1 : 4 ; // Default: F;
-+ u32 reg_p2_2 : 4 ; // Default: F;
-+ u32 reg_p2_3 : 4 ; // Default: F;
-+ } bits;
-+} HDMI_PHY_CTL3_t; //===================================================== 0x004C
-+
-+
-+
-+typedef union {
-+ u32 dwval;
-+ struct {
-+ u32 reg_p1_0 : 5 ; // Default: 0x10;
-+ u32 res0 : 3 ; // Default: 0;
-+ u32 reg_p1_1 : 5 ; // Default: 0x10;
-+ u32 res1 : 3 ; // Default: 0;
-+ u32 reg_p1_2 : 5 ; // Default: 0x10;
-+ u32 res2 : 3 ; // Default: 0;
-+ u32 reg_p1_3 : 5 ; // Default: 0x10;
-+ u32 reg_slv : 3 ; // Default: 0;
-+ } bits;
-+} HDMI_PHY_CTL4_t; //===================================================== 0x0050
-+
-+typedef union {
-+ u32 dwval;
-+ struct {
-+ u32 encalog : 1 ; // Default: 0x1;
-+ u32 enib : 1 ; // Default: 0x1;
-+ u32 res0 : 2 ; // Default: 0;
-+ u32 enp2s : 4 ; // Default: 0xF;
-+ u32 enrcal : 1 ; // Default: 0x1;
-+ u32 enres : 1 ; // Default: 1;
-+ u32 enresck : 1 ; // Default: 1;
-+ u32 reg_calsw : 1 ; // Default: 0;
-+ u32 reg_ckpdlyopt : 1 ; // Default: 0;
-+ u32 res1 : 3 ; // Default: 0;
-+ u32 reg_p1opt : 4 ; // Default: 0;
-+ u32 res2 : 12 ; // Default: 0;
-+ } bits;
-+} HDMI_PHY_CTL5_t; //===================================================== 0x0054
-+
-+typedef union {
-+ u32 dwval;
-+ struct {
-+ u32 prop_cntrl : 3 ; // Default: 0x7;
-+ u32 res0 : 1 ; // Default: 0;
-+ u32 gmp_cntrl : 2 ; // Default: 1;
-+ u32 n_cntrl : 2 ; // Default: 0;
-+ u32 vcorange : 1 ; // Default: 0;
-+ u32 sdrven : 1 ; // Default: 0;
-+ u32 divx1 : 1 ; // Default: 0;
-+ u32 res1 : 1 ; // Default: 0;
-+ u32 div_pre : 4 ; // Default: 0;
-+ u32 div2_cktmds : 1 ; // Default: 1;
-+ u32 div2_ckbit : 1 ; // Default: 1;
-+ u32 cutfb : 1 ; // Default: 0;
-+ u32 res2 : 1 ; // Default: 0;
-+ u32 clr_dpth : 2 ; // Default: 0;
-+ u32 bypass_clrdpth : 1 ; // Default: 0;
-+ u32 bcr : 1 ; // Default: 0;
-+ u32 slv : 3 ; // Default: 4;
-+ u32 res3 : 1 ; // Default: 0;
-+ u32 envbs : 1 ; // Default: 0;
-+ u32 bypass_ppll : 1 ; // Default: 0;
-+ u32 cko_sel : 2 ; // Default: 0;
-+ } bits;
-+} HDMI_PLL_CTL0_t; //===================================================== 0x0058
-+
-+
-+
-+typedef union {
-+ u32 dwval;
-+ struct {
-+ u32 int_cntrl : 3 ; // Default: 0x0;
-+ u32 res0 : 1 ; // Default: 0;
-+ u32 ref_cntrl : 2 ; // Default: 3;
-+ u32 gear_shift : 1 ; // Default: 0;
-+ u32 fast_tech : 1 ; // Default: 0;
-+ u32 drv_ana : 1 ; // Default: 1;
-+ u32 sckfb : 1 ; // Default: 0;
-+ u32 sckref : 1 ; // Default: 0;
-+ u32 reset : 1 ; // Default: 0;
-+ u32 pwron : 1 ; // Default: 0;
-+ u32 res1 : 3 ; // Default: 0;
-+ u32 pixel_rep : 2 ; // Default: 0;
-+ u32 sdm_en : 1 ; // Default: 0;
-+ u32 pcnt_en : 1 ; // Default: 0;
-+ u32 pcnt_n : 8 ; // Default: 0xE;
-+ u32 res2 : 3 ; // Default: 0;
-+ u32 ctrl_modle_clksrc : 1 ; // Default: 0;
-+ } bits;
-+} HDMI_PLL_CTL1_t; //===================================================== 0x005C
-+
-+typedef union {
-+ u32 dwval;
-+ struct {
-+ u32 hdmi_afifo_error : 1 ; // Default: 0x0;
-+ u32 hdmi_afifo_error_det : 1 ; // Default: 0x0;
-+ u32 res0 : 30 ; // Default: 0;
-+ } bits;
-+} HDMI_AFIFO_CFG_t; //===================================================== 0x0060
-+
-+typedef union {
-+ u32 dwval;
-+ struct {
-+ u32 fnpll_mash_en : 1 ; // Default: 0x0;
-+ u32 fnpll_mash_mod : 2 ; // Default: 0x0;
-+ u32 fnpll_mash_stp : 9 ; // Default: 0x0;
-+ u32 fnpll_mash_m12 : 1 ; // Default: 0x0;
-+ u32 fnpll_mash_frq : 2 ; // Default: 0x0;
-+ u32 fnpll_mash_bot : 17 ; // Default: 0x0;
-+ } bits;
-+} HDMI_MODULATOR_CFG0_t; //===================================================== 0x0064
-+
-+typedef union {
-+ u32 dwval;
-+ struct {
-+ u32 fnpll_mash_dth : 1 ; // Default: 0x0;
-+ u32 fnpll_mash_fen : 1 ; // Default: 0x0;
-+ u32 fnpll_mash_frc : 17 ; // Default: 0x0;
-+ u32 fnpll_mash_fnv : 8 ; // Default: 0x0;
-+ u32 res0 : 5 ; // Default: 0x0;
-+ } bits;
-+} HDMI_MODULATOR_CFG1_t; //===================================================== 0x0068
-+
-+typedef union {
-+ u32 dwval;
-+ struct {
-+ u32 txdata_debugmode : 2 ; // Default: 0x0;
-+ u32 res0 : 14 ; // Default: 0x0;
-+ u32 ceci_debug : 1 ; // Default: 0x0;
-+ u32 ceci_debugmode : 1 ; // Default: 0x0;
-+ u32 res1 : 2 ; // Default: 0x0;
-+ u32 sdai_debug : 1 ; // Default: 0x0;
-+ u32 sdai_debugmode : 1 ; // Default: 0x0;
-+ u32 res2 : 2 ; // Default: 0x0;
-+ u32 scli_debug : 1 ; // Default: 0x0;
-+ u32 scli_debugmode : 1 ; // Default: 0x0;
-+ u32 res3 : 2 ; // Default: 0x0;
-+ u32 hpdi_debug : 1 ; // Default: 0x0;
-+ u32 hpdi_debugmode : 1 ; // Default: 0x0;
-+ u32 res4 : 2 ; // Default: 0x0;
-+ } bits;
-+} HDMI_PHY_INDBG_CTRL_t; //================================================== 0x006C
-+
-+typedef union {
-+ u32 dwval;
-+ struct {
-+ u32 txdata0_debug_data : 32 ; // Default: 0x0;
-+ } bits;
-+} HDMI_PHY_INDBG_TXD0_t; //================================================== 0x0070
-+
-+typedef union {
-+ u32 dwval;
-+ struct {
-+ u32 txdata1_debug_data : 32 ; // Default: 0x0;
-+ } bits;
-+} HDMI_PHY_INDBG_TXD1_t; //================================================== 0x0074
-+
-+typedef union {
-+ u32 dwval;
-+ struct {
-+ u32 txdata2_debug_data : 32 ; // Default: 0x0;
-+ } bits;
-+} HDMI_PHY_INDBG_TXD2_t; //================================================== 0x0078
-+
-+typedef union {
-+ u32 dwval;
-+ struct {
-+ u32 txdata3_debug_data : 32 ; // Default: 0x0;
-+ } bits;
-+} HDMI_PHY_INDBG_TXD3_t; //================================================== 0x007C
-+
-+typedef union {
-+ u32 dwval;
-+ struct {
-+ u32 tx_ready_dly_status : 1 ; // Default: 0x0;
-+ u32 rxsense_dly_status : 1 ; // Default: 0x0;
-+ u32 res0 : 2 ; // Default: 0x0;
-+ u32 pll_lock_status : 1 ; // Default: 0x0;
-+ u32 res1 : 3 ; // Default: 0x0;
-+ u32 phy_resdo2d_status : 6 ; // Default: 0x0;
-+ u32 res2 : 2 ; // Default: 0x0;
-+ u32 phy_rcalend2d_status : 1 ; // Default: 0x0;
-+ u32 phy_cout2d_status : 1 ; // Default: 0x0;
-+ u32 res3 : 2 ; // Default: 0x0;
-+ u32 phy_ceco_status : 1 ; // Default: 0x0;
-+ u32 phy_sdao_status : 1 ; // Default: 0x0;
-+ u32 phy_sclo_status : 1 ; // Default: 0x0;
-+ u32 phy_hpdo_status : 1 ; // Default: 0x0;
-+ u32 phy_cdetn_status : 3 ; // Default: 0x0;
-+ u32 phy_cdetnck_status : 1 ; // Default: 0x0;
-+ u32 phy_cdetp_status : 3 ; // Default: 0x0;
-+ u32 phy_cdetpck_status : 1 ; // Default: 0x0;
-+ } bits;
-+} HDMI_PHY_PLL_STS_t; //===================================================== 0x0080
-+
-+typedef union {
-+ u32 dwval;
-+ struct {
-+ u32 prbs_en : 1 ; // Default: 0x0;
-+ u32 prbs_start : 1 ; // Default: 0x0;
-+ u32 prbs_seq_gen : 1 ; // Default: 0x0;
-+ u32 prbs_seq_chk : 1 ; // Default: 0x0;
-+ u32 prbs_mode : 4 ; // Default: 0x0;
-+ u32 prbs_type : 2 ; // Default: 0x0;
-+ u32 prbs_clk_pol : 1 ; // Default: 0x0;
-+ u32 res0 : 21 ; // Default: 0x0;
-+ } bits;
-+} HDMI_PRBS_CTL_t; //===================================================== 0x0084
-+
-+typedef union {
-+ u32 dwval;
-+ struct {
-+ u32 prbs_seed_gen : 32 ; // Default: 0x0;
-+ } bits;
-+} HDMI_PRBS_SEED_GEN_t; //================================================= 0x0088
-+
-+typedef union {
-+ u32 dwval;
-+ struct {
-+ u32 prbs_seed_chk : 32 ; // Default: 0x0;
-+ } bits;
-+} HDMI_PRBS_SEED_CHK_t; //================================================= 0x008C
-+
-+typedef union {
-+ u32 dwval;
-+ struct {
-+ u32 prbs_seed_num : 32 ; // Default: 0x0;
-+ } bits;
-+} HDMI_PRBS_SEED_NUM_t; //================================================= 0x0090
-+
-+typedef union {
-+ u32 dwval;
-+ struct {
-+ u32 prbs_cycle_num : 32 ; // Default: 0x0;
-+ } bits;
-+} HDMI_PRBS_CYCLE_NUM_t; //================================================= 0x0094
-+
-+typedef union {
-+ u32 dwval;
-+ struct {
-+ u32 tx_ready_dly_count : 15 ; // Default: 0x0;
-+ u32 tx_ready_dly_reset : 1 ; // Default: 0x0;
-+ u32 rxsense_dly_count : 15 ; // Default: 0x0;
-+ u32 rxsense_dly_reset : 1 ; // Default: 0x0;
-+ } bits;
-+} HDMI_PHY_PLL_ODLY_CFG_t; //================================================= 0x0098
-+
-+typedef union {
-+ u32 dwval;
-+ struct {
-+ u32 clk_greate0_340m : 10 ; // Default: 0x3FF;
-+ u32 clk_greate1_340m : 10 ; // Default: 0x3FF;
-+ u32 clk_greate2_340m : 10 ; // Default: 0x3FF;
-+ u32 en_ckdat : 1 ; // Default: 0x3FF;
-+ u32 switch_clkch_data_corresponding : 1 ; // Default: 0x3FF;
-+ } bits;
-+} HDMI_PHY_CTL6_t; //========================================================= 0x009C
-+
-+typedef union {
-+ u32 dwval;
-+ struct {
-+ u32 clk_greate3_340m : 10 ; // Default: 0x0;
-+ u32 res0 : 2 ; // Default: 0x3FF;
-+ u32 clk_low_340m : 10 ; // Default: 0x3FF;
-+ u32 res1 : 10 ; // Default: 0x3FF;
-+ } bits;
-+} HDMI_PHY_CTL7_t; //========================================================= 0x00A0
-+
-+struct __aw_phy_reg_t {
-+ u32 res[16]; /* 0x0 ~ 0x3c */
-+ HDMI_PHY_CTL0_t phy_ctl0; /* 0x0040 */
-+ HDMI_PHY_CTL1_t phy_ctl1; /* 0x0044 */
-+ HDMI_PHY_CTL2_t phy_ctl2; /* 0x0048 */
-+ HDMI_PHY_CTL3_t phy_ctl3; /* 0x004c */
-+ HDMI_PHY_CTL4_t phy_ctl4; /* 0x0050 */
-+ HDMI_PHY_CTL5_t phy_ctl5; /* 0x0054 */
-+ HDMI_PLL_CTL0_t pll_ctl0; /* 0x0058 */
-+ HDMI_PLL_CTL1_t pll_ctl1; /* 0x005c */
-+ HDMI_AFIFO_CFG_t afifo_cfg; /* 0x0060 */
-+ HDMI_MODULATOR_CFG0_t modulator_cfg0; /* 0x0064 */
-+ HDMI_MODULATOR_CFG1_t modulator_cfg1; /* 0x0068 */
-+ HDMI_PHY_INDBG_CTRL_t phy_indbg_ctrl; /* 0x006c */
-+ HDMI_PHY_INDBG_TXD0_t phy_indbg_txd0; /* 0x0070 */
-+ HDMI_PHY_INDBG_TXD1_t phy_indbg_txd1; /* 0x0074 */
-+ HDMI_PHY_INDBG_TXD2_t phy_indbg_txd2; /* 0x0078 */
-+ HDMI_PHY_INDBG_TXD3_t phy_indbg_txd3; /* 0x007c */
-+ HDMI_PHY_PLL_STS_t phy_pll_sts; /* 0x0080 */
-+ HDMI_PRBS_CTL_t prbs_ctl; /* 0x0084 */
-+ HDMI_PRBS_SEED_GEN_t prbs_seed_gen; /* 0x0088 */
-+ HDMI_PRBS_SEED_CHK_t prbs_seed_chk; /* 0x008c */
-+ HDMI_PRBS_SEED_NUM_t prbs_seed_num; /* 0x0090 */
-+ HDMI_PRBS_CYCLE_NUM_t prbs_cycle_num; /* 0x0094 */
-+ HDMI_PHY_PLL_ODLY_CFG_t phy_pll_odly_cfg; /* 0x0098 */
-+ HDMI_PHY_CTL6_t phy_ctl6; /* 0x009c */
-+ HDMI_PHY_CTL7_t phy_ctl7; /* 0x00A0 */
-+};
-+
-+#endif /* AW_PHY_H_ */
---- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
-+++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
-@@ -334,6 +334,7 @@ struct sun8i_hdmi_phy {
- struct clk *clk_pll1;
- struct device *dev;
- unsigned int rcal;
-+ void __iomem *base;
- struct regmap *regs;
- struct reset_control *rst_phy;
- const struct sun8i_hdmi_phy_variant *variant;
---- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
-+++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
-@@ -9,6 +9,8 @@
-
- #include "sun8i_dw_hdmi.h"
-
-+#include "aw_phy.h"
-+
- /*
- * Address can be actually any value. Here is set to same value as
- * it is set in BSP driver.
-@@ -398,11 +400,164 @@ static const struct dw_hdmi_phy_ops sun8
- .setup_hpd = dw_hdmi_phy_setup_hpd,
- };
-
-+static int sun20i_d1_hdmi_phy_enable(volatile struct __aw_phy_reg_t __iomem *phy_base)
-+{
-+ int i = 0, status = 0;
-+
-+ pr_info("enter %s\n", __func__);
-+
-+ //enib -> enldo -> enrcal -> encalog -> enbi[3:0] -> enck -> enp2s[3:0] -> enres -> enresck -> entx[3:0]
-+ phy_base->phy_ctl4.bits.reg_slv = 4; //low power voltage 1.08V, default is 3, set 4 as well as pll_ctl0 bit [24:26]
-+ phy_base->phy_ctl5.bits.enib = 1;
-+ phy_base->phy_ctl0.bits.enldo = 1;
-+ phy_base->phy_ctl0.bits.enldo_fs = 1;
-+ phy_base->phy_ctl5.bits.enrcal = 1;
-+
-+ phy_base->phy_ctl5.bits.encalog = 1;
-+
-+ for (i = 0; i < AW_PHY_TIMEOUT; i++) {
-+ udelay(5);
-+ status = phy_base->phy_pll_sts.bits.phy_rcalend2d_status;
-+ if (status & 0x1) {
-+ pr_info("[%s]:phy_rcalend2d_status\n", __func__);
-+ break;
-+ }
-+ }
-+ if ((i == AW_PHY_TIMEOUT) && !status) {
-+ pr_err("phy_rcalend2d_status Timeout !\n");
-+ return -1;
-+ }
-+
-+ phy_base->phy_ctl0.bits.enbi = 0xF;
-+ for (i = 0; i < AW_PHY_TIMEOUT; i++) {
-+ udelay(5);
-+ status = phy_base->phy_pll_sts.bits.pll_lock_status;
-+ if (status & 0x1) {
-+ pr_info("[%s]:pll_lock_status\n", __func__);
-+ break;
-+ }
-+ }
-+ if ((i == AW_PHY_TIMEOUT) && !status) {
-+ pr_err("pll_lock_status Timeout! status = 0x%x\n", status);
-+ return -1;
-+ }
-+
-+ phy_base->phy_ctl0.bits.enck = 1;
-+ phy_base->phy_ctl5.bits.enp2s = 0xF;
-+ phy_base->phy_ctl5.bits.enres = 1;
-+ phy_base->phy_ctl5.bits.enresck = 1;
-+ phy_base->phy_ctl0.bits.entx = 0xF;
-+
-+ for (i = 0; i < AW_PHY_TIMEOUT; i++) {
-+ udelay(5);
-+ status = phy_base->phy_pll_sts.bits.tx_ready_dly_status;
-+ if (status & 0x1) {
-+ pr_info("[%s]:tx_ready_status\n", __func__);
-+ break;
-+ }
-+ }
-+ if ((i == AW_PHY_TIMEOUT) && !status) {
-+ pr_err("tx_ready_status Timeout ! status = 0x%x\n", status);
-+ return -1;
-+ }
-+
-+ return 0;
-+}
-+
- static int sun20i_d1_hdmi_phy_config(struct dw_hdmi *hdmi, void *data,
- const struct drm_display_info *display,
- const struct drm_display_mode *mode)
- {
- struct sun8i_hdmi_phy *phy = data;
-+ volatile struct __aw_phy_reg_t __iomem *phy_base = phy->base;
-+ int ret;
-+
-+ pr_info("enter %s\n", __func__);
-+
-+ /* enable all channel */
-+ phy_base->phy_ctl5.bits.reg_p1opt = 0xF;
-+
-+ // phy_reset
-+ phy_base->phy_ctl0.bits.entx = 0;
-+ phy_base->phy_ctl5.bits.enresck = 0;
-+ phy_base->phy_ctl5.bits.enres = 0;
-+ phy_base->phy_ctl5.bits.enp2s = 0;
-+ phy_base->phy_ctl0.bits.enck = 0;
-+ phy_base->phy_ctl0.bits.enbi = 0;
-+ phy_base->phy_ctl5.bits.encalog = 0;
-+ phy_base->phy_ctl5.bits.enrcal = 0;
-+ phy_base->phy_ctl0.bits.enldo_fs = 0;
-+ phy_base->phy_ctl0.bits.enldo = 0;
-+ phy_base->phy_ctl5.bits.enib = 0;
-+ phy_base->pll_ctl1.bits.reset = 1;
-+ phy_base->pll_ctl1.bits.pwron = 0;
-+ phy_base->pll_ctl0.bits.envbs = 0;
-+
-+ // phy_set_mpll
-+ phy_base->pll_ctl0.bits.cko_sel = 0x3;
-+ phy_base->pll_ctl0.bits.bypass_ppll = 0x1;
-+ phy_base->pll_ctl1.bits.drv_ana = 1;
-+ phy_base->pll_ctl1.bits.ctrl_modle_clksrc = 0x0; //0: PLL_video 1: MPLL
-+ phy_base->pll_ctl1.bits.sdm_en = 0x0; //mpll sdm jitter is very large, not used for the time being
-+ phy_base->pll_ctl1.bits.sckref = 0; //default value is 1
-+ phy_base->pll_ctl0.bits.slv = 4;
-+ phy_base->pll_ctl0.bits.prop_cntrl = 7; //default value 7
-+ phy_base->pll_ctl0.bits.gmp_cntrl = 3; //default value 1
-+ phy_base->pll_ctl1.bits.ref_cntrl = 0;
-+ phy_base->pll_ctl0.bits.vcorange = 1;
-+
-+ // phy_set_div
-+ phy_base->pll_ctl0.bits.div_pre = 0; //div7 = n+1
-+ phy_base->pll_ctl1.bits.pcnt_en = 0;
-+ phy_base->pll_ctl1.bits.pcnt_n = 1; //div6 = 1 (pcnt_en=0) [div6 = n (pcnt_en = 1) note that some multiples are problematic] 4-256
-+ phy_base->pll_ctl1.bits.pixel_rep = 0; //div5 = n+1
-+ phy_base->pll_ctl0.bits.bypass_clrdpth = 0;
-+ phy_base->pll_ctl0.bits.clr_dpth = 0; //div4 = 1 (bypass_clrdpth = 0)
-+ //00: 2 01: 2.5 10: 3 11: 4
-+ phy_base->pll_ctl0.bits.n_cntrl = 1; //div
-+ phy_base->pll_ctl0.bits.div2_ckbit = 0; //div1 = n+1
-+ phy_base->pll_ctl0.bits.div2_cktmds = 0; //div2 = n+1
-+ phy_base->pll_ctl0.bits.bcr = 0; //div3 0: [1:10] 1: [1:40]
-+ phy_base->pll_ctl1.bits.pwron = 1;
-+ phy_base->pll_ctl1.bits.reset = 0;
-+
-+ // configure phy
-+ /* config values taken from table */
-+ phy_base->phy_ctl1.dwval = ((phy_base->phy_ctl1.dwval & 0xFFC0FFFF) | /* config->phy_ctl1 */ 0x0);
-+ phy_base->phy_ctl2.dwval = ((phy_base->phy_ctl2.dwval & 0xFF000000) | /* config->phy_ctl2 */ 0x0);
-+ phy_base->phy_ctl3.dwval = ((phy_base->phy_ctl3.dwval & 0xFFFF0000) | /* config->phy_ctl3 */ 0xFFFF);
-+ phy_base->phy_ctl4.dwval = ((phy_base->phy_ctl4.dwval & 0xE0000000) | /* config->phy_ctl4 */ 0xC0D0D0D);
-+ //phy_base->pll_ctl0.dwval |= config->pll_ctl0;
-+ //phy_base->pll_ctl1.dwval |= config->pll_ctl1;
-+
-+ // phy_set_clk
-+ phy_base->phy_ctl6.bits.switch_clkch_data_corresponding = 0;
-+ phy_base->phy_ctl6.bits.clk_greate0_340m = 0x3FF;
-+ phy_base->phy_ctl6.bits.clk_greate1_340m = 0x3FF;
-+ phy_base->phy_ctl6.bits.clk_greate2_340m = 0x0;
-+ phy_base->phy_ctl7.bits.clk_greate3_340m = 0x0;
-+ phy_base->phy_ctl7.bits.clk_low_340m = 0x3E0;
-+ phy_base->phy_ctl6.bits.en_ckdat = 1; //default value is 0
-+
-+ // phy_base->phy_ctl2.bits.reg_resdi = 0x18;
-+ // phy_base->phy_ctl4.bits.reg_slv = 3; //low power voltage 1.08V, default value is 3
-+
-+ phy_base->phy_ctl1.bits.res_scktmds = 0; //
-+ phy_base->phy_ctl0.bits.reg_csmps = 2;
-+ phy_base->phy_ctl0.bits.reg_ck_test_sel = 0; //?
-+ phy_base->phy_ctl0.bits.reg_ck_sel = 1;
-+ phy_base->phy_indbg_ctrl.bits.txdata_debugmode = 0;
-+
-+ // phy_enable
-+ ret = sun20i_d1_hdmi_phy_enable(phy_base);
-+ if (ret)
-+ return ret;
-+
-+ phy_base->phy_ctl0.bits.sda_en = 1;
-+ phy_base->phy_ctl0.bits.scl_en = 1;
-+ phy_base->phy_ctl0.bits.hpd_en = 1;
-+ phy_base->phy_ctl0.bits.reg_den = 0xF;
-+ phy_base->pll_ctl0.bits.envbs = 1;
-
- return 0;
- }
-@@ -720,6 +875,7 @@ static int sun8i_hdmi_phy_probe(struct p
- return dev_err_probe(dev, PTR_ERR(regs),
- "Couldn't map the HDMI PHY registers\n");
-
-+ phy->base = regs;
- phy->regs = devm_regmap_init_mmio(dev, regs,
- &sun8i_hdmi_phy_regmap_config);
- if (IS_ERR(phy->regs))
+++ /dev/null
-From 02a412de18479449c87ed7a332e3fe33d2eff3a4 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Wed, 27 Apr 2022 18:47:53 -0500
-Subject: [PATCH 010/117] riscv: mm: Use IOMMU for DMA when available
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- arch/riscv/mm/dma-noncoherent.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/arch/riscv/mm/dma-noncoherent.c
-+++ b/arch/riscv/mm/dma-noncoherent.c
-@@ -7,6 +7,7 @@
-
- #include <linux/dma-direct.h>
- #include <linux/dma-map-ops.h>
-+#include <linux/iommu.h>
- #include <linux/mm.h>
- #include <asm/cacheflush.h>
-
-@@ -70,6 +71,9 @@ void arch_setup_dma_ops(struct device *d
- dev_driver_string(dev), dev_name(dev));
-
- dev->dma_coherent = coherent;
-+
-+ if (iommu)
-+ iommu_setup_dma_ops(dev, dma_base, dma_base + size - 1);
- }
-
- void riscv_noncoherent_supported(void)
+++ /dev/null
-From ee6459d60f24d91052f0288155f44e6a7f991050 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sat, 7 May 2022 18:34:25 -0500
-Subject: [PATCH 011/117] genirq: Add support for oneshot-safe threaded EOIs
-
-irqchips can use the combination of flags IRQCHIP_ONESHOT_SAFE |
-IRQCHIP_EOI_THREADED to elide mask operations.
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- kernel/irq/chip.c | 36 +++++++++++++++++-------------------
- kernel/irq/internals.h | 2 +-
- kernel/irq/manage.c | 12 ++++++------
- 3 files changed, 24 insertions(+), 26 deletions(-)
-
---- a/kernel/irq/chip.c
-+++ b/kernel/irq/chip.c
-@@ -439,16 +439,6 @@ void unmask_irq(struct irq_desc *desc)
- }
- }
-
--void unmask_threaded_irq(struct irq_desc *desc)
--{
-- struct irq_chip *chip = desc->irq_data.chip;
--
-- if (chip->flags & IRQCHIP_EOI_THREADED)
-- chip->irq_eoi(&desc->irq_data);
--
-- unmask_irq(desc);
--}
--
- /*
- * handle_nested_irq - Handle a nested irq from a irq thread
- * @irq: the interrupt number
-@@ -656,25 +646,33 @@ out_unlock:
- }
- EXPORT_SYMBOL_GPL(handle_level_irq);
-
--static void cond_unmask_eoi_irq(struct irq_desc *desc, struct irq_chip *chip)
-+void unmask_eoi_threaded_irq(struct irq_desc *desc)
- {
-- if (!(desc->istate & IRQS_ONESHOT)) {
-+ struct irq_chip *chip = desc->irq_data.chip;
-+
-+ if (desc->istate & IRQS_ONESHOT)
-+ unmask_irq(desc);
-+
-+ if (chip->flags & IRQCHIP_EOI_THREADED)
- chip->irq_eoi(&desc->irq_data);
-+}
-+
-+static void cond_unmask_eoi_irq(struct irq_desc *desc, struct irq_chip *chip)
-+{
-+ /* Do not send EOI if the thread will do it for us. */
-+ if ((chip->flags & IRQCHIP_EOI_THREADED) && desc->threads_oneshot)
- return;
-- }
-+
- /*
- * We need to unmask in the following cases:
- * - Oneshot irq which did not wake the thread (caused by a
- * spurious interrupt or a primary handler handling it
- * completely).
- */
-- if (!irqd_irq_disabled(&desc->irq_data) &&
-- irqd_irq_masked(&desc->irq_data) && !desc->threads_oneshot) {
-- chip->irq_eoi(&desc->irq_data);
-+ if ((desc->istate & IRQS_ONESHOT) && !desc->threads_oneshot)
- unmask_irq(desc);
-- } else if (!(chip->flags & IRQCHIP_EOI_THREADED)) {
-- chip->irq_eoi(&desc->irq_data);
-- }
-+
-+ chip->irq_eoi(&desc->irq_data);
- }
-
- /**
---- a/kernel/irq/internals.h
-+++ b/kernel/irq/internals.h
-@@ -93,7 +93,7 @@ extern void irq_percpu_enable(struct irq
- extern void irq_percpu_disable(struct irq_desc *desc, unsigned int cpu);
- extern void mask_irq(struct irq_desc *desc);
- extern void unmask_irq(struct irq_desc *desc);
--extern void unmask_threaded_irq(struct irq_desc *desc);
-+extern void unmask_eoi_threaded_irq(struct irq_desc *desc);
-
- #ifdef CONFIG_SPARSE_IRQ
- static inline void irq_mark_irq(unsigned int irq) { }
---- a/kernel/irq/manage.c
-+++ b/kernel/irq/manage.c
-@@ -1074,9 +1074,9 @@ static int irq_wait_for_interrupt(struct
- static void irq_finalize_oneshot(struct irq_desc *desc,
- struct irqaction *action)
- {
-- if (!(desc->istate & IRQS_ONESHOT) ||
-- action->handler == irq_forced_secondary_handler)
-+ if (action->handler == irq_forced_secondary_handler)
- return;
-+
- again:
- chip_bus_lock(desc);
- raw_spin_lock_irq(&desc->lock);
-@@ -1112,9 +1112,8 @@ again:
-
- desc->threads_oneshot &= ~action->thread_mask;
-
-- if (!desc->threads_oneshot && !irqd_irq_disabled(&desc->irq_data) &&
-- irqd_irq_masked(&desc->irq_data))
-- unmask_threaded_irq(desc);
-+ if (!desc->threads_oneshot)
-+ unmask_eoi_threaded_irq(desc);
-
- out_unlock:
- raw_spin_unlock_irq(&desc->lock);
-@@ -1662,7 +1661,8 @@ __setup_irq(unsigned int irq, struct irq
- * !ONESHOT irqs the thread mask is 0 so we can avoid a
- * conditional in irq_wake_thread().
- */
-- if (new->flags & IRQF_ONESHOT) {
-+ if ((new->flags & IRQF_ONESHOT) ||
-+ (desc->irq_data.chip->flags & (IRQCHIP_ONESHOT_SAFE | IRQCHIP_EOI_THREADED)) == (IRQCHIP_ONESHOT_SAFE | IRQCHIP_EOI_THREADED)) {
- /*
- * Unlikely to have 32 resp 64 irqs sharing one line,
- * but who knows.
+++ /dev/null
-From 1fbe96ec05c41b313b4e7cc4b39b191b4a3f7540 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sat, 7 May 2022 18:38:34 -0500
-Subject: [PATCH 012/117] irqchip/sifive-plic: Enable oneshot-safe threaded
- EOIs
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- drivers/irqchip/irq-sifive-plic.c | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
---- a/drivers/irqchip/irq-sifive-plic.c
-+++ b/drivers/irqchip/irq-sifive-plic.c
-@@ -207,7 +207,9 @@ static struct irq_chip plic_chip = {
- .irq_set_affinity = plic_set_affinity,
- #endif
- .irq_set_type = plic_irq_set_type,
-- .flags = IRQCHIP_AFFINITY_PRE_STARTUP,
-+ .flags = IRQCHIP_ONESHOT_SAFE |
-+ IRQCHIP_EOI_THREADED |
-+ IRQCHIP_AFFINITY_PRE_STARTUP,
- };
-
- static int plic_irq_set_type(struct irq_data *d, unsigned int type)
+++ /dev/null
-From d6cf6473b0aaec455e48bccefe318a98a87b789f Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sat, 28 May 2022 19:04:56 -0500
-Subject: [PATCH 013/117] irqchip/sifive-plic: Support wake IRQs
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- drivers/irqchip/irq-sifive-plic.c | 6 ++++--
- 1 file changed, 4 insertions(+), 2 deletions(-)
-
---- a/drivers/irqchip/irq-sifive-plic.c
-+++ b/drivers/irqchip/irq-sifive-plic.c
-@@ -193,7 +193,8 @@ static struct irq_chip plic_edge_chip =
- .irq_set_affinity = plic_set_affinity,
- #endif
- .irq_set_type = plic_irq_set_type,
-- .flags = IRQCHIP_AFFINITY_PRE_STARTUP,
-+ .flags = IRQCHIP_SKIP_SET_WAKE |
-+ IRQCHIP_AFFINITY_PRE_STARTUP,
- };
-
- static struct irq_chip plic_chip = {
-@@ -207,7 +208,8 @@ static struct irq_chip plic_chip = {
- .irq_set_affinity = plic_set_affinity,
- #endif
- .irq_set_type = plic_irq_set_type,
-- .flags = IRQCHIP_ONESHOT_SAFE |
-+ .flags = IRQCHIP_SKIP_SET_WAKE |
-+ IRQCHIP_ONESHOT_SAFE |
- IRQCHIP_EOI_THREADED |
- IRQCHIP_AFFINITY_PRE_STARTUP,
- };
+++ /dev/null
-From 0e871e791a2530562851109346affa1c0d9987e0 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 13 Jun 2021 23:15:56 -0500
-Subject: [PATCH 014/117] mmc: sunxi-mmc: Correct the maximum segment size
-
-According to the DMA descriptor documentation, the lowest two bits of
-the size field are ignored, so the size must be rounded up to a multiple
-of 4 bytes. Furthermore, 0 is not a valid buffer size; setting the size
-to 0 will cause that DMA descriptor to be ignored.
-
-Together, these restrictions limit the maximum DMA segment size to 4
-less than the power-of-two width of the size field.
-
-Series-to: Ulf Hansson <ulf.hansson@linaro.org>
-Series-to: linux-mmc@vger.kernel.org
-
-Fixes: 3cbcb16095f9 ("mmc: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs")
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- drivers/mmc/host/sunxi-mmc.c | 14 ++++++++------
- 1 file changed, 8 insertions(+), 6 deletions(-)
-
---- a/drivers/mmc/host/sunxi-mmc.c
-+++ b/drivers/mmc/host/sunxi-mmc.c
-@@ -214,6 +214,9 @@
- #define SDXC_IDMAC_DES0_CES BIT(30) /* card error summary */
- #define SDXC_IDMAC_DES0_OWN BIT(31) /* 1-idma owns it, 0-host owns it */
-
-+/* Buffer size must be a multiple of 4 bytes. */
-+#define SDXC_IDMAC_SIZE_ALIGN 4
-+
- #define SDXC_CLK_400K 0
- #define SDXC_CLK_25M 1
- #define SDXC_CLK_50M 2
-@@ -361,17 +364,15 @@ static void sunxi_mmc_init_idma_des(stru
- {
- struct sunxi_idma_des *pdes = (struct sunxi_idma_des *)host->sg_cpu;
- dma_addr_t next_desc = host->sg_dma;
-- int i, max_len = (1 << host->cfg->idma_des_size_bits);
-+ int i;
-
- for (i = 0; i < data->sg_len; i++) {
- pdes[i].config = cpu_to_le32(SDXC_IDMAC_DES0_CH |
- SDXC_IDMAC_DES0_OWN |
- SDXC_IDMAC_DES0_DIC);
-
-- if (data->sg[i].length == max_len)
-- pdes[i].buf_size = 0; /* 0 == max_len */
-- else
-- pdes[i].buf_size = cpu_to_le32(data->sg[i].length);
-+ pdes[i].buf_size = cpu_to_le32(ALIGN(data->sg[i].length,
-+ SDXC_IDMAC_SIZE_ALIGN));
-
- next_desc += sizeof(struct sunxi_idma_des);
- pdes[i].buf_addr_ptr1 =
-@@ -1421,7 +1422,8 @@ static int sunxi_mmc_probe(struct platfo
- mmc->max_blk_count = 8192;
- mmc->max_blk_size = 4096;
- mmc->max_segs = PAGE_SIZE / sizeof(struct sunxi_idma_des);
-- mmc->max_seg_size = (1 << host->cfg->idma_des_size_bits);
-+ mmc->max_seg_size = (1 << host->cfg->idma_des_size_bits) -
-+ SDXC_IDMAC_SIZE_ALIGN;
- mmc->max_req_size = mmc->max_seg_size * mmc->max_segs;
- /* 400kHz ~ 52MHz */
- mmc->f_min = 400000;
+++ /dev/null
-From a8e905fb3fd0d26f724646275b72a7363b2f03d8 Mon Sep 17 00:00:00 2001
-From: Max Fierke <max@maxfierke.com>
-Date: Wed, 1 Jun 2022 00:17:47 -0500
-Subject: [PATCH 015/117] dt-bindings: display: Add bindings for ClockworkPi
- CWD686
-
-The CWD686 is a 6.86" IPS LCD panel used as the primary
-display in the ClockworkPi DevTerm portable (all cores)
-
-Signed-off-by: Max Fierke <max@maxfierke.com>
-Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- .../display/panel/clockwork,cwd686.yaml | 62 +++++++++++++++++++
- 1 file changed, 62 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/display/panel/clockwork,cwd686.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/display/panel/clockwork,cwd686.yaml
-@@ -0,0 +1,62 @@
-+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/display/panel/clockwork,cwd686.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Clockwork CWD686 6.86" IPS LCD panel
-+
-+maintainers:
-+ - Max Fierke <max@maxfierke.com>
-+
-+description: |
-+ The Clockwork CWD686 is a 6.86" ICNL9707-based IPS LCD panel used within the
-+ Clockwork DevTerm series of portable devices. The panel has a 480x1280
-+ resolution and uses 24 bit RGB per pixel.
-+
-+allOf:
-+ - $ref: panel-common.yaml#
-+
-+properties:
-+ compatible:
-+ const: clockwork,cwd686
-+
-+ reg:
-+ description: DSI virtual channel used by that screen
-+ maxItems: 1
-+
-+ reset-gpios: true
-+ rotation: true
-+ backlight: true
-+ iovcc-supply: true
-+ vci-supply: true
-+
-+required:
-+ - compatible
-+ - reg
-+ - backlight
-+ - reset-gpios
-+
-+additionalProperties: false
-+
-+examples:
-+ - |
-+ #include <dt-bindings/gpio/gpio.h>
-+
-+ backlight: backlight {
-+ compatible = "gpio-backlight";
-+ gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ dsi {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ panel@0 {
-+ compatible = "clockwork,cwd686";
-+ reg = <0>;
-+ backlight = <&backlight>;
-+ reset-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
-+ rotation = <90>;
-+ };
-+ };
+++ /dev/null
-From d290546a88694dde6d2f64a973cd62ff2c69e27e Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Fri, 12 Aug 2022 01:59:35 -0500
-Subject: [PATCH 016/117] dt-bindings: display: Add Sitronix ST7701s panel
- binding
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- .../display/panel/sitronix,st7701s.yaml | 32 +++++++++++++++++++
- 1 file changed, 32 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/display/panel/sitronix,st7701s.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/display/panel/sitronix,st7701s.yaml
-@@ -0,0 +1,32 @@
-+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/display/panel/sitronix,st7701s.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Sitronix ST7701 based LCD panels
-+
-+maintainers:
-+ - Samuel Holland <samuel@sholland.org>
-+
-+description: |
-+ Panel used on Lichee RV 86 Panel
-+
-+allOf:
-+ - $ref: panel-common.yaml#
-+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
-+
-+properties:
-+ compatible:
-+ items:
-+ - const: sitronix,st7701s
-+
-+ backlight: true
-+
-+ reset-gpios: true
-+
-+required:
-+ - compatible
-+ - reset-gpios
-+
-+unevaluatedProperties: false
+++ /dev/null
-From 9d9b8bd567c30a821c82c27035243536c5234542 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Tue, 29 Mar 2022 22:47:57 -0500
-Subject: [PATCH 017/117] drm/panel: Add driver for ST7701s DPI LCD panel
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- drivers/gpu/drm/panel/Kconfig | 8 +
- drivers/gpu/drm/panel/Makefile | 1 +
- .../gpu/drm/panel/panel-sitronix-st7701s.c | 444 ++++++++++++++++++
- 3 files changed, 453 insertions(+)
- create mode 100644 drivers/gpu/drm/panel/panel-sitronix-st7701s.c
-
---- a/drivers/gpu/drm/panel/Kconfig
-+++ b/drivers/gpu/drm/panel/Kconfig
-@@ -608,6 +608,14 @@ config DRM_PANEL_SITRONIX_ST7701
- ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
- system interfaces.
-
-+config DRM_PANEL_SITRONIX_ST7701S
-+ tristate "Sitronix ST7701s panel driver"
-+ depends on OF
-+ depends on BACKLIGHT_CLASS_DEVICE
-+ help
-+ Say Y here if you want to enable support for the Sitronix
-+ ST7701s controller with a SPI interface.
-+
- config DRM_PANEL_SITRONIX_ST7703
- tristate "Sitronix ST7703 based MIPI touchscreen panels"
- depends on OF
---- a/drivers/gpu/drm/panel/Makefile
-+++ b/drivers/gpu/drm/panel/Makefile
-@@ -61,6 +61,7 @@ obj-$(CONFIG_DRM_PANEL_SHARP_LS037V7DW01
- obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o
- obj-$(CONFIG_DRM_PANEL_SHARP_LS060T1SX01) += panel-sharp-ls060t1sx01.o
- obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7701) += panel-sitronix-st7701.o
-+obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7701S) += panel-sitronix-st7701s.o
- obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7703) += panel-sitronix-st7703.o
- obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
- obj-$(CONFIG_DRM_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
---- /dev/null
-+++ b/drivers/gpu/drm/panel/panel-sitronix-st7701s.c
-@@ -0,0 +1,444 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ * Copyright (C) 2017 Free Electrons
-+ */
-+
-+#include <linux/delay.h>
-+#include <linux/gpio/consumer.h>
-+#include <linux/module.h>
-+#include <linux/spi/spi.h>
-+
-+#include <video/mipi_display.h>
-+
-+#include <drm/drm_device.h>
-+#include <drm/drm_modes.h>
-+#include <drm/drm_panel.h>
-+
-+struct st7701s {
-+ struct drm_panel panel;
-+ struct gpio_desc *reset;
-+ struct spi_device *spi;
-+};
-+
-+enum {
-+ ST7789V_COMMAND = 0 << 8,
-+ ST7789V_DATA = 1 << 8,
-+};
-+
-+#define LCD_WRITE_COMMAND(x) (ST7789V_COMMAND | (x))
-+#define LCD_WRITE_DATA(x) (ST7789V_DATA | (x))
-+
-+static const u16 st7701s_init_sequence_1[] = {
-+ LCD_WRITE_COMMAND(0xFF),
-+ LCD_WRITE_DATA(0x77),
-+ LCD_WRITE_DATA(0x01),
-+ LCD_WRITE_DATA(0x00),
-+ LCD_WRITE_DATA(0x00),
-+ LCD_WRITE_DATA(0x10),
-+
-+ LCD_WRITE_COMMAND(0xC0),
-+ LCD_WRITE_DATA(0x3B),
-+ LCD_WRITE_DATA(0x00),
-+
-+ LCD_WRITE_COMMAND(0xC1),
-+ LCD_WRITE_DATA(0x0D),
-+ LCD_WRITE_DATA(0x02),
-+
-+ LCD_WRITE_COMMAND(0xC2),
-+ LCD_WRITE_DATA(0x21),
-+ LCD_WRITE_DATA(0x08),
-+
-+ // RGB Interface Setting
-+ // LCD_WRITE_COMMAND(0xC3),
-+ // LCD_WRITE_DATA(0x02),
-+
-+ LCD_WRITE_COMMAND(0xCD),
-+ LCD_WRITE_DATA(0x18),//0F 08-OK D0-D18
-+
-+ LCD_WRITE_COMMAND(0xB0),
-+ LCD_WRITE_DATA(0x00),
-+ LCD_WRITE_DATA(0x11),
-+ LCD_WRITE_DATA(0x18),
-+ LCD_WRITE_DATA(0x0E),
-+ LCD_WRITE_DATA(0x11),
-+ LCD_WRITE_DATA(0x06),
-+ LCD_WRITE_DATA(0x07),
-+ LCD_WRITE_DATA(0x08),
-+ LCD_WRITE_DATA(0x07),
-+ LCD_WRITE_DATA(0x22),
-+ LCD_WRITE_DATA(0x04),
-+ LCD_WRITE_DATA(0x12),
-+ LCD_WRITE_DATA(0x0F),
-+ LCD_WRITE_DATA(0xAA),
-+ LCD_WRITE_DATA(0x31),
-+ LCD_WRITE_DATA(0x18),
-+
-+ LCD_WRITE_COMMAND(0xB1),
-+ LCD_WRITE_DATA(0x00),
-+ LCD_WRITE_DATA(0x11),
-+ LCD_WRITE_DATA(0x19),
-+ LCD_WRITE_DATA(0x0E),
-+ LCD_WRITE_DATA(0x12),
-+ LCD_WRITE_DATA(0x07),
-+ LCD_WRITE_DATA(0x08),
-+ LCD_WRITE_DATA(0x08),
-+ LCD_WRITE_DATA(0x08),
-+ LCD_WRITE_DATA(0x22),
-+ LCD_WRITE_DATA(0x04),
-+ LCD_WRITE_DATA(0x11),
-+ LCD_WRITE_DATA(0x11),
-+ LCD_WRITE_DATA(0xA9),
-+ LCD_WRITE_DATA(0x32),
-+ LCD_WRITE_DATA(0x18),
-+
-+ LCD_WRITE_COMMAND(0xFF),
-+ LCD_WRITE_DATA(0x77),
-+ LCD_WRITE_DATA(0x01),
-+ LCD_WRITE_DATA(0x00),
-+ LCD_WRITE_DATA(0x00),
-+ LCD_WRITE_DATA(0x11),
-+
-+ LCD_WRITE_COMMAND(0xB0),
-+ LCD_WRITE_DATA(0x60),
-+
-+ LCD_WRITE_COMMAND(0xB1),
-+ LCD_WRITE_DATA(0x30),
-+
-+ LCD_WRITE_COMMAND(0xB2),
-+ LCD_WRITE_DATA(0x87),
-+
-+ LCD_WRITE_COMMAND(0xB3),
-+ LCD_WRITE_DATA(0x80),
-+
-+ LCD_WRITE_COMMAND(0xB5),
-+ LCD_WRITE_DATA(0x49),
-+
-+ LCD_WRITE_COMMAND(0xB7),
-+ LCD_WRITE_DATA(0x85),
-+
-+ LCD_WRITE_COMMAND(0xB8),
-+ LCD_WRITE_DATA(0x21),
-+
-+ LCD_WRITE_COMMAND(0xC1),
-+ LCD_WRITE_DATA(0x78),
-+
-+ LCD_WRITE_COMMAND(0xC2),
-+ LCD_WRITE_DATA(0x78),
-+};
-+
-+static const u16 st7701s_init_sequence_2[] = {
-+ LCD_WRITE_COMMAND(0xE0),
-+ LCD_WRITE_DATA(0x00),
-+ LCD_WRITE_DATA(0x1B),
-+ LCD_WRITE_DATA(0x02),
-+
-+ LCD_WRITE_COMMAND(0xE1),
-+ LCD_WRITE_DATA(0x08),
-+ LCD_WRITE_DATA(0xA0),
-+ LCD_WRITE_DATA(0x00),
-+ LCD_WRITE_DATA(0x00),
-+ LCD_WRITE_DATA(0x07),
-+ LCD_WRITE_DATA(0xA0),
-+ LCD_WRITE_DATA(0x00),
-+ LCD_WRITE_DATA(0x00),
-+ LCD_WRITE_DATA(0x00),
-+ LCD_WRITE_DATA(0x44),
-+ LCD_WRITE_DATA(0x44),
-+
-+ LCD_WRITE_COMMAND(0xE2),
-+ LCD_WRITE_DATA(0x11),
-+ LCD_WRITE_DATA(0x11),
-+ LCD_WRITE_DATA(0x44),
-+ LCD_WRITE_DATA(0x44),
-+ LCD_WRITE_DATA(0xED),
-+ LCD_WRITE_DATA(0xA0),
-+ LCD_WRITE_DATA(0x00),
-+ LCD_WRITE_DATA(0x00),
-+ LCD_WRITE_DATA(0xEC),
-+ LCD_WRITE_DATA(0xA0),
-+ LCD_WRITE_DATA(0x00),
-+ LCD_WRITE_DATA(0x00),
-+
-+ LCD_WRITE_COMMAND(0xE3),
-+ LCD_WRITE_DATA(0x00),
-+ LCD_WRITE_DATA(0x00),
-+ LCD_WRITE_DATA(0x11),
-+ LCD_WRITE_DATA(0x11),
-+
-+ LCD_WRITE_COMMAND(0xE4),
-+ LCD_WRITE_DATA(0x44),
-+ LCD_WRITE_DATA(0x44),
-+
-+ LCD_WRITE_COMMAND(0xE5),
-+ LCD_WRITE_DATA(0x0A),
-+ LCD_WRITE_DATA(0xE9),
-+ LCD_WRITE_DATA(0xD8),
-+ LCD_WRITE_DATA(0xA0),
-+ LCD_WRITE_DATA(0x0C),
-+ LCD_WRITE_DATA(0xEB),
-+ LCD_WRITE_DATA(0xD8),
-+ LCD_WRITE_DATA(0xA0),
-+ LCD_WRITE_DATA(0x0E),
-+ LCD_WRITE_DATA(0xED),
-+ LCD_WRITE_DATA(0xD8),
-+ LCD_WRITE_DATA(0xA0),
-+ LCD_WRITE_DATA(0x10),
-+ LCD_WRITE_DATA(0xEF),
-+ LCD_WRITE_DATA(0xD8),
-+ LCD_WRITE_DATA(0xA0),
-+
-+ LCD_WRITE_COMMAND(0xE6),
-+ LCD_WRITE_DATA(0x00),
-+ LCD_WRITE_DATA(0x00),
-+ LCD_WRITE_DATA(0x11),
-+ LCD_WRITE_DATA(0x11),
-+
-+ LCD_WRITE_COMMAND(0xE7),
-+ LCD_WRITE_DATA(0x44),
-+ LCD_WRITE_DATA(0x44),
-+
-+ LCD_WRITE_COMMAND(0xE8),
-+ LCD_WRITE_DATA(0x09),
-+ LCD_WRITE_DATA(0xE8),
-+ LCD_WRITE_DATA(0xD8),
-+ LCD_WRITE_DATA(0xA0),
-+ LCD_WRITE_DATA(0x0B),
-+ LCD_WRITE_DATA(0xEA),
-+ LCD_WRITE_DATA(0xD8),
-+ LCD_WRITE_DATA(0xA0),
-+ LCD_WRITE_DATA(0x0D),
-+ LCD_WRITE_DATA(0xEC),
-+ LCD_WRITE_DATA(0xD8),
-+ LCD_WRITE_DATA(0xA0),
-+ LCD_WRITE_DATA(0x0F),
-+ LCD_WRITE_DATA(0xEE),
-+ LCD_WRITE_DATA(0xD8),
-+ LCD_WRITE_DATA(0xA0),
-+
-+ LCD_WRITE_COMMAND(0xEB),
-+ LCD_WRITE_DATA(0x02),
-+ LCD_WRITE_DATA(0x00),
-+ LCD_WRITE_DATA(0xE4),
-+ LCD_WRITE_DATA(0xE4),
-+ LCD_WRITE_DATA(0x88),
-+ LCD_WRITE_DATA(0x00),
-+ LCD_WRITE_DATA(0x40),
-+
-+ LCD_WRITE_COMMAND(0xEC),
-+ LCD_WRITE_DATA(0x3C),
-+ LCD_WRITE_DATA(0x00),
-+
-+ LCD_WRITE_COMMAND(0xED),
-+ LCD_WRITE_DATA(0xAB),
-+ LCD_WRITE_DATA(0x89),
-+ LCD_WRITE_DATA(0x76),
-+ LCD_WRITE_DATA(0x54),
-+ LCD_WRITE_DATA(0x02),
-+ LCD_WRITE_DATA(0xFF),
-+ LCD_WRITE_DATA(0xFF),
-+ LCD_WRITE_DATA(0xFF),
-+ LCD_WRITE_DATA(0xFF),
-+ LCD_WRITE_DATA(0xFF),
-+ LCD_WRITE_DATA(0xFF),
-+ LCD_WRITE_DATA(0x20),
-+ LCD_WRITE_DATA(0x45),
-+ LCD_WRITE_DATA(0x67),
-+ LCD_WRITE_DATA(0x98),
-+ LCD_WRITE_DATA(0xBA),
-+
-+ LCD_WRITE_COMMAND(0xFF),
-+ LCD_WRITE_DATA(0x77),
-+ LCD_WRITE_DATA(0x01),
-+ LCD_WRITE_DATA(0x00),
-+ LCD_WRITE_DATA(0x00),
-+ LCD_WRITE_DATA(0x00),
-+
-+ LCD_WRITE_COMMAND(MIPI_DCS_SET_PIXEL_FORMAT),
-+ LCD_WRITE_DATA(0x66),
-+
-+ LCD_WRITE_COMMAND(MIPI_DCS_SET_ADDRESS_MODE),
-+ LCD_WRITE_DATA(0x00),
-+
-+ LCD_WRITE_COMMAND(MIPI_DCS_ENTER_INVERT_MODE),
-+
-+ LCD_WRITE_COMMAND(MIPI_DCS_EXIT_SLEEP_MODE),
-+};
-+
-+static const u16 st7701s_enable_sequence[] = {
-+ LCD_WRITE_COMMAND(MIPI_DCS_SET_DISPLAY_ON),
-+};
-+
-+static const u16 st7701s_disable_sequence[] = {
-+ LCD_WRITE_COMMAND(MIPI_DCS_SET_DISPLAY_OFF),
-+};
-+
-+static inline struct st7701s *panel_to_st7701s(struct drm_panel *panel)
-+{
-+ return container_of(panel, struct st7701s, panel);
-+}
-+
-+static int st7701s_spi_write(struct st7701s *ctx, const u16 *data, size_t size)
-+{
-+ struct spi_transfer xfer = { };
-+ struct spi_message msg;
-+
-+ spi_message_init(&msg);
-+
-+ xfer.tx_buf = data;
-+ xfer.bits_per_word = 9;
-+ xfer.len = size;
-+
-+ spi_message_add_tail(&xfer, &msg);
-+ return spi_sync(ctx->spi, &msg);
-+}
-+
-+static const struct drm_display_mode default_mode = {
-+ .clock = 19800,
-+ .hdisplay = 480,
-+ .hsync_start = 480 + 60,
-+ .hsync_end = 480 + 60 + 12,
-+ .htotal = 480 + 60 + 12 + 60,
-+ .vdisplay = 480,
-+ .vsync_start = 480 + 18,
-+ .vsync_end = 480 + 18 + 4,
-+ .vtotal = 480 + 18 + 4 + 18,
-+};
-+
-+static int st7701s_get_modes(struct drm_panel *panel,
-+ struct drm_connector *connector)
-+{
-+ struct drm_display_mode *mode;
-+
-+ mode = drm_mode_duplicate(connector->dev, &default_mode);
-+ if (!mode)
-+ return -ENOMEM;
-+
-+ drm_mode_set_name(mode);
-+
-+ mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
-+ drm_mode_probed_add(connector, mode);
-+
-+ connector->display_info.width_mm = 70;
-+ connector->display_info.height_mm = 72;
-+
-+ return 1;
-+}
-+
-+static int st7701s_prepare(struct drm_panel *panel)
-+{
-+ struct st7701s *ctx = panel_to_st7701s(panel);
-+
-+ gpiod_set_value_cansleep(ctx->reset, 1);
-+ msleep(20);
-+
-+ gpiod_set_value_cansleep(ctx->reset, 0);
-+ msleep(20);
-+
-+ st7701s_spi_write(ctx, st7701s_init_sequence_1,
-+ sizeof(st7701s_init_sequence_1));
-+ msleep(20);
-+
-+ st7701s_spi_write(ctx, st7701s_init_sequence_2,
-+ sizeof(st7701s_init_sequence_2));
-+ msleep(120);
-+
-+ return 0;
-+}
-+
-+static int st7701s_enable(struct drm_panel *panel)
-+{
-+ struct st7701s *ctx = panel_to_st7701s(panel);
-+
-+ st7701s_spi_write(ctx, st7701s_enable_sequence,
-+ sizeof(st7701s_enable_sequence));
-+ msleep(20);
-+
-+ return 0;
-+}
-+
-+static int st7701s_disable(struct drm_panel *panel)
-+{
-+ struct st7701s *ctx = panel_to_st7701s(panel);
-+
-+ st7701s_spi_write(ctx, st7701s_disable_sequence,
-+ sizeof(st7701s_disable_sequence));
-+
-+ return 0;
-+}
-+
-+static int st7701s_unprepare(struct drm_panel *panel)
-+{
-+ return 0;
-+}
-+
-+static const struct drm_panel_funcs st7701s_drm_funcs = {
-+ .disable = st7701s_disable,
-+ .enable = st7701s_enable,
-+ .get_modes = st7701s_get_modes,
-+ .prepare = st7701s_prepare,
-+ .unprepare = st7701s_unprepare,
-+};
-+
-+static int st7701s_probe(struct spi_device *spi)
-+{
-+ struct device *dev = &spi->dev;
-+ struct st7701s *ctx;
-+ int ret;
-+
-+ ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
-+ if (!ctx)
-+ return -ENOMEM;
-+
-+ spi_set_drvdata(spi, ctx);
-+ ctx->spi = spi;
-+
-+ ctx->reset = devm_gpiod_get(&spi->dev, "reset", GPIOD_OUT_LOW);
-+ if (IS_ERR(ctx->reset)) {
-+ dev_err(&spi->dev, "Couldn't get our reset line\n");
-+ return PTR_ERR(ctx->reset);
-+ }
-+
-+ drm_panel_init(&ctx->panel, dev, &st7701s_drm_funcs,
-+ DRM_MODE_CONNECTOR_DPI);
-+
-+ ret = drm_panel_of_backlight(&ctx->panel);
-+ if (ret)
-+ return ret;
-+
-+ drm_panel_add(&ctx->panel);
-+
-+ return 0;
-+}
-+
-+static void st7701s_remove(struct spi_device *spi)
-+{
-+ struct st7701s *ctx = spi_get_drvdata(spi);
-+
-+ drm_panel_remove(&ctx->panel);
-+}
-+
-+static const struct of_device_id st7701s_of_match[] = {
-+ { .compatible = "sitronix,st7701s" },
-+ { }
-+};
-+MODULE_DEVICE_TABLE(of, st7701s_of_match);
-+
-+static const struct spi_device_id st7701s_ids[] = {
-+ { "st7701s" },
-+ { }
-+};
-+MODULE_DEVICE_TABLE(spi, st7701s_ids);
-+
-+static struct spi_driver st7701s_driver = {
-+ .probe = st7701s_probe,
-+ .remove = st7701s_remove,
-+ .driver = {
-+ .name = "st7701s",
-+ .of_match_table = st7701s_of_match,
-+ },
-+};
-+module_spi_driver(st7701s_driver);
-+
-+MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
-+MODULE_DESCRIPTION("Sitronix ST7701s LCD Driver");
-+MODULE_LICENSE("GPL v2");
+++ /dev/null
-From db71abf941d25b92b2117780d3771197417d1c81 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 31 Jul 2022 20:34:20 -0500
-Subject: [PATCH 018/117] nvmem: sunxi_sid: Drop the workaround on A64
-
-Now that the SRAM readout code is fixed by using 32-bit accesses, it
-always returns the same values as register readout, so the A64 variant
-no longer needs the workaround. This makes the D1 variant structure
-redundant, so remove it.
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- drivers/nvmem/sunxi_sid.c | 8 +-------
- 1 file changed, 1 insertion(+), 7 deletions(-)
-
---- a/drivers/nvmem/sunxi_sid.c
-+++ b/drivers/nvmem/sunxi_sid.c
-@@ -196,15 +196,9 @@ static const struct sunxi_sid_cfg sun8i_
- .need_register_readout = true,
- };
-
--static const struct sunxi_sid_cfg sun20i_d1_cfg = {
-- .value_offset = 0x200,
-- .size = 0x100,
--};
--
- static const struct sunxi_sid_cfg sun50i_a64_cfg = {
- .value_offset = 0x200,
- .size = 0x100,
-- .need_register_readout = true,
- };
-
- static const struct sunxi_sid_cfg sun50i_h6_cfg = {
-@@ -217,7 +211,7 @@ static const struct of_device_id sunxi_s
- { .compatible = "allwinner,sun7i-a20-sid", .data = &sun7i_a20_cfg },
- { .compatible = "allwinner,sun8i-a83t-sid", .data = &sun50i_a64_cfg },
- { .compatible = "allwinner,sun8i-h3-sid", .data = &sun8i_h3_cfg },
-- { .compatible = "allwinner,sun20i-d1-sid", .data = &sun20i_d1_cfg },
-+ { .compatible = "allwinner,sun20i-d1-sid", .data = &sun50i_a64_cfg },
- { .compatible = "allwinner,sun50i-a64-sid", .data = &sun50i_a64_cfg },
- { .compatible = "allwinner,sun50i-h5-sid", .data = &sun50i_a64_cfg },
- { .compatible = "allwinner,sun50i-h6-sid", .data = &sun50i_h6_cfg },
+++ /dev/null
-From d03341ef7acb64803ade6b173d24f49ffa6149a3 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Tue, 2 Aug 2022 00:29:32 -0500
-Subject: [PATCH 019/117] dt-bindings: nvmem: Allow bit offsets greater than a
- byte
-
-Some NVMEM devices contain cells which do not start at a multiple of the
-device's stride. However, the "reg" property of a cell must be aligned
-to its provider device's stride.
-
-These cells can be represented in the DT using the "bits" property if
-that property allows offsets up to the full stride. 63 is chosen
-assuming that NVMEM devices will not have strides larger than 8 bytes.
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- Documentation/devicetree/bindings/nvmem/nvmem.yaml | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/Documentation/devicetree/bindings/nvmem/nvmem.yaml
-+++ b/Documentation/devicetree/bindings/nvmem/nvmem.yaml
-@@ -53,7 +53,7 @@ patternProperties:
- $ref: /schemas/types.yaml#/definitions/uint32-array
- items:
- - minimum: 0
-- maximum: 7
-+ maximum: 63
- description:
- Offset in bit within the address range specified by reg.
- - minimum: 1
+++ /dev/null
-From f666d95c1443854555044d3d4b52c463cf845ccc Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 17 Jul 2022 20:33:40 -0500
-Subject: [PATCH 020/117] regulator: dt-bindings: Add Allwinner D1 LDOs
-
-The Allwinner D1 SoC contains two pairs of in-package LDOs. One pair is
-for general purpose use. LDOA generally powers the board's 1.8 V rail.
-LDOB generally powers the in-package DRAM, where applicable.
-
-The other pair of LDOs powers the analog power domains inside the SoC,
-including the audio codec, thermal sensor, and ADCs. These LDOs require
-a 0.9 V bandgap voltage reference. The calibration value for the voltage
-reference is stored in an eFuse, accessed via an NVMEM cell.
-
-Neither LDO control register is in its own MMIO range; instead, each
-regulator device relies on a regmap/syscon exported by its parent.
-
-Series-changes: 2
- - Remove syscon property from bindings
- - Update binding examples to fix warnings and provide context
-
-Series-changes: 3
- - Add "reg" property to bindings
- - Add "unevaluatedProperties: true" to regulator nodes
- - Minor changes to regulator node name patterns
- - Remove system-ldos example (now added in patch 3)
-
-Series-changes: 4
- - Fix the order of the maintainer/description sections
- - Replace unevaluatedProperties with "additionalProperties: false"
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- .../allwinner,sun20i-d1-analog-ldos.yaml | 74 +++++++++++++++++++
- .../allwinner,sun20i-d1-system-ldos.yaml | 37 ++++++++++
- 2 files changed, 111 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/regulator/allwinner,sun20i-d1-analog-ldos.yaml
- create mode 100644 Documentation/devicetree/bindings/regulator/allwinner,sun20i-d1-system-ldos.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/regulator/allwinner,sun20i-d1-analog-ldos.yaml
-@@ -0,0 +1,74 @@
-+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/regulator/allwinner,sun20i-d1-analog-ldos.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Allwinner D1 Analog LDOs
-+
-+maintainers:
-+ - Samuel Holland <samuel@sholland.org>
-+
-+description:
-+ Allwinner D1 contains a set of LDOs which are designed to supply analog power
-+ inside and outside the SoC. They are controlled by a register within the audio
-+ codec MMIO space, but which is not part of the audio codec clock/reset domain.
-+
-+properties:
-+ compatible:
-+ enum:
-+ - allwinner,sun20i-d1-analog-ldos
-+
-+ reg:
-+ maxItems: 1
-+
-+ nvmem-cells:
-+ items:
-+ - description: NVMEM cell for the calibrated bandgap reference trim value
-+
-+ nvmem-cell-names:
-+ items:
-+ - const: bg_trim
-+
-+patternProperties:
-+ "^(a|hp)ldo$":
-+ type: object
-+ $ref: regulator.yaml#
-+ unevaluatedProperties: false
-+
-+required:
-+ - compatible
-+ - reg
-+ - nvmem-cells
-+ - nvmem-cell-names
-+
-+additionalProperties: false
-+
-+examples:
-+ - |
-+ audio-codec@2030000 {
-+ compatible = "simple-mfd", "syscon";
-+ reg = <0x2030000 0x1000>;
-+ ranges;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ regulators@2030348 {
-+ compatible = "allwinner,sun20i-d1-analog-ldos";
-+ reg = <0x2030348 0x4>;
-+ nvmem-cells = <&bg_trim>;
-+ nvmem-cell-names = "bg_trim";
-+
-+ reg_aldo: aldo {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ };
-+
-+ reg_hpldo: hpldo {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ };
-+ };
-+ };
-+
-+...
---- /dev/null
-+++ b/Documentation/devicetree/bindings/regulator/allwinner,sun20i-d1-system-ldos.yaml
-@@ -0,0 +1,37 @@
-+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/regulator/allwinner,sun20i-d1-system-ldos.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Allwinner D1 System LDOs
-+
-+maintainers:
-+ - Samuel Holland <samuel@sholland.org>
-+
-+description:
-+ Allwinner D1 contains a pair of general-purpose LDOs which are designed to
-+ supply power inside and outside the SoC. They are controlled by a register
-+ within the system control MMIO space.
-+
-+properties:
-+ compatible:
-+ enum:
-+ - allwinner,sun20i-d1-system-ldos
-+
-+ reg:
-+ maxItems: 1
-+
-+patternProperties:
-+ "^ldo[ab]$":
-+ type: object
-+ $ref: regulator.yaml#
-+ unevaluatedProperties: false
-+
-+required:
-+ - compatible
-+ - reg
-+
-+additionalProperties: false
-+
-+...
+++ /dev/null
-From ad842bfb2eb10a75050dd69145ca59de982eb0e9 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 17 Jul 2022 11:46:52 -0500
-Subject: [PATCH 021/117] regulator: sun20i: Add support for Allwinner D1 LDOs
-
-D1 contains two pairs of LDOs. Since they have similar bindings, and
-they always exist together, put them in a single driver.
-
-The analog LDOs are relatively boring, with a single linear range. Their
-one quirk is that a bandgap reference must be calibrated for them to
-produce the correct voltage.
-
-The system LDOs have the complication that their voltage step is not an
-integer, so a custom .list_voltage is needed to get the rounding right.
-
-Series-changes: 2
- - Use decimal numbers for .n_voltages instead of field widths
- - Get the regmap from the parent device instead of a property/phandle
-
-Series-changes: 3
- - Adjust control flow in sun20i_regulator_get_regmap() for clarity
-
-Reviewed-by: Heiko Stuebner <heiko@sntech.de>
-Tested-by: Heiko Stuebner <heiko@sntech.de>
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- drivers/regulator/Kconfig | 8 +
- drivers/regulator/Makefile | 1 +
- drivers/regulator/sun20i-regulator.c | 232 +++++++++++++++++++++++++++
- 3 files changed, 241 insertions(+)
- create mode 100644 drivers/regulator/sun20i-regulator.c
-
---- a/drivers/regulator/Kconfig
-+++ b/drivers/regulator/Kconfig
-@@ -1280,6 +1280,14 @@ config REGULATOR_STW481X_VMMC
- This driver supports the internal VMMC regulator in the STw481x
- PMIC chips.
-
-+config REGULATOR_SUN20I
-+ tristate "Allwinner D1 internal LDOs"
-+ depends on ARCH_SUNXI || COMPILE_TEST
-+ depends on MFD_SYSCON && NVMEM
-+ default ARCH_SUNXI
-+ help
-+ This driver supports the internal LDOs in the Allwinner D1 SoC.
-+
- config REGULATOR_SY7636A
- tristate "Silergy SY7636A voltage regulator"
- depends on MFD_SY7636A
---- a/drivers/regulator/Makefile
-+++ b/drivers/regulator/Makefile
-@@ -150,6 +150,7 @@ obj-$(CONFIG_REGULATOR_STM32_VREFBUF) +=
- obj-$(CONFIG_REGULATOR_STM32_PWR) += stm32-pwr.o
- obj-$(CONFIG_REGULATOR_STPMIC1) += stpmic1_regulator.o
- obj-$(CONFIG_REGULATOR_STW481X_VMMC) += stw481x-vmmc.o
-+obj-$(CONFIG_REGULATOR_SUN20I) += sun20i-regulator.o
- obj-$(CONFIG_REGULATOR_SY7636A) += sy7636a-regulator.o
- obj-$(CONFIG_REGULATOR_SY8106A) += sy8106a-regulator.o
- obj-$(CONFIG_REGULATOR_SY8824X) += sy8824x.o
---- /dev/null
-+++ b/drivers/regulator/sun20i-regulator.c
-@@ -0,0 +1,232 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+//
-+// Copyright (c) 2021-2022 Samuel Holland <samuel@sholland.org>
-+//
-+
-+#include <linux/mfd/syscon.h>
-+#include <linux/module.h>
-+#include <linux/nvmem-consumer.h>
-+#include <linux/of_device.h>
-+#include <linux/platform_device.h>
-+#include <linux/regmap.h>
-+#include <linux/regulator/driver.h>
-+
-+#define SUN20I_POWER_REG 0x348
-+
-+#define SUN20I_SYS_LDO_CTRL_REG 0x150
-+
-+struct sun20i_regulator_data {
-+ int (*init)(struct device *dev,
-+ struct regmap *regmap);
-+ const struct regulator_desc *descs;
-+ unsigned int ndescs;
-+};
-+
-+static int sun20i_d1_analog_ldos_init(struct device *dev, struct regmap *regmap)
-+{
-+ u8 bg_trim;
-+ int ret;
-+
-+ ret = nvmem_cell_read_u8(dev, "bg_trim", &bg_trim);
-+ if (ret)
-+ return dev_err_probe(dev, ret, "Failed to get bg_trim value\n");
-+
-+ /* The default value corresponds to 900 mV. */
-+ if (!bg_trim)
-+ bg_trim = 0x19;
-+
-+ return regmap_update_bits(regmap, SUN20I_POWER_REG,
-+ GENMASK(7, 0), bg_trim);
-+}
-+
-+static const struct regulator_ops sun20i_d1_analog_ldo_ops = {
-+ .list_voltage = regulator_list_voltage_linear,
-+ .map_voltage = regulator_map_voltage_linear,
-+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
-+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
-+ .enable = regulator_enable_regmap,
-+ .disable = regulator_disable_regmap,
-+ .is_enabled = regulator_is_enabled_regmap,
-+};
-+
-+static const struct regulator_desc sun20i_d1_analog_ldo_descs[] = {
-+ {
-+ .name = "aldo",
-+ .supply_name = "vdd33",
-+ .of_match = "aldo",
-+ .ops = &sun20i_d1_analog_ldo_ops,
-+ .type = REGULATOR_VOLTAGE,
-+ .owner = THIS_MODULE,
-+ .n_voltages = 8,
-+ .min_uV = 1650000,
-+ .uV_step = 50000,
-+ .vsel_reg = SUN20I_POWER_REG,
-+ .vsel_mask = GENMASK(14, 12),
-+ .enable_reg = SUN20I_POWER_REG,
-+ .enable_mask = BIT(31),
-+ },
-+ {
-+ .name = "hpldo",
-+ .supply_name = "hpldoin",
-+ .of_match = "hpldo",
-+ .ops = &sun20i_d1_analog_ldo_ops,
-+ .type = REGULATOR_VOLTAGE,
-+ .owner = THIS_MODULE,
-+ .n_voltages = 8,
-+ .min_uV = 1650000,
-+ .uV_step = 50000,
-+ .vsel_reg = SUN20I_POWER_REG,
-+ .vsel_mask = GENMASK(10, 8),
-+ .enable_reg = SUN20I_POWER_REG,
-+ .enable_mask = BIT(30),
-+ },
-+};
-+
-+static const struct sun20i_regulator_data sun20i_d1_analog_ldos = {
-+ .init = sun20i_d1_analog_ldos_init,
-+ .descs = sun20i_d1_analog_ldo_descs,
-+ .ndescs = ARRAY_SIZE(sun20i_d1_analog_ldo_descs),
-+};
-+
-+/* regulator_list_voltage_linear() modified for the non-integral uV_step. */
-+static int sun20i_d1_system_ldo_list_voltage(struct regulator_dev *rdev,
-+ unsigned int selector)
-+{
-+ const struct regulator_desc *desc = rdev->desc;
-+ unsigned int uV;
-+
-+ if (selector >= desc->n_voltages)
-+ return -EINVAL;
-+
-+ uV = desc->min_uV + (desc->uV_step * selector);
-+
-+ /* Produce correctly-rounded absolute voltages. */
-+ return uV + ((selector + 1 + (desc->min_uV % 4)) / 3);
-+}
-+
-+static const struct regulator_ops sun20i_d1_system_ldo_ops = {
-+ .list_voltage = sun20i_d1_system_ldo_list_voltage,
-+ .map_voltage = regulator_map_voltage_ascend,
-+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
-+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
-+};
-+
-+static const struct regulator_desc sun20i_d1_system_ldo_descs[] = {
-+ {
-+ .name = "ldoa",
-+ .supply_name = "ldo-in",
-+ .of_match = "ldoa",
-+ .ops = &sun20i_d1_system_ldo_ops,
-+ .type = REGULATOR_VOLTAGE,
-+ .owner = THIS_MODULE,
-+ .n_voltages = 32,
-+ .min_uV = 1600000,
-+ .uV_step = 13333, /* repeating */
-+ .vsel_reg = SUN20I_SYS_LDO_CTRL_REG,
-+ .vsel_mask = GENMASK(7, 0),
-+ },
-+ {
-+ .name = "ldob",
-+ .supply_name = "ldo-in",
-+ .of_match = "ldob",
-+ .ops = &sun20i_d1_system_ldo_ops,
-+ .type = REGULATOR_VOLTAGE,
-+ .owner = THIS_MODULE,
-+ .n_voltages = 64,
-+ .min_uV = 1166666,
-+ .uV_step = 13333, /* repeating */
-+ .vsel_reg = SUN20I_SYS_LDO_CTRL_REG,
-+ .vsel_mask = GENMASK(15, 8),
-+ },
-+};
-+
-+static const struct sun20i_regulator_data sun20i_d1_system_ldos = {
-+ .descs = sun20i_d1_system_ldo_descs,
-+ .ndescs = ARRAY_SIZE(sun20i_d1_system_ldo_descs),
-+};
-+
-+static const struct of_device_id sun20i_regulator_of_match[] = {
-+ {
-+ .compatible = "allwinner,sun20i-d1-analog-ldos",
-+ .data = &sun20i_d1_analog_ldos,
-+ },
-+ {
-+ .compatible = "allwinner,sun20i-d1-system-ldos",
-+ .data = &sun20i_d1_system_ldos,
-+ },
-+ { },
-+};
-+MODULE_DEVICE_TABLE(of, sun20i_regulator_of_match);
-+
-+static struct regmap *sun20i_regulator_get_regmap(struct device *dev)
-+{
-+ struct regmap *regmap;
-+
-+ /*
-+ * First try the syscon interface. The system control device is not
-+ * compatible with "syscon", so fall back to getting the regmap from
-+ * its platform device. This is ugly, but required for devicetree
-+ * backward compatibility.
-+ */
-+ regmap = syscon_node_to_regmap(dev->parent->of_node);
-+ if (!IS_ERR(regmap))
-+ return regmap;
-+
-+ regmap = dev_get_regmap(dev->parent, NULL);
-+ if (regmap)
-+ return regmap;
-+
-+ return ERR_PTR(-EPROBE_DEFER);
-+}
-+
-+static int sun20i_regulator_probe(struct platform_device *pdev)
-+{
-+ const struct sun20i_regulator_data *data;
-+ struct device *dev = &pdev->dev;
-+ struct regulator_config config;
-+ struct regmap *regmap;
-+ int ret;
-+
-+ data = of_device_get_match_data(dev);
-+ if (!data)
-+ return -EINVAL;
-+
-+ regmap = sun20i_regulator_get_regmap(dev);
-+ if (IS_ERR(regmap))
-+ return dev_err_probe(dev, PTR_ERR(regmap), "Failed to get regmap\n");
-+
-+ if (data->init) {
-+ ret = data->init(dev, regmap);
-+ if (ret)
-+ return ret;
-+ }
-+
-+ config = (struct regulator_config) {
-+ .dev = dev,
-+ .regmap = regmap,
-+ };
-+
-+ for (unsigned int i = 0; i < data->ndescs; ++i) {
-+ const struct regulator_desc *desc = &data->descs[i];
-+ struct regulator_dev *rdev;
-+
-+ rdev = devm_regulator_register(dev, desc, &config);
-+ if (IS_ERR(rdev))
-+ return PTR_ERR(rdev);
-+ }
-+
-+ return 0;
-+}
-+
-+static struct platform_driver sun20i_regulator_driver = {
-+ .probe = sun20i_regulator_probe,
-+ .driver = {
-+ .name = "sun20i-regulator",
-+ .of_match_table = sun20i_regulator_of_match,
-+ },
-+};
-+module_platform_driver(sun20i_regulator_driver);
-+
-+MODULE_AUTHOR("Samuel Holland <samuel@sholland.org>");
-+MODULE_DESCRIPTION("Allwinner D1 internal LDO driver");
-+MODULE_LICENSE("GPL");
+++ /dev/null
-From 52c6979628d596018e9259767bff4def25e449dc Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Mon, 1 Aug 2022 23:57:19 -0500
-Subject: [PATCH 022/117] dt-bindings: sram: sunxi-sram: Add optional
- regulators child
-
-Some sunxi SoCs have in-package regulators controlled by a register in
-the system control MMIO block. Allow a child node for these regulators
-in addition to SRAM child nodes.
-
-Commit-changes: 2
- - New patch for v2
-
-Series-changes: 3
- - Require the regulators node to have a unit address
- - Reference the regulator schema from the SRAM controller schema
- - Move the system LDOs example to the SRAM controller schema
- - Reorder the patches so the example passes validation
-
-Series-changes: 4
- - Remove unevaluatedProperties from regulators schema reference
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- .../allwinner,sun4i-a10-system-control.yaml | 28 +++++++++++++++++++
- 1 file changed, 28 insertions(+)
-
---- a/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml
-+++ b/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml
-@@ -56,6 +56,9 @@ properties:
- ranges: true
-
- patternProperties:
-+ "^regulators@[0-9a-f]+$":
-+ $ref: /schemas/regulator/allwinner,sun20i-d1-system-ldos.yaml#
-+
- "^sram@[a-z0-9]+":
- type: object
-
-@@ -130,3 +133,28 @@ examples:
- };
- };
- };
-+
-+ - |
-+ syscon@3000000 {
-+ compatible = "allwinner,sun20i-d1-system-control";
-+ reg = <0x3000000 0x1000>;
-+ ranges;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ regulators@3000150 {
-+ compatible = "allwinner,sun20i-d1-system-ldos";
-+ reg = <0x3000150 0x4>;
-+
-+ reg_ldoa: ldoa {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ };
-+
-+ reg_ldob: ldob {
-+ regulator-name = "vcc-dram";
-+ regulator-min-microvolt = <1500000>;
-+ regulator-max-microvolt = <1500000>;
-+ };
-+ };
-+ };
+++ /dev/null
-From 1946ff7ee38c994ae3eb9968c5b51695c0df2cf7 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Tue, 2 Aug 2022 00:01:21 -0500
-Subject: [PATCH 023/117] soc: sunxi: sram: Only iterate over SRAM children
-
-Now that a "regulators" child is accepted by the controller binding, the
-debugfs show routine must be explicitly limited to "sram" children.
-
-Series-to: Liam Girdwood <lgirdwood@gmail.com>
-Series-to: Mark Brown <broonie@kernel.org>
-Series-to: Chen-Yu Tsai <wens@csie.org>
-Series-to: Jernej Skrabec <jernej.skrabec@gmail.com>
-Series-to: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
-Series-to: Rob Herring <robh+dt@kernel.org>
-
-Commit-changes: 2
- - New patch for v2
-
-Series-version: 4
-
-Cover-letter:
-regulator: Add support for Allwinner D1 LDOs
-This series adds bindings and a driver for the two pairs of LDOs
-inside the Allwinner D1 SoC.
-
-A binding and driver change is required for the SRAM controller, to
-accept the regulators device as its child node. The new example in the
-SRAM controller binding uses the compatible string added in this series:
-https://lore.kernel.org/lkml/20220815041248.53268-1-samuel@sholland.org/
-END
-
-Reviewed-by: Heiko Stuebner <heiko@sntech.de>
-Tested-by: Heiko Stuebner <heiko@sntech.de>
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- drivers/soc/sunxi/sunxi_sram.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/soc/sunxi/sunxi_sram.c
-+++ b/drivers/soc/sunxi/sunxi_sram.c
-@@ -120,6 +120,9 @@ static int sunxi_sram_show(struct seq_fi
- seq_puts(s, "--------------------\n\n");
-
- for_each_child_of_node(sram_dev->of_node, sram_node) {
-+ if (!of_node_name_eq(sram_node, "sram"))
-+ continue;
-+
- sram_addr_p = of_get_address(sram_node, 0, NULL, NULL);
-
- seq_printf(s, "sram@%08x\n",
+++ /dev/null
-From 25727569379b42593b55cfb743b7eff4cfa1cce2 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 14 Aug 2022 23:45:50 -0500
-Subject: [PATCH 024/117] MAINTAINERS: Match the sun20i family of Allwinner
- SoCs
-
-Allwinner sunxi SoCs with a RISC-V CPU use the sun20i designator. Match
-that pattern in addition to the designators for 32 and 64-bit ARM SoCs.
-
-Reviewed-by: Heiko Stuebner <heiko@sntech.de>
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- MAINTAINERS | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -1828,7 +1828,7 @@ F: drivers/pinctrl/sunxi/
- F: drivers/soc/sunxi/
- N: allwinner
- N: sun[x456789]i
--N: sun50i
-+N: sun[25]0i
-
- ARM/Amlogic Meson SoC CLOCK FRAMEWORK
- M: Neil Armstrong <neil.armstrong@linaro.org>
+++ /dev/null
-From 4ae663dbc373f5690581cee16d3667693eb9d73e Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 16 May 2021 14:05:17 -0500
-Subject: [PATCH 025/117] dt-bindings: riscv: Add T-HEAD C906 and C910
- compatibles
-
-The C906 and C910 are RISC-V CPU cores from T-HEAD Semiconductor.
-Notably, the C906 core is used in the Allwinner D1 SoC.
-
-Acked-by: Rob Herring <robh@kernel.org>
-Reviewed-by: Heiko Stuebner <heiko@sntech.de>
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- Documentation/devicetree/bindings/riscv/cpus.yaml | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/Documentation/devicetree/bindings/riscv/cpus.yaml
-+++ b/Documentation/devicetree/bindings/riscv/cpus.yaml
-@@ -39,6 +39,8 @@ properties:
- - sifive,u5
- - sifive,u7
- - canaan,k210
-+ - thead,c906
-+ - thead,c910
- - const: riscv
- - items:
- - enum:
+++ /dev/null
-From d0c24deb787a95515d355eea68e0402bfec77f75 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 17 Jul 2022 14:42:05 -0500
-Subject: [PATCH 026/117] dt-bindings: vendor-prefixes: Add Allwinner D1 board
- vendors
-
-Some boards using the Allwinner D1 SoC are made by vendors not
-previously documented.
-
-Clockwork Tech LLC (https://www.clockworkpi.com/) manufactures the
-ClockworkPi and DevTerm boards.
-
-Beijing Widora Technology Co., Ltd. (https://mangopi.cc/) manufactures
-the MangoPi family of boards.
-
-Acked-by: Rob Herring <robh@kernel.org>
-Reviewed-by: Heiko Stuebner <heiko@sntech.de>
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- Documentation/devicetree/bindings/vendor-prefixes.yaml | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
-+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
-@@ -260,6 +260,8 @@ patternProperties:
- description: Cirrus Logic, Inc.
- "^cisco,.*":
- description: Cisco Systems, Inc.
-+ "^clockwork,.*":
-+ description: Clockwork Tech LLC
- "^cloudengines,.*":
- description: Cloud Engines, Inc.
- "^cnm,.*":
-@@ -1424,6 +1426,8 @@ patternProperties:
- description: Shenzhen whwave Electronics, Inc.
- "^wi2wi,.*":
- description: Wi2Wi, Inc.
-+ "^widora,.*":
-+ description: Beijing Widora Technology Co., Ltd.
- "^wiligear,.*":
- description: Wiligear, Ltd.
- "^willsemi,.*":
+++ /dev/null
-From 4d7c04f210dd401f3560a7f53c78d6e058d182e2 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Wed, 29 Jun 2022 00:26:39 -0500
-Subject: [PATCH 027/117] dt-bindings: riscv: Add Allwinner D1 board
- compatibles
-
-Several SoMs and boards are available that feature the Allwinner D1 SoC.
-Document their compatible strings.
-
-Acked-by: Rob Herring <robh@kernel.org>
-Reviewed-by: Heiko Stuebner <heiko@sntech.de>
-Tested-by: Heiko Stuebner <heiko@sntech.de>
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- .../devicetree/bindings/riscv/sunxi.yaml | 64 +++++++++++++++++++
- 1 file changed, 64 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/riscv/sunxi.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/riscv/sunxi.yaml
-@@ -0,0 +1,64 @@
-+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/riscv/sunxi.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Allwinner RISC-V SoC-based boards
-+
-+maintainers:
-+ - Chen-Yu Tsai <wens@csie.org>
-+ - Jernej Skrabec <jernej.skrabec@gmail.com>
-+ - Samuel Holland <samuel@sholland.org>
-+
-+description:
-+ Allwinner RISC-V SoC-based boards
-+
-+properties:
-+ $nodename:
-+ const: '/'
-+ compatible:
-+ oneOf:
-+ - description: Dongshan Nezha STU SoM
-+ items:
-+ - const: 100ask,dongshan-nezha-stu
-+ - const: allwinner,sun20i-d1
-+
-+ - description: D1 Nezha board
-+ items:
-+ - const: allwinner,d1-nezha
-+ - const: allwinner,sun20i-d1
-+
-+ - description: ClockworkPi R-01 SoM and v3.14 board
-+ items:
-+ - const: clockwork,r-01-clockworkpi-v3.14
-+ - const: allwinner,sun20i-d1
-+
-+ - description: ClockworkPi R-01 SoM, v3.14 board, and DevTerm expansion
-+ items:
-+ - const: clockwork,r-01-devterm-v3.14
-+ - const: clockwork,r-01-clockworkpi-v3.14
-+ - const: allwinner,sun20i-d1
-+
-+ - description: Lichee RV SoM
-+ items:
-+ - const: sipeed,lichee-rv
-+ - const: allwinner,sun20i-d1
-+
-+ - description: Carrier boards for the Lichee RV SoM
-+ items:
-+ - enum:
-+ - sipeed,lichee-rv-86-panel-480p
-+ - sipeed,lichee-rv-86-panel-720p
-+ - sipeed,lichee-rv-dock
-+ - const: sipeed,lichee-rv
-+ - const: allwinner,sun20i-d1
-+
-+ - description: MangoPi MQ Pro board
-+ items:
-+ - const: widora,mangopi-mq-pro
-+ - const: allwinner,sun20i-d1
-+
-+additionalProperties: true
-+
-+...
+++ /dev/null
-From 20d565fb9324b0d2791d10cb65560eddd2ef526e Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Tue, 28 Jun 2022 23:20:33 -0500
-Subject: [PATCH 028/117] riscv: dts: allwinner: Add the D1 SoC base devicetree
-
-D1 is a SoC containing a single-core T-HEAD Xuantie C906 CPU, as well as
-one HiFi 4 DSP. The SoC is based on a design that additionally contained
-a pair of Cortex A7's. For that reason, some peripherals are duplicated.
-
-This devicetree includes all of the peripherals that already have a
-documented binding.
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- arch/riscv/boot/dts/Makefile | 1 +
- arch/riscv/boot/dts/allwinner/Makefile | 1 +
- arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi | 900 +++++++++++++++++++
- 3 files changed, 902 insertions(+)
- create mode 100644 arch/riscv/boot/dts/allwinner/Makefile
- create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
-
---- a/arch/riscv/boot/dts/Makefile
-+++ b/arch/riscv/boot/dts/Makefile
-@@ -1,4 +1,5 @@
- # SPDX-License-Identifier: GPL-2.0
-+subdir-y += allwinner
- subdir-y += sifive
- subdir-y += starfive
- subdir-$(CONFIG_SOC_CANAAN_K210_DTB_BUILTIN) += canaan
---- /dev/null
-+++ b/arch/riscv/boot/dts/allwinner/Makefile
-@@ -0,0 +1 @@
-+# SPDX-License-Identifier: GPL-2.0
---- /dev/null
-+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
-@@ -0,0 +1,900 @@
-+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-+// Copyright (C) 2021-2022 Samuel Holland <samuel@sholland.org>
-+
-+#include <dt-bindings/clock/sun6i-rtc.h>
-+#include <dt-bindings/clock/sun8i-de2.h>
-+#include <dt-bindings/clock/sun8i-tcon-top.h>
-+#include <dt-bindings/clock/sun20i-d1-ccu.h>
-+#include <dt-bindings/clock/sun20i-d1-r-ccu.h>
-+#include <dt-bindings/interrupt-controller/irq.h>
-+#include <dt-bindings/reset/sun8i-de2.h>
-+#include <dt-bindings/reset/sun20i-d1-ccu.h>
-+#include <dt-bindings/reset/sun20i-d1-r-ccu.h>
-+#include <dt-bindings/thermal/thermal.h>
-+
-+/ {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ cpus {
-+ timebase-frequency = <24000000>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ cpu0: cpu@0 {
-+ compatible = "thead,c906", "riscv";
-+ device_type = "cpu";
-+ reg = <0>;
-+ clocks = <&ccu CLK_RISCV>;
-+ clock-frequency = <24000000>;
-+ d-cache-block-size = <64>;
-+ d-cache-sets = <256>;
-+ d-cache-size = <32768>;
-+ i-cache-block-size = <64>;
-+ i-cache-sets = <128>;
-+ i-cache-size = <32768>;
-+ mmu-type = "riscv,sv39";
-+ riscv,isa = "rv64imafdc";
-+ #cooling-cells = <2>;
-+
-+ cpu0_intc: interrupt-controller {
-+ compatible = "riscv,cpu-intc";
-+ interrupt-controller;
-+ #address-cells = <0>;
-+ #interrupt-cells = <1>;
-+ };
-+ };
-+ };
-+
-+ de: display-engine {
-+ compatible = "allwinner,sun20i-d1-display-engine";
-+ allwinner,pipelines = <&mixer0>, <&mixer1>;
-+ status = "disabled";
-+ };
-+
-+ osc24M: osc24M-clk {
-+ compatible = "fixed-clock";
-+ clock-frequency = <24000000>;
-+ clock-output-names = "osc24M";
-+ #clock-cells = <0>;
-+ };
-+
-+ soc {
-+ compatible = "simple-bus";
-+ ranges;
-+ interrupt-parent = <&plic>;
-+ dma-noncoherent;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ dsp_wdt: watchdog@1700400 {
-+ compatible = "allwinner,sun20i-d1-wdt";
-+ reg = <0x1700400 0x20>;
-+ interrupts = <138 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&osc24M>, <&rtc CLK_OSC32K>;
-+ clock-names = "hosc", "losc";
-+ status = "reserved";
-+ };
-+
-+ pio: pinctrl@2000000 {
-+ compatible = "allwinner,sun20i-d1-pinctrl";
-+ reg = <0x2000000 0x800>;
-+ interrupts = <85 IRQ_TYPE_LEVEL_HIGH>,
-+ <87 IRQ_TYPE_LEVEL_HIGH>,
-+ <89 IRQ_TYPE_LEVEL_HIGH>,
-+ <91 IRQ_TYPE_LEVEL_HIGH>,
-+ <93 IRQ_TYPE_LEVEL_HIGH>,
-+ <95 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_APB0>,
-+ <&osc24M>,
-+ <&rtc CLK_OSC32K>;
-+ clock-names = "apb", "hosc", "losc";
-+ gpio-controller;
-+ interrupt-controller;
-+ #gpio-cells = <3>;
-+ #interrupt-cells = <3>;
-+
-+ /omit-if-no-ref/
-+ i2c0_pb10_pins: i2c0-pb10-pins {
-+ pins = "PB10", "PB11";
-+ function = "i2c0";
-+ };
-+
-+ /omit-if-no-ref/
-+ i2c2_pb0_pins: i2c2-pb0-pins {
-+ pins = "PB0", "PB1";
-+ function = "i2c2";
-+ };
-+
-+ /omit-if-no-ref/
-+ lcd_rgb666_pins: lcd-rgb666-pins {
-+ pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5",
-+ "PD6", "PD7", "PD8", "PD9", "PD10", "PD11",
-+ "PD12", "PD13", "PD14", "PD15", "PD16", "PD17",
-+ "PD18", "PD19", "PD20", "PD21";
-+ function = "lcd0";
-+ };
-+
-+ /omit-if-no-ref/
-+ mmc0_pins: mmc0-pins {
-+ pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5";
-+ function = "mmc0";
-+ };
-+
-+ /omit-if-no-ref/
-+ mmc1_pins: mmc1-pins {
-+ pins = "PG0", "PG1", "PG2", "PG3", "PG4", "PG5";
-+ function = "mmc1";
-+ };
-+
-+ /omit-if-no-ref/
-+ mmc2_pins: mmc2-pins {
-+ pins = "PC2", "PC3", "PC4", "PC5", "PC6", "PC7";
-+ function = "mmc2";
-+ };
-+
-+ /omit-if-no-ref/
-+ rgmii_pe_pins: rgmii-pe-pins {
-+ pins = "PE0", "PE1", "PE2", "PE3", "PE4",
-+ "PE5", "PE6", "PE7", "PE8", "PE9",
-+ "PE11", "PE12", "PE13", "PE14", "PE15";
-+ function = "emac";
-+ };
-+
-+ /omit-if-no-ref/
-+ rmii_pe_pins: rmii-pe-pins {
-+ pins = "PE0", "PE1", "PE2", "PE3", "PE4",
-+ "PE5", "PE6", "PE7", "PE8", "PE9";
-+ function = "emac";
-+ };
-+
-+ /omit-if-no-ref/
-+ uart0_pb8_pins: uart0-pb8-pins {
-+ pins = "PB8", "PB9";
-+ function = "uart0";
-+ };
-+
-+ /omit-if-no-ref/
-+ uart1_pg6_pins: uart1-pg6-pins {
-+ pins = "PG6", "PG7";
-+ function = "uart1";
-+ };
-+
-+ /omit-if-no-ref/
-+ uart1_pg8_rts_cts_pins: uart1-pg8-rts-cts-pins {
-+ pins = "PG8", "PG9";
-+ function = "uart1";
-+ };
-+ };
-+
-+ ccu: clock-controller@2001000 {
-+ compatible = "allwinner,sun20i-d1-ccu";
-+ reg = <0x2001000 0x1000>;
-+ clocks = <&osc24M>,
-+ <&rtc CLK_OSC32K>,
-+ <&rtc CLK_IOSC>;
-+ clock-names = "hosc", "losc", "iosc";
-+ #clock-cells = <1>;
-+ #reset-cells = <1>;
-+ };
-+
-+ lradc: keys@2009800 {
-+ compatible = "allwinner,sun20i-d1-lradc",
-+ "allwinner,sun50i-r329-lradc";
-+ reg = <0x2009800 0x400>;
-+ interrupts = <77 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_LRADC>;
-+ resets = <&ccu RST_BUS_LRADC>;
-+ status = "disabled";
-+ };
-+
-+ codec: audio-codec@2030000 {
-+ compatible = "simple-mfd", "syscon";
-+ reg = <0x2030000 0x1000>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ regulators@2030348 {
-+ compatible = "allwinner,sun20i-d1-analog-ldos";
-+ reg = <0x2030348 0x4>;
-+ nvmem-cells = <&bg_trim>;
-+ nvmem-cell-names = "bg_trim";
-+
-+ reg_aldo: aldo {
-+ };
-+
-+ reg_hpldo: hpldo {
-+ };
-+ };
-+ };
-+
-+ i2s0: i2s@2032000 {
-+ compatible = "allwinner,sun20i-d1-i2s",
-+ "allwinner,sun50i-r329-i2s";
-+ reg = <0x2032000 0x1000>;
-+ interrupts = <42 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_I2S0>,
-+ <&ccu CLK_I2S0>;
-+ clock-names = "apb", "mod";
-+ resets = <&ccu RST_BUS_I2S0>;
-+ dmas = <&dma 3>, <&dma 3>;
-+ dma-names = "rx", "tx";
-+ status = "disabled";
-+ #sound-dai-cells = <0>;
-+ };
-+
-+ i2s1: i2s@2033000 {
-+ compatible = "allwinner,sun20i-d1-i2s",
-+ "allwinner,sun50i-r329-i2s";
-+ reg = <0x2033000 0x1000>;
-+ interrupts = <43 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_I2S1>,
-+ <&ccu CLK_I2S1>;
-+ clock-names = "apb", "mod";
-+ resets = <&ccu RST_BUS_I2S1>;
-+ dmas = <&dma 4>, <&dma 4>;
-+ dma-names = "rx", "tx";
-+ status = "disabled";
-+ #sound-dai-cells = <0>;
-+ };
-+
-+ i2s2: i2s@2034000 {
-+ compatible = "allwinner,sun20i-d1-i2s",
-+ "allwinner,sun50i-r329-i2s";
-+ reg = <0x2034000 0x1000>;
-+ interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_I2S2>,
-+ <&ccu CLK_I2S2>;
-+ clock-names = "apb", "mod";
-+ resets = <&ccu RST_BUS_I2S2>;
-+ dmas = <&dma 5>, <&dma 5>;
-+ dma-names = "rx", "tx";
-+ status = "disabled";
-+ #sound-dai-cells = <0>;
-+ };
-+
-+ timer: timer@2050000 {
-+ compatible = "allwinner,sun20i-d1-timer",
-+ "allwinner,sun8i-a23-timer";
-+ reg = <0x2050000 0xa0>;
-+ interrupts = <75 IRQ_TYPE_LEVEL_HIGH>,
-+ <76 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&osc24M>;
-+ };
-+
-+ wdt: watchdog@20500a0 {
-+ compatible = "allwinner,sun20i-d1-wdt-reset",
-+ "allwinner,sun20i-d1-wdt";
-+ reg = <0x20500a0 0x20>;
-+ interrupts = <79 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&osc24M>, <&rtc CLK_OSC32K>;
-+ clock-names = "hosc", "losc";
-+ status = "reserved";
-+ };
-+
-+ uart0: serial@2500000 {
-+ compatible = "snps,dw-apb-uart";
-+ reg = <0x2500000 0x400>;
-+ reg-io-width = <4>;
-+ reg-shift = <2>;
-+ interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_UART0>;
-+ resets = <&ccu RST_BUS_UART0>;
-+ dmas = <&dma 14>, <&dma 14>;
-+ dma-names = "rx", "tx";
-+ status = "disabled";
-+ };
-+
-+ uart1: serial@2500400 {
-+ compatible = "snps,dw-apb-uart";
-+ reg = <0x2500400 0x400>;
-+ reg-io-width = <4>;
-+ reg-shift = <2>;
-+ interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_UART1>;
-+ resets = <&ccu RST_BUS_UART1>;
-+ dmas = <&dma 15>, <&dma 15>;
-+ dma-names = "rx", "tx";
-+ status = "disabled";
-+ };
-+
-+ uart2: serial@2500800 {
-+ compatible = "snps,dw-apb-uart";
-+ reg = <0x2500800 0x400>;
-+ reg-io-width = <4>;
-+ reg-shift = <2>;
-+ interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_UART2>;
-+ resets = <&ccu RST_BUS_UART2>;
-+ dmas = <&dma 16>, <&dma 16>;
-+ dma-names = "rx", "tx";
-+ status = "disabled";
-+ };
-+
-+ uart3: serial@2500c00 {
-+ compatible = "snps,dw-apb-uart";
-+ reg = <0x2500c00 0x400>;
-+ reg-io-width = <4>;
-+ reg-shift = <2>;
-+ interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_UART3>;
-+ resets = <&ccu RST_BUS_UART3>;
-+ dmas = <&dma 17>, <&dma 17>;
-+ dma-names = "rx", "tx";
-+ status = "disabled";
-+ };
-+
-+ uart4: serial@2501000 {
-+ compatible = "snps,dw-apb-uart";
-+ reg = <0x2501000 0x400>;
-+ reg-io-width = <4>;
-+ reg-shift = <2>;
-+ interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_UART4>;
-+ resets = <&ccu RST_BUS_UART4>;
-+ dmas = <&dma 18>, <&dma 18>;
-+ dma-names = "rx", "tx";
-+ status = "disabled";
-+ };
-+
-+ uart5: serial@2501400 {
-+ compatible = "snps,dw-apb-uart";
-+ reg = <0x2501400 0x400>;
-+ reg-io-width = <4>;
-+ reg-shift = <2>;
-+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_UART5>;
-+ resets = <&ccu RST_BUS_UART5>;
-+ dmas = <&dma 19>, <&dma 19>;
-+ dma-names = "rx", "tx";
-+ status = "disabled";
-+ };
-+
-+ i2c0: i2c@2502000 {
-+ compatible = "allwinner,sun20i-d1-i2c",
-+ "allwinner,sun8i-v536-i2c",
-+ "allwinner,sun6i-a31-i2c";
-+ reg = <0x2502000 0x400>;
-+ interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_I2C0>;
-+ resets = <&ccu RST_BUS_I2C0>;
-+ dmas = <&dma 43>, <&dma 43>;
-+ dma-names = "rx", "tx";
-+ status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+
-+ i2c1: i2c@2502400 {
-+ compatible = "allwinner,sun20i-d1-i2c",
-+ "allwinner,sun8i-v536-i2c",
-+ "allwinner,sun6i-a31-i2c";
-+ reg = <0x2502400 0x400>;
-+ interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_I2C1>;
-+ resets = <&ccu RST_BUS_I2C1>;
-+ dmas = <&dma 44>, <&dma 44>;
-+ dma-names = "rx", "tx";
-+ status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+
-+ i2c2: i2c@2502800 {
-+ compatible = "allwinner,sun20i-d1-i2c",
-+ "allwinner,sun8i-v536-i2c",
-+ "allwinner,sun6i-a31-i2c";
-+ reg = <0x2502800 0x400>;
-+ interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_I2C2>;
-+ resets = <&ccu RST_BUS_I2C2>;
-+ dmas = <&dma 45>, <&dma 45>;
-+ dma-names = "rx", "tx";
-+ status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+
-+ i2c3: i2c@2502c00 {
-+ compatible = "allwinner,sun20i-d1-i2c",
-+ "allwinner,sun8i-v536-i2c",
-+ "allwinner,sun6i-a31-i2c";
-+ reg = <0x2502c00 0x400>;
-+ interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_I2C3>;
-+ resets = <&ccu RST_BUS_I2C3>;
-+ dmas = <&dma 46>, <&dma 46>;
-+ dma-names = "rx", "tx";
-+ status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+
-+ syscon: syscon@3000000 {
-+ compatible = "allwinner,sun20i-d1-system-control";
-+ reg = <0x3000000 0x1000>;
-+ ranges;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ regulators@3000150 {
-+ compatible = "allwinner,sun20i-d1-system-ldos";
-+ reg = <0x3000150 0x4>;
-+
-+ reg_ldoa: ldoa {
-+ };
-+
-+ reg_ldob: ldob {
-+ };
-+ };
-+ };
-+
-+ dma: dma-controller@3002000 {
-+ compatible = "allwinner,sun20i-d1-dma";
-+ reg = <0x3002000 0x1000>;
-+ interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>;
-+ clock-names = "bus", "mbus";
-+ resets = <&ccu RST_BUS_DMA>;
-+ dma-channels = <16>;
-+ dma-requests = <48>;
-+ #dma-cells = <1>;
-+ };
-+
-+ sid: efuse@3006000 {
-+ compatible = "allwinner,sun20i-d1-sid";
-+ reg = <0x3006000 0x1000>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ ths_calib: ths-calib@14 {
-+ reg = <0x14 0x4>;
-+ };
-+
-+ bg_trim: bg-trim@28 {
-+ reg = <0x28 0x4>;
-+ bits = <16 8>;
-+ };
-+ };
-+
-+ mbus: dram-controller@3102000 {
-+ compatible = "allwinner,sun20i-d1-mbus";
-+ reg = <0x3102000 0x1000>,
-+ <0x3103000 0x1000>;
-+ reg-names = "mbus", "dram";
-+ interrupts = <59 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_MBUS>,
-+ <&ccu CLK_DRAM>,
-+ <&ccu CLK_BUS_DRAM>;
-+ clock-names = "mbus", "dram", "bus";
-+ dma-ranges = <0 0x40000000 0x80000000>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ #interconnect-cells = <1>;
-+ };
-+
-+ mmc0: mmc@4020000 {
-+ compatible = "allwinner,sun20i-d1-mmc";
-+ reg = <0x4020000 0x1000>;
-+ interrupts = <56 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
-+ clock-names = "ahb", "mmc";
-+ resets = <&ccu RST_BUS_MMC0>;
-+ reset-names = "ahb";
-+ cap-sd-highspeed;
-+ max-frequency = <150000000>;
-+ no-mmc;
-+ status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+
-+ mmc1: mmc@4021000 {
-+ compatible = "allwinner,sun20i-d1-mmc";
-+ reg = <0x4021000 0x1000>;
-+ interrupts = <57 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
-+ clock-names = "ahb", "mmc";
-+ resets = <&ccu RST_BUS_MMC1>;
-+ reset-names = "ahb";
-+ cap-sd-highspeed;
-+ max-frequency = <150000000>;
-+ no-mmc;
-+ status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+
-+ mmc2: mmc@4022000 {
-+ compatible = "allwinner,sun20i-d1-emmc",
-+ "allwinner,sun50i-a100-emmc";
-+ reg = <0x4022000 0x1000>;
-+ interrupts = <58 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
-+ clock-names = "ahb", "mmc";
-+ resets = <&ccu RST_BUS_MMC2>;
-+ reset-names = "ahb";
-+ cap-mmc-highspeed;
-+ max-frequency = <150000000>;
-+ mmc-ddr-1_8v;
-+ mmc-ddr-3_3v;
-+ no-sd;
-+ no-sdio;
-+ status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+
-+ usb_otg: usb@4100000 {
-+ compatible = "allwinner,sun20i-d1-musb",
-+ "allwinner,sun8i-a33-musb";
-+ reg = <0x4100000 0x400>;
-+ interrupts = <45 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupt-names = "mc";
-+ clocks = <&ccu CLK_BUS_OTG>;
-+ resets = <&ccu RST_BUS_OTG>;
-+ extcon = <&usbphy 0>;
-+ phys = <&usbphy 0>;
-+ phy-names = "usb";
-+ status = "disabled";
-+ };
-+
-+ usbphy: phy@4100400 {
-+ compatible = "allwinner,sun20i-d1-usb-phy";
-+ reg = <0x4100400 0x100>,
-+ <0x4101800 0x100>,
-+ <0x4200800 0x100>;
-+ reg-names = "phy_ctrl",
-+ "pmu0",
-+ "pmu1";
-+ clocks = <&osc24M>,
-+ <&osc24M>;
-+ clock-names = "usb0_phy",
-+ "usb1_phy";
-+ resets = <&ccu RST_USB_PHY0>,
-+ <&ccu RST_USB_PHY1>;
-+ reset-names = "usb0_reset",
-+ "usb1_reset";
-+ status = "disabled";
-+ #phy-cells = <1>;
-+ };
-+
-+ ehci0: usb@4101000 {
-+ compatible = "allwinner,sun20i-d1-ehci",
-+ "generic-ehci";
-+ reg = <0x4101000 0x100>;
-+ interrupts = <46 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_OHCI0>,
-+ <&ccu CLK_BUS_EHCI0>,
-+ <&ccu CLK_USB_OHCI0>;
-+ resets = <&ccu RST_BUS_OHCI0>,
-+ <&ccu RST_BUS_EHCI0>;
-+ phys = <&usbphy 0>;
-+ phy-names = "usb";
-+ status = "disabled";
-+ };
-+
-+ ohci0: usb@4101400 {
-+ compatible = "allwinner,sun20i-d1-ohci",
-+ "generic-ohci";
-+ reg = <0x4101400 0x100>;
-+ interrupts = <47 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_OHCI0>,
-+ <&ccu CLK_USB_OHCI0>;
-+ resets = <&ccu RST_BUS_OHCI0>;
-+ phys = <&usbphy 0>;
-+ phy-names = "usb";
-+ status = "disabled";
-+ };
-+
-+ ehci1: usb@4200000 {
-+ compatible = "allwinner,sun20i-d1-ehci",
-+ "generic-ehci";
-+ reg = <0x4200000 0x100>;
-+ interrupts = <49 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_OHCI1>,
-+ <&ccu CLK_BUS_EHCI1>,
-+ <&ccu CLK_USB_OHCI1>;
-+ resets = <&ccu RST_BUS_OHCI1>,
-+ <&ccu RST_BUS_EHCI1>;
-+ phys = <&usbphy 1>;
-+ phy-names = "usb";
-+ status = "disabled";
-+ };
-+
-+ ohci1: usb@4200400 {
-+ compatible = "allwinner,sun20i-d1-ohci",
-+ "generic-ohci";
-+ reg = <0x4200400 0x100>;
-+ interrupts = <50 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_OHCI1>,
-+ <&ccu CLK_USB_OHCI1>;
-+ resets = <&ccu RST_BUS_OHCI1>;
-+ phys = <&usbphy 1>;
-+ phy-names = "usb";
-+ status = "disabled";
-+ };
-+
-+ emac: ethernet@4500000 {
-+ compatible = "allwinner,sun20i-d1-emac",
-+ "allwinner,sun50i-a64-emac";
-+ reg = <0x4500000 0x10000>;
-+ interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupt-names = "macirq";
-+ clocks = <&ccu CLK_BUS_EMAC>;
-+ clock-names = "stmmaceth";
-+ resets = <&ccu RST_BUS_EMAC>;
-+ reset-names = "stmmaceth";
-+ syscon = <&syscon>;
-+ status = "disabled";
-+
-+ mdio: mdio {
-+ compatible = "snps,dwmac-mdio";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+ };
-+
-+ display_clocks: clock-controller@5000000 {
-+ compatible = "allwinner,sun20i-d1-de2-clk",
-+ "allwinner,sun50i-h5-de2-clk";
-+ reg = <0x5000000 0x10000>;
-+ clocks = <&ccu CLK_BUS_DE>, <&ccu CLK_DE>;
-+ clock-names = "bus", "mod";
-+ resets = <&ccu RST_BUS_DE>;
-+ #clock-cells = <1>;
-+ #reset-cells = <1>;
-+ };
-+
-+ mixer0: mixer@5100000 {
-+ compatible = "allwinner,sun20i-d1-de2-mixer-0";
-+ reg = <0x5100000 0x100000>;
-+ clocks = <&display_clocks CLK_BUS_MIXER0>,
-+ <&display_clocks CLK_MIXER0>;
-+ clock-names = "bus", "mod";
-+ resets = <&display_clocks RST_MIXER0>;
-+
-+ ports {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ mixer0_out: port@1 {
-+ reg = <1>;
-+
-+ mixer0_out_tcon_top_mixer0: endpoint {
-+ remote-endpoint = <&tcon_top_mixer0_in_mixer0>;
-+ };
-+ };
-+ };
-+ };
-+
-+ mixer1: mixer@5200000 {
-+ compatible = "allwinner,sun20i-d1-de2-mixer-1";
-+ reg = <0x5200000 0x100000>;
-+ clocks = <&display_clocks CLK_BUS_MIXER1>,
-+ <&display_clocks CLK_MIXER1>;
-+ clock-names = "bus", "mod";
-+ resets = <&display_clocks RST_MIXER1>;
-+
-+ ports {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ mixer1_out: port@1 {
-+ reg = <1>;
-+
-+ mixer1_out_tcon_top_mixer1: endpoint {
-+ remote-endpoint = <&tcon_top_mixer1_in_mixer1>;
-+ };
-+ };
-+ };
-+ };
-+
-+ tcon_top: tcon-top@5460000 {
-+ compatible = "allwinner,sun20i-d1-tcon-top";
-+ reg = <0x5460000 0x1000>;
-+ clocks = <&ccu CLK_BUS_DPSS_TOP>,
-+ <&ccu CLK_TCON_TV>,
-+ <&ccu CLK_TVE>,
-+ <&ccu CLK_TCON_LCD0>;
-+ clock-names = "bus", "tcon-tv0", "tve0", "dsi";
-+ clock-output-names = "tcon-top-tv0", "tcon-top-dsi";
-+ resets = <&ccu RST_BUS_DPSS_TOP>;
-+ #clock-cells = <1>;
-+
-+ ports {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ tcon_top_mixer0_in: port@0 {
-+ reg = <0>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ tcon_top_mixer0_in_mixer0: endpoint@0 {
-+ reg = <0>;
-+ remote-endpoint = <&mixer0_out_tcon_top_mixer0>;
-+ };
-+ };
-+
-+ tcon_top_mixer0_out: port@1 {
-+ reg = <1>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ tcon_top_mixer0_out_tcon_lcd0: endpoint@0 {
-+ reg = <0>;
-+ remote-endpoint = <&tcon_lcd0_in_tcon_top_mixer0>;
-+ };
-+
-+ tcon_top_mixer0_out_tcon_tv0: endpoint@2 {
-+ reg = <2>;
-+ remote-endpoint = <&tcon_tv0_in_tcon_top_mixer0>;
-+ };
-+ };
-+
-+ tcon_top_mixer1_in: port@2 {
-+ reg = <2>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ tcon_top_mixer1_in_mixer1: endpoint@1 {
-+ reg = <1>;
-+ remote-endpoint = <&mixer1_out_tcon_top_mixer1>;
-+ };
-+ };
-+
-+ tcon_top_mixer1_out: port@3 {
-+ reg = <3>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ tcon_top_mixer1_out_tcon_lcd0: endpoint@0 {
-+ reg = <0>;
-+ remote-endpoint = <&tcon_lcd0_in_tcon_top_mixer1>;
-+ };
-+
-+ tcon_top_mixer1_out_tcon_tv0: endpoint@2 {
-+ reg = <2>;
-+ remote-endpoint = <&tcon_tv0_in_tcon_top_mixer1>;
-+ };
-+ };
-+
-+ tcon_top_hdmi_in: port@4 {
-+ reg = <4>;
-+
-+ tcon_top_hdmi_in_tcon_tv0: endpoint {
-+ remote-endpoint = <&tcon_tv0_out_tcon_top_hdmi>;
-+ };
-+ };
-+
-+ tcon_top_hdmi_out: port@5 {
-+ reg = <5>;
-+ };
-+ };
-+ };
-+
-+ tcon_lcd0: lcd-controller@5461000 {
-+ compatible = "allwinner,sun20i-d1-tcon-lcd";
-+ reg = <0x5461000 0x1000>;
-+ interrupts = <106 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_TCON_LCD0>,
-+ <&ccu CLK_TCON_LCD0>;
-+ clock-names = "ahb", "tcon-ch0";
-+ clock-output-names = "tcon-pixel-clock";
-+ resets = <&ccu RST_BUS_TCON_LCD0>,
-+ <&ccu RST_BUS_LVDS0>;
-+ reset-names = "lcd", "lvds";
-+ #clock-cells = <0>;
-+
-+ ports {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ tcon_lcd0_in: port@0 {
-+ reg = <0>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ tcon_lcd0_in_tcon_top_mixer0: endpoint@0 {
-+ reg = <0>;
-+ remote-endpoint = <&tcon_top_mixer0_out_tcon_lcd0>;
-+ };
-+
-+ tcon_lcd0_in_tcon_top_mixer1: endpoint@1 {
-+ reg = <1>;
-+ remote-endpoint = <&tcon_top_mixer1_out_tcon_lcd0>;
-+ };
-+ };
-+
-+ tcon_lcd0_out: port@1 {
-+ reg = <1>;
-+ };
-+ };
-+ };
-+
-+ tcon_tv0: lcd-controller@5470000 {
-+ compatible = "allwinner,sun20i-d1-tcon-tv";
-+ reg = <0x5470000 0x1000>;
-+ interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_TCON_TV>,
-+ <&tcon_top CLK_TCON_TOP_TV0>;
-+ clock-names = "ahb", "tcon-ch1";
-+ resets = <&ccu RST_BUS_TCON_TV>;
-+ reset-names = "lcd";
-+
-+ ports {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ tcon_tv0_in: port@0 {
-+ reg = <0>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ tcon_tv0_in_tcon_top_mixer0: endpoint@0 {
-+ reg = <0>;
-+ remote-endpoint = <&tcon_top_mixer0_out_tcon_tv0>;
-+ };
-+
-+ tcon_tv0_in_tcon_top_mixer1: endpoint@1 {
-+ reg = <1>;
-+ remote-endpoint = <&tcon_top_mixer1_out_tcon_tv0>;
-+ };
-+ };
-+
-+ tcon_tv0_out: port@1 {
-+ reg = <1>;
-+
-+ tcon_tv0_out_tcon_top_hdmi: endpoint {
-+ remote-endpoint = <&tcon_top_hdmi_in_tcon_tv0>;
-+ };
-+ };
-+ };
-+ };
-+
-+ riscv_wdt: watchdog@6011000 {
-+ compatible = "allwinner,sun20i-d1-wdt";
-+ reg = <0x6011000 0x20>;
-+ interrupts = <147 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&osc24M>, <&rtc CLK_OSC32K>;
-+ clock-names = "hosc", "losc";
-+ };
-+
-+ r_ccu: clock-controller@7010000 {
-+ compatible = "allwinner,sun20i-d1-r-ccu";
-+ reg = <0x7010000 0x400>;
-+ clocks = <&osc24M>,
-+ <&rtc CLK_OSC32K>,
-+ <&rtc CLK_IOSC>,
-+ <&ccu CLK_PLL_PERIPH0_DIV3>;
-+ clock-names = "hosc", "losc", "iosc", "pll-periph";
-+ #clock-cells = <1>;
-+ #reset-cells = <1>;
-+ };
-+
-+ rtc: rtc@7090000 {
-+ compatible = "allwinner,sun20i-d1-rtc",
-+ "allwinner,sun50i-r329-rtc";
-+ reg = <0x7090000 0x400>;
-+ interrupts = <160 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&r_ccu CLK_BUS_R_RTC>,
-+ <&osc24M>,
-+ <&r_ccu CLK_R_AHB>;
-+ clock-names = "bus", "hosc", "ahb";
-+ #clock-cells = <1>;
-+ };
-+
-+ plic: interrupt-controller@10000000 {
-+ compatible = "allwinner,sun20i-d1-plic",
-+ "thead,c900-plic";
-+ reg = <0x10000000 0x4000000>;
-+ interrupts-extended = <&cpu0_intc 11>,
-+ <&cpu0_intc 9>;
-+ interrupt-controller;
-+ riscv,ndev = <176>;
-+ #address-cells = <0>;
-+ #interrupt-cells = <2>;
-+ };
-+ };
-+};
+++ /dev/null
-From 5da27190c54b7a51062786eb01246f6f4cf2ba98 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Tue, 28 Jun 2022 23:31:16 -0500
-Subject: [PATCH 029/117] riscv: dts: allwinner: Add Allwinner D1 Nezha
- devicetree
-
-"D1 Nezha" is Allwinner's first-party development board for the D1 SoC.
-It was shipped with 512M, 1G, or 2G of DDR3. It supports onboard audio,
-HDMI, gigabit Ethernet, WiFi and Bluetooth, USB 2.0 host and OTG ports,
-plus low-speed I/O from the SoC and a GPIO expander chip.
-
-Most other D1 boards copied the Nezha's power tree, with the 1.8V rail
-powered by the SoCs internal LDOA, analog domains powered by ALDO, and
-the rest of the board powered by always-on fixed regulators. Some (but
-not all) boards also copied the PWM CPU regulator. To avoid duplication,
-factor out the out the regulator references that are common across all
-known boards.
-
-Reviewed-by: Heiko Stuebner <heiko@sntech.de>
-Tested-by: Conor Dooley <conor.dooley@microchip.com>
-Tested-by: Heiko Stuebner <heiko@sntech.de>
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- arch/riscv/boot/dts/allwinner/Makefile | 1 +
- .../sun20i-d1-common-regulators.dtsi | 51 ++++++
- .../boot/dts/allwinner/sun20i-d1-nezha.dts | 171 ++++++++++++++++++
- 3 files changed, 223 insertions(+)
- create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-common-regulators.dtsi
- create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
-
---- a/arch/riscv/boot/dts/allwinner/Makefile
-+++ b/arch/riscv/boot/dts/allwinner/Makefile
-@@ -1 +1,2 @@
- # SPDX-License-Identifier: GPL-2.0
-+dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-nezha.dtb
---- /dev/null
-+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-common-regulators.dtsi
-@@ -0,0 +1,51 @@
-+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-+// Copyright (C) 2021-2022 Samuel Holland <samuel@sholland.org>
-+
-+/ {
-+ reg_vcc: vcc {
-+ compatible = "regulator-fixed";
-+ regulator-name = "vcc";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ };
-+
-+ reg_vcc_3v3: vcc-3v3 {
-+ compatible = "regulator-fixed";
-+ regulator-name = "vcc-3v3";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ vin-supply = <®_vcc>;
-+ };
-+};
-+
-+&lradc {
-+ vref-supply = <®_aldo>;
-+};
-+
-+&pio {
-+ vcc-pb-supply = <®_vcc_3v3>;
-+ vcc-pc-supply = <®_vcc_3v3>;
-+ vcc-pd-supply = <®_vcc_3v3>;
-+ vcc-pe-supply = <®_vcc_3v3>;
-+ vcc-pf-supply = <®_vcc_3v3>;
-+ vcc-pg-supply = <®_vcc_3v3>;
-+};
-+
-+®_aldo {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ vdd33-supply = <®_vcc_3v3>;
-+};
-+
-+®_hpldo {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ hpldoin-supply = <®_vcc_3v3>;
-+};
-+
-+®_ldoa {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ ldo-in-supply = <®_vcc_3v3>;
-+};
---- /dev/null
-+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
-@@ -0,0 +1,171 @@
-+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-+// Copyright (C) 2021-2022 Samuel Holland <samuel@sholland.org>
-+
-+/dts-v1/;
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+
-+#include "sun20i-d1.dtsi"
-+#include "sun20i-d1-common-regulators.dtsi"
-+
-+/ {
-+ model = "Allwinner D1 Nezha";
-+ compatible = "allwinner,d1-nezha", "allwinner,sun20i-d1";
-+
-+ aliases {
-+ ethernet0 = &emac;
-+ ethernet1 = &xr829;
-+ mmc0 = &mmc0;
-+ serial0 = &uart0;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+
-+ reg_usbvbus: usbvbus {
-+ compatible = "regulator-fixed";
-+ regulator-name = "usbvbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ gpio = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */
-+ enable-active-high;
-+ vin-supply = <®_vcc>;
-+ };
-+
-+ /*
-+ * This regulator is PWM-controlled, but the PWM controller is not
-+ * yet supported, so fix the regulator to its default voltage.
-+ */
-+ reg_vdd_cpu: vdd-cpu {
-+ compatible = "regulator-fixed";
-+ regulator-name = "vdd-cpu";
-+ regulator-min-microvolt = <1100000>;
-+ regulator-max-microvolt = <1100000>;
-+ vin-supply = <®_vcc>;
-+ };
-+
-+ wifi_pwrseq: wifi-pwrseq {
-+ compatible = "mmc-pwrseq-simple";
-+ reset-gpios = <&pio 6 12 GPIO_ACTIVE_LOW>; /* PG12 */
-+ };
-+};
-+
-+&cpu0 {
-+ cpu-supply = <®_vdd_cpu>;
-+};
-+
-+&ehci0 {
-+ status = "okay";
-+};
-+
-+&ehci1 {
-+ status = "okay";
-+};
-+
-+&emac {
-+ pinctrl-0 = <&rgmii_pe_pins>;
-+ pinctrl-names = "default";
-+ phy-handle = <&ext_rgmii_phy>;
-+ phy-mode = "rgmii-id";
-+ phy-supply = <®_vcc_3v3>;
-+ status = "okay";
-+};
-+
-+&i2c2 {
-+ pinctrl-0 = <&i2c2_pb0_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+
-+ pcf8574a: gpio@38 {
-+ compatible = "nxp,pcf8574a";
-+ reg = <0x38>;
-+ interrupt-parent = <&pio>;
-+ interrupts = <1 2 IRQ_TYPE_LEVEL_LOW>; /* PB2 */
-+ interrupt-controller;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ };
-+};
-+
-+&lradc {
-+ status = "okay";
-+
-+ button-160 {
-+ label = "OK";
-+ linux,code = <KEY_OK>;
-+ channel = <0>;
-+ voltage = <160000>;
-+ };
-+};
-+
-+&mdio {
-+ ext_rgmii_phy: ethernet-phy@1 {
-+ compatible = "ethernet-phy-ieee802.3-c22";
-+ reg = <1>;
-+ };
-+};
-+
-+&mmc0 {
-+ bus-width = <4>;
-+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
-+ disable-wp;
-+ vmmc-supply = <®_vcc_3v3>;
-+ vqmmc-supply = <®_vcc_3v3>;
-+ pinctrl-0 = <&mmc0_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+};
-+
-+&mmc1 {
-+ bus-width = <4>;
-+ mmc-pwrseq = <&wifi_pwrseq>;
-+ non-removable;
-+ vmmc-supply = <®_vcc_3v3>;
-+ vqmmc-supply = <®_vcc_3v3>;
-+ pinctrl-0 = <&mmc1_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+
-+ xr829: wifi@1 {
-+ reg = <1>;
-+ };
-+};
-+
-+&ohci0 {
-+ status = "okay";
-+};
-+
-+&ohci1 {
-+ status = "okay";
-+};
-+
-+&uart0 {
-+ pinctrl-0 = <&uart0_pb8_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+};
-+
-+&uart1 {
-+ uart-has-rtscts;
-+ pinctrl-0 = <&uart1_pg6_pins>, <&uart1_pg8_rts_cts_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+
-+ /* XR829 bluetooth is connected here */
-+};
-+
-+&usb_otg {
-+ dr_mode = "otg";
-+ status = "okay";
-+};
-+
-+&usbphy {
-+ usb0_id_det-gpios = <&pio 3 21 GPIO_ACTIVE_HIGH>; /* PD21 */
-+ usb0_vbus_det-gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
-+ usb0_vbus-supply = <®_usbvbus>;
-+ usb1_vbus-supply = <®_vcc>;
-+ status = "okay";
-+};
+++ /dev/null
-From 3bf76e93011425ed64a69c462b9959ed2a8ccf46 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Wed, 29 Jun 2022 00:13:50 -0500
-Subject: [PATCH 030/117] riscv: dts: allwinner: Add Sipeed Lichee RV
- devicetrees
-
-Sipeed manufactures a "Lichee RV" system-on-module, which provides a
-minimal working system on its own, as well as a few carrier boards. The
-"Dock" board provides audio, USB, and WiFi. The "86 Panel" additionally
-provides 100M Ethernet and a built-in display panel.
-
-The 86 Panel repurposes the USB ID and VBUS detection GPIOs for its RGB
-panel interface, since the USB OTG port is inaccessible inside the case.
-
-Co-developed-by: Jisheng Zhang <jszhang@kernel.org>
-Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- arch/riscv/boot/dts/allwinner/Makefile | 4 +
- .../sun20i-d1-lichee-rv-86-panel-480p.dts | 29 ++++++
- .../sun20i-d1-lichee-rv-86-panel-720p.dts | 10 ++
- .../sun20i-d1-lichee-rv-86-panel.dtsi | 92 +++++++++++++++++++
- .../allwinner/sun20i-d1-lichee-rv-dock.dts | 74 +++++++++++++++
- .../dts/allwinner/sun20i-d1-lichee-rv.dts | 84 +++++++++++++++++
- 6 files changed, 293 insertions(+)
- create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel-480p.dts
- create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel-720p.dts
- create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel.dtsi
- create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dts
- create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv.dts
-
---- a/arch/riscv/boot/dts/allwinner/Makefile
-+++ b/arch/riscv/boot/dts/allwinner/Makefile
-@@ -1,2 +1,6 @@
- # SPDX-License-Identifier: GPL-2.0
-+dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-86-panel-480p.dtb
-+dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-86-panel-720p.dtb
-+dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-dock.dtb
-+dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv.dtb
- dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-nezha.dtb
---- /dev/null
-+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel-480p.dts
-@@ -0,0 +1,29 @@
-+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-+// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
-+
-+#include "sun20i-d1-lichee-rv-86-panel.dtsi"
-+
-+/ {
-+ model = "Sipeed Lichee RV 86 Panel (480p)";
-+ compatible = "sipeed,lichee-rv-86-panel-480p", "sipeed,lichee-rv",
-+ "allwinner,sun20i-d1";
-+};
-+
-+&i2c2 {
-+ pinctrl-0 = <&i2c2_pb0_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+
-+ touchscreen@48 {
-+ compatible = "focaltech,ft6236";
-+ reg = <0x48>;
-+ interrupt-parent = <&pio>;
-+ interrupts = <6 14 IRQ_TYPE_LEVEL_LOW>; /* PG14 */
-+ iovcc-supply = <®_vcc_3v3>;
-+ reset-gpios = <&pio 6 15 GPIO_ACTIVE_LOW>; /* PG15 */
-+ touchscreen-size-x = <480>;
-+ touchscreen-size-y = <480>;
-+ vcc-supply = <®_vcc_3v3>;
-+ wakeup-source;
-+ };
-+};
---- /dev/null
-+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel-720p.dts
-@@ -0,0 +1,10 @@
-+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-+// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
-+
-+#include "sun20i-d1-lichee-rv-86-panel.dtsi"
-+
-+/ {
-+ model = "Sipeed Lichee RV 86 Panel (720p)";
-+ compatible = "sipeed,lichee-rv-86-panel-720p", "sipeed,lichee-rv",
-+ "allwinner,sun20i-d1";
-+};
---- /dev/null
-+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel.dtsi
-@@ -0,0 +1,92 @@
-+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-+// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
-+
-+#include "sun20i-d1-lichee-rv.dts"
-+
-+/ {
-+ aliases {
-+ ethernet0 = &emac;
-+ ethernet1 = &xr829;
-+ };
-+
-+ /* PC1 is repurposed as BT_WAKE_AP */
-+ /delete-node/ leds;
-+
-+ wifi_pwrseq: wifi-pwrseq {
-+ compatible = "mmc-pwrseq-simple";
-+ clocks = <&ccu CLK_FANOUT1>;
-+ clock-names = "ext_clock";
-+ reset-gpios = <&pio 6 12 GPIO_ACTIVE_LOW>; /* PG12 */
-+ assigned-clocks = <&ccu CLK_FANOUT1>;
-+ assigned-clock-rates = <32768>;
-+ pinctrl-0 = <&clk_pg11_pin>;
-+ pinctrl-names = "default";
-+ };
-+};
-+
-+&ehci1 {
-+ status = "okay";
-+};
-+
-+&emac {
-+ pinctrl-0 = <&rmii_pe_pins>;
-+ pinctrl-names = "default";
-+ phy-handle = <&ext_rmii_phy>;
-+ phy-mode = "rmii";
-+ phy-supply = <®_vcc_3v3>;
-+ status = "okay";
-+};
-+
-+&mdio {
-+ ext_rmii_phy: ethernet-phy@1 {
-+ compatible = "ethernet-phy-ieee802.3-c22";
-+ reg = <1>;
-+ reset-gpios = <&pio 4 16 GPIO_ACTIVE_LOW>; /* PE16 */
-+ };
-+};
-+
-+&mmc1 {
-+ bus-width = <4>;
-+ mmc-pwrseq = <&wifi_pwrseq>;
-+ non-removable;
-+ vmmc-supply = <®_vcc_3v3>;
-+ vqmmc-supply = <®_vcc_3v3>;
-+ pinctrl-0 = <&mmc1_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+
-+ xr829: wifi@1 {
-+ reg = <1>;
-+ };
-+};
-+
-+&ohci1 {
-+ status = "okay";
-+};
-+
-+&pio {
-+ clk_pg11_pin: clk-pg11-pin {
-+ pins = "PG11";
-+ function = "clk";
-+ };
-+};
-+
-+&uart1 {
-+ uart-has-rtscts;
-+ pinctrl-0 = <&uart1_pg6_pins>, <&uart1_pg8_rts_cts_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+
-+ /* XR829 bluetooth is connected here */
-+};
-+
-+&usb_otg {
-+ status = "disabled";
-+};
-+
-+&usbphy {
-+ /* PD20 and PD21 are repurposed for the LCD panel */
-+ /delete-property/ usb0_id_det-gpios;
-+ /delete-property/ usb0_vbus_det-gpios;
-+ usb1_vbus-supply = <®_vcc>;
-+};
---- /dev/null
-+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dts
-@@ -0,0 +1,74 @@
-+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-+// Copyright (C) 2022 Jisheng Zhang <jszhang@kernel.org>
-+// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
-+
-+#include <dt-bindings/input/input.h>
-+
-+#include "sun20i-d1-lichee-rv.dts"
-+
-+/ {
-+ model = "Sipeed Lichee RV Dock";
-+ compatible = "sipeed,lichee-rv-dock", "sipeed,lichee-rv",
-+ "allwinner,sun20i-d1";
-+
-+ aliases {
-+ ethernet1 = &rtl8723ds;
-+ };
-+
-+ wifi_pwrseq: wifi-pwrseq {
-+ compatible = "mmc-pwrseq-simple";
-+ reset-gpios = <&pio 6 12 GPIO_ACTIVE_LOW>; /* PG12 */
-+ };
-+};
-+
-+&ehci1 {
-+ status = "okay";
-+};
-+
-+&lradc {
-+ status = "okay";
-+
-+ button-220 {
-+ label = "OK";
-+ linux,code = <KEY_OK>;
-+ channel = <0>;
-+ voltage = <220000>;
-+ };
-+};
-+
-+&mmc1 {
-+ bus-width = <4>;
-+ mmc-pwrseq = <&wifi_pwrseq>;
-+ non-removable;
-+ vmmc-supply = <®_vcc_3v3>;
-+ vqmmc-supply = <®_vcc_3v3>;
-+ pinctrl-0 = <&mmc1_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+
-+ rtl8723ds: wifi@1 {
-+ reg = <1>;
-+ };
-+};
-+
-+&ohci1 {
-+ status = "okay";
-+};
-+
-+&uart1 {
-+ uart-has-rtscts;
-+ pinctrl-0 = <&uart1_pg6_pins>, <&uart1_pg8_rts_cts_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+
-+ bluetooth {
-+ compatible = "realtek,rtl8723ds-bt";
-+ device-wake-gpios = <&pio 6 15 GPIO_ACTIVE_HIGH>; /* PG16 */
-+ enable-gpios = <&pio 6 18 GPIO_ACTIVE_HIGH>; /* PG18 */
-+ host-wake-gpios = <&pio 6 17 GPIO_ACTIVE_HIGH>; /* PG17 */
-+ };
-+};
-+
-+&usbphy {
-+ usb1_vbus-supply = <®_vcc>;
-+};
---- /dev/null
-+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv.dts
-@@ -0,0 +1,84 @@
-+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-+// Copyright (C) 2022 Jisheng Zhang <jszhang@kernel.org>
-+// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
-+
-+/dts-v1/;
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/leds/common.h>
-+
-+#include "sun20i-d1.dtsi"
-+#include "sun20i-d1-common-regulators.dtsi"
-+
-+/ {
-+ model = "Sipeed Lichee RV";
-+ compatible = "sipeed,lichee-rv", "allwinner,sun20i-d1";
-+
-+ aliases {
-+ mmc0 = &mmc0;
-+ serial0 = &uart0;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ led-0 {
-+ color = <LED_COLOR_ID_GREEN>;
-+ function = LED_FUNCTION_STATUS;
-+ gpios = <&pio 2 1 GPIO_ACTIVE_HIGH>; /* PC1 */
-+ };
-+ };
-+
-+ reg_vdd_cpu: vdd-cpu {
-+ compatible = "regulator-fixed";
-+ regulator-name = "vdd-cpu";
-+ regulator-min-microvolt = <900000>;
-+ regulator-max-microvolt = <900000>;
-+ vin-supply = <®_vcc>;
-+ };
-+};
-+
-+&cpu0 {
-+ cpu-supply = <®_vdd_cpu>;
-+};
-+
-+&ehci0 {
-+ status = "okay";
-+};
-+
-+&mmc0 {
-+ broken-cd;
-+ bus-width = <4>;
-+ disable-wp;
-+ vmmc-supply = <®_vcc_3v3>;
-+ vqmmc-supply = <®_vcc_3v3>;
-+ pinctrl-0 = <&mmc0_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+};
-+
-+&ohci0 {
-+ status = "okay";
-+};
-+
-+&uart0 {
-+ pinctrl-0 = <&uart0_pb8_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+};
-+
-+&usb_otg {
-+ dr_mode = "otg";
-+ status = "okay";
-+};
-+
-+&usbphy {
-+ usb0_id_det-gpios = <&pio 3 21 GPIO_ACTIVE_HIGH>; /* PD21 */
-+ usb0_vbus_det-gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
-+ usb0_vbus-supply = <®_vcc>;
-+ status = "okay";
-+};
+++ /dev/null
-From 3cf55c25453517960d72b56d1ba8f12840b1990e Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sat, 9 Jul 2022 17:43:17 -0500
-Subject: [PATCH 031/117] riscv: dts: allwinner: Add MangoPi MQ Pro devicetree
-
-The MangoPi MQ Pro is a tiny SBC with a layout compatible to the
-Raspberry Pi Zero. It includes the Allwinner D1 SoC, 512M or 1G of DDR3,
-and an RTL8723DS-based WiFi/Bluetooth module.
-
-The board also exposes GPIO Port E via a connector on the end of the
-board, which can support either a camera or an RMII Ethernet PHY. The
-additional regulators supply that connector.
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- arch/riscv/boot/dts/allwinner/Makefile | 1 +
- .../allwinner/sun20i-d1-mangopi-mq-pro.dts | 128 ++++++++++++++++++
- 2 files changed, 129 insertions(+)
- create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-mangopi-mq-pro.dts
-
---- a/arch/riscv/boot/dts/allwinner/Makefile
-+++ b/arch/riscv/boot/dts/allwinner/Makefile
-@@ -3,4 +3,5 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-li
- dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-86-panel-720p.dtb
- dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-dock.dtb
- dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv.dtb
-+dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-mangopi-mq-pro.dtb
- dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-nezha.dtb
---- /dev/null
-+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-mangopi-mq-pro.dts
-@@ -0,0 +1,128 @@
-+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-+// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
-+
-+/dts-v1/;
-+
-+#include <dt-bindings/gpio/gpio.h>
-+
-+#include "sun20i-d1.dtsi"
-+#include "sun20i-d1-common-regulators.dtsi"
-+
-+/ {
-+ model = "MangoPi MQ Pro";
-+ compatible = "widora,mangopi-mq-pro", "allwinner,sun20i-d1";
-+
-+ aliases {
-+ ethernet0 = &rtl8723ds;
-+ mmc0 = &mmc0;
-+ serial0 = &uart0;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+
-+ reg_avdd2v8: avdd2v8 {
-+ compatible = "regulator-fixed";
-+ regulator-name = "avdd2v8";
-+ regulator-min-microvolt = <2800000>;
-+ regulator-max-microvolt = <2800000>;
-+ vin-supply = <®_vcc_3v3>;
-+ };
-+
-+ reg_dvdd: dvdd {
-+ compatible = "regulator-fixed";
-+ regulator-name = "dvdd";
-+ regulator-min-microvolt = <1200000>;
-+ regulator-max-microvolt = <1200000>;
-+ vin-supply = <®_vcc_3v3>;
-+ };
-+
-+ reg_vdd_cpu: vdd-cpu {
-+ compatible = "regulator-fixed";
-+ regulator-name = "vdd-cpu";
-+ regulator-min-microvolt = <1100000>;
-+ regulator-max-microvolt = <1100000>;
-+ vin-supply = <®_vcc>;
-+ };
-+
-+ wifi_pwrseq: wifi-pwrseq {
-+ compatible = "mmc-pwrseq-simple";
-+ reset-gpios = <&pio 6 17 GPIO_ACTIVE_LOW>; /* PG17 */
-+ };
-+};
-+
-+&cpu0 {
-+ cpu-supply = <®_vdd_cpu>;
-+};
-+
-+&ehci1 {
-+ status = "okay";
-+};
-+
-+&mmc0 {
-+ bus-width = <4>;
-+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
-+ disable-wp;
-+ vmmc-supply = <®_vcc_3v3>;
-+ vqmmc-supply = <®_vcc_3v3>;
-+ pinctrl-0 = <&mmc0_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+};
-+
-+&mmc1 {
-+ bus-width = <4>;
-+ mmc-pwrseq = <&wifi_pwrseq>;
-+ non-removable;
-+ vmmc-supply = <®_vcc_3v3>;
-+ vqmmc-supply = <®_vcc_3v3>;
-+ pinctrl-0 = <&mmc1_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+
-+ rtl8723ds: wifi@1 {
-+ reg = <1>;
-+ interrupt-parent = <&pio>;
-+ interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 */
-+ interrupt-names = "host-wake";
-+ };
-+};
-+
-+&ohci1 {
-+ status = "okay";
-+};
-+
-+&pio {
-+ vcc-pe-supply = <®_avdd2v8>;
-+};
-+
-+&uart0 {
-+ pinctrl-0 = <&uart0_pb8_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+};
-+
-+&uart1 {
-+ uart-has-rtscts;
-+ pinctrl-0 = <&uart1_pg6_pins>, <&uart1_pg8_rts_cts_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+
-+ bluetooth {
-+ compatible = "realtek,rtl8723ds-bt";
-+ device-wake-gpios = <&pio 6 18 GPIO_ACTIVE_HIGH>; /* PG18 */
-+ enable-gpios = <&pio 6 15 GPIO_ACTIVE_HIGH>; /* PG15 */
-+ host-wake-gpios = <&pio 6 14 GPIO_ACTIVE_HIGH>; /* PG14 */
-+ };
-+};
-+
-+&usb_otg {
-+ dr_mode = "peripheral";
-+ status = "okay";
-+};
-+
-+&usbphy {
-+ usb0_vbus-supply = <®_vcc>;
-+ status = "okay";
-+};
+++ /dev/null
-From 1f26c90ac9cbb60ff315c552368a3bca16562e51 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 10 Jul 2022 11:24:42 -0500
-Subject: [PATCH 032/117] riscv: dts: allwinner: Add Dongshan Nezha STU
- devicetree
-
-The 100ask Dongshan Nezha STU is a system-on-module that can be used
-standalone or with a carrier board. The SoM provides gigabit Ethernet,
-HDMI, a USB peripheral port, and WiFi/Bluetooth via an RTL8723DS chip.
-
-The "DIY" carrier board exposes almost every pin from the D1 SoC to 0.1"
-headers, but contains no digital circuitry, so it does not have its own
-devicetree.
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- arch/riscv/boot/dts/allwinner/Makefile | 1 +
- .../sun20i-d1-dongshan-nezha-stu.dts | 114 ++++++++++++++++++
- 2 files changed, 115 insertions(+)
- create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-dongshan-nezha-stu.dts
-
---- a/arch/riscv/boot/dts/allwinner/Makefile
-+++ b/arch/riscv/boot/dts/allwinner/Makefile
-@@ -1,4 +1,5 @@
- # SPDX-License-Identifier: GPL-2.0
-+dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-dongshan-nezha-stu.dtb
- dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-86-panel-480p.dtb
- dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-86-panel-720p.dtb
- dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-dock.dtb
---- /dev/null
-+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-dongshan-nezha-stu.dts
-@@ -0,0 +1,114 @@
-+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-+// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
-+
-+/dts-v1/;
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/leds/common.h>
-+
-+#include "sun20i-d1.dtsi"
-+#include "sun20i-d1-common-regulators.dtsi"
-+
-+/ {
-+ model = "Dongshan Nezha STU";
-+ compatible = "100ask,dongshan-nezha-stu", "allwinner,sun20i-d1";
-+
-+ aliases {
-+ ethernet0 = &emac;
-+ mmc0 = &mmc0;
-+ serial0 = &uart0;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ led-0 {
-+ color = <LED_COLOR_ID_GREEN>;
-+ function = LED_FUNCTION_STATUS;
-+ gpios = <&pio 2 1 GPIO_ACTIVE_HIGH>; /* PC1 */
-+ };
-+ };
-+
-+ reg_usbvbus: usbvbus {
-+ compatible = "regulator-fixed";
-+ regulator-name = "usbvbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ gpio = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */
-+ enable-active-high;
-+ vin-supply = <®_vcc>;
-+ };
-+
-+ /*
-+ * This regulator is PWM-controlled, but the PWM controller is not
-+ * yet supported, so fix the regulator to its default voltage.
-+ */
-+ reg_vdd_cpu: vdd-cpu {
-+ compatible = "regulator-fixed";
-+ regulator-name = "vdd-cpu";
-+ regulator-min-microvolt = <1100000>;
-+ regulator-max-microvolt = <1100000>;
-+ vin-supply = <®_vcc>;
-+ };
-+};
-+
-+&cpu0 {
-+ cpu-supply = <®_vdd_cpu>;
-+};
-+
-+&ehci0 {
-+ status = "okay";
-+};
-+
-+&emac {
-+ pinctrl-0 = <&rgmii_pe_pins>;
-+ pinctrl-names = "default";
-+ phy-handle = <&ext_rgmii_phy>;
-+ phy-mode = "rgmii-id";
-+ phy-supply = <®_vcc_3v3>;
-+ status = "okay";
-+};
-+
-+&mdio {
-+ ext_rgmii_phy: ethernet-phy@1 {
-+ compatible = "ethernet-phy-ieee802.3-c22";
-+ reg = <1>;
-+ };
-+};
-+
-+&mmc0 {
-+ broken-cd;
-+ bus-width = <4>;
-+ disable-wp;
-+ vmmc-supply = <®_vcc_3v3>;
-+ vqmmc-supply = <®_vcc_3v3>;
-+ pinctrl-0 = <&mmc0_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+};
-+
-+&ohci0 {
-+ status = "okay";
-+};
-+
-+&uart0 {
-+ pinctrl-0 = <&uart0_pb8_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+};
-+
-+&usb_otg {
-+ dr_mode = "otg";
-+ status = "okay";
-+};
-+
-+&usbphy {
-+ usb0_id_det-gpios = <&pio 3 21 GPIO_ACTIVE_HIGH>; /* PD21 */
-+ usb0_vbus_det-gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
-+ usb0_vbus-supply = <®_usbvbus>;
-+ status = "okay";
-+};
+++ /dev/null
-From 11f692c6b009f36b9a91d5ceb5998ae15e57f18c Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 10 Jul 2022 23:43:49 -0500
-Subject: [PATCH 033/117] riscv: dts: allwinner: Add ClockworkPi and DevTerm
- devicetrees
-
-Clockwork Tech manufactures several SoMs for their RasPi CM3-compatible
-"ClockworkPi" mainboard. Their R-01 SoM features the Allwinner D1 SoC.
-The R-01 contains only the CPU, DRAM, and always-on voltage regulation;
-it does not merit a separate devicetree.
-
-The ClockworkPi mainboard features analog audio, a MIPI-DSI panel, USB
-host and peripheral ports, an Ampak AP6256 WiFi/Bluetooth module, and an
-X-Powers AXP228 PMIC for managing a Li-ion battery.
-
-The DevTerm is a complete system which extends the ClockworkPi mainboard
-with a pair of expansion boards. These expansion boards provide a fan, a
-keyboard, speakers, and a thermal printer.
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- arch/riscv/boot/dts/allwinner/Makefile | 2 +
- .../allwinner/sun20i-d1-clockworkpi-v3.14.dts | 242 ++++++++++++++++++
- .../dts/allwinner/sun20i-d1-devterm-v3.14.dts | 37 +++
- 3 files changed, 281 insertions(+)
- create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-clockworkpi-v3.14.dts
- create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-devterm-v3.14.dts
-
---- a/arch/riscv/boot/dts/allwinner/Makefile
-+++ b/arch/riscv/boot/dts/allwinner/Makefile
-@@ -1,4 +1,6 @@
- # SPDX-License-Identifier: GPL-2.0
-+dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-clockworkpi-v3.14.dtb
-+dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-devterm-v3.14.dtb
- dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-dongshan-nezha-stu.dtb
- dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-86-panel-480p.dtb
- dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-86-panel-720p.dtb
---- /dev/null
-+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-clockworkpi-v3.14.dts
-@@ -0,0 +1,242 @@
-+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-+// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
-+
-+/dts-v1/;
-+
-+#include <dt-bindings/gpio/gpio.h>
-+
-+#include "sun20i-d1.dtsi"
-+#include "sun20i-d1-common-regulators.dtsi"
-+
-+/ {
-+ model = "ClockworkPi v3.14 (R-01)";
-+ compatible = "clockwork,r-01-clockworkpi-v3.14", "allwinner,sun20i-d1";
-+
-+ aliases {
-+ ethernet0 = &ap6256;
-+ mmc0 = &mmc0;
-+ serial0 = &uart0;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+
-+ /*
-+ * This regulator is PWM-controlled, but the PWM controller is not
-+ * yet supported, so fix the regulator to its default voltage.
-+ */
-+ reg_vdd_cpu: vdd-cpu {
-+ compatible = "regulator-fixed";
-+ regulator-name = "vdd-cpu";
-+ regulator-min-microvolt = <1100000>;
-+ regulator-max-microvolt = <1100000>;
-+ vin-supply = <®_vcc>;
-+ };
-+
-+ wifi_pwrseq: wifi-pwrseq {
-+ compatible = "mmc-pwrseq-simple";
-+ reset-gpios = <&pio 6 11 GPIO_ACTIVE_LOW>; /* PG11/GPIO3 */
-+ };
-+};
-+
-+&cpu0 {
-+ cpu-supply = <®_vdd_cpu>;
-+};
-+
-+&ehci1 {
-+ status = "okay";
-+};
-+
-+&i2c0 {
-+ pinctrl-0 = <&i2c0_pb10_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+
-+ axp221: pmic@34 {
-+ compatible = "x-powers,axp228", "x-powers,axp221";
-+ reg = <0x34>;
-+ interrupt-parent = <&pio>;
-+ interrupts = <4 9 IRQ_TYPE_LEVEL_LOW>; /* PE9/GPIO2 */
-+ interrupt-controller;
-+ #interrupt-cells = <1>;
-+
-+ ac_power_supply: ac-power {
-+ compatible = "x-powers,axp221-ac-power-supply";
-+ };
-+
-+ axp_adc: adc {
-+ compatible = "x-powers,axp221-adc";
-+ #io-channel-cells = <1>;
-+ };
-+
-+ battery_power_supply: battery-power {
-+ compatible = "x-powers,axp221-battery-power-supply";
-+ };
-+
-+ regulators {
-+ x-powers,dcdc-freq = <3000>;
-+
-+ reg_dcdc1: dcdc1 {
-+ regulator-name = "sys-3v3";
-+ regulator-always-on;
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ };
-+
-+ reg_dcdc3: dcdc3 {
-+ regulator-name = "sys-1v8";
-+ regulator-always-on;
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ };
-+
-+ reg_aldo1: aldo1 {
-+ regulator-name = "aud-3v3";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ };
-+
-+ reg_aldo2: aldo2 {
-+ regulator-name = "disp-3v3";
-+ regulator-always-on;
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ };
-+
-+ reg_aldo3: aldo3 {
-+ regulator-name = "vdd-wifi";
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ };
-+
-+ /* DLDO1 and ELDO1-3 are connected in parallel. */
-+ reg_dldo1: dldo1 {
-+ regulator-name = "vbat-wifi-a";
-+ regulator-always-on;
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ };
-+
-+ /* DLDO2-DLDO4 are connected in parallel. */
-+ reg_dldo2: dldo2 {
-+ regulator-name = "vcc-3v3-ext-a";
-+ regulator-always-on;
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ };
-+
-+ reg_dldo3: dldo3 {
-+ regulator-name = "vcc-3v3-ext-b";
-+ regulator-always-on;
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ };
-+
-+ reg_dldo4: dldo4 {
-+ regulator-name = "vcc-3v3-ext-c";
-+ regulator-always-on;
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ };
-+
-+ reg_eldo1: eldo1 {
-+ regulator-name = "vbat-wifi-b";
-+ regulator-always-on;
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ };
-+
-+ reg_eldo2: eldo2 {
-+ regulator-name = "vbat-wifi-c";
-+ regulator-always-on;
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ };
-+
-+ reg_eldo3: eldo3 {
-+ regulator-name = "vbat-wifi-d";
-+ regulator-always-on;
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ };
-+ };
-+
-+ usb_power_supply: usb-power {
-+ compatible = "x-powers,axp221-usb-power-supply";
-+ status = "disabled";
-+ };
-+ };
-+};
-+
-+&mmc0 {
-+ broken-cd;
-+ bus-width = <4>;
-+ disable-wp;
-+ vmmc-supply = <®_dcdc1>;
-+ vqmmc-supply = <®_vcc_3v3>;
-+ pinctrl-0 = <&mmc0_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+};
-+
-+&mmc1 {
-+ bus-width = <4>;
-+ mmc-pwrseq = <&wifi_pwrseq>;
-+ non-removable;
-+ vmmc-supply = <®_dldo1>;
-+ vqmmc-supply = <®_aldo3>;
-+ pinctrl-0 = <&mmc1_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+
-+ ap6256: wifi@1 {
-+ compatible = "brcm,bcm43456-fmac", "brcm,bcm4329-fmac";
-+ reg = <1>;
-+ interrupt-parent = <&pio>;
-+ interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10/GPIO4 */
-+ interrupt-names = "host-wake";
-+ };
-+};
-+
-+&ohci1 {
-+ status = "okay";
-+};
-+
-+&pio {
-+ vcc-pg-supply = <®_ldoa>;
-+};
-+
-+&uart0 {
-+ pinctrl-0 = <&uart0_pb8_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+};
-+
-+&uart1 {
-+ uart-has-rtscts;
-+ pinctrl-0 = <&uart1_pg6_pins>, <&uart1_pg8_rts_cts_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+
-+ bluetooth {
-+ compatible = "brcm,bcm4345c5";
-+ interrupt-parent = <&pio>;
-+ interrupts = <6 17 IRQ_TYPE_LEVEL_HIGH>; /* PG17/GPIO6 */
-+ device-wakeup-gpios = <&pio 6 16 GPIO_ACTIVE_HIGH>; /* PG16/GPIO7 */
-+ shutdown-gpios = <&pio 6 18 GPIO_ACTIVE_HIGH>; /* PG18/GPIO5 */
-+ max-speed = <1500000>;
-+ vbat-supply = <®_dldo1>;
-+ vddio-supply = <®_aldo3>;
-+ };
-+};
-+
-+&usb_otg {
-+ dr_mode = "peripheral";
-+ status = "okay";
-+};
-+
-+&usbphy {
-+ usb0_vbus_power-supply = <&ac_power_supply>;
-+ status = "okay";
-+};
---- /dev/null
-+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-devterm-v3.14.dts
-@@ -0,0 +1,37 @@
-+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-+// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
-+
-+/dts-v1/;
-+
-+#include "sun20i-d1-clockworkpi-v3.14.dts"
-+
-+/ {
-+ model = "Clockwork DevTerm (R-01)";
-+ compatible = "clockwork,r-01-devterm-v3.14",
-+ "clockwork,r-01-clockworkpi-v3.14",
-+ "allwinner,sun20i-d1";
-+
-+ fan {
-+ compatible = "gpio-fan";
-+ gpios = <&pio 3 10 GPIO_ACTIVE_HIGH>; /* PD10/GPIO41 */
-+ gpio-fan,speed-map = <0 0>,
-+ <6000 1>;
-+ #cooling-cells = <2>;
-+ };
-+
-+ i2c-gpio-0 {
-+ compatible = "i2c-gpio";
-+ sda-gpios = <&pio 3 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PD14/GPIO44 */
-+ scl-gpios = <&pio 3 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PD15/GPIO45 */
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ adc@54 {
-+ compatible = "ti,adc101c";
-+ reg = <0x54>;
-+ interrupt-parent = <&pio>;
-+ interrupts = <4 12 IRQ_TYPE_LEVEL_LOW>; /* PE12/GPIO35 */
-+ vref-supply = <®_dldo2>;
-+ };
-+ };
-+};
+++ /dev/null
-From f648ec2a040efde432876ee04240cb71e4c24d6e Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 16 May 2021 14:17:45 -0500
-Subject: [PATCH 034/117] riscv: Add the Allwinner SoC family Kconfig option
-
-Allwinner manufactures the sunxi family of application processors. This
-includes the "sun8i" series of ARMv7 SoCs, the "sun50i" series of ARMv8
-SoCs, and now the "sun20i" series of 64-bit RISC-V SoCs.
-
-The first SoC in the sun20i series is D1, containing a single T-HEAD
-C906 core. D1s is a low-pin-count variant of D1 with co-packaged DRAM.
-
-Most peripherals are shared across the entire chip family. In fact, the
-ARMv7 T113 SoC is pin-compatible and almost entirely register-compatible
-with the D1s.
-
-This means many existing device drivers can be reused. To facilitate
-this reuse, name the symbol ARCH_SUNXI, since that is what the existing
-drivers have as their dependency.
-
-Reviewed-by: Heiko Stuebner <heiko@sntech.de>
-Tested-by: Heiko Stuebner <heiko@sntech.de>
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- arch/riscv/Kconfig.socs | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/arch/riscv/Kconfig.socs
-+++ b/arch/riscv/Kconfig.socs
-@@ -1,5 +1,14 @@
- menu "SoC selection"
-
-+config ARCH_SUNXI
-+ bool "Allwinner sun20i SoCs"
-+ select ERRATA_THEAD if MMU && !XIP_KERNEL
-+ select SIFIVE_PLIC
-+ select SUN4I_TIMER
-+ help
-+ This enables support for Allwinner sun20i platform hardware,
-+ including boards based on the D1 and D1s SoCs.
-+
- config SOC_MICROCHIP_POLARFIRE
- bool "Microchip PolarFire SoCs"
- select MCHP_CLK_MPFS
+++ /dev/null
-From 73f9cc8568b6b821107d5194fa868e922b159091 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Mon, 27 Jun 2022 01:33:05 -0500
-Subject: [PATCH 035/117] riscv: defconfig: Enable the Allwinner D1 platform
- and drivers
-
-Now that several D1-based boards are supported, enable the platform in
-our defconfig. Build in the drivers which are necessary to boot, such as
-the pinctrl, MMC, RTC (which provides critical clocks), SPI (for flash),
-and watchdog (which may be left enabled by the bootloader). Other common
-onboard peripherals are enabled as modules.
-
-Cover-letter:
-riscv: Allwinner D1 platform support
-This series adds the Kconfig/defconfig plumbing and devicetrees for a
-range of Allwinner D1-based boards. Many features are already enabled,
-including USB, Ethernet, and WiFi.
-
-The SoC devicetree uses bindings from the following series which have
-not yet been merged:
-- SRAM controller:
- https://lore.kernel.org/lkml/20220815041248.53268-1-samuel@sholland.org/
-- NVMEM cell bits property change:
- https://lore.kernel.org/lkml/20220814173656.11856-1-samuel@sholland.org/
-- In-package LDO regulators:
- https://lore.kernel.org/lkml/20220815043436.20170-1-samuel@sholland.org/
-
-All three of these are required to set the correct I/O domain voltages
-in the pin controller, which I would consider important to have in the
-initial version of the devicetree.
-
-The SoC devicetree does contain one small hack to avoid a dependency on
-the audio codec binding, since that is not ready yet: the codec node
-uses a bare "simple-mfd", "syscon" compatible.
-END
-
-Series-to: Chen-Yu Tsai <wens@csie.org>
-Series-to: Jernej Skrabec <jernej.skrabec@gmail.com>
-Series-to: linux-sunxi@lists.linux.dev
-Series-to: Palmer Dabbelt <palmer@dabbelt.com>
-Series-to: Paul Walmsley <paul.walmsley@sifive.com>
-Series-to: Albert Ou <aou@eecs.berkeley.edu>
-Series-to: linux-riscv@lists.infradead.org
-Series-cc: Rob Herring <robh+dt@kernel.org>
-Series-cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
-Series-cc: devicetree@vger.kernel.org
-Series-cc: linux-kernel@vger.kernel.org
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- arch/riscv/configs/defconfig | 23 ++++++++++++++++++++++-
- 1 file changed, 22 insertions(+), 1 deletion(-)
-
---- a/arch/riscv/configs/defconfig
-+++ b/arch/riscv/configs/defconfig
-@@ -25,6 +25,7 @@ CONFIG_BLK_DEV_INITRD=y
- CONFIG_EXPERT=y
- # CONFIG_SYSFS_SYSCALL is not set
- CONFIG_PROFILING=y
-+CONFIG_ARCH_SUNXI=y
- CONFIG_SOC_MICROCHIP_POLARFIRE=y
- CONFIG_SOC_SIFIVE=y
- CONFIG_SOC_STARFIVE=y
-@@ -118,22 +119,31 @@ CONFIG_VIRTIO_NET=y
- CONFIG_MACB=y
- CONFIG_E1000E=y
- CONFIG_R8169=y
-+CONFIG_STMMAC_ETH=m
- CONFIG_MICROSEMI_PHY=y
- CONFIG_INPUT_MOUSEDEV=y
-+CONFIG_KEYBOARD_SUN4I_LRADC=m
- CONFIG_SERIAL_8250=y
- CONFIG_SERIAL_8250_CONSOLE=y
-+CONFIG_SERIAL_8250_DW=y
- CONFIG_SERIAL_OF_PLATFORM=y
- CONFIG_VIRTIO_CONSOLE=y
- CONFIG_HW_RANDOM=y
- CONFIG_HW_RANDOM_VIRTIO=y
-+CONFIG_I2C_MV64XXX=m
- CONFIG_SPI=y
- CONFIG_SPI_SIFIVE=y
-+CONFIG_SPI_SUN6I=y
- # CONFIG_PTP_1588_CLOCK is not set
--CONFIG_GPIOLIB=y
- CONFIG_GPIO_SIFIVE=y
-+CONFIG_WATCHDOG=y
-+CONFIG_SUNXI_WATCHDOG=y
-+CONFIG_REGULATOR=y
-+CONFIG_REGULATOR_FIXED_VOLTAGE=y
- CONFIG_DRM=m
- CONFIG_DRM_RADEON=m
- CONFIG_DRM_NOUVEAU=m
-+CONFIG_DRM_SUN4I=m
- CONFIG_DRM_VIRTIO_GPU=m
- CONFIG_FB=y
- CONFIG_FRAMEBUFFER_CONSOLE=y
-@@ -146,19 +156,30 @@ CONFIG_USB_OHCI_HCD=y
- CONFIG_USB_OHCI_HCD_PLATFORM=y
- CONFIG_USB_STORAGE=y
- CONFIG_USB_UAS=y
-+CONFIG_USB_MUSB_HDRC=m
-+CONFIG_USB_MUSB_SUNXI=m
-+CONFIG_NOP_USB_XCEIV=m
- CONFIG_MMC=y
- CONFIG_MMC_SDHCI=y
- CONFIG_MMC_SDHCI_PLTFM=y
- CONFIG_MMC_SDHCI_CADENCE=y
- CONFIG_MMC_SPI=y
-+CONFIG_MMC_SUNXI=y
- CONFIG_RTC_CLASS=y
-+CONFIG_RTC_DRV_SUN6I=y
-+CONFIG_DMADEVICES=y
-+CONFIG_DMA_SUN6I=m
- CONFIG_VIRTIO_PCI=y
- CONFIG_VIRTIO_BALLOON=y
- CONFIG_VIRTIO_INPUT=y
- CONFIG_VIRTIO_MMIO=y
-+CONFIG_SUN8I_DE2_CCU=m
-+CONFIG_SUN50I_IOMMU=y
- CONFIG_RPMSG_CHAR=y
- CONFIG_RPMSG_CTRL=y
- CONFIG_RPMSG_VIRTIO=y
-+CONFIG_PHY_SUN4I_USB=m
-+CONFIG_NVMEM_SUNXI_SID=y
- CONFIG_EXT4_FS=y
- CONFIG_EXT4_FS_POSIX_ACL=y
- CONFIG_EXT4_FS_SECURITY=y
+++ /dev/null
-From bf83f1dc034111aac1f23b98d7205d08c7c83208 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Wed, 17 Aug 2022 02:33:25 -0500
-Subject: [PATCH 036/117] riscv: dts: allwinner: Add Bluetooth PCM audio
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- .../allwinner/sun20i-d1-clockworkpi-v3.14.dts | 47 +++++++++++++++++++
- 1 file changed, 47 insertions(+)
-
---- a/arch/riscv/boot/dts/allwinner/sun20i-d1-clockworkpi-v3.14.dts
-+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-clockworkpi-v3.14.dts
-@@ -22,6 +22,32 @@
- stdout-path = "serial0:115200n8";
- };
-
-+ bt_sco_codec: bt-sco-codec {
-+ #sound-dai-cells = <0>;
-+ compatible = "linux,bt-sco";
-+ };
-+
-+ bt-sound {
-+ compatible = "simple-audio-card";
-+ simple-audio-card,name = "Bluetooth";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ simple-audio-card,dai-link@0 {
-+ format = "dsp_a";
-+ frame-master = <&bt_sound_cpu>;
-+ bitclock-master = <&bt_sound_cpu>;
-+
-+ bt_sound_cpu: cpu {
-+ sound-dai = <&i2s1>;
-+ };
-+
-+ codec {
-+ sound-dai = <&bt_sco_codec>;
-+ };
-+ };
-+ };
-+
- /*
- * This regulator is PWM-controlled, but the PWM controller is not
- * yet supported, so fix the regulator to its default voltage.
-@@ -169,6 +195,12 @@
- };
- };
-
-+&i2s1 {
-+ pinctrl-0 = <&i2s1_clk_pins>, <&i2s1_din_pin>, <&i2s1_dout_pin>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+};
-+
- &mmc0 {
- broken-cd;
- bus-width = <4>;
-@@ -205,6 +237,21 @@
-
- &pio {
- vcc-pg-supply = <®_ldoa>;
-+
-+ i2s1_clk_pins: i2s1-clk-pins {
-+ pins = "PG12", "PG13";
-+ function = "i2s1";
-+ };
-+
-+ i2s1_din_pin: i2s1-din-pin {
-+ pins = "PG14";
-+ function = "i2s1_din";
-+ };
-+
-+ i2s1_dout_pin: i2s1-dout-pin {
-+ pins = "PG15";
-+ function = "i2s1_dout";
-+ };
- };
-
- &uart0 {
+++ /dev/null
-From 690b8d708e0193d50522f70359bcab62a2f99742 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 14 Nov 2021 09:04:29 -0600
-Subject: [PATCH 037/117] dt-bindings: crypto: sun8i-ce: Add compatible for D1
-
-D1 has a crypto engine similar to the one in other Allwinner SoCs.
-Like H6, it has a separate MBUS clock gate.
-
-It also requires the internal RC oscillator to be enabled for the TRNG
-to return data. This is likely the case for earlier variants as well,
-but the clock drivers for earlier SoCs did not allow disabling the RC
-oscillator.
-
-Series-changes: 2
- - Add TRNG clock
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- .../bindings/crypto/allwinner,sun8i-ce.yaml | 31 ++++++++++++++-----
- 1 file changed, 23 insertions(+), 8 deletions(-)
-
---- a/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml
-+++ b/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml
-@@ -14,6 +14,7 @@ properties:
- enum:
- - allwinner,sun8i-h3-crypto
- - allwinner,sun8i-r40-crypto
-+ - allwinner,sun20i-d1-crypto
- - allwinner,sun50i-a64-crypto
- - allwinner,sun50i-h5-crypto
- - allwinner,sun50i-h6-crypto
-@@ -29,6 +30,7 @@ properties:
- - description: Bus clock
- - description: Module clock
- - description: MBus clock
-+ - description: TRNG clock (RC oscillator)
- minItems: 2
-
- clock-names:
-@@ -36,6 +38,7 @@ properties:
- - const: bus
- - const: mod
- - const: ram
-+ - const: trng
- minItems: 2
-
- resets:
-@@ -44,19 +47,31 @@ properties:
- if:
- properties:
- compatible:
-- const: allwinner,sun50i-h6-crypto
-+ enum:
-+ - allwinner,sun20i-d1-crypto
- then:
- properties:
- clocks:
-- minItems: 3
-+ minItems: 4
- clock-names:
-- minItems: 3
-+ minItems: 4
- else:
-- properties:
-- clocks:
-- maxItems: 2
-- clock-names:
-- maxItems: 2
-+ if:
-+ properties:
-+ compatible:
-+ const: allwinner,sun50i-h6-crypto
-+ then:
-+ properties:
-+ clocks:
-+ minItems: 3
-+ clock-names:
-+ minItems: 3
-+ else:
-+ properties:
-+ clocks:
-+ maxItems: 2
-+ clock-names:
-+ maxItems: 2
-
- required:
- - compatible
+++ /dev/null
-From d09357656ae3985095f562cf005fa94fd61ebfe6 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Tue, 1 Feb 2022 21:50:16 -0600
-Subject: [PATCH 038/117] crypto: sun8i-ce - Add TRNG clock to D1 variant
-
-At least the D1 variant requires a separate clock for the TRNG.
-Without this clock enabled, reading from /dev/hwrng reports:
-
- sun8i-ce 3040000.crypto: DMA timeout for TRNG (tm=96) on flow 3
-
-Experimentation shows that the necessary clock is the SoC's internal
-RC oscillator. This makes sense, as the oscillator's frequency
-variations can be used as a source of randomness.
-
-Since D1 does not yet have a device tree, we can update this variant
-without breaking anything.
-
-Series-changes: 2
- - New patch
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- drivers/crypto/allwinner/sun8i-ce/sun8i-ce-core.c | 1 +
- drivers/crypto/allwinner/sun8i-ce/sun8i-ce.h | 2 +-
- 2 files changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/crypto/allwinner/sun8i-ce/sun8i-ce-core.c
-+++ b/drivers/crypto/allwinner/sun8i-ce/sun8i-ce-core.c
-@@ -118,6 +118,7 @@ static const struct ce_variant ce_d1_var
- { "bus", 0, 200000000 },
- { "mod", 300000000, 0 },
- { "ram", 0, 400000000 },
-+ { "trng", 0, 0 },
- },
- .esr = ESR_D1,
- .prng = CE_ALG_PRNG,
---- a/drivers/crypto/allwinner/sun8i-ce/sun8i-ce.h
-+++ b/drivers/crypto/allwinner/sun8i-ce/sun8i-ce.h
-@@ -105,7 +105,7 @@
-
- #define MAX_SG 8
-
--#define CE_MAX_CLOCKS 3
-+#define CE_MAX_CLOCKS 4
-
- #define MAXFLOW 4
-
+++ /dev/null
-From 5dae72bf0e0fabb3164dbc4b5eee310c63f1975c Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Thu, 11 Aug 2022 22:20:31 -0500
-Subject: [PATCH 039/117] riscv: dts: allwinner: d1: Add crypto engine support
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi | 12 ++++++++++++
- 1 file changed, 12 insertions(+)
-
---- a/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
-+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
-@@ -457,6 +457,18 @@
- };
- };
-
-+ crypto: crypto@3040000 {
-+ compatible = "allwinner,sun20i-d1-crypto";
-+ reg = <0x3040000 0x800>;
-+ interrupts = <68 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_CE>,
-+ <&ccu CLK_CE>,
-+ <&ccu CLK_MBUS_CE>,
-+ <&rtc CLK_IOSC>;
-+ clock-names = "bus", "mod", "ram", "trng";
-+ resets = <&ccu RST_BUS_CE>;
-+ };
-+
- mbus: dram-controller@3102000 {
- compatible = "allwinner,sun20i-d1-mbus";
- reg = <0x3102000 0x1000>,
+++ /dev/null
-From 7a24e5ee94e0163801c8ab4c131ae1d530a420ea Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Wed, 17 Aug 2022 02:08:36 -0500
-Subject: [PATCH 040/117] ASoC: sun50i-dmic: dt-bindings: Add D1 compatible
- string
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- .../bindings/sound/allwinner,sun50i-h6-dmic.yaml | 7 ++++++-
- 1 file changed, 6 insertions(+), 1 deletion(-)
-
---- a/Documentation/devicetree/bindings/sound/allwinner,sun50i-h6-dmic.yaml
-+++ b/Documentation/devicetree/bindings/sound/allwinner,sun50i-h6-dmic.yaml
-@@ -11,7 +11,12 @@ maintainers:
-
- properties:
- compatible:
-- const: allwinner,sun50i-h6-dmic
-+ oneOf:
-+ - items:
-+ - enum:
-+ - allwinner,sun20i-d1-dmic
-+ - const: allwinner,sun50i-h6-dmic
-+ - const: allwinner,sun50i-h6-dmic
-
- "#sound-dai-cells":
- const: 0
+++ /dev/null
-From d73f2176958e405e55c4e782c6d0f888e20080e5 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Wed, 17 Aug 2022 02:08:58 -0500
-Subject: [PATCH 041/117] riscv: dts: allwinner: d1: Add DMIC node
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi | 15 +++++++++++++++
- 1 file changed, 15 insertions(+)
-
---- a/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
-+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
-@@ -208,6 +208,21 @@
- };
- };
-
-+ dmic: dmic@2031000 {
-+ compatible = "allwinner,sun20i-d1-dmic",
-+ "allwinner,sun50i-h6-dmic";
-+ reg = <0x2031000 0x400>;
-+ interrupts = <40 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_DMIC>,
-+ <&ccu CLK_DMIC>;
-+ clock-names = "bus", "mod";
-+ resets = <&ccu RST_BUS_DMIC>;
-+ dmas = <&dma 8>;
-+ dma-names = "rx";
-+ status = "disabled";
-+ #sound-dai-cells = <0>;
-+ };
-+
- i2s0: i2s@2032000 {
- compatible = "allwinner,sun20i-d1-i2s",
- "allwinner,sun50i-r329-i2s";
+++ /dev/null
-From 500a3fc1ce1b216ef4f4df73e4e048170764189e Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Wed, 17 Aug 2022 02:20:49 -0500
-Subject: [PATCH 042/117] riscv: dts: allwinner: Add DMIC sound cards
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- .../sun20i-d1-lichee-rv-86-panel.dtsi | 43 ++++++++++++++++++
- .../allwinner/sun20i-d1-lichee-rv-dock.dts | 45 +++++++++++++++++++
- 2 files changed, 88 insertions(+)
-
---- a/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel.dtsi
-+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel.dtsi
-@@ -9,6 +9,33 @@
- ethernet1 = &xr829;
- };
-
-+ dmic_codec: dmic-codec {
-+ compatible = "dmic-codec";
-+ num-channels = <2>;
-+ #sound-dai-cells = <0>;
-+ };
-+
-+ dmic-sound {
-+ compatible = "simple-audio-card";
-+ simple-audio-card,name = "DMIC";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ simple-audio-card,dai-link@0 {
-+ format = "pdm";
-+ frame-master = <&link0_cpu>;
-+ bitclock-master = <&link0_cpu>;
-+
-+ link0_cpu: cpu {
-+ sound-dai = <&dmic>;
-+ };
-+
-+ link0_codec: codec {
-+ sound-dai = <&dmic_codec>;
-+ };
-+ };
-+ };
-+
- /* PC1 is repurposed as BT_WAKE_AP */
- /delete-node/ leds;
-
-@@ -24,6 +51,12 @@
- };
- };
-
-+&dmic {
-+ pinctrl-0 = <&dmic_pb11_d0_pin>, <&dmic_pe17_clk_pin>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+};
-+
- &ehci1 {
- status = "okay";
- };
-@@ -69,6 +102,16 @@
- pins = "PG11";
- function = "clk";
- };
-+
-+ dmic_pb11_d0_pin: dmic-pb11-d0-pin {
-+ pins = "PB11";
-+ function = "dmic";
-+ };
-+
-+ dmic_pe17_clk_pin: dmic-pe17-clk-pin {
-+ pins = "PE17";
-+ function = "dmic";
-+ };
- };
-
- &uart1 {
---- a/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dts
-+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dts
-@@ -15,12 +15,45 @@
- ethernet1 = &rtl8723ds;
- };
-
-+ dmic_codec: dmic-codec {
-+ compatible = "dmic-codec";
-+ num-channels = <2>;
-+ #sound-dai-cells = <0>;
-+ };
-+
-+ dmic-sound {
-+ compatible = "simple-audio-card";
-+ simple-audio-card,name = "DMIC";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ simple-audio-card,dai-link@0 {
-+ format = "pdm";
-+ frame-master = <&link0_cpu>;
-+ bitclock-master = <&link0_cpu>;
-+
-+ link0_cpu: cpu {
-+ sound-dai = <&dmic>;
-+ };
-+
-+ link0_codec: codec {
-+ sound-dai = <&dmic_codec>;
-+ };
-+ };
-+ };
-+
- wifi_pwrseq: wifi-pwrseq {
- compatible = "mmc-pwrseq-simple";
- reset-gpios = <&pio 6 12 GPIO_ACTIVE_LOW>; /* PG12 */
- };
- };
-
-+&dmic {
-+ pinctrl-0 = <&dmic_pb11_d0_pin>, <&dmic_pe17_clk_pin>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+};
-+
- &ehci1 {
- status = "okay";
- };
-@@ -55,6 +88,18 @@
- status = "okay";
- };
-
-+&pio {
-+ dmic_pb11_d0_pin: dmic-pb11-d0-pin {
-+ pins = "PB11";
-+ function = "dmic";
-+ };
-+
-+ dmic_pe17_clk_pin: dmic-pe17-clk-pin {
-+ pins = "PE17";
-+ function = "dmic";
-+ };
-+};
-+
- &uart1 {
- uart-has-rtscts;
- pinctrl-0 = <&uart1_pg6_pins>, <&uart1_pg8_rts_cts_pins>;
+++ /dev/null
-From 7708f7471ab45039e08237b42121d0372f9216a7 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 13 Jun 2021 23:42:19 -0500
-Subject: [PATCH 043/117] hwspinlock: sun6i: Clarify bank counting logic
-
-In some of the most recent datasheets, the register definition was
-updated in a way that resolves the conflict here: the field is only two
-bits wide, and a value of "4" really means a bit pattern of "0". Correct
-the code to reflect this, but leave an updated comment because some
-datasheets still have incorrect information in them.
-
-Fixes: 3c881e05c814 ("hwspinlock: add sun6i hardware spinlock support")
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- drivers/hwspinlock/sun6i_hwspinlock.c | 36 +++++++++++----------------
- 1 file changed, 14 insertions(+), 22 deletions(-)
-
---- a/drivers/hwspinlock/sun6i_hwspinlock.c
-+++ b/drivers/hwspinlock/sun6i_hwspinlock.c
-@@ -129,30 +129,22 @@ static int sun6i_hwspinlock_probe(struct
- }
-
- /*
-- * bit 28 and 29 represents the hwspinlock setup
-+ * Bits 28 and 29 represent the number of available locks.
- *
-- * every datasheet (A64, A80, A83T, H3, H5, H6 ...) says the default value is 0x1 and 0x1
-- * to 0x4 represent 32, 64, 128 and 256 locks
-- * but later datasheets (H5, H6) say 00, 01, 10, 11 represent 32, 64, 128 and 256 locks,
-- * but that would mean H5 and H6 have 64 locks, while their datasheets talk about 32 locks
-- * all the time, not a single mentioning of 64 locks
-- * the 0x4 value is also not representable by 2 bits alone, so some datasheets are not
-- * correct
-- * one thing have all in common, default value of the sysstatus register is 0x10000000,
-- * which results in bit 28 being set
-- * this is the reason 0x1 is considered being 32 locks and bit 30 is taken into account
-- * verified on H2+ (datasheet 0x1 = 32 locks) and H5 (datasheet 01 = 64 locks)
-+ * The datasheets have two conflicting interpretations for these bits:
-+ * | 00 | 01 | 10 | 11 |
-+ * +-----+----+-----+-----+
-+ * | 256 | 32 | 64 | 128 | A80, A83T, H3, A64, A50, D1
-+ * | 32 | 64 | 128 | 256 | H5, H6, R329
-+ * where some datasheets use "4" instead of "0" for the first column.
-+ *
-+ * Experiments shows that the first interpretation is correct, as all
-+ * known implementations report the value "1" and have 32 spinlocks.
- */
-- num_banks = readl(io_base + SPINLOCK_SYSSTATUS_REG) >> 28;
-- switch (num_banks) {
-- case 1 ... 4:
-- priv->nlocks = 1 << (4 + num_banks);
-- break;
-- default:
-- err = -EINVAL;
-- dev_err(&pdev->dev, "unsupported hwspinlock setup (%d)\n", num_banks);
-- goto bank_fail;
-- }
-+ num_banks = readl(io_base + SPINLOCK_SYSSTATUS_REG) >> 28 & 0x3;
-+ if (!num_banks)
-+ num_banks = 4;
-+ priv->nlocks = 1 << (4 + num_banks);
-
- priv->bank = devm_kzalloc(&pdev->dev, struct_size(priv->bank, lock, priv->nlocks),
- GFP_KERNEL);
+++ /dev/null
-From a19b55088945ce86051ea4eab22df27805a30c71 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 13 Jun 2021 23:41:44 -0500
-Subject: [PATCH 044/117] hwspinlock: sun6i: Fix driver to match binding
-
-The binding for this device does not allow using the clock-names and
-reset-names properties, so the driver should not reference the clock or
-reset by name.
-
-Fixes: 3c881e05c814 ("hwspinlock: add sun6i hardware spinlock support")
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- drivers/hwspinlock/sun6i_hwspinlock.c | 12 +++++-------
- 1 file changed, 5 insertions(+), 7 deletions(-)
-
---- a/drivers/hwspinlock/sun6i_hwspinlock.c
-+++ b/drivers/hwspinlock/sun6i_hwspinlock.c
-@@ -104,14 +104,12 @@ static int sun6i_hwspinlock_probe(struct
- if (!priv)
- return -ENOMEM;
-
-- priv->ahb_clk = devm_clk_get(&pdev->dev, "ahb");
-- if (IS_ERR(priv->ahb_clk)) {
-- err = PTR_ERR(priv->ahb_clk);
-- dev_err(&pdev->dev, "unable to get AHB clock (%d)\n", err);
-- return err;
-- }
-+ priv->ahb_clk = devm_clk_get(&pdev->dev, NULL);
-+ if (IS_ERR(priv->ahb_clk))
-+ return dev_err_probe(&pdev->dev, PTR_ERR(priv->ahb_clk),
-+ "unable to get AHB clock\n");
-
-- priv->reset = devm_reset_control_get(&pdev->dev, "ahb");
-+ priv->reset = devm_reset_control_get(&pdev->dev, NULL);
- if (IS_ERR(priv->reset))
- return dev_err_probe(&pdev->dev, PTR_ERR(priv->reset),
- "unable to get reset control\n");
+++ /dev/null
-From f0c29c5d370507ca2106689e7e17b81e8b58f236 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 14 Nov 2021 11:37:34 -0600
-Subject: [PATCH 045/117] dt-bindings: hwlock: sun6i: Add interrupts property
-
-While it was not officially documented until recently (e.g. A50), the
-hwspinlock block can trigger an interrupt when a lock is unlocked. This
-capability is used by Allwinner's ARISC firmware, it has been verified
-to work on A64, and the IRQ numbers are reserved as far back as A31.
-So most likely this feature has always been available.
-
-Even though the Linux hwspinlock framework cannot make use of the IRQ,
-the capability should still be documented in the device tree.
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- .../bindings/hwlock/allwinner,sun6i-a31-hwspinlock.yaml | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/Documentation/devicetree/bindings/hwlock/allwinner,sun6i-a31-hwspinlock.yaml
-+++ b/Documentation/devicetree/bindings/hwlock/allwinner,sun6i-a31-hwspinlock.yaml
-@@ -26,17 +26,22 @@ properties:
- resets:
- maxItems: 1
-
-+ interrupts:
-+ maxItems: 1
-+
- required:
- - compatible
- - reg
- - clocks
- - resets
-+ - interrupts
-
- additionalProperties: false
-
- examples:
- - |
- #include <dt-bindings/clock/sun8i-a23-a33-ccu.h>
-+ #include <dt-bindings/interrupt-controller/arm-gic.h>
- #include <dt-bindings/reset/sun8i-a23-a33-ccu.h>
-
- hwlock@1c18000 {
-@@ -44,5 +49,6 @@ examples:
- reg = <0x01c18000 0x1000>;
- clocks = <&ccu CLK_BUS_SPINLOCK>;
- resets = <&ccu RST_BUS_SPINLOCK>;
-+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
- };
- ...
+++ /dev/null
-From e7b8c42c6bf02f4c2e24b015a12cd9edad094644 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 14 Nov 2021 12:36:52 -0600
-Subject: [PATCH 046/117] dt-bindings: hwlock: sun6i: Add per-SoC compatibles
-
-While all implementations of this hardware appear to be indentical, it
-is possible that some difference exists. To be safe, add a compatible
-for each SoC integration, using the A31 compatible only as a fallback.
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- .../hwlock/allwinner,sun6i-a31-hwspinlock.yaml | 16 +++++++++++++++-
- 1 file changed, 15 insertions(+), 1 deletion(-)
-
---- a/Documentation/devicetree/bindings/hwlock/allwinner,sun6i-a31-hwspinlock.yaml
-+++ b/Documentation/devicetree/bindings/hwlock/allwinner,sun6i-a31-hwspinlock.yaml
-@@ -15,7 +15,21 @@ description:
-
- properties:
- compatible:
-- const: allwinner,sun6i-a31-hwspinlock
-+ oneOf:
-+ - items:
-+ - enum:
-+ - allwinner,sun8i-a23-hwspinlock
-+ - allwinner,sun8i-a33-hwspinlock
-+ - allwinner,sun8i-a50-hwspinlock
-+ - allwinner,sun8i-a83t-hwspinlock
-+ - allwinner,sun8i-h3-hwspinlock
-+ - allwinner,sun9i-a80-hwspinlock
-+ - allwinner,sun20i-d1-hwspinlock
-+ - allwinner,sun50i-a64-hwspinlock
-+ - allwinner,sun50i-h6-hwspinlock
-+ - allwinner,sun50i-r329-hwspinlock
-+ - const: allwinner,sun6i-a31-hwspinlock
-+ - const: allwinner,sun6i-a31-hwspinlock
-
- reg:
- maxItems: 1
+++ /dev/null
-From 419b337ac3e60126f9de0bc98892e54a8ffe3b6e Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 13 Jun 2021 23:50:57 -0500
-Subject: [PATCH 047/117] ASoC: sun4i-i2s: Also set capture DMA width
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- sound/soc/sunxi/sun4i-i2s.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/sound/soc/sunxi/sun4i-i2s.c
-+++ b/sound/soc/sunxi/sun4i-i2s.c
-@@ -633,6 +633,7 @@ static int sun4i_i2s_hw_params(struct sn
- params_physical_width(params));
- return -EINVAL;
- }
-+ i2s->capture_dma_data.addr_width = width;
- i2s->playback_dma_data.addr_width = width;
-
- sr = i2s->variant->get_sr(word_size);
+++ /dev/null
-From dbad9a1f280b3c3e34cc133407ae057293b8aadf Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Wed, 17 Aug 2022 02:34:08 -0500
-Subject: [PATCH 048/117] todo
-
----
- arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
-+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
-@@ -253,6 +253,7 @@
- #sound-dai-cells = <0>;
- };
-
-+ // TODO: how to integrate ASRC? same or separate node?
- i2s2: i2s@2034000 {
- compatible = "allwinner,sun20i-d1-i2s",
- "allwinner,sun50i-r329-i2s";
+++ /dev/null
-From 031deed1d755fc9f1e4908ef70969e1458203421 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 6 Jun 2021 10:20:38 -0500
-Subject: [PATCH 049/117] dt-bindings: iommu: sun50i: Add compatible for
- Allwinner D1
-
-D1 contains an IOMMU similar to the one in the H6 SoC, but the D1
-variant has no external reset signal.
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- .../iommu/allwinner,sun50i-h6-iommu.yaml | 16 ++++++++++++++--
- 1 file changed, 14 insertions(+), 2 deletions(-)
-
---- a/Documentation/devicetree/bindings/iommu/allwinner,sun50i-h6-iommu.yaml
-+++ b/Documentation/devicetree/bindings/iommu/allwinner,sun50i-h6-iommu.yaml
-@@ -17,7 +17,9 @@ properties:
- The content of the cell is the master ID.
-
- compatible:
-- const: allwinner,sun50i-h6-iommu
-+ enum:
-+ - allwinner,sun20i-d1-iommu
-+ - allwinner,sun50i-h6-iommu
-
- reg:
- maxItems: 1
-@@ -37,7 +39,17 @@ required:
- - reg
- - interrupts
- - clocks
-- - resets
-+
-+if:
-+ properties:
-+ compatible:
-+ contains:
-+ enum:
-+ - allwinner,sun50i-h6-iommu
-+
-+then:
-+ required:
-+ - resets
-
- additionalProperties: false
-
+++ /dev/null
-From 15a0487680cf506bb4b9bfee2c41b2c3176d4efa Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Wed, 27 Apr 2022 19:01:57 -0500
-Subject: [PATCH 050/117] iommu/sun50i: Support variants without an external
- reset
-
-The IOMMU in the Allwinner D1 SoC does not have an external reset line.
-
-Only attempt to get the reset on hardware variants which should have one
-according to the binding. And switch from the deprecated function to the
-explicit "exclusive" variant.
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- drivers/iommu/sun50i-iommu.c | 18 ++++++++++++++++--
- 1 file changed, 16 insertions(+), 2 deletions(-)
-
---- a/drivers/iommu/sun50i-iommu.c
-+++ b/drivers/iommu/sun50i-iommu.c
-@@ -95,6 +95,10 @@
-
- #define SPAGE_SIZE 4096
-
-+struct sun50i_iommu_variant {
-+ bool has_reset;
-+};
-+
- struct sun50i_iommu {
- struct iommu_device iommu;
-
-@@ -979,9 +983,14 @@ static irqreturn_t sun50i_iommu_irq(int
-
- static int sun50i_iommu_probe(struct platform_device *pdev)
- {
-+ const struct sun50i_iommu_variant *variant;
- struct sun50i_iommu *iommu;
- int ret, irq;
-
-+ variant = of_device_get_match_data(&pdev->dev);
-+ if (!variant)
-+ return -EINVAL;
-+
- iommu = devm_kzalloc(&pdev->dev, sizeof(*iommu), GFP_KERNEL);
- if (!iommu)
- return -ENOMEM;
-@@ -1021,7 +1030,8 @@ static int sun50i_iommu_probe(struct pla
- goto err_free_group;
- }
-
-- iommu->reset = devm_reset_control_get(&pdev->dev, NULL);
-+ if (variant->has_reset)
-+ iommu->reset = devm_reset_control_get_exclusive(&pdev->dev, NULL);
- if (IS_ERR(iommu->reset)) {
- dev_err(&pdev->dev, "Couldn't get our reset line.\n");
- ret = PTR_ERR(iommu->reset);
-@@ -1059,8 +1069,12 @@ err_free_cache:
- return ret;
- }
-
-+static const struct sun50i_iommu_variant sun50i_h6_iommu = {
-+ .has_reset = true,
-+};
-+
- static const struct of_device_id sun50i_iommu_dt[] = {
-- { .compatible = "allwinner,sun50i-h6-iommu", },
-+ { .compatible = "allwinner,sun50i-h6-iommu", .data = &sun50i_h6_iommu },
- { /* sentinel */ },
- };
- MODULE_DEVICE_TABLE(of, sun50i_iommu_dt);
+++ /dev/null
-From 384e2ca3c049fe36f4e679fc76fcc8dfdc9297f9 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Wed, 27 Apr 2022 19:06:28 -0500
-Subject: [PATCH 051/117] iommu/sun50i: Ensure bypass is disabled
-
-The H6 variant of the hardware disables bypass by default. The D1
-variant of the hardware enables bypass for all masters by default.
-
-Since the driver expects bypass to be disabled, ensure that is the case.
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- drivers/iommu/sun50i-iommu.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/iommu/sun50i-iommu.c
-+++ b/drivers/iommu/sun50i-iommu.c
-@@ -445,6 +445,8 @@ static int sun50i_iommu_enable(struct su
-
- spin_lock_irqsave(&iommu->iommu_lock, flags);
-
-+ iommu_write(iommu, IOMMU_BYPASS_REG, 0);
-+
- iommu_write(iommu, IOMMU_TTB_REG, sun50i_domain->dt_dma);
- iommu_write(iommu, IOMMU_TLB_PREFETCH_REG,
- IOMMU_TLB_PREFETCH_MASTER_ENABLE(0) |
+++ /dev/null
-From 5fdd5231c56d58f16a6cefa2bed4b8f331da2c92 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Wed, 27 Apr 2022 19:20:58 -0500
-Subject: [PATCH 052/117] iommu/sun50i: Add support for the D1 variant
-
-D1 contains an IOMMU similar to the one in the H6 SoC, but the D1
-variant has no external reset signal. It also has some register
-definition changes, but none that affect the current driver.
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- drivers/iommu/sun50i-iommu.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/iommu/sun50i-iommu.c
-+++ b/drivers/iommu/sun50i-iommu.c
-@@ -1071,11 +1071,15 @@ err_free_cache:
- return ret;
- }
-
-+static const struct sun50i_iommu_variant sun20i_d1_iommu = {
-+};
-+
- static const struct sun50i_iommu_variant sun50i_h6_iommu = {
- .has_reset = true,
- };
-
- static const struct of_device_id sun50i_iommu_dt[] = {
-+ { .compatible = "allwinner,sun20i-d1-iommu", .data = &sun20i_d1_iommu },
- { .compatible = "allwinner,sun50i-h6-iommu", .data = &sun50i_h6_iommu },
- { /* sentinel */ },
- };
+++ /dev/null
-From 4c37ac95ee354857c8c662b6b7b4bc50eea23206 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 14 Aug 2022 11:20:37 -0500
-Subject: [PATCH 053/117] riscv: dts: allwinner: d1: Add IOMMU node
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
-+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
-@@ -188,6 +188,14 @@
- status = "disabled";
- };
-
-+ iommu: iommu@2010000 {
-+ compatible = "allwinner,sun20i-d1-iommu";
-+ reg = <0x2010000 0x10000>;
-+ interrupts = <80 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_IOMMU>;
-+ #iommu-cells = <1>;
-+ };
-+
- codec: audio-codec@2030000 {
- compatible = "simple-mfd", "syscon";
- reg = <0x2030000 0x1000>;
-@@ -681,6 +689,7 @@
- <&display_clocks CLK_MIXER0>;
- clock-names = "bus", "mod";
- resets = <&display_clocks RST_MIXER0>;
-+ iommus = <&iommu 2>;
-
- ports {
- #address-cells = <1>;
-@@ -703,6 +712,7 @@
- <&display_clocks CLK_MIXER1>;
- clock-names = "bus", "mod";
- resets = <&display_clocks RST_MIXER1>;
-+ iommus = <&iommu 2>;
-
- ports {
- #address-cells = <1>;
+++ /dev/null
-From 31857adcc9db7244a047a3a3550219f7559d8846 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Wed, 4 Aug 2021 21:36:26 -0500
-Subject: [PATCH 054/117] dt-bindings: leds: Add Allwinner A100 LED controller
-
-The Allwinner A100, R329, and D1 SoCs contain an LED controller designed
-to drive a series of RGB LED pixels. It supports PIO and DMA transfers,
-and has configurable timing and pixel format. All three implementations
-appear to be identical, so use the oldest as the fallback compatible.
-
-Series-changes: 2
- - Fixed typo leading to duplicate t1h-ns property
- - Removed "items" layer in definition of dmas/dma-names
- - Replaced uint32 type reference with maxItems in timing properties
-
-Series-changes: 3
- - Removed quotes from enumeration values
- - Added vendor prefix to timing/format properties
- - Renamed "format" property to "pixel-format" for clarity
- - Dropped "vled-supply" as it is unrelated to the controller hardware
-
-Series-changes: 4
- - Use "default" instead of "maxItems" for timing properties
-
-Series-changes: 5
- - A100 contains the original implementation, so use that as the base
- compatible string, and rename the binding to match
- - Add "unevaluatedProperties: false" to the child multi-led binding
-
-Acked-by: Maxime Ripard <maxime@cerno.tech>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- .../leds/allwinner,sun50i-a100-ledc.yaml | 139 ++++++++++++++++++
- 1 file changed, 139 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/leds/allwinner,sun50i-a100-ledc.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/leds/allwinner,sun50i-a100-ledc.yaml
-@@ -0,0 +1,139 @@
-+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/leds/allwinner,sun50i-a100-ledc.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Allwinner A100 LED Controller Bindings
-+
-+maintainers:
-+ - Samuel Holland <samuel@sholland.org>
-+
-+description:
-+ The LED controller found in Allwinner sunxi SoCs uses a one-wire serial
-+ interface to drive up to 1024 RGB LEDs.
-+
-+properties:
-+ compatible:
-+ oneOf:
-+ - const: allwinner,sun50i-a100-ledc
-+ - items:
-+ - enum:
-+ - allwinner,sun20i-d1-ledc
-+ - allwinner,sun50i-r329-ledc
-+ - const: allwinner,sun50i-a100-ledc
-+
-+ reg:
-+ maxItems: 1
-+
-+ "#address-cells":
-+ const: 1
-+
-+ "#size-cells":
-+ const: 0
-+
-+ interrupts:
-+ maxItems: 1
-+
-+ clocks:
-+ items:
-+ - description: Bus clock
-+ - description: Module clock
-+
-+ clock-names:
-+ items:
-+ - const: bus
-+ - const: mod
-+
-+ resets:
-+ maxItems: 1
-+
-+ dmas:
-+ maxItems: 1
-+ description: TX DMA channel
-+
-+ dma-names:
-+ const: tx
-+
-+ allwinner,pixel-format:
-+ description: Pixel format (subpixel transmission order), default is "grb"
-+ enum:
-+ - bgr
-+ - brg
-+ - gbr
-+ - grb
-+ - rbg
-+ - rgb
-+
-+ allwinner,t0h-ns:
-+ default: 336
-+ description: Length of high pulse when transmitting a "0" bit
-+
-+ allwinner,t0l-ns:
-+ default: 840
-+ description: Length of low pulse when transmitting a "0" bit
-+
-+ allwinner,t1h-ns:
-+ default: 882
-+ description: Length of high pulse when transmitting a "1" bit
-+
-+ allwinner,t1l-ns:
-+ default: 294
-+ description: Length of low pulse when transmitting a "1" bit
-+
-+ allwinner,treset-ns:
-+ default: 300000
-+ description: Minimum delay between transmission frames
-+
-+patternProperties:
-+ "^multi-led@[0-9a-f]+$":
-+ type: object
-+ $ref: leds-class-multicolor.yaml#
-+ unevaluatedProperties: false
-+ properties:
-+ reg:
-+ minimum: 0
-+ maximum: 1023
-+ description: Index of the LED in the series (must be contiguous)
-+
-+ required:
-+ - reg
-+
-+required:
-+ - compatible
-+ - reg
-+ - interrupts
-+ - clocks
-+ - clock-names
-+ - resets
-+ - dmas
-+ - dma-names
-+
-+additionalProperties: false
-+
-+examples:
-+ - |
-+ #include <dt-bindings/interrupt-controller/irq.h>
-+ #include <dt-bindings/leds/common.h>
-+
-+ ledc: led-controller@2008000 {
-+ compatible = "allwinner,sun20i-d1-ledc",
-+ "allwinner,sun50i-a100-ledc";
-+ reg = <0x2008000 0x400>;
-+ interrupts = <36 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu 12>, <&ccu 34>;
-+ clock-names = "bus", "mod";
-+ resets = <&ccu 12>;
-+ dmas = <&dma 42>;
-+ dma-names = "tx";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ multi-led@0 {
-+ reg = <0x0>;
-+ color = <LED_COLOR_ID_RGB>;
-+ function = LED_FUNCTION_INDICATOR;
-+ };
-+ };
-+
-+...
+++ /dev/null
-From 352b296d30df06b880d2c7620910cd759dc2609d Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sat, 26 Jun 2021 11:02:49 -0500
-Subject: [PATCH 055/117] leds: sun50i-a100: New driver for the A100 LED
- controller
-
-Some Allwinner sunxi SoCs, starting with the A100, contain an LED
-controller designed to drive RGB LED pixels. Add a driver for it using
-the multicolor LED framework, and with LEDs defined in the device tree.
-
-Series-changes: 2
- - Renamed from sunxi-ledc to sun50i-r329-ledc
- - Added missing "static" to functions/globals as reported by 0day bot
-
-Series-changes: 3
- - Added vendor prefix to timing/format properties
- - Renamed "format" property to "pixel-format" for clarity
- - Dropped "vled-supply" as it is unrelated to the controller hardware
- - Changed "writesl" to "iowrite32_rep" so the driver builds on hppa
-
-Series-changes: 4
- - Depend on LEDS_CLASS_MULTICOLOR
-
-Series-changes: 5
- - Rename the driver R329 -> A100, since that is the actual original
- implementation
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- drivers/leds/Kconfig | 9 +
- drivers/leds/Makefile | 1 +
- drivers/leds/leds-sun50i-a100.c | 554 ++++++++++++++++++++++++++++++++
- 3 files changed, 564 insertions(+)
- create mode 100644 drivers/leds/leds-sun50i-a100.c
-
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -283,6 +283,15 @@ config LEDS_COBALT_RAQ
- help
- This option enables support for the Cobalt Raq series LEDs.
-
-+config LEDS_SUN50I_A100
-+ tristate "LED support for Allwinner A100 RGB LED controller"
-+ depends on LEDS_CLASS_MULTICOLOR && OF
-+ depends on ARCH_SUNXI || COMPILE_TEST
-+ help
-+ This option enables support for the RGB LED controller found
-+ in some Allwinner sunxi SoCs, includeing A100, R329, and D1.
-+ It uses a one-wire interface to control up to 1024 LEDs.
-+
- config LEDS_SUNFIRE
- tristate "LED support for SunFire servers."
- depends on LEDS_CLASS
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -76,6 +76,7 @@ obj-$(CONFIG_LEDS_PWM) += leds-pwm.o
- obj-$(CONFIG_LEDS_REGULATOR) += leds-regulator.o
- obj-$(CONFIG_LEDS_S3C24XX) += leds-s3c24xx.o
- obj-$(CONFIG_LEDS_SC27XX_BLTC) += leds-sc27xx-bltc.o
-+obj-$(CONFIG_LEDS_SUN50I_A100) += leds-sun50i-a100.o
- obj-$(CONFIG_LEDS_SUNFIRE) += leds-sunfire.o
- obj-$(CONFIG_LEDS_SYSCON) += leds-syscon.o
- obj-$(CONFIG_LEDS_TCA6507) += leds-tca6507.o
---- /dev/null
-+++ b/drivers/leds/leds-sun50i-a100.c
-@@ -0,0 +1,554 @@
-+// SPDX-License-Identifier: GPL-2.0
-+//
-+// Copyright (c) 2021-2022 Samuel Holland <samuel@sholland.org>
-+//
-+// Partly based on drivers/leds/leds-turris-omnia.c, which is:
-+// Copyright (c) 2020 by Marek Behún <kabel@kernel.org>
-+//
-+
-+#include <linux/clk.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/dmaengine.h>
-+#include <linux/interrupt.h>
-+#include <linux/io.h>
-+#include <linux/led-class-multicolor.h>
-+#include <linux/leds.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+#include <linux/pm.h>
-+#include <linux/reset.h>
-+#include <linux/spinlock.h>
-+
-+#define LEDC_CTRL_REG 0x0000
-+#define LEDC_CTRL_REG_DATA_LENGTH (0x1fff << 16)
-+#define LEDC_CTRL_REG_RGB_MODE (0x7 << 6)
-+#define LEDC_CTRL_REG_LEDC_EN BIT(0)
-+#define LEDC_T01_TIMING_CTRL_REG 0x0004
-+#define LEDC_T01_TIMING_CTRL_REG_T1H (0x3f << 21)
-+#define LEDC_T01_TIMING_CTRL_REG_T1L (0x1f << 16)
-+#define LEDC_T01_TIMING_CTRL_REG_T0H (0x1f << 6)
-+#define LEDC_T01_TIMING_CTRL_REG_T0L (0x3f << 0)
-+#define LEDC_RESET_TIMING_CTRL_REG 0x000c
-+#define LEDC_RESET_TIMING_CTRL_REG_LED_NUM (0x3ff << 0)
-+#define LEDC_DATA_REG 0x0014
-+#define LEDC_DMA_CTRL_REG 0x0018
-+#define LEDC_DMA_CTRL_REG_FIFO_TRIG_LEVEL (0x1f << 0)
-+#define LEDC_INT_CTRL_REG 0x001c
-+#define LEDC_INT_CTRL_REG_GLOBAL_INT_EN BIT(5)
-+#define LEDC_INT_CTRL_REG_FIFO_CPUREQ_INT_EN BIT(1)
-+#define LEDC_INT_CTRL_REG_TRANS_FINISH_INT_EN BIT(0)
-+#define LEDC_INT_STS_REG 0x0020
-+#define LEDC_INT_STS_REG_FIFO_CPUREQ_INT BIT(1)
-+#define LEDC_INT_STS_REG_TRANS_FINISH_INT BIT(0)
-+
-+#define LEDC_FIFO_DEPTH 32
-+#define LEDC_MAX_LEDS 1024
-+
-+#define LEDS_TO_BYTES(n) ((n) * sizeof(u32))
-+
-+struct sun50i_a100_ledc_led {
-+ struct led_classdev_mc mc_cdev;
-+ struct mc_subled subled_info[3];
-+};
-+
-+#define to_ledc_led(mc) container_of(mc, struct sun50i_a100_ledc_led, mc_cdev)
-+
-+struct sun50i_a100_ledc_timing {
-+ u32 t0h_ns;
-+ u32 t0l_ns;
-+ u32 t1h_ns;
-+ u32 t1l_ns;
-+ u32 treset_ns;
-+};
-+
-+struct sun50i_a100_ledc {
-+ struct device *dev;
-+ void __iomem *base;
-+ struct clk *bus_clk;
-+ struct clk *mod_clk;
-+ struct reset_control *reset;
-+
-+ u32 *buffer;
-+ struct dma_chan *dma_chan;
-+ dma_addr_t dma_handle;
-+ int pio_length;
-+ int pio_offset;
-+
-+ spinlock_t lock;
-+ int next_length;
-+ bool xfer_active;
-+
-+ u32 format;
-+ struct sun50i_a100_ledc_timing timing;
-+
-+ int num_leds;
-+ struct sun50i_a100_ledc_led leds[];
-+};
-+
-+static int sun50i_a100_ledc_dma_xfer(struct sun50i_a100_ledc *priv, int length)
-+{
-+ struct dma_async_tx_descriptor *desc;
-+ dma_cookie_t cookie;
-+
-+ desc = dmaengine_prep_slave_single(priv->dma_chan, priv->dma_handle,
-+ LEDS_TO_BYTES(length),
-+ DMA_MEM_TO_DEV, 0);
-+ if (!desc)
-+ return -ENOMEM;
-+
-+ cookie = dmaengine_submit(desc);
-+ if (dma_submit_error(cookie))
-+ return -EIO;
-+
-+ dma_async_issue_pending(priv->dma_chan);
-+
-+ return 0;
-+}
-+
-+static void sun50i_a100_ledc_pio_xfer(struct sun50i_a100_ledc *priv, int length)
-+{
-+ u32 burst, offset, val;
-+
-+ if (length) {
-+ /* New transfer (FIFO is empty). */
-+ offset = 0;
-+ burst = min(length, LEDC_FIFO_DEPTH);
-+ } else {
-+ /* Existing transfer (FIFO is half-full). */
-+ length = priv->pio_length;
-+ offset = priv->pio_offset;
-+ burst = min(length, LEDC_FIFO_DEPTH / 2);
-+ }
-+
-+ iowrite32_rep(priv->base + LEDC_DATA_REG, priv->buffer + offset, burst);
-+
-+ if (burst < length) {
-+ priv->pio_length = length - burst;
-+ priv->pio_offset = offset + burst;
-+
-+ if (!offset) {
-+ val = readl(priv->base + LEDC_INT_CTRL_REG);
-+ val |= LEDC_INT_CTRL_REG_FIFO_CPUREQ_INT_EN;
-+ writel(val, priv->base + LEDC_INT_CTRL_REG);
-+ }
-+ } else {
-+ /* Disable the request IRQ once all data is written. */
-+ val = readl(priv->base + LEDC_INT_CTRL_REG);
-+ val &= ~LEDC_INT_CTRL_REG_FIFO_CPUREQ_INT_EN;
-+ writel(val, priv->base + LEDC_INT_CTRL_REG);
-+ }
-+}
-+
-+static void sun50i_a100_ledc_start_xfer(struct sun50i_a100_ledc *priv,
-+ int length)
-+{
-+ u32 val;
-+
-+ dev_dbg(priv->dev, "Updating %d LEDs\n", length);
-+
-+ val = readl(priv->base + LEDC_CTRL_REG);
-+ val &= ~LEDC_CTRL_REG_DATA_LENGTH;
-+ val |= length << 16 | LEDC_CTRL_REG_LEDC_EN;
-+ writel(val, priv->base + LEDC_CTRL_REG);
-+
-+ if (length > LEDC_FIFO_DEPTH) {
-+ int ret = sun50i_a100_ledc_dma_xfer(priv, length);
-+
-+ if (!ret)
-+ return;
-+
-+ dev_warn(priv->dev, "Failed to set up DMA: %d\n", ret);
-+ }
-+
-+ sun50i_a100_ledc_pio_xfer(priv, length);
-+}
-+
-+static irqreturn_t sun50i_a100_ledc_irq(int irq, void *dev_id)
-+{
-+ struct sun50i_a100_ledc *priv = dev_id;
-+ u32 val;
-+
-+ val = readl(priv->base + LEDC_INT_STS_REG);
-+
-+ if (val & LEDC_INT_STS_REG_TRANS_FINISH_INT) {
-+ int next_length;
-+
-+ /* Start the next transfer if needed. */
-+ spin_lock(&priv->lock);
-+ next_length = priv->next_length;
-+ if (next_length)
-+ priv->next_length = 0;
-+ else
-+ priv->xfer_active = false;
-+ spin_unlock(&priv->lock);
-+
-+ if (next_length)
-+ sun50i_a100_ledc_start_xfer(priv, next_length);
-+ } else if (val & LEDC_INT_STS_REG_FIFO_CPUREQ_INT) {
-+ /* Continue the current transfer. */
-+ sun50i_a100_ledc_pio_xfer(priv, 0);
-+ }
-+
-+ writel(val, priv->base + LEDC_INT_STS_REG);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static void sun50i_a100_ledc_brightness_set(struct led_classdev *cdev,
-+ enum led_brightness brightness)
-+{
-+ struct sun50i_a100_ledc *priv = dev_get_drvdata(cdev->dev->parent);
-+ struct led_classdev_mc *mc_cdev = lcdev_to_mccdev(cdev);
-+ struct sun50i_a100_ledc_led *led = to_ledc_led(mc_cdev);
-+ int addr = led - priv->leds;
-+ unsigned long flags;
-+ bool xfer_active;
-+ int next_length;
-+
-+ led_mc_calc_color_components(mc_cdev, brightness);
-+
-+ priv->buffer[addr] = led->subled_info[0].brightness << 16 |
-+ led->subled_info[1].brightness << 8 |
-+ led->subled_info[2].brightness;
-+
-+ dev_dbg(priv->dev, "LED %d -> #%06x\n", addr, priv->buffer[addr]);
-+
-+ spin_lock_irqsave(&priv->lock, flags);
-+ next_length = max(priv->next_length, addr + 1);
-+ xfer_active = priv->xfer_active;
-+ if (xfer_active)
-+ priv->next_length = next_length;
-+ else
-+ priv->xfer_active = true;
-+ spin_unlock_irqrestore(&priv->lock, flags);
-+
-+ if (!xfer_active)
-+ sun50i_a100_ledc_start_xfer(priv, next_length);
-+}
-+
-+static const char *const sun50i_a100_ledc_formats[] = {
-+ "rgb",
-+ "rbg",
-+ "grb",
-+ "gbr",
-+ "brg",
-+ "bgr",
-+};
-+
-+static int sun50i_a100_ledc_parse_format(const struct device_node *np,
-+ struct sun50i_a100_ledc *priv)
-+{
-+ const char *format = "grb";
-+ u32 i;
-+
-+ of_property_read_string(np, "allwinner,pixel-format", &format);
-+
-+ for (i = 0; i < ARRAY_SIZE(sun50i_a100_ledc_formats); ++i) {
-+ if (!strcmp(format, sun50i_a100_ledc_formats[i])) {
-+ priv->format = i;
-+ return 0;
-+ }
-+ }
-+
-+ dev_err(priv->dev, "Bad pixel format '%s'\n", format);
-+
-+ return -EINVAL;
-+}
-+
-+static void sun50i_a100_ledc_set_format(struct sun50i_a100_ledc *priv)
-+{
-+ u32 val;
-+
-+ val = readl(priv->base + LEDC_CTRL_REG);
-+ val &= ~LEDC_CTRL_REG_RGB_MODE;
-+ val |= priv->format << 6;
-+ writel(val, priv->base + LEDC_CTRL_REG);
-+}
-+
-+static const struct sun50i_a100_ledc_timing sun50i_a100_ledc_default_timing = {
-+ .t0h_ns = 336,
-+ .t0l_ns = 840,
-+ .t1h_ns = 882,
-+ .t1l_ns = 294,
-+ .treset_ns = 300000,
-+};
-+
-+static int sun50i_a100_ledc_parse_timing(const struct device_node *np,
-+ struct sun50i_a100_ledc *priv)
-+{
-+ struct sun50i_a100_ledc_timing *timing = &priv->timing;
-+
-+ *timing = sun50i_a100_ledc_default_timing;
-+
-+ of_property_read_u32(np, "allwinner,t0h-ns", &timing->t0h_ns);
-+ of_property_read_u32(np, "allwinner,t0l-ns", &timing->t0l_ns);
-+ of_property_read_u32(np, "allwinner,t1h-ns", &timing->t1h_ns);
-+ of_property_read_u32(np, "allwinner,t1l-ns", &timing->t1l_ns);
-+ of_property_read_u32(np, "allwinner,treset-ns", &timing->treset_ns);
-+
-+ return 0;
-+}
-+
-+static void sun50i_a100_ledc_set_timing(struct sun50i_a100_ledc *priv)
-+{
-+ const struct sun50i_a100_ledc_timing *timing = &priv->timing;
-+ unsigned long mod_freq = clk_get_rate(priv->mod_clk);
-+ u32 cycle_ns = NSEC_PER_SEC / mod_freq;
-+ u32 val;
-+
-+ val = (timing->t1h_ns / cycle_ns) << 21 |
-+ (timing->t1l_ns / cycle_ns) << 16 |
-+ (timing->t0h_ns / cycle_ns) << 6 |
-+ (timing->t0l_ns / cycle_ns);
-+ writel(val, priv->base + LEDC_T01_TIMING_CTRL_REG);
-+
-+ val = (timing->treset_ns / cycle_ns) << 16 |
-+ (priv->num_leds - 1);
-+ writel(val, priv->base + LEDC_RESET_TIMING_CTRL_REG);
-+}
-+
-+static int sun50i_a100_ledc_resume(struct device *dev)
-+{
-+ struct sun50i_a100_ledc *priv = dev_get_drvdata(dev);
-+ u32 val;
-+ int ret;
-+
-+ ret = reset_control_deassert(priv->reset);
-+ if (ret)
-+ return ret;
-+
-+ ret = clk_prepare_enable(priv->bus_clk);
-+ if (ret)
-+ goto err_assert_reset;
-+
-+ ret = clk_prepare_enable(priv->mod_clk);
-+ if (ret)
-+ goto err_disable_bus_clk;
-+
-+ sun50i_a100_ledc_set_format(priv);
-+ sun50i_a100_ledc_set_timing(priv);
-+
-+ /* The trigger level must be at least the burst length. */
-+ val = readl(priv->base + LEDC_DMA_CTRL_REG);
-+ val &= ~LEDC_DMA_CTRL_REG_FIFO_TRIG_LEVEL;
-+ val |= LEDC_FIFO_DEPTH / 2;
-+ writel(val, priv->base + LEDC_DMA_CTRL_REG);
-+
-+ val = LEDC_INT_CTRL_REG_GLOBAL_INT_EN |
-+ LEDC_INT_CTRL_REG_TRANS_FINISH_INT_EN;
-+ writel(val, priv->base + LEDC_INT_CTRL_REG);
-+
-+ return 0;
-+
-+err_disable_bus_clk:
-+ clk_disable_unprepare(priv->bus_clk);
-+err_assert_reset:
-+ reset_control_assert(priv->reset);
-+
-+ return ret;
-+}
-+
-+static int sun50i_a100_ledc_suspend(struct device *dev)
-+{
-+ struct sun50i_a100_ledc *priv = dev_get_drvdata(dev);
-+
-+ clk_disable_unprepare(priv->mod_clk);
-+ clk_disable_unprepare(priv->bus_clk);
-+ reset_control_assert(priv->reset);
-+
-+ return 0;
-+}
-+
-+static void sun50i_a100_ledc_dma_cleanup(void *data)
-+{
-+ struct sun50i_a100_ledc *priv = data;
-+ struct device *dma_dev = dmaengine_get_dma_device(priv->dma_chan);
-+
-+ if (priv->buffer)
-+ dma_free_wc(dma_dev, LEDS_TO_BYTES(priv->num_leds),
-+ priv->buffer, priv->dma_handle);
-+ dma_release_channel(priv->dma_chan);
-+}
-+
-+static int sun50i_a100_ledc_probe(struct platform_device *pdev)
-+{
-+ const struct device_node *np = pdev->dev.of_node;
-+ struct dma_slave_config dma_cfg = {};
-+ struct led_init_data init_data = {};
-+ struct device *dev = &pdev->dev;
-+ struct device_node *child;
-+ struct sun50i_a100_ledc *priv;
-+ struct resource *mem;
-+ int count, irq, ret;
-+
-+ count = of_get_available_child_count(np);
-+ if (!count)
-+ return -ENODEV;
-+ if (count > LEDC_MAX_LEDS) {
-+ dev_err(dev, "Too many LEDs! (max is %d)\n", LEDC_MAX_LEDS);
-+ return -EINVAL;
-+ }
-+
-+ priv = devm_kzalloc(dev, struct_size(priv, leds, count), GFP_KERNEL);
-+ if (!priv)
-+ return -ENOMEM;
-+
-+ priv->dev = dev;
-+ priv->num_leds = count;
-+ spin_lock_init(&priv->lock);
-+ dev_set_drvdata(dev, priv);
-+
-+ ret = sun50i_a100_ledc_parse_format(np, priv);
-+ if (ret)
-+ return ret;
-+
-+ ret = sun50i_a100_ledc_parse_timing(np, priv);
-+ if (ret)
-+ return ret;
-+
-+ priv->base = devm_platform_get_and_ioremap_resource(pdev, 0, &mem);
-+ if (IS_ERR(priv->base))
-+ return PTR_ERR(priv->base);
-+
-+ priv->bus_clk = devm_clk_get(dev, "bus");
-+ if (IS_ERR(priv->bus_clk))
-+ return PTR_ERR(priv->bus_clk);
-+
-+ priv->mod_clk = devm_clk_get(dev, "mod");
-+ if (IS_ERR(priv->mod_clk))
-+ return PTR_ERR(priv->mod_clk);
-+
-+ priv->reset = devm_reset_control_get_exclusive(dev, NULL);
-+ if (IS_ERR(priv->reset))
-+ return PTR_ERR(priv->reset);
-+
-+ priv->dma_chan = dma_request_chan(dev, "tx");
-+ if (IS_ERR(priv->dma_chan))
-+ return PTR_ERR(priv->dma_chan);
-+
-+ ret = devm_add_action_or_reset(dev, sun50i_a100_ledc_dma_cleanup, priv);
-+ if (ret)
-+ return ret;
-+
-+ dma_cfg.dst_addr = mem->start + LEDC_DATA_REG;
-+ dma_cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
-+ dma_cfg.dst_maxburst = LEDC_FIFO_DEPTH / 2;
-+ ret = dmaengine_slave_config(priv->dma_chan, &dma_cfg);
-+ if (ret)
-+ return ret;
-+
-+ priv->buffer = dma_alloc_wc(dmaengine_get_dma_device(priv->dma_chan),
-+ LEDS_TO_BYTES(priv->num_leds),
-+ &priv->dma_handle, GFP_KERNEL);
-+ if (!priv->buffer)
-+ return -ENOMEM;
-+
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0)
-+ return irq;
-+
-+ ret = devm_request_irq(dev, irq, sun50i_a100_ledc_irq,
-+ 0, dev_name(dev), priv);
-+ if (ret)
-+ return ret;
-+
-+ ret = sun50i_a100_ledc_resume(dev);
-+ if (ret)
-+ return ret;
-+
-+ for_each_available_child_of_node(np, child) {
-+ struct sun50i_a100_ledc_led *led;
-+ struct led_classdev *cdev;
-+ u32 addr, color;
-+
-+ ret = of_property_read_u32(child, "reg", &addr);
-+ if (ret || addr >= count) {
-+ dev_err(dev, "LED 'reg' values must be from 0 to %d\n",
-+ priv->num_leds - 1);
-+ ret = -EINVAL;
-+ goto err_put_child;
-+ }
-+
-+ ret = of_property_read_u32(child, "color", &color);
-+ if (ret || color != LED_COLOR_ID_RGB) {
-+ dev_err(dev, "LED 'color' must be LED_COLOR_ID_RGB\n");
-+ ret = -EINVAL;
-+ goto err_put_child;
-+ }
-+
-+ led = &priv->leds[addr];
-+
-+ led->subled_info[0].color_index = LED_COLOR_ID_RED;
-+ led->subled_info[0].channel = 0;
-+ led->subled_info[1].color_index = LED_COLOR_ID_GREEN;
-+ led->subled_info[1].channel = 1;
-+ led->subled_info[2].color_index = LED_COLOR_ID_BLUE;
-+ led->subled_info[2].channel = 2;
-+
-+ led->mc_cdev.num_colors = ARRAY_SIZE(led->subled_info);
-+ led->mc_cdev.subled_info = led->subled_info;
-+
-+ cdev = &led->mc_cdev.led_cdev;
-+ cdev->max_brightness = U8_MAX;
-+ cdev->brightness_set = sun50i_a100_ledc_brightness_set;
-+
-+ init_data.fwnode = of_fwnode_handle(child);
-+
-+ ret = devm_led_classdev_multicolor_register_ext(dev,
-+ &led->mc_cdev,
-+ &init_data);
-+ if (ret) {
-+ dev_err(dev, "Failed to register LED %u: %d\n",
-+ addr, ret);
-+ goto err_put_child;
-+ }
-+ }
-+
-+ dev_info(dev, "Registered %d LEDs\n", priv->num_leds);
-+
-+ return 0;
-+
-+err_put_child:
-+ of_node_put(child);
-+ sun50i_a100_ledc_suspend(&pdev->dev);
-+
-+ return ret;
-+}
-+
-+static int sun50i_a100_ledc_remove(struct platform_device *pdev)
-+{
-+ sun50i_a100_ledc_suspend(&pdev->dev);
-+
-+ return 0;
-+}
-+
-+static void sun50i_a100_ledc_shutdown(struct platform_device *pdev)
-+{
-+ sun50i_a100_ledc_suspend(&pdev->dev);
-+}
-+
-+static const struct of_device_id sun50i_a100_ledc_of_match[] = {
-+ { .compatible = "allwinner,sun50i-a100-ledc" },
-+ {}
-+};
-+MODULE_DEVICE_TABLE(of, sun50i_a100_ledc_of_match);
-+
-+static SIMPLE_DEV_PM_OPS(sun50i_a100_ledc_pm,
-+ sun50i_a100_ledc_suspend, sun50i_a100_ledc_resume);
-+
-+static struct platform_driver sun50i_a100_ledc_driver = {
-+ .probe = sun50i_a100_ledc_probe,
-+ .remove = sun50i_a100_ledc_remove,
-+ .shutdown = sun50i_a100_ledc_shutdown,
-+ .driver = {
-+ .name = "sun50i-a100-ledc",
-+ .of_match_table = sun50i_a100_ledc_of_match,
-+ .pm = pm_ptr(&sun50i_a100_ledc_pm),
-+ },
-+};
-+module_platform_driver(sun50i_a100_ledc_driver);
-+
-+MODULE_AUTHOR("Samuel Holland <samuel@sholland.org>");
-+MODULE_DESCRIPTION("Allwinner A100 LED controller driver");
-+MODULE_LICENSE("GPL");
+++ /dev/null
-From 0040f071ab45d3098b2aad7e28e07593a5740782 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Thu, 25 Aug 2022 23:19:40 -0500
-Subject: [PATCH 056/117] arm64: dts: allwinner: a100: Add LED controller node
-
-Allwinner A100 contains an LED controller. Add it to the devicetree.
-
-Commit-changes: 5
- - New patch for v5
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi | 14 ++++++++++++++
- 1 file changed, 14 insertions(+)
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
-@@ -273,6 +273,20 @@
- #size-cells = <0>;
- };
-
-+ ledc: led-controller@5018000 {
-+ compatible = "allwinner,sun50i-a100-ledc";
-+ reg = <0x5018000 0x400>;
-+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_LEDC>, <&ccu CLK_LEDC>;
-+ clock-names = "bus", "mod";
-+ resets = <&ccu RST_BUS_LEDC>;
-+ dmas = <&dma 42>;
-+ dma-names = "tx";
-+ status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+
- ths: thermal-sensor@5070400 {
- compatible = "allwinner,sun50i-a100-ths";
- reg = <0x05070400 0x100>;
+++ /dev/null
-From 595f76548e1d51a76b1ab201293ef441233921cf Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Thu, 11 Aug 2022 23:02:43 -0500
-Subject: [PATCH 057/117] riscv: dts: allwinner: d1: Add LED controller node
-
-Allwinner D1 contains an LED controller. Add its devicetree node, as
-well as the pinmux used by the reference board design.
-
-Commit-changes: 5
- - New patch for v5
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi | 21 ++++++++++++++++++++
- 1 file changed, 21 insertions(+)
-
---- a/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
-+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
-@@ -116,6 +116,12 @@
- };
-
- /omit-if-no-ref/
-+ ledc_pc0_pin: ledc-pc0-pin {
-+ pins = "PC0";
-+ function = "ledc";
-+ };
-+
-+ /omit-if-no-ref/
- mmc0_pins: mmc0-pins {
- pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5";
- function = "mmc0";
-@@ -178,6 +184,21 @@
- #reset-cells = <1>;
- };
-
-+ ledc: led-controller@2008000 {
-+ compatible = "allwinner,sun20i-d1-ledc",
-+ "allwinner,sun50i-a100-ledc";
-+ reg = <0x2008000 0x400>;
-+ interrupts = <36 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_LEDC>, <&ccu CLK_LEDC>;
-+ clock-names = "bus", "mod";
-+ resets = <&ccu RST_BUS_LEDC>;
-+ dmas = <&dma 42>;
-+ dma-names = "tx";
-+ status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+
- lradc: keys@2009800 {
- compatible = "allwinner,sun20i-d1-lradc",
- "allwinner,sun50i-r329-lradc";
+++ /dev/null
-From e6eb041b2099ec3d07a4ec391a06e86d7697c9d1 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Thu, 11 Aug 2022 23:03:01 -0500
-Subject: [PATCH 058/117] riscv: dts: allwinner: d1: Add RGB LEDs to boards
-
-Some D1-based boards feature an onboard RGB LED. Enable them.
-
-Commit-changes: 5
- - New patch for v5
-
-Series-version: 5
-
-Series-to: Pavel Machek <pavel@ucw.cz>
-Series-to: Chen-Yu Tsai <wens@csie.org>
-Series-to: Jernej Skrabec <jernej.skrabec@gmail.com>
-Series-to: linux-leds@vger.kernel.org
-Series-cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
-Series-cc: Rob Herring <robh+dt@kernel.org>
-Series-cc: devicetree@vger.kernel.org
-Series-cc: linux-arm-kernel@lists.infradead.org
-Series-cc: linux-kernel@vger.kernel.org
-Series-cc: linux-riscv@lists.infradead.org
-Series-cc: linux-sunxi@lists.linux.dev
-
-Cover-letter:
-leds: Allwinner A100 LED controller support
-This series adds bindings and a driver for the RGB LED controller found
-in some Allwinner SoCs, starting with A100. The hardware in the R329 and
-D1 SoCs appears to be identical.
-
-Patch 3 is included because the LED controller binding requires the DMA
-properties. That patch was sent previously[1], but never got merged.
-
-Patches 5-6 depend on the D1 devicetree series[2], but the rest of this
-series can be merged without them.
-
-This driver was tested on the D1 Nezha board.
-
-[1]: https://lore.kernel.org/linux-arm-kernel/20201110040553.1381-7-frank@allwinnertech.com/
-[2]: https://lore.kernel.org/linux-riscv/20220815050815.22340-1-samuel@sholland.org/
-END
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- .../boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dts | 12 ++++++++++++
- arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts | 13 +++++++++++++
- 2 files changed, 25 insertions(+)
-
---- a/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dts
-+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dts
-@@ -58,6 +58,18 @@
- status = "okay";
- };
-
-+&ledc {
-+ pinctrl-0 = <&ledc_pc0_pin>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+
-+ multi-led@0 {
-+ reg = <0x0>;
-+ color = <LED_COLOR_ID_RGB>;
-+ function = LED_FUNCTION_STATUS;
-+ };
-+};
-+
- &lradc {
- status = "okay";
-
---- a/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
-+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
-@@ -5,6 +5,7 @@
-
- #include <dt-bindings/gpio/gpio.h>
- #include <dt-bindings/input/input.h>
-+#include <dt-bindings/leds/common.h>
-
- #include "sun20i-d1.dtsi"
- #include "sun20i-d1-common-regulators.dtsi"
-@@ -90,6 +91,18 @@
- };
- };
-
-+&ledc {
-+ pinctrl-0 = <&ledc_pc0_pin>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+
-+ multi-led@0 {
-+ reg = <0x0>;
-+ color = <LED_COLOR_ID_RGB>;
-+ function = LED_FUNCTION_STATUS;
-+ };
-+};
-+
- &lradc {
- status = "okay";
-
+++ /dev/null
-From effa2ef8717b0390e8fb0648e16df1b43610af53 Mon Sep 17 00:00:00 2001
-From: Ban Tao <fengzheng923@gmail.com>
-Date: Tue, 2 Mar 2021 20:40:23 +0800
-Subject: [PATCH 059/117] pwm: sun8i-v536: document device tree bindings
-
-This adds binding documentation for sun8i-v536 SoC PWM driver.
-
-Signed-off-by: Ban Tao <fengzheng923@gmail.com>
----
- .../bindings/pwm/pwm-sun8i-v536.txt | 24 +++++++++++++++++++
- 1 file changed, 24 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pwm/pwm-sun8i-v536.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pwm/pwm-sun8i-v536.txt
-@@ -0,0 +1,24 @@
-+Allwinner sun8i-v536 SoC PWM controller
-+
-+Required properties:
-+ - compatible: should be "allwinner,<name>-pwm"
-+ "allwinner,sun8i-v833-pwm"
-+ "allwinner,sun8i-v536-pwm"
-+ "allwinner,sun50i-r818-pwm"
-+ "allwinner,sun50i-a133-pwm"
-+ "allwinner,sun50i-r329-pwm"
-+ - reg: physical base address and length of the controller's registers
-+ - #pwm-cells: should be 3. See pwm.txt in this directory for a description of
-+ the cells format.
-+ - clocks: From common clock binding, handle to the parent clock.
-+ - resets: From reset clock binding, handle to the parent clock.
-+
-+Example:
-+
-+ pwm: pwm@300a0000 {
-+ compatible = "allwinner,sun50i-r818-pwm";
-+ reg = <0x0300a000 0x3ff>;
-+ clocks = <&ccu CLK_BUS_PWM>;
-+ resets = <&ccu RST_BUS_PWM>;
-+ #pwm-cells = <3>;
-+ };
+++ /dev/null
-From 4919e67557eaebb9f155950e7cac547a507b59e5 Mon Sep 17 00:00:00 2001
-From: Ban Tao <fengzheng923@gmail.com>
-Date: Tue, 2 Mar 2021 20:37:37 +0800
-Subject: [PATCH 060/117] pwm: sunxi: Add Allwinner SoC PWM controller driver
-
-The Allwinner R818, A133, R329, V536 and V833 has a new PWM controller
-IP compared to the older Allwinner SoCs.
-
-Signed-off-by: Ban Tao <fengzheng923@gmail.com>
----
- MAINTAINERS | 6 +
- drivers/pwm/Kconfig | 11 +
- drivers/pwm/Makefile | 1 +
- drivers/pwm/pwm-sun8i-v536.c | 401 +++++++++++++++++++++++++++++++++++
- 4 files changed, 419 insertions(+)
- create mode 100644 drivers/pwm/pwm-sun8i-v536.c
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -802,6 +802,12 @@ S: Maintained
- F: Documentation/devicetree/bindings/hwlock/allwinner,sun6i-a31-hwspinlock.yaml
- F: drivers/hwspinlock/sun6i_hwspinlock.c
-
-+ALLWINNER PWM DRIVER
-+M: Ban Tao <fengzheng923@gmail.com>
-+L: linux-pwm@vger.kernel.org
-+S: Maintained
-+F: drivers/pwm/pwm-sun8i-v536.c
-+
- ALLWINNER THERMAL DRIVER
- M: Vasily Khoruzhick <anarsoul@gmail.com>
- M: Yangtao Li <tiny.windzz@gmail.com>
---- a/drivers/pwm/Kconfig
-+++ b/drivers/pwm/Kconfig
-@@ -582,6 +582,17 @@ config PWM_SUN4I
- To compile this driver as a module, choose M here: the module
- will be called pwm-sun4i.
-
-+config PWM_SUN8I_V536
-+ tristate "Allwinner SUN8I_V536 PWM support"
-+ depends on ARCH_SUNXI || COMPILE_TEST
-+ depends on HAS_IOMEM && COMMON_CLK
-+ help
-+ Enhanced PWM framework driver for Allwinner R818, A133, R329,
-+ V536 and V833 SoCs.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called pwm-sun8i-v536.
-+
- config PWM_SUNPLUS
- tristate "Sunplus PWM support"
- depends on ARCH_SUNPLUS || COMPILE_TEST
---- a/drivers/pwm/Makefile
-+++ b/drivers/pwm/Makefile
-@@ -54,6 +54,7 @@ obj-$(CONFIG_PWM_STM32) += pwm-stm32.o
- obj-$(CONFIG_PWM_STM32_LP) += pwm-stm32-lp.o
- obj-$(CONFIG_PWM_STMPE) += pwm-stmpe.o
- obj-$(CONFIG_PWM_SUN4I) += pwm-sun4i.o
-+obj-$(CONFIG_PWM_SUN8I_V536) += pwm-sun8i-v536.o
- obj-$(CONFIG_PWM_SUNPLUS) += pwm-sunplus.o
- obj-$(CONFIG_PWM_TEGRA) += pwm-tegra.o
- obj-$(CONFIG_PWM_TIECAP) += pwm-tiecap.o
---- /dev/null
-+++ b/drivers/pwm/pwm-sun8i-v536.c
-@@ -0,0 +1,401 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ * Driver for Allwinner sun8i-v536 Pulse Width Modulation Controller
-+ *
-+ * Copyright (C) 2021 Ban Tao <fengzheng923@gmail.com>
-+ *
-+ *
-+ * Limitations:
-+ * - When PWM is disabled, the output is driven to inactive.
-+ * - If the register is reconfigured while PWM is running,
-+ * it does not complete the currently running period.
-+ * - If the user input duty is beyond acceptible limits,
-+ * -EINVAL is returned.
-+ */
-+
-+#include <linux/err.h>
-+#include <linux/io.h>
-+#include <linux/module.h>
-+#include <linux/of_device.h>
-+#include <linux/pwm.h>
-+#include <linux/clk.h>
-+#include <linux/reset.h>
-+
-+#define PWM_GET_CLK_OFFSET(chan) (0x20 + ((chan >> 1) * 0x4))
-+#define PWM_CLK_APB_SCR BIT(7)
-+#define PWM_DIV_M 0
-+#define PWM_DIV_M_MASK GENMASK(3, PWM_DIV_M)
-+
-+#define PWM_CLK_REG 0x40
-+#define PWM_CLK_GATING BIT(0)
-+
-+#define PWM_ENABLE_REG 0x80
-+#define PWM_EN BIT(0)
-+
-+#define PWM_CTL_REG(chan) (0x100 + 0x20 * chan)
-+#define PWM_ACT_STA BIT(8)
-+#define PWM_PRESCAL_K 0
-+#define PWM_PRESCAL_K_MASK GENMASK(7, PWM_PRESCAL_K)
-+
-+#define PWM_PERIOD_REG(chan) (0x104 + 0x20 * chan)
-+#define PWM_ENTIRE_CYCLE 16
-+#define PWM_ENTIRE_CYCLE_MASK GENMASK(31, PWM_ENTIRE_CYCLE)
-+#define PWM_ACT_CYCLE 0
-+#define PWM_ACT_CYCLE_MASK GENMASK(15, PWM_ACT_CYCLE)
-+
-+#define BIT_CH(bit, chan) ((bit) << (chan))
-+#define SET_BITS(shift, mask, reg, val) \
-+ (((reg) & ~mask) | (val << (shift)))
-+
-+#define PWM_OSC_CLK 24000000
-+#define PWM_PRESCALER_MAX 256
-+#define PWM_CLK_DIV_M__MAX 9
-+#define PWM_ENTIRE_CYCLE_MAX 65536
-+
-+struct sun8i_pwm_data {
-+ unsigned int npwm;
-+};
-+
-+struct sun8i_pwm_chip {
-+ struct pwm_chip chip;
-+ struct clk *clk;
-+ struct reset_control *rst_clk;
-+ void __iomem *base;
-+ const struct sun8i_pwm_data *data;
-+};
-+
-+static inline struct sun8i_pwm_chip *to_sun8i_pwm_chip(struct pwm_chip *chip)
-+{
-+ return container_of(chip, struct sun8i_pwm_chip, chip);
-+}
-+
-+static inline u32 sun8i_pwm_readl(struct sun8i_pwm_chip *chip,
-+ unsigned long offset)
-+{
-+ return readl(chip->base + offset);
-+}
-+
-+static inline void sun8i_pwm_writel(struct sun8i_pwm_chip *chip,
-+ u32 val, unsigned long offset)
-+{
-+ writel(val, chip->base + offset);
-+}
-+
-+static void sun8i_pwm_get_state(struct pwm_chip *chip,
-+ struct pwm_device *pwm,
-+ struct pwm_state *state)
-+{
-+ struct sun8i_pwm_chip *pc = to_sun8i_pwm_chip(chip);
-+ u64 clk_rate;
-+ u32 tmp, entire_cycles, active_cycles;
-+ unsigned int prescaler, div_m;
-+
-+ tmp = sun8i_pwm_readl(pc, PWM_GET_CLK_OFFSET(pwm->hwpwm));
-+ if (tmp & PWM_CLK_APB_SCR)
-+ clk_rate = clk_get_rate(pc->clk);
-+ else
-+ clk_rate = PWM_OSC_CLK;
-+
-+ tmp = sun8i_pwm_readl(pc, PWM_GET_CLK_OFFSET(pwm->hwpwm));
-+ div_m = 0x1 << (tmp & PWM_DIV_M_MASK);
-+
-+ tmp = sun8i_pwm_readl(pc, PWM_CTL_REG(pwm->hwpwm));
-+ prescaler = (tmp & PWM_PRESCAL_K_MASK) + 1;
-+
-+ tmp = sun8i_pwm_readl(pc, PWM_PERIOD_REG(pwm->hwpwm));
-+ entire_cycles = (tmp >> PWM_ENTIRE_CYCLE) + 1;
-+ active_cycles = (tmp & PWM_ACT_CYCLE_MASK);
-+
-+ /* (clk / div_m / prescaler) / entire_cycles = NSEC_PER_SEC / period_ns. */
-+ state->period = DIV_ROUND_CLOSEST_ULL(entire_cycles * NSEC_PER_SEC,
-+ clk_rate) * div_m * prescaler;
-+ /* duty_ns / period_ns = active_cycles / entire_cycles. */
-+ state->duty_cycle = DIV_ROUND_CLOSEST_ULL(active_cycles * state->period,
-+ entire_cycles);
-+
-+ /* parsing polarity */
-+ tmp = sun8i_pwm_readl(pc, PWM_CTL_REG(pwm->hwpwm));
-+ if (tmp & PWM_ACT_STA)
-+ state->polarity = PWM_POLARITY_NORMAL;
-+ else
-+ state->polarity = PWM_POLARITY_INVERSED;
-+
-+ /* parsing enabled */
-+ tmp = sun8i_pwm_readl(pc, PWM_ENABLE_REG);
-+ if (tmp & BIT_CH(PWM_EN, pwm->hwpwm))
-+ state->enabled = true;
-+ else
-+ state->enabled = false;
-+
-+ dev_dbg(chip->dev, "duty_ns=%lld period_ns=%lld polarity=%s enabled=%s.\n",
-+ state->duty_cycle, state->period,
-+ state->polarity ? "inversed":"normal",
-+ state->enabled ? "true":"false");
-+}
-+
-+static void sun8i_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm,
-+ enum pwm_polarity polarity)
-+{
-+ struct sun8i_pwm_chip *pc = to_sun8i_pwm_chip(chip);
-+ u32 temp;
-+
-+ temp = sun8i_pwm_readl(pc, PWM_CTL_REG(pwm->hwpwm));
-+
-+ if (polarity == PWM_POLARITY_NORMAL)
-+ temp |= PWM_ACT_STA;
-+ else
-+ temp &= ~PWM_ACT_STA;
-+
-+ sun8i_pwm_writel(pc, temp, PWM_CTL_REG(pwm->hwpwm));
-+}
-+
-+static int sun8i_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
-+ const struct pwm_state *state)
-+{
-+ struct sun8i_pwm_chip *pc = to_sun8i_pwm_chip(chip);
-+ unsigned long long c;
-+ unsigned long entire_cycles, active_cycles;
-+ unsigned int div_m, prescaler;
-+ u64 duty_ns = state->duty_cycle, period_ns = state->period;
-+ u32 config;
-+ int ret = 0;
-+
-+ if (period_ns > 334) {
-+ /* if freq < 3M, then select 24M clock */
-+ c = PWM_OSC_CLK;
-+ config = sun8i_pwm_readl(pc, PWM_GET_CLK_OFFSET(pwm->hwpwm));
-+ config &= ~PWM_CLK_APB_SCR;
-+ sun8i_pwm_writel(pc, config, PWM_GET_CLK_OFFSET(pwm->hwpwm));
-+ } else {
-+ /* if freq > 3M, then select APB as clock */
-+ c = clk_get_rate(pc->clk);
-+ config = sun8i_pwm_readl(pc, PWM_GET_CLK_OFFSET(pwm->hwpwm));
-+ config |= PWM_CLK_APB_SCR;
-+ sun8i_pwm_writel(pc, config, PWM_GET_CLK_OFFSET(pwm->hwpwm));
-+ }
-+
-+ dev_dbg(chip->dev, "duty_ns=%lld period_ns=%lld c =%llu.\n",
-+ duty_ns, period_ns, c);
-+
-+ /*
-+ * (clk / div_m / prescaler) / entire_cycles = NSEC_PER_SEC / period_ns.
-+ * So, entire_cycles = clk * period_ns / NSEC_PER_SEC / div_m / prescaler.
-+ */
-+ c = c * period_ns;
-+ c = DIV_ROUND_CLOSEST_ULL(c, NSEC_PER_SEC);
-+ for (div_m = 0; div_m < PWM_CLK_DIV_M__MAX; div_m++) {
-+ for (prescaler = 0; prescaler < PWM_PRESCALER_MAX; prescaler++) {
-+ /*
-+ * actual prescaler = prescaler(reg value) + 1.
-+ * actual div_m = 0x1 << div_m(reg value).
-+ */
-+ entire_cycles = ((unsigned long)c >> div_m)/(prescaler + 1);
-+ if (entire_cycles <= PWM_ENTIRE_CYCLE_MAX)
-+ goto calc_end;
-+ }
-+ }
-+ ret = -EINVAL;
-+ goto exit;
-+
-+calc_end:
-+ /*
-+ * duty_ns / period_ns = active_cycles / entire_cycles.
-+ * So, active_cycles = entire_cycles * duty_ns / period_ns.
-+ */
-+ c = (unsigned long long)entire_cycles * duty_ns;
-+ c = DIV_ROUND_CLOSEST_ULL(c, period_ns);
-+ active_cycles = c;
-+ if (entire_cycles == 0)
-+ entire_cycles++;
-+
-+ /* config clk div_m*/
-+ config = sun8i_pwm_readl(pc, PWM_GET_CLK_OFFSET(pwm->hwpwm));
-+ config = SET_BITS(PWM_DIV_M, PWM_DIV_M_MASK, config, div_m);
-+ sun8i_pwm_writel(pc, config, PWM_GET_CLK_OFFSET(pwm->hwpwm));
-+
-+ /* config prescaler */
-+ config = sun8i_pwm_readl(pc, PWM_CTL_REG(pwm->hwpwm));
-+ config = SET_BITS(PWM_PRESCAL_K, PWM_PRESCAL_K_MASK, config, prescaler);
-+ sun8i_pwm_writel(pc, config, PWM_CTL_REG(pwm->hwpwm));
-+
-+ /* config active and period cycles */
-+ config = sun8i_pwm_readl(pc, PWM_PERIOD_REG(pwm->hwpwm));
-+ config = SET_BITS(PWM_ACT_CYCLE, PWM_ACT_CYCLE_MASK, config, active_cycles);
-+ config = SET_BITS(PWM_ENTIRE_CYCLE, PWM_ENTIRE_CYCLE_MASK,
-+ config, (entire_cycles - 1));
-+ sun8i_pwm_writel(pc, config, PWM_PERIOD_REG(pwm->hwpwm));
-+
-+ dev_dbg(chip->dev, "active_cycles=%lu entire_cycles=%lu prescaler=%u div_m=%u\n",
-+ active_cycles, entire_cycles, prescaler, div_m);
-+
-+exit:
-+ return ret;
-+}
-+
-+static void sun8i_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm,
-+ bool enable)
-+{
-+ struct sun8i_pwm_chip *pc = to_sun8i_pwm_chip(chip);
-+ u32 clk, pwm_en;
-+
-+ clk = sun8i_pwm_readl(pc, PWM_CLK_REG);
-+ pwm_en = sun8i_pwm_readl(pc, PWM_ENABLE_REG);
-+
-+ if (enable) {
-+ clk |= BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
-+ sun8i_pwm_writel(pc, clk, PWM_CLK_REG);
-+
-+ pwm_en |= BIT_CH(PWM_EN, pwm->hwpwm);
-+ sun8i_pwm_writel(pc, pwm_en, PWM_ENABLE_REG);
-+ } else {
-+ pwm_en &= ~BIT_CH(PWM_EN, pwm->hwpwm);
-+ sun8i_pwm_writel(pc, pwm_en, PWM_ENABLE_REG);
-+
-+ clk &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
-+ sun8i_pwm_writel(pc, clk, PWM_CLK_REG);
-+ }
-+}
-+
-+static int sun8i_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
-+ const struct pwm_state *state)
-+{
-+ struct pwm_state curstate;
-+ int ret;
-+
-+ pwm_get_state(pwm, &curstate);
-+
-+ ret = sun8i_pwm_config(chip, pwm, state);
-+
-+ if (state->polarity != curstate.polarity)
-+ sun8i_pwm_set_polarity(chip, pwm, state->polarity);
-+
-+ if (state->enabled != curstate.enabled)
-+ sun8i_pwm_enable(chip, pwm, state->enabled);
-+
-+ return ret;
-+}
-+
-+static const struct pwm_ops sun8i_pwm_ops = {
-+ .get_state = sun8i_pwm_get_state,
-+ .apply = sun8i_pwm_apply,
-+ .owner = THIS_MODULE,
-+};
-+
-+static const struct sun8i_pwm_data sun8i_pwm_data_c9 = {
-+ .npwm = 9,
-+};
-+
-+static const struct sun8i_pwm_data sun50i_pwm_data_c16 = {
-+ .npwm = 16,
-+};
-+
-+static const struct of_device_id sun8i_pwm_dt_ids[] = {
-+ {
-+ .compatible = "allwinner,sun8i-v536-pwm",
-+ .data = &sun8i_pwm_data_c9,
-+ }, {
-+ .compatible = "allwinner,sun50i-r818-pwm",
-+ .data = &sun50i_pwm_data_c16,
-+ }, {
-+ /* sentinel */
-+ },
-+};
-+MODULE_DEVICE_TABLE(of, sun8i_pwm_dt_ids);
-+
-+static int sun8i_pwm_probe(struct platform_device *pdev)
-+{
-+ struct sun8i_pwm_chip *pc;
-+ int ret;
-+
-+ pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
-+ if (!pc)
-+ return dev_err_probe(&pdev->dev, -ENOMEM,
-+ "memory allocation failed\n");
-+
-+ pc->data = of_device_get_match_data(&pdev->dev);
-+ if (!pc->data)
-+ return dev_err_probe(&pdev->dev, -ENODEV,
-+ "can't get match data\n");
-+
-+ pc->base = devm_platform_ioremap_resource(pdev, 0);
-+ if (IS_ERR(pc->base))
-+ return dev_err_probe(&pdev->dev, PTR_ERR(pc->base),
-+ "can't remap pwm resource\n");
-+
-+ pc->clk = devm_clk_get(&pdev->dev, NULL);
-+ if (IS_ERR(pc->clk))
-+ return dev_err_probe(&pdev->dev, PTR_ERR(pc->clk),
-+ "get clock failed\n");
-+
-+ pc->rst_clk = devm_reset_control_get_exclusive(&pdev->dev, NULL);
-+ if (IS_ERR(pc->rst_clk))
-+ return dev_err_probe(&pdev->dev, PTR_ERR(pc->rst_clk),
-+ "get reset failed\n");
-+
-+ /* Deassert reset */
-+ ret = reset_control_deassert(pc->rst_clk);
-+ if (ret < 0)
-+ return dev_err_probe(&pdev->dev, ret,
-+ "cannot deassert reset control\n");
-+
-+ ret = clk_prepare_enable(pc->clk);
-+ if (ret) {
-+ dev_err(&pdev->dev, "cannot prepare and enable clk %pe\n",
-+ ERR_PTR(ret));
-+ goto err_clk;
-+ }
-+
-+ pc->chip.dev = &pdev->dev;
-+ pc->chip.ops = &sun8i_pwm_ops;
-+ pc->chip.npwm = pc->data->npwm;
-+ pc->chip.of_xlate = of_pwm_xlate_with_flags;
-+ pc->chip.base = -1;
-+ pc->chip.of_pwm_n_cells = 3;
-+
-+ ret = pwmchip_add(&pc->chip);
-+ if (ret < 0) {
-+ dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret);
-+ goto err_pwm_add;
-+ }
-+
-+ platform_set_drvdata(pdev, pc);
-+
-+ return 0;
-+
-+err_pwm_add:
-+ clk_disable_unprepare(pc->clk);
-+err_clk:
-+ reset_control_assert(pc->rst_clk);
-+
-+ return ret;
-+}
-+
-+static int sun8i_pwm_remove(struct platform_device *pdev)
-+{
-+ struct sun8i_pwm_chip *pc = platform_get_drvdata(pdev);
-+ int ret;
-+
-+ ret = pwmchip_remove(&pc->chip);
-+ if (ret)
-+ return ret;
-+
-+ clk_disable_unprepare(pc->clk);
-+ reset_control_assert(pc->rst_clk);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver sun8i_pwm_driver = {
-+ .driver = {
-+ .name = "sun8i-pwm-v536",
-+ .of_match_table = sun8i_pwm_dt_ids,
-+ },
-+ .probe = sun8i_pwm_probe,
-+ .remove = sun8i_pwm_remove,
-+};
-+module_platform_driver(sun8i_pwm_driver);
-+
-+MODULE_ALIAS("platform:sun8i-v536-pwm");
-+MODULE_AUTHOR("Ban Tao <fengzheng923@gmail.com>");
-+MODULE_DESCRIPTION("Allwinner sun8i-v536 PWM driver");
-+MODULE_LICENSE("GPL v2");
+++ /dev/null
-From 2f452dd6047126c42a0ad32ef0f10145c6047d66 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 6 Jun 2021 11:05:20 -0500
-Subject: [PATCH 061/117] squash? pwm: sunxi: Add Allwinner SoC PWM controller
- driver
-
----
- drivers/pwm/Kconfig | 4 ++--
- drivers/pwm/pwm-sun8i-v536.c | 6 +-----
- 2 files changed, 3 insertions(+), 7 deletions(-)
-
---- a/drivers/pwm/Kconfig
-+++ b/drivers/pwm/Kconfig
-@@ -583,11 +583,11 @@ config PWM_SUN4I
- will be called pwm-sun4i.
-
- config PWM_SUN8I_V536
-- tristate "Allwinner SUN8I_V536 PWM support"
-+ tristate "Allwinner SUN8I V536 enhanced PWM support"
- depends on ARCH_SUNXI || COMPILE_TEST
- depends on HAS_IOMEM && COMMON_CLK
- help
-- Enhanced PWM framework driver for Allwinner R818, A133, R329,
-+ Enhanced PWM framework driver for Allwinner A133, D1, R329, R818,
- V536 and V833 SoCs.
-
- To compile this driver as a module, choose M here: the module
---- a/drivers/pwm/pwm-sun8i-v536.c
-+++ b/drivers/pwm/pwm-sun8i-v536.c
-@@ -373,12 +373,8 @@ err_clk:
- static int sun8i_pwm_remove(struct platform_device *pdev)
- {
- struct sun8i_pwm_chip *pc = platform_get_drvdata(pdev);
-- int ret;
--
-- ret = pwmchip_remove(&pc->chip);
-- if (ret)
-- return ret;
-
-+ pwmchip_remove(&pc->chip);
- clk_disable_unprepare(pc->clk);
- reset_control_assert(pc->rst_clk);
-
+++ /dev/null
-From 8bb576d8640fdf896650a4d4a1b2e60254d75eb2 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 6 Jun 2021 10:56:25 -0500
-Subject: [PATCH 062/117] pwm: sun8i-v536: Add support for the Allwinner D1
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- drivers/pwm/pwm-sun8i-v536.c | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/drivers/pwm/pwm-sun8i-v536.c
-+++ b/drivers/pwm/pwm-sun8i-v536.c
-@@ -285,6 +285,10 @@ static const struct sun8i_pwm_data sun8i
- .npwm = 9,
- };
-
-+static const struct sun8i_pwm_data sun20i_pwm_data_c8 = {
-+ .npwm = 8,
-+};
-+
- static const struct sun8i_pwm_data sun50i_pwm_data_c16 = {
- .npwm = 16,
- };
-@@ -294,6 +298,9 @@ static const struct of_device_id sun8i_p
- .compatible = "allwinner,sun8i-v536-pwm",
- .data = &sun8i_pwm_data_c9,
- }, {
-+ .compatible = "allwinner,sun20i-d1-pwm",
-+ .data = &sun20i_pwm_data_c8,
-+ }, {
- .compatible = "allwinner,sun50i-r818-pwm",
- .data = &sun50i_pwm_data_c16,
- }, {
+++ /dev/null
-From 2ee8994e4db3978261e6c644e897400c4df5edeb Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Thu, 11 Aug 2022 22:24:52 -0500
-Subject: [PATCH 063/117] riscv: dts: allwinner: d1: Add PWM support
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi | 35 ++++++++++++++++++++
- 1 file changed, 35 insertions(+)
-
---- a/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
-+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
-@@ -155,6 +155,30 @@
- };
-
- /omit-if-no-ref/
-+ pwm0_pd16_pin: pwm0-pd16-pin {
-+ pins = "PD16";
-+ function = "pwm0";
-+ };
-+
-+ /omit-if-no-ref/
-+ pwm2_pd18_pin: pwm2-pd18-pin {
-+ pins = "PD18";
-+ function = "pwm2";
-+ };
-+
-+ /omit-if-no-ref/
-+ pwm4_pd20_pin: pwm4-pd20-pin {
-+ pins = "PD20";
-+ function = "pwm4";
-+ };
-+
-+ /omit-if-no-ref/
-+ pwm7_pd22_pin: pwm7-pd22-pin {
-+ pins = "PD22";
-+ function = "pwm7";
-+ };
-+
-+ /omit-if-no-ref/
- uart0_pb8_pins: uart0-pb8-pins {
- pins = "PB8", "PB9";
- function = "uart0";
-@@ -173,6 +197,17 @@
- };
- };
-
-+ pwm: pwm@2000c00 {
-+ compatible = "allwinner,sun20i-d1-pwm";
-+ reg = <0x2000c00 0x400>;
-+ interrupts = <34 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_PWM>, <&osc24M>;
-+ clock-names = "bus", "mod";
-+ resets = <&ccu RST_BUS_PWM>;
-+ status = "disabled";
-+ #pwm-cells = <3>;
-+ };
-+
- ccu: clock-controller@2001000 {
- compatible = "allwinner,sun20i-d1-ccu";
- reg = <0x2001000 0x1000>;
+++ /dev/null
-From 5479c8efb6ffbbc8b7fd1068337037faf9c20a36 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Thu, 11 Aug 2022 22:25:40 -0500
-Subject: [PATCH 064/117] riscv: dts: allwinner: d1: Hook up PWM-controlled CPU
- voltage regulators
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- .../allwinner/sun20i-d1-clockworkpi-v3.14.dts | 19 +++++++++++--------
- .../sun20i-d1-dongshan-nezha-stu.dts | 19 +++++++++++--------
- .../boot/dts/allwinner/sun20i-d1-nezha.dts | 19 +++++++++++--------
- 3 files changed, 33 insertions(+), 24 deletions(-)
-
---- a/arch/riscv/boot/dts/allwinner/sun20i-d1-clockworkpi-v3.14.dts
-+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-clockworkpi-v3.14.dts
-@@ -48,16 +48,13 @@
- };
- };
-
-- /*
-- * This regulator is PWM-controlled, but the PWM controller is not
-- * yet supported, so fix the regulator to its default voltage.
-- */
- reg_vdd_cpu: vdd-cpu {
-- compatible = "regulator-fixed";
-+ compatible = "pwm-regulator";
-+ pwms = <&pwm 0 50000 0>;
-+ pwm-supply = <®_vcc>;
- regulator-name = "vdd-cpu";
-- regulator-min-microvolt = <1100000>;
-- regulator-max-microvolt = <1100000>;
-- vin-supply = <®_vcc>;
-+ regulator-min-microvolt = <810000>;
-+ regulator-max-microvolt = <1160000>;
- };
-
- wifi_pwrseq: wifi-pwrseq {
-@@ -254,6 +251,12 @@
- };
- };
-
-+&pwm {
-+ pinctrl-0 = <&pwm0_pd16_pin>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+};
-+
- &uart0 {
- pinctrl-0 = <&uart0_pb8_pins>;
- pinctrl-names = "default";
---- a/arch/riscv/boot/dts/allwinner/sun20i-d1-dongshan-nezha-stu.dts
-+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-dongshan-nezha-stu.dts
-@@ -43,16 +43,13 @@
- vin-supply = <®_vcc>;
- };
-
-- /*
-- * This regulator is PWM-controlled, but the PWM controller is not
-- * yet supported, so fix the regulator to its default voltage.
-- */
- reg_vdd_cpu: vdd-cpu {
-- compatible = "regulator-fixed";
-+ compatible = "pwm-regulator";
-+ pwms = <&pwm 0 50000 0>;
-+ pwm-supply = <®_vcc>;
- regulator-name = "vdd-cpu";
-- regulator-min-microvolt = <1100000>;
-- regulator-max-microvolt = <1100000>;
-- vin-supply = <®_vcc>;
-+ regulator-min-microvolt = <810000>;
-+ regulator-max-microvolt = <1160000>;
- };
- };
-
-@@ -95,6 +92,12 @@
- status = "okay";
- };
-
-+&pwm {
-+ pinctrl-0 = <&pwm0_pd16_pin>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+};
-+
- &uart0 {
- pinctrl-0 = <&uart0_pb8_pins>;
- pinctrl-names = "default";
---- a/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
-+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
-@@ -35,16 +35,13 @@
- vin-supply = <®_vcc>;
- };
-
-- /*
-- * This regulator is PWM-controlled, but the PWM controller is not
-- * yet supported, so fix the regulator to its default voltage.
-- */
- reg_vdd_cpu: vdd-cpu {
-- compatible = "regulator-fixed";
-+ compatible = "pwm-regulator";
-+ pwms = <&pwm 0 50000 0>;
-+ pwm-supply = <®_vcc>;
- regulator-name = "vdd-cpu";
-- regulator-min-microvolt = <1100000>;
-- regulator-max-microvolt = <1100000>;
-- vin-supply = <®_vcc>;
-+ regulator-min-microvolt = <810000>;
-+ regulator-max-microvolt = <1160000>;
- };
-
- wifi_pwrseq: wifi-pwrseq {
-@@ -155,6 +152,12 @@
- status = "okay";
- };
-
-+&pwm {
-+ pinctrl-0 = <&pwm0_pd16_pin>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+};
-+
- &uart0 {
- pinctrl-0 = <&uart0_pb8_pins>;
- pinctrl-names = "default";
+++ /dev/null
-From 29360e65c326ea8bbac6e63b42aa91fb8f14d3bf Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Thu, 11 Aug 2022 22:57:13 -0500
-Subject: [PATCH 065/117] riscv: dts: allwinner: mangopi-mq-pro: Add PWM LED
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- .../boot/dts/allwinner/sun20i-d1-mangopi-mq-pro.dts | 12 ++++++++++++
- 1 file changed, 12 insertions(+)
-
---- a/arch/riscv/boot/dts/allwinner/sun20i-d1-mangopi-mq-pro.dts
-+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-mangopi-mq-pro.dts
-@@ -4,6 +4,7 @@
- /dts-v1/;
-
- #include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/leds/common.h>
-
- #include "sun20i-d1.dtsi"
- #include "sun20i-d1-common-regulators.dtsi"
-@@ -22,6 +23,17 @@
- stdout-path = "serial0:115200n8";
- };
-
-+ leds {
-+ compatible = "pwm-leds";
-+
-+ led {
-+ color = <LED_COLOR_ID_BLUE>;
-+ function = LED_FUNCTION_STATUS;
-+ max-brightness = <255>;
-+ pwms = <&pwm 2 50000 0>;
-+ };
-+ };
-+
- reg_avdd2v8: avdd2v8 {
- compatible = "regulator-fixed";
- regulator-name = "avdd2v8";
+++ /dev/null
-From bccb19038038c7377275d74bb815f5f9363ba2e3 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sat, 13 Nov 2021 10:08:41 -0600
-Subject: [PATCH 066/117] ASoC: dt-bindings: sun4i-spdif: Require resets for H6
-
-The H6 variant has a module reset, and it is used by the driver. So the
-resets property should be required in the binding for this variant.
-
-Fixes: b20453031472 ("dt-bindings: sound: sun4i-spdif: Add Allwinner H6 compatible")
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- .../devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml
-+++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml
-@@ -61,6 +61,7 @@ allOf:
- enum:
- - allwinner,sun6i-a31-spdif
- - allwinner,sun8i-h3-spdif
-+ - allwinner,sun50i-h6-spdif
-
- then:
- required:
+++ /dev/null
-From 4e72722bfb7dec028e11278a924bb8bef3e10897 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sat, 13 Nov 2021 10:48:24 -0600
-Subject: [PATCH 067/117] ASoC: dt-bindings: sun4i-spdif: Add compatible for D1
-
-D1 mostly keeps the existing register layout, but it separates the
-module clock into separate clocks for the RX block and the TX block.
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- .../sound/allwinner,sun4i-a10-spdif.yaml | 54 +++++++++++++++----
- 1 file changed, 44 insertions(+), 10 deletions(-)
-
---- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml
-+++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml
-@@ -18,10 +18,12 @@ properties:
-
- compatible:
- oneOf:
-- - const: allwinner,sun4i-a10-spdif
-- - const: allwinner,sun6i-a31-spdif
-- - const: allwinner,sun8i-h3-spdif
-- - const: allwinner,sun50i-h6-spdif
-+ - enum:
-+ - allwinner,sun4i-a10-spdif
-+ - allwinner,sun6i-a31-spdif
-+ - allwinner,sun8i-h3-spdif
-+ - allwinner,sun20i-d1-spdif
-+ - allwinner,sun50i-h6-spdif
- - items:
- - const: allwinner,sun8i-a83t-spdif
- - const: allwinner,sun8i-h3-spdif
-@@ -36,14 +38,12 @@ properties:
- maxItems: 1
-
- clocks:
-- items:
-- - description: Bus Clock
-- - description: Module Clock
-+ minItems: 2
-+ maxItems: 3
-
- clock-names:
-- items:
-- - const: apb
-- - const: spdif
-+ minItems: 2
-+ maxItems: 3
-
- # Even though it only applies to subschemas under the conditionals,
- # not listing them here will trigger a warning because of the
-@@ -59,8 +59,42 @@ allOf:
- compatible:
- contains:
- enum:
-+ - allwinner,sun20i-d1-spdif
-+
-+ then:
-+ properties:
-+ clocks:
-+ items:
-+ - description: Bus Clock
-+ - description: RX Module Clock
-+ - description: TX Module Clock
-+
-+ clock-names:
-+ items:
-+ - const: apb
-+ - const: rx
-+ - const: tx
-+
-+ else:
-+ properties:
-+ clocks:
-+ items:
-+ - description: Bus Clock
-+ - description: Module Clock
-+
-+ clock-names:
-+ items:
-+ - const: apb
-+ - const: spdif
-+
-+ - if:
-+ properties:
-+ compatible:
-+ contains:
-+ enum:
- - allwinner,sun6i-a31-spdif
- - allwinner,sun8i-h3-spdif
-+ - allwinner,sun20i-d1-spdif
- - allwinner,sun50i-h6-spdif
-
- then:
+++ /dev/null
-From 1d85b3609cf4239f7e971b839f1ab985413cd560 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sat, 13 Nov 2021 11:12:14 -0600
-Subject: [PATCH 068/117] ASoC: sun4i-spdif: Assert reset when removing the
- device
-
-This completes reversing the process done in the probe function.
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- sound/soc/sunxi/sun4i-spdif.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/sound/soc/sunxi/sun4i-spdif.c
-+++ b/sound/soc/sunxi/sun4i-spdif.c
-@@ -710,10 +710,14 @@ err_unregister:
-
- static int sun4i_spdif_remove(struct platform_device *pdev)
- {
-+ struct sun4i_spdif_dev *host = dev_get_drvdata(&pdev->dev);
-+
- pm_runtime_disable(&pdev->dev);
- if (!pm_runtime_status_suspended(&pdev->dev))
- sun4i_spdif_runtime_suspend(&pdev->dev);
-
-+ reset_control_assert(host->rst);
-+
- return 0;
- }
-
+++ /dev/null
-From 0efd742482dbe4b17a441eab5c57231d65f9a852 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sat, 13 Nov 2021 11:14:30 -0600
-Subject: [PATCH 069/117] ASoC: sun4i-spdif: Simplify code around optional
- resets
-
-The driver does not need to care about which variants have a reset;
-the devicetree binding already enforces that the necessary resources are
-provided. Simplify the logic by always calling the optional getter,
-which will return NULL if no reset reference is found.
-
-Also clean up the error handling, which should not print a misleading
-error in the EPROBE_DEFER case.
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- sound/soc/sunxi/sun4i-spdif.c | 22 ++++++----------------
- 1 file changed, 6 insertions(+), 16 deletions(-)
-
---- a/sound/soc/sunxi/sun4i-spdif.c
-+++ b/sound/soc/sunxi/sun4i-spdif.c
-@@ -170,12 +170,10 @@
- * struct sun4i_spdif_quirks - Differences between SoC variants.
- *
- * @reg_dac_txdata: TX FIFO offset for DMA config.
-- * @has_reset: SoC needs reset deasserted.
- * @val_fctl_ftx: TX FIFO flush bitmask.
- */
- struct sun4i_spdif_quirks {
- unsigned int reg_dac_txdata;
-- bool has_reset;
- unsigned int val_fctl_ftx;
- };
-
-@@ -546,19 +544,16 @@ static const struct sun4i_spdif_quirks s
- static const struct sun4i_spdif_quirks sun6i_a31_spdif_quirks = {
- .reg_dac_txdata = SUN4I_SPDIF_TXFIFO,
- .val_fctl_ftx = SUN4I_SPDIF_FCTL_FTX,
-- .has_reset = true,
- };
-
- static const struct sun4i_spdif_quirks sun8i_h3_spdif_quirks = {
- .reg_dac_txdata = SUN8I_SPDIF_TXFIFO,
- .val_fctl_ftx = SUN4I_SPDIF_FCTL_FTX,
-- .has_reset = true,
- };
-
- static const struct sun4i_spdif_quirks sun50i_h6_spdif_quirks = {
- .reg_dac_txdata = SUN8I_SPDIF_TXFIFO,
- .val_fctl_ftx = SUN50I_H6_SPDIF_FCTL_FTX,
-- .has_reset = true,
- };
-
- static const struct of_device_id sun4i_spdif_of_match[] = {
-@@ -672,17 +667,12 @@ static int sun4i_spdif_probe(struct plat
-
- platform_set_drvdata(pdev, host);
-
-- if (quirks->has_reset) {
-- host->rst = devm_reset_control_get_optional_exclusive(&pdev->dev,
-- NULL);
-- if (PTR_ERR(host->rst) == -EPROBE_DEFER) {
-- ret = -EPROBE_DEFER;
-- dev_err(&pdev->dev, "Failed to get reset: %d\n", ret);
-- return ret;
-- }
-- if (!IS_ERR(host->rst))
-- reset_control_deassert(host->rst);
-- }
-+ host->rst = devm_reset_control_get_optional_exclusive(&pdev->dev, NULL);
-+ if (IS_ERR(host->rst))
-+ return dev_err_probe(&pdev->dev, PTR_ERR(host->rst),
-+ "Failed to get reset\n");
-+
-+ reset_control_deassert(host->rst);
-
- ret = devm_snd_soc_register_component(&pdev->dev,
- &sun4i_spdif_component, &sun4i_spdif_dai, 1);
+++ /dev/null
-From b42a9e0cf6b0ca78b4ef5310de967d515a3cca03 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 13 Jun 2021 23:53:16 -0500
-Subject: [PATCH 070/117] ASoC: sun4i-spdif: Add support for separate RX/TX
- clocks
-
-On older variants of the hardware, the RX and TX blocks share a single
-module clock, named "spdif" in the DT binding. The D1 variant has
-separate RX and TX clocks, so the TX module clock is named "tx" in the
-binding. To support this, supply the clock name in the quirks structure.
-
-Since the driver supports only TX, only the TX clock name is needed.
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- sound/soc/sunxi/sun4i-spdif.c | 24 +++++++++++++++---------
- 1 file changed, 15 insertions(+), 9 deletions(-)
-
---- a/sound/soc/sunxi/sun4i-spdif.c
-+++ b/sound/soc/sunxi/sun4i-spdif.c
-@@ -169,18 +169,20 @@
- /**
- * struct sun4i_spdif_quirks - Differences between SoC variants.
- *
-+ * @tx_clk_name: firmware name for the TX clock reference.
- * @reg_dac_txdata: TX FIFO offset for DMA config.
- * @val_fctl_ftx: TX FIFO flush bitmask.
- */
- struct sun4i_spdif_quirks {
-+ const char *tx_clk_name;
- unsigned int reg_dac_txdata;
- unsigned int val_fctl_ftx;
- };
-
- struct sun4i_spdif_dev {
- struct platform_device *pdev;
-- struct clk *spdif_clk;
- struct clk *apb_clk;
-+ struct clk *tx_clk;
- struct reset_control *rst;
- struct snd_soc_dai_driver cpu_dai_drv;
- struct regmap *regmap;
-@@ -313,7 +315,7 @@ static int sun4i_spdif_hw_params(struct
- return -EINVAL;
- }
-
-- ret = clk_set_rate(host->spdif_clk, mclk);
-+ ret = clk_set_rate(host->tx_clk, mclk);
- if (ret < 0) {
- dev_err(&pdev->dev,
- "Setting SPDIF clock rate for %d Hz failed!\n", mclk);
-@@ -537,21 +539,25 @@ static struct snd_soc_dai_driver sun4i_s
- };
-
- static const struct sun4i_spdif_quirks sun4i_a10_spdif_quirks = {
-+ .tx_clk_name = "spdif",
- .reg_dac_txdata = SUN4I_SPDIF_TXFIFO,
- .val_fctl_ftx = SUN4I_SPDIF_FCTL_FTX,
- };
-
- static const struct sun4i_spdif_quirks sun6i_a31_spdif_quirks = {
-+ .tx_clk_name = "spdif",
- .reg_dac_txdata = SUN4I_SPDIF_TXFIFO,
- .val_fctl_ftx = SUN4I_SPDIF_FCTL_FTX,
- };
-
- static const struct sun4i_spdif_quirks sun8i_h3_spdif_quirks = {
-+ .tx_clk_name = "spdif",
- .reg_dac_txdata = SUN8I_SPDIF_TXFIFO,
- .val_fctl_ftx = SUN4I_SPDIF_FCTL_FTX,
- };
-
- static const struct sun4i_spdif_quirks sun50i_h6_spdif_quirks = {
-+ .tx_clk_name = "spdif",
- .reg_dac_txdata = SUN8I_SPDIF_TXFIFO,
- .val_fctl_ftx = SUN50I_H6_SPDIF_FCTL_FTX,
- };
-@@ -591,7 +597,7 @@ static int sun4i_spdif_runtime_suspend(s
- {
- struct sun4i_spdif_dev *host = dev_get_drvdata(dev);
-
-- clk_disable_unprepare(host->spdif_clk);
-+ clk_disable_unprepare(host->tx_clk);
- clk_disable_unprepare(host->apb_clk);
-
- return 0;
-@@ -602,12 +608,12 @@ static int sun4i_spdif_runtime_resume(st
- struct sun4i_spdif_dev *host = dev_get_drvdata(dev);
- int ret;
-
-- ret = clk_prepare_enable(host->spdif_clk);
-+ ret = clk_prepare_enable(host->tx_clk);
- if (ret)
- return ret;
- ret = clk_prepare_enable(host->apb_clk);
- if (ret)
-- clk_disable_unprepare(host->spdif_clk);
-+ clk_disable_unprepare(host->tx_clk);
-
- return ret;
- }
-@@ -655,10 +661,10 @@ static int sun4i_spdif_probe(struct plat
- return PTR_ERR(host->apb_clk);
- }
-
-- host->spdif_clk = devm_clk_get(&pdev->dev, "spdif");
-- if (IS_ERR(host->spdif_clk)) {
-- dev_err(&pdev->dev, "failed to get a spdif clock.\n");
-- return PTR_ERR(host->spdif_clk);
-+ host->tx_clk = devm_clk_get(&pdev->dev, quirks->tx_clk_name);
-+ if (IS_ERR(host->tx_clk)) {
-+ dev_err(&pdev->dev, "failed to get TX module clock.\n");
-+ return PTR_ERR(host->tx_clk);
- }
-
- host->dma_params_tx.addr = res->start + quirks->reg_dac_txdata;
+++ /dev/null
-From af01261bf4e334cad158519291e5bc38765c955f Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 13 Jun 2021 23:53:26 -0500
-Subject: [PATCH 071/117] ASoC: sun4i-spdif: Add support for the D1 variant
-
-The D1 variant is similar to the H6 variant, except for its clock setup.
-The clock tree changes impact some register fields on the RX side, but
-those are not yet relevant, because RX is not supported by this driver.
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- sound/soc/sunxi/sun4i-spdif.c | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/sound/soc/sunxi/sun4i-spdif.c
-+++ b/sound/soc/sunxi/sun4i-spdif.c
-@@ -556,6 +556,12 @@ static const struct sun4i_spdif_quirks s
- .val_fctl_ftx = SUN4I_SPDIF_FCTL_FTX,
- };
-
-+static const struct sun4i_spdif_quirks sun20i_d1_spdif_quirks = {
-+ .tx_clk_name = "tx",
-+ .reg_dac_txdata = SUN8I_SPDIF_TXFIFO,
-+ .val_fctl_ftx = SUN50I_H6_SPDIF_FCTL_FTX,
-+};
-+
- static const struct sun4i_spdif_quirks sun50i_h6_spdif_quirks = {
- .tx_clk_name = "spdif",
- .reg_dac_txdata = SUN8I_SPDIF_TXFIFO,
-@@ -576,6 +582,10 @@ static const struct of_device_id sun4i_s
- .data = &sun8i_h3_spdif_quirks,
- },
- {
-+ .compatible = "allwinner,sun20i-d1-spdif",
-+ .data = &sun20i_d1_spdif_quirks,
-+ },
-+ {
- .compatible = "allwinner,sun50i-h6-spdif",
- .data = &sun50i_h6_spdif_quirks,
- },
+++ /dev/null
-From 36153e325aa912268a5a5d4574dc7092e67c8008 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Wed, 17 Aug 2022 01:54:46 -0500
-Subject: [PATCH 072/117] riscv: dts: allwinner: d1: Add SPDIF support
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi | 16 ++++++++++++++++
- 1 file changed, 16 insertions(+)
-
---- a/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
-+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
-@@ -333,6 +333,22 @@
- #sound-dai-cells = <0>;
- };
-
-+ // TODO: add receive functionality
-+ spdif: spdif@2036000 {
-+ compatible = "allwinner,sun20i-d1-spdif";
-+ reg = <0x2036000 0x400>;
-+ interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_SPDIF>,
-+ <&ccu CLK_SPDIF_RX>,
-+ <&ccu CLK_SPDIF_TX>;
-+ clock-names = "apb", "rx", "tx";
-+ resets = <&ccu RST_BUS_SPDIF>;
-+ dmas = <&dma 2>, <&dma 2>;
-+ dma-names = "rx", "tx";
-+ status = "disabled";
-+ #sound-dai-cells = <0>;
-+ };
-+
- timer: timer@2050000 {
- compatible = "allwinner,sun20i-d1-timer",
- "allwinner,sun8i-a23-timer";
+++ /dev/null
-From c2b3f2c723e1b558afe5661bb91669e3b68154f7 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 13 Jun 2021 23:52:47 -0500
-Subject: [PATCH 073/117] ASoC: sun4i-spdif: Add support for separate resets
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- sound/soc/sunxi/sun4i-spdif.c | 5 +++--
- 1 file changed, 3 insertions(+), 2 deletions(-)
-
---- a/sound/soc/sunxi/sun4i-spdif.c
-+++ b/sound/soc/sunxi/sun4i-spdif.c
-@@ -28,10 +28,11 @@
- #include <sound/soc.h>
-
- #define SUN4I_SPDIF_CTL (0x00)
-+ #define SUN4I_SPDIF_CTL_RST_RX BIT(12)
- #define SUN4I_SPDIF_CTL_MCLKDIV(v) ((v) << 4) /* v even */
- #define SUN4I_SPDIF_CTL_MCLKOUTEN BIT(2)
- #define SUN4I_SPDIF_CTL_GEN BIT(1)
-- #define SUN4I_SPDIF_CTL_RESET BIT(0)
-+ #define SUN4I_SPDIF_CTL_RST_TX BIT(0)
-
- #define SUN4I_SPDIF_TXCFG (0x04)
- #define SUN4I_SPDIF_TXCFG_SINGLEMOD BIT(31)
-@@ -196,7 +197,7 @@ static void sun4i_spdif_configure(struct
- const struct sun4i_spdif_quirks *quirks = host->quirks;
-
- /* soft reset SPDIF */
-- regmap_write(host->regmap, SUN4I_SPDIF_CTL, SUN4I_SPDIF_CTL_RESET);
-+ regmap_write(host->regmap, SUN4I_SPDIF_CTL, SUN4I_SPDIF_CTL_RST_TX);
-
- /* flush TX FIFO */
- regmap_update_bits(host->regmap, SUN4I_SPDIF_FCTL,
+++ /dev/null
-From e8e8a9490b2d4acc8670256dd3ba7d2a77346c4d Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Thu, 11 Aug 2022 22:23:05 -0500
-Subject: [PATCH 074/117] dt-bindings: spi: sun6i: Add R329 variant
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- .../devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml
-+++ b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml
-@@ -21,6 +21,7 @@ properties:
- oneOf:
- - const: allwinner,sun6i-a31-spi
- - const: allwinner,sun8i-h3-spi
-+ - const: allwinner,sun50i-r329-spi
- - items:
- - enum:
- - allwinner,sun8i-r40-spi
-@@ -28,6 +29,13 @@ properties:
- - allwinner,sun50i-h616-spi
- - allwinner,suniv-f1c100s-spi
- - const: allwinner,sun8i-h3-spi
-+ - items:
-+ - const: allwinner,sun20i-d1-spi
-+ - const: allwinner,sun50i-r329-spi
-+ - items:
-+ - const: allwinner,sun20i-d1-spi-dbi
-+ - const: allwinner,sun50i-r329-spi-dbi
-+ - const: allwinner,sun50i-r329-spi
-
- reg:
- maxItems: 1
+++ /dev/null
-From dbc9e83cefe51d19877a4a7349ebbeafa31c0e06 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Fri, 16 Jul 2021 21:33:16 -0500
-Subject: [PATCH 075/117] spi: spi-sun6i: Use a struct for quirks
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- drivers/spi/spi-sun6i.c | 32 ++++++++++++++++++++++----------
- 1 file changed, 22 insertions(+), 10 deletions(-)
-
---- a/drivers/spi/spi-sun6i.c
-+++ b/drivers/spi/spi-sun6i.c
-@@ -85,7 +85,12 @@
- #define SUN6I_TXDATA_REG 0x200
- #define SUN6I_RXDATA_REG 0x300
-
-+struct sun6i_spi_quirks {
-+ unsigned long fifo_depth;
-+};
-+
- struct sun6i_spi {
-+ const struct sun6i_spi_quirks *quirks;
- struct spi_master *master;
- void __iomem *base_addr;
- dma_addr_t dma_addr_rx;
-@@ -100,7 +105,6 @@ struct sun6i_spi {
- const u8 *tx_buf;
- u8 *rx_buf;
- int len;
-- unsigned long fifo_depth;
- };
-
- static inline u32 sun6i_spi_read(struct sun6i_spi *sspi, u32 reg)
-@@ -157,7 +161,7 @@ static inline void sun6i_spi_fill_fifo(s
- u8 byte;
-
- /* See how much data we can fit */
-- cnt = sspi->fifo_depth - sun6i_spi_get_tx_fifo_count(sspi);
-+ cnt = sspi->quirks->fifo_depth - sun6i_spi_get_tx_fifo_count(sspi);
-
- len = min((int)cnt, sspi->len);
-
-@@ -300,14 +304,14 @@ static int sun6i_spi_transfer_one(struct
- * the hardcoded value used in old generation of Allwinner
- * SPI controller. (See spi-sun4i.c)
- */
-- trig_level = sspi->fifo_depth / 4 * 3;
-+ trig_level = sspi->quirks->fifo_depth / 4 * 3;
- } else {
- /*
- * Setup FIFO DMA request trigger level
- * We choose 1/2 of the full fifo depth, that value will
- * be used as DMA burst length.
- */
-- trig_level = sspi->fifo_depth / 2;
-+ trig_level = sspi->quirks->fifo_depth / 2;
-
- if (tfr->tx_buf)
- reg |= SUN6I_FIFO_CTL_TF_DRQ_EN;
-@@ -421,9 +425,9 @@ static int sun6i_spi_transfer_one(struct
- reg = SUN6I_INT_CTL_TC;
-
- if (!use_dma) {
-- if (rx_len > sspi->fifo_depth)
-+ if (rx_len > sspi->quirks->fifo_depth)
- reg |= SUN6I_INT_CTL_RF_RDY;
-- if (tx_len > sspi->fifo_depth)
-+ if (tx_len > sspi->quirks->fifo_depth)
- reg |= SUN6I_INT_CTL_TF_ERQ;
- }
-
-@@ -569,7 +573,7 @@ static bool sun6i_spi_can_dma(struct spi
- * the fifo length we can just fill the fifo and wait for a single
- * irq, so don't bother setting up dma
- */
-- return xfer->len > sspi->fifo_depth;
-+ return xfer->len > sspi->quirks->fifo_depth;
- }
-
- static int sun6i_spi_probe(struct platform_device *pdev)
-@@ -608,7 +612,7 @@ static int sun6i_spi_probe(struct platfo
- }
-
- sspi->master = master;
-- sspi->fifo_depth = (unsigned long)of_device_get_match_data(&pdev->dev);
-+ sspi->quirks = of_device_get_match_data(&pdev->dev);
-
- master->max_speed_hz = 100 * 1000 * 1000;
- master->min_speed_hz = 3 * 1000;
-@@ -723,9 +727,17 @@ static int sun6i_spi_remove(struct platf
- return 0;
- }
-
-+static const struct sun6i_spi_quirks sun6i_a31_spi_quirks = {
-+ .fifo_depth = SUN6I_FIFO_DEPTH,
-+};
-+
-+static const struct sun6i_spi_quirks sun8i_h3_spi_quirks = {
-+ .fifo_depth = SUN8I_FIFO_DEPTH,
-+};
-+
- static const struct of_device_id sun6i_spi_match[] = {
-- { .compatible = "allwinner,sun6i-a31-spi", .data = (void *)SUN6I_FIFO_DEPTH },
-- { .compatible = "allwinner,sun8i-h3-spi", .data = (void *)SUN8I_FIFO_DEPTH },
-+ { .compatible = "allwinner,sun6i-a31-spi", .data = &sun6i_a31_spi_quirks },
-+ { .compatible = "allwinner,sun8i-h3-spi", .data = &sun8i_h3_spi_quirks },
- {}
- };
- MODULE_DEVICE_TABLE(of, sun6i_spi_match);
+++ /dev/null
-From ec8dfb455da3822451129257ab21e2f0d03a6ae3 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Fri, 16 Jul 2021 21:46:31 -0500
-Subject: [PATCH 076/117] spi: spi-sun6i: Add Allwinner R329 support
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- drivers/spi/spi-sun6i.c | 78 ++++++++++++++++++++++++++---------------
- 1 file changed, 49 insertions(+), 29 deletions(-)
-
---- a/drivers/spi/spi-sun6i.c
-+++ b/drivers/spi/spi-sun6i.c
-@@ -30,6 +30,7 @@
- #define SUN6I_GBL_CTL_REG 0x04
- #define SUN6I_GBL_CTL_BUS_ENABLE BIT(0)
- #define SUN6I_GBL_CTL_MASTER BIT(1)
-+#define SUN6I_GBL_CTL_SAMPLE_MODE BIT(2)
- #define SUN6I_GBL_CTL_TP BIT(7)
- #define SUN6I_GBL_CTL_RST BIT(31)
-
-@@ -87,6 +88,8 @@
-
- struct sun6i_spi_quirks {
- unsigned long fifo_depth;
-+ bool has_divider : 1;
-+ bool has_new_sample_mode : 1;
- };
-
- struct sun6i_spi {
-@@ -362,38 +365,44 @@ static int sun6i_spi_transfer_one(struct
- sun6i_spi_write(sspi, SUN6I_TFR_CTL_REG, reg);
-
- /* Ensure that we have a parent clock fast enough */
-- mclk_rate = clk_get_rate(sspi->mclk);
-- if (mclk_rate < (2 * tfr->speed_hz)) {
-- clk_set_rate(sspi->mclk, 2 * tfr->speed_hz);
-+ if (sspi->quirks->has_divider) {
- mclk_rate = clk_get_rate(sspi->mclk);
-- }
-+ if (mclk_rate < (2 * tfr->speed_hz)) {
-+ clk_set_rate(sspi->mclk, 2 * tfr->speed_hz);
-+ mclk_rate = clk_get_rate(sspi->mclk);
-+ }
-
-- /*
-- * Setup clock divider.
-- *
-- * We have two choices there. Either we can use the clock
-- * divide rate 1, which is calculated thanks to this formula:
-- * SPI_CLK = MOD_CLK / (2 ^ cdr)
-- * Or we can use CDR2, which is calculated with the formula:
-- * SPI_CLK = MOD_CLK / (2 * (cdr + 1))
-- * Wether we use the former or the latter is set through the
-- * DRS bit.
-- *
-- * First try CDR2, and if we can't reach the expected
-- * frequency, fall back to CDR1.
-- */
-- div_cdr1 = DIV_ROUND_UP(mclk_rate, tfr->speed_hz);
-- div_cdr2 = DIV_ROUND_UP(div_cdr1, 2);
-- if (div_cdr2 <= (SUN6I_CLK_CTL_CDR2_MASK + 1)) {
-- reg = SUN6I_CLK_CTL_CDR2(div_cdr2 - 1) | SUN6I_CLK_CTL_DRS;
-- tfr->effective_speed_hz = mclk_rate / (2 * div_cdr2);
-+ /*
-+ * Setup clock divider.
-+ *
-+ * We have two choices there. Either we can use the clock
-+ * divide rate 1, which is calculated thanks to this formula:
-+ * SPI_CLK = MOD_CLK / (2 ^ cdr)
-+ * Or we can use CDR2, which is calculated with the formula:
-+ * SPI_CLK = MOD_CLK / (2 * (cdr + 1))
-+ * Wether we use the former or the latter is set through the
-+ * DRS bit.
-+ *
-+ * First try CDR2, and if we can't reach the expected
-+ * frequency, fall back to CDR1.
-+ */
-+ div_cdr1 = DIV_ROUND_UP(mclk_rate, tfr->speed_hz);
-+ div_cdr2 = DIV_ROUND_UP(div_cdr1, 2);
-+ if (div_cdr2 <= (SUN6I_CLK_CTL_CDR2_MASK + 1)) {
-+ reg = SUN6I_CLK_CTL_CDR2(div_cdr2 - 1) | SUN6I_CLK_CTL_DRS;
-+ tfr->effective_speed_hz = mclk_rate / (2 * div_cdr2);
-+ } else {
-+ div = min(SUN6I_CLK_CTL_CDR1_MASK, order_base_2(div_cdr1));
-+ reg = SUN6I_CLK_CTL_CDR1(div);
-+ tfr->effective_speed_hz = mclk_rate / (1 << div);
-+ }
-+ sun6i_spi_write(sspi, SUN6I_CLK_CTL_REG, reg);
- } else {
-- div = min(SUN6I_CLK_CTL_CDR1_MASK, order_base_2(div_cdr1));
-- reg = SUN6I_CLK_CTL_CDR1(div);
-- tfr->effective_speed_hz = mclk_rate / (1 << div);
-+ clk_set_rate(sspi->mclk, tfr->speed_hz);
-+ mclk_rate = clk_get_rate(sspi->mclk);
-+ tfr->effective_speed_hz = mclk_rate;
- }
-
-- sun6i_spi_write(sspi, SUN6I_CLK_CTL_REG, reg);
- /* Finally enable the bus - doing so before might raise SCK to HIGH */
- reg = sun6i_spi_read(sspi, SUN6I_GBL_CTL_REG);
- reg |= SUN6I_GBL_CTL_BUS_ENABLE;
-@@ -518,6 +527,7 @@ static int sun6i_spi_runtime_resume(stru
- struct spi_master *master = dev_get_drvdata(dev);
- struct sun6i_spi *sspi = spi_master_get_devdata(master);
- int ret;
-+ u32 reg;
-
- ret = clk_prepare_enable(sspi->hclk);
- if (ret) {
-@@ -537,8 +547,10 @@ static int sun6i_spi_runtime_resume(stru
- goto err2;
- }
-
-- sun6i_spi_write(sspi, SUN6I_GBL_CTL_REG,
-- SUN6I_GBL_CTL_MASTER | SUN6I_GBL_CTL_TP);
-+ reg = SUN6I_GBL_CTL_MASTER | SUN6I_GBL_CTL_TP;
-+ if (sspi->quirks->has_new_sample_mode)
-+ reg |= SUN6I_GBL_CTL_SAMPLE_MODE;
-+ sun6i_spi_write(sspi, SUN6I_GBL_CTL_REG, reg);
-
- return 0;
-
-@@ -729,15 +741,23 @@ static int sun6i_spi_remove(struct platf
-
- static const struct sun6i_spi_quirks sun6i_a31_spi_quirks = {
- .fifo_depth = SUN6I_FIFO_DEPTH,
-+ .has_divider = true,
- };
-
- static const struct sun6i_spi_quirks sun8i_h3_spi_quirks = {
- .fifo_depth = SUN8I_FIFO_DEPTH,
-+ .has_divider = true,
-+};
-+
-+static const struct sun6i_spi_quirks sun50i_r329_spi_quirks = {
-+ .fifo_depth = SUN8I_FIFO_DEPTH,
-+ .has_new_sample_mode = true,
- };
-
- static const struct of_device_id sun6i_spi_match[] = {
- { .compatible = "allwinner,sun6i-a31-spi", .data = &sun6i_a31_spi_quirks },
- { .compatible = "allwinner,sun8i-h3-spi", .data = &sun8i_h3_spi_quirks },
-+ { .compatible = "allwinner,sun50i-r329-spi", .data = &sun50i_r329_spi_quirks },
- {}
- };
- MODULE_DEVICE_TABLE(of, sun6i_spi_match);
+++ /dev/null
-From b300b013de16109f833782d9f4e7ee8cc204780f Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sat, 17 Jul 2021 11:19:29 -0500
-Subject: [PATCH 077/117] spi: spi-sun6i: Dual/Quad RX Support
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- drivers/spi/spi-sun6i.c | 17 +++++++++++++++--
- 1 file changed, 15 insertions(+), 2 deletions(-)
-
---- a/drivers/spi/spi-sun6i.c
-+++ b/drivers/spi/spi-sun6i.c
-@@ -82,6 +82,8 @@
- #define SUN6I_XMIT_CNT_REG 0x34
-
- #define SUN6I_BURST_CTL_CNT_REG 0x38
-+#define SUN6I_BURST_CTL_CNT_QUAD_EN BIT(29)
-+#define SUN6I_BURST_CTL_CNT_DUAL_EN BIT(28)
-
- #define SUN6I_TXDATA_REG 0x200
- #define SUN6I_RXDATA_REG 0x300
-@@ -415,7 +417,17 @@ static int sun6i_spi_transfer_one(struct
- /* Setup the counters */
- sun6i_spi_write(sspi, SUN6I_BURST_CNT_REG, tfr->len);
- sun6i_spi_write(sspi, SUN6I_XMIT_CNT_REG, tx_len);
-- sun6i_spi_write(sspi, SUN6I_BURST_CTL_CNT_REG, tx_len);
-+
-+ reg = tx_len;
-+ switch (tfr->rx_nbits) {
-+ case SPI_NBITS_QUAD:
-+ reg |= SUN6I_BURST_CTL_CNT_QUAD_EN;
-+ break;
-+ case SPI_NBITS_DUAL:
-+ reg |= SUN6I_BURST_CTL_CNT_DUAL_EN;
-+ break;
-+ }
-+ sun6i_spi_write(sspi, SUN6I_BURST_CTL_CNT_REG, reg);
-
- if (!use_dma) {
- /* Fill the TX FIFO */
-@@ -632,7 +644,8 @@ static int sun6i_spi_probe(struct platfo
- master->set_cs = sun6i_spi_set_cs;
- master->transfer_one = sun6i_spi_transfer_one;
- master->num_chipselect = 4;
-- master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST;
-+ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST
-+ | SPI_RX_DUAL | SPI_RX_QUAD;
- master->bits_per_word_mask = SPI_BPW_MASK(8);
- master->dev.of_node = pdev->dev.of_node;
- master->auto_runtime_pm = true;
+++ /dev/null
-From aaabd3cf8c041b5122ca252f51fa616833e18749 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Thu, 11 Aug 2022 00:54:01 -0500
-Subject: [PATCH 078/117] riscv: dts: allwinner: Add SPI support
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- .../dts/allwinner/sun20i-d1-lichee-rv.dts | 6 +++
- .../boot/dts/allwinner/sun20i-d1-nezha.dts | 44 ++++++++++++++++
- arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi | 51 +++++++++++++++++++
- 3 files changed, 101 insertions(+)
-
---- a/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv.dts
-+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv.dts
-@@ -65,6 +65,12 @@
- status = "okay";
- };
-
-+&spi0 {
-+ pinctrl-0 = <&spi0_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+};
-+
- &uart0 {
- pinctrl-0 = <&uart0_pb8_pins>;
- pinctrl-names = "default";
---- a/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
-+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
-@@ -19,6 +19,7 @@
- ethernet1 = &xr829;
- mmc0 = &mmc0;
- serial0 = &uart0;
-+ spi0 = &spi0;
- };
-
- chosen {
-@@ -157,6 +158,49 @@
- pinctrl-names = "default";
- status = "okay";
- };
-+
-+&spi0 {
-+ pinctrl-0 = <&spi0_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+
-+ flash@0 {
-+ compatible = "spi-nand";
-+ reg = <0>;
-+
-+ partitions {
-+ compatible = "fixed-partitions";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ partition@0 {
-+ label = "boot0";
-+ reg = <0x00000000 0x00100000>;
-+ };
-+
-+ partition@100000 {
-+ label = "uboot";
-+ reg = <0x00100000 0x00300000>;
-+ };
-+
-+ partition@400000 {
-+ label = "secure_storage";
-+ reg = <0x00400000 0x00100000>;
-+ };
-+
-+ partition@500000 {
-+ label = "sys";
-+ reg = <0x00500000 0x0fb00000>;
-+ };
-+ };
-+ };
-+};
-+
-+&spi1 {
-+ pinctrl-0 = <&spi1_pd_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+};
-
- &uart0 {
- pinctrl-0 = <&uart0_pb8_pins>;
---- a/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
-+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
-@@ -179,6 +179,24 @@
- };
-
- /omit-if-no-ref/
-+ spi0_pins: spi0-pins {
-+ pins = "PC2", "PC3", "PC4", "PC5", "PC6", "PC7";
-+ function = "spi0";
-+ };
-+
-+ /omit-if-no-ref/
-+ spi1_pb_pins: spi1-pb-pins {
-+ pins = "PB0", "PB8", "PB9", "PB10", "PB11", "PB12";
-+ function = "spi1";
-+ };
-+
-+ /omit-if-no-ref/
-+ spi1_pd_pins: spi1-pd-pins {
-+ pins = "PD10", "PD11", "PD12", "PD13", "PD14", "PD15";
-+ function = "spi1";
-+ };
-+
-+ /omit-if-no-ref/
- uart0_pb8_pins: uart0-pb8-pins {
- pins = "PB8", "PB9";
- function = "uart0";
-@@ -631,6 +649,39 @@
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
-+ };
-+
-+ spi0: spi@4025000 {
-+ compatible = "allwinner,sun20i-d1-spi",
-+ "allwinner,sun50i-r329-spi";
-+ reg = <0x4025000 0x1000>;
-+ interrupts = <31 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
-+ clock-names = "ahb", "mod";
-+ resets = <&ccu RST_BUS_SPI0>;
-+ dmas = <&dma 22>, <&dma 22>;
-+ dma-names = "rx", "tx";
-+ num-cs = <1>;
-+ status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+
-+ spi1: spi@4026000 {
-+ compatible = "allwinner,sun20i-d1-spi-dbi",
-+ "allwinner,sun50i-r329-spi-dbi",
-+ "allwinner,sun50i-r329-spi";
-+ reg = <0x4026000 0x1000>;
-+ interrupts = <32 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
-+ clock-names = "ahb", "mod";
-+ resets = <&ccu RST_BUS_SPI1>;
-+ dmas = <&dma 23>, <&dma 23>;
-+ dma-names = "rx", "tx";
-+ num-cs = <1>;
-+ status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
- };
-
- usb_otg: usb@4100000 {
+++ /dev/null
-From 68c6f452bf42d6c5cbaf40537d8a17a7f3f5481e Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 6 Jun 2021 10:03:12 -0500
-Subject: [PATCH 079/117] dt-bindings: thermal: sun8i: Add compatible for D1
-
-D1 contains a thermal sensor similar to other Allwinner SoCs. Like the
-H3 variant, it contains only one channel.
-
-D1's thermal sensor gets a reference voltage from AVCC. This may always
-have been the case; it is explicitly documented in the SoC user manuals
-since at least H616. However, it was not as important on earlier SoCs,
-because those reference designs foreced AVCC always-on by connecting it
-to the PLL power supply.
-
-Now, since D1 only uses AVCC for other optional peripherals, this supply
-could be turned off at runtime, so it must be made explicit in the DTS.
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- .../thermal/allwinner,sun8i-a83t-ths.yaml | 21 ++++++++++++++++++-
- 1 file changed, 20 insertions(+), 1 deletion(-)
-
---- a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
-+++ b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
-@@ -16,6 +16,7 @@ properties:
- - allwinner,sun8i-a83t-ths
- - allwinner,sun8i-h3-ths
- - allwinner,sun8i-r40-ths
-+ - allwinner,sun20i-d1-ths
- - allwinner,sun50i-a64-ths
- - allwinner,sun50i-a100-ths
- - allwinner,sun50i-h5-ths
-@@ -55,6 +56,10 @@ properties:
- - 0
- - 1
-
-+ vref-supply:
-+ description:
-+ Regulator for the analog reference voltage
-+
- allOf:
- - if:
- properties:
-@@ -84,7 +89,9 @@ allOf:
- properties:
- compatible:
- contains:
-- const: allwinner,sun8i-h3-ths
-+ enum:
-+ - allwinner,sun8i-h3-ths
-+ - allwinner,sun20i-d1-ths
-
- then:
- properties:
-@@ -103,6 +110,7 @@ allOf:
- enum:
- - allwinner,sun8i-h3-ths
- - allwinner,sun8i-r40-ths
-+ - allwinner,sun20i-d1-ths
- - allwinner,sun50i-a64-ths
- - allwinner,sun50i-a100-ths
- - allwinner,sun50i-h5-ths
-@@ -114,6 +122,17 @@ allOf:
- - clock-names
- - resets
-
-+ - if:
-+ properties:
-+ compatible:
-+ contains:
-+ enum:
-+ - allwinner,sun20i-d1-ths
-+
-+ then:
-+ required:
-+ - vref-supply
-+
- required:
- - compatible
- - reg
+++ /dev/null
-From c225b48d2cf5f5a824b5b0a4144511bdc5f65ab5 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 14 Aug 2022 11:18:11 -0500
-Subject: [PATCH 080/117] riscv: dts: allwinner: d1: Add thermal sensor and
- zone
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- .../sun20i-d1-common-regulators.dtsi | 4 ++
- arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi | 41 +++++++++++++++++++
- 2 files changed, 45 insertions(+)
-
---- a/arch/riscv/boot/dts/allwinner/sun20i-d1-common-regulators.dtsi
-+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-common-regulators.dtsi
-@@ -49,3 +49,7 @@
- regulator-max-microvolt = <1800000>;
- ldo-in-supply = <®_vcc_3v3>;
- };
-+
-+&ths {
-+ vref-supply = <®_aldo>;
-+};
---- a/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
-+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
-@@ -59,6 +59,35 @@
- #clock-cells = <0>;
- };
-
-+ thermal-zones {
-+ cpu-thermal {
-+ polling-delay = <0>;
-+ polling-delay-passive = <0>;
-+ thermal-sensors = <&ths>;
-+
-+ trips {
-+ cpu_target: cpu-target {
-+ hysteresis = <3000>;
-+ temperature = <85000>;
-+ type = "passive";
-+ };
-+
-+ cpu-crit {
-+ hysteresis = <0>;
-+ temperature = <110000>;
-+ type = "critical";
-+ };
-+ };
-+
-+ cooling-maps {
-+ map0 {
-+ trip = <&cpu_target>;
-+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-+ };
-+ };
-+ };
-+ };
-+
- soc {
- compatible = "simple-bus";
- ranges;
-@@ -252,6 +281,18 @@
- #size-cells = <0>;
- };
-
-+ ths: temperature-sensor@2009400 {
-+ compatible = "allwinner,sun20i-d1-ths";
-+ reg = <0x2009400 0x400>;
-+ interrupts = <74 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_THS>, <&osc24M>;
-+ clock-names = "bus", "mod";
-+ resets = <&ccu RST_BUS_THS>;
-+ nvmem-cells = <&ths_calib>;
-+ nvmem-cell-names = "calibration";
-+ #thermal-sensor-cells = <0>;
-+ };
-+
- lradc: keys@2009800 {
- compatible = "allwinner,sun20i-d1-lradc",
- "allwinner,sun50i-r329-lradc";
+++ /dev/null
-From 9b6a07cacab9300c261b1f7e25857f96cfeae9cf Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sat, 12 Jun 2021 23:42:48 -0500
-Subject: [PATCH 081/117] ASoC: sun20i-codec: New driver for D1 internal codec
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- sound/soc/sunxi/Kconfig | 6 +
- sound/soc/sunxi/Makefile | 1 +
- sound/soc/sunxi/sun20i-codec.c | 886 +++++++++++++++++++++++++++++++++
- 3 files changed, 893 insertions(+)
- create mode 100644 sound/soc/sunxi/sun20i-codec.c
-
---- a/sound/soc/sunxi/Kconfig
-+++ b/sound/soc/sunxi/Kconfig
-@@ -30,6 +30,12 @@ config SND_SUN8I_CODEC_ANALOG
- Say Y or M if you want to add support for the analog controls for
- the codec embedded in newer Allwinner SoCs.
-
-+config SND_SUN20I_CODEC
-+ tristate "Allwinner D1 (sun20i) Audio Codec"
-+ depends on ARCH_SUNXI || COMPILE_TEST
-+ help
-+ Say Y or M to add support for the audio codec in Allwinner D1 SoC.
-+
- config SND_SUN50I_CODEC_ANALOG
- tristate "Allwinner sun50i Codec Analog Controls Support"
- depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
---- a/sound/soc/sunxi/Makefile
-+++ b/sound/soc/sunxi/Makefile
-@@ -3,6 +3,7 @@ obj-$(CONFIG_SND_SUN4I_CODEC) += sun4i-c
- obj-$(CONFIG_SND_SUN4I_I2S) += sun4i-i2s.o
- obj-$(CONFIG_SND_SUN4I_SPDIF) += sun4i-spdif.o
- obj-$(CONFIG_SND_SUN8I_CODEC_ANALOG) += sun8i-codec-analog.o
-+obj-$(CONFIG_SND_SUN20I_CODEC) += sun20i-codec.o
- obj-$(CONFIG_SND_SUN50I_CODEC_ANALOG) += sun50i-codec-analog.o
- obj-$(CONFIG_SND_SUN8I_CODEC) += sun8i-codec.o
- obj-$(CONFIG_SND_SUN8I_ADDA_PR_REGMAP) += sun8i-adda-pr-regmap.o
---- /dev/null
-+++ b/sound/soc/sunxi/sun20i-codec.c
-@@ -0,0 +1,886 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+
-+#include <linux/clk.h>
-+#include <linux/io.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+#include <linux/regmap.h>
-+#include <linux/reset.h>
-+
-+#include <sound/dmaengine_pcm.h>
-+#include <sound/pcm_params.h>
-+#include <sound/simple_card_utils.h>
-+#include <sound/soc.h>
-+#include <sound/soc-dai.h>
-+#include <sound/soc-dapm.h>
-+#include <sound/tlv.h>
-+
-+#define SUN20I_CODEC_DAC_DPC 0x0000
-+#define SUN20I_CODEC_DAC_DPC_EN_DA 31
-+#define SUN20I_CODEC_DAC_DPC_HPF_EN 18
-+#define SUN20I_CODEC_DAC_DPC_DVOL 12
-+#define SUN20I_CODEC_DAC_VOL_CTRL 0x0004
-+#define SUN20I_CODEC_DAC_VOL_CTRL_DAC_VOL_SEL 16
-+#define SUN20I_CODEC_DAC_VOL_CTRL_DAC_VOL_L 8
-+#define SUN20I_CODEC_DAC_VOL_CTRL_DAC_VOL_R 0
-+#define SUN20I_CODEC_DAC_FIFOC 0x0010
-+#define SUN20I_CODEC_DAC_FIFOC_FS 29
-+#define SUN20I_CODEC_DAC_FIFOC_FIFO_MODE 24
-+#define SUN20I_CODEC_DAC_FIFOC_DRQ_CLR_CNT 21
-+#define SUN20I_CODEC_DAC_FIFOC_TRIG_LEVEL 8
-+#define SUN20I_CODEC_DAC_FIFOC_MONO_EN 6
-+#define SUN20I_CODEC_DAC_FIFOC_SAMPLE_BITS 5
-+#define SUN20I_CODEC_DAC_FIFOC_DRQ_EN 4
-+#define SUN20I_CODEC_DAC_FIFOC_FIFO_FLUSH 0
-+#define SUN20I_CODEC_DAC_TXDATA 0x0020
-+#define SUN20I_CODEC_DAC_DEBUG 0x0028
-+#define SUN20I_CODEC_DAC_DEBUG_DA_SWP 6
-+#define SUN20I_CODEC_DAC_ADDA_LOOP_MODE 0
-+
-+#define SUN20I_CODEC_ADC_FIFOC 0x0030
-+#define SUN20I_CODEC_ADC_FIFOC_FS 29
-+#define SUN20I_CODEC_ADC_FIFOC_EN_AD 28
-+#define SUN20I_CODEC_ADC_FIFOC_FIFO_MODE 24
-+#define SUN20I_CODEC_ADC_FIFOC_SAMPLE_BITS 16
-+#define SUN20I_CODEC_ADC_FIFOC_TRIG_LEVEL 4
-+#define SUN20I_CODEC_ADC_FIFOC_DRQ_EN 3
-+#define SUN20I_CODEC_ADC_FIFOC_FIFO_FLUSH 0
-+#define SUN20I_CODEC_ADC_VOL_CTRL 0x0034
-+#define SUN20I_CODEC_ADC_VOL_CTRL_ADC3_VOL 16
-+#define SUN20I_CODEC_ADC_VOL_CTRL_ADC2_VOL 8
-+#define SUN20I_CODEC_ADC_VOL_CTRL_ADC1_VOL 0
-+#define SUN20I_CODEC_ADC_RXDATA 0x0040
-+#define SUN20I_CODEC_ADC_DEBUG 0x004c
-+#define SUN20I_CODEC_ADC_DEBUG_AD_SWP1 24
-+#define SUN20I_CODEC_ADC_DIG_CTRL 0x0050
-+#define SUN20I_CODEC_ADC_DIG_CTRL_ADC_VOL_EN 16
-+#define SUN20I_CODEC_ADC_DIG_CTRL_ADC_EN 0
-+
-+#define SUN20I_CODEC_DAC_DAP_CTRL 0x00f0
-+#define SUN20I_CODEC_DAC_DAP_CTRL_DAP_EN 31
-+#define SUN20I_CODEC_DAC_DAP_CTRL_DAP_DRC_EN 29
-+#define SUN20I_CODEC_DAC_DAP_CTRL_DAP_HPF_EN 28
-+
-+#define SUN20I_CODEC_ADC_DAP_CTRL 0x00f8
-+#define SUN20I_CODEC_ADC_DAP_CTRL_DAP0_EN 31
-+#define SUN20I_CODEC_ADC_DAP_CTRL_DAP0_DRC_EN 29
-+#define SUN20I_CODEC_ADC_DAP_CTRL_DAP0_HPF_EN 28
-+#define SUN20I_CODEC_ADC_DAP_CTRL_DAP1_EN 27
-+#define SUN20I_CODEC_ADC_DAP_CTRL_DAP1_DRC_EN 25
-+#define SUN20I_CODEC_ADC_DAP_CTRL_DAP1_HPF_EN 24
-+
-+#define SUN20I_CODEC_ADC1 0x0300
-+#define SUN20I_CODEC_ADC1_ADC1_EN 31
-+#define SUN20I_CODEC_ADC1_MICIN1_PGA_EN 30
-+#define SUN20I_CODEC_ADC1_ADC1_DITHER_EN 29
-+#define SUN20I_CODEC_ADC1_MICIN1_SIN_EN 28
-+#define SUN20I_CODEC_ADC1_FMINL_EN 27
-+#define SUN20I_CODEC_ADC1_FMINL_GAIN 26
-+#define SUN20I_CODEC_ADC1_DITHER_LEVEL 24
-+#define SUN20I_CODEC_ADC1_LINEINL_EN 23
-+#define SUN20I_CODEC_ADC1_LINEINL_GAIN 22
-+#define SUN20I_CODEC_ADC1_ADC1_PGA_GAIN 8
-+#define SUN20I_CODEC_ADC2 0x0304
-+#define SUN20I_CODEC_ADC2_ADC2_EN 31
-+#define SUN20I_CODEC_ADC2_MICIN2_PGA_EN 30
-+#define SUN20I_CODEC_ADC2_ADC2_DITHER_EN 29
-+#define SUN20I_CODEC_ADC2_MICIN2_SIN_EN 28
-+#define SUN20I_CODEC_ADC2_FMINR_EN 27
-+#define SUN20I_CODEC_ADC2_FMINR_GAIN 26
-+#define SUN20I_CODEC_ADC2_DITHER_LEVEL 24
-+#define SUN20I_CODEC_ADC2_LINEINR_EN 23
-+#define SUN20I_CODEC_ADC2_LINEINR_GAIN 22
-+#define SUN20I_CODEC_ADC2_ADC2_PGA_GAIN 8
-+#define SUN20I_CODEC_ADC3 0x0308
-+#define SUN20I_CODEC_ADC3_ADC3_EN 31
-+#define SUN20I_CODEC_ADC3_MICIN3_PGA_EN 30
-+#define SUN20I_CODEC_ADC3_ADC3_DITHER_EN 29
-+#define SUN20I_CODEC_ADC3_MICIN3_SIN_EN 28
-+#define SUN20I_CODEC_ADC3_DITHER_LEVEL 24
-+#define SUN20I_CODEC_ADC3_ADC3_PGA_GAIN 8
-+
-+#define SUN20I_CODEC_DAC 0x0310
-+#define SUN20I_CODEC_DAC_DACL_EN 15
-+#define SUN20I_CODEC_DAC_DACR_EN 14
-+#define SUN20I_CODEC_DAC_LINEOUTL_EN 13
-+#define SUN20I_CODEC_DAC_LMUTE 12
-+#define SUN20I_CODEC_DAC_LINEOUTR_EN 11
-+#define SUN20I_CODEC_DAC_RMUTE 10
-+#define SUN20I_CODEC_DAC_LINEOUTL_DIFFEN 6
-+#define SUN20I_CODEC_DAC_LINEOUTR_DIFFEN 5
-+#define SUN20I_CODEC_DAC_LINEOUT_VOL_CTRL 0
-+
-+#define SUN20I_CODEC_MICBIAS 0x0318
-+#define SUN20I_CODEC_MICBIAS_SELDETADCFS 28
-+#define SUN20I_CODEC_MICBIAS_SELDETADCDB 26
-+#define SUN20I_CODEC_MICBIAS_SELDETADCBF 24
-+#define SUN20I_CODEC_MICBIAS_JACKDETEN 23
-+#define SUN20I_CODEC_MICBIAS_SELDETADCDY 21
-+#define SUN20I_CODEC_MICBIAS_MICADCEN 20
-+#define SUN20I_CODEC_MICBIAS_POPFREE 19
-+#define SUN20I_CODEC_MICBIAS_DET_MODE 18
-+#define SUN20I_CODEC_MICBIAS_AUTOPLEN 17
-+#define SUN20I_CODEC_MICBIAS_MICDETPL 16
-+#define SUN20I_CODEC_MICBIAS_HMICBIASEN 15
-+#define SUN20I_CODEC_MICBIAS_HMICBIASSEL 13
-+#define SUN20I_CODEC_MICBIAS_HMIC_CHOPPER_EN 12
-+#define SUN20I_CODEC_MICBIAS_HMIC_CHOPPER_CLK 10
-+#define SUN20I_CODEC_MICBIAS_MMICBIASEN 7
-+#define SUN20I_CODEC_MICBIAS_MMICBIASSEL 5
-+#define SUN20I_CODEC_MICBIAS_MMIC_CHOPPER_EN 4
-+#define SUN20I_CODEC_MICBIAS_MMIC_CHOPPER_CLK 2
-+
-+/* TODO */
-+#define SUN20I_CODEC_RAMP 0x031c
-+#define SUN20I_CODEC_RAMP_HP_PULL_OUT_EN 15
-+
-+#define SUN20I_CODEC_HMIC_CTRL 0x0328
-+#define SUN20I_CODEC_HMIC_CTRL_SAMPLE_SELECT 21
-+#define SUN20I_CODEC_HMIC_CTRL_MDATA_THRESHOLD 16
-+#define SUN20I_CODEC_HMIC_CTRL_SF 14
-+#define SUN20I_CODEC_HMIC_CTRL_M 10
-+#define SUN20I_CODEC_HMIC_CTRL_N 6
-+#define SUN20I_CODEC_HMIC_CTRL_THRESH_DEBOUNCE 3
-+#define SUN20I_CODEC_HMIC_CTRL_JACK_OUT_IRQ_EN 2
-+#define SUN20I_CODEC_HMIC_CTRL_JACK_IN_IRQ_EN 1
-+#define SUN20I_CODEC_HMIC_CTRL_MIC_DET_IRQ_EN 0
-+#define SUN20I_CODEC_HMIC_STS 0x032c
-+#define SUN20I_CODEC_HMIC_STS_MDATA_DISCARD 13
-+#define SUN20I_CODEC_HMIC_STS_HMIC_DATA 8
-+#define SUN20I_CODEC_HMIC_STS_JACK_OUT_IRQ 4
-+#define SUN20I_CODEC_HMIC_STS_JACK_IN_IRQ 3
-+#define SUN20I_CODEC_HMIC_STS_MIC_DET_IRQ 0
-+
-+#define SUN20I_CODEC_HP2 0x0340
-+#define SUN20I_CODEC_HP2_HPFB_BUF_EN 31
-+#define SUN20I_CODEC_HP2_HEADPHONE_GAIN 28
-+#define SUN20I_CODEC_HP2_HPFB_RES 26
-+#define SUN20I_CODEC_HP2_HP_DRVEN 21
-+#define SUN20I_CODEC_HP2_HP_DRVOUTEN 20
-+#define SUN20I_CODEC_HP2_RSWITCH 19
-+#define SUN20I_CODEC_HP2_RAMPEN 18
-+#define SUN20I_CODEC_HP2_HPFB_IN_EN 17
-+#define SUN20I_CODEC_HP2_RAMP_FINAL_CONTROL 16
-+#define SUN20I_CODEC_HP2_RAMP_OUT_EN 15
-+#define SUN20I_CODEC_HP2_RAMP_FINAL_STATE_RES 13
-+
-+/* Not affected by codec bus clock/reset */
-+#define SUN20I_CODEC_POWER 0x0348
-+#define SUN20I_CODEC_POWER_ALDO_EN_MASK BIT(31)
-+#define SUN20I_CODEC_POWER_HPLDO_EN_MASK BIT(30)
-+#define SUN20I_CODEC_POWER_ALDO_VOLTAGE_MASK GENMASK(14, 12)
-+#define SUN20I_CODEC_POWER_HPLDO_VOLTAGE_MASK GENMASK(10, 8)
-+
-+#define SUN20I_CODEC_ADC_CUR 0x034c
-+
-+#define SUN20I_CODEC_PCM_FORMATS (SNDRV_PCM_FMTBIT_S16_LE|\
-+ SNDRV_PCM_FMTBIT_S20_LE|\
-+ SNDRV_PCM_FMTBIT_S32_LE)
-+
-+#define DRIVER_NAME "sun20i-codec"
-+
-+/* snd_soc_register_card() takes over drvdata, so the card must be first! */
-+struct sun20i_codec {
-+ struct snd_soc_card card;
-+ struct snd_soc_dai_link dai_link;
-+ struct snd_soc_dai_link_component dlcs[3];
-+ struct snd_dmaengine_dai_dma_data dma_data[2];
-+
-+ struct clk *bus_clk;
-+ struct clk *adc_clk;
-+ struct clk *dac_clk;
-+ struct reset_control *reset;
-+};
-+
-+static int sun20i_codec_dai_probe(struct snd_soc_dai *dai)
-+{
-+ struct sun20i_codec *codec = snd_soc_dai_get_drvdata(dai);
-+
-+ snd_soc_dai_init_dma_data(dai,
-+ &codec->dma_data[SNDRV_PCM_STREAM_PLAYBACK],
-+ &codec->dma_data[SNDRV_PCM_STREAM_CAPTURE]);
-+
-+ return 0;
-+}
-+
-+static struct clk *sun20i_codec_get_clk(struct snd_pcm_substream *substream,
-+ struct snd_soc_dai *dai)
-+{
-+ struct sun20i_codec *codec = snd_soc_dai_get_drvdata(dai);
-+
-+ return substream->stream == SNDRV_PCM_STREAM_CAPTURE ?
-+ codec->adc_clk : codec->dac_clk;
-+}
-+
-+static const unsigned int sun20i_codec_rates[] = {
-+ 7350, 8000, 11025, 12000, 14700, 16000, 22050, 24000,
-+ 29400, 32000, 44100, 48000, 88200, 96000, 176400, 192000,
-+};
-+
-+static const struct snd_pcm_hw_constraint_list sun20i_codec_rate_lists[] = {
-+ [SNDRV_PCM_STREAM_PLAYBACK] = {
-+ .list = sun20i_codec_rates,
-+ .count = ARRAY_SIZE(sun20i_codec_rates),
-+ },
-+ [SNDRV_PCM_STREAM_CAPTURE] = {
-+ .list = sun20i_codec_rates,
-+ .count = ARRAY_SIZE(sun20i_codec_rates) - 4, /* max 48 kHz */
-+ },
-+};
-+
-+static int sun20i_codec_startup(struct snd_pcm_substream *substream,
-+ struct snd_soc_dai *dai)
-+{
-+ const struct snd_pcm_hw_constraint_list *list;
-+ int ret;
-+
-+ list = &sun20i_codec_rate_lists[substream->stream];
-+ ret = snd_pcm_hw_constraint_list(substream->runtime, 0,
-+ SNDRV_PCM_HW_PARAM_RATE, list);
-+ if (ret)
-+ return ret;
-+
-+ ret = clk_prepare_enable(sun20i_codec_get_clk(substream, dai));
-+ if (ret)
-+ return ret;
-+
-+ return 0;
-+}
-+
-+static void sun20i_codec_shutdown(struct snd_pcm_substream *substream,
-+ struct snd_soc_dai *dai)
-+{
-+ clk_disable_unprepare(sun20i_codec_get_clk(substream, dai));
-+}
-+
-+static unsigned int sun20i_codec_get_clk_rate(unsigned int sample_rate)
-+{
-+ return (sample_rate % 4000) ? 22579200 : 24576000;
-+}
-+
-+static const unsigned short sun20i_codec_divisors[] = {
-+ 512, 1024, 2048, 128,
-+ 768, 1536, 3072, 256,
-+};
-+
-+static int sun20i_codec_get_fs(unsigned int clk_rate, unsigned int sample_rate)
-+{
-+ unsigned int divisor = clk_rate / sample_rate;
-+ int i;
-+
-+ for (i = 0; i < ARRAY_SIZE(sun20i_codec_divisors); ++i)
-+ if (sun20i_codec_divisors[i] == divisor)
-+ return i;
-+
-+ return -EINVAL;
-+}
-+
-+static int sun20i_codec_hw_params(struct snd_pcm_substream *substream,
-+ struct snd_pcm_hw_params *params,
-+ struct snd_soc_dai *dai)
-+{
-+ struct sun20i_codec *codec = snd_soc_dai_get_drvdata(dai);
-+ struct snd_soc_component *component = dai->component;
-+ unsigned int channels = params_channels(params);
-+ unsigned int sample_bits = params_width(params);
-+ unsigned int sample_rate = params_rate(params);
-+ unsigned int clk_rate = sun20i_codec_get_clk_rate(sample_rate);
-+ enum dma_slave_buswidth dma_width;
-+ unsigned int reg;
-+ int ret, val;
-+
-+ switch (params_physical_width(params)) {
-+ case 16:
-+ dma_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
-+ break;
-+ case 32:
-+ dma_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
-+ break;
-+ default:
-+ dev_err(dai->dev, "Unsupported physical sample width: %d\n",
-+ params_physical_width(params));
-+ return -EINVAL;
-+ }
-+ codec->dma_data[substream->stream].addr_width = dma_width;
-+
-+ ret = clk_set_rate(sun20i_codec_get_clk(substream, dai),
-+ sun20i_codec_get_clk_rate(sample_rate));
-+ if (ret)
-+ return ret;
-+
-+ reg = substream->stream == SNDRV_PCM_STREAM_CAPTURE ?
-+ SUN20I_CODEC_ADC_FIFOC : SUN20I_CODEC_DAC_FIFOC;
-+
-+ val = sun20i_codec_get_fs(clk_rate, sample_rate);
-+ if (val < 0)
-+ return val;
-+ snd_soc_component_update_bits(component, reg,
-+ 0x7 << SUN20I_CODEC_DAC_FIFOC_FS,
-+ val << SUN20I_CODEC_DAC_FIFOC_FS);
-+
-+ /* Data is at MSB for full 4-byte samples, otherwise at LSB. */
-+ val = sample_bits != 32;
-+ snd_soc_component_update_bits(component, reg,
-+ 0x1 << SUN20I_CODEC_DAC_FIFOC_FIFO_MODE,
-+ val << SUN20I_CODEC_DAC_FIFOC_FIFO_MODE);
-+
-+ if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
-+ val = sample_bits > 16;
-+ snd_soc_component_update_bits(component, reg,
-+ 0x1 << SUN20I_CODEC_ADC_FIFOC_SAMPLE_BITS,
-+ val << SUN20I_CODEC_ADC_FIFOC_SAMPLE_BITS);
-+
-+ val = BIT(channels) - 1;
-+ snd_soc_component_update_bits(component, SUN20I_CODEC_ADC_DIG_CTRL,
-+ 0xf << SUN20I_CODEC_ADC_DIG_CTRL_ADC_EN,
-+ val << SUN20I_CODEC_ADC_DIG_CTRL_ADC_EN);
-+ } else {
-+ val = sample_bits > 16;
-+ snd_soc_component_update_bits(component, reg,
-+ 0x1 << SUN20I_CODEC_DAC_FIFOC_SAMPLE_BITS,
-+ val << SUN20I_CODEC_DAC_FIFOC_SAMPLE_BITS);
-+
-+ val = channels == 1;
-+ snd_soc_component_update_bits(component, reg,
-+ 0x1 << SUN20I_CODEC_DAC_FIFOC_MONO_EN,
-+ val << SUN20I_CODEC_DAC_FIFOC_MONO_EN);
-+ }
-+
-+ return 0;
-+}
-+
-+static int sun20i_codec_trigger(struct snd_pcm_substream *substream, int cmd,
-+ struct snd_soc_dai *dai)
-+{
-+ struct snd_soc_component *component = dai->component;
-+ unsigned int reg, mask;
-+
-+ if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
-+ reg = SUN20I_CODEC_ADC_FIFOC;
-+ mask = BIT(SUN20I_CODEC_ADC_FIFOC_DRQ_EN);
-+ } else {
-+ reg = SUN20I_CODEC_DAC_FIFOC;
-+ mask = BIT(SUN20I_CODEC_DAC_FIFOC_DRQ_EN);
-+ }
-+
-+ switch (cmd) {
-+ case SNDRV_PCM_TRIGGER_START:
-+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-+ case SNDRV_PCM_TRIGGER_RESUME:
-+ mask |= BIT(SUN20I_CODEC_DAC_FIFOC_FIFO_FLUSH);
-+ snd_soc_component_update_bits(component, reg, mask, mask);
-+ break;
-+ case SNDRV_PCM_TRIGGER_STOP:
-+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
-+ case SNDRV_PCM_TRIGGER_SUSPEND:
-+ snd_soc_component_update_bits(component, reg, mask, 0);
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+static const struct snd_soc_dai_ops sun20i_codec_dai_ops = {
-+ .startup = sun20i_codec_startup,
-+ .shutdown = sun20i_codec_shutdown,
-+ .hw_params = sun20i_codec_hw_params,
-+ .trigger = sun20i_codec_trigger,
-+};
-+
-+static struct snd_soc_dai_driver sun20i_codec_dai = {
-+ .name = DRIVER_NAME,
-+ .probe = sun20i_codec_dai_probe,
-+ .ops = &sun20i_codec_dai_ops,
-+ .capture = {
-+ .stream_name = "Capture",
-+ .channels_min = 1,
-+ .channels_max = 3, /* ??? */
-+ .rates = SNDRV_PCM_RATE_CONTINUOUS,
-+ .formats = SUN20I_CODEC_PCM_FORMATS,
-+ .sig_bits = 20,
-+ },
-+ .playback = {
-+ .stream_name = "Playback",
-+ .channels_min = 1,
-+ .channels_max = 2,
-+ .rates = SNDRV_PCM_RATE_CONTINUOUS,
-+ .formats = SUN20I_CODEC_PCM_FORMATS,
-+ .sig_bits = 20,
-+ },
-+};
-+
-+static const DECLARE_TLV_DB_SCALE(sun20i_codec_boost_vol_scale, 0, 600, 0);
-+static const DECLARE_TLV_DB_SCALE(sun20i_codec_digital_vol_scale, -12000, 75, 1);
-+static const DECLARE_TLV_DB_SCALE(sun20i_codec_headphone_vol_scale, -4200, 600, 0);
-+/* FIXME */
-+static const DECLARE_TLV_DB_SCALE(sun20i_codec_line_out_vol_scale, -4650, 150, 1);
-+/* FIXME */
-+static const DECLARE_TLV_DB_SCALE(sun20i_codec_pga_vol_scale, 500, 100, 0);
-+
-+static const char *const sun20i_codec_line_out_mode_enum_text[] = {
-+ "Single-Ended", "Differential"
-+};
-+
-+static const SOC_ENUM_DOUBLE_DECL(sun20i_codec_line_out_mode_enum,
-+ SUN20I_CODEC_DAC,
-+ SUN20I_CODEC_DAC_LINEOUTL_DIFFEN,
-+ SUN20I_CODEC_DAC_LINEOUTR_DIFFEN,
-+ sun20i_codec_line_out_mode_enum_text);
-+
-+static const struct snd_kcontrol_new sun20i_codec_controls[] = {
-+ /* Digital Controls */
-+ SOC_DOUBLE_TLV("DAC Playback Volume",
-+ SUN20I_CODEC_DAC_VOL_CTRL,
-+ SUN20I_CODEC_DAC_VOL_CTRL_DAC_VOL_L,
-+ SUN20I_CODEC_DAC_VOL_CTRL_DAC_VOL_R,
-+ 0xc0, 0, sun20i_codec_digital_vol_scale),
-+ SOC_SINGLE_TLV("ADC3 Capture Volume",
-+ SUN20I_CODEC_ADC_VOL_CTRL,
-+ SUN20I_CODEC_ADC_VOL_CTRL_ADC3_VOL,
-+ 0xc0, 0, sun20i_codec_digital_vol_scale),
-+ SOC_SINGLE_TLV("ADC2 Capture Volume",
-+ SUN20I_CODEC_ADC_VOL_CTRL,
-+ SUN20I_CODEC_ADC_VOL_CTRL_ADC2_VOL,
-+ 0xc0, 0, sun20i_codec_digital_vol_scale),
-+ SOC_SINGLE_TLV("ADC1 Capture Volume",
-+ SUN20I_CODEC_ADC_VOL_CTRL,
-+ SUN20I_CODEC_ADC_VOL_CTRL_ADC1_VOL,
-+ 0xc0, 0, sun20i_codec_digital_vol_scale),
-+
-+ /* Analog Controls */
-+ SOC_DOUBLE_R_TLV("FM Capture Volume",
-+ SUN20I_CODEC_ADC1,
-+ SUN20I_CODEC_ADC2,
-+ SUN20I_CODEC_ADC1_FMINL_GAIN,
-+ 0x1, 0, sun20i_codec_boost_vol_scale),
-+ SOC_DOUBLE_R_TLV("Line In Capture Volume",
-+ SUN20I_CODEC_ADC1,
-+ SUN20I_CODEC_ADC2,
-+ SUN20I_CODEC_ADC1_LINEINL_GAIN,
-+ 0x1, 0, sun20i_codec_boost_vol_scale),
-+ SOC_ENUM("Line Out Mode Playback Enum",
-+ sun20i_codec_line_out_mode_enum),
-+ SOC_SINGLE_TLV("Line Out Playback Volume",
-+ SUN20I_CODEC_DAC,
-+ SUN20I_CODEC_DAC_LINEOUT_VOL_CTRL,
-+ 0x1f, 0, sun20i_codec_line_out_vol_scale),
-+ SOC_SINGLE_TLV("Headphone Playback Volume",
-+ SUN20I_CODEC_HP2,
-+ SUN20I_CODEC_HP2_HEADPHONE_GAIN,
-+ 0x7, 1, sun20i_codec_headphone_vol_scale),
-+};
-+
-+static const struct snd_kcontrol_new sun20i_codec_line_out_switch =
-+ SOC_DAPM_DOUBLE("Line Out Playback Switch",
-+ SUN20I_CODEC_DAC,
-+ SUN20I_CODEC_DAC_LMUTE,
-+ SUN20I_CODEC_DAC_RMUTE, 1, 1);
-+
-+static const struct snd_kcontrol_new sun20i_codec_hp_switch =
-+ SOC_DAPM_SINGLE("Headphone Playback Switch",
-+ SUN20I_CODEC_HP2,
-+ SUN20I_CODEC_HP2_HP_DRVOUTEN, 1, 0);
-+
-+static const struct snd_kcontrol_new sun20i_codec_adc12_mixer_controls[] = {
-+ /* ADC1 Only */
-+ SOC_DAPM_SINGLE("Mic1 Capture Switch",
-+ SUN20I_CODEC_ADC1,
-+ SUN20I_CODEC_ADC1_MICIN1_SIN_EN, 1, 0),
-+ /* Shared */
-+ SOC_DAPM_DOUBLE_R("FM Capture Switch",
-+ SUN20I_CODEC_ADC1,
-+ SUN20I_CODEC_ADC2,
-+ SUN20I_CODEC_ADC1_FMINL_EN, 1, 0),
-+ /* Shared */
-+ SOC_DAPM_DOUBLE_R("Line In Capture Switch",
-+ SUN20I_CODEC_ADC1,
-+ SUN20I_CODEC_ADC2,
-+ SUN20I_CODEC_ADC1_LINEINL_EN, 1, 0),
-+ /* ADC2 Only */
-+ SOC_DAPM_SINGLE("Mic2 Capture Switch",
-+ SUN20I_CODEC_ADC2,
-+ SUN20I_CODEC_ADC2_MICIN2_SIN_EN, 1, 0),
-+};
-+
-+static const struct snd_kcontrol_new sun20i_codec_adc3_mixer_controls[] = {
-+ SOC_DAPM_SINGLE("Mic3 Capture Switch",
-+ SUN20I_CODEC_ADC3,
-+ SUN20I_CODEC_ADC3_MICIN3_SIN_EN, 1, 0),
-+};
-+
-+static const struct snd_kcontrol_new sun20i_codec_mic1_volume =
-+ SOC_DAPM_SINGLE_TLV("Capture Volume",
-+ SUN20I_CODEC_ADC1,
-+ SUN20I_CODEC_ADC1_ADC1_PGA_GAIN,
-+ 0x1f, 0, sun20i_codec_pga_vol_scale);
-+
-+static const struct snd_kcontrol_new sun20i_codec_mic2_volume =
-+ SOC_DAPM_SINGLE_TLV("Capture Volume",
-+ SUN20I_CODEC_ADC2,
-+ SUN20I_CODEC_ADC2_ADC2_PGA_GAIN,
-+ 0x1f, 0, sun20i_codec_pga_vol_scale);
-+
-+static const struct snd_kcontrol_new sun20i_codec_mic3_volume =
-+ SOC_DAPM_SINGLE_TLV("Capture Volume",
-+ SUN20I_CODEC_ADC3,
-+ SUN20I_CODEC_ADC3_ADC3_PGA_GAIN,
-+ 0x1f, 0, sun20i_codec_pga_vol_scale);
-+
-+static const struct snd_soc_dapm_widget sun20i_codec_widgets[] = {
-+ /* Playback */
-+ SND_SOC_DAPM_OUTPUT("LINEOUTL"),
-+ SND_SOC_DAPM_OUTPUT("LINEOUTR"),
-+
-+ SND_SOC_DAPM_SWITCH("LINEOUTL Switch",
-+ SUN20I_CODEC_DAC,
-+ SUN20I_CODEC_DAC_LINEOUTL_EN, 0,
-+ &sun20i_codec_line_out_switch),
-+ SND_SOC_DAPM_SWITCH("LINEOUTR Switch",
-+ SUN20I_CODEC_DAC,
-+ SUN20I_CODEC_DAC_LINEOUTR_EN, 0,
-+ &sun20i_codec_line_out_switch),
-+
-+ SND_SOC_DAPM_OUTPUT("HPOUTL"),
-+ SND_SOC_DAPM_OUTPUT("HPOUTR"),
-+
-+ SND_SOC_DAPM_SWITCH("HPOUTL Switch",
-+ SND_SOC_NOPM, 0, 0, &sun20i_codec_hp_switch),
-+ SND_SOC_DAPM_SWITCH("HPOUTR Switch",
-+ SND_SOC_NOPM, 0, 0, &sun20i_codec_hp_switch),
-+ SND_SOC_DAPM_SUPPLY("Headphone Driver",
-+ SUN20I_CODEC_HP2,
-+ SUN20I_CODEC_HP2_HP_DRVEN, 0, NULL, 0),
-+
-+ SND_SOC_DAPM_DAC("DACL", NULL,
-+ SUN20I_CODEC_DAC,
-+ SUN20I_CODEC_DAC_DACL_EN, 0),
-+ SND_SOC_DAPM_DAC("DACR", NULL,
-+ SUN20I_CODEC_DAC,
-+ SUN20I_CODEC_DAC_DACR_EN, 0),
-+ SND_SOC_DAPM_SUPPLY("DAC",
-+ SUN20I_CODEC_DAC_DPC,
-+ SUN20I_CODEC_DAC_DPC_EN_DA, 0, NULL, 0),
-+
-+ SND_SOC_DAPM_AIF_IN("DACL FIFO", "Playback", 0,
-+ SND_SOC_NOPM, 0, 0),
-+ SND_SOC_DAPM_AIF_IN("DACR FIFO", "Playback", 1,
-+ SND_SOC_NOPM, 0, 0),
-+
-+ /* Capture */
-+ SND_SOC_DAPM_AIF_OUT("ADC1 FIFO", "Capture", 0,
-+ SND_SOC_NOPM, 0, 0),
-+ SND_SOC_DAPM_AIF_OUT("ADC2 FIFO", "Capture", 1,
-+ SND_SOC_NOPM, 0, 0),
-+ SND_SOC_DAPM_AIF_OUT("ADC3 FIFO", "Capture", 2,
-+ SND_SOC_NOPM, 0, 0),
-+
-+ SND_SOC_DAPM_ADC("ADC1", NULL,
-+ SUN20I_CODEC_ADC1,
-+ SUN20I_CODEC_ADC1_ADC1_EN, 0),
-+ SND_SOC_DAPM_ADC("ADC2", NULL,
-+ SUN20I_CODEC_ADC2,
-+ SUN20I_CODEC_ADC2_ADC2_EN, 0),
-+ SND_SOC_DAPM_ADC("ADC3", NULL,
-+ SUN20I_CODEC_ADC3,
-+ SUN20I_CODEC_ADC3_ADC3_EN, 0),
-+ SND_SOC_DAPM_SUPPLY("ADC",
-+ SUN20I_CODEC_ADC_FIFOC,
-+ SUN20I_CODEC_ADC_FIFOC_EN_AD, 0, NULL, 0),
-+
-+ SND_SOC_DAPM_MIXER_NAMED_CTL("ADC1 Mixer", SND_SOC_NOPM, 0, 0,
-+ sun20i_codec_adc12_mixer_controls, 3),
-+ SND_SOC_DAPM_MIXER_NAMED_CTL("ADC2 Mixer", SND_SOC_NOPM, 0, 0,
-+ sun20i_codec_adc12_mixer_controls + 1, 3),
-+ SND_SOC_DAPM_MIXER_NAMED_CTL("ADC3 Mixer", SND_SOC_NOPM, 0, 0,
-+ sun20i_codec_adc3_mixer_controls,
-+ ARRAY_SIZE(sun20i_codec_adc3_mixer_controls)),
-+
-+ SND_SOC_DAPM_PGA("Mic1",
-+ SUN20I_CODEC_ADC1,
-+ SUN20I_CODEC_ADC1_MICIN1_PGA_EN, 0,
-+ &sun20i_codec_mic1_volume, 1),
-+ SND_SOC_DAPM_PGA("Mic2",
-+ SUN20I_CODEC_ADC2,
-+ SUN20I_CODEC_ADC2_MICIN2_PGA_EN, 0,
-+ &sun20i_codec_mic2_volume, 1),
-+ SND_SOC_DAPM_PGA("Mic3",
-+ SUN20I_CODEC_ADC3,
-+ SUN20I_CODEC_ADC3_MICIN3_PGA_EN, 0,
-+ &sun20i_codec_mic3_volume, 1),
-+
-+ SND_SOC_DAPM_INPUT("MICIN1"),
-+ SND_SOC_DAPM_INPUT("MICIN2"),
-+ SND_SOC_DAPM_INPUT("MICIN3"),
-+
-+ SND_SOC_DAPM_INPUT("FMINL"),
-+ SND_SOC_DAPM_INPUT("FMINR"),
-+
-+ SND_SOC_DAPM_INPUT("LINEINL"),
-+ SND_SOC_DAPM_INPUT("LINEINR"),
-+
-+ SND_SOC_DAPM_SUPPLY("HBIAS",
-+ SUN20I_CODEC_MICBIAS,
-+ SUN20I_CODEC_MICBIAS_HMICBIASEN, 0, NULL, 0),
-+ SND_SOC_DAPM_SUPPLY("MBIAS",
-+ SUN20I_CODEC_MICBIAS,
-+ SUN20I_CODEC_MICBIAS_MMICBIASEN, 0, NULL, 0),
-+
-+ SND_SOC_DAPM_REGULATOR_SUPPLY("avcc", 0, 0),
-+ SND_SOC_DAPM_REGULATOR_SUPPLY("hpvcc", 0, 0),
-+ SND_SOC_DAPM_REGULATOR_SUPPLY("vdd33", 0, 0),
-+};
-+
-+static const struct snd_soc_dapm_route sun20i_codec_routes[] = {
-+ /* Playback */
-+ { "LINEOUTL", NULL, "LINEOUTL Switch" },
-+ { "LINEOUTR", NULL, "LINEOUTR Switch" },
-+
-+ { "LINEOUTL Switch", "Line Out Playback Switch", "DACL" },
-+ { "LINEOUTR Switch", "Line Out Playback Switch", "DACR" },
-+
-+ { "HPOUTL", NULL, "HPOUTL Switch" },
-+ { "HPOUTR", NULL, "HPOUTR Switch" },
-+
-+ { "HPOUTL Switch", "Headphone Playback Switch", "DACL" },
-+ { "HPOUTR Switch", "Headphone Playback Switch", "DACR" },
-+ { "HPOUTL Switch", NULL, "Headphone Driver" },
-+ { "HPOUTR Switch", NULL, "Headphone Driver" },
-+ { "Headphone Driver", NULL, "hpvcc" },
-+
-+ { "DACL", NULL, "DACL FIFO" },
-+ { "DACR", NULL, "DACR FIFO" },
-+ { "DACL", NULL, "DAC" },
-+ { "DACR", NULL, "DAC" },
-+ { "DACL", NULL, "avcc" },
-+ { "DACR", NULL, "avcc" },
-+
-+ /* Capture */
-+ { "ADC1 FIFO", NULL, "ADC1" },
-+ { "ADC2 FIFO", NULL, "ADC2" },
-+ { "ADC3 FIFO", NULL, "ADC3" },
-+
-+ { "ADC1", NULL, "ADC1 Mixer" },
-+ { "ADC2", NULL, "ADC2 Mixer" },
-+ { "ADC3", NULL, "ADC3 Mixer" },
-+ { "ADC1", NULL, "ADC" },
-+ { "ADC2", NULL, "ADC" },
-+ { "ADC3", NULL, "ADC" },
-+ { "ADC1", NULL, "avcc" },
-+ { "ADC2", NULL, "avcc" },
-+ { "ADC3", NULL, "avcc" },
-+
-+ { "ADC1 Mixer", "Mic1 Capture Switch", "Mic1" },
-+ { "ADC2 Mixer", "Mic2 Capture Switch", "Mic2" },
-+ { "ADC3 Mixer", "Mic3 Capture Switch", "Mic3" },
-+ { "ADC1 Mixer", "FM Capture Switch", "FMINL" },
-+ { "ADC2 Mixer", "FM Capture Switch", "FMINR" },
-+ { "ADC1 Mixer", "Line In Capture Switch", "LINEINL" },
-+ { "ADC2 Mixer", "Line In Capture Switch", "LINEINR" },
-+
-+ { "Mic1", NULL, "MICIN1" },
-+ { "Mic2", NULL, "MICIN2" },
-+ { "Mic3", NULL, "MICIN3" },
-+
-+ { "HBIAS", NULL, "vdd33" },
-+ { "MBIAS", NULL, "vdd33" },
-+};
-+
-+static int sun20i_codec_component_probe(struct snd_soc_component *component)
-+{
-+ struct sun20i_codec *codec = snd_soc_component_get_drvdata(component);
-+ int ret;
-+
-+ ret = reset_control_deassert(codec->reset);
-+ if (ret)
-+ return ret;
-+
-+ ret = clk_prepare_enable(codec->bus_clk);
-+ if (ret)
-+ goto err_assert_reset;
-+
-+ /* Enable digital volume control. */
-+ snd_soc_component_update_bits(component, SUN20I_CODEC_DAC_VOL_CTRL,
-+ 0x1 << SUN20I_CODEC_DAC_VOL_CTRL_DAC_VOL_SEL,
-+ 0x1 << SUN20I_CODEC_DAC_VOL_CTRL_DAC_VOL_SEL);
-+ snd_soc_component_update_bits(component, SUN20I_CODEC_ADC_DIG_CTRL,
-+ 0x3 << SUN20I_CODEC_ADC_DIG_CTRL_ADC_VOL_EN,
-+ 0x3 << SUN20I_CODEC_ADC_DIG_CTRL_ADC_VOL_EN);
-+
-+ return 0;
-+
-+err_assert_reset:
-+ reset_control_assert(codec->reset);
-+
-+ return ret;
-+}
-+
-+static void sun20i_codec_component_remove(struct snd_soc_component *component)
-+{
-+ struct sun20i_codec *codec = snd_soc_component_get_drvdata(component);
-+
-+ clk_disable_unprepare(codec->bus_clk);
-+ reset_control_assert(codec->reset);
-+}
-+
-+static const struct snd_soc_component_driver sun20i_codec_component = {
-+ .controls = sun20i_codec_controls,
-+ .num_controls = ARRAY_SIZE(sun20i_codec_controls),
-+ .dapm_widgets = sun20i_codec_widgets,
-+ .num_dapm_widgets = ARRAY_SIZE(sun20i_codec_widgets),
-+ .dapm_routes = sun20i_codec_routes,
-+ .num_dapm_routes = ARRAY_SIZE(sun20i_codec_routes),
-+ .probe = sun20i_codec_component_probe,
-+ .remove = sun20i_codec_component_remove,
-+};
-+
-+static int sun20i_codec_init_card(struct device *dev,
-+ struct sun20i_codec *codec)
-+{
-+ struct snd_soc_dai_link *dai_link = &codec->dai_link;
-+ struct snd_soc_card *card = &codec->card;
-+ int ret;
-+
-+ codec->dlcs[0].of_node = dev->of_node;
-+ codec->dlcs[0].dai_name = DRIVER_NAME;
-+ codec->dlcs[1].name = "snd-soc-dummy";
-+ codec->dlcs[1].dai_name = "snd-soc-dummy-dai";
-+ codec->dlcs[2].of_node = dev->of_node;
-+
-+ dai_link->name = DRIVER_NAME;
-+ dai_link->stream_name = DRIVER_NAME;
-+ dai_link->cpus = &codec->dlcs[0];
-+ dai_link->num_cpus = 1;
-+ dai_link->codecs = &codec->dlcs[1];
-+ dai_link->num_codecs = 1;
-+ dai_link->platforms = &codec->dlcs[2];
-+ dai_link->num_platforms = 1;
-+
-+ card->name = DRIVER_NAME;
-+ card->dev = dev;
-+ card->owner = THIS_MODULE;
-+ card->dai_link = dai_link;
-+ card->num_links = 1;
-+ card->fully_routed = true;
-+
-+ ret = snd_soc_of_parse_aux_devs(card, "aux-devs");
-+ if (ret)
-+ return ret;
-+
-+ ret = snd_soc_of_parse_pin_switches(card, "pin-switches");
-+ if (ret)
-+ return ret;
-+
-+ ret = snd_soc_of_parse_audio_routing(card, "routing");
-+ if (ret)
-+ return ret;
-+
-+ ret = snd_soc_of_parse_audio_simple_widgets(card, "widgets");
-+ if (ret)
-+ return ret;
-+
-+ return 0;
-+}
-+
-+static const struct regmap_config sun20i_codec_regmap_config = {
-+ .reg_bits = 32,
-+ .reg_stride = 4,
-+ .val_bits = 32,
-+ .max_register = SUN20I_CODEC_ADC_CUR,
-+};
-+
-+static int sun20i_codec_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct sun20i_codec *codec;
-+ struct regmap *regmap;
-+ struct resource *res;
-+ void __iomem *base;
-+ int ret;
-+
-+ codec = devm_kzalloc(dev, sizeof(*codec), GFP_KERNEL);
-+ if (!codec)
-+ return -ENOMEM;
-+
-+ dev_set_drvdata(dev, codec);
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ base = devm_ioremap_resource(dev, res);
-+ if (IS_ERR(base))
-+ return dev_err_probe(dev, PTR_ERR(base),
-+ "Failed to map registers\n");
-+
-+ regmap = devm_regmap_init_mmio(dev, base,
-+ &sun20i_codec_regmap_config);
-+ if (IS_ERR(regmap))
-+ return dev_err_probe(dev, PTR_ERR(regmap),
-+ "Failed to create regmap\n");
-+
-+ codec->bus_clk = devm_clk_get(dev, "bus");
-+ if (IS_ERR(codec->bus_clk))
-+ return dev_err_probe(dev, PTR_ERR(codec->bus_clk),
-+ "Failed to get bus clock\n");
-+
-+ codec->adc_clk = devm_clk_get(dev, "adc");
-+ if (IS_ERR(codec->adc_clk))
-+ return dev_err_probe(dev, PTR_ERR(codec->adc_clk),
-+ "Failed to get ADC clock\n");
-+
-+ codec->dac_clk = devm_clk_get(dev, "dac");
-+ if (IS_ERR(codec->dac_clk))
-+ return dev_err_probe(dev, PTR_ERR(codec->dac_clk),
-+ "Failed to get DAC clock\n");
-+
-+ codec->reset = devm_reset_control_get_exclusive(dev, NULL);
-+ if (IS_ERR(codec->reset))
-+ return dev_err_probe(dev, PTR_ERR(codec->reset),
-+ "Failed to get reset\n");
-+
-+ ret = devm_snd_soc_register_component(dev, &sun20i_codec_component,
-+ &sun20i_codec_dai, 1);
-+ if (ret)
-+ return dev_err_probe(dev, ret, "Failed to register component\n");
-+
-+ codec->dma_data[SNDRV_PCM_STREAM_PLAYBACK].addr =
-+ res->start + SUN20I_CODEC_DAC_TXDATA;
-+ codec->dma_data[SNDRV_PCM_STREAM_PLAYBACK].maxburst = 8;
-+ codec->dma_data[SNDRV_PCM_STREAM_CAPTURE].addr =
-+ res->start + SUN20I_CODEC_ADC_RXDATA;
-+ codec->dma_data[SNDRV_PCM_STREAM_CAPTURE].maxburst = 8;
-+
-+ ret = devm_snd_dmaengine_pcm_register(dev, NULL, 0);
-+ if (ret)
-+ return dev_err_probe(dev, ret, "Failed to register PCM\n");
-+
-+ ret = sun20i_codec_init_card(dev, codec);
-+ if (ret)
-+ return dev_err_probe(dev, ret, "Failed to initialize card\n");
-+
-+ ret = devm_snd_soc_register_card(dev, &codec->card);
-+ if (ret)
-+ return dev_err_probe(dev, ret, "Failed to register card\n");
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id sun20i_codec_of_match[] = {
-+ { .compatible = "allwinner,sun20i-d1-codec" },
-+ {}
-+};
-+MODULE_DEVICE_TABLE(of, sun20i_codec_of_match);
-+
-+static struct platform_driver sun20i_codec_driver = {
-+ .driver = {
-+ .name = DRIVER_NAME,
-+ .of_match_table = sun20i_codec_of_match,
-+ },
-+ .probe = sun20i_codec_probe,
-+};
-+module_platform_driver(sun20i_codec_driver);
-+
-+MODULE_DESCRIPTION("Allwinner D1 (sun20i) codec driver");
-+MODULE_AUTHOR("Samuel Holland <samuel@sholland.org>");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("platform:sun20i-codec");
+++ /dev/null
-From 87a77f803f5038e3fc64f45d5142ea402512029a Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Wed, 23 Jun 2021 21:18:47 -0500
-Subject: [PATCH 082/117] ASoC: sun20i-codec: What is this ramp thing?
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- sound/soc/sunxi/sun20i-codec.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/sound/soc/sunxi/sun20i-codec.c
-+++ b/sound/soc/sunxi/sun20i-codec.c
-@@ -709,6 +709,10 @@ static int sun20i_codec_component_probe(
- 0x3 << SUN20I_CODEC_ADC_DIG_CTRL_ADC_VOL_EN,
- 0x3 << SUN20I_CODEC_ADC_DIG_CTRL_ADC_VOL_EN);
-
-+ /* Maaagic... */
-+ snd_soc_component_update_bits(component, SUN20I_CODEC_RAMP,
-+ BIT(1) | BIT(0), BIT(0));
-+
- return 0;
-
- err_assert_reset:
+++ /dev/null
-From 54b1030c72d74ba6390d62086cbfc6a511f58aa7 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Thu, 11 Aug 2022 00:39:42 -0500
-Subject: [PATCH 083/117] riscv: dts: allwinner: d1: Add sound cards to boards
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- .../sun20i-d1-common-regulators.dtsi | 5 +++++
- .../sun20i-d1-lichee-rv-86-panel.dtsi | 21 +++++++++++++++++++
- .../allwinner/sun20i-d1-lichee-rv-dock.dts | 12 +++++++++++
- .../boot/dts/allwinner/sun20i-d1-nezha.dts | 12 +++++++++++
- arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi | 13 +++++++++++-
- 5 files changed, 62 insertions(+), 1 deletion(-)
-
---- a/arch/riscv/boot/dts/allwinner/sun20i-d1-common-regulators.dtsi
-+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-common-regulators.dtsi
-@@ -18,6 +18,11 @@
- };
- };
-
-+&codec {
-+ avcc-supply = <®_aldo>;
-+ hpvcc-supply = <®_hpldo>;
-+};
-+
- &lradc {
- vref-supply = <®_aldo>;
- };
---- a/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel.dtsi
-+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel.dtsi
-@@ -9,6 +9,12 @@
- ethernet1 = &xr829;
- };
-
-+ audio_amplifier: audio-amplifier {
-+ compatible = "simple-audio-amplifier";
-+ enable-gpios = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
-+ sound-name-prefix = "Amplifier";
-+ };
-+
- dmic_codec: dmic-codec {
- compatible = "dmic-codec";
- num-channels = <2>;
-@@ -51,6 +57,21 @@
- };
- };
-
-+&codec {
-+ aux-devs = <&audio_amplifier>;
-+ routing = "Internal Speaker", "Amplifier OUTL",
-+ "Internal Speaker", "Amplifier OUTR",
-+ "Amplifier INL", "HPOUTL",
-+ "Amplifier INR", "HPOUTR",
-+ "LINEINL", "HPOUTL",
-+ "LINEINR", "HPOUTR",
-+ "MICIN3", "Internal Microphone",
-+ "Internal Microphone", "HBIAS";
-+ widgets = "Microphone", "Internal Microphone",
-+ "Speaker", "Internal Speaker";
-+ status = "okay";
-+};
-+
- &dmic {
- pinctrl-0 = <&dmic_pb11_d0_pin>, <&dmic_pe17_clk_pin>;
- pinctrl-names = "default";
---- a/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dts
-+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dts
-@@ -48,6 +48,18 @@
- };
- };
-
-+&codec {
-+ routing = "Internal Speaker", "HPOUTL",
-+ "Internal Speaker", "HPOUTR",
-+ "LINEINL", "HPOUTL",
-+ "LINEINR", "HPOUTR",
-+ "MICIN3", "Internal Microphone",
-+ "Internal Microphone", "HBIAS";
-+ widgets = "Microphone", "Internal Microphone",
-+ "Speaker", "Internal Speaker";
-+ status = "okay";
-+};
-+
- &dmic {
- pinctrl-0 = <&dmic_pb11_d0_pin>, <&dmic_pe17_clk_pin>;
- pinctrl-names = "default";
---- a/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
-+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
-@@ -51,6 +51,18 @@
- };
- };
-
-+&codec {
-+ routing = "Headphone Jack", "HPOUTL",
-+ "Headphone Jack", "HPOUTR",
-+ "LINEINL", "HPOUTL",
-+ "LINEINR", "HPOUTR",
-+ "MICIN3", "Headset Microphone",
-+ "Headset Microphone", "HBIAS";
-+ widgets = "Microphone", "Headset Microphone",
-+ "Headphone", "Headphone Jack";
-+ status = "okay";
-+};
-+
- &cpu0 {
- cpu-supply = <®_vdd_cpu>;
- };
---- a/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
-+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
-@@ -312,10 +312,21 @@
- };
-
- codec: audio-codec@2030000 {
-- compatible = "simple-mfd", "syscon";
-+ compatible = "allwinner,sun20i-d1-codec", "simple-mfd", "syscon";
- reg = <0x2030000 0x1000>;
-+ interrupts = <41 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_AUDIO>,
-+ <&ccu CLK_AUDIO_ADC>,
-+ <&ccu CLK_AUDIO_DAC>,
-+ <&osc24M>,
-+ <&rtc CLK_OSC32K>;
-+ clock-names = "bus", "adc", "dac", "hosc", "losc";
-+ resets = <&ccu RST_BUS_AUDIO>;
-+ dmas = <&dma 7>, <&dma 7>;
-+ dma-names = "rx", "tx";
- #address-cells = <1>;
- #size-cells = <1>;
-+ #sound-dai-cells = <0>;
-
- regulators@2030348 {
- compatible = "allwinner,sun20i-d1-analog-ldos";
+++ /dev/null
-From bae2790f627eb30ec3845167341b108e13328f6f Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 7 Aug 2022 10:46:43 -0500
-Subject: [PATCH 084/117] drm/sun4i: dsi: Allow panel attach before card
- registration
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
-+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
-@@ -967,13 +967,12 @@ static int sun6i_dsi_attach(struct mipi_
-
- if (IS_ERR(panel))
- return PTR_ERR(panel);
-- if (!dsi->drm || !dsi->drm->registered)
-- return -EPROBE_DEFER;
-
- dsi->panel = panel;
- dsi->device = device;
-
-- drm_kms_helper_hotplug_event(dsi->drm);
-+ if (dsi->drm && dsi->drm->registered)
-+ drm_kms_helper_hotplug_event(dsi->drm);
-
- dev_info(host->dev, "Attached device %s\n", device->name);
-
-@@ -988,7 +987,8 @@ static int sun6i_dsi_detach(struct mipi_
- dsi->panel = NULL;
- dsi->device = NULL;
-
-- drm_kms_helper_hotplug_event(dsi->drm);
-+ if (dsi->drm && dsi->drm->registered)
-+ drm_kms_helper_hotplug_event(dsi->drm);
-
- return 0;
- }
+++ /dev/null
-From 5755bea969adcb00b102271b0cbaa3002acd7a35 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Wed, 27 Apr 2022 18:50:01 -0500
-Subject: [PATCH 085/117] drm/sun4i: mixer: Remove unused CMA headers
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- drivers/gpu/drm/sun4i/sun8i_mixer.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/gpu/drm/sun4i/sun8i_mixer.c
-+++ b/drivers/gpu/drm/sun4i/sun8i_mixer.c
-@@ -17,7 +17,7 @@
- #include <drm/drm_atomic_helper.h>
- #include <drm/drm_crtc.h>
- #include <drm/drm_framebuffer.h>
--#include <drm/drm_gem_dma_helper.h>
-+#include <drm/drm_print.h>
- #include <drm/drm_probe_helper.h>
-
- #include "sun4i_drv.h"
+++ /dev/null
-From 9a7acb8f03346705d7420a490d95b32309d90e22 Mon Sep 17 00:00:00 2001
-From: Roman Beranek <roman.beranek@prusa3d.com>
-Date: Wed, 25 Nov 2020 13:07:35 +0100
-Subject: [PATCH 086/117] drm/sun4i: decouple TCON_DCLK_DIV value from
- pll_mipi/dotclock ratio
-
-Observations showed that an actual refresh rate differs from the intended.
-Specifically, in case of 4-lane panels it was reduced by 1/3, and in case of
-2-lane panels by 2/3.
-
-BSP code apparently distinguishes between a `dsi_div` and a 'tcon inner div'.
-While this 'inner' divider is under DSI always 4, the `dsi_div` is defined
-as a number of bits per pixel over a number of DSI lanes. This value is then
-involved in setting the rate of PLL_MIPI.
-
-I couldn't really figure out how to fit this into the dotclock driver,
-so I opted for this hack where the requested rate is adjusted in such a way
-that the sun4i_dotclock driver can remain untouched.
-
-Signed-off-by: Roman Beranek <roman.beranek@prusa3d.com>
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- drivers/gpu/drm/sun4i/sun4i_tcon.c | 44 +++++++++++++++++-------------
- 1 file changed, 25 insertions(+), 19 deletions(-)
-
---- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
-+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
-@@ -291,18 +291,6 @@ static int sun4i_tcon_get_clk_delay(cons
- return delay;
- }
-
--static void sun4i_tcon0_mode_set_common(struct sun4i_tcon *tcon,
-- const struct drm_display_mode *mode)
--{
-- /* Configure the dot clock */
-- clk_set_rate(tcon->dclk, mode->crtc_clock * 1000);
--
-- /* Set the resolution */
-- regmap_write(tcon->regs, SUN4I_TCON0_BASIC0_REG,
-- SUN4I_TCON0_BASIC0_X(mode->crtc_hdisplay) |
-- SUN4I_TCON0_BASIC0_Y(mode->crtc_vdisplay));
--}
--
- static void sun4i_tcon0_mode_set_dithering(struct sun4i_tcon *tcon,
- const struct drm_connector *connector)
- {
-@@ -365,12 +353,18 @@ static void sun4i_tcon0_mode_set_cpu(str
- u8 bpp = mipi_dsi_pixel_format_to_bpp(device->format);
- u8 lanes = device->lanes;
- u32 block_space, start_delay;
-- u32 tcon_div;
-
- tcon->dclk_min_div = SUN6I_DSI_TCON_DIV;
- tcon->dclk_max_div = SUN6I_DSI_TCON_DIV;
-
-- sun4i_tcon0_mode_set_common(tcon, mode);
-+ /* Configure the dot clock */
-+ clk_set_rate(tcon->dclk, mode->crtc_clock * 1000
-+ * bpp / (lanes * SUN6I_DSI_TCON_DIV));
-+
-+ /* Set the resolution */
-+ regmap_write(tcon->regs, SUN4I_TCON0_BASIC0_REG,
-+ SUN4I_TCON0_BASIC0_X(mode->crtc_hdisplay) |
-+ SUN4I_TCON0_BASIC0_Y(mode->crtc_vdisplay));
-
- /* Set dithering if needed */
- sun4i_tcon0_mode_set_dithering(tcon, sun4i_tcon_get_connector(encoder));
-@@ -394,9 +388,7 @@ static void sun4i_tcon0_mode_set_cpu(str
- * The datasheet says that this should be set higher than 20 *
- * pixel cycle, but it's not clear what a pixel cycle is.
- */
-- regmap_read(tcon->regs, SUN4I_TCON0_DCLK_REG, &tcon_div);
-- tcon_div &= GENMASK(6, 0);
-- block_space = mode->htotal * bpp / (tcon_div * lanes);
-+ block_space = mode->htotal * bpp / (SUN6I_DSI_TCON_DIV * lanes);
- block_space -= mode->hdisplay + 40;
-
- regmap_write(tcon->regs, SUN4I_TCON0_CPU_TRI0_REG,
-@@ -438,7 +430,14 @@ static void sun4i_tcon0_mode_set_lvds(st
-
- tcon->dclk_min_div = 7;
- tcon->dclk_max_div = 7;
-- sun4i_tcon0_mode_set_common(tcon, mode);
-+
-+ /* Configure the dot clock */
-+ clk_set_rate(tcon->dclk, mode->crtc_clock * 1000);
-+
-+ /* Set the resolution */
-+ regmap_write(tcon->regs, SUN4I_TCON0_BASIC0_REG,
-+ SUN4I_TCON0_BASIC0_X(mode->crtc_hdisplay) |
-+ SUN4I_TCON0_BASIC0_Y(mode->crtc_vdisplay));
-
- /* Set dithering if needed */
- sun4i_tcon0_mode_set_dithering(tcon, sun4i_tcon_get_connector(encoder));
-@@ -515,7 +514,14 @@ static void sun4i_tcon0_mode_set_rgb(str
-
- tcon->dclk_min_div = tcon->quirks->dclk_min_div;
- tcon->dclk_max_div = 127;
-- sun4i_tcon0_mode_set_common(tcon, mode);
-+
-+ /* Configure the dot clock */
-+ clk_set_rate(tcon->dclk, mode->crtc_clock * 1000);
-+
-+ /* Set the resolution */
-+ regmap_write(tcon->regs, SUN4I_TCON0_BASIC0_REG,
-+ SUN4I_TCON0_BASIC0_X(mode->crtc_hdisplay) |
-+ SUN4I_TCON0_BASIC0_Y(mode->crtc_vdisplay));
-
- /* Set dithering if needed */
- sun4i_tcon0_mode_set_dithering(tcon, connector);
+++ /dev/null
-From 9ea0c216d4f85a8ea888a38853e9573bbd9e995a Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 7 Aug 2022 21:09:39 -0500
-Subject: [PATCH 087/117] drm/sun4i: tcon: Always protect the LCD dotclock rate
-
-This handles the case where multiple CRTCs get their .mode_set function
-called during the same atomic commit, before rate protection is applied
-by enabling the CRTC.
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- drivers/gpu/drm/sun4i/sun4i_dotclock.c | 4 ++++
- drivers/gpu/drm/sun4i/sun4i_tcon.c | 6 ++++--
- 2 files changed, 8 insertions(+), 2 deletions(-)
-
---- a/drivers/gpu/drm/sun4i/sun4i_dotclock.c
-+++ b/drivers/gpu/drm/sun4i/sun4i_dotclock.c
-@@ -6,6 +6,7 @@
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- */
-
-+#include <linux/clk.h>
- #include <linux/clk-provider.h>
- #include <linux/regmap.h>
-
-@@ -194,12 +195,15 @@ int sun4i_dclk_create(struct device *dev
- if (IS_ERR(tcon->dclk))
- return PTR_ERR(tcon->dclk);
-
-+ clk_rate_exclusive_get(tcon->dclk);
-+
- return 0;
- }
- EXPORT_SYMBOL(sun4i_dclk_create);
-
- int sun4i_dclk_free(struct sun4i_tcon *tcon)
- {
-+ clk_rate_exclusive_put(tcon->dclk);
- clk_unregister(tcon->dclk);
- return 0;
- }
---- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
-+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
-@@ -108,9 +108,11 @@ static void sun4i_tcon_channel_set_statu
-
- if (enabled) {
- clk_prepare_enable(clk);
-- clk_rate_exclusive_get(clk);
-+ if (clk != tcon->dclk)
-+ clk_rate_exclusive_get(clk);
- } else {
-- clk_rate_exclusive_put(clk);
-+ if (clk != tcon->dclk)
-+ clk_rate_exclusive_put(clk);
- clk_disable_unprepare(clk);
- }
- }
+++ /dev/null
-From f792492db1f42c43eb4b8bb72ce573418afc933d Mon Sep 17 00:00:00 2001
-From: Jagan Teki <jagan@amarulasolutions.com>
-Date: Tue, 31 Dec 2019 18:35:24 +0530
-Subject: [PATCH 088/117] drm/sun4i: tcon_top: Register reset, clock gates in
- probe
-
-TCON TOP is processing clock gates and reset control for
-TV0, TV1 and DSI channels during bind and release the same
-during unbind component ops.
-
-The usual DSI initialization would setup all controller
-clocks along with DPHY clocking during probe.
-
-Since the actual clock gates (along with DSI clock gate)
-are initialized during ton top bind, the DPHY is failed to
-get the DSI clock during that time.
-
-To solve, this circular dependency move the reset control,
-clock gate registration from bind to probe and release the
-same from unbind to remove.
-
-This eventually give a chance DPHY to initialize the DSI
-clock gate.
-
-Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- drivers/gpu/drm/sun4i/sun8i_tcon_top.c | 42 ++++++++++++++------------
- 1 file changed, 22 insertions(+), 20 deletions(-)
-
---- a/drivers/gpu/drm/sun4i/sun8i_tcon_top.c
-+++ b/drivers/gpu/drm/sun4i/sun8i_tcon_top.c
-@@ -124,14 +124,29 @@ static struct clk_hw *sun8i_tcon_top_reg
- static int sun8i_tcon_top_bind(struct device *dev, struct device *master,
- void *data)
- {
-- struct platform_device *pdev = to_platform_device(dev);
-+ return 0;
-+}
-+
-+static void sun8i_tcon_top_unbind(struct device *dev, struct device *master,
-+ void *data)
-+{
-+}
-+
-+static const struct component_ops sun8i_tcon_top_ops = {
-+ .bind = sun8i_tcon_top_bind,
-+ .unbind = sun8i_tcon_top_unbind,
-+};
-+
-+static int sun8i_tcon_top_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
- struct clk_hw_onecell_data *clk_data;
- struct sun8i_tcon_top *tcon_top;
- const struct sun8i_tcon_top_quirks *quirks;
- void __iomem *regs;
- int ret, i;
-
-- quirks = of_device_get_match_data(&pdev->dev);
-+ quirks = of_device_get_match_data(dev);
-
- tcon_top = devm_kzalloc(dev, sizeof(*tcon_top), GFP_KERNEL);
- if (!tcon_top)
-@@ -222,7 +237,7 @@ static int sun8i_tcon_top_bind(struct de
-
- dev_set_drvdata(dev, tcon_top);
-
-- return 0;
-+ return component_add(dev, &sun8i_tcon_top_ops);
-
- err_unregister_gates:
- for (i = 0; i < CLK_NUM; i++)
-@@ -235,13 +250,15 @@ err_assert_reset:
- return ret;
- }
-
--static void sun8i_tcon_top_unbind(struct device *dev, struct device *master,
-- void *data)
-+static int sun8i_tcon_top_remove(struct platform_device *pdev)
- {
-+ struct device *dev = &pdev->dev;
- struct sun8i_tcon_top *tcon_top = dev_get_drvdata(dev);
- struct clk_hw_onecell_data *clk_data = tcon_top->clk_data;
- int i;
-
-+ component_del(dev, &sun8i_tcon_top_ops);
-+
- of_clk_del_provider(dev->of_node);
- for (i = 0; i < CLK_NUM; i++)
- if (clk_data->hws[i])
-@@ -249,21 +266,6 @@ static void sun8i_tcon_top_unbind(struct
-
- clk_disable_unprepare(tcon_top->bus);
- reset_control_assert(tcon_top->rst);
--}
--
--static const struct component_ops sun8i_tcon_top_ops = {
-- .bind = sun8i_tcon_top_bind,
-- .unbind = sun8i_tcon_top_unbind,
--};
--
--static int sun8i_tcon_top_probe(struct platform_device *pdev)
--{
-- return component_add(&pdev->dev, &sun8i_tcon_top_ops);
--}
--
--static int sun8i_tcon_top_remove(struct platform_device *pdev)
--{
-- component_del(&pdev->dev, &sun8i_tcon_top_ops);
-
- return 0;
- }
+++ /dev/null
-From 03dbb926f6d65f75af902e421c44aeaaf84be66a Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Thu, 11 Aug 2022 22:46:28 -0500
-Subject: [PATCH 089/117] riscv: dts: allwinner: lichee-rv-86-panel-480p: Add
- panel
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- .../sun20i-d1-lichee-rv-86-panel-480p.dts | 51 +++++++++++++++++++
- 1 file changed, 51 insertions(+)
-
---- a/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel-480p.dts
-+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel-480p.dts
-@@ -7,6 +7,40 @@
- model = "Sipeed Lichee RV 86 Panel (480p)";
- compatible = "sipeed,lichee-rv-86-panel-480p", "sipeed,lichee-rv",
- "allwinner,sun20i-d1";
-+
-+ backlight: backlight {
-+ compatible = "pwm-backlight";
-+ power-supply = <®_vcc>;
-+ pwms = <&pwm 7 50000 0>;
-+ };
-+
-+ spi {
-+ compatible = "spi-gpio";
-+ cs-gpios = <&pio 4 14 GPIO_ACTIVE_LOW>; /* PE14 */
-+ mosi-gpios = <&pio 4 12 GPIO_ACTIVE_HIGH>; /* PE12 */
-+ sck-gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>; /* PE15 */
-+ num-chipselects = <1>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ panel@0 {
-+ compatible = "sitronix,st7701s";
-+ reg = <0>;
-+ backlight = <&backlight>;
-+ reset-gpios = <&pio 6 13 GPIO_ACTIVE_LOW>; /* PG13 */
-+ spi-3wire;
-+
-+ port {
-+ panel_in_tcon_lcd0: endpoint {
-+ remote-endpoint = <&tcon_lcd0_out_panel>;
-+ };
-+ };
-+ };
-+ };
-+};
-+
-+&de {
-+ status = "okay";
- };
-
- &i2c2 {
-@@ -27,3 +61,20 @@
- wakeup-source;
- };
- };
-+
-+&pwm {
-+ pinctrl-0 = <&pwm7_pd22_pin>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+};
-+
-+&tcon_lcd0 {
-+ pinctrl-0 = <&lcd_rgb666_pins>;
-+ pinctrl-names = "default";
-+};
-+
-+&tcon_lcd0_out {
-+ tcon_lcd0_out_panel: endpoint {
-+ remote-endpoint = <&panel_in_tcon_lcd0>;
-+ };
-+};
+++ /dev/null
-From 4c72279c90469971ca5ec627a76e50bf51bf076f Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 7 Aug 2022 10:59:29 -0500
-Subject: [PATCH 090/117] riscv: dts: allwinner: d1: Add DSI pipeline
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi | 49 ++++++++++++++++++++
- 1 file changed, 49 insertions(+)
-
---- a/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
-+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
-@@ -124,6 +124,14 @@
- #interrupt-cells = <3>;
-
- /omit-if-no-ref/
-+ dsi_4lane_pins: dsi-4lane-pins {
-+ pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5",
-+ "PD6", "PD7", "PD8", "PD9";
-+ drive-strength = <30>;
-+ function = "dsi";
-+ };
-+
-+ /omit-if-no-ref/
- i2c0_pb10_pins: i2c0-pb10-pins {
- pins = "PB10", "PB11";
- function = "i2c0";
-@@ -903,6 +911,40 @@
- };
- };
-
-+ dsi: dsi@5450000 {
-+ compatible = "allwinner,sun20i-d1-mipi-dsi",
-+ "allwinner,sun50i-a100-mipi-dsi";
-+ reg = <0x5450000 0x1000>;
-+ interrupts = <108 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_MIPI_DSI>,
-+ <&tcon_top CLK_TCON_TOP_DSI>;
-+ clock-names = "bus", "mod";
-+ resets = <&ccu RST_BUS_MIPI_DSI>;
-+ phys = <&dphy>;
-+ phy-names = "dphy";
-+ status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ port {
-+ dsi_in_tcon_lcd0: endpoint {
-+ remote-endpoint = <&tcon_lcd0_out_dsi>;
-+ };
-+ };
-+ };
-+
-+ dphy: phy@5451000 {
-+ compatible = "allwinner,sun20i-d1-mipi-dphy",
-+ "allwinner,sun50i-a100-mipi-dphy";
-+ reg = <0x5451000 0x1000>;
-+ interrupts = <108 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_MIPI_DSI>,
-+ <&ccu CLK_MIPI_DSI>;
-+ clock-names = "bus", "mod";
-+ resets = <&ccu RST_BUS_MIPI_DSI>;
-+ #phy-cells = <0>;
-+ };
-+
- tcon_top: tcon-top@5460000 {
- compatible = "allwinner,sun20i-d1-tcon-top";
- reg = <0x5460000 0x1000>;
-@@ -1022,6 +1064,13 @@
-
- tcon_lcd0_out: port@1 {
- reg = <1>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ tcon_lcd0_out_dsi: endpoint@1 {
-+ reg = <1>;
-+ remote-endpoint = <&dsi_in_tcon_lcd0>;
-+ };
- };
- };
- };
+++ /dev/null
-From 7ac17ab7ea644ec27935865d6d0208ecc7fd4ed9 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Thu, 11 Aug 2022 22:29:03 -0500
-Subject: [PATCH 091/117] riscv: dts: allwinner: devterm: Add DSI panel and
- backlight
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- .../allwinner/sun20i-d1-clockworkpi-v3.14.dts | 8 +++++++-
- .../dts/allwinner/sun20i-d1-devterm-v3.14.dts | 20 +++++++++++++++++++
- 2 files changed, 27 insertions(+), 1 deletion(-)
-
---- a/arch/riscv/boot/dts/allwinner/sun20i-d1-clockworkpi-v3.14.dts
-+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-clockworkpi-v3.14.dts
-@@ -48,6 +48,12 @@
- };
- };
-
-+ backlight: backlight {
-+ compatible = "pwm-backlight";
-+ power-supply = <®_vcc>;
-+ pwms = <&pwm 4 50000 0>; /* PD20/GPIO9 */
-+ };
-+
- reg_vdd_cpu: vdd-cpu {
- compatible = "pwm-regulator";
- pwms = <&pwm 0 50000 0>;
-@@ -252,7 +258,7 @@
- };
-
- &pwm {
-- pinctrl-0 = <&pwm0_pd16_pin>;
-+ pinctrl-0 = <&pwm0_pd16_pin>, <&pwm4_pd20_pin>;
- pinctrl-names = "default";
- status = "okay";
- };
---- a/arch/riscv/boot/dts/allwinner/sun20i-d1-devterm-v3.14.dts
-+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-devterm-v3.14.dts
-@@ -35,3 +35,23 @@
- };
- };
- };
-+
-+&de {
-+ status = "okay";
-+};
-+
-+&dsi {
-+ pinctrl-0 = <&dsi_4lane_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+
-+ panel@0 {
-+ compatible = "clockwork,cwd686";
-+ reg = <0>;
-+ backlight = <&backlight>;
-+ reset-gpios = <&pio 3 19 GPIO_ACTIVE_LOW>; /* PD19/GPIO8 */
-+ rotation = <90>;
-+ iovcc-supply = <®_dcdc3>;
-+ vci-supply = <®_aldo2>;
-+ };
-+};
+++ /dev/null
-From 822fdc3556b688103cdaf7b4b34e98fbe1676425 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 7 Aug 2022 10:58:02 -0500
-Subject: [PATCH 092/117] dt-bindings: display: sun4i-tcon: Add external LVDS
- PHY
-
-A100 and D1 use the same "combo" PHY for LVDS0 and DSI.
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- .../bindings/display/allwinner,sun4i-a10-tcon.yaml | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
-+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
-@@ -80,6 +80,13 @@ properties:
- dmas:
- maxItems: 1
-
-+ phys:
-+ maxItems: 1
-+
-+ phy-names:
-+ items:
-+ - const: "lvds0"
-+
- resets:
- anyOf:
- - items:
+++ /dev/null
-From 7d95f6b52ea5f01c9e2414d4984e5a274328c021 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 7 Aug 2022 10:58:57 -0500
-Subject: [PATCH 093/117] riscv: dts: allwinner: d1: Add LVDS0 PHY
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
-+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
-@@ -1040,6 +1040,8 @@
- resets = <&ccu RST_BUS_TCON_LCD0>,
- <&ccu RST_BUS_LVDS0>;
- reset-names = "lcd", "lvds";
-+ phys = <&dphy>;
-+ phy-names = "lvds0";
- #clock-cells = <0>;
-
- ports {
+++ /dev/null
-From d0f7ed9dc803e09fb6c1e895efbd1182c9212483 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 7 Aug 2022 10:49:30 -0500
-Subject: [PATCH 094/117] dt-bindings: display: sun6i-dsi: Fix clock
- conditional
-
-The A64 case should have limited maxItems, instead of duplicating the
-minItems value from the main binding. While here, simplify the binding
-by making this an "else" case of the two-clock conditional block.
-
-Fixes: fe5040f2843a ("dt-bindings: sun6i-dsi: Document A64 MIPI-DSI controller")
-Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- .../bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml | 10 ++--------
- 1 file changed, 2 insertions(+), 8 deletions(-)
-
---- a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
-+++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
-@@ -78,16 +78,10 @@ allOf:
- required:
- - clock-names
-
-- - if:
-- properties:
-- compatible:
-- contains:
-- const: allwinner,sun50i-a64-mipi-dsi
--
-- then:
-+ else:
- properties:
- clocks:
-- minItems: 1
-+ maxItems: 1
-
- unevaluatedProperties: false
-
+++ /dev/null
-From 30abd0e5f27bc57fba7084ba51aca671316b6d24 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 7 Aug 2022 10:50:21 -0500
-Subject: [PATCH 095/117] dt-bindings: display: sun6i-dsi: Add the A100 variant
-
-The "40nm" MIPI DSI controller found in the A100 and D1 SoCs has the
-same register layout as previous SoC integrations. However, its module
-clock now comes from the TCON, which means it no longer runs at a fixed
-rate, so this needs to be distinguished in the driver.
-
-The controller also now uses pins on Port D instead of dedicated pins,
-so it drops the separate power domain.
-
-Commit-notes:
-Removal of the vcc-dsi-supply is maybe a bit questionable. Since there
-is no "VCC-DSI" pin anymore, it's not obvious which pin actually does
-power the DSI controller/PHY. Possibly power comes from VCC-PD or VCC-IO
-or VCC-LVDS. So far, all boards have all of these as always-on supplies,
-so it is hard to test.
-END
-
-Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- .../display/allwinner,sun6i-a31-mipi-dsi.yaml | 28 +++++++++++++++----
- 1 file changed, 23 insertions(+), 5 deletions(-)
-
---- a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
-+++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
-@@ -12,9 +12,14 @@ maintainers:
-
- properties:
- compatible:
-- enum:
-- - allwinner,sun6i-a31-mipi-dsi
-- - allwinner,sun50i-a64-mipi-dsi
-+ oneOf:
-+ - enum:
-+ - allwinner,sun6i-a31-mipi-dsi
-+ - allwinner,sun50i-a64-mipi-dsi
-+ - allwinner,sun50i-a100-mipi-dsi
-+ - items:
-+ - const: allwinner,sun20i-d1-mipi-dsi
-+ - const: allwinner,sun50i-a100-mipi-dsi
-
- reg:
- maxItems: 1
-@@ -59,7 +64,6 @@ required:
- - phys
- - phy-names
- - resets
-- - vcc-dsi-supply
- - port
-
- allOf:
-@@ -68,7 +72,9 @@ allOf:
- properties:
- compatible:
- contains:
-- const: allwinner,sun6i-a31-mipi-dsi
-+ enum:
-+ - allwinner,sun6i-a31-mipi-dsi
-+ - allwinner,sun50i-a100-mipi-dsi
-
- then:
- properties:
-@@ -83,6 +89,18 @@ allOf:
- clocks:
- maxItems: 1
-
-+ - if:
-+ properties:
-+ compatible:
-+ contains:
-+ enum:
-+ - allwinner,sun6i-a31-mipi-dsi
-+ - allwinner,sun50i-a64-mipi-dsi
-+
-+ then:
-+ required:
-+ - vcc-dsi-supply
-+
- unevaluatedProperties: false
-
- examples:
+++ /dev/null
-From 28e64e830ef487b400b3b943fa3bda83dfb2a937 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Tue, 9 Aug 2022 22:03:42 -0500
-Subject: [PATCH 096/117] drm/sun4i: dsi: Add a variant structure
-
-Replace the ad-hoc calls to of_device_is_compatible() with a structure
-describing the differences between variants. This is in preparation for
-adding more variants to the driver.
-
-Series-changes: 2
- - Add the variant check to the probe error path
-
-Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 53 +++++++++++++++++---------
- drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h | 7 ++++
- 2 files changed, 42 insertions(+), 18 deletions(-)
-
---- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
-+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
-@@ -1101,12 +1101,16 @@ static const struct component_ops sun6i_
-
- static int sun6i_dsi_probe(struct platform_device *pdev)
- {
-+ const struct sun6i_dsi_variant *variant;
- struct device *dev = &pdev->dev;
-- const char *bus_clk_name = NULL;
- struct sun6i_dsi *dsi;
- void __iomem *base;
- int ret;
-
-+ variant = device_get_match_data(dev);
-+ if (!variant)
-+ return -EINVAL;
-+
- dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
- if (!dsi)
- return -ENOMEM;
-@@ -1114,10 +1118,7 @@ static int sun6i_dsi_probe(struct platfo
- dsi->dev = dev;
- dsi->host.ops = &sun6i_dsi_host_ops;
- dsi->host.dev = dev;
--
-- if (of_device_is_compatible(dev->of_node,
-- "allwinner,sun6i-a31-mipi-dsi"))
-- bus_clk_name = "bus";
-+ dsi->variant = variant;
-
- base = devm_platform_ioremap_resource(pdev, 0);
- if (IS_ERR(base)) {
-@@ -1142,7 +1143,7 @@ static int sun6i_dsi_probe(struct platfo
- return PTR_ERR(dsi->regs);
- }
-
-- dsi->bus_clk = devm_clk_get(dev, bus_clk_name);
-+ dsi->bus_clk = devm_clk_get(dev, variant->has_mod_clk ? "bus" : NULL);
- if (IS_ERR(dsi->bus_clk))
- return dev_err_probe(dev, PTR_ERR(dsi->bus_clk),
- "Couldn't get the DSI bus clock\n");
-@@ -1151,21 +1152,21 @@ static int sun6i_dsi_probe(struct platfo
- if (ret)
- return ret;
-
-- if (of_device_is_compatible(dev->of_node,
-- "allwinner,sun6i-a31-mipi-dsi")) {
-+ if (variant->has_mod_clk) {
- dsi->mod_clk = devm_clk_get(dev, "mod");
- if (IS_ERR(dsi->mod_clk)) {
- dev_err(dev, "Couldn't get the DSI mod clock\n");
- ret = PTR_ERR(dsi->mod_clk);
- goto err_attach_clk;
- }
-- }
-
-- /*
-- * In order to operate properly, that clock seems to be always
-- * set to 297MHz.
-- */
-- clk_set_rate_exclusive(dsi->mod_clk, 297000000);
-+ /*
-+ * In order to operate properly, the module clock on the
-+ * A31 variant always seems to be set to 297MHz.
-+ */
-+ if (variant->set_mod_clk)
-+ clk_set_rate_exclusive(dsi->mod_clk, 297000000);
-+ }
-
- dsi->dphy = devm_phy_get(dev, "dphy");
- if (IS_ERR(dsi->dphy)) {
-@@ -1191,7 +1192,8 @@ static int sun6i_dsi_probe(struct platfo
- err_remove_dsi_host:
- mipi_dsi_host_unregister(&dsi->host);
- err_unprotect_clk:
-- clk_rate_exclusive_put(dsi->mod_clk);
-+ if (dsi->variant->has_mod_clk && dsi->variant->set_mod_clk)
-+ clk_rate_exclusive_put(dsi->mod_clk);
- err_attach_clk:
- regmap_mmio_detach_clk(dsi->regs);
-
-@@ -1205,16 +1207,31 @@ static int sun6i_dsi_remove(struct platf
-
- component_del(&pdev->dev, &sun6i_dsi_ops);
- mipi_dsi_host_unregister(&dsi->host);
-- clk_rate_exclusive_put(dsi->mod_clk);
-+ if (dsi->variant->has_mod_clk && dsi->variant->set_mod_clk)
-+ clk_rate_exclusive_put(dsi->mod_clk);
-
- regmap_mmio_detach_clk(dsi->regs);
-
- return 0;
- }
-
-+static const struct sun6i_dsi_variant sun6i_a31_mipi_dsi_variant = {
-+ .has_mod_clk = true,
-+ .set_mod_clk = true,
-+};
-+
-+static const struct sun6i_dsi_variant sun50i_a64_mipi_dsi_variant = {
-+};
-+
- static const struct of_device_id sun6i_dsi_of_table[] = {
-- { .compatible = "allwinner,sun6i-a31-mipi-dsi" },
-- { .compatible = "allwinner,sun50i-a64-mipi-dsi" },
-+ {
-+ .compatible = "allwinner,sun6i-a31-mipi-dsi",
-+ .data = &sun6i_a31_mipi_dsi_variant,
-+ },
-+ {
-+ .compatible = "allwinner,sun50i-a64-mipi-dsi",
-+ .data = &sun50i_a64_mipi_dsi_variant,
-+ },
- { }
- };
- MODULE_DEVICE_TABLE(of, sun6i_dsi_of_table);
---- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h
-+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h
-@@ -15,6 +15,11 @@
-
- #define SUN6I_DSI_TCON_DIV 4
-
-+struct sun6i_dsi_variant {
-+ bool has_mod_clk;
-+ bool set_mod_clk;
-+};
-+
- struct sun6i_dsi {
- struct drm_connector connector;
- struct drm_encoder encoder;
-@@ -31,6 +36,8 @@ struct sun6i_dsi {
- struct mipi_dsi_device *device;
- struct drm_device *drm;
- struct drm_panel *panel;
-+
-+ const struct sun6i_dsi_variant *variant;
- };
-
- static inline struct sun6i_dsi *host_to_sun6i_dsi(struct mipi_dsi_host *host)
+++ /dev/null
-From 713029c6a33df9218d11593bc5be79420715633f Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 7 Aug 2022 11:06:22 -0500
-Subject: [PATCH 097/117] drm/sun4i: dsi: Add the A100 variant
-
-The A100 variant of the MIPI DSI controller now gets its module clock
-from the TCON via the TCON TOP, so the clock rate cannot be set to a
-fixed value. Otherwise, it appears to be the same as the A31 variant.
-
-Cover-letter:
-drm/sun4i: dsi: Support the A100/D1 controller variant
-This series adds support for the digital part of the DSI controller
-found in the A100 and D1 SoCs (plus T7, which is not supported by
-mainline Linux). There are two changes to the hardware integration:
- 1) the module clock routes through the TCON TOP, and
- 2) the separate I/O domain is removed.
-
-The actual register interface appears to be the same as before. The
-register definitions in the D1 BSP exactly match the A64 BSP.
-
-The BSP describes this as the "40nm" DSI controller variant. There is
-also a "28nm" variant with a different register interface; that one is
-found in a different subset of SoCs (V5 and A50).
-
-A100/D1 also come with an updated DPHY, described by the BSP as a
-"combo" PHY, which is now also used for LVDS channel 0. (LVDS and DSI
-share the same pins on Port D.) Since that is a different subsystem,
-I am sending that as a separate series.
-END
-
-Series-to: Chen-Yu Tsai <wens@csie.org>
-Series-to: Jernej Skrabec <jernej.skrabec@gmail.com>
-Series-to: Maxime Ripard <mripard@kernel.org>
-
-Series-version: 2
-
-Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
-+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
-@@ -1223,6 +1223,10 @@ static const struct sun6i_dsi_variant su
- static const struct sun6i_dsi_variant sun50i_a64_mipi_dsi_variant = {
- };
-
-+static const struct sun6i_dsi_variant sun50i_a100_mipi_dsi_variant = {
-+ .has_mod_clk = true,
-+};
-+
- static const struct of_device_id sun6i_dsi_of_table[] = {
- {
- .compatible = "allwinner,sun6i-a31-mipi-dsi",
-@@ -1232,6 +1236,10 @@ static const struct of_device_id sun6i_d
- .compatible = "allwinner,sun50i-a64-mipi-dsi",
- .data = &sun50i_a64_mipi_dsi_variant,
- },
-+ {
-+ .compatible = "allwinner,sun50i-a100-mipi-dsi",
-+ .data = &sun50i_a100_mipi_dsi_variant,
-+ },
- { }
- };
- MODULE_DEVICE_TABLE(of, sun6i_dsi_of_table);
+++ /dev/null
-From b6af4b7f6f75904509747c08e87d91c1bb607bd4 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Thu, 22 Sep 2022 00:39:36 -0500
-Subject: [PATCH 098/117] riscv: Move cast inside kernel_mapping_[pv]a_to_[vp]a
-
-Before commit 44c922572952 ("RISC-V: enable XIP"), these macros cast
-their argument to unsigned long. That commit moved the cast after an
-assignment to an unsigned long variable, rendering it ineffectual.
-Move the cast back, so we can remove the cast at each call site.
-
-Series-to: Palmer Dabbelt <palmer@dabbelt.com>
-Series-to: linux-riscv@lists.infradead.org
-
-Series-version: 2
-
-Reviewed-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
-Reviewed-by: Heiko Stuebner <heiko@sntech.de>
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- arch/riscv/include/asm/page.h | 18 +++++++++---------
- arch/riscv/mm/init.c | 16 ++++++++--------
- 2 files changed, 17 insertions(+), 17 deletions(-)
-
---- a/arch/riscv/include/asm/page.h
-+++ b/arch/riscv/include/asm/page.h
-@@ -123,20 +123,20 @@ extern phys_addr_t phys_ram_base;
- ((x) >= PAGE_OFFSET && (!IS_ENABLED(CONFIG_64BIT) || (x) < PAGE_OFFSET + KERN_VIRT_SIZE))
-
- #define linear_mapping_pa_to_va(x) ((void *)((unsigned long)(x) + kernel_map.va_pa_offset))
--#define kernel_mapping_pa_to_va(y) ({ \
-- unsigned long _y = y; \
-- (IS_ENABLED(CONFIG_XIP_KERNEL) && _y < phys_ram_base) ? \
-- (void *)((unsigned long)(_y) + kernel_map.va_kernel_xip_pa_offset) : \
-- (void *)((unsigned long)(_y) + kernel_map.va_kernel_pa_offset + XIP_OFFSET); \
-+#define kernel_mapping_pa_to_va(y) ({ \
-+ unsigned long _y = (unsigned long)(y); \
-+ (IS_ENABLED(CONFIG_XIP_KERNEL) && _y < phys_ram_base) ? \
-+ (void *)(_y + kernel_map.va_kernel_xip_pa_offset) : \
-+ (void *)(_y + kernel_map.va_kernel_pa_offset + XIP_OFFSET); \
- })
- #define __pa_to_va_nodebug(x) linear_mapping_pa_to_va(x)
-
- #define linear_mapping_va_to_pa(x) ((unsigned long)(x) - kernel_map.va_pa_offset)
- #define kernel_mapping_va_to_pa(y) ({ \
-- unsigned long _y = y; \
-- (IS_ENABLED(CONFIG_XIP_KERNEL) && _y < kernel_map.virt_addr + XIP_OFFSET) ? \
-- ((unsigned long)(_y) - kernel_map.va_kernel_xip_pa_offset) : \
-- ((unsigned long)(_y) - kernel_map.va_kernel_pa_offset - XIP_OFFSET); \
-+ unsigned long _y = (unsigned long)(y); \
-+ (IS_ENABLED(CONFIG_XIP_KERNEL) && _y < kernel_map.virt_addr + XIP_OFFSET) ? \
-+ (_y - kernel_map.va_kernel_xip_pa_offset) : \
-+ (_y - kernel_map.va_kernel_pa_offset - XIP_OFFSET); \
- })
-
- #define __va_to_pa_nodebug(x) ({ \
---- a/arch/riscv/mm/init.c
-+++ b/arch/riscv/mm/init.c
-@@ -903,15 +903,15 @@ static void __init pt_ops_set_early(void
- */
- static void __init pt_ops_set_fixmap(void)
- {
-- pt_ops.alloc_pte = kernel_mapping_pa_to_va((uintptr_t)alloc_pte_fixmap);
-- pt_ops.get_pte_virt = kernel_mapping_pa_to_va((uintptr_t)get_pte_virt_fixmap);
-+ pt_ops.alloc_pte = kernel_mapping_pa_to_va(alloc_pte_fixmap);
-+ pt_ops.get_pte_virt = kernel_mapping_pa_to_va(get_pte_virt_fixmap);
- #ifndef __PAGETABLE_PMD_FOLDED
-- pt_ops.alloc_pmd = kernel_mapping_pa_to_va((uintptr_t)alloc_pmd_fixmap);
-- pt_ops.get_pmd_virt = kernel_mapping_pa_to_va((uintptr_t)get_pmd_virt_fixmap);
-- pt_ops.alloc_pud = kernel_mapping_pa_to_va((uintptr_t)alloc_pud_fixmap);
-- pt_ops.get_pud_virt = kernel_mapping_pa_to_va((uintptr_t)get_pud_virt_fixmap);
-- pt_ops.alloc_p4d = kernel_mapping_pa_to_va((uintptr_t)alloc_p4d_fixmap);
-- pt_ops.get_p4d_virt = kernel_mapping_pa_to_va((uintptr_t)get_p4d_virt_fixmap);
-+ pt_ops.alloc_pmd = kernel_mapping_pa_to_va(alloc_pmd_fixmap);
-+ pt_ops.get_pmd_virt = kernel_mapping_pa_to_va(get_pmd_virt_fixmap);
-+ pt_ops.alloc_pud = kernel_mapping_pa_to_va(alloc_pud_fixmap);
-+ pt_ops.get_pud_virt = kernel_mapping_pa_to_va(get_pud_virt_fixmap);
-+ pt_ops.alloc_p4d = kernel_mapping_pa_to_va(alloc_p4d_fixmap);
-+ pt_ops.get_p4d_virt = kernel_mapping_pa_to_va(get_p4d_virt_fixmap);
- #endif
- }
-
+++ /dev/null
-From 20a204b31291befcd583f97dafc0a827f3bc7f00 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Fri, 12 Aug 2022 01:37:16 -0500
-Subject: [PATCH 099/117] dt-bindings: sun6i-a31-mipi-dphy: Add the interrupts
- property
-
-The sun6i DPHY can generate several interrupts, mostly for reporting
-error conditions, but also for detecting BTA and UPLS sequences.
-Document this capability in order to accurately describe the hardware.
-
-The DPHY has no interrupt number provided in the vendor documentation
-because its interrupt line is shared with the DSI controller.
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- .../bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml
-+++ b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml
-@@ -24,6 +24,9 @@ properties:
- reg:
- maxItems: 1
-
-+ interrupts:
-+ maxItems: 1
-+
- clocks:
- items:
- - description: Bus Clock
-@@ -53,6 +56,7 @@ required:
- - "#phy-cells"
- - compatible
- - reg
-+ - interrupts
- - clocks
- - clock-names
- - resets
+++ /dev/null
-From 7d47c62b378a4dbbf3e46a80c7b03966f8964da1 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Fri, 12 Aug 2022 02:24:14 -0500
-Subject: [PATCH 100/117] ARM: dts: sun8i: a33: Add DPHY interrupt
-
-The DPHY has an interrupt line which is shared with the DSI controller.
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- arch/arm/boot/dts/sun8i-a33.dtsi | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm/boot/dts/sun8i-a33.dtsi
-+++ b/arch/arm/boot/dts/sun8i-a33.dtsi
-@@ -278,6 +278,7 @@
- dphy: d-phy@1ca1000 {
- compatible = "allwinner,sun6i-a31-mipi-dphy";
- reg = <0x01ca1000 0x1000>;
-+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_MIPI_DSI>,
- <&ccu CLK_DSI_DPHY>;
- clock-names = "bus", "mod";
+++ /dev/null
-From 11d78fce09e80ec246016c19ecc28a724e1e5530 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Fri, 12 Aug 2022 02:25:55 -0500
-Subject: [PATCH 101/117] arm64: dts: allwinner: a64: Add DPHY interrupt
-
-The DPHY has an interrupt line which is shared with the DSI controller.
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
-@@ -1199,6 +1199,7 @@
- compatible = "allwinner,sun50i-a64-mipi-dphy",
- "allwinner,sun6i-a31-mipi-dphy";
- reg = <0x01ca1000 0x1000>;
-+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_MIPI_DSI>,
- <&ccu CLK_DSI_DPHY>;
- clock-names = "bus", "mod";
+++ /dev/null
-From c7fa1be12bf0ef02f5557dd1d1100d25af4e34f5 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 7 Aug 2022 11:00:12 -0500
-Subject: [PATCH 102/117] dt-bindings: sun6i-a31-mipi-dphy: Add the A100 DPHY
- variant
-
-A100 features an updated DPHY, which moves PLL control inside the DPHY
-register space. (Previously PLL-MIPI was controlled from the CCU. This
-does not affect the "clocks" property because the link between PLL-MIPI
-and the DPHY was never represented in the devicetree.) It also requires
-a modified analog power-on sequence. Finally, the new DPHY adds support
-for operating as an LVDS PHY. D1 uses this same variant.
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- .../bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml
-+++ b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml
-@@ -17,9 +17,13 @@ properties:
- compatible:
- oneOf:
- - const: allwinner,sun6i-a31-mipi-dphy
-+ - const: allwinner,sun50i-a100-mipi-dphy
- - items:
- - const: allwinner,sun50i-a64-mipi-dphy
- - const: allwinner,sun6i-a31-mipi-dphy
-+ - items:
-+ - const: allwinner,sun20i-d1-mipi-dphy
-+ - const: allwinner,sun50i-a100-mipi-dphy
-
- reg:
- maxItems: 1
+++ /dev/null
-From 27c0c2cbe7b30b907b031016d2cd15fe9505cb1b Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 7 Aug 2022 12:11:53 -0500
-Subject: [PATCH 103/117] phy: allwinner: phy-sun6i-mipi-dphy: Make RX support
- optional
-
-While all variants of the DPHY likely support RX mode, the new variant
-in the A100 is not used in this direction by the BSP, and it has some
-analog register changes, so its RX power-on sequence is unknown. To be
-safe, limit RX support to variants where the power-on sequence is known.
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- drivers/phy/allwinner/phy-sun6i-mipi-dphy.c | 25 +++++++++++++++++++--
- 1 file changed, 23 insertions(+), 2 deletions(-)
-
---- a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
-+++ b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
-@@ -114,6 +114,10 @@ enum sun6i_dphy_direction {
- SUN6I_DPHY_DIRECTION_RX,
- };
-
-+struct sun6i_dphy_variant {
-+ bool supports_rx;
-+};
-+
- struct sun6i_dphy {
- struct clk *bus_clk;
- struct clk *mod_clk;
-@@ -123,6 +127,7 @@ struct sun6i_dphy {
- struct phy *phy;
- struct phy_configure_opts_mipi_dphy config;
-
-+ const struct sun6i_dphy_variant *variant;
- enum sun6i_dphy_direction direction;
- };
-
-@@ -409,6 +414,10 @@ static int sun6i_dphy_probe(struct platf
- if (!dphy)
- return -ENOMEM;
-
-+ dphy->variant = device_get_match_data(&pdev->dev);
-+ if (!dphy->variant)
-+ return -EINVAL;
-+
- regs = devm_platform_ioremap_resource(pdev, 0);
- if (IS_ERR(regs)) {
- dev_err(&pdev->dev, "Couldn't map the DPHY encoder registers\n");
-@@ -445,8 +454,13 @@ static int sun6i_dphy_probe(struct platf
- ret = of_property_read_string(pdev->dev.of_node, "allwinner,direction",
- &direction);
-
-- if (!ret && !strncmp(direction, "rx", 2))
-+ if (!ret && !strncmp(direction, "rx", 2)) {
-+ if (!dphy->variant->supports_rx) {
-+ dev_err(&pdev->dev, "RX not supported on this variant\n");
-+ return -EOPNOTSUPP;
-+ }
- dphy->direction = SUN6I_DPHY_DIRECTION_RX;
-+ }
-
- phy_set_drvdata(dphy->phy, dphy);
- phy_provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate);
-@@ -454,8 +468,15 @@ static int sun6i_dphy_probe(struct platf
- return PTR_ERR_OR_ZERO(phy_provider);
- }
-
-+static const struct sun6i_dphy_variant sun6i_a31_mipi_dphy_variant = {
-+ .supports_rx = true,
-+};
-+
- static const struct of_device_id sun6i_dphy_of_table[] = {
-- { .compatible = "allwinner,sun6i-a31-mipi-dphy" },
-+ {
-+ .compatible = "allwinner,sun6i-a31-mipi-dphy",
-+ .data = &sun6i_a31_mipi_dphy_variant,
-+ },
- { }
- };
- MODULE_DEVICE_TABLE(of, sun6i_dphy_of_table);
+++ /dev/null
-From 16993169c82c2c57e1df1e7f4598a7c2aa565fe2 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 7 Aug 2022 11:12:02 -0500
-Subject: [PATCH 104/117] phy: allwinner: phy-sun6i-mipi-dphy: Set enable bit
- last
-
-The A100 variant of the DPHY requires configuring the analog registers
-before setting the global enable bit. Since this order also works on the
-other variants, always use it, to minimize the differences between them.
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- drivers/phy/allwinner/phy-sun6i-mipi-dphy.c | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
-+++ b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
-@@ -183,10 +183,6 @@ static int sun6i_dphy_tx_power_on(struct
- SUN6I_DPHY_TX_TIME4_HS_TX_ANA0(3) |
- SUN6I_DPHY_TX_TIME4_HS_TX_ANA1(3));
-
-- regmap_write(dphy->regs, SUN6I_DPHY_GCTL_REG,
-- SUN6I_DPHY_GCTL_LANE_NUM(dphy->config.lanes) |
-- SUN6I_DPHY_GCTL_EN);
--
- regmap_write(dphy->regs, SUN6I_DPHY_ANA0_REG,
- SUN6I_DPHY_ANA0_REG_PWS |
- SUN6I_DPHY_ANA0_REG_DMPC |
-@@ -244,6 +240,10 @@ static int sun6i_dphy_tx_power_on(struct
- SUN6I_DPHY_ANA2_EN_P2S_CPU_MASK,
- SUN6I_DPHY_ANA2_EN_P2S_CPU(lanes_mask));
-
-+ regmap_write(dphy->regs, SUN6I_DPHY_GCTL_REG,
-+ SUN6I_DPHY_GCTL_LANE_NUM(dphy->config.lanes) |
-+ SUN6I_DPHY_GCTL_EN);
-+
- return 0;
- }
-
+++ /dev/null
-From b953c09bde508c2edd8acd95abba8542b6cebff6 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 7 Aug 2022 11:44:09 -0500
-Subject: [PATCH 105/117] phy: allwinner: phy-sun6i-mipi-dphy: Add a variant
- power-on hook
-
-The A100 variant uses the same values for the timing registers, and it
-uses the same final power-on sequence, but it needs a different analog
-register configuration in the middle. Support this by moving the
-variant-specific parts to a hook provided by the variant.
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- drivers/phy/allwinner/phy-sun6i-mipi-dphy.c | 59 ++++++++++++---------
- 1 file changed, 35 insertions(+), 24 deletions(-)
-
---- a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
-+++ b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
-@@ -114,7 +114,10 @@ enum sun6i_dphy_direction {
- SUN6I_DPHY_DIRECTION_RX,
- };
-
-+struct sun6i_dphy;
-+
- struct sun6i_dphy_variant {
-+ void (*tx_power_on)(struct sun6i_dphy *dphy);
- bool supports_rx;
- };
-
-@@ -156,33 +159,10 @@ static int sun6i_dphy_configure(struct p
- return 0;
- }
-
--static int sun6i_dphy_tx_power_on(struct sun6i_dphy *dphy)
-+static void sun6i_a31_mipi_dphy_tx_power_on(struct sun6i_dphy *dphy)
- {
- u8 lanes_mask = GENMASK(dphy->config.lanes - 1, 0);
-
-- regmap_write(dphy->regs, SUN6I_DPHY_TX_CTL_REG,
-- SUN6I_DPHY_TX_CTL_HS_TX_CLK_CONT);
--
-- regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME0_REG,
-- SUN6I_DPHY_TX_TIME0_LP_CLK_DIV(14) |
-- SUN6I_DPHY_TX_TIME0_HS_PREPARE(6) |
-- SUN6I_DPHY_TX_TIME0_HS_TRAIL(10));
--
-- regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME1_REG,
-- SUN6I_DPHY_TX_TIME1_CLK_PREPARE(7) |
-- SUN6I_DPHY_TX_TIME1_CLK_ZERO(50) |
-- SUN6I_DPHY_TX_TIME1_CLK_PRE(3) |
-- SUN6I_DPHY_TX_TIME1_CLK_POST(10));
--
-- regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME2_REG,
-- SUN6I_DPHY_TX_TIME2_CLK_TRAIL(30));
--
-- regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME3_REG, 0);
--
-- regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME4_REG,
-- SUN6I_DPHY_TX_TIME4_HS_TX_ANA0(3) |
-- SUN6I_DPHY_TX_TIME4_HS_TX_ANA1(3));
--
- regmap_write(dphy->regs, SUN6I_DPHY_ANA0_REG,
- SUN6I_DPHY_ANA0_REG_PWS |
- SUN6I_DPHY_ANA0_REG_DMPC |
-@@ -214,6 +194,36 @@ static int sun6i_dphy_tx_power_on(struct
- SUN6I_DPHY_ANA3_EN_LDOC |
- SUN6I_DPHY_ANA3_EN_LDOD);
- udelay(1);
-+}
-+
-+static int sun6i_dphy_tx_power_on(struct sun6i_dphy *dphy)
-+{
-+ u8 lanes_mask = GENMASK(dphy->config.lanes - 1, 0);
-+
-+ regmap_write(dphy->regs, SUN6I_DPHY_TX_CTL_REG,
-+ SUN6I_DPHY_TX_CTL_HS_TX_CLK_CONT);
-+
-+ regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME0_REG,
-+ SUN6I_DPHY_TX_TIME0_LP_CLK_DIV(14) |
-+ SUN6I_DPHY_TX_TIME0_HS_PREPARE(6) |
-+ SUN6I_DPHY_TX_TIME0_HS_TRAIL(10));
-+
-+ regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME1_REG,
-+ SUN6I_DPHY_TX_TIME1_CLK_PREPARE(7) |
-+ SUN6I_DPHY_TX_TIME1_CLK_ZERO(50) |
-+ SUN6I_DPHY_TX_TIME1_CLK_PRE(3) |
-+ SUN6I_DPHY_TX_TIME1_CLK_POST(10));
-+
-+ regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME2_REG,
-+ SUN6I_DPHY_TX_TIME2_CLK_TRAIL(30));
-+
-+ regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME3_REG, 0);
-+
-+ regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME4_REG,
-+ SUN6I_DPHY_TX_TIME4_HS_TX_ANA0(3) |
-+ SUN6I_DPHY_TX_TIME4_HS_TX_ANA1(3));
-+
-+ dphy->variant->tx_power_on(dphy);
-
- regmap_update_bits(dphy->regs, SUN6I_DPHY_ANA3_REG,
- SUN6I_DPHY_ANA3_EN_VTTC |
-@@ -469,6 +479,7 @@ static int sun6i_dphy_probe(struct platf
- }
-
- static const struct sun6i_dphy_variant sun6i_a31_mipi_dphy_variant = {
-+ .tx_power_on = sun6i_a31_mipi_dphy_tx_power_on,
- .supports_rx = true,
- };
-
+++ /dev/null
-From 474b608dee5e6285dd1981b00ab568a2f7f15fd0 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Wed, 10 Aug 2022 23:02:06 -0500
-Subject: [PATCH 106/117] phy: allwinner: phy-sun6i-mipi-dphy: Add the A100
- DPHY variant
-
-A100 features an updated DPHY, which moves PLL control inside the DPHY
-register space (previously the PLL was controlled from the CCU). It also
-requires a modified analog power-on sequence. This "combo PHY" can also
-be used as an LVDS PHY, but that is not yet supported by the driver.
-
-Cover-letter:
-phy: allwinner: phy-sun6i-mipi-dphy: Add the A100 DPHY
-This series adds support for the updated DPHY found in a couple of
-recent Allwinner SoCs. The first three patches fix an omission in the
-existing binding. The remaining patches add the new hardware variant.
-END
-
-Series-to: Kishon Vijay Abraham I <kishon@ti.com>
-Series-to: Vinod Koul <vkoul@kernel.org>
-Series-to: Chen-Yu Tsai <wens@csie.org>
-Series-to: Jernej Skrabec <jernej.skrabec@gmail.com>
-Series-to: Maxime Ripard <mripard@kernel.org>
-Series-cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- drivers/phy/allwinner/phy-sun6i-mipi-dphy.c | 143 +++++++++++++++++++-
- 1 file changed, 142 insertions(+), 1 deletion(-)
-
---- a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
-+++ b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
-@@ -70,11 +70,19 @@
-
- #define SUN6I_DPHY_ANA0_REG 0x4c
- #define SUN6I_DPHY_ANA0_REG_PWS BIT(31)
-+#define SUN6I_DPHY_ANA0_REG_PWEND BIT(30)
-+#define SUN6I_DPHY_ANA0_REG_PWENC BIT(29)
- #define SUN6I_DPHY_ANA0_REG_DMPC BIT(28)
- #define SUN6I_DPHY_ANA0_REG_DMPD(n) (((n) & 0xf) << 24)
-+#define SUN6I_DPHY_ANA0_REG_SRXDT(n) (((n) & 0xf) << 20)
-+#define SUN6I_DPHY_ANA0_REG_SRXCK(n) (((n) & 0xf) << 16)
-+#define SUN6I_DPHY_ANA0_REG_SDIV2 BIT(15)
- #define SUN6I_DPHY_ANA0_REG_SLV(n) (((n) & 7) << 12)
- #define SUN6I_DPHY_ANA0_REG_DEN(n) (((n) & 0xf) << 8)
-+#define SUN6I_DPHY_ANA0_REG_PLR(n) (((n) & 0xf) << 4)
- #define SUN6I_DPHY_ANA0_REG_SFB(n) (((n) & 3) << 2)
-+#define SUN6I_DPHY_ANA0_REG_RSD BIT(1)
-+#define SUN6I_DPHY_ANA0_REG_SELSCK BIT(0)
-
- #define SUN6I_DPHY_ANA1_REG 0x50
- #define SUN6I_DPHY_ANA1_REG_VTTMODE BIT(31)
-@@ -97,8 +105,13 @@
- #define SUN6I_DPHY_ANA3_EN_LDOR BIT(18)
-
- #define SUN6I_DPHY_ANA4_REG 0x5c
-+#define SUN6I_DPHY_ANA4_REG_EN_MIPI BIT(31)
-+#define SUN6I_DPHY_ANA4_REG_EN_COMTEST BIT(30)
-+#define SUN6I_DPHY_ANA4_REG_COMTEST(n) (((n) & 3) << 28)
-+#define SUN6I_DPHY_ANA4_REG_IB(n) (((n) & 3) << 25)
- #define SUN6I_DPHY_ANA4_REG_DMPLVC BIT(24)
- #define SUN6I_DPHY_ANA4_REG_DMPLVD(n) (((n) & 0xf) << 20)
-+#define SUN6I_DPHY_ANA4_REG_VTT_SET(n) (((n) & 0x7) << 17)
- #define SUN6I_DPHY_ANA4_REG_CKDV(n) (((n) & 0x1f) << 12)
- #define SUN6I_DPHY_ANA4_REG_TMSC(n) (((n) & 3) << 10)
- #define SUN6I_DPHY_ANA4_REG_TMSD(n) (((n) & 3) << 8)
-@@ -109,6 +122,56 @@
-
- #define SUN6I_DPHY_DBG5_REG 0xf4
-
-+#define SUN50I_DPHY_TX_SLEW_REG0 0xf8
-+#define SUN50I_DPHY_TX_SLEW_REG1 0xfc
-+#define SUN50I_DPHY_TX_SLEW_REG2 0x100
-+
-+#define SUN50I_DPHY_PLL_REG0 0x104
-+#define SUN50I_DPHY_PLL_REG0_CP36_EN BIT(23)
-+#define SUN50I_DPHY_PLL_REG0_LDO_EN BIT(22)
-+#define SUN50I_DPHY_PLL_REG0_EN_LVS BIT(21)
-+#define SUN50I_DPHY_PLL_REG0_PLL_EN BIT(20)
-+#define SUN50I_DPHY_PLL_REG0_P(n) (((n) & 0xf) << 16)
-+#define SUN50I_DPHY_PLL_REG0_N(n) (((n) & 0xff) << 8)
-+#define SUN50I_DPHY_PLL_REG0_NDET BIT(7)
-+#define SUN50I_DPHY_PLL_REG0_TDIV BIT(6)
-+#define SUN50I_DPHY_PLL_REG0_M0(n) (((n) & 3) << 4)
-+#define SUN50I_DPHY_PLL_REG0_M1(n) ((n) & 0xf)
-+
-+#define SUN50I_DPHY_PLL_REG1 0x108
-+#define SUN50I_DPHY_PLL_REG1_UNLOCK_MDSEL(n) (((n) & 3) << 14)
-+#define SUN50I_DPHY_PLL_REG1_LOCKMDSEL BIT(13)
-+#define SUN50I_DPHY_PLL_REG1_LOCKDET_EN BIT(12)
-+#define SUN50I_DPHY_PLL_REG1_VSETA(n) (((n) & 0x7) << 9)
-+#define SUN50I_DPHY_PLL_REG1_VSETD(n) (((n) & 0x7) << 6)
-+#define SUN50I_DPHY_PLL_REG1_LPF_SW BIT(5)
-+#define SUN50I_DPHY_PLL_REG1_ICP_SEL(n) (((n) & 3) << 3)
-+#define SUN50I_DPHY_PLL_REG1_ATEST_SEL(n) (((n) & 3) << 1)
-+#define SUN50I_DPHY_PLL_REG1_TEST_EN BIT(0)
-+
-+#define SUN50I_DPHY_PLL_REG2 0x10c
-+#define SUN50I_DPHY_PLL_REG2_SDM_EN BIT(31)
-+#define SUN50I_DPHY_PLL_REG2_FF_EN BIT(30)
-+#define SUN50I_DPHY_PLL_REG2_SS_EN BIT(29)
-+#define SUN50I_DPHY_PLL_REG2_SS_FRAC(n) (((n) & 0x1ff) << 20)
-+#define SUN50I_DPHY_PLL_REG2_SS_INT(n) (((n) & 0xff) << 12)
-+#define SUN50I_DPHY_PLL_REG2_FRAC(n) ((n) & 0xfff)
-+
-+#define SUN50I_COMBO_PHY_REG0 0x110
-+#define SUN50I_COMBO_PHY_REG0_EN_TEST_COMBOLDO BIT(5)
-+#define SUN50I_COMBO_PHY_REG0_EN_TEST_0P8 BIT(4)
-+#define SUN50I_COMBO_PHY_REG0_EN_MIPI BIT(3)
-+#define SUN50I_COMBO_PHY_REG0_EN_LVDS BIT(2)
-+#define SUN50I_COMBO_PHY_REG0_EN_COMBOLDO BIT(1)
-+#define SUN50I_COMBO_PHY_REG0_EN_CP BIT(0)
-+
-+#define SUN50I_COMBO_PHY_REG1 0x114
-+#define SUN50I_COMBO_PHY_REG2_REG_VREF1P6(n) (((n) & 0x7) << 4)
-+#define SUN50I_COMBO_PHY_REG2_REG_VREF0P8(n) ((n) & 0x7)
-+
-+#define SUN50I_COMBO_PHY_REG2 0x118
-+#define SUN50I_COMBO_PHY_REG2_HS_STOP_DLY(n) ((n) & 0xff)
-+
- enum sun6i_dphy_direction {
- SUN6I_DPHY_DIRECTION_TX,
- SUN6I_DPHY_DIRECTION_RX,
-@@ -196,6 +259,76 @@ static void sun6i_a31_mipi_dphy_tx_power
- udelay(1);
- }
-
-+static void sun50i_a100_mipi_dphy_tx_power_on(struct sun6i_dphy *dphy)
-+{
-+ unsigned long mipi_symbol_rate = dphy->config.hs_clk_rate;
-+ unsigned int div, n;
-+
-+ regmap_write(dphy->regs, SUN6I_DPHY_ANA4_REG,
-+ SUN6I_DPHY_ANA4_REG_IB(2) |
-+ SUN6I_DPHY_ANA4_REG_DMPLVD(4) |
-+ SUN6I_DPHY_ANA4_REG_VTT_SET(3) |
-+ SUN6I_DPHY_ANA4_REG_CKDV(3) |
-+ SUN6I_DPHY_ANA4_REG_TMSD(1) |
-+ SUN6I_DPHY_ANA4_REG_TMSC(1) |
-+ SUN6I_DPHY_ANA4_REG_TXPUSD(2) |
-+ SUN6I_DPHY_ANA4_REG_TXPUSC(3) |
-+ SUN6I_DPHY_ANA4_REG_TXDNSD(2) |
-+ SUN6I_DPHY_ANA4_REG_TXDNSC(3));
-+
-+ regmap_update_bits(dphy->regs, SUN6I_DPHY_ANA2_REG,
-+ SUN6I_DPHY_ANA2_EN_CK_CPU,
-+ SUN6I_DPHY_ANA2_EN_CK_CPU);
-+
-+ regmap_update_bits(dphy->regs, SUN6I_DPHY_ANA2_REG,
-+ SUN6I_DPHY_ANA2_REG_ENIB,
-+ SUN6I_DPHY_ANA2_REG_ENIB);
-+
-+ regmap_write(dphy->regs, SUN6I_DPHY_ANA3_REG,
-+ SUN6I_DPHY_ANA3_EN_LDOR |
-+ SUN6I_DPHY_ANA3_EN_LDOC |
-+ SUN6I_DPHY_ANA3_EN_LDOD);
-+
-+ regmap_write(dphy->regs, SUN6I_DPHY_ANA0_REG,
-+ SUN6I_DPHY_ANA0_REG_PLR(4) |
-+ SUN6I_DPHY_ANA0_REG_SFB(1));
-+
-+ regmap_write(dphy->regs, SUN50I_COMBO_PHY_REG0,
-+ SUN50I_COMBO_PHY_REG0_EN_CP);
-+
-+ /* Choose a divider to limit the VCO frequency to around 2 GHz. */
-+ div = 16 >> order_base_2(DIV_ROUND_UP(mipi_symbol_rate, 264000000));
-+ n = mipi_symbol_rate * div / 24000000;
-+
-+ regmap_write(dphy->regs, SUN50I_DPHY_PLL_REG0,
-+ SUN50I_DPHY_PLL_REG0_CP36_EN |
-+ SUN50I_DPHY_PLL_REG0_LDO_EN |
-+ SUN50I_DPHY_PLL_REG0_EN_LVS |
-+ SUN50I_DPHY_PLL_REG0_PLL_EN |
-+ SUN50I_DPHY_PLL_REG0_NDET |
-+ SUN50I_DPHY_PLL_REG0_P((div - 1) % 8) |
-+ SUN50I_DPHY_PLL_REG0_N(n) |
-+ SUN50I_DPHY_PLL_REG0_M0((div - 1) / 8) |
-+ SUN50I_DPHY_PLL_REG0_M1(2));
-+
-+ /* Disable sigma-delta modulation. */
-+ regmap_write(dphy->regs, SUN50I_DPHY_PLL_REG2, 0);
-+
-+ regmap_update_bits(dphy->regs, SUN6I_DPHY_ANA4_REG,
-+ SUN6I_DPHY_ANA4_REG_EN_MIPI,
-+ SUN6I_DPHY_ANA4_REG_EN_MIPI);
-+
-+ regmap_update_bits(dphy->regs, SUN50I_COMBO_PHY_REG0,
-+ SUN50I_COMBO_PHY_REG0_EN_MIPI |
-+ SUN50I_COMBO_PHY_REG0_EN_COMBOLDO,
-+ SUN50I_COMBO_PHY_REG0_EN_MIPI |
-+ SUN50I_COMBO_PHY_REG0_EN_COMBOLDO);
-+
-+ regmap_write(dphy->regs, SUN50I_COMBO_PHY_REG2,
-+ SUN50I_COMBO_PHY_REG2_HS_STOP_DLY(20));
-+ udelay(1);
-+}
-+
- static int sun6i_dphy_tx_power_on(struct sun6i_dphy *dphy)
- {
- u8 lanes_mask = GENMASK(dphy->config.lanes - 1, 0);
-@@ -408,7 +541,7 @@ static const struct regmap_config sun6i_
- .reg_bits = 32,
- .val_bits = 32,
- .reg_stride = 4,
-- .max_register = SUN6I_DPHY_DBG5_REG,
-+ .max_register = SUN50I_COMBO_PHY_REG2,
- .name = "mipi-dphy",
- };
-
-@@ -483,11 +616,19 @@ static const struct sun6i_dphy_variant s
- .supports_rx = true,
- };
-
-+static const struct sun6i_dphy_variant sun50i_a100_mipi_dphy_variant = {
-+ .tx_power_on = sun50i_a100_mipi_dphy_tx_power_on,
-+};
-+
- static const struct of_device_id sun6i_dphy_of_table[] = {
- {
- .compatible = "allwinner,sun6i-a31-mipi-dphy",
- .data = &sun6i_a31_mipi_dphy_variant,
- },
-+ {
-+ .compatible = "allwinner,sun50i-a100-mipi-dphy",
-+ .data = &sun50i_a100_mipi_dphy_variant,
-+ },
- { }
- };
- MODULE_DEVICE_TABLE(of, sun6i_dphy_of_table);
+++ /dev/null
-From 5bf84a1a0a282a18bf9dd2d752537525aefc2e05 Mon Sep 17 00:00:00 2001
-From: Max Fierke <max@maxfierke.com>
-Date: Wed, 1 Jun 2022 00:17:48 -0500
-Subject: [PATCH 107/117] drm: panel: Add driver for Clockwork cwd686 panel
-
-The Clockwork DevTerm (all models) uses a 6.86" IPS display
-of unknown provenance, which uses the Chipone ICNL9707 IC driver.
-
-The display panel I have has two model numbers: TXW686001 and WTL068601G,
-but cannot find any manufacturer associated with either, so opting for the
-Clockwork model number.
-
-This driver is based on the GPL-licensed driver released by Clockwork,
-authored by Pinfan Zhu, with some additional cleanup, rotation support,
-and display sleep re-enabling done by me.
-
-Original driver here for reference: https://github.com/clockworkpi/DevTerm/blob/main/Code/patch/armbian_build_a06/patch/kernel-004-panel.patch
-Display IC datasheet provided here: https://github.com/clockworkpi/DevTerm/blob/main/Schematics/ICNL9707_Datasheet.pdf
-
-Signed-off-by: Max Fierke <max@maxfierke.com>
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- drivers/gpu/drm/panel/Kconfig | 12 +
- drivers/gpu/drm/panel/Makefile | 1 +
- .../gpu/drm/panel/panel-clockwork-cwd686.c | 456 ++++++++++++++++++
- 3 files changed, 469 insertions(+)
- create mode 100644 drivers/gpu/drm/panel/panel-clockwork-cwd686.c
-
---- a/drivers/gpu/drm/panel/Kconfig
-+++ b/drivers/gpu/drm/panel/Kconfig
-@@ -68,6 +68,18 @@ config DRM_PANEL_BOE_TV101WUM_NL6
- Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
- 45NA WUXGA PANEL DSI Video Mode panel
-
-+config DRM_PANEL_CLOCKWORK_CWD686
-+ tristate "Clockwork CWD686 panel"
-+ depends on OF
-+ depends on DRM_MIPI_DSI
-+ depends on BACKLIGHT_CLASS_DEVICE
-+ help
-+ Say Y here if you want to enable support for the Clockwork CWD686
-+ ICNL9707-based panel, e.g. as used within the Clockwork DevTerm.
-+ The panel has a 480x1280 resolution and uses 24 bit RGB per pixel.
-+
-+ To compile this driver as a module, choose M here.
-+
- config DRM_PANEL_DSI_CM
- tristate "Generic DSI command mode panels"
- depends on OF
---- a/drivers/gpu/drm/panel/Makefile
-+++ b/drivers/gpu/drm/panel/Makefile
-@@ -5,6 +5,7 @@ obj-$(CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_N
- obj-$(CONFIG_DRM_PANEL_BOE_BF060Y8M_AJ0) += panel-boe-bf060y8m-aj0.o
- obj-$(CONFIG_DRM_PANEL_BOE_HIMAX8279D) += panel-boe-himax8279d.o
- obj-$(CONFIG_DRM_PANEL_BOE_TV101WUM_NL6) += panel-boe-tv101wum-nl6.o
-+obj-$(CONFIG_DRM_PANEL_CLOCKWORK_CWD686) += panel-clockwork-cwd686.o
- obj-$(CONFIG_DRM_PANEL_DSI_CM) += panel-dsi-cm.o
- obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o
- obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o
---- /dev/null
-+++ b/drivers/gpu/drm/panel/panel-clockwork-cwd686.c
-@@ -0,0 +1,456 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+/*
-+ * Copyright (c) 2021 Clockwork Tech LLC
-+ * Copyright (c) 2021-2022 Max Fierke <max@maxfierke.com>
-+ *
-+ * Based on Pinfan Zhu's work on panel-cwd686.c for ClockworkPi's 5.10 BSP
-+ */
-+
-+#include <drm/drm_modes.h>
-+#include <drm/drm_mipi_dsi.h>
-+#include <drm/drm_panel.h>
-+#include <linux/backlight.h>
-+#include <linux/gpio/consumer.h>
-+#include <linux/regulator/consumer.h>
-+#include <linux/delay.h>
-+#include <linux/of_device.h>
-+#include <linux/module.h>
-+#include <video/mipi_display.h>
-+
-+struct cwd686 {
-+ struct device *dev;
-+ struct drm_panel panel;
-+ struct regulator *supply;
-+ struct gpio_desc *enable_gpio;
-+ struct gpio_desc *reset_gpio;
-+ struct backlight_device *backlight;
-+ enum drm_panel_orientation orientation;
-+ bool prepared;
-+ bool enabled;
-+};
-+
-+static const struct drm_display_mode default_mode = {
-+ .clock = 54465,
-+ .hdisplay = 480,
-+ .hsync_start = 480 + 150,
-+ .hsync_end = 480 + 150 + 24,
-+ .htotal = 480 + 150 + 24 + 40,
-+ .vdisplay = 1280,
-+ .vsync_start = 1280 + 12,
-+ .vsync_end = 1280 + 12 + 6,
-+ .vtotal = 1280 + 12 + 6 + 10,
-+};
-+
-+static inline struct cwd686 *panel_to_cwd686(struct drm_panel *panel)
-+{
-+ return container_of(panel, struct cwd686, panel);
-+}
-+
-+#define ICNL9707_DCS(seq...) \
-+({ \
-+ static const u8 d[] = { seq }; \
-+ mipi_dsi_dcs_write_buffer(dsi, d, ARRAY_SIZE(d)); \
-+})
-+
-+#define ICNL9707_CMD_CGOUTL 0xB3
-+#define ICNL9707_CMD_CGOUTR 0xB4
-+#define ICNL9707_P_CGOUT_VGL 0x00
-+#define ICNL9707_P_CGOUT_VGH 0x01
-+#define ICNL9707_P_CGOUT_HZ 0x02
-+#define ICNL9707_P_CGOUT_GND 0x03
-+#define ICNL9707_P_CGOUT_GSP1 0x04
-+#define ICNL9707_P_CGOUT_GSP2 0x05
-+#define ICNL9707_P_CGOUT_GSP3 0x06
-+#define ICNL9707_P_CGOUT_GSP4 0x07
-+#define ICNL9707_P_CGOUT_GSP5 0x08
-+#define ICNL9707_P_CGOUT_GSP6 0x09
-+#define ICNL9707_P_CGOUT_GSP7 0x0A
-+#define ICNL9707_P_CGOUT_GSP8 0x0B
-+#define ICNL9707_P_CGOUT_GCK1 0x0C
-+#define ICNL9707_P_CGOUT_GCK2 0x0D
-+#define ICNL9707_P_CGOUT_GCK3 0x0E
-+#define ICNL9707_P_CGOUT_GCK4 0x0F
-+#define ICNL9707_P_CGOUT_GCK5 0x10
-+#define ICNL9707_P_CGOUT_GCK6 0x11
-+#define ICNL9707_P_CGOUT_GCK7 0x12
-+#define ICNL9707_P_CGOUT_GCK8 0x13
-+#define ICNL9707_P_CGOUT_GCK9 0x14
-+#define ICNL9707_P_CGOUT_GCK10 0x15
-+#define ICNL9707_P_CGOUT_GCK11 0x16
-+#define ICNL9707_P_CGOUT_GCK12 0x17
-+#define ICNL9707_P_CGOUT_GCK13 0x18
-+#define ICNL9707_P_CGOUT_GCK14 0x19
-+#define ICNL9707_P_CGOUT_GCK15 0x1A
-+#define ICNL9707_P_CGOUT_GCK16 0x1B
-+#define ICNL9707_P_CGOUT_DIR 0x1C
-+#define ICNL9707_P_CGOUT_DIRB 0x1D
-+#define ICNL9707_P_CGOUT_ECLK_AC 0x1E
-+#define ICNL9707_P_CGOUT_ECLK_ACB 0x1F
-+#define ICNL9707_P_CGOUT_ECLK_AC2 0x20
-+#define ICNL9707_P_CGOUT_ECLK_AC2B 0x21
-+#define ICNL9707_P_CGOUT_GCH 0x22
-+#define ICNL9707_P_CGOUT_GCL 0x23
-+#define ICNL9707_P_CGOUT_XDON 0x24
-+#define ICNL9707_P_CGOUT_XDONB 0x25
-+
-+#define ICNL9707_MADCTL_ML 0x10
-+#define ICNL9707_MADCTL_RGB 0x00
-+#define ICNL9707_MADCTL_BGR 0x08
-+#define ICNL9707_MADCTL_MH 0x04
-+
-+#define ICNL9707_CMD_PWRCON_VCOM 0xB6
-+#define ICNL9707_P_PWRCON_VCOM_0495V 0x0D
-+
-+#define ICNL9707_CMD_PWRCON_SEQ 0xB7
-+#define ICNL9707_CMD_PWRCON_CLK 0xB8
-+#define ICNL9707_CMD_PWRCON_BTA 0xB9
-+#define ICNL9707_CMD_PWRCON_MODE 0xBA
-+#define ICNL9707_CMD_PWRCON_REG 0xBD
-+
-+#define ICNL9707_CMD_TCON 0xC1
-+#define ICNL9707_CMD_TCON2 0xC2
-+#define ICNL9707_CMD_TCON3 0xC3
-+#define ICNL9707_CMD_SRC_TIM 0xC6
-+#define ICNL9707_CMD_SRCCON 0xC7
-+#define ICNL9707_CMD_SET_GAMMA 0xC8
-+
-+#define ICNL9707_CMD_ETC 0xD0
-+
-+#define ICNL9707_CMD_PASSWORD1 0xF0
-+#define ICNL9707_P_PASSWORD1_DEFAULT 0xA5
-+#define ICNL9707_P_PASSWORD1_ENABLE_LVL2 0x5A
-+
-+#define ICNL9707_CMD_PASSWORD2 0xF1
-+#define ICNL9707_P_PASSWORD2_DEFAULT 0x5A
-+#define ICNL9707_P_PASSWORD2_ENABLE_LVL2 0xA5
-+
-+static int cwd686_init_sequence(struct cwd686 *ctx)
-+{
-+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
-+ int err;
-+
-+ /* Enable access to Level 2 registers */
-+ ICNL9707_DCS(ICNL9707_CMD_PASSWORD1,
-+ ICNL9707_P_PASSWORD1_ENABLE_LVL2,
-+ ICNL9707_P_PASSWORD1_ENABLE_LVL2);
-+ ICNL9707_DCS(ICNL9707_CMD_PASSWORD2,
-+ ICNL9707_P_PASSWORD2_ENABLE_LVL2,
-+ ICNL9707_P_PASSWORD2_ENABLE_LVL2);
-+
-+ /* Set PWRCON_VCOM (-0.495V, -0.495V) */
-+ ICNL9707_DCS(ICNL9707_CMD_PWRCON_VCOM,
-+ ICNL9707_P_PWRCON_VCOM_0495V,
-+ ICNL9707_P_PWRCON_VCOM_0495V);
-+
-+ /* Map ASG output signals */
-+ ICNL9707_DCS(ICNL9707_CMD_CGOUTR,
-+ ICNL9707_P_CGOUT_GSP7, ICNL9707_P_CGOUT_GSP5,
-+ ICNL9707_P_CGOUT_GCK7, ICNL9707_P_CGOUT_GCK5,
-+ ICNL9707_P_CGOUT_GCK3, ICNL9707_P_CGOUT_GCK1,
-+ ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_VGL,
-+ ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_GND,
-+ ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_GND,
-+ ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND,
-+ ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND,
-+ ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND,
-+ ICNL9707_P_CGOUT_GSP1, ICNL9707_P_CGOUT_GSP3);
-+ ICNL9707_DCS(ICNL9707_CMD_CGOUTL,
-+ ICNL9707_P_CGOUT_GSP8, ICNL9707_P_CGOUT_GSP6,
-+ ICNL9707_P_CGOUT_GCK8, ICNL9707_P_CGOUT_GCK6,
-+ ICNL9707_P_CGOUT_GCK4, ICNL9707_P_CGOUT_GCK2,
-+ ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_VGL,
-+ ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_GND,
-+ ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_GND,
-+ ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND,
-+ ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND,
-+ ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND,
-+ ICNL9707_P_CGOUT_GSP2, ICNL9707_P_CGOUT_GSP4);
-+
-+ /* Undocumented commands provided by the vendor */
-+ ICNL9707_DCS(0xB0, 0x54, 0x32, 0x23, 0x45, 0x44, 0x44, 0x44, 0x44, 0x90, 0x01, 0x90, 0x01);
-+ ICNL9707_DCS(0xB1, 0x32, 0x84, 0x02, 0x83, 0x30, 0x01, 0x6B, 0x01);
-+ ICNL9707_DCS(0xB2, 0x73);
-+
-+ ICNL9707_DCS(ICNL9707_CMD_PWRCON_REG,
-+ 0x4E, 0x0E, 0x50, 0x50, 0x26,
-+ 0x1D, 0x00, 0x14, 0x42, 0x03);
-+ ICNL9707_DCS(ICNL9707_CMD_PWRCON_SEQ,
-+ 0x01, 0x01, 0x09, 0x11, 0x0D, 0x55,
-+ 0x19, 0x19, 0x21, 0x1D, 0x00, 0x00,
-+ 0x00, 0x00, 0x02, 0xFF, 0x3C);
-+ ICNL9707_DCS(ICNL9707_CMD_PWRCON_CLK, 0x23, 0x01, 0x30, 0x34, 0x63);
-+
-+ /* Disable abnormal power-off flag */
-+ ICNL9707_DCS(ICNL9707_CMD_PWRCON_BTA, 0xA0, 0x22, 0x00, 0x44);
-+
-+ ICNL9707_DCS(ICNL9707_CMD_PWRCON_MODE, 0x12, 0x63);
-+
-+ /* Set VBP, VFP, VSW, HBP, HFP, HSW */
-+ ICNL9707_DCS(ICNL9707_CMD_TCON, 0x0C, 0x16, 0x04, 0x0C, 0x10, 0x04);
-+
-+ /* Set resolution */
-+ ICNL9707_DCS(ICNL9707_CMD_TCON2, 0x11, 0x41);
-+
-+ /* Set frame blanking */
-+ ICNL9707_DCS(ICNL9707_CMD_TCON3, 0x22, 0x31, 0x04);
-+
-+ ICNL9707_DCS(ICNL9707_CMD_SRCCON, 0x05, 0x23, 0x6B, 0x49, 0x00);
-+
-+ /* Another undocumented command */
-+ ICNL9707_DCS(0xC5, 0x00);
-+
-+ ICNL9707_DCS(ICNL9707_CMD_ETC, 0x37, 0xFF, 0xFF);
-+
-+ /* Another set of undocumented commands */
-+ ICNL9707_DCS(0xD2, 0x63, 0x0B, 0x08, 0x88);
-+ ICNL9707_DCS(0xD3, 0x01, 0x00, 0x00, 0x01, 0x01, 0x37, 0x25, 0x38, 0x31, 0x06, 0x07);
-+
-+ /* Set Gamma to 2.2 */
-+ ICNL9707_DCS(ICNL9707_CMD_SET_GAMMA,
-+ 0x7C, 0x6A, 0x5D, 0x53, 0x53, 0x45, 0x4B,
-+ 0x35, 0x4D, 0x4A, 0x49, 0x66, 0x53, 0x57,
-+ 0x4A, 0x48, 0x3B, 0x2A, 0x06, 0x7C, 0x6A,
-+ 0x5D, 0x53, 0x53, 0x45, 0x4B, 0x35, 0x4D,
-+ 0x4A, 0x49, 0x66, 0x53, 0x57, 0x4A, 0x48,
-+ 0x3B, 0x2A, 0x06);
-+
-+ ICNL9707_DCS(ICNL9707_CMD_SRC_TIM, 0x00, 0x00, 0xFF, 0x00, 0x00, 0xFF, 0x00, 0x00);
-+
-+ /* Another undocumented command */
-+ ICNL9707_DCS(0xF4, 0x08, 0x77);
-+
-+ ICNL9707_DCS(MIPI_DCS_SET_ADDRESS_MODE,
-+ ICNL9707_MADCTL_RGB | ICNL9707_MADCTL_ML | ICNL9707_MADCTL_MH);
-+
-+ /* Enable tearing mode at VBLANK */
-+ err = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
-+ if (err) {
-+ dev_err(ctx->dev, "failed to enable vblank TE (%d)\n", err);
-+ return err;
-+ }
-+
-+ /* Disable access to Level 2 registers */
-+ ICNL9707_DCS(ICNL9707_CMD_PASSWORD2,
-+ ICNL9707_P_PASSWORD2_DEFAULT,
-+ ICNL9707_P_PASSWORD2_DEFAULT);
-+ ICNL9707_DCS(ICNL9707_CMD_PASSWORD1,
-+ ICNL9707_P_PASSWORD1_DEFAULT,
-+ ICNL9707_P_PASSWORD1_DEFAULT);
-+
-+ return 0;
-+}
-+
-+static int cwd686_disable(struct drm_panel *panel)
-+{
-+ struct cwd686 *ctx = panel_to_cwd686(panel);
-+
-+ if (!ctx->enabled)
-+ return 0;
-+
-+ backlight_disable(ctx->backlight);
-+
-+ ctx->enabled = false;
-+
-+ return 0;
-+}
-+
-+static int cwd686_unprepare(struct drm_panel *panel)
-+{
-+ struct cwd686 *ctx = panel_to_cwd686(panel);
-+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
-+ int err;
-+
-+ if (!ctx->prepared)
-+ return 0;
-+
-+ err = mipi_dsi_dcs_set_display_off(dsi);
-+ if (err) {
-+ dev_err(ctx->dev, "failed to turn display off (%d)\n", err);
-+ return err;
-+ }
-+
-+ err = mipi_dsi_dcs_enter_sleep_mode(dsi);
-+ if (err) {
-+ dev_err(ctx->dev, "failed to enter sleep mode (%d)\n", err);
-+ return err;
-+ }
-+
-+ msleep(120);
-+
-+ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
-+
-+ ctx->prepared = false;
-+
-+ return 0;
-+}
-+
-+static int cwd686_prepare(struct drm_panel *panel)
-+{
-+ struct cwd686 *ctx = panel_to_cwd686(panel);
-+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
-+ int err;
-+
-+ if (ctx->prepared)
-+ return 0;
-+
-+ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
-+ /* T2 */
-+ msleep(10);
-+
-+ gpiod_set_value_cansleep(ctx->reset_gpio, 0);
-+ /* T3 */
-+ msleep(20);
-+
-+ /* Exit sleep mode and power on */
-+
-+ err = cwd686_init_sequence(ctx);
-+ if (err) {
-+ dev_err(ctx->dev, "failed to initialize display (%d)\n", err);
-+ return err;
-+ }
-+
-+ err = mipi_dsi_dcs_exit_sleep_mode(dsi);
-+ if (err) {
-+ dev_err(ctx->dev, "failed to exit sleep mode (%d)\n", err);
-+ return err;
-+ }
-+ /* T6 */
-+ msleep(120);
-+
-+ err = mipi_dsi_dcs_set_display_on(dsi);
-+ if (err) {
-+ dev_err(ctx->dev, "failed to turn display on (%d)\n", err);
-+ return err;
-+ }
-+ msleep(20);
-+
-+ ctx->prepared = true;
-+
-+ return 0;
-+}
-+
-+static int cwd686_enable(struct drm_panel *panel)
-+{
-+ struct cwd686 *ctx = panel_to_cwd686(panel);
-+
-+ if (ctx->enabled)
-+ return 0;
-+
-+ backlight_enable(ctx->backlight);
-+
-+ ctx->enabled = true;
-+
-+ return 0;
-+}
-+
-+static int cwd686_get_modes(struct drm_panel *panel, struct drm_connector *connector)
-+{
-+ struct cwd686 *ctx = panel_to_cwd686(panel);
-+ struct drm_display_mode *mode;
-+
-+ mode = drm_mode_duplicate(connector->dev, &default_mode);
-+ if (!mode) {
-+ dev_err(panel->dev, "bad mode or failed to add mode\n");
-+ return -EINVAL;
-+ }
-+ drm_mode_set_name(mode);
-+ mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
-+
-+ connector->display_info.width_mm = mode->width_mm;
-+ connector->display_info.height_mm = mode->height_mm;
-+
-+ /* set up connector's "panel orientation" property */
-+ drm_connector_set_panel_orientation(connector, ctx->orientation);
-+
-+ drm_mode_probed_add(connector, mode);
-+
-+ return 1; /* Number of modes */
-+}
-+
-+static const struct drm_panel_funcs cwd686_drm_funcs = {
-+ .disable = cwd686_disable,
-+ .unprepare = cwd686_unprepare,
-+ .prepare = cwd686_prepare,
-+ .enable = cwd686_enable,
-+ .get_modes = cwd686_get_modes,
-+};
-+
-+static int cwd686_probe(struct mipi_dsi_device *dsi)
-+{
-+ struct device *dev = &dsi->dev;
-+ struct cwd686 *ctx;
-+ int err;
-+
-+ ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
-+ if (!ctx)
-+ return -ENOMEM;
-+
-+ mipi_dsi_set_drvdata(dsi, ctx);
-+ ctx->dev = dev;
-+
-+ dsi->lanes = 4;
-+ dsi->format = MIPI_DSI_FMT_RGB888;
-+ dsi->mode_flags = MIPI_DSI_MODE_VIDEO |
-+ MIPI_DSI_MODE_VIDEO_BURST |
-+ MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
-+
-+ ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
-+ if (IS_ERR(ctx->reset_gpio)) {
-+ err = PTR_ERR(ctx->reset_gpio);
-+ if (err != -EPROBE_DEFER)
-+ dev_err(dev, "failed to request GPIO (%d)\n", err);
-+ return err;
-+ }
-+
-+ ctx->backlight = devm_of_find_backlight(dev);
-+ if (IS_ERR(ctx->backlight))
-+ return PTR_ERR(ctx->backlight);
-+
-+ err = of_drm_get_panel_orientation(dev->of_node, &ctx->orientation);
-+ if (err) {
-+ dev_err(dev, "%pOF: failed to get orientation %d\n", dev->of_node, err);
-+ return err;
-+ }
-+
-+ drm_panel_init(&ctx->panel, dev, &cwd686_drm_funcs, DRM_MODE_CONNECTOR_DSI);
-+
-+ drm_panel_add(&ctx->panel);
-+
-+ err = mipi_dsi_attach(dsi);
-+ if (err < 0) {
-+ dev_err(dev, "mipi_dsi_attach() failed: %d\n", err);
-+ drm_panel_remove(&ctx->panel);
-+ return err;
-+ }
-+
-+ return 0;
-+}
-+
-+static void cwd686_remove(struct mipi_dsi_device *dsi)
-+{
-+ struct cwd686 *ctx = mipi_dsi_get_drvdata(dsi);
-+
-+ mipi_dsi_detach(dsi);
-+ drm_panel_remove(&ctx->panel);
-+}
-+
-+static const struct of_device_id cwd686_of_match[] = {
-+ { .compatible = "clockwork,cwd686" },
-+ { /* sentinel */ }
-+};
-+MODULE_DEVICE_TABLE(of, cwd686_of_match);
-+
-+static struct mipi_dsi_driver cwd686_driver = {
-+ .probe = cwd686_probe,
-+ .remove = cwd686_remove,
-+ .driver = {
-+ .name = "panel-clockwork-cwd686",
-+ .of_match_table = cwd686_of_match,
-+ },
-+};
-+module_mipi_dsi_driver(cwd686_driver);
-+
-+MODULE_AUTHOR("Pinfan Zhu <zhu@clockworkpi.com>");
-+MODULE_AUTHOR("Max Fierke <max@maxfierke.com>");
-+MODULE_DESCRIPTION("ClockworkPi CWD686 panel driver");
-+MODULE_LICENSE("GPL");
+++ /dev/null
-From 979271f803c1578087a965a2a4b845c87e7d922f Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 7 Aug 2022 19:14:21 -0500
-Subject: [PATCH 108/117] drm: panel: cwd686: Add regulators
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- .../gpu/drm/panel/panel-clockwork-cwd686.c | 26 ++++++++++++++++++-
- 1 file changed, 25 insertions(+), 1 deletion(-)
-
---- a/drivers/gpu/drm/panel/panel-clockwork-cwd686.c
-+++ b/drivers/gpu/drm/panel/panel-clockwork-cwd686.c
-@@ -20,7 +20,8 @@
- struct cwd686 {
- struct device *dev;
- struct drm_panel panel;
-- struct regulator *supply;
-+ struct regulator *iovcc;
-+ struct regulator *vci;
- struct gpio_desc *enable_gpio;
- struct gpio_desc *reset_gpio;
- struct backlight_device *backlight;
-@@ -279,6 +280,9 @@ static int cwd686_unprepare(struct drm_p
-
- gpiod_set_value_cansleep(ctx->reset_gpio, 1);
-
-+ regulator_disable(ctx->vci);
-+ regulator_disable(ctx->iovcc);
-+
- ctx->prepared = false;
-
- return 0;
-@@ -293,6 +297,18 @@ static int cwd686_prepare(struct drm_pan
- if (ctx->prepared)
- return 0;
-
-+ err = regulator_enable(ctx->iovcc);
-+ if (err) {
-+ dev_err(ctx->dev, "failed to enable iovcc (%d)\n", err);
-+ return err;
-+ }
-+
-+ err = regulator_enable(ctx->vci);
-+ if (err) {
-+ dev_err(ctx->dev, "failed to enable vci (%d)\n", err);
-+ return err;
-+ }
-+
- gpiod_set_value_cansleep(ctx->reset_gpio, 1);
- /* T2 */
- msleep(10);
-@@ -402,6 +418,14 @@ static int cwd686_probe(struct mipi_dsi_
- return err;
- }
-
-+ ctx->iovcc = devm_regulator_get(dev, "iovcc");
-+ if (IS_ERR(ctx->iovcc))
-+ return PTR_ERR(ctx->iovcc);
-+
-+ ctx->vci = devm_regulator_get(dev, "vci");
-+ if (IS_ERR(ctx->vci))
-+ return PTR_ERR(ctx->vci);
-+
- ctx->backlight = devm_of_find_backlight(dev);
- if (IS_ERR(ctx->backlight))
- return PTR_ERR(ctx->backlight);
+++ /dev/null
-From 6112585994a6bdbd882709e7187c8c9289211b3b Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 7 Aug 2022 19:16:03 -0500
-Subject: [PATCH 109/117] drm: panel: cwd686: Make reset gpio mandatory
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- drivers/gpu/drm/panel/panel-clockwork-cwd686.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/gpu/drm/panel/panel-clockwork-cwd686.c
-+++ b/drivers/gpu/drm/panel/panel-clockwork-cwd686.c
-@@ -410,7 +410,7 @@ static int cwd686_probe(struct mipi_dsi_
- MIPI_DSI_MODE_VIDEO_BURST |
- MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
-
-- ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
-+ ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
- if (IS_ERR(ctx->reset_gpio)) {
- err = PTR_ERR(ctx->reset_gpio);
- if (err != -EPROBE_DEFER)
+++ /dev/null
-From 8d70f9f4a66522c2720de986623d1130337ff670 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 7 Aug 2022 19:16:18 -0500
-Subject: [PATCH 110/117] drm: panel: cwd686: Increase post-reset delay
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- drivers/gpu/drm/panel/panel-clockwork-cwd686.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/gpu/drm/panel/panel-clockwork-cwd686.c
-+++ b/drivers/gpu/drm/panel/panel-clockwork-cwd686.c
-@@ -315,7 +315,7 @@ static int cwd686_prepare(struct drm_pan
-
- gpiod_set_value_cansleep(ctx->reset_gpio, 0);
- /* T3 */
-- msleep(20);
-+ msleep(120);
-
- /* Exit sleep mode and power on */
-
+++ /dev/null
-From 8fc2a02d1d2e98a01a2dad3bf3da8e33366725eb Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 7 Aug 2022 19:17:35 -0500
-Subject: [PATCH 111/117] drm: panel: cwd686: Use vendor panel init sequence
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- .../gpu/drm/panel/panel-clockwork-cwd686.c | 142 ++++--------------
- 1 file changed, 32 insertions(+), 110 deletions(-)
-
---- a/drivers/gpu/drm/panel/panel-clockwork-cwd686.c
-+++ b/drivers/gpu/drm/panel/panel-clockwork-cwd686.c
-@@ -47,10 +47,12 @@ static inline struct cwd686 *panel_to_cw
- return container_of(panel, struct cwd686, panel);
- }
-
--#define ICNL9707_DCS(seq...) \
-+#define dcs_write_seq(seq...) \
- ({ \
- static const u8 d[] = { seq }; \
-- mipi_dsi_dcs_write_buffer(dsi, d, ARRAY_SIZE(d)); \
-+ ssize_t r = mipi_dsi_dcs_write_buffer(dsi, d, ARRAY_SIZE(d)); \
-+ if (r < 0) \
-+ return r; \
- })
-
- #define ICNL9707_CMD_CGOUTL 0xB3
-@@ -128,115 +130,35 @@ static inline struct cwd686 *panel_to_cw
- static int cwd686_init_sequence(struct cwd686 *ctx)
- {
- struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
-- int err;
-
-- /* Enable access to Level 2 registers */
-- ICNL9707_DCS(ICNL9707_CMD_PASSWORD1,
-- ICNL9707_P_PASSWORD1_ENABLE_LVL2,
-- ICNL9707_P_PASSWORD1_ENABLE_LVL2);
-- ICNL9707_DCS(ICNL9707_CMD_PASSWORD2,
-- ICNL9707_P_PASSWORD2_ENABLE_LVL2,
-- ICNL9707_P_PASSWORD2_ENABLE_LVL2);
--
-- /* Set PWRCON_VCOM (-0.495V, -0.495V) */
-- ICNL9707_DCS(ICNL9707_CMD_PWRCON_VCOM,
-- ICNL9707_P_PWRCON_VCOM_0495V,
-- ICNL9707_P_PWRCON_VCOM_0495V);
--
-- /* Map ASG output signals */
-- ICNL9707_DCS(ICNL9707_CMD_CGOUTR,
-- ICNL9707_P_CGOUT_GSP7, ICNL9707_P_CGOUT_GSP5,
-- ICNL9707_P_CGOUT_GCK7, ICNL9707_P_CGOUT_GCK5,
-- ICNL9707_P_CGOUT_GCK3, ICNL9707_P_CGOUT_GCK1,
-- ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_VGL,
-- ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_GND,
-- ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_GND,
-- ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND,
-- ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND,
-- ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND,
-- ICNL9707_P_CGOUT_GSP1, ICNL9707_P_CGOUT_GSP3);
-- ICNL9707_DCS(ICNL9707_CMD_CGOUTL,
-- ICNL9707_P_CGOUT_GSP8, ICNL9707_P_CGOUT_GSP6,
-- ICNL9707_P_CGOUT_GCK8, ICNL9707_P_CGOUT_GCK6,
-- ICNL9707_P_CGOUT_GCK4, ICNL9707_P_CGOUT_GCK2,
-- ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_VGL,
-- ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_GND,
-- ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_GND,
-- ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND,
-- ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND,
-- ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND,
-- ICNL9707_P_CGOUT_GSP2, ICNL9707_P_CGOUT_GSP4);
--
-- /* Undocumented commands provided by the vendor */
-- ICNL9707_DCS(0xB0, 0x54, 0x32, 0x23, 0x45, 0x44, 0x44, 0x44, 0x44, 0x90, 0x01, 0x90, 0x01);
-- ICNL9707_DCS(0xB1, 0x32, 0x84, 0x02, 0x83, 0x30, 0x01, 0x6B, 0x01);
-- ICNL9707_DCS(0xB2, 0x73);
--
-- ICNL9707_DCS(ICNL9707_CMD_PWRCON_REG,
-- 0x4E, 0x0E, 0x50, 0x50, 0x26,
-- 0x1D, 0x00, 0x14, 0x42, 0x03);
-- ICNL9707_DCS(ICNL9707_CMD_PWRCON_SEQ,
-- 0x01, 0x01, 0x09, 0x11, 0x0D, 0x55,
-- 0x19, 0x19, 0x21, 0x1D, 0x00, 0x00,
-- 0x00, 0x00, 0x02, 0xFF, 0x3C);
-- ICNL9707_DCS(ICNL9707_CMD_PWRCON_CLK, 0x23, 0x01, 0x30, 0x34, 0x63);
--
-- /* Disable abnormal power-off flag */
-- ICNL9707_DCS(ICNL9707_CMD_PWRCON_BTA, 0xA0, 0x22, 0x00, 0x44);
--
-- ICNL9707_DCS(ICNL9707_CMD_PWRCON_MODE, 0x12, 0x63);
--
-- /* Set VBP, VFP, VSW, HBP, HFP, HSW */
-- ICNL9707_DCS(ICNL9707_CMD_TCON, 0x0C, 0x16, 0x04, 0x0C, 0x10, 0x04);
--
-- /* Set resolution */
-- ICNL9707_DCS(ICNL9707_CMD_TCON2, 0x11, 0x41);
--
-- /* Set frame blanking */
-- ICNL9707_DCS(ICNL9707_CMD_TCON3, 0x22, 0x31, 0x04);
--
-- ICNL9707_DCS(ICNL9707_CMD_SRCCON, 0x05, 0x23, 0x6B, 0x49, 0x00);
--
-- /* Another undocumented command */
-- ICNL9707_DCS(0xC5, 0x00);
--
-- ICNL9707_DCS(ICNL9707_CMD_ETC, 0x37, 0xFF, 0xFF);
--
-- /* Another set of undocumented commands */
-- ICNL9707_DCS(0xD2, 0x63, 0x0B, 0x08, 0x88);
-- ICNL9707_DCS(0xD3, 0x01, 0x00, 0x00, 0x01, 0x01, 0x37, 0x25, 0x38, 0x31, 0x06, 0x07);
--
-- /* Set Gamma to 2.2 */
-- ICNL9707_DCS(ICNL9707_CMD_SET_GAMMA,
-- 0x7C, 0x6A, 0x5D, 0x53, 0x53, 0x45, 0x4B,
-- 0x35, 0x4D, 0x4A, 0x49, 0x66, 0x53, 0x57,
-- 0x4A, 0x48, 0x3B, 0x2A, 0x06, 0x7C, 0x6A,
-- 0x5D, 0x53, 0x53, 0x45, 0x4B, 0x35, 0x4D,
-- 0x4A, 0x49, 0x66, 0x53, 0x57, 0x4A, 0x48,
-- 0x3B, 0x2A, 0x06);
--
-- ICNL9707_DCS(ICNL9707_CMD_SRC_TIM, 0x00, 0x00, 0xFF, 0x00, 0x00, 0xFF, 0x00, 0x00);
--
-- /* Another undocumented command */
-- ICNL9707_DCS(0xF4, 0x08, 0x77);
--
-- ICNL9707_DCS(MIPI_DCS_SET_ADDRESS_MODE,
-- ICNL9707_MADCTL_RGB | ICNL9707_MADCTL_ML | ICNL9707_MADCTL_MH);
--
-- /* Enable tearing mode at VBLANK */
-- err = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
-- if (err) {
-- dev_err(ctx->dev, "failed to enable vblank TE (%d)\n", err);
-- return err;
-- }
--
-- /* Disable access to Level 2 registers */
-- ICNL9707_DCS(ICNL9707_CMD_PASSWORD2,
-- ICNL9707_P_PASSWORD2_DEFAULT,
-- ICNL9707_P_PASSWORD2_DEFAULT);
-- ICNL9707_DCS(ICNL9707_CMD_PASSWORD1,
-- ICNL9707_P_PASSWORD1_DEFAULT,
-- ICNL9707_P_PASSWORD1_DEFAULT);
-+ dcs_write_seq(0xF0,0x5A,0x5A);
-+ dcs_write_seq(0xF1,0xA5,0xA5);
-+ dcs_write_seq(0xB6,0x0D,0x0D);
-+ dcs_write_seq(0xB4,0x0A,0x08,0x12,0x10,0x0E,0x0C,0x00,0x00,0x00,0x03,0x00,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x04,0x06);
-+ dcs_write_seq(0xB3,0x0B,0x09,0x13,0x11,0x0F,0x0D,0x00,0x00,0x00,0x03,0x00,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x05,0x07);
-+ dcs_write_seq(0xB0,0x54,0x32,0x23,0x45,0x44,0x44,0x44,0x44,0x90,0x01,0x90,0x01);
-+ dcs_write_seq(0xB1,0x32,0x84,0x02,0x83,0x30,0x01,0x6B,0x01);
-+ dcs_write_seq(0xB2,0x73);
-+ dcs_write_seq(0xBD,0x4E,0x0E,0x50,0x50,0x26,0x1D,0x00,0x14,0x42,0x03);
-+ dcs_write_seq(0xB7,0x01,0x01,0x09,0x11,0x0D,0x55,0x19,0x19,0x21,0x1D,0x00,0x00,0x00,0x00,0x02,0xFF,0x3C);
-+ dcs_write_seq(0xB8,0x23,0x01,0x30,0x34,0x63);
-+ dcs_write_seq(0xB9,0xA0,0x22,0x00,0x44);
-+ dcs_write_seq(0xBA,0x12,0x63);
-+ dcs_write_seq(0xC1,0x0C,0x16,0x04,0x0C,0x10,0x04);
-+ dcs_write_seq(0xC2,0x11,0x41);
-+ dcs_write_seq(0xC3,0x22,0x31,0x04);
-+ dcs_write_seq(0xC7,0x05,0x23,0x6B,0x49,0x00);
-+ dcs_write_seq(0xC5,0x00);
-+ dcs_write_seq(0xD0,0x37,0xFF,0xFF);
-+ dcs_write_seq(0xD2,0x63,0x0B,0x08,0x88);
-+ dcs_write_seq(0xD3,0x01,0x00,0x00,0x01,0x01,0x37,0x25,0x38,0x31,0x06,0x07);
-+ dcs_write_seq(0xC8,0x7C,0x6A,0x5D,0x53,0x53,0x45,0x4B,0x35,0x4D,0x4A,0x49,0x66,0x53,0x57,0x4A,0x48,0x3B,0x2A,0x06,0x7C,0x6A,0x5D,0x53,0x53,0x45,0x4B,0x35,0x4D,0x4A,0x49,0x66,0x53,0x57,0x4A,0x48,0x3B,0x2A,0x06);//GAMMA2.2
-+ dcs_write_seq(0xC6,0x00,0x00,0xFF,0x00,0x00,0xFF,0x00,0x00);
-+ dcs_write_seq(0xF4,0x08,0x77);
-+ dcs_write_seq(0x36,0x14);
-+ dcs_write_seq(0x35,0x00);
-+ dcs_write_seq(0xF1,0x5A,0x5A);
-+ dcs_write_seq(0xF0,0xA5,0xA5);
-
- return 0;
- }
+++ /dev/null
-From 6ea428297717faa16056076f7dd5a69e49c58fe6 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 7 Aug 2022 23:34:35 -0500
-Subject: [PATCH 112/117] drm: panel: cwd686: Fix timings
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- drivers/gpu/drm/panel/panel-clockwork-cwd686.c | 18 +++++++++---------
- 1 file changed, 9 insertions(+), 9 deletions(-)
-
---- a/drivers/gpu/drm/panel/panel-clockwork-cwd686.c
-+++ b/drivers/gpu/drm/panel/panel-clockwork-cwd686.c
-@@ -31,15 +31,15 @@ struct cwd686 {
- };
-
- static const struct drm_display_mode default_mode = {
-- .clock = 54465,
-- .hdisplay = 480,
-- .hsync_start = 480 + 150,
-- .hsync_end = 480 + 150 + 24,
-- .htotal = 480 + 150 + 24 + 40,
-- .vdisplay = 1280,
-- .vsync_start = 1280 + 12,
-- .vsync_end = 1280 + 12 + 6,
-- .vtotal = 1280 + 12 + 6 + 10,
-+ .clock = 54465,
-+ .hdisplay = 480,
-+ .hsync_start = 480 + 64,
-+ .hsync_end = 480 + 64 + 40,
-+ .htotal = 480 + 64 + 40 + 110,
-+ .vdisplay = 1280,
-+ .vsync_start = 1280 + 16,
-+ .vsync_end = 1280 + 16 + 10,
-+ .vtotal = 1280 + 16 + 10 + 2,
- };
-
- static inline struct cwd686 *panel_to_cwd686(struct drm_panel *panel)
+++ /dev/null
-From 16359ba0c5f5011e4742672454b35ad91a02fabe Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Mon, 8 Aug 2022 00:30:17 -0500
-Subject: [PATCH 113/117] drm: panel: cwd686: Disable burst
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- drivers/gpu/drm/panel/panel-clockwork-cwd686.c | 1 -
- 1 file changed, 1 deletion(-)
-
---- a/drivers/gpu/drm/panel/panel-clockwork-cwd686.c
-+++ b/drivers/gpu/drm/panel/panel-clockwork-cwd686.c
-@@ -329,7 +329,6 @@ static int cwd686_probe(struct mipi_dsi_
- dsi->lanes = 4;
- dsi->format = MIPI_DSI_FMT_RGB888;
- dsi->mode_flags = MIPI_DSI_MODE_VIDEO |
-- MIPI_DSI_MODE_VIDEO_BURST |
- MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
-
- ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+++ /dev/null
-From 02da00f2215f3d755ec806636fe499331870e8d6 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Tue, 9 Aug 2022 20:14:59 -0500
-Subject: [PATCH 114/117] drm: panel: cwd686: Use the init sequence from the
- R-01 BSP
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- .../gpu/drm/panel/panel-clockwork-cwd686.c | 44 ++++++++-----------
- 1 file changed, 19 insertions(+), 25 deletions(-)
-
---- a/drivers/gpu/drm/panel/panel-clockwork-cwd686.c
-+++ b/drivers/gpu/drm/panel/panel-clockwork-cwd686.c
-@@ -131,34 +131,28 @@ static int cwd686_init_sequence(struct c
- {
- struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
-
-- dcs_write_seq(0xF0,0x5A,0x5A);
-- dcs_write_seq(0xF1,0xA5,0xA5);
-- dcs_write_seq(0xB6,0x0D,0x0D);
-- dcs_write_seq(0xB4,0x0A,0x08,0x12,0x10,0x0E,0x0C,0x00,0x00,0x00,0x03,0x00,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x04,0x06);
-- dcs_write_seq(0xB3,0x0B,0x09,0x13,0x11,0x0F,0x0D,0x00,0x00,0x00,0x03,0x00,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x05,0x07);
-- dcs_write_seq(0xB0,0x54,0x32,0x23,0x45,0x44,0x44,0x44,0x44,0x90,0x01,0x90,0x01);
-- dcs_write_seq(0xB1,0x32,0x84,0x02,0x83,0x30,0x01,0x6B,0x01);
-+ dcs_write_seq(0xF0,0x5A,0x59);
-+ dcs_write_seq(0xF1,0xA5,0xA6);
-+ dcs_write_seq(0xB0,0x54,0x32,0x23,0x45,0x44,0x44,0x44,0x44,0x9F,0x00,0x01,0x9F,0x00,0x01);
-+ dcs_write_seq(0xB1,0x32,0x84,0x02,0x83,0x29,0x06,0x06,0x72,0x06,0x06);
- dcs_write_seq(0xB2,0x73);
-- dcs_write_seq(0xBD,0x4E,0x0E,0x50,0x50,0x26,0x1D,0x00,0x14,0x42,0x03);
-- dcs_write_seq(0xB7,0x01,0x01,0x09,0x11,0x0D,0x55,0x19,0x19,0x21,0x1D,0x00,0x00,0x00,0x00,0x02,0xFF,0x3C);
-- dcs_write_seq(0xB8,0x23,0x01,0x30,0x34,0x63);
-- dcs_write_seq(0xB9,0xA0,0x22,0x00,0x44);
-- dcs_write_seq(0xBA,0x12,0x63);
-- dcs_write_seq(0xC1,0x0C,0x16,0x04,0x0C,0x10,0x04);
-- dcs_write_seq(0xC2,0x11,0x41);
-- dcs_write_seq(0xC3,0x22,0x31,0x04);
-- dcs_write_seq(0xC7,0x05,0x23,0x6B,0x49,0x00);
-- dcs_write_seq(0xC5,0x00);
-- dcs_write_seq(0xD0,0x37,0xFF,0xFF);
-- dcs_write_seq(0xD2,0x63,0x0B,0x08,0x88);
-- dcs_write_seq(0xD3,0x01,0x00,0x00,0x01,0x01,0x37,0x25,0x38,0x31,0x06,0x07);
-- dcs_write_seq(0xC8,0x7C,0x6A,0x5D,0x53,0x53,0x45,0x4B,0x35,0x4D,0x4A,0x49,0x66,0x53,0x57,0x4A,0x48,0x3B,0x2A,0x06,0x7C,0x6A,0x5D,0x53,0x53,0x45,0x4B,0x35,0x4D,0x4A,0x49,0x66,0x53,0x57,0x4A,0x48,0x3B,0x2A,0x06);//GAMMA2.2
-- dcs_write_seq(0xC6,0x00,0x00,0xFF,0x00,0x00,0xFF,0x00,0x00);
-- dcs_write_seq(0xF4,0x08,0x77);
-+ dcs_write_seq(0xB3,0x0B,0x09,0x13,0x11,0x0F,0x0D,0x00,0x00,0x00,0x03,0x00,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x05,0x07);
-+ dcs_write_seq(0xB4,0x0A,0x08,0x12,0x10,0x0E,0x0C,0x00,0x00,0x00,0x03,0x00,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x04,0x06);
-+ dcs_write_seq(0xB6,0x13,0x13);
-+ dcs_write_seq(0xB8,0xB4,0x43,0x02,0xCC);
-+ dcs_write_seq(0xB9,0xA5,0x20,0xFF,0xC8);
-+ dcs_write_seq(0xBA,0x88,0x23);
-+ dcs_write_seq(0xBD,0x43,0x0E,0x0E,0x50,0x50,0x29,0x10,0x03,0x44,0x03);
-+ dcs_write_seq(0xC1,0x00,0x0C,0x16,0x04,0x00,0x30,0x10,0x04);
-+ dcs_write_seq(0xC2,0x21,0x81);
-+ dcs_write_seq(0xC3,0x02,0x30);
-+ dcs_write_seq(0xC7,0x25,0x6A);
-+ dcs_write_seq(0xC8,0x7C,0x68,0x59,0x4E,0x4B,0x3C,0x41,0x2B,0x44,0x43,0x43,0x60,0x4E,0x55,0x47,0x44,0x38,0x27,0x06,0x7C,0x68,0x59,0x4E,0x4B,0x3C,0x41,0x2B,0x44,0x43,0x43,0x60,0x4E,0x55,0x47,0x44,0x38,0x27,0x06);
-+ dcs_write_seq(0xD4,0x00,0x00,0x00,0x32,0x04,0x51);
-+ dcs_write_seq(0xF1,0x5A,0x59);
-+ dcs_write_seq(0xF0,0xA5,0xA6);
- dcs_write_seq(0x36,0x14);
- dcs_write_seq(0x35,0x00);
-- dcs_write_seq(0xF1,0x5A,0x5A);
-- dcs_write_seq(0xF0,0xA5,0xA5);
-
- return 0;
- }
+++ /dev/null
-From 6b438292e6b86a5cb5bffee2e517f1335903e39e Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Tue, 9 Aug 2022 20:15:24 -0500
-Subject: [PATCH 115/117] drm: panel: cwd686: Power up sequence
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- drivers/gpu/drm/panel/panel-clockwork-cwd686.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/gpu/drm/panel/panel-clockwork-cwd686.c
-+++ b/drivers/gpu/drm/panel/panel-clockwork-cwd686.c
-@@ -218,12 +218,14 @@ static int cwd686_prepare(struct drm_pan
- dev_err(ctx->dev, "failed to enable iovcc (%d)\n", err);
- return err;
- }
-+ msleep(20);
-
- err = regulator_enable(ctx->vci);
- if (err) {
- dev_err(ctx->dev, "failed to enable vci (%d)\n", err);
- return err;
- }
-+ msleep(120);
-
- gpiod_set_value_cansleep(ctx->reset_gpio, 1);
- /* T2 */
+++ /dev/null
-From a19565eccfdc0fce7f41cfe70cd67a1a10d2113c Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Tue, 9 Aug 2022 20:15:39 -0500
-Subject: [PATCH 116/117] drm: panel: cwd686: Why is this not getting called?
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- drivers/gpu/drm/panel/panel-clockwork-cwd686.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/gpu/drm/panel/panel-clockwork-cwd686.c
-+++ b/drivers/gpu/drm/panel/panel-clockwork-cwd686.c
-@@ -373,6 +373,8 @@ static void cwd686_remove(struct mipi_ds
-
- mipi_dsi_detach(dsi);
- drm_panel_remove(&ctx->panel);
-+ if (ctx->prepared)
-+ cwd686_unprepare(&ctx->panel);
- }
-
- static const struct of_device_id cwd686_of_match[] = {
+++ /dev/null
-From d6036571b774437bb3bdd378821033e118a01fe8 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Wed, 2 Nov 2022 23:42:52 -0500
-Subject: [PATCH 117/117] riscv: dts: allwinner: d1: Add video engine node
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
----
- arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi | 30 ++++++++++++++++++++
- 1 file changed, 30 insertions(+)
-
---- a/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
-+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
-@@ -105,6 +105,21 @@
- status = "reserved";
- };
-
-+ ve: video-codec@1c0e000 {
-+ compatible = "allwinner,sun20i-d1-video-engine";
-+ reg = <0x1c0e000 0x2000>;
-+ interrupts = <82 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_VE>,
-+ <&ccu CLK_VE>,
-+ <&ccu CLK_MBUS_VE>;
-+ clock-names = "ahb", "mod", "ram";
-+ resets = <&ccu RST_BUS_VE>;
-+ allwinner,sram = <&ve_sram 1>;
-+ interconnects = <&mbus 4>;
-+ interconnect-names = "dma-mem";
-+ iommus = <&iommu 0>;
-+ };
-+
- pio: pinctrl@2000000 {
- compatible = "allwinner,sun20i-d1-pinctrl";
- reg = <0x2000000 0x800>;
-@@ -591,6 +606,21 @@
- #address-cells = <1>;
- #size-cells = <1>;
-
-+ // FIXME: Address is not verified. It is copied from A64/H6.
-+ sram@1d00000 {
-+ compatible = "mmio-sram";
-+ reg = <0x1d00000 0x40000>;
-+ ranges = <0 0x1d00000 0x40000>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ ve_sram: sram-section@0 {
-+ compatible = "allwinner,sun20i-d1-sram-c1",
-+ "allwinner,sun4i-a10-sram-c1";
-+ reg = <0 0x40000>;
-+ };
-+ };
-+
- regulators@3000150 {
- compatible = "allwinner,sun20i-d1-system-ldos";
- reg = <0x3000150 0x4>;
--- /dev/null
+From e663d510ae6a81694a8e9e1ce07bb80dd6b77558 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sun, 24 Jul 2022 17:12:07 -0500
+Subject: [PATCH 001/117] dt-bindings: net: bluetooth: realtek: Add RTL8723DS
+
+RTL8723DS is another version of the RTL8723 WiFi + Bluetooth chip. It is
+already supported by the hci_uart/btrtl driver. Document the compatible.
+
+Series-to: Marcel Holtmann <marcel@holtmann.org>
+Series-to: Johan Hedberg <johan.hedberg@gmail.com>
+Series-to: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
+Series-to: David S. Miller <davem@davemloft.net>
+Series-to: Eric Dumazet <edumazet@google.com>
+Series-to: Jakub Kicinski <kuba@kernel.org>
+Series-to: Paolo Abeni <pabeni@redhat.com>
+Series-cc: linux-bluetooth@vger.kernel.org
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ Documentation/devicetree/bindings/net/realtek-bluetooth.yaml | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml
++++ b/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml
+@@ -20,6 +20,7 @@ properties:
+ enum:
+ - realtek,rtl8723bs-bt
+ - realtek,rtl8723cs-bt
++ - realtek,rtl8723ds-bt
+ - realtek,rtl8822cs-bt
+
+ device-wake-gpios:
--- /dev/null
+From 74492b9ecd874496578693d9985649665b560308 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sun, 7 Aug 2022 20:08:49 -0500
+Subject: [PATCH 002/117] clk: sunxi-ng: mp: Avoid computing the rate twice
+
+ccu_mp_find_best() already computes a best_rate at the same time as the
+best m and p factors. Return it so the caller does not need to duplicate
+the division.
+
+Series-to: Chen-Yu Tsai <wens@csie.org>
+Series-to: Jernej Skrabec <jernej.skrabec@gmail.com>
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ drivers/clk/sunxi-ng/ccu_mp.c | 11 ++++++-----
+ 1 file changed, 6 insertions(+), 5 deletions(-)
+
+--- a/drivers/clk/sunxi-ng/ccu_mp.c
++++ b/drivers/clk/sunxi-ng/ccu_mp.c
+@@ -10,9 +10,9 @@
+ #include "ccu_gate.h"
+ #include "ccu_mp.h"
+
+-static void ccu_mp_find_best(unsigned long parent, unsigned long rate,
+- unsigned int max_m, unsigned int max_p,
+- unsigned int *m, unsigned int *p)
++static unsigned long ccu_mp_find_best(unsigned long parent, unsigned long rate,
++ unsigned int max_m, unsigned int max_p,
++ unsigned int *m, unsigned int *p)
+ {
+ unsigned long best_rate = 0;
+ unsigned int best_m = 0, best_p = 0;
+@@ -35,6 +35,8 @@ static void ccu_mp_find_best(unsigned lo
+
+ *m = best_m;
+ *p = best_p;
++
++ return best_rate;
+ }
+
+ static unsigned long ccu_mp_find_best_with_parent_adj(struct clk_hw *hw,
+@@ -109,8 +111,7 @@ static unsigned long ccu_mp_round_rate(s
+ max_p = cmp->p.max ?: 1 << ((1 << cmp->p.width) - 1);
+
+ if (!clk_hw_can_set_rate_parent(&cmp->common.hw)) {
+- ccu_mp_find_best(*parent_rate, rate, max_m, max_p, &m, &p);
+- rate = *parent_rate / p / m;
++ rate = ccu_mp_find_best(*parent_rate, rate, max_m, max_p, &m, &p);
+ } else {
+ rate = ccu_mp_find_best_with_parent_adj(hw, parent_rate, rate,
+ max_m, max_p);
--- /dev/null
+From 7185f7b424dfd9082bf0859a60b98a2dbd784ed6 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Mon, 5 Sep 2022 16:45:44 -0500
+Subject: [PATCH 003/117] dt-bindings: net: sun8i-emac: Add phy-supply property
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ .../devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
++++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
+@@ -40,6 +40,9 @@ properties:
+ clock-names:
+ const: stmmaceth
+
++ phy-supply:
++ description: PHY regulator
++
+ syscon:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
--- /dev/null
+From d20bb97fac77e4d88424043627c769427fc0d35e Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Mon, 5 Sep 2022 16:46:34 -0500
+Subject: [PATCH 004/117] dt-bindings: net: sun8i-emac: Add properties from
+ dwmac binding
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ .../devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+--- a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
++++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
+@@ -40,6 +40,9 @@ properties:
+ clock-names:
+ const: stmmaceth
+
++ resets: true
++ reset-names: true
++
+ phy-supply:
+ description: PHY regulator
+
+@@ -49,6 +52,8 @@ properties:
+ Phandle to the device containing the EMAC or GMAC clock
+ register
+
++ mdio: true
++
+ required:
+ - compatible
+ - reg
--- /dev/null
+From c99d1e681dc460892004054a314fa7f929f43490 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sat, 13 Aug 2022 10:45:59 -0500
+Subject: [PATCH 005/117] dt-bindings: display: sun8i-a83t-dw-hdmi: Remove
+ #phy-cells
+
+This device is not a PHY, and none of the nodes using this schema
+contain a #phy-cells property. Likely this was a copy/paste error
+introduced during the YAML conversion.
+
+Fixes: f5a98bfe7b37 ("dt-bindings: display: Convert Allwinner display pipeline to schemas")
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ .../bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml | 3 ---
+ 1 file changed, 3 deletions(-)
+
+--- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
++++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
+@@ -20,9 +20,6 @@ maintainers:
+ - Maxime Ripard <mripard@kernel.org>
+
+ properties:
+- "#phy-cells":
+- const: 0
+-
+ compatible:
+ oneOf:
+ - const: allwinner,sun8i-a83t-dw-hdmi
--- /dev/null
+From e214b79d45cccdd0cfe839e54da2b3c82b6c6be4 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Thu, 31 Mar 2022 23:43:15 -0500
+Subject: [PATCH 006/117] dt-bindings: display: Add D1 HDMI compatibles
+
+Allwinner D1 contains a DesignWare HDMI controller with some changes in
+platform integration, and a new HDMI PHY. Add their compatibles.
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ .../bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml | 1 +
+ .../bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml | 1 +
+ 2 files changed, 2 insertions(+)
+
+--- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
++++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
+@@ -29,6 +29,7 @@ properties:
+ - enum:
+ - allwinner,sun8i-h3-dw-hdmi
+ - allwinner,sun8i-r40-dw-hdmi
++ - allwinner,sun20i-d1-dw-hdmi
+ - allwinner,sun50i-a64-dw-hdmi
+ - const: allwinner,sun8i-a83t-dw-hdmi
+
+--- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml
++++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml
+@@ -19,6 +19,7 @@ properties:
+ - allwinner,sun8i-a83t-hdmi-phy
+ - allwinner,sun8i-h3-hdmi-phy
+ - allwinner,sun8i-r40-hdmi-phy
++ - allwinner,sun20i-d1-hdmi-phy
+ - allwinner,sun50i-a64-hdmi-phy
+ - allwinner,sun50i-h6-hdmi-phy
+
--- /dev/null
+From 75dc74ecc1bf5e270659c6c78877053b50e6ae19 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Wed, 30 Mar 2022 21:24:21 -0500
+Subject: [PATCH 007/117] drm/sun4i: Add support for D1 HDMI
+
+D1's HDMI controller contains some platform integration changes.
+It now has no external TMDS clock. The controller also supports HDCP
+without an external clock or reset.
+
+While the maximum HDMI frequency is not explicity stated, the BSP PHY
+driver provides PLL configurations only up to 297 MHz, so use that as
+the max frequency.
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c | 11 ++++++++++-
+ 1 file changed, 10 insertions(+), 1 deletion(-)
+
+--- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c
++++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c
+@@ -133,7 +133,7 @@ static int sun8i_dw_hdmi_bind(struct dev
+ return dev_err_probe(dev, PTR_ERR(hdmi->rst_ctrl),
+ "Could not get ctrl reset control\n");
+
+- hdmi->clk_tmds = devm_clk_get(dev, "tmds");
++ hdmi->clk_tmds = devm_clk_get_optional(dev, "tmds");
+ if (IS_ERR(hdmi->clk_tmds))
+ return dev_err_probe(dev, PTR_ERR(hdmi->clk_tmds),
+ "Couldn't get the tmds clock\n");
+@@ -246,6 +246,11 @@ static const struct sun8i_dw_hdmi_quirks
+ .mode_valid = sun8i_dw_hdmi_mode_valid_a83t,
+ };
+
++static const struct sun8i_dw_hdmi_quirks sun20i_d1_quirks = {
++ .mode_valid = sun8i_dw_hdmi_mode_valid_a83t,
++ .use_drm_infoframe = true,
++};
++
+ static const struct sun8i_dw_hdmi_quirks sun50i_h6_quirks = {
+ .mode_valid = sun8i_dw_hdmi_mode_valid_h6,
+ .use_drm_infoframe = true,
+@@ -257,6 +262,10 @@ static const struct of_device_id sun8i_d
+ .data = &sun8i_a83t_quirks,
+ },
+ {
++ .compatible = "allwinner,sun20i-d1-dw-hdmi",
++ .data = &sun20i_d1_quirks,
++ },
++ {
+ .compatible = "allwinner,sun50i-h6-dw-hdmi",
+ .data = &sun50i_h6_quirks,
+ },
--- /dev/null
+From 11f9765a8e6723bcb7243f6dbc48e6deaf17b097 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sun, 3 Apr 2022 15:15:41 -0500
+Subject: [PATCH 008/117] drm/sun4i: sun8i-hdmi-phy: Add support for D1 PHY
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h | 169 +++++++++++++++++++++++++
+ drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 32 +++++
+ 2 files changed, 201 insertions(+)
+
+--- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
++++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
+@@ -145,6 +145,175 @@
+
+ #define SUN8I_HDMI_PHY_CEC_REG 0x003c
+
++#define SUN20I_HDMI_PHY_CTL0_REG 0x0040
++#define SUN20I_HDMI_PHY_CTL0_PLL_LOCK_MODE_MAN BIT(31)
++#define SUN20I_HDMI_PHY_CTL0_PLL_LOCK_MODE BIT(30)
++#define SUN20I_HDMI_PHY_CTL0_FIFO_WORKC_EN BIT(29)
++#define SUN20I_HDMI_PHY_CTL0_FIFO_AUTOSYNC_DIS BIT(28)
++#define SUN20I_HDMI_PHY_CTL0_ENTX GENMASK(27, 24)
++#define SUN20I_HDMI_PHY_CTL0_ENBI GENMASK(23, 20)
++#define SUN20I_HDMI_PHY_CTL0_ENLDO BIT(18)
++#define SUN20I_HDMI_PHY_CTL0_ENLDO_FS BIT(17)
++#define SUN20I_HDMI_PHY_CTL0_ENCK BIT(16)
++#define SUN20I_HDMI_PHY_CTL0_REG_PLR GENMASK(15, 12)
++#define SUN20I_HDMI_PHY_CTL0_REG_DEN GENMASK(11, 8)
++#define SUN20I_HDMI_PHY_CTL0_REG_CSMPS GENMASK(7, 6)
++#define SUN20I_HDMI_PHY_CTL0_REG_CK_TEST_SEL BIT(5)
++#define SUN20I_HDMI_PHY_CTL0_REG_CK_SEL BIT(4)
++#define SUN20I_HDMI_PHY_CTL0_HPD_EN BIT(2)
++#define SUN20I_HDMI_PHY_CTL0_SCL_EN BIT(1)
++#define SUN20I_HDMI_PHY_CTL0_SDA_EN BIT(0)
++
++#define SUN20I_HDMI_PHY_CTL1_REG 0x0044
++#define SUN20I_HDMI_PHY_CTL1_RXSENSE_MODE_MAN BIT(31)
++#define SUN20I_HDMI_PHY_CTL1_RXSENSE_MODE BIT(30)
++#define SUN20I_HDMI_PHY_CTL1_RES_S GENMASK(29, 28)
++#define SUN20I_HDMI_PHY_CTL1_RES_SCKTMDS BIT(27)
++#define SUN20I_HDMI_PHY_CTL1_REG_SWI BIT(26)
++#define SUN20I_HDMI_PHY_CTL1_REG_SVR GENMASK(25, 24)
++#define SUN20I_HDMI_PHY_CTL1_REG_BST2 GENMASK(21, 20)
++#define SUN20I_HDMI_PHY_CTL1_REG_BST1 GENMASK(19, 18)
++#define SUN20I_HDMI_PHY_CTL1_REG_BST0 GENMASK(17, 16)
++#define SUN20I_HDMI_PHY_CTL1_REG_SP2_3 GENMASK(15, 12)
++#define SUN20I_HDMI_PHY_CTL1_REG_SP2_2 GENMASK(11, 8)
++#define SUN20I_HDMI_PHY_CTL1_REG_SP2_1 GENMASK(7, 4)
++#define SUN20I_HDMI_PHY_CTL1_REG_SP2_0 GENMASK(3, 0)
++
++#define SUN20I_HDMI_PHY_CTL2_REG 0x0048
++#define SUN20I_HDMI_PHY_CTL2_HPDO_MODE_MAN BIT(31)
++#define SUN20I_HDMI_PHY_CTL2_HPDO_MODE BIT(30)
++#define SUN20I_HDMI_PHY_CTL2_REG_RESDI GENMASK(29, 24)
++#define SUN20I_HDMI_PHY_CTL2_REG_SP1_3 GENMASK(23, 19)
++#define SUN20I_HDMI_PHY_CTL2_REG_SP1_2 GENMASK(18, 14)
++#define SUN20I_HDMI_PHY_CTL2_REG_SP1_1 GENMASK(13, 9)
++#define SUN20I_HDMI_PHY_CTL2_REG_SP1_0 GENMASK(8, 4)
++#define SUN20I_HDMI_PHY_CTL2_REG_P2OPT GENMASK(3, 0)
++
++#define SUN20I_HDMI_PHY_CTL3_REG 0x004c
++#define SUN20I_HDMI_PHY_CTL3_REG_P2_3 GENMASK(31, 28)
++#define SUN20I_HDMI_PHY_CTL3_REG_P2_2 GENMASK(27, 24)
++#define SUN20I_HDMI_PHY_CTL3_REG_P2_1 GENMASK(23, 20)
++#define SUN20I_HDMI_PHY_CTL3_REG_P2_0 GENMASK(19, 16)
++#define SUN20I_HDMI_PHY_CTL3_REG_MC3 GENMASK(15, 12)
++#define SUN20I_HDMI_PHY_CTL3_REG_MC2 GENMASK(11, 8)
++#define SUN20I_HDMI_PHY_CTL3_REG_MC1 GENMASK(7, 4)
++#define SUN20I_HDMI_PHY_CTL3_REG_MC0 GENMASK(3, 0)
++
++#define SUN20I_HDMI_PHY_CTL4_REG 0x0050
++#define SUN20I_HDMI_PHY_CTL4_REG_SLV GENMASK(31, 29)
++#define SUN20I_HDMI_PHY_CTL4_REG_P1_3 GENMASK(28, 24)
++#define SUN20I_HDMI_PHY_CTL4_REG_P1_2 GENMASK(20, 16)
++#define SUN20I_HDMI_PHY_CTL4_REG_P1_1 GENMASK(12, 8)
++#define SUN20I_HDMI_PHY_CTL4_REG_P1_0 GENMASK(4, 0)
++
++#define SUN20I_HDMI_PHY_CTL5_REG 0x0054
++#define SUN20I_HDMI_PHY_CTL5_REG_P1OPT GENMASK(19, 16)
++#define SUN20I_HDMI_PHY_CTL5_REG_CKPDLYOPT BIT(12)
++#define SUN20I_HDMI_PHY_CTL5_REG_CALSW BIT(11)
++#define SUN20I_HDMI_PHY_CTL5_ENRESCK BIT(10)
++#define SUN20I_HDMI_PHY_CTL5_ENRES BIT(9)
++#define SUN20I_HDMI_PHY_CTL5_ENRCAL BIT(8)
++#define SUN20I_HDMI_PHY_CTL5_ENP2S GENMASK(7, 4)
++#define SUN20I_HDMI_PHY_CTL5_ENIB BIT(1)
++#define SUN20I_HDMI_PHY_CTL5_ENCALOG BIT(0)
++
++#define SUN20I_HDMI_PLL_CTL0_REG 0x0058
++#define SUN20I_HDMI_PLL_CTL0_CKO_SEL GENMASK(31, 30)
++#define SUN20I_HDMI_PLL_CTL0_BYPASS_PPLL BIT(29)
++#define SUN20I_HDMI_PLL_CTL0_ENVBS BIT(28)
++#define SUN20I_HDMI_PLL_CTL0_SLV GENMASK(26, 24)
++#define SUN20I_HDMI_PLL_CTL0_BCR BIT(23)
++#define SUN20I_HDMI_PLL_CTL0_BYPASS_CLRDPTH BIT(22)
++#define SUN20I_HDMI_PLL_CTL0_CLR_DPTH GENMASK(21, 20)
++#define SUN20I_HDMI_PLL_CTL0_CUTFB BIT(18)
++#define SUN20I_HDMI_PLL_CTL0_DIV2_CKBIT BIT(17)
++#define SUN20I_HDMI_PLL_CTL0_DIV2_CKTMDS BIT(16)
++#define SUN20I_HDMI_PLL_CTL0_DIV_PRE GENMASK(15, 12)
++#define SUN20I_HDMI_PLL_CTL0_DIVX1 BIT(10)
++#define SUN20I_HDMI_PLL_CTL0_SDRVEN BIT(9)
++#define SUN20I_HDMI_PLL_CTL0_VCORANGE BIT(8)
++#define SUN20I_HDMI_PLL_CTL0_N_CNTRL GENMASK(7, 6)
++#define SUN20I_HDMI_PLL_CTL0_GMP_CNTRL GENMASK(5, 4)
++#define SUN20I_HDMI_PLL_CTL0_PROP_CNTRL GENMASK(2, 0)
++
++#define SUN20I_HDMI_PLL_CTL1_REG 0x005c
++#define SUN20I_HDMI_PLL_CTL1_CTRL_MODLE_CLKSRC BIT(31)
++#define SUN20I_HDMI_PLL_CTL1_PCNT_N GENMASK(27, 20)
++#define SUN20I_HDMI_PLL_CTL1_PCNT_EN BIT(19)
++#define SUN20I_HDMI_PLL_CTL1_SDM_EN BIT(18)
++#define SUN20I_HDMI_PLL_CTL1_PIXEL_REP GENMASK(17, 16)
++#define SUN20I_HDMI_PLL_CTL1_PWRON BIT(12)
++#define SUN20I_HDMI_PLL_CTL1_RESET BIT(11)
++#define SUN20I_HDMI_PLL_CTL1_SCKREF BIT(10)
++#define SUN20I_HDMI_PLL_CTL1_SCKFB BIT(9)
++#define SUN20I_HDMI_PLL_CTL1_DRV_ANA BIT(8)
++#define SUN20I_HDMI_PLL_CTL1_FAST_TECH BIT(7)
++#define SUN20I_HDMI_PLL_CTL1_GEAR_SHIFT BIT(6)
++#define SUN20I_HDMI_PLL_CTL1_REF_CNTRL GENMASK(5, 4)
++#define SUN20I_HDMI_PLL_CTL1_INT_CNTRL GENMASK(2, 0)
++
++#define SUN20I_HDMI_AFIFO_CFG_REG 0x0060
++#define SUN20I_HDMI_AFIFO_CFG_AFIFO_ERROR BIT(0)
++#define SUN20I_HDMI_AFIFO_CFG_AFIFO_ERROR_DET BIT(1)
++
++#define SUN20I_HDMI_MODULATOR_CFG0_REG 0x0064
++#define SUN20I_HDMI_MODULATOR_CFG1_REG 0x0068
++
++#define SUN20I_HDMI_INDEB_CTRL_REG 0x006c
++#define SUN20I_HDMI_INDEB_CTRL_HPDI_DEBUGMODE BIT(29)
++#define SUN20I_HDMI_INDEB_CTRL_HPDI_DEBUG BIT(28)
++#define SUN20I_HDMI_INDEB_CTRL_SDAI_DEBUGMODE BIT(25)
++#define SUN20I_HDMI_INDEB_CTRL_SDAI_DEBUG BIT(24)
++#define SUN20I_HDMI_INDEB_CTRL_SCLI_DEBUGMODE BIT(21)
++#define SUN20I_HDMI_INDEB_CTRL_SCLI_DEBUG BIT(20)
++#define SUN20I_HDMI_INDEB_CTRL_CECI_DEBUGMODE BIT(17)
++#define SUN20I_HDMI_INDEB_CTRL_CECI_DEBUG BIT(16)
++#define SUN20I_HDMI_INDEB_CTRL_TXDATA_DEBUGMODE GENMASK(1, 0)
++
++#define SUN20I_HDMI_INDBG_TXD0_REG 0x0070
++#define SUN20I_HDMI_INDBG_TXD1_REG 0x0074
++#define SUN20I_HDMI_INDBG_TXD2_REG 0x0078
++#define SUN20I_HDMI_INDBG_TXD3_REG 0x007c
++
++#define SUN20I_HDMI_PLL_STS_REG 0x0080
++#define SUN20I_HDMI_PLL_STS_PHY_CDETPCK_STATUS BIT(31)
++#define SUN20I_HDMI_PLL_STS_PHY_CDETP_STATUS GENMASK(30, 28)
++#define SUN20I_HDMI_PLL_STS_PHY_CDETNCK_STATUS BIT(27)
++#define SUN20I_HDMI_PLL_STS_PHY_CDETN_STATUS GENMASK(26, 24)
++#define SUN20I_HDMI_PLL_STS_PHY_HPDO_STATUS BIT(23)
++#define SUN20I_HDMI_PLL_STS_PHY_SCLO_STATUS BIT(22)
++#define SUN20I_HDMI_PLL_STS_PHY_SDAO_STATUS BIT(21)
++#define SUN20I_HDMI_PLL_STS_PHY_CECO_STATUS BIT(20)
++#define SUN20I_HDMI_PLL_STS_PHY_COUT2D_STATUS BIT(17)
++#define SUN20I_HDMI_PLL_STS_PHY_RCALEND2D_STS BIT(16)
++#define SUN20I_HDMI_PLL_STS_PHY_RESDO2D_STATUS GENMASK(13, 8)
++#define SUN20I_HDMI_PLL_STS_PLL_LOCK_STATUS BIT(4)
++#define SUN20I_HDMI_PLL_STS_RXSENSE_DLY_STATUS BIT(1)
++#define SUN20I_HDMI_PLL_STS_TX_READY_DLY_STATUS BIT(0)
++
++#define SUN20I_HDMI_PRBS_CTL_REG 0x0084
++#define SUN20I_HDMI_PRBS_SEED_GEN_REG 0x0088
++#define SUN20I_HDMI_PRBS_SEED_CHK_REG 0x008c
++#define SUN20I_HDMI_PRBS_SEED_NUM_REG 0x0090
++#define SUN20I_HDMI_PRBS_CYCLE_NUM_REG 0x0094
++
++#define SUN20I_HDMI_PLL_ODLY_REG 0x0098
++#define SUN20I_HDMI_PLL_ODLY_RXSENSE_DLY_RESET BIT(31)
++#define SUN20I_HDMI_PLL_ODLY_RXSENSE_DLY_COUNT GENMASK(30, 16)
++#define SUN20I_HDMI_PLL_ODLY_TX_READY_DLY_RESET BIT(15)
++#define SUN20I_HDMI_PLL_ODLY_TX_READY_DLY_COUNT GENMASK(14, 0)
++
++#define SUN20I_HDMI_PHY_CTL6_REG 0x009c
++#define SUN20I_HDMI_PHY_CTL6_SWITCH_CLKCH_DATA BIT(31)
++#define SUN20I_HDMI_PHY_CTL6_EN_CKDAT BIT(30)
++#define SUN20I_HDMI_PHY_CTL6_CLK_GREATE2_340M GENMASK(29, 20)
++#define SUN20I_HDMI_PHY_CTL6_CLK_GREATE1_340M GENMASK(19, 10)
++#define SUN20I_HDMI_PHY_CTL6_CLK_GREATE0_340M GENMASK(9, 0)
++
++#define SUN20I_HDMI_PHY_CTL7_REG 0x00a0
++#define SUN20I_HDMI_PHY_CTL7_CLK_LOW_340M GENMASK(21, 12)
++#define SUN20I_HDMI_PHY_CTL7_CLK_GREATE3_340M GENMASK(9, 0)
++
+ struct sun8i_hdmi_phy;
+
+ struct sun8i_hdmi_phy_variant {
+--- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
++++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
+@@ -398,6 +398,28 @@ static const struct dw_hdmi_phy_ops sun8
+ .setup_hpd = dw_hdmi_phy_setup_hpd,
+ };
+
++static int sun20i_d1_hdmi_phy_config(struct dw_hdmi *hdmi, void *data,
++ const struct drm_display_info *display,
++ const struct drm_display_mode *mode)
++{
++ struct sun8i_hdmi_phy *phy = data;
++
++ return 0;
++}
++
++static void sun20i_d1_hdmi_phy_disable(struct dw_hdmi *hdmi, void *data)
++{
++ struct sun8i_hdmi_phy *phy = data;
++}
++
++static const struct dw_hdmi_phy_ops sun20i_d1_hdmi_phy_ops = {
++ .init = sun20i_d1_hdmi_phy_config,
++ .disable = sun20i_d1_hdmi_phy_disable,
++ .read_hpd = dw_hdmi_phy_read_hpd,
++ .update_hpd = dw_hdmi_phy_update_hpd,
++ .setup_hpd = dw_hdmi_phy_setup_hpd,
++};
++
+ static void sun8i_hdmi_phy_unlock(struct sun8i_hdmi_phy *phy)
+ {
+ /* enable read access to HDMI controller */
+@@ -576,6 +598,7 @@ void sun8i_hdmi_phy_set_ops(struct sun8i
+ const struct sun8i_hdmi_phy_variant *variant = phy->variant;
+
+ if (variant->phy_ops) {
++ plat_data->phy_force_vendor = true;
+ plat_data->phy_ops = variant->phy_ops;
+ plat_data->phy_name = "sun8i_dw_hdmi_phy";
+ plat_data->phy_data = phy;
+@@ -612,6 +635,11 @@ static const struct sun8i_hdmi_phy_varia
+ .phy_init = &sun8i_hdmi_phy_init_h3,
+ };
+
++static const struct sun8i_hdmi_phy_variant sun20i_d1_hdmi_phy = {
++ .phy_ops = &sun20i_d1_hdmi_phy_ops,
++ .phy_init = &sun50i_hdmi_phy_init_h6,
++};
++
+ static const struct sun8i_hdmi_phy_variant sun50i_a64_hdmi_phy = {
+ .has_phy_clk = true,
+ .phy_ops = &sun8i_h3_hdmi_phy_ops,
+@@ -639,6 +667,10 @@ static const struct of_device_id sun8i_h
+ .data = &sun8i_r40_hdmi_phy,
+ },
+ {
++ .compatible = "allwinner,sun20i-d1-hdmi-phy",
++ .data = &sun20i_d1_hdmi_phy,
++ },
++ {
+ .compatible = "allwinner,sun50i-a64-hdmi-phy",
+ .data = &sun50i_a64_hdmi_phy,
+ },
--- /dev/null
+From 7ea7d4abfd537230da58533803a2d0257addace8 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Wed, 30 Mar 2022 00:46:07 -0500
+Subject: [PATCH 009/117] drm/sun4i: Copy in BSP code for D1 HDMI PHY
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ drivers/gpu/drm/sun4i/aw_phy.h | 411 +++++++++++++++++++++++++
+ drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h | 1 +
+ drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 156 ++++++++++
+ 3 files changed, 568 insertions(+)
+ create mode 100644 drivers/gpu/drm/sun4i/aw_phy.h
+
+--- /dev/null
++++ b/drivers/gpu/drm/sun4i/aw_phy.h
+@@ -0,0 +1,411 @@
++/*
++ * Allwinner SoCs hdmi2.0 driver.
++ *
++ * Copyright (C) 2016 Allwinner.
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2. This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++#ifndef AW_PHY_H_
++#define AW_PHY_H_
++
++#define AW_PHY_TIMEOUT 1000
++#define LOCK_TIMEOUT 100
++
++/* allwinner phy register offset */
++#define HDMI_PHY_CTL0 0x40
++#define HDMI_PHY_CTL1 0x44
++#define HDMI_PHY_CTL2 0x48
++#define HDMI_PHY_CTL3 0x4C
++#define HDMI_PHY_CTL4 0x50
++#define HDMI_PHY_CTL5 0x54
++#define HDMI_PLL_CTL0 0x58
++#define HDMI_PLL_CTL1 0x5C
++#define HDMI_AFIFO_CFG 0x60
++#define HDMI_MODULATOR_CFG0 0x64
++#define HDMI_MODULATOR_CFG1 0x68
++#define HDMI_PHY_INDEB_CTRL 0x6C
++#define HDMI_PHY_INDBG_TXD0 0x70
++#define HDMI_PHY_INDBG_TXD1 0x74
++#define HDMI_PHY_INDBG_TXD2 0x78
++#define HDMI_PHY_INDBG_TXD3 0x7C
++#define HDMI_PHY_PLL_STS 0x80
++#define HDMI_PRBS_CTL 0x84
++#define HDMI_PRBS_SEED_GEN 0x88
++#define HDMI_PRBS_SEED_CHK 0x8C
++#define HDMI_PRBS_SEED_NUM 0x90
++#define HDMI_PRBS_CYCLE_NUM 0x94
++#define HDMI_PHY_PLL_ODLY_CFG 0x98
++#define HDMI_PHY_CTL6 0x9C
++#define HDMI_PHY_CTL7 0xA0
++
++typedef union {
++ u32 dwval;
++ struct {
++ u32 sda_en :1; // Default: 0;
++ u32 scl_en :1; // Default: 0;
++ u32 hpd_en :1; // Default: 0;
++ u32 res0 :1; // Default: 0;
++ u32 reg_ck_sel :1; // Default: 1;
++ u32 reg_ck_test_sel :1; // Default: 1;
++ u32 reg_csmps :2; // Default: 0;
++ u32 reg_den :4; // Default: F;
++ u32 reg_plr :4; // Default: 0;
++ u32 enck :1; // Default: 1;
++ u32 enldo_fs :1; // Default: 1;
++ u32 enldo :1; // Default: 1;
++ u32 res1 :1; // Default: 1;
++ u32 enbi :4; // Default: F;
++ u32 entx :4; // Default: F;
++ u32 async_fifo_autosync_disable :1; // Default: 0;
++ u32 async_fifo_workc_enable :1; // Default: 1;
++ u32 phy_pll_lock_mode :1; // Default: 1;
++ u32 phy_pll_lock_mode_man :1; // Default: 1;
++ } bits;
++} HDMI_PHY_CTL0_t; //=========================== 0x0040
++
++typedef union {
++ u32 dwval;
++ struct {
++ u32 reg_sp2_0 : 4 ; // Default: 0;
++ u32 reg_sp2_1 : 4 ; // Default: 0;
++ u32 reg_sp2_2 : 4 ; // Default: 0;
++ u32 reg_sp2_3 : 4 ; // Default: 0;
++ u32 reg_bst0 : 2 ; // Default: 3;
++ u32 reg_bst1 : 2 ; // Default: 3;
++ u32 reg_bst2 : 2 ; // Default: 3;
++ u32 res0 : 2 ; // Default: 0;
++ u32 reg_svr : 2 ; // Default: 2;
++ u32 reg_swi : 1 ; // Default: 0;
++ u32 res_scktmds : 1 ; // Default: 0;
++ u32 res_res_s : 2 ; // Default: 3;
++ u32 phy_rxsense_mode : 1 ; // Default: 0;
++ u32 res_rxsense_mode_man : 1 ; // Default: 0;
++ } bits;
++} HDMI_PHY_CTL1_t; //===================================================== 0x0044
++
++typedef union {
++ u32 dwval;
++ struct {
++ u32 reg_p2opt : 4 ; // Default: 0;
++ u32 reg_sp1_0 : 5 ; // Default: 0;
++ u32 reg_sp1_1 : 5 ; // Default: 0;
++ u32 reg_sp1_2 : 5 ; // Default: 0;
++ u32 reg_sp1_3 : 5 ; // Default: 0;
++ u32 reg_resdi : 6 ; // Default: 18;
++ u32 phy_hpdo_mode : 1 ; // Default: 0;
++ u32 phy_hpdo_mode_man : 1 ; // Default: 0;
++ } bits;
++} HDMI_PHY_CTL2_t; //===================================================== 0x0048
++
++
++
++typedef union {
++ u32 dwval;
++ struct {
++ u32 reg_mc0 : 4 ; // Default: F;
++ u32 reg_mc1 : 4 ; // Default: F;
++ u32 reg_mc2 : 4 ; // Default: F;
++ u32 reg_mc3 : 4 ; // Default: F;
++ u32 reg_p2_0 : 4 ; // Default: F;
++ u32 reg_p2_1 : 4 ; // Default: F;
++ u32 reg_p2_2 : 4 ; // Default: F;
++ u32 reg_p2_3 : 4 ; // Default: F;
++ } bits;
++} HDMI_PHY_CTL3_t; //===================================================== 0x004C
++
++
++
++typedef union {
++ u32 dwval;
++ struct {
++ u32 reg_p1_0 : 5 ; // Default: 0x10;
++ u32 res0 : 3 ; // Default: 0;
++ u32 reg_p1_1 : 5 ; // Default: 0x10;
++ u32 res1 : 3 ; // Default: 0;
++ u32 reg_p1_2 : 5 ; // Default: 0x10;
++ u32 res2 : 3 ; // Default: 0;
++ u32 reg_p1_3 : 5 ; // Default: 0x10;
++ u32 reg_slv : 3 ; // Default: 0;
++ } bits;
++} HDMI_PHY_CTL4_t; //===================================================== 0x0050
++
++typedef union {
++ u32 dwval;
++ struct {
++ u32 encalog : 1 ; // Default: 0x1;
++ u32 enib : 1 ; // Default: 0x1;
++ u32 res0 : 2 ; // Default: 0;
++ u32 enp2s : 4 ; // Default: 0xF;
++ u32 enrcal : 1 ; // Default: 0x1;
++ u32 enres : 1 ; // Default: 1;
++ u32 enresck : 1 ; // Default: 1;
++ u32 reg_calsw : 1 ; // Default: 0;
++ u32 reg_ckpdlyopt : 1 ; // Default: 0;
++ u32 res1 : 3 ; // Default: 0;
++ u32 reg_p1opt : 4 ; // Default: 0;
++ u32 res2 : 12 ; // Default: 0;
++ } bits;
++} HDMI_PHY_CTL5_t; //===================================================== 0x0054
++
++typedef union {
++ u32 dwval;
++ struct {
++ u32 prop_cntrl : 3 ; // Default: 0x7;
++ u32 res0 : 1 ; // Default: 0;
++ u32 gmp_cntrl : 2 ; // Default: 1;
++ u32 n_cntrl : 2 ; // Default: 0;
++ u32 vcorange : 1 ; // Default: 0;
++ u32 sdrven : 1 ; // Default: 0;
++ u32 divx1 : 1 ; // Default: 0;
++ u32 res1 : 1 ; // Default: 0;
++ u32 div_pre : 4 ; // Default: 0;
++ u32 div2_cktmds : 1 ; // Default: 1;
++ u32 div2_ckbit : 1 ; // Default: 1;
++ u32 cutfb : 1 ; // Default: 0;
++ u32 res2 : 1 ; // Default: 0;
++ u32 clr_dpth : 2 ; // Default: 0;
++ u32 bypass_clrdpth : 1 ; // Default: 0;
++ u32 bcr : 1 ; // Default: 0;
++ u32 slv : 3 ; // Default: 4;
++ u32 res3 : 1 ; // Default: 0;
++ u32 envbs : 1 ; // Default: 0;
++ u32 bypass_ppll : 1 ; // Default: 0;
++ u32 cko_sel : 2 ; // Default: 0;
++ } bits;
++} HDMI_PLL_CTL0_t; //===================================================== 0x0058
++
++
++
++typedef union {
++ u32 dwval;
++ struct {
++ u32 int_cntrl : 3 ; // Default: 0x0;
++ u32 res0 : 1 ; // Default: 0;
++ u32 ref_cntrl : 2 ; // Default: 3;
++ u32 gear_shift : 1 ; // Default: 0;
++ u32 fast_tech : 1 ; // Default: 0;
++ u32 drv_ana : 1 ; // Default: 1;
++ u32 sckfb : 1 ; // Default: 0;
++ u32 sckref : 1 ; // Default: 0;
++ u32 reset : 1 ; // Default: 0;
++ u32 pwron : 1 ; // Default: 0;
++ u32 res1 : 3 ; // Default: 0;
++ u32 pixel_rep : 2 ; // Default: 0;
++ u32 sdm_en : 1 ; // Default: 0;
++ u32 pcnt_en : 1 ; // Default: 0;
++ u32 pcnt_n : 8 ; // Default: 0xE;
++ u32 res2 : 3 ; // Default: 0;
++ u32 ctrl_modle_clksrc : 1 ; // Default: 0;
++ } bits;
++} HDMI_PLL_CTL1_t; //===================================================== 0x005C
++
++typedef union {
++ u32 dwval;
++ struct {
++ u32 hdmi_afifo_error : 1 ; // Default: 0x0;
++ u32 hdmi_afifo_error_det : 1 ; // Default: 0x0;
++ u32 res0 : 30 ; // Default: 0;
++ } bits;
++} HDMI_AFIFO_CFG_t; //===================================================== 0x0060
++
++typedef union {
++ u32 dwval;
++ struct {
++ u32 fnpll_mash_en : 1 ; // Default: 0x0;
++ u32 fnpll_mash_mod : 2 ; // Default: 0x0;
++ u32 fnpll_mash_stp : 9 ; // Default: 0x0;
++ u32 fnpll_mash_m12 : 1 ; // Default: 0x0;
++ u32 fnpll_mash_frq : 2 ; // Default: 0x0;
++ u32 fnpll_mash_bot : 17 ; // Default: 0x0;
++ } bits;
++} HDMI_MODULATOR_CFG0_t; //===================================================== 0x0064
++
++typedef union {
++ u32 dwval;
++ struct {
++ u32 fnpll_mash_dth : 1 ; // Default: 0x0;
++ u32 fnpll_mash_fen : 1 ; // Default: 0x0;
++ u32 fnpll_mash_frc : 17 ; // Default: 0x0;
++ u32 fnpll_mash_fnv : 8 ; // Default: 0x0;
++ u32 res0 : 5 ; // Default: 0x0;
++ } bits;
++} HDMI_MODULATOR_CFG1_t; //===================================================== 0x0068
++
++typedef union {
++ u32 dwval;
++ struct {
++ u32 txdata_debugmode : 2 ; // Default: 0x0;
++ u32 res0 : 14 ; // Default: 0x0;
++ u32 ceci_debug : 1 ; // Default: 0x0;
++ u32 ceci_debugmode : 1 ; // Default: 0x0;
++ u32 res1 : 2 ; // Default: 0x0;
++ u32 sdai_debug : 1 ; // Default: 0x0;
++ u32 sdai_debugmode : 1 ; // Default: 0x0;
++ u32 res2 : 2 ; // Default: 0x0;
++ u32 scli_debug : 1 ; // Default: 0x0;
++ u32 scli_debugmode : 1 ; // Default: 0x0;
++ u32 res3 : 2 ; // Default: 0x0;
++ u32 hpdi_debug : 1 ; // Default: 0x0;
++ u32 hpdi_debugmode : 1 ; // Default: 0x0;
++ u32 res4 : 2 ; // Default: 0x0;
++ } bits;
++} HDMI_PHY_INDBG_CTRL_t; //================================================== 0x006C
++
++typedef union {
++ u32 dwval;
++ struct {
++ u32 txdata0_debug_data : 32 ; // Default: 0x0;
++ } bits;
++} HDMI_PHY_INDBG_TXD0_t; //================================================== 0x0070
++
++typedef union {
++ u32 dwval;
++ struct {
++ u32 txdata1_debug_data : 32 ; // Default: 0x0;
++ } bits;
++} HDMI_PHY_INDBG_TXD1_t; //================================================== 0x0074
++
++typedef union {
++ u32 dwval;
++ struct {
++ u32 txdata2_debug_data : 32 ; // Default: 0x0;
++ } bits;
++} HDMI_PHY_INDBG_TXD2_t; //================================================== 0x0078
++
++typedef union {
++ u32 dwval;
++ struct {
++ u32 txdata3_debug_data : 32 ; // Default: 0x0;
++ } bits;
++} HDMI_PHY_INDBG_TXD3_t; //================================================== 0x007C
++
++typedef union {
++ u32 dwval;
++ struct {
++ u32 tx_ready_dly_status : 1 ; // Default: 0x0;
++ u32 rxsense_dly_status : 1 ; // Default: 0x0;
++ u32 res0 : 2 ; // Default: 0x0;
++ u32 pll_lock_status : 1 ; // Default: 0x0;
++ u32 res1 : 3 ; // Default: 0x0;
++ u32 phy_resdo2d_status : 6 ; // Default: 0x0;
++ u32 res2 : 2 ; // Default: 0x0;
++ u32 phy_rcalend2d_status : 1 ; // Default: 0x0;
++ u32 phy_cout2d_status : 1 ; // Default: 0x0;
++ u32 res3 : 2 ; // Default: 0x0;
++ u32 phy_ceco_status : 1 ; // Default: 0x0;
++ u32 phy_sdao_status : 1 ; // Default: 0x0;
++ u32 phy_sclo_status : 1 ; // Default: 0x0;
++ u32 phy_hpdo_status : 1 ; // Default: 0x0;
++ u32 phy_cdetn_status : 3 ; // Default: 0x0;
++ u32 phy_cdetnck_status : 1 ; // Default: 0x0;
++ u32 phy_cdetp_status : 3 ; // Default: 0x0;
++ u32 phy_cdetpck_status : 1 ; // Default: 0x0;
++ } bits;
++} HDMI_PHY_PLL_STS_t; //===================================================== 0x0080
++
++typedef union {
++ u32 dwval;
++ struct {
++ u32 prbs_en : 1 ; // Default: 0x0;
++ u32 prbs_start : 1 ; // Default: 0x0;
++ u32 prbs_seq_gen : 1 ; // Default: 0x0;
++ u32 prbs_seq_chk : 1 ; // Default: 0x0;
++ u32 prbs_mode : 4 ; // Default: 0x0;
++ u32 prbs_type : 2 ; // Default: 0x0;
++ u32 prbs_clk_pol : 1 ; // Default: 0x0;
++ u32 res0 : 21 ; // Default: 0x0;
++ } bits;
++} HDMI_PRBS_CTL_t; //===================================================== 0x0084
++
++typedef union {
++ u32 dwval;
++ struct {
++ u32 prbs_seed_gen : 32 ; // Default: 0x0;
++ } bits;
++} HDMI_PRBS_SEED_GEN_t; //================================================= 0x0088
++
++typedef union {
++ u32 dwval;
++ struct {
++ u32 prbs_seed_chk : 32 ; // Default: 0x0;
++ } bits;
++} HDMI_PRBS_SEED_CHK_t; //================================================= 0x008C
++
++typedef union {
++ u32 dwval;
++ struct {
++ u32 prbs_seed_num : 32 ; // Default: 0x0;
++ } bits;
++} HDMI_PRBS_SEED_NUM_t; //================================================= 0x0090
++
++typedef union {
++ u32 dwval;
++ struct {
++ u32 prbs_cycle_num : 32 ; // Default: 0x0;
++ } bits;
++} HDMI_PRBS_CYCLE_NUM_t; //================================================= 0x0094
++
++typedef union {
++ u32 dwval;
++ struct {
++ u32 tx_ready_dly_count : 15 ; // Default: 0x0;
++ u32 tx_ready_dly_reset : 1 ; // Default: 0x0;
++ u32 rxsense_dly_count : 15 ; // Default: 0x0;
++ u32 rxsense_dly_reset : 1 ; // Default: 0x0;
++ } bits;
++} HDMI_PHY_PLL_ODLY_CFG_t; //================================================= 0x0098
++
++typedef union {
++ u32 dwval;
++ struct {
++ u32 clk_greate0_340m : 10 ; // Default: 0x3FF;
++ u32 clk_greate1_340m : 10 ; // Default: 0x3FF;
++ u32 clk_greate2_340m : 10 ; // Default: 0x3FF;
++ u32 en_ckdat : 1 ; // Default: 0x3FF;
++ u32 switch_clkch_data_corresponding : 1 ; // Default: 0x3FF;
++ } bits;
++} HDMI_PHY_CTL6_t; //========================================================= 0x009C
++
++typedef union {
++ u32 dwval;
++ struct {
++ u32 clk_greate3_340m : 10 ; // Default: 0x0;
++ u32 res0 : 2 ; // Default: 0x3FF;
++ u32 clk_low_340m : 10 ; // Default: 0x3FF;
++ u32 res1 : 10 ; // Default: 0x3FF;
++ } bits;
++} HDMI_PHY_CTL7_t; //========================================================= 0x00A0
++
++struct __aw_phy_reg_t {
++ u32 res[16]; /* 0x0 ~ 0x3c */
++ HDMI_PHY_CTL0_t phy_ctl0; /* 0x0040 */
++ HDMI_PHY_CTL1_t phy_ctl1; /* 0x0044 */
++ HDMI_PHY_CTL2_t phy_ctl2; /* 0x0048 */
++ HDMI_PHY_CTL3_t phy_ctl3; /* 0x004c */
++ HDMI_PHY_CTL4_t phy_ctl4; /* 0x0050 */
++ HDMI_PHY_CTL5_t phy_ctl5; /* 0x0054 */
++ HDMI_PLL_CTL0_t pll_ctl0; /* 0x0058 */
++ HDMI_PLL_CTL1_t pll_ctl1; /* 0x005c */
++ HDMI_AFIFO_CFG_t afifo_cfg; /* 0x0060 */
++ HDMI_MODULATOR_CFG0_t modulator_cfg0; /* 0x0064 */
++ HDMI_MODULATOR_CFG1_t modulator_cfg1; /* 0x0068 */
++ HDMI_PHY_INDBG_CTRL_t phy_indbg_ctrl; /* 0x006c */
++ HDMI_PHY_INDBG_TXD0_t phy_indbg_txd0; /* 0x0070 */
++ HDMI_PHY_INDBG_TXD1_t phy_indbg_txd1; /* 0x0074 */
++ HDMI_PHY_INDBG_TXD2_t phy_indbg_txd2; /* 0x0078 */
++ HDMI_PHY_INDBG_TXD3_t phy_indbg_txd3; /* 0x007c */
++ HDMI_PHY_PLL_STS_t phy_pll_sts; /* 0x0080 */
++ HDMI_PRBS_CTL_t prbs_ctl; /* 0x0084 */
++ HDMI_PRBS_SEED_GEN_t prbs_seed_gen; /* 0x0088 */
++ HDMI_PRBS_SEED_CHK_t prbs_seed_chk; /* 0x008c */
++ HDMI_PRBS_SEED_NUM_t prbs_seed_num; /* 0x0090 */
++ HDMI_PRBS_CYCLE_NUM_t prbs_cycle_num; /* 0x0094 */
++ HDMI_PHY_PLL_ODLY_CFG_t phy_pll_odly_cfg; /* 0x0098 */
++ HDMI_PHY_CTL6_t phy_ctl6; /* 0x009c */
++ HDMI_PHY_CTL7_t phy_ctl7; /* 0x00A0 */
++};
++
++#endif /* AW_PHY_H_ */
+--- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
++++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
+@@ -334,6 +334,7 @@ struct sun8i_hdmi_phy {
+ struct clk *clk_pll1;
+ struct device *dev;
+ unsigned int rcal;
++ void __iomem *base;
+ struct regmap *regs;
+ struct reset_control *rst_phy;
+ const struct sun8i_hdmi_phy_variant *variant;
+--- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
++++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
+@@ -9,6 +9,8 @@
+
+ #include "sun8i_dw_hdmi.h"
+
++#include "aw_phy.h"
++
+ /*
+ * Address can be actually any value. Here is set to same value as
+ * it is set in BSP driver.
+@@ -398,11 +400,164 @@ static const struct dw_hdmi_phy_ops sun8
+ .setup_hpd = dw_hdmi_phy_setup_hpd,
+ };
+
++static int sun20i_d1_hdmi_phy_enable(volatile struct __aw_phy_reg_t __iomem *phy_base)
++{
++ int i = 0, status = 0;
++
++ pr_info("enter %s\n", __func__);
++
++ //enib -> enldo -> enrcal -> encalog -> enbi[3:0] -> enck -> enp2s[3:0] -> enres -> enresck -> entx[3:0]
++ phy_base->phy_ctl4.bits.reg_slv = 4; //low power voltage 1.08V, default is 3, set 4 as well as pll_ctl0 bit [24:26]
++ phy_base->phy_ctl5.bits.enib = 1;
++ phy_base->phy_ctl0.bits.enldo = 1;
++ phy_base->phy_ctl0.bits.enldo_fs = 1;
++ phy_base->phy_ctl5.bits.enrcal = 1;
++
++ phy_base->phy_ctl5.bits.encalog = 1;
++
++ for (i = 0; i < AW_PHY_TIMEOUT; i++) {
++ udelay(5);
++ status = phy_base->phy_pll_sts.bits.phy_rcalend2d_status;
++ if (status & 0x1) {
++ pr_info("[%s]:phy_rcalend2d_status\n", __func__);
++ break;
++ }
++ }
++ if ((i == AW_PHY_TIMEOUT) && !status) {
++ pr_err("phy_rcalend2d_status Timeout !\n");
++ return -1;
++ }
++
++ phy_base->phy_ctl0.bits.enbi = 0xF;
++ for (i = 0; i < AW_PHY_TIMEOUT; i++) {
++ udelay(5);
++ status = phy_base->phy_pll_sts.bits.pll_lock_status;
++ if (status & 0x1) {
++ pr_info("[%s]:pll_lock_status\n", __func__);
++ break;
++ }
++ }
++ if ((i == AW_PHY_TIMEOUT) && !status) {
++ pr_err("pll_lock_status Timeout! status = 0x%x\n", status);
++ return -1;
++ }
++
++ phy_base->phy_ctl0.bits.enck = 1;
++ phy_base->phy_ctl5.bits.enp2s = 0xF;
++ phy_base->phy_ctl5.bits.enres = 1;
++ phy_base->phy_ctl5.bits.enresck = 1;
++ phy_base->phy_ctl0.bits.entx = 0xF;
++
++ for (i = 0; i < AW_PHY_TIMEOUT; i++) {
++ udelay(5);
++ status = phy_base->phy_pll_sts.bits.tx_ready_dly_status;
++ if (status & 0x1) {
++ pr_info("[%s]:tx_ready_status\n", __func__);
++ break;
++ }
++ }
++ if ((i == AW_PHY_TIMEOUT) && !status) {
++ pr_err("tx_ready_status Timeout ! status = 0x%x\n", status);
++ return -1;
++ }
++
++ return 0;
++}
++
+ static int sun20i_d1_hdmi_phy_config(struct dw_hdmi *hdmi, void *data,
+ const struct drm_display_info *display,
+ const struct drm_display_mode *mode)
+ {
+ struct sun8i_hdmi_phy *phy = data;
++ volatile struct __aw_phy_reg_t __iomem *phy_base = phy->base;
++ int ret;
++
++ pr_info("enter %s\n", __func__);
++
++ /* enable all channel */
++ phy_base->phy_ctl5.bits.reg_p1opt = 0xF;
++
++ // phy_reset
++ phy_base->phy_ctl0.bits.entx = 0;
++ phy_base->phy_ctl5.bits.enresck = 0;
++ phy_base->phy_ctl5.bits.enres = 0;
++ phy_base->phy_ctl5.bits.enp2s = 0;
++ phy_base->phy_ctl0.bits.enck = 0;
++ phy_base->phy_ctl0.bits.enbi = 0;
++ phy_base->phy_ctl5.bits.encalog = 0;
++ phy_base->phy_ctl5.bits.enrcal = 0;
++ phy_base->phy_ctl0.bits.enldo_fs = 0;
++ phy_base->phy_ctl0.bits.enldo = 0;
++ phy_base->phy_ctl5.bits.enib = 0;
++ phy_base->pll_ctl1.bits.reset = 1;
++ phy_base->pll_ctl1.bits.pwron = 0;
++ phy_base->pll_ctl0.bits.envbs = 0;
++
++ // phy_set_mpll
++ phy_base->pll_ctl0.bits.cko_sel = 0x3;
++ phy_base->pll_ctl0.bits.bypass_ppll = 0x1;
++ phy_base->pll_ctl1.bits.drv_ana = 1;
++ phy_base->pll_ctl1.bits.ctrl_modle_clksrc = 0x0; //0: PLL_video 1: MPLL
++ phy_base->pll_ctl1.bits.sdm_en = 0x0; //mpll sdm jitter is very large, not used for the time being
++ phy_base->pll_ctl1.bits.sckref = 0; //default value is 1
++ phy_base->pll_ctl0.bits.slv = 4;
++ phy_base->pll_ctl0.bits.prop_cntrl = 7; //default value 7
++ phy_base->pll_ctl0.bits.gmp_cntrl = 3; //default value 1
++ phy_base->pll_ctl1.bits.ref_cntrl = 0;
++ phy_base->pll_ctl0.bits.vcorange = 1;
++
++ // phy_set_div
++ phy_base->pll_ctl0.bits.div_pre = 0; //div7 = n+1
++ phy_base->pll_ctl1.bits.pcnt_en = 0;
++ phy_base->pll_ctl1.bits.pcnt_n = 1; //div6 = 1 (pcnt_en=0) [div6 = n (pcnt_en = 1) note that some multiples are problematic] 4-256
++ phy_base->pll_ctl1.bits.pixel_rep = 0; //div5 = n+1
++ phy_base->pll_ctl0.bits.bypass_clrdpth = 0;
++ phy_base->pll_ctl0.bits.clr_dpth = 0; //div4 = 1 (bypass_clrdpth = 0)
++ //00: 2 01: 2.5 10: 3 11: 4
++ phy_base->pll_ctl0.bits.n_cntrl = 1; //div
++ phy_base->pll_ctl0.bits.div2_ckbit = 0; //div1 = n+1
++ phy_base->pll_ctl0.bits.div2_cktmds = 0; //div2 = n+1
++ phy_base->pll_ctl0.bits.bcr = 0; //div3 0: [1:10] 1: [1:40]
++ phy_base->pll_ctl1.bits.pwron = 1;
++ phy_base->pll_ctl1.bits.reset = 0;
++
++ // configure phy
++ /* config values taken from table */
++ phy_base->phy_ctl1.dwval = ((phy_base->phy_ctl1.dwval & 0xFFC0FFFF) | /* config->phy_ctl1 */ 0x0);
++ phy_base->phy_ctl2.dwval = ((phy_base->phy_ctl2.dwval & 0xFF000000) | /* config->phy_ctl2 */ 0x0);
++ phy_base->phy_ctl3.dwval = ((phy_base->phy_ctl3.dwval & 0xFFFF0000) | /* config->phy_ctl3 */ 0xFFFF);
++ phy_base->phy_ctl4.dwval = ((phy_base->phy_ctl4.dwval & 0xE0000000) | /* config->phy_ctl4 */ 0xC0D0D0D);
++ //phy_base->pll_ctl0.dwval |= config->pll_ctl0;
++ //phy_base->pll_ctl1.dwval |= config->pll_ctl1;
++
++ // phy_set_clk
++ phy_base->phy_ctl6.bits.switch_clkch_data_corresponding = 0;
++ phy_base->phy_ctl6.bits.clk_greate0_340m = 0x3FF;
++ phy_base->phy_ctl6.bits.clk_greate1_340m = 0x3FF;
++ phy_base->phy_ctl6.bits.clk_greate2_340m = 0x0;
++ phy_base->phy_ctl7.bits.clk_greate3_340m = 0x0;
++ phy_base->phy_ctl7.bits.clk_low_340m = 0x3E0;
++ phy_base->phy_ctl6.bits.en_ckdat = 1; //default value is 0
++
++ // phy_base->phy_ctl2.bits.reg_resdi = 0x18;
++ // phy_base->phy_ctl4.bits.reg_slv = 3; //low power voltage 1.08V, default value is 3
++
++ phy_base->phy_ctl1.bits.res_scktmds = 0; //
++ phy_base->phy_ctl0.bits.reg_csmps = 2;
++ phy_base->phy_ctl0.bits.reg_ck_test_sel = 0; //?
++ phy_base->phy_ctl0.bits.reg_ck_sel = 1;
++ phy_base->phy_indbg_ctrl.bits.txdata_debugmode = 0;
++
++ // phy_enable
++ ret = sun20i_d1_hdmi_phy_enable(phy_base);
++ if (ret)
++ return ret;
++
++ phy_base->phy_ctl0.bits.sda_en = 1;
++ phy_base->phy_ctl0.bits.scl_en = 1;
++ phy_base->phy_ctl0.bits.hpd_en = 1;
++ phy_base->phy_ctl0.bits.reg_den = 0xF;
++ phy_base->pll_ctl0.bits.envbs = 1;
+
+ return 0;
+ }
+@@ -720,6 +875,7 @@ static int sun8i_hdmi_phy_probe(struct p
+ return dev_err_probe(dev, PTR_ERR(regs),
+ "Couldn't map the HDMI PHY registers\n");
+
++ phy->base = regs;
+ phy->regs = devm_regmap_init_mmio(dev, regs,
+ &sun8i_hdmi_phy_regmap_config);
+ if (IS_ERR(phy->regs))
--- /dev/null
+From 02a412de18479449c87ed7a332e3fe33d2eff3a4 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Wed, 27 Apr 2022 18:47:53 -0500
+Subject: [PATCH 010/117] riscv: mm: Use IOMMU for DMA when available
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ arch/riscv/mm/dma-noncoherent.c | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/arch/riscv/mm/dma-noncoherent.c
++++ b/arch/riscv/mm/dma-noncoherent.c
+@@ -7,6 +7,7 @@
+
+ #include <linux/dma-direct.h>
+ #include <linux/dma-map-ops.h>
++#include <linux/iommu.h>
+ #include <linux/mm.h>
+ #include <asm/cacheflush.h>
+
+@@ -70,6 +71,9 @@ void arch_setup_dma_ops(struct device *d
+ dev_driver_string(dev), dev_name(dev));
+
+ dev->dma_coherent = coherent;
++
++ if (iommu)
++ iommu_setup_dma_ops(dev, dma_base, dma_base + size - 1);
+ }
+
+ void riscv_noncoherent_supported(void)
--- /dev/null
+From ee6459d60f24d91052f0288155f44e6a7f991050 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sat, 7 May 2022 18:34:25 -0500
+Subject: [PATCH 011/117] genirq: Add support for oneshot-safe threaded EOIs
+
+irqchips can use the combination of flags IRQCHIP_ONESHOT_SAFE |
+IRQCHIP_EOI_THREADED to elide mask operations.
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ kernel/irq/chip.c | 36 +++++++++++++++++-------------------
+ kernel/irq/internals.h | 2 +-
+ kernel/irq/manage.c | 12 ++++++------
+ 3 files changed, 24 insertions(+), 26 deletions(-)
+
+--- a/kernel/irq/chip.c
++++ b/kernel/irq/chip.c
+@@ -439,16 +439,6 @@ void unmask_irq(struct irq_desc *desc)
+ }
+ }
+
+-void unmask_threaded_irq(struct irq_desc *desc)
+-{
+- struct irq_chip *chip = desc->irq_data.chip;
+-
+- if (chip->flags & IRQCHIP_EOI_THREADED)
+- chip->irq_eoi(&desc->irq_data);
+-
+- unmask_irq(desc);
+-}
+-
+ /*
+ * handle_nested_irq - Handle a nested irq from a irq thread
+ * @irq: the interrupt number
+@@ -656,25 +646,33 @@ out_unlock:
+ }
+ EXPORT_SYMBOL_GPL(handle_level_irq);
+
+-static void cond_unmask_eoi_irq(struct irq_desc *desc, struct irq_chip *chip)
++void unmask_eoi_threaded_irq(struct irq_desc *desc)
+ {
+- if (!(desc->istate & IRQS_ONESHOT)) {
++ struct irq_chip *chip = desc->irq_data.chip;
++
++ if (desc->istate & IRQS_ONESHOT)
++ unmask_irq(desc);
++
++ if (chip->flags & IRQCHIP_EOI_THREADED)
+ chip->irq_eoi(&desc->irq_data);
++}
++
++static void cond_unmask_eoi_irq(struct irq_desc *desc, struct irq_chip *chip)
++{
++ /* Do not send EOI if the thread will do it for us. */
++ if ((chip->flags & IRQCHIP_EOI_THREADED) && desc->threads_oneshot)
+ return;
+- }
++
+ /*
+ * We need to unmask in the following cases:
+ * - Oneshot irq which did not wake the thread (caused by a
+ * spurious interrupt or a primary handler handling it
+ * completely).
+ */
+- if (!irqd_irq_disabled(&desc->irq_data) &&
+- irqd_irq_masked(&desc->irq_data) && !desc->threads_oneshot) {
+- chip->irq_eoi(&desc->irq_data);
++ if ((desc->istate & IRQS_ONESHOT) && !desc->threads_oneshot)
+ unmask_irq(desc);
+- } else if (!(chip->flags & IRQCHIP_EOI_THREADED)) {
+- chip->irq_eoi(&desc->irq_data);
+- }
++
++ chip->irq_eoi(&desc->irq_data);
+ }
+
+ /**
+--- a/kernel/irq/internals.h
++++ b/kernel/irq/internals.h
+@@ -93,7 +93,7 @@ extern void irq_percpu_enable(struct irq
+ extern void irq_percpu_disable(struct irq_desc *desc, unsigned int cpu);
+ extern void mask_irq(struct irq_desc *desc);
+ extern void unmask_irq(struct irq_desc *desc);
+-extern void unmask_threaded_irq(struct irq_desc *desc);
++extern void unmask_eoi_threaded_irq(struct irq_desc *desc);
+
+ #ifdef CONFIG_SPARSE_IRQ
+ static inline void irq_mark_irq(unsigned int irq) { }
+--- a/kernel/irq/manage.c
++++ b/kernel/irq/manage.c
+@@ -1074,9 +1074,9 @@ static int irq_wait_for_interrupt(struct
+ static void irq_finalize_oneshot(struct irq_desc *desc,
+ struct irqaction *action)
+ {
+- if (!(desc->istate & IRQS_ONESHOT) ||
+- action->handler == irq_forced_secondary_handler)
++ if (action->handler == irq_forced_secondary_handler)
+ return;
++
+ again:
+ chip_bus_lock(desc);
+ raw_spin_lock_irq(&desc->lock);
+@@ -1112,9 +1112,8 @@ again:
+
+ desc->threads_oneshot &= ~action->thread_mask;
+
+- if (!desc->threads_oneshot && !irqd_irq_disabled(&desc->irq_data) &&
+- irqd_irq_masked(&desc->irq_data))
+- unmask_threaded_irq(desc);
++ if (!desc->threads_oneshot)
++ unmask_eoi_threaded_irq(desc);
+
+ out_unlock:
+ raw_spin_unlock_irq(&desc->lock);
+@@ -1662,7 +1661,8 @@ __setup_irq(unsigned int irq, struct irq
+ * !ONESHOT irqs the thread mask is 0 so we can avoid a
+ * conditional in irq_wake_thread().
+ */
+- if (new->flags & IRQF_ONESHOT) {
++ if ((new->flags & IRQF_ONESHOT) ||
++ (desc->irq_data.chip->flags & (IRQCHIP_ONESHOT_SAFE | IRQCHIP_EOI_THREADED)) == (IRQCHIP_ONESHOT_SAFE | IRQCHIP_EOI_THREADED)) {
+ /*
+ * Unlikely to have 32 resp 64 irqs sharing one line,
+ * but who knows.
--- /dev/null
+From 1fbe96ec05c41b313b4e7cc4b39b191b4a3f7540 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sat, 7 May 2022 18:38:34 -0500
+Subject: [PATCH 012/117] irqchip/sifive-plic: Enable oneshot-safe threaded
+ EOIs
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ drivers/irqchip/irq-sifive-plic.c | 4 +++-
+ 1 file changed, 3 insertions(+), 1 deletion(-)
+
+--- a/drivers/irqchip/irq-sifive-plic.c
++++ b/drivers/irqchip/irq-sifive-plic.c
+@@ -207,7 +207,9 @@ static struct irq_chip plic_chip = {
+ .irq_set_affinity = plic_set_affinity,
+ #endif
+ .irq_set_type = plic_irq_set_type,
+- .flags = IRQCHIP_AFFINITY_PRE_STARTUP,
++ .flags = IRQCHIP_ONESHOT_SAFE |
++ IRQCHIP_EOI_THREADED |
++ IRQCHIP_AFFINITY_PRE_STARTUP,
+ };
+
+ static int plic_irq_set_type(struct irq_data *d, unsigned int type)
--- /dev/null
+From d6cf6473b0aaec455e48bccefe318a98a87b789f Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sat, 28 May 2022 19:04:56 -0500
+Subject: [PATCH 013/117] irqchip/sifive-plic: Support wake IRQs
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ drivers/irqchip/irq-sifive-plic.c | 6 ++++--
+ 1 file changed, 4 insertions(+), 2 deletions(-)
+
+--- a/drivers/irqchip/irq-sifive-plic.c
++++ b/drivers/irqchip/irq-sifive-plic.c
+@@ -193,7 +193,8 @@ static struct irq_chip plic_edge_chip =
+ .irq_set_affinity = plic_set_affinity,
+ #endif
+ .irq_set_type = plic_irq_set_type,
+- .flags = IRQCHIP_AFFINITY_PRE_STARTUP,
++ .flags = IRQCHIP_SKIP_SET_WAKE |
++ IRQCHIP_AFFINITY_PRE_STARTUP,
+ };
+
+ static struct irq_chip plic_chip = {
+@@ -207,7 +208,8 @@ static struct irq_chip plic_chip = {
+ .irq_set_affinity = plic_set_affinity,
+ #endif
+ .irq_set_type = plic_irq_set_type,
+- .flags = IRQCHIP_ONESHOT_SAFE |
++ .flags = IRQCHIP_SKIP_SET_WAKE |
++ IRQCHIP_ONESHOT_SAFE |
+ IRQCHIP_EOI_THREADED |
+ IRQCHIP_AFFINITY_PRE_STARTUP,
+ };
--- /dev/null
+From 0e871e791a2530562851109346affa1c0d9987e0 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sun, 13 Jun 2021 23:15:56 -0500
+Subject: [PATCH 014/117] mmc: sunxi-mmc: Correct the maximum segment size
+
+According to the DMA descriptor documentation, the lowest two bits of
+the size field are ignored, so the size must be rounded up to a multiple
+of 4 bytes. Furthermore, 0 is not a valid buffer size; setting the size
+to 0 will cause that DMA descriptor to be ignored.
+
+Together, these restrictions limit the maximum DMA segment size to 4
+less than the power-of-two width of the size field.
+
+Series-to: Ulf Hansson <ulf.hansson@linaro.org>
+Series-to: linux-mmc@vger.kernel.org
+
+Fixes: 3cbcb16095f9 ("mmc: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs")
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ drivers/mmc/host/sunxi-mmc.c | 14 ++++++++------
+ 1 file changed, 8 insertions(+), 6 deletions(-)
+
+--- a/drivers/mmc/host/sunxi-mmc.c
++++ b/drivers/mmc/host/sunxi-mmc.c
+@@ -214,6 +214,9 @@
+ #define SDXC_IDMAC_DES0_CES BIT(30) /* card error summary */
+ #define SDXC_IDMAC_DES0_OWN BIT(31) /* 1-idma owns it, 0-host owns it */
+
++/* Buffer size must be a multiple of 4 bytes. */
++#define SDXC_IDMAC_SIZE_ALIGN 4
++
+ #define SDXC_CLK_400K 0
+ #define SDXC_CLK_25M 1
+ #define SDXC_CLK_50M 2
+@@ -361,17 +364,15 @@ static void sunxi_mmc_init_idma_des(stru
+ {
+ struct sunxi_idma_des *pdes = (struct sunxi_idma_des *)host->sg_cpu;
+ dma_addr_t next_desc = host->sg_dma;
+- int i, max_len = (1 << host->cfg->idma_des_size_bits);
++ int i;
+
+ for (i = 0; i < data->sg_len; i++) {
+ pdes[i].config = cpu_to_le32(SDXC_IDMAC_DES0_CH |
+ SDXC_IDMAC_DES0_OWN |
+ SDXC_IDMAC_DES0_DIC);
+
+- if (data->sg[i].length == max_len)
+- pdes[i].buf_size = 0; /* 0 == max_len */
+- else
+- pdes[i].buf_size = cpu_to_le32(data->sg[i].length);
++ pdes[i].buf_size = cpu_to_le32(ALIGN(data->sg[i].length,
++ SDXC_IDMAC_SIZE_ALIGN));
+
+ next_desc += sizeof(struct sunxi_idma_des);
+ pdes[i].buf_addr_ptr1 =
+@@ -1421,7 +1422,8 @@ static int sunxi_mmc_probe(struct platfo
+ mmc->max_blk_count = 8192;
+ mmc->max_blk_size = 4096;
+ mmc->max_segs = PAGE_SIZE / sizeof(struct sunxi_idma_des);
+- mmc->max_seg_size = (1 << host->cfg->idma_des_size_bits);
++ mmc->max_seg_size = (1 << host->cfg->idma_des_size_bits) -
++ SDXC_IDMAC_SIZE_ALIGN;
+ mmc->max_req_size = mmc->max_seg_size * mmc->max_segs;
+ /* 400kHz ~ 52MHz */
+ mmc->f_min = 400000;
--- /dev/null
+From a8e905fb3fd0d26f724646275b72a7363b2f03d8 Mon Sep 17 00:00:00 2001
+From: Max Fierke <max@maxfierke.com>
+Date: Wed, 1 Jun 2022 00:17:47 -0500
+Subject: [PATCH 015/117] dt-bindings: display: Add bindings for ClockworkPi
+ CWD686
+
+The CWD686 is a 6.86" IPS LCD panel used as the primary
+display in the ClockworkPi DevTerm portable (all cores)
+
+Signed-off-by: Max Fierke <max@maxfierke.com>
+Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ .../display/panel/clockwork,cwd686.yaml | 62 +++++++++++++++++++
+ 1 file changed, 62 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/display/panel/clockwork,cwd686.yaml
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/display/panel/clockwork,cwd686.yaml
+@@ -0,0 +1,62 @@
++# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
++%YAML 1.2
++---
++$id: http://devicetree.org/schemas/display/panel/clockwork,cwd686.yaml#
++$schema: http://devicetree.org/meta-schemas/core.yaml#
++
++title: Clockwork CWD686 6.86" IPS LCD panel
++
++maintainers:
++ - Max Fierke <max@maxfierke.com>
++
++description: |
++ The Clockwork CWD686 is a 6.86" ICNL9707-based IPS LCD panel used within the
++ Clockwork DevTerm series of portable devices. The panel has a 480x1280
++ resolution and uses 24 bit RGB per pixel.
++
++allOf:
++ - $ref: panel-common.yaml#
++
++properties:
++ compatible:
++ const: clockwork,cwd686
++
++ reg:
++ description: DSI virtual channel used by that screen
++ maxItems: 1
++
++ reset-gpios: true
++ rotation: true
++ backlight: true
++ iovcc-supply: true
++ vci-supply: true
++
++required:
++ - compatible
++ - reg
++ - backlight
++ - reset-gpios
++
++additionalProperties: false
++
++examples:
++ - |
++ #include <dt-bindings/gpio/gpio.h>
++
++ backlight: backlight {
++ compatible = "gpio-backlight";
++ gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
++ };
++
++ dsi {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ panel@0 {
++ compatible = "clockwork,cwd686";
++ reg = <0>;
++ backlight = <&backlight>;
++ reset-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
++ rotation = <90>;
++ };
++ };
--- /dev/null
+From d290546a88694dde6d2f64a973cd62ff2c69e27e Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Fri, 12 Aug 2022 01:59:35 -0500
+Subject: [PATCH 016/117] dt-bindings: display: Add Sitronix ST7701s panel
+ binding
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ .../display/panel/sitronix,st7701s.yaml | 32 +++++++++++++++++++
+ 1 file changed, 32 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/display/panel/sitronix,st7701s.yaml
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/display/panel/sitronix,st7701s.yaml
+@@ -0,0 +1,32 @@
++# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
++%YAML 1.2
++---
++$id: http://devicetree.org/schemas/display/panel/sitronix,st7701s.yaml#
++$schema: http://devicetree.org/meta-schemas/core.yaml#
++
++title: Sitronix ST7701 based LCD panels
++
++maintainers:
++ - Samuel Holland <samuel@sholland.org>
++
++description: |
++ Panel used on Lichee RV 86 Panel
++
++allOf:
++ - $ref: panel-common.yaml#
++ - $ref: /schemas/spi/spi-peripheral-props.yaml#
++
++properties:
++ compatible:
++ items:
++ - const: sitronix,st7701s
++
++ backlight: true
++
++ reset-gpios: true
++
++required:
++ - compatible
++ - reset-gpios
++
++unevaluatedProperties: false
--- /dev/null
+From 9d9b8bd567c30a821c82c27035243536c5234542 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Tue, 29 Mar 2022 22:47:57 -0500
+Subject: [PATCH 017/117] drm/panel: Add driver for ST7701s DPI LCD panel
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ drivers/gpu/drm/panel/Kconfig | 8 +
+ drivers/gpu/drm/panel/Makefile | 1 +
+ .../gpu/drm/panel/panel-sitronix-st7701s.c | 444 ++++++++++++++++++
+ 3 files changed, 453 insertions(+)
+ create mode 100644 drivers/gpu/drm/panel/panel-sitronix-st7701s.c
+
+--- a/drivers/gpu/drm/panel/Kconfig
++++ b/drivers/gpu/drm/panel/Kconfig
+@@ -608,6 +608,14 @@ config DRM_PANEL_SITRONIX_ST7701
+ ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
+ system interfaces.
+
++config DRM_PANEL_SITRONIX_ST7701S
++ tristate "Sitronix ST7701s panel driver"
++ depends on OF
++ depends on BACKLIGHT_CLASS_DEVICE
++ help
++ Say Y here if you want to enable support for the Sitronix
++ ST7701s controller with a SPI interface.
++
+ config DRM_PANEL_SITRONIX_ST7703
+ tristate "Sitronix ST7703 based MIPI touchscreen panels"
+ depends on OF
+--- a/drivers/gpu/drm/panel/Makefile
++++ b/drivers/gpu/drm/panel/Makefile
+@@ -61,6 +61,7 @@ obj-$(CONFIG_DRM_PANEL_SHARP_LS037V7DW01
+ obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o
+ obj-$(CONFIG_DRM_PANEL_SHARP_LS060T1SX01) += panel-sharp-ls060t1sx01.o
+ obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7701) += panel-sitronix-st7701.o
++obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7701S) += panel-sitronix-st7701s.o
+ obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7703) += panel-sitronix-st7703.o
+ obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
+ obj-$(CONFIG_DRM_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
+--- /dev/null
++++ b/drivers/gpu/drm/panel/panel-sitronix-st7701s.c
+@@ -0,0 +1,444 @@
++// SPDX-License-Identifier: GPL-2.0-only
++/*
++ * Copyright (C) 2017 Free Electrons
++ */
++
++#include <linux/delay.h>
++#include <linux/gpio/consumer.h>
++#include <linux/module.h>
++#include <linux/spi/spi.h>
++
++#include <video/mipi_display.h>
++
++#include <drm/drm_device.h>
++#include <drm/drm_modes.h>
++#include <drm/drm_panel.h>
++
++struct st7701s {
++ struct drm_panel panel;
++ struct gpio_desc *reset;
++ struct spi_device *spi;
++};
++
++enum {
++ ST7789V_COMMAND = 0 << 8,
++ ST7789V_DATA = 1 << 8,
++};
++
++#define LCD_WRITE_COMMAND(x) (ST7789V_COMMAND | (x))
++#define LCD_WRITE_DATA(x) (ST7789V_DATA | (x))
++
++static const u16 st7701s_init_sequence_1[] = {
++ LCD_WRITE_COMMAND(0xFF),
++ LCD_WRITE_DATA(0x77),
++ LCD_WRITE_DATA(0x01),
++ LCD_WRITE_DATA(0x00),
++ LCD_WRITE_DATA(0x00),
++ LCD_WRITE_DATA(0x10),
++
++ LCD_WRITE_COMMAND(0xC0),
++ LCD_WRITE_DATA(0x3B),
++ LCD_WRITE_DATA(0x00),
++
++ LCD_WRITE_COMMAND(0xC1),
++ LCD_WRITE_DATA(0x0D),
++ LCD_WRITE_DATA(0x02),
++
++ LCD_WRITE_COMMAND(0xC2),
++ LCD_WRITE_DATA(0x21),
++ LCD_WRITE_DATA(0x08),
++
++ // RGB Interface Setting
++ // LCD_WRITE_COMMAND(0xC3),
++ // LCD_WRITE_DATA(0x02),
++
++ LCD_WRITE_COMMAND(0xCD),
++ LCD_WRITE_DATA(0x18),//0F 08-OK D0-D18
++
++ LCD_WRITE_COMMAND(0xB0),
++ LCD_WRITE_DATA(0x00),
++ LCD_WRITE_DATA(0x11),
++ LCD_WRITE_DATA(0x18),
++ LCD_WRITE_DATA(0x0E),
++ LCD_WRITE_DATA(0x11),
++ LCD_WRITE_DATA(0x06),
++ LCD_WRITE_DATA(0x07),
++ LCD_WRITE_DATA(0x08),
++ LCD_WRITE_DATA(0x07),
++ LCD_WRITE_DATA(0x22),
++ LCD_WRITE_DATA(0x04),
++ LCD_WRITE_DATA(0x12),
++ LCD_WRITE_DATA(0x0F),
++ LCD_WRITE_DATA(0xAA),
++ LCD_WRITE_DATA(0x31),
++ LCD_WRITE_DATA(0x18),
++
++ LCD_WRITE_COMMAND(0xB1),
++ LCD_WRITE_DATA(0x00),
++ LCD_WRITE_DATA(0x11),
++ LCD_WRITE_DATA(0x19),
++ LCD_WRITE_DATA(0x0E),
++ LCD_WRITE_DATA(0x12),
++ LCD_WRITE_DATA(0x07),
++ LCD_WRITE_DATA(0x08),
++ LCD_WRITE_DATA(0x08),
++ LCD_WRITE_DATA(0x08),
++ LCD_WRITE_DATA(0x22),
++ LCD_WRITE_DATA(0x04),
++ LCD_WRITE_DATA(0x11),
++ LCD_WRITE_DATA(0x11),
++ LCD_WRITE_DATA(0xA9),
++ LCD_WRITE_DATA(0x32),
++ LCD_WRITE_DATA(0x18),
++
++ LCD_WRITE_COMMAND(0xFF),
++ LCD_WRITE_DATA(0x77),
++ LCD_WRITE_DATA(0x01),
++ LCD_WRITE_DATA(0x00),
++ LCD_WRITE_DATA(0x00),
++ LCD_WRITE_DATA(0x11),
++
++ LCD_WRITE_COMMAND(0xB0),
++ LCD_WRITE_DATA(0x60),
++
++ LCD_WRITE_COMMAND(0xB1),
++ LCD_WRITE_DATA(0x30),
++
++ LCD_WRITE_COMMAND(0xB2),
++ LCD_WRITE_DATA(0x87),
++
++ LCD_WRITE_COMMAND(0xB3),
++ LCD_WRITE_DATA(0x80),
++
++ LCD_WRITE_COMMAND(0xB5),
++ LCD_WRITE_DATA(0x49),
++
++ LCD_WRITE_COMMAND(0xB7),
++ LCD_WRITE_DATA(0x85),
++
++ LCD_WRITE_COMMAND(0xB8),
++ LCD_WRITE_DATA(0x21),
++
++ LCD_WRITE_COMMAND(0xC1),
++ LCD_WRITE_DATA(0x78),
++
++ LCD_WRITE_COMMAND(0xC2),
++ LCD_WRITE_DATA(0x78),
++};
++
++static const u16 st7701s_init_sequence_2[] = {
++ LCD_WRITE_COMMAND(0xE0),
++ LCD_WRITE_DATA(0x00),
++ LCD_WRITE_DATA(0x1B),
++ LCD_WRITE_DATA(0x02),
++
++ LCD_WRITE_COMMAND(0xE1),
++ LCD_WRITE_DATA(0x08),
++ LCD_WRITE_DATA(0xA0),
++ LCD_WRITE_DATA(0x00),
++ LCD_WRITE_DATA(0x00),
++ LCD_WRITE_DATA(0x07),
++ LCD_WRITE_DATA(0xA0),
++ LCD_WRITE_DATA(0x00),
++ LCD_WRITE_DATA(0x00),
++ LCD_WRITE_DATA(0x00),
++ LCD_WRITE_DATA(0x44),
++ LCD_WRITE_DATA(0x44),
++
++ LCD_WRITE_COMMAND(0xE2),
++ LCD_WRITE_DATA(0x11),
++ LCD_WRITE_DATA(0x11),
++ LCD_WRITE_DATA(0x44),
++ LCD_WRITE_DATA(0x44),
++ LCD_WRITE_DATA(0xED),
++ LCD_WRITE_DATA(0xA0),
++ LCD_WRITE_DATA(0x00),
++ LCD_WRITE_DATA(0x00),
++ LCD_WRITE_DATA(0xEC),
++ LCD_WRITE_DATA(0xA0),
++ LCD_WRITE_DATA(0x00),
++ LCD_WRITE_DATA(0x00),
++
++ LCD_WRITE_COMMAND(0xE3),
++ LCD_WRITE_DATA(0x00),
++ LCD_WRITE_DATA(0x00),
++ LCD_WRITE_DATA(0x11),
++ LCD_WRITE_DATA(0x11),
++
++ LCD_WRITE_COMMAND(0xE4),
++ LCD_WRITE_DATA(0x44),
++ LCD_WRITE_DATA(0x44),
++
++ LCD_WRITE_COMMAND(0xE5),
++ LCD_WRITE_DATA(0x0A),
++ LCD_WRITE_DATA(0xE9),
++ LCD_WRITE_DATA(0xD8),
++ LCD_WRITE_DATA(0xA0),
++ LCD_WRITE_DATA(0x0C),
++ LCD_WRITE_DATA(0xEB),
++ LCD_WRITE_DATA(0xD8),
++ LCD_WRITE_DATA(0xA0),
++ LCD_WRITE_DATA(0x0E),
++ LCD_WRITE_DATA(0xED),
++ LCD_WRITE_DATA(0xD8),
++ LCD_WRITE_DATA(0xA0),
++ LCD_WRITE_DATA(0x10),
++ LCD_WRITE_DATA(0xEF),
++ LCD_WRITE_DATA(0xD8),
++ LCD_WRITE_DATA(0xA0),
++
++ LCD_WRITE_COMMAND(0xE6),
++ LCD_WRITE_DATA(0x00),
++ LCD_WRITE_DATA(0x00),
++ LCD_WRITE_DATA(0x11),
++ LCD_WRITE_DATA(0x11),
++
++ LCD_WRITE_COMMAND(0xE7),
++ LCD_WRITE_DATA(0x44),
++ LCD_WRITE_DATA(0x44),
++
++ LCD_WRITE_COMMAND(0xE8),
++ LCD_WRITE_DATA(0x09),
++ LCD_WRITE_DATA(0xE8),
++ LCD_WRITE_DATA(0xD8),
++ LCD_WRITE_DATA(0xA0),
++ LCD_WRITE_DATA(0x0B),
++ LCD_WRITE_DATA(0xEA),
++ LCD_WRITE_DATA(0xD8),
++ LCD_WRITE_DATA(0xA0),
++ LCD_WRITE_DATA(0x0D),
++ LCD_WRITE_DATA(0xEC),
++ LCD_WRITE_DATA(0xD8),
++ LCD_WRITE_DATA(0xA0),
++ LCD_WRITE_DATA(0x0F),
++ LCD_WRITE_DATA(0xEE),
++ LCD_WRITE_DATA(0xD8),
++ LCD_WRITE_DATA(0xA0),
++
++ LCD_WRITE_COMMAND(0xEB),
++ LCD_WRITE_DATA(0x02),
++ LCD_WRITE_DATA(0x00),
++ LCD_WRITE_DATA(0xE4),
++ LCD_WRITE_DATA(0xE4),
++ LCD_WRITE_DATA(0x88),
++ LCD_WRITE_DATA(0x00),
++ LCD_WRITE_DATA(0x40),
++
++ LCD_WRITE_COMMAND(0xEC),
++ LCD_WRITE_DATA(0x3C),
++ LCD_WRITE_DATA(0x00),
++
++ LCD_WRITE_COMMAND(0xED),
++ LCD_WRITE_DATA(0xAB),
++ LCD_WRITE_DATA(0x89),
++ LCD_WRITE_DATA(0x76),
++ LCD_WRITE_DATA(0x54),
++ LCD_WRITE_DATA(0x02),
++ LCD_WRITE_DATA(0xFF),
++ LCD_WRITE_DATA(0xFF),
++ LCD_WRITE_DATA(0xFF),
++ LCD_WRITE_DATA(0xFF),
++ LCD_WRITE_DATA(0xFF),
++ LCD_WRITE_DATA(0xFF),
++ LCD_WRITE_DATA(0x20),
++ LCD_WRITE_DATA(0x45),
++ LCD_WRITE_DATA(0x67),
++ LCD_WRITE_DATA(0x98),
++ LCD_WRITE_DATA(0xBA),
++
++ LCD_WRITE_COMMAND(0xFF),
++ LCD_WRITE_DATA(0x77),
++ LCD_WRITE_DATA(0x01),
++ LCD_WRITE_DATA(0x00),
++ LCD_WRITE_DATA(0x00),
++ LCD_WRITE_DATA(0x00),
++
++ LCD_WRITE_COMMAND(MIPI_DCS_SET_PIXEL_FORMAT),
++ LCD_WRITE_DATA(0x66),
++
++ LCD_WRITE_COMMAND(MIPI_DCS_SET_ADDRESS_MODE),
++ LCD_WRITE_DATA(0x00),
++
++ LCD_WRITE_COMMAND(MIPI_DCS_ENTER_INVERT_MODE),
++
++ LCD_WRITE_COMMAND(MIPI_DCS_EXIT_SLEEP_MODE),
++};
++
++static const u16 st7701s_enable_sequence[] = {
++ LCD_WRITE_COMMAND(MIPI_DCS_SET_DISPLAY_ON),
++};
++
++static const u16 st7701s_disable_sequence[] = {
++ LCD_WRITE_COMMAND(MIPI_DCS_SET_DISPLAY_OFF),
++};
++
++static inline struct st7701s *panel_to_st7701s(struct drm_panel *panel)
++{
++ return container_of(panel, struct st7701s, panel);
++}
++
++static int st7701s_spi_write(struct st7701s *ctx, const u16 *data, size_t size)
++{
++ struct spi_transfer xfer = { };
++ struct spi_message msg;
++
++ spi_message_init(&msg);
++
++ xfer.tx_buf = data;
++ xfer.bits_per_word = 9;
++ xfer.len = size;
++
++ spi_message_add_tail(&xfer, &msg);
++ return spi_sync(ctx->spi, &msg);
++}
++
++static const struct drm_display_mode default_mode = {
++ .clock = 19800,
++ .hdisplay = 480,
++ .hsync_start = 480 + 60,
++ .hsync_end = 480 + 60 + 12,
++ .htotal = 480 + 60 + 12 + 60,
++ .vdisplay = 480,
++ .vsync_start = 480 + 18,
++ .vsync_end = 480 + 18 + 4,
++ .vtotal = 480 + 18 + 4 + 18,
++};
++
++static int st7701s_get_modes(struct drm_panel *panel,
++ struct drm_connector *connector)
++{
++ struct drm_display_mode *mode;
++
++ mode = drm_mode_duplicate(connector->dev, &default_mode);
++ if (!mode)
++ return -ENOMEM;
++
++ drm_mode_set_name(mode);
++
++ mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
++ drm_mode_probed_add(connector, mode);
++
++ connector->display_info.width_mm = 70;
++ connector->display_info.height_mm = 72;
++
++ return 1;
++}
++
++static int st7701s_prepare(struct drm_panel *panel)
++{
++ struct st7701s *ctx = panel_to_st7701s(panel);
++
++ gpiod_set_value_cansleep(ctx->reset, 1);
++ msleep(20);
++
++ gpiod_set_value_cansleep(ctx->reset, 0);
++ msleep(20);
++
++ st7701s_spi_write(ctx, st7701s_init_sequence_1,
++ sizeof(st7701s_init_sequence_1));
++ msleep(20);
++
++ st7701s_spi_write(ctx, st7701s_init_sequence_2,
++ sizeof(st7701s_init_sequence_2));
++ msleep(120);
++
++ return 0;
++}
++
++static int st7701s_enable(struct drm_panel *panel)
++{
++ struct st7701s *ctx = panel_to_st7701s(panel);
++
++ st7701s_spi_write(ctx, st7701s_enable_sequence,
++ sizeof(st7701s_enable_sequence));
++ msleep(20);
++
++ return 0;
++}
++
++static int st7701s_disable(struct drm_panel *panel)
++{
++ struct st7701s *ctx = panel_to_st7701s(panel);
++
++ st7701s_spi_write(ctx, st7701s_disable_sequence,
++ sizeof(st7701s_disable_sequence));
++
++ return 0;
++}
++
++static int st7701s_unprepare(struct drm_panel *panel)
++{
++ return 0;
++}
++
++static const struct drm_panel_funcs st7701s_drm_funcs = {
++ .disable = st7701s_disable,
++ .enable = st7701s_enable,
++ .get_modes = st7701s_get_modes,
++ .prepare = st7701s_prepare,
++ .unprepare = st7701s_unprepare,
++};
++
++static int st7701s_probe(struct spi_device *spi)
++{
++ struct device *dev = &spi->dev;
++ struct st7701s *ctx;
++ int ret;
++
++ ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
++ if (!ctx)
++ return -ENOMEM;
++
++ spi_set_drvdata(spi, ctx);
++ ctx->spi = spi;
++
++ ctx->reset = devm_gpiod_get(&spi->dev, "reset", GPIOD_OUT_LOW);
++ if (IS_ERR(ctx->reset)) {
++ dev_err(&spi->dev, "Couldn't get our reset line\n");
++ return PTR_ERR(ctx->reset);
++ }
++
++ drm_panel_init(&ctx->panel, dev, &st7701s_drm_funcs,
++ DRM_MODE_CONNECTOR_DPI);
++
++ ret = drm_panel_of_backlight(&ctx->panel);
++ if (ret)
++ return ret;
++
++ drm_panel_add(&ctx->panel);
++
++ return 0;
++}
++
++static void st7701s_remove(struct spi_device *spi)
++{
++ struct st7701s *ctx = spi_get_drvdata(spi);
++
++ drm_panel_remove(&ctx->panel);
++}
++
++static const struct of_device_id st7701s_of_match[] = {
++ { .compatible = "sitronix,st7701s" },
++ { }
++};
++MODULE_DEVICE_TABLE(of, st7701s_of_match);
++
++static const struct spi_device_id st7701s_ids[] = {
++ { "st7701s" },
++ { }
++};
++MODULE_DEVICE_TABLE(spi, st7701s_ids);
++
++static struct spi_driver st7701s_driver = {
++ .probe = st7701s_probe,
++ .remove = st7701s_remove,
++ .driver = {
++ .name = "st7701s",
++ .of_match_table = st7701s_of_match,
++ },
++};
++module_spi_driver(st7701s_driver);
++
++MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
++MODULE_DESCRIPTION("Sitronix ST7701s LCD Driver");
++MODULE_LICENSE("GPL v2");
--- /dev/null
+From db71abf941d25b92b2117780d3771197417d1c81 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sun, 31 Jul 2022 20:34:20 -0500
+Subject: [PATCH 018/117] nvmem: sunxi_sid: Drop the workaround on A64
+
+Now that the SRAM readout code is fixed by using 32-bit accesses, it
+always returns the same values as register readout, so the A64 variant
+no longer needs the workaround. This makes the D1 variant structure
+redundant, so remove it.
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ drivers/nvmem/sunxi_sid.c | 8 +-------
+ 1 file changed, 1 insertion(+), 7 deletions(-)
+
+--- a/drivers/nvmem/sunxi_sid.c
++++ b/drivers/nvmem/sunxi_sid.c
+@@ -196,15 +196,9 @@ static const struct sunxi_sid_cfg sun8i_
+ .need_register_readout = true,
+ };
+
+-static const struct sunxi_sid_cfg sun20i_d1_cfg = {
+- .value_offset = 0x200,
+- .size = 0x100,
+-};
+-
+ static const struct sunxi_sid_cfg sun50i_a64_cfg = {
+ .value_offset = 0x200,
+ .size = 0x100,
+- .need_register_readout = true,
+ };
+
+ static const struct sunxi_sid_cfg sun50i_h6_cfg = {
+@@ -217,7 +211,7 @@ static const struct of_device_id sunxi_s
+ { .compatible = "allwinner,sun7i-a20-sid", .data = &sun7i_a20_cfg },
+ { .compatible = "allwinner,sun8i-a83t-sid", .data = &sun50i_a64_cfg },
+ { .compatible = "allwinner,sun8i-h3-sid", .data = &sun8i_h3_cfg },
+- { .compatible = "allwinner,sun20i-d1-sid", .data = &sun20i_d1_cfg },
++ { .compatible = "allwinner,sun20i-d1-sid", .data = &sun50i_a64_cfg },
+ { .compatible = "allwinner,sun50i-a64-sid", .data = &sun50i_a64_cfg },
+ { .compatible = "allwinner,sun50i-h5-sid", .data = &sun50i_a64_cfg },
+ { .compatible = "allwinner,sun50i-h6-sid", .data = &sun50i_h6_cfg },
--- /dev/null
+From d03341ef7acb64803ade6b173d24f49ffa6149a3 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Tue, 2 Aug 2022 00:29:32 -0500
+Subject: [PATCH 019/117] dt-bindings: nvmem: Allow bit offsets greater than a
+ byte
+
+Some NVMEM devices contain cells which do not start at a multiple of the
+device's stride. However, the "reg" property of a cell must be aligned
+to its provider device's stride.
+
+These cells can be represented in the DT using the "bits" property if
+that property allows offsets up to the full stride. 63 is chosen
+assuming that NVMEM devices will not have strides larger than 8 bytes.
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ Documentation/devicetree/bindings/nvmem/nvmem.yaml | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/Documentation/devicetree/bindings/nvmem/nvmem.yaml
++++ b/Documentation/devicetree/bindings/nvmem/nvmem.yaml
+@@ -53,7 +53,7 @@ patternProperties:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ - minimum: 0
+- maximum: 7
++ maximum: 63
+ description:
+ Offset in bit within the address range specified by reg.
+ - minimum: 1
--- /dev/null
+From f666d95c1443854555044d3d4b52c463cf845ccc Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sun, 17 Jul 2022 20:33:40 -0500
+Subject: [PATCH 020/117] regulator: dt-bindings: Add Allwinner D1 LDOs
+
+The Allwinner D1 SoC contains two pairs of in-package LDOs. One pair is
+for general purpose use. LDOA generally powers the board's 1.8 V rail.
+LDOB generally powers the in-package DRAM, where applicable.
+
+The other pair of LDOs powers the analog power domains inside the SoC,
+including the audio codec, thermal sensor, and ADCs. These LDOs require
+a 0.9 V bandgap voltage reference. The calibration value for the voltage
+reference is stored in an eFuse, accessed via an NVMEM cell.
+
+Neither LDO control register is in its own MMIO range; instead, each
+regulator device relies on a regmap/syscon exported by its parent.
+
+Series-changes: 2
+ - Remove syscon property from bindings
+ - Update binding examples to fix warnings and provide context
+
+Series-changes: 3
+ - Add "reg" property to bindings
+ - Add "unevaluatedProperties: true" to regulator nodes
+ - Minor changes to regulator node name patterns
+ - Remove system-ldos example (now added in patch 3)
+
+Series-changes: 4
+ - Fix the order of the maintainer/description sections
+ - Replace unevaluatedProperties with "additionalProperties: false"
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ .../allwinner,sun20i-d1-analog-ldos.yaml | 74 +++++++++++++++++++
+ .../allwinner,sun20i-d1-system-ldos.yaml | 37 ++++++++++
+ 2 files changed, 111 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/regulator/allwinner,sun20i-d1-analog-ldos.yaml
+ create mode 100644 Documentation/devicetree/bindings/regulator/allwinner,sun20i-d1-system-ldos.yaml
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/regulator/allwinner,sun20i-d1-analog-ldos.yaml
+@@ -0,0 +1,74 @@
++# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
++%YAML 1.2
++---
++$id: http://devicetree.org/schemas/regulator/allwinner,sun20i-d1-analog-ldos.yaml#
++$schema: http://devicetree.org/meta-schemas/core.yaml#
++
++title: Allwinner D1 Analog LDOs
++
++maintainers:
++ - Samuel Holland <samuel@sholland.org>
++
++description:
++ Allwinner D1 contains a set of LDOs which are designed to supply analog power
++ inside and outside the SoC. They are controlled by a register within the audio
++ codec MMIO space, but which is not part of the audio codec clock/reset domain.
++
++properties:
++ compatible:
++ enum:
++ - allwinner,sun20i-d1-analog-ldos
++
++ reg:
++ maxItems: 1
++
++ nvmem-cells:
++ items:
++ - description: NVMEM cell for the calibrated bandgap reference trim value
++
++ nvmem-cell-names:
++ items:
++ - const: bg_trim
++
++patternProperties:
++ "^(a|hp)ldo$":
++ type: object
++ $ref: regulator.yaml#
++ unevaluatedProperties: false
++
++required:
++ - compatible
++ - reg
++ - nvmem-cells
++ - nvmem-cell-names
++
++additionalProperties: false
++
++examples:
++ - |
++ audio-codec@2030000 {
++ compatible = "simple-mfd", "syscon";
++ reg = <0x2030000 0x1000>;
++ ranges;
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ regulators@2030348 {
++ compatible = "allwinner,sun20i-d1-analog-ldos";
++ reg = <0x2030348 0x4>;
++ nvmem-cells = <&bg_trim>;
++ nvmem-cell-names = "bg_trim";
++
++ reg_aldo: aldo {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ };
++
++ reg_hpldo: hpldo {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ };
++ };
++ };
++
++...
+--- /dev/null
++++ b/Documentation/devicetree/bindings/regulator/allwinner,sun20i-d1-system-ldos.yaml
+@@ -0,0 +1,37 @@
++# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
++%YAML 1.2
++---
++$id: http://devicetree.org/schemas/regulator/allwinner,sun20i-d1-system-ldos.yaml#
++$schema: http://devicetree.org/meta-schemas/core.yaml#
++
++title: Allwinner D1 System LDOs
++
++maintainers:
++ - Samuel Holland <samuel@sholland.org>
++
++description:
++ Allwinner D1 contains a pair of general-purpose LDOs which are designed to
++ supply power inside and outside the SoC. They are controlled by a register
++ within the system control MMIO space.
++
++properties:
++ compatible:
++ enum:
++ - allwinner,sun20i-d1-system-ldos
++
++ reg:
++ maxItems: 1
++
++patternProperties:
++ "^ldo[ab]$":
++ type: object
++ $ref: regulator.yaml#
++ unevaluatedProperties: false
++
++required:
++ - compatible
++ - reg
++
++additionalProperties: false
++
++...
--- /dev/null
+From ad842bfb2eb10a75050dd69145ca59de982eb0e9 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sun, 17 Jul 2022 11:46:52 -0500
+Subject: [PATCH 021/117] regulator: sun20i: Add support for Allwinner D1 LDOs
+
+D1 contains two pairs of LDOs. Since they have similar bindings, and
+they always exist together, put them in a single driver.
+
+The analog LDOs are relatively boring, with a single linear range. Their
+one quirk is that a bandgap reference must be calibrated for them to
+produce the correct voltage.
+
+The system LDOs have the complication that their voltage step is not an
+integer, so a custom .list_voltage is needed to get the rounding right.
+
+Series-changes: 2
+ - Use decimal numbers for .n_voltages instead of field widths
+ - Get the regmap from the parent device instead of a property/phandle
+
+Series-changes: 3
+ - Adjust control flow in sun20i_regulator_get_regmap() for clarity
+
+Reviewed-by: Heiko Stuebner <heiko@sntech.de>
+Tested-by: Heiko Stuebner <heiko@sntech.de>
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ drivers/regulator/Kconfig | 8 +
+ drivers/regulator/Makefile | 1 +
+ drivers/regulator/sun20i-regulator.c | 232 +++++++++++++++++++++++++++
+ 3 files changed, 241 insertions(+)
+ create mode 100644 drivers/regulator/sun20i-regulator.c
+
+--- a/drivers/regulator/Kconfig
++++ b/drivers/regulator/Kconfig
+@@ -1280,6 +1280,14 @@ config REGULATOR_STW481X_VMMC
+ This driver supports the internal VMMC regulator in the STw481x
+ PMIC chips.
+
++config REGULATOR_SUN20I
++ tristate "Allwinner D1 internal LDOs"
++ depends on ARCH_SUNXI || COMPILE_TEST
++ depends on MFD_SYSCON && NVMEM
++ default ARCH_SUNXI
++ help
++ This driver supports the internal LDOs in the Allwinner D1 SoC.
++
+ config REGULATOR_SY7636A
+ tristate "Silergy SY7636A voltage regulator"
+ depends on MFD_SY7636A
+--- a/drivers/regulator/Makefile
++++ b/drivers/regulator/Makefile
+@@ -150,6 +150,7 @@ obj-$(CONFIG_REGULATOR_STM32_VREFBUF) +=
+ obj-$(CONFIG_REGULATOR_STM32_PWR) += stm32-pwr.o
+ obj-$(CONFIG_REGULATOR_STPMIC1) += stpmic1_regulator.o
+ obj-$(CONFIG_REGULATOR_STW481X_VMMC) += stw481x-vmmc.o
++obj-$(CONFIG_REGULATOR_SUN20I) += sun20i-regulator.o
+ obj-$(CONFIG_REGULATOR_SY7636A) += sy7636a-regulator.o
+ obj-$(CONFIG_REGULATOR_SY8106A) += sy8106a-regulator.o
+ obj-$(CONFIG_REGULATOR_SY8824X) += sy8824x.o
+--- /dev/null
++++ b/drivers/regulator/sun20i-regulator.c
+@@ -0,0 +1,232 @@
++// SPDX-License-Identifier: GPL-2.0-only
++//
++// Copyright (c) 2021-2022 Samuel Holland <samuel@sholland.org>
++//
++
++#include <linux/mfd/syscon.h>
++#include <linux/module.h>
++#include <linux/nvmem-consumer.h>
++#include <linux/of_device.h>
++#include <linux/platform_device.h>
++#include <linux/regmap.h>
++#include <linux/regulator/driver.h>
++
++#define SUN20I_POWER_REG 0x348
++
++#define SUN20I_SYS_LDO_CTRL_REG 0x150
++
++struct sun20i_regulator_data {
++ int (*init)(struct device *dev,
++ struct regmap *regmap);
++ const struct regulator_desc *descs;
++ unsigned int ndescs;
++};
++
++static int sun20i_d1_analog_ldos_init(struct device *dev, struct regmap *regmap)
++{
++ u8 bg_trim;
++ int ret;
++
++ ret = nvmem_cell_read_u8(dev, "bg_trim", &bg_trim);
++ if (ret)
++ return dev_err_probe(dev, ret, "Failed to get bg_trim value\n");
++
++ /* The default value corresponds to 900 mV. */
++ if (!bg_trim)
++ bg_trim = 0x19;
++
++ return regmap_update_bits(regmap, SUN20I_POWER_REG,
++ GENMASK(7, 0), bg_trim);
++}
++
++static const struct regulator_ops sun20i_d1_analog_ldo_ops = {
++ .list_voltage = regulator_list_voltage_linear,
++ .map_voltage = regulator_map_voltage_linear,
++ .set_voltage_sel = regulator_set_voltage_sel_regmap,
++ .get_voltage_sel = regulator_get_voltage_sel_regmap,
++ .enable = regulator_enable_regmap,
++ .disable = regulator_disable_regmap,
++ .is_enabled = regulator_is_enabled_regmap,
++};
++
++static const struct regulator_desc sun20i_d1_analog_ldo_descs[] = {
++ {
++ .name = "aldo",
++ .supply_name = "vdd33",
++ .of_match = "aldo",
++ .ops = &sun20i_d1_analog_ldo_ops,
++ .type = REGULATOR_VOLTAGE,
++ .owner = THIS_MODULE,
++ .n_voltages = 8,
++ .min_uV = 1650000,
++ .uV_step = 50000,
++ .vsel_reg = SUN20I_POWER_REG,
++ .vsel_mask = GENMASK(14, 12),
++ .enable_reg = SUN20I_POWER_REG,
++ .enable_mask = BIT(31),
++ },
++ {
++ .name = "hpldo",
++ .supply_name = "hpldoin",
++ .of_match = "hpldo",
++ .ops = &sun20i_d1_analog_ldo_ops,
++ .type = REGULATOR_VOLTAGE,
++ .owner = THIS_MODULE,
++ .n_voltages = 8,
++ .min_uV = 1650000,
++ .uV_step = 50000,
++ .vsel_reg = SUN20I_POWER_REG,
++ .vsel_mask = GENMASK(10, 8),
++ .enable_reg = SUN20I_POWER_REG,
++ .enable_mask = BIT(30),
++ },
++};
++
++static const struct sun20i_regulator_data sun20i_d1_analog_ldos = {
++ .init = sun20i_d1_analog_ldos_init,
++ .descs = sun20i_d1_analog_ldo_descs,
++ .ndescs = ARRAY_SIZE(sun20i_d1_analog_ldo_descs),
++};
++
++/* regulator_list_voltage_linear() modified for the non-integral uV_step. */
++static int sun20i_d1_system_ldo_list_voltage(struct regulator_dev *rdev,
++ unsigned int selector)
++{
++ const struct regulator_desc *desc = rdev->desc;
++ unsigned int uV;
++
++ if (selector >= desc->n_voltages)
++ return -EINVAL;
++
++ uV = desc->min_uV + (desc->uV_step * selector);
++
++ /* Produce correctly-rounded absolute voltages. */
++ return uV + ((selector + 1 + (desc->min_uV % 4)) / 3);
++}
++
++static const struct regulator_ops sun20i_d1_system_ldo_ops = {
++ .list_voltage = sun20i_d1_system_ldo_list_voltage,
++ .map_voltage = regulator_map_voltage_ascend,
++ .set_voltage_sel = regulator_set_voltage_sel_regmap,
++ .get_voltage_sel = regulator_get_voltage_sel_regmap,
++};
++
++static const struct regulator_desc sun20i_d1_system_ldo_descs[] = {
++ {
++ .name = "ldoa",
++ .supply_name = "ldo-in",
++ .of_match = "ldoa",
++ .ops = &sun20i_d1_system_ldo_ops,
++ .type = REGULATOR_VOLTAGE,
++ .owner = THIS_MODULE,
++ .n_voltages = 32,
++ .min_uV = 1600000,
++ .uV_step = 13333, /* repeating */
++ .vsel_reg = SUN20I_SYS_LDO_CTRL_REG,
++ .vsel_mask = GENMASK(7, 0),
++ },
++ {
++ .name = "ldob",
++ .supply_name = "ldo-in",
++ .of_match = "ldob",
++ .ops = &sun20i_d1_system_ldo_ops,
++ .type = REGULATOR_VOLTAGE,
++ .owner = THIS_MODULE,
++ .n_voltages = 64,
++ .min_uV = 1166666,
++ .uV_step = 13333, /* repeating */
++ .vsel_reg = SUN20I_SYS_LDO_CTRL_REG,
++ .vsel_mask = GENMASK(15, 8),
++ },
++};
++
++static const struct sun20i_regulator_data sun20i_d1_system_ldos = {
++ .descs = sun20i_d1_system_ldo_descs,
++ .ndescs = ARRAY_SIZE(sun20i_d1_system_ldo_descs),
++};
++
++static const struct of_device_id sun20i_regulator_of_match[] = {
++ {
++ .compatible = "allwinner,sun20i-d1-analog-ldos",
++ .data = &sun20i_d1_analog_ldos,
++ },
++ {
++ .compatible = "allwinner,sun20i-d1-system-ldos",
++ .data = &sun20i_d1_system_ldos,
++ },
++ { },
++};
++MODULE_DEVICE_TABLE(of, sun20i_regulator_of_match);
++
++static struct regmap *sun20i_regulator_get_regmap(struct device *dev)
++{
++ struct regmap *regmap;
++
++ /*
++ * First try the syscon interface. The system control device is not
++ * compatible with "syscon", so fall back to getting the regmap from
++ * its platform device. This is ugly, but required for devicetree
++ * backward compatibility.
++ */
++ regmap = syscon_node_to_regmap(dev->parent->of_node);
++ if (!IS_ERR(regmap))
++ return regmap;
++
++ regmap = dev_get_regmap(dev->parent, NULL);
++ if (regmap)
++ return regmap;
++
++ return ERR_PTR(-EPROBE_DEFER);
++}
++
++static int sun20i_regulator_probe(struct platform_device *pdev)
++{
++ const struct sun20i_regulator_data *data;
++ struct device *dev = &pdev->dev;
++ struct regulator_config config;
++ struct regmap *regmap;
++ int ret;
++
++ data = of_device_get_match_data(dev);
++ if (!data)
++ return -EINVAL;
++
++ regmap = sun20i_regulator_get_regmap(dev);
++ if (IS_ERR(regmap))
++ return dev_err_probe(dev, PTR_ERR(regmap), "Failed to get regmap\n");
++
++ if (data->init) {
++ ret = data->init(dev, regmap);
++ if (ret)
++ return ret;
++ }
++
++ config = (struct regulator_config) {
++ .dev = dev,
++ .regmap = regmap,
++ };
++
++ for (unsigned int i = 0; i < data->ndescs; ++i) {
++ const struct regulator_desc *desc = &data->descs[i];
++ struct regulator_dev *rdev;
++
++ rdev = devm_regulator_register(dev, desc, &config);
++ if (IS_ERR(rdev))
++ return PTR_ERR(rdev);
++ }
++
++ return 0;
++}
++
++static struct platform_driver sun20i_regulator_driver = {
++ .probe = sun20i_regulator_probe,
++ .driver = {
++ .name = "sun20i-regulator",
++ .of_match_table = sun20i_regulator_of_match,
++ },
++};
++module_platform_driver(sun20i_regulator_driver);
++
++MODULE_AUTHOR("Samuel Holland <samuel@sholland.org>");
++MODULE_DESCRIPTION("Allwinner D1 internal LDO driver");
++MODULE_LICENSE("GPL");
--- /dev/null
+From 52c6979628d596018e9259767bff4def25e449dc Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Mon, 1 Aug 2022 23:57:19 -0500
+Subject: [PATCH 022/117] dt-bindings: sram: sunxi-sram: Add optional
+ regulators child
+
+Some sunxi SoCs have in-package regulators controlled by a register in
+the system control MMIO block. Allow a child node for these regulators
+in addition to SRAM child nodes.
+
+Commit-changes: 2
+ - New patch for v2
+
+Series-changes: 3
+ - Require the regulators node to have a unit address
+ - Reference the regulator schema from the SRAM controller schema
+ - Move the system LDOs example to the SRAM controller schema
+ - Reorder the patches so the example passes validation
+
+Series-changes: 4
+ - Remove unevaluatedProperties from regulators schema reference
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ .../allwinner,sun4i-a10-system-control.yaml | 28 +++++++++++++++++++
+ 1 file changed, 28 insertions(+)
+
+--- a/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml
++++ b/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml
+@@ -56,6 +56,9 @@ properties:
+ ranges: true
+
+ patternProperties:
++ "^regulators@[0-9a-f]+$":
++ $ref: /schemas/regulator/allwinner,sun20i-d1-system-ldos.yaml#
++
+ "^sram@[a-z0-9]+":
+ type: object
+
+@@ -130,3 +133,28 @@ examples:
+ };
+ };
+ };
++
++ - |
++ syscon@3000000 {
++ compatible = "allwinner,sun20i-d1-system-control";
++ reg = <0x3000000 0x1000>;
++ ranges;
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ regulators@3000150 {
++ compatible = "allwinner,sun20i-d1-system-ldos";
++ reg = <0x3000150 0x4>;
++
++ reg_ldoa: ldoa {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ };
++
++ reg_ldob: ldob {
++ regulator-name = "vcc-dram";
++ regulator-min-microvolt = <1500000>;
++ regulator-max-microvolt = <1500000>;
++ };
++ };
++ };
--- /dev/null
+From 1946ff7ee38c994ae3eb9968c5b51695c0df2cf7 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Tue, 2 Aug 2022 00:01:21 -0500
+Subject: [PATCH 023/117] soc: sunxi: sram: Only iterate over SRAM children
+
+Now that a "regulators" child is accepted by the controller binding, the
+debugfs show routine must be explicitly limited to "sram" children.
+
+Series-to: Liam Girdwood <lgirdwood@gmail.com>
+Series-to: Mark Brown <broonie@kernel.org>
+Series-to: Chen-Yu Tsai <wens@csie.org>
+Series-to: Jernej Skrabec <jernej.skrabec@gmail.com>
+Series-to: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
+Series-to: Rob Herring <robh+dt@kernel.org>
+
+Commit-changes: 2
+ - New patch for v2
+
+Series-version: 4
+
+Cover-letter:
+regulator: Add support for Allwinner D1 LDOs
+This series adds bindings and a driver for the two pairs of LDOs
+inside the Allwinner D1 SoC.
+
+A binding and driver change is required for the SRAM controller, to
+accept the regulators device as its child node. The new example in the
+SRAM controller binding uses the compatible string added in this series:
+https://lore.kernel.org/lkml/20220815041248.53268-1-samuel@sholland.org/
+END
+
+Reviewed-by: Heiko Stuebner <heiko@sntech.de>
+Tested-by: Heiko Stuebner <heiko@sntech.de>
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ drivers/soc/sunxi/sunxi_sram.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/drivers/soc/sunxi/sunxi_sram.c
++++ b/drivers/soc/sunxi/sunxi_sram.c
+@@ -120,6 +120,9 @@ static int sunxi_sram_show(struct seq_fi
+ seq_puts(s, "--------------------\n\n");
+
+ for_each_child_of_node(sram_dev->of_node, sram_node) {
++ if (!of_node_name_eq(sram_node, "sram"))
++ continue;
++
+ sram_addr_p = of_get_address(sram_node, 0, NULL, NULL);
+
+ seq_printf(s, "sram@%08x\n",
--- /dev/null
+From 25727569379b42593b55cfb743b7eff4cfa1cce2 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sun, 14 Aug 2022 23:45:50 -0500
+Subject: [PATCH 024/117] MAINTAINERS: Match the sun20i family of Allwinner
+ SoCs
+
+Allwinner sunxi SoCs with a RISC-V CPU use the sun20i designator. Match
+that pattern in addition to the designators for 32 and 64-bit ARM SoCs.
+
+Reviewed-by: Heiko Stuebner <heiko@sntech.de>
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ MAINTAINERS | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/MAINTAINERS
++++ b/MAINTAINERS
+@@ -1828,7 +1828,7 @@ F: drivers/pinctrl/sunxi/
+ F: drivers/soc/sunxi/
+ N: allwinner
+ N: sun[x456789]i
+-N: sun50i
++N: sun[25]0i
+
+ ARM/Amlogic Meson SoC CLOCK FRAMEWORK
+ M: Neil Armstrong <neil.armstrong@linaro.org>
--- /dev/null
+From 4ae663dbc373f5690581cee16d3667693eb9d73e Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sun, 16 May 2021 14:05:17 -0500
+Subject: [PATCH 025/117] dt-bindings: riscv: Add T-HEAD C906 and C910
+ compatibles
+
+The C906 and C910 are RISC-V CPU cores from T-HEAD Semiconductor.
+Notably, the C906 core is used in the Allwinner D1 SoC.
+
+Acked-by: Rob Herring <robh@kernel.org>
+Reviewed-by: Heiko Stuebner <heiko@sntech.de>
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ Documentation/devicetree/bindings/riscv/cpus.yaml | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/Documentation/devicetree/bindings/riscv/cpus.yaml
++++ b/Documentation/devicetree/bindings/riscv/cpus.yaml
+@@ -39,6 +39,8 @@ properties:
+ - sifive,u5
+ - sifive,u7
+ - canaan,k210
++ - thead,c906
++ - thead,c910
+ - const: riscv
+ - items:
+ - enum:
--- /dev/null
+From d0c24deb787a95515d355eea68e0402bfec77f75 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sun, 17 Jul 2022 14:42:05 -0500
+Subject: [PATCH 026/117] dt-bindings: vendor-prefixes: Add Allwinner D1 board
+ vendors
+
+Some boards using the Allwinner D1 SoC are made by vendors not
+previously documented.
+
+Clockwork Tech LLC (https://www.clockworkpi.com/) manufactures the
+ClockworkPi and DevTerm boards.
+
+Beijing Widora Technology Co., Ltd. (https://mangopi.cc/) manufactures
+the MangoPi family of boards.
+
+Acked-by: Rob Herring <robh@kernel.org>
+Reviewed-by: Heiko Stuebner <heiko@sntech.de>
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ Documentation/devicetree/bindings/vendor-prefixes.yaml | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
++++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
+@@ -260,6 +260,8 @@ patternProperties:
+ description: Cirrus Logic, Inc.
+ "^cisco,.*":
+ description: Cisco Systems, Inc.
++ "^clockwork,.*":
++ description: Clockwork Tech LLC
+ "^cloudengines,.*":
+ description: Cloud Engines, Inc.
+ "^cnm,.*":
+@@ -1424,6 +1426,8 @@ patternProperties:
+ description: Shenzhen whwave Electronics, Inc.
+ "^wi2wi,.*":
+ description: Wi2Wi, Inc.
++ "^widora,.*":
++ description: Beijing Widora Technology Co., Ltd.
+ "^wiligear,.*":
+ description: Wiligear, Ltd.
+ "^willsemi,.*":
--- /dev/null
+From 4d7c04f210dd401f3560a7f53c78d6e058d182e2 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Wed, 29 Jun 2022 00:26:39 -0500
+Subject: [PATCH 027/117] dt-bindings: riscv: Add Allwinner D1 board
+ compatibles
+
+Several SoMs and boards are available that feature the Allwinner D1 SoC.
+Document their compatible strings.
+
+Acked-by: Rob Herring <robh@kernel.org>
+Reviewed-by: Heiko Stuebner <heiko@sntech.de>
+Tested-by: Heiko Stuebner <heiko@sntech.de>
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ .../devicetree/bindings/riscv/sunxi.yaml | 64 +++++++++++++++++++
+ 1 file changed, 64 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/riscv/sunxi.yaml
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/riscv/sunxi.yaml
+@@ -0,0 +1,64 @@
++# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
++%YAML 1.2
++---
++$id: http://devicetree.org/schemas/riscv/sunxi.yaml#
++$schema: http://devicetree.org/meta-schemas/core.yaml#
++
++title: Allwinner RISC-V SoC-based boards
++
++maintainers:
++ - Chen-Yu Tsai <wens@csie.org>
++ - Jernej Skrabec <jernej.skrabec@gmail.com>
++ - Samuel Holland <samuel@sholland.org>
++
++description:
++ Allwinner RISC-V SoC-based boards
++
++properties:
++ $nodename:
++ const: '/'
++ compatible:
++ oneOf:
++ - description: Dongshan Nezha STU SoM
++ items:
++ - const: 100ask,dongshan-nezha-stu
++ - const: allwinner,sun20i-d1
++
++ - description: D1 Nezha board
++ items:
++ - const: allwinner,d1-nezha
++ - const: allwinner,sun20i-d1
++
++ - description: ClockworkPi R-01 SoM and v3.14 board
++ items:
++ - const: clockwork,r-01-clockworkpi-v3.14
++ - const: allwinner,sun20i-d1
++
++ - description: ClockworkPi R-01 SoM, v3.14 board, and DevTerm expansion
++ items:
++ - const: clockwork,r-01-devterm-v3.14
++ - const: clockwork,r-01-clockworkpi-v3.14
++ - const: allwinner,sun20i-d1
++
++ - description: Lichee RV SoM
++ items:
++ - const: sipeed,lichee-rv
++ - const: allwinner,sun20i-d1
++
++ - description: Carrier boards for the Lichee RV SoM
++ items:
++ - enum:
++ - sipeed,lichee-rv-86-panel-480p
++ - sipeed,lichee-rv-86-panel-720p
++ - sipeed,lichee-rv-dock
++ - const: sipeed,lichee-rv
++ - const: allwinner,sun20i-d1
++
++ - description: MangoPi MQ Pro board
++ items:
++ - const: widora,mangopi-mq-pro
++ - const: allwinner,sun20i-d1
++
++additionalProperties: true
++
++...
--- /dev/null
+From 20d565fb9324b0d2791d10cb65560eddd2ef526e Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Tue, 28 Jun 2022 23:20:33 -0500
+Subject: [PATCH 028/117] riscv: dts: allwinner: Add the D1 SoC base devicetree
+
+D1 is a SoC containing a single-core T-HEAD Xuantie C906 CPU, as well as
+one HiFi 4 DSP. The SoC is based on a design that additionally contained
+a pair of Cortex A7's. For that reason, some peripherals are duplicated.
+
+This devicetree includes all of the peripherals that already have a
+documented binding.
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ arch/riscv/boot/dts/Makefile | 1 +
+ arch/riscv/boot/dts/allwinner/Makefile | 1 +
+ arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi | 900 +++++++++++++++++++
+ 3 files changed, 902 insertions(+)
+ create mode 100644 arch/riscv/boot/dts/allwinner/Makefile
+ create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
+
+--- a/arch/riscv/boot/dts/Makefile
++++ b/arch/riscv/boot/dts/Makefile
+@@ -1,4 +1,5 @@
+ # SPDX-License-Identifier: GPL-2.0
++subdir-y += allwinner
+ subdir-y += sifive
+ subdir-y += starfive
+ subdir-$(CONFIG_SOC_CANAAN_K210_DTB_BUILTIN) += canaan
+--- /dev/null
++++ b/arch/riscv/boot/dts/allwinner/Makefile
+@@ -0,0 +1 @@
++# SPDX-License-Identifier: GPL-2.0
+--- /dev/null
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
+@@ -0,0 +1,900 @@
++// SPDX-License-Identifier: (GPL-2.0+ or MIT)
++// Copyright (C) 2021-2022 Samuel Holland <samuel@sholland.org>
++
++#include <dt-bindings/clock/sun6i-rtc.h>
++#include <dt-bindings/clock/sun8i-de2.h>
++#include <dt-bindings/clock/sun8i-tcon-top.h>
++#include <dt-bindings/clock/sun20i-d1-ccu.h>
++#include <dt-bindings/clock/sun20i-d1-r-ccu.h>
++#include <dt-bindings/interrupt-controller/irq.h>
++#include <dt-bindings/reset/sun8i-de2.h>
++#include <dt-bindings/reset/sun20i-d1-ccu.h>
++#include <dt-bindings/reset/sun20i-d1-r-ccu.h>
++#include <dt-bindings/thermal/thermal.h>
++
++/ {
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ cpus {
++ timebase-frequency = <24000000>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ cpu0: cpu@0 {
++ compatible = "thead,c906", "riscv";
++ device_type = "cpu";
++ reg = <0>;
++ clocks = <&ccu CLK_RISCV>;
++ clock-frequency = <24000000>;
++ d-cache-block-size = <64>;
++ d-cache-sets = <256>;
++ d-cache-size = <32768>;
++ i-cache-block-size = <64>;
++ i-cache-sets = <128>;
++ i-cache-size = <32768>;
++ mmu-type = "riscv,sv39";
++ riscv,isa = "rv64imafdc";
++ #cooling-cells = <2>;
++
++ cpu0_intc: interrupt-controller {
++ compatible = "riscv,cpu-intc";
++ interrupt-controller;
++ #address-cells = <0>;
++ #interrupt-cells = <1>;
++ };
++ };
++ };
++
++ de: display-engine {
++ compatible = "allwinner,sun20i-d1-display-engine";
++ allwinner,pipelines = <&mixer0>, <&mixer1>;
++ status = "disabled";
++ };
++
++ osc24M: osc24M-clk {
++ compatible = "fixed-clock";
++ clock-frequency = <24000000>;
++ clock-output-names = "osc24M";
++ #clock-cells = <0>;
++ };
++
++ soc {
++ compatible = "simple-bus";
++ ranges;
++ interrupt-parent = <&plic>;
++ dma-noncoherent;
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ dsp_wdt: watchdog@1700400 {
++ compatible = "allwinner,sun20i-d1-wdt";
++ reg = <0x1700400 0x20>;
++ interrupts = <138 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&osc24M>, <&rtc CLK_OSC32K>;
++ clock-names = "hosc", "losc";
++ status = "reserved";
++ };
++
++ pio: pinctrl@2000000 {
++ compatible = "allwinner,sun20i-d1-pinctrl";
++ reg = <0x2000000 0x800>;
++ interrupts = <85 IRQ_TYPE_LEVEL_HIGH>,
++ <87 IRQ_TYPE_LEVEL_HIGH>,
++ <89 IRQ_TYPE_LEVEL_HIGH>,
++ <91 IRQ_TYPE_LEVEL_HIGH>,
++ <93 IRQ_TYPE_LEVEL_HIGH>,
++ <95 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_APB0>,
++ <&osc24M>,
++ <&rtc CLK_OSC32K>;
++ clock-names = "apb", "hosc", "losc";
++ gpio-controller;
++ interrupt-controller;
++ #gpio-cells = <3>;
++ #interrupt-cells = <3>;
++
++ /omit-if-no-ref/
++ i2c0_pb10_pins: i2c0-pb10-pins {
++ pins = "PB10", "PB11";
++ function = "i2c0";
++ };
++
++ /omit-if-no-ref/
++ i2c2_pb0_pins: i2c2-pb0-pins {
++ pins = "PB0", "PB1";
++ function = "i2c2";
++ };
++
++ /omit-if-no-ref/
++ lcd_rgb666_pins: lcd-rgb666-pins {
++ pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5",
++ "PD6", "PD7", "PD8", "PD9", "PD10", "PD11",
++ "PD12", "PD13", "PD14", "PD15", "PD16", "PD17",
++ "PD18", "PD19", "PD20", "PD21";
++ function = "lcd0";
++ };
++
++ /omit-if-no-ref/
++ mmc0_pins: mmc0-pins {
++ pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5";
++ function = "mmc0";
++ };
++
++ /omit-if-no-ref/
++ mmc1_pins: mmc1-pins {
++ pins = "PG0", "PG1", "PG2", "PG3", "PG4", "PG5";
++ function = "mmc1";
++ };
++
++ /omit-if-no-ref/
++ mmc2_pins: mmc2-pins {
++ pins = "PC2", "PC3", "PC4", "PC5", "PC6", "PC7";
++ function = "mmc2";
++ };
++
++ /omit-if-no-ref/
++ rgmii_pe_pins: rgmii-pe-pins {
++ pins = "PE0", "PE1", "PE2", "PE3", "PE4",
++ "PE5", "PE6", "PE7", "PE8", "PE9",
++ "PE11", "PE12", "PE13", "PE14", "PE15";
++ function = "emac";
++ };
++
++ /omit-if-no-ref/
++ rmii_pe_pins: rmii-pe-pins {
++ pins = "PE0", "PE1", "PE2", "PE3", "PE4",
++ "PE5", "PE6", "PE7", "PE8", "PE9";
++ function = "emac";
++ };
++
++ /omit-if-no-ref/
++ uart0_pb8_pins: uart0-pb8-pins {
++ pins = "PB8", "PB9";
++ function = "uart0";
++ };
++
++ /omit-if-no-ref/
++ uart1_pg6_pins: uart1-pg6-pins {
++ pins = "PG6", "PG7";
++ function = "uart1";
++ };
++
++ /omit-if-no-ref/
++ uart1_pg8_rts_cts_pins: uart1-pg8-rts-cts-pins {
++ pins = "PG8", "PG9";
++ function = "uart1";
++ };
++ };
++
++ ccu: clock-controller@2001000 {
++ compatible = "allwinner,sun20i-d1-ccu";
++ reg = <0x2001000 0x1000>;
++ clocks = <&osc24M>,
++ <&rtc CLK_OSC32K>,
++ <&rtc CLK_IOSC>;
++ clock-names = "hosc", "losc", "iosc";
++ #clock-cells = <1>;
++ #reset-cells = <1>;
++ };
++
++ lradc: keys@2009800 {
++ compatible = "allwinner,sun20i-d1-lradc",
++ "allwinner,sun50i-r329-lradc";
++ reg = <0x2009800 0x400>;
++ interrupts = <77 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_LRADC>;
++ resets = <&ccu RST_BUS_LRADC>;
++ status = "disabled";
++ };
++
++ codec: audio-codec@2030000 {
++ compatible = "simple-mfd", "syscon";
++ reg = <0x2030000 0x1000>;
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ regulators@2030348 {
++ compatible = "allwinner,sun20i-d1-analog-ldos";
++ reg = <0x2030348 0x4>;
++ nvmem-cells = <&bg_trim>;
++ nvmem-cell-names = "bg_trim";
++
++ reg_aldo: aldo {
++ };
++
++ reg_hpldo: hpldo {
++ };
++ };
++ };
++
++ i2s0: i2s@2032000 {
++ compatible = "allwinner,sun20i-d1-i2s",
++ "allwinner,sun50i-r329-i2s";
++ reg = <0x2032000 0x1000>;
++ interrupts = <42 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_I2S0>,
++ <&ccu CLK_I2S0>;
++ clock-names = "apb", "mod";
++ resets = <&ccu RST_BUS_I2S0>;
++ dmas = <&dma 3>, <&dma 3>;
++ dma-names = "rx", "tx";
++ status = "disabled";
++ #sound-dai-cells = <0>;
++ };
++
++ i2s1: i2s@2033000 {
++ compatible = "allwinner,sun20i-d1-i2s",
++ "allwinner,sun50i-r329-i2s";
++ reg = <0x2033000 0x1000>;
++ interrupts = <43 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_I2S1>,
++ <&ccu CLK_I2S1>;
++ clock-names = "apb", "mod";
++ resets = <&ccu RST_BUS_I2S1>;
++ dmas = <&dma 4>, <&dma 4>;
++ dma-names = "rx", "tx";
++ status = "disabled";
++ #sound-dai-cells = <0>;
++ };
++
++ i2s2: i2s@2034000 {
++ compatible = "allwinner,sun20i-d1-i2s",
++ "allwinner,sun50i-r329-i2s";
++ reg = <0x2034000 0x1000>;
++ interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_I2S2>,
++ <&ccu CLK_I2S2>;
++ clock-names = "apb", "mod";
++ resets = <&ccu RST_BUS_I2S2>;
++ dmas = <&dma 5>, <&dma 5>;
++ dma-names = "rx", "tx";
++ status = "disabled";
++ #sound-dai-cells = <0>;
++ };
++
++ timer: timer@2050000 {
++ compatible = "allwinner,sun20i-d1-timer",
++ "allwinner,sun8i-a23-timer";
++ reg = <0x2050000 0xa0>;
++ interrupts = <75 IRQ_TYPE_LEVEL_HIGH>,
++ <76 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&osc24M>;
++ };
++
++ wdt: watchdog@20500a0 {
++ compatible = "allwinner,sun20i-d1-wdt-reset",
++ "allwinner,sun20i-d1-wdt";
++ reg = <0x20500a0 0x20>;
++ interrupts = <79 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&osc24M>, <&rtc CLK_OSC32K>;
++ clock-names = "hosc", "losc";
++ status = "reserved";
++ };
++
++ uart0: serial@2500000 {
++ compatible = "snps,dw-apb-uart";
++ reg = <0x2500000 0x400>;
++ reg-io-width = <4>;
++ reg-shift = <2>;
++ interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_UART0>;
++ resets = <&ccu RST_BUS_UART0>;
++ dmas = <&dma 14>, <&dma 14>;
++ dma-names = "rx", "tx";
++ status = "disabled";
++ };
++
++ uart1: serial@2500400 {
++ compatible = "snps,dw-apb-uart";
++ reg = <0x2500400 0x400>;
++ reg-io-width = <4>;
++ reg-shift = <2>;
++ interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_UART1>;
++ resets = <&ccu RST_BUS_UART1>;
++ dmas = <&dma 15>, <&dma 15>;
++ dma-names = "rx", "tx";
++ status = "disabled";
++ };
++
++ uart2: serial@2500800 {
++ compatible = "snps,dw-apb-uart";
++ reg = <0x2500800 0x400>;
++ reg-io-width = <4>;
++ reg-shift = <2>;
++ interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_UART2>;
++ resets = <&ccu RST_BUS_UART2>;
++ dmas = <&dma 16>, <&dma 16>;
++ dma-names = "rx", "tx";
++ status = "disabled";
++ };
++
++ uart3: serial@2500c00 {
++ compatible = "snps,dw-apb-uart";
++ reg = <0x2500c00 0x400>;
++ reg-io-width = <4>;
++ reg-shift = <2>;
++ interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_UART3>;
++ resets = <&ccu RST_BUS_UART3>;
++ dmas = <&dma 17>, <&dma 17>;
++ dma-names = "rx", "tx";
++ status = "disabled";
++ };
++
++ uart4: serial@2501000 {
++ compatible = "snps,dw-apb-uart";
++ reg = <0x2501000 0x400>;
++ reg-io-width = <4>;
++ reg-shift = <2>;
++ interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_UART4>;
++ resets = <&ccu RST_BUS_UART4>;
++ dmas = <&dma 18>, <&dma 18>;
++ dma-names = "rx", "tx";
++ status = "disabled";
++ };
++
++ uart5: serial@2501400 {
++ compatible = "snps,dw-apb-uart";
++ reg = <0x2501400 0x400>;
++ reg-io-width = <4>;
++ reg-shift = <2>;
++ interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_UART5>;
++ resets = <&ccu RST_BUS_UART5>;
++ dmas = <&dma 19>, <&dma 19>;
++ dma-names = "rx", "tx";
++ status = "disabled";
++ };
++
++ i2c0: i2c@2502000 {
++ compatible = "allwinner,sun20i-d1-i2c",
++ "allwinner,sun8i-v536-i2c",
++ "allwinner,sun6i-a31-i2c";
++ reg = <0x2502000 0x400>;
++ interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_I2C0>;
++ resets = <&ccu RST_BUS_I2C0>;
++ dmas = <&dma 43>, <&dma 43>;
++ dma-names = "rx", "tx";
++ status = "disabled";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ };
++
++ i2c1: i2c@2502400 {
++ compatible = "allwinner,sun20i-d1-i2c",
++ "allwinner,sun8i-v536-i2c",
++ "allwinner,sun6i-a31-i2c";
++ reg = <0x2502400 0x400>;
++ interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_I2C1>;
++ resets = <&ccu RST_BUS_I2C1>;
++ dmas = <&dma 44>, <&dma 44>;
++ dma-names = "rx", "tx";
++ status = "disabled";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ };
++
++ i2c2: i2c@2502800 {
++ compatible = "allwinner,sun20i-d1-i2c",
++ "allwinner,sun8i-v536-i2c",
++ "allwinner,sun6i-a31-i2c";
++ reg = <0x2502800 0x400>;
++ interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_I2C2>;
++ resets = <&ccu RST_BUS_I2C2>;
++ dmas = <&dma 45>, <&dma 45>;
++ dma-names = "rx", "tx";
++ status = "disabled";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ };
++
++ i2c3: i2c@2502c00 {
++ compatible = "allwinner,sun20i-d1-i2c",
++ "allwinner,sun8i-v536-i2c",
++ "allwinner,sun6i-a31-i2c";
++ reg = <0x2502c00 0x400>;
++ interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_I2C3>;
++ resets = <&ccu RST_BUS_I2C3>;
++ dmas = <&dma 46>, <&dma 46>;
++ dma-names = "rx", "tx";
++ status = "disabled";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ };
++
++ syscon: syscon@3000000 {
++ compatible = "allwinner,sun20i-d1-system-control";
++ reg = <0x3000000 0x1000>;
++ ranges;
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ regulators@3000150 {
++ compatible = "allwinner,sun20i-d1-system-ldos";
++ reg = <0x3000150 0x4>;
++
++ reg_ldoa: ldoa {
++ };
++
++ reg_ldob: ldob {
++ };
++ };
++ };
++
++ dma: dma-controller@3002000 {
++ compatible = "allwinner,sun20i-d1-dma";
++ reg = <0x3002000 0x1000>;
++ interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>;
++ clock-names = "bus", "mbus";
++ resets = <&ccu RST_BUS_DMA>;
++ dma-channels = <16>;
++ dma-requests = <48>;
++ #dma-cells = <1>;
++ };
++
++ sid: efuse@3006000 {
++ compatible = "allwinner,sun20i-d1-sid";
++ reg = <0x3006000 0x1000>;
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ ths_calib: ths-calib@14 {
++ reg = <0x14 0x4>;
++ };
++
++ bg_trim: bg-trim@28 {
++ reg = <0x28 0x4>;
++ bits = <16 8>;
++ };
++ };
++
++ mbus: dram-controller@3102000 {
++ compatible = "allwinner,sun20i-d1-mbus";
++ reg = <0x3102000 0x1000>,
++ <0x3103000 0x1000>;
++ reg-names = "mbus", "dram";
++ interrupts = <59 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_MBUS>,
++ <&ccu CLK_DRAM>,
++ <&ccu CLK_BUS_DRAM>;
++ clock-names = "mbus", "dram", "bus";
++ dma-ranges = <0 0x40000000 0x80000000>;
++ #address-cells = <1>;
++ #size-cells = <1>;
++ #interconnect-cells = <1>;
++ };
++
++ mmc0: mmc@4020000 {
++ compatible = "allwinner,sun20i-d1-mmc";
++ reg = <0x4020000 0x1000>;
++ interrupts = <56 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
++ clock-names = "ahb", "mmc";
++ resets = <&ccu RST_BUS_MMC0>;
++ reset-names = "ahb";
++ cap-sd-highspeed;
++ max-frequency = <150000000>;
++ no-mmc;
++ status = "disabled";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ };
++
++ mmc1: mmc@4021000 {
++ compatible = "allwinner,sun20i-d1-mmc";
++ reg = <0x4021000 0x1000>;
++ interrupts = <57 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
++ clock-names = "ahb", "mmc";
++ resets = <&ccu RST_BUS_MMC1>;
++ reset-names = "ahb";
++ cap-sd-highspeed;
++ max-frequency = <150000000>;
++ no-mmc;
++ status = "disabled";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ };
++
++ mmc2: mmc@4022000 {
++ compatible = "allwinner,sun20i-d1-emmc",
++ "allwinner,sun50i-a100-emmc";
++ reg = <0x4022000 0x1000>;
++ interrupts = <58 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
++ clock-names = "ahb", "mmc";
++ resets = <&ccu RST_BUS_MMC2>;
++ reset-names = "ahb";
++ cap-mmc-highspeed;
++ max-frequency = <150000000>;
++ mmc-ddr-1_8v;
++ mmc-ddr-3_3v;
++ no-sd;
++ no-sdio;
++ status = "disabled";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ };
++
++ usb_otg: usb@4100000 {
++ compatible = "allwinner,sun20i-d1-musb",
++ "allwinner,sun8i-a33-musb";
++ reg = <0x4100000 0x400>;
++ interrupts = <45 IRQ_TYPE_LEVEL_HIGH>;
++ interrupt-names = "mc";
++ clocks = <&ccu CLK_BUS_OTG>;
++ resets = <&ccu RST_BUS_OTG>;
++ extcon = <&usbphy 0>;
++ phys = <&usbphy 0>;
++ phy-names = "usb";
++ status = "disabled";
++ };
++
++ usbphy: phy@4100400 {
++ compatible = "allwinner,sun20i-d1-usb-phy";
++ reg = <0x4100400 0x100>,
++ <0x4101800 0x100>,
++ <0x4200800 0x100>;
++ reg-names = "phy_ctrl",
++ "pmu0",
++ "pmu1";
++ clocks = <&osc24M>,
++ <&osc24M>;
++ clock-names = "usb0_phy",
++ "usb1_phy";
++ resets = <&ccu RST_USB_PHY0>,
++ <&ccu RST_USB_PHY1>;
++ reset-names = "usb0_reset",
++ "usb1_reset";
++ status = "disabled";
++ #phy-cells = <1>;
++ };
++
++ ehci0: usb@4101000 {
++ compatible = "allwinner,sun20i-d1-ehci",
++ "generic-ehci";
++ reg = <0x4101000 0x100>;
++ interrupts = <46 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_OHCI0>,
++ <&ccu CLK_BUS_EHCI0>,
++ <&ccu CLK_USB_OHCI0>;
++ resets = <&ccu RST_BUS_OHCI0>,
++ <&ccu RST_BUS_EHCI0>;
++ phys = <&usbphy 0>;
++ phy-names = "usb";
++ status = "disabled";
++ };
++
++ ohci0: usb@4101400 {
++ compatible = "allwinner,sun20i-d1-ohci",
++ "generic-ohci";
++ reg = <0x4101400 0x100>;
++ interrupts = <47 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_OHCI0>,
++ <&ccu CLK_USB_OHCI0>;
++ resets = <&ccu RST_BUS_OHCI0>;
++ phys = <&usbphy 0>;
++ phy-names = "usb";
++ status = "disabled";
++ };
++
++ ehci1: usb@4200000 {
++ compatible = "allwinner,sun20i-d1-ehci",
++ "generic-ehci";
++ reg = <0x4200000 0x100>;
++ interrupts = <49 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_OHCI1>,
++ <&ccu CLK_BUS_EHCI1>,
++ <&ccu CLK_USB_OHCI1>;
++ resets = <&ccu RST_BUS_OHCI1>,
++ <&ccu RST_BUS_EHCI1>;
++ phys = <&usbphy 1>;
++ phy-names = "usb";
++ status = "disabled";
++ };
++
++ ohci1: usb@4200400 {
++ compatible = "allwinner,sun20i-d1-ohci",
++ "generic-ohci";
++ reg = <0x4200400 0x100>;
++ interrupts = <50 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_OHCI1>,
++ <&ccu CLK_USB_OHCI1>;
++ resets = <&ccu RST_BUS_OHCI1>;
++ phys = <&usbphy 1>;
++ phy-names = "usb";
++ status = "disabled";
++ };
++
++ emac: ethernet@4500000 {
++ compatible = "allwinner,sun20i-d1-emac",
++ "allwinner,sun50i-a64-emac";
++ reg = <0x4500000 0x10000>;
++ interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
++ interrupt-names = "macirq";
++ clocks = <&ccu CLK_BUS_EMAC>;
++ clock-names = "stmmaceth";
++ resets = <&ccu RST_BUS_EMAC>;
++ reset-names = "stmmaceth";
++ syscon = <&syscon>;
++ status = "disabled";
++
++ mdio: mdio {
++ compatible = "snps,dwmac-mdio";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ };
++ };
++
++ display_clocks: clock-controller@5000000 {
++ compatible = "allwinner,sun20i-d1-de2-clk",
++ "allwinner,sun50i-h5-de2-clk";
++ reg = <0x5000000 0x10000>;
++ clocks = <&ccu CLK_BUS_DE>, <&ccu CLK_DE>;
++ clock-names = "bus", "mod";
++ resets = <&ccu RST_BUS_DE>;
++ #clock-cells = <1>;
++ #reset-cells = <1>;
++ };
++
++ mixer0: mixer@5100000 {
++ compatible = "allwinner,sun20i-d1-de2-mixer-0";
++ reg = <0x5100000 0x100000>;
++ clocks = <&display_clocks CLK_BUS_MIXER0>,
++ <&display_clocks CLK_MIXER0>;
++ clock-names = "bus", "mod";
++ resets = <&display_clocks RST_MIXER0>;
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ mixer0_out: port@1 {
++ reg = <1>;
++
++ mixer0_out_tcon_top_mixer0: endpoint {
++ remote-endpoint = <&tcon_top_mixer0_in_mixer0>;
++ };
++ };
++ };
++ };
++
++ mixer1: mixer@5200000 {
++ compatible = "allwinner,sun20i-d1-de2-mixer-1";
++ reg = <0x5200000 0x100000>;
++ clocks = <&display_clocks CLK_BUS_MIXER1>,
++ <&display_clocks CLK_MIXER1>;
++ clock-names = "bus", "mod";
++ resets = <&display_clocks RST_MIXER1>;
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ mixer1_out: port@1 {
++ reg = <1>;
++
++ mixer1_out_tcon_top_mixer1: endpoint {
++ remote-endpoint = <&tcon_top_mixer1_in_mixer1>;
++ };
++ };
++ };
++ };
++
++ tcon_top: tcon-top@5460000 {
++ compatible = "allwinner,sun20i-d1-tcon-top";
++ reg = <0x5460000 0x1000>;
++ clocks = <&ccu CLK_BUS_DPSS_TOP>,
++ <&ccu CLK_TCON_TV>,
++ <&ccu CLK_TVE>,
++ <&ccu CLK_TCON_LCD0>;
++ clock-names = "bus", "tcon-tv0", "tve0", "dsi";
++ clock-output-names = "tcon-top-tv0", "tcon-top-dsi";
++ resets = <&ccu RST_BUS_DPSS_TOP>;
++ #clock-cells = <1>;
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ tcon_top_mixer0_in: port@0 {
++ reg = <0>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ tcon_top_mixer0_in_mixer0: endpoint@0 {
++ reg = <0>;
++ remote-endpoint = <&mixer0_out_tcon_top_mixer0>;
++ };
++ };
++
++ tcon_top_mixer0_out: port@1 {
++ reg = <1>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ tcon_top_mixer0_out_tcon_lcd0: endpoint@0 {
++ reg = <0>;
++ remote-endpoint = <&tcon_lcd0_in_tcon_top_mixer0>;
++ };
++
++ tcon_top_mixer0_out_tcon_tv0: endpoint@2 {
++ reg = <2>;
++ remote-endpoint = <&tcon_tv0_in_tcon_top_mixer0>;
++ };
++ };
++
++ tcon_top_mixer1_in: port@2 {
++ reg = <2>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ tcon_top_mixer1_in_mixer1: endpoint@1 {
++ reg = <1>;
++ remote-endpoint = <&mixer1_out_tcon_top_mixer1>;
++ };
++ };
++
++ tcon_top_mixer1_out: port@3 {
++ reg = <3>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ tcon_top_mixer1_out_tcon_lcd0: endpoint@0 {
++ reg = <0>;
++ remote-endpoint = <&tcon_lcd0_in_tcon_top_mixer1>;
++ };
++
++ tcon_top_mixer1_out_tcon_tv0: endpoint@2 {
++ reg = <2>;
++ remote-endpoint = <&tcon_tv0_in_tcon_top_mixer1>;
++ };
++ };
++
++ tcon_top_hdmi_in: port@4 {
++ reg = <4>;
++
++ tcon_top_hdmi_in_tcon_tv0: endpoint {
++ remote-endpoint = <&tcon_tv0_out_tcon_top_hdmi>;
++ };
++ };
++
++ tcon_top_hdmi_out: port@5 {
++ reg = <5>;
++ };
++ };
++ };
++
++ tcon_lcd0: lcd-controller@5461000 {
++ compatible = "allwinner,sun20i-d1-tcon-lcd";
++ reg = <0x5461000 0x1000>;
++ interrupts = <106 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_TCON_LCD0>,
++ <&ccu CLK_TCON_LCD0>;
++ clock-names = "ahb", "tcon-ch0";
++ clock-output-names = "tcon-pixel-clock";
++ resets = <&ccu RST_BUS_TCON_LCD0>,
++ <&ccu RST_BUS_LVDS0>;
++ reset-names = "lcd", "lvds";
++ #clock-cells = <0>;
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ tcon_lcd0_in: port@0 {
++ reg = <0>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ tcon_lcd0_in_tcon_top_mixer0: endpoint@0 {
++ reg = <0>;
++ remote-endpoint = <&tcon_top_mixer0_out_tcon_lcd0>;
++ };
++
++ tcon_lcd0_in_tcon_top_mixer1: endpoint@1 {
++ reg = <1>;
++ remote-endpoint = <&tcon_top_mixer1_out_tcon_lcd0>;
++ };
++ };
++
++ tcon_lcd0_out: port@1 {
++ reg = <1>;
++ };
++ };
++ };
++
++ tcon_tv0: lcd-controller@5470000 {
++ compatible = "allwinner,sun20i-d1-tcon-tv";
++ reg = <0x5470000 0x1000>;
++ interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_TCON_TV>,
++ <&tcon_top CLK_TCON_TOP_TV0>;
++ clock-names = "ahb", "tcon-ch1";
++ resets = <&ccu RST_BUS_TCON_TV>;
++ reset-names = "lcd";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ tcon_tv0_in: port@0 {
++ reg = <0>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ tcon_tv0_in_tcon_top_mixer0: endpoint@0 {
++ reg = <0>;
++ remote-endpoint = <&tcon_top_mixer0_out_tcon_tv0>;
++ };
++
++ tcon_tv0_in_tcon_top_mixer1: endpoint@1 {
++ reg = <1>;
++ remote-endpoint = <&tcon_top_mixer1_out_tcon_tv0>;
++ };
++ };
++
++ tcon_tv0_out: port@1 {
++ reg = <1>;
++
++ tcon_tv0_out_tcon_top_hdmi: endpoint {
++ remote-endpoint = <&tcon_top_hdmi_in_tcon_tv0>;
++ };
++ };
++ };
++ };
++
++ riscv_wdt: watchdog@6011000 {
++ compatible = "allwinner,sun20i-d1-wdt";
++ reg = <0x6011000 0x20>;
++ interrupts = <147 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&osc24M>, <&rtc CLK_OSC32K>;
++ clock-names = "hosc", "losc";
++ };
++
++ r_ccu: clock-controller@7010000 {
++ compatible = "allwinner,sun20i-d1-r-ccu";
++ reg = <0x7010000 0x400>;
++ clocks = <&osc24M>,
++ <&rtc CLK_OSC32K>,
++ <&rtc CLK_IOSC>,
++ <&ccu CLK_PLL_PERIPH0_DIV3>;
++ clock-names = "hosc", "losc", "iosc", "pll-periph";
++ #clock-cells = <1>;
++ #reset-cells = <1>;
++ };
++
++ rtc: rtc@7090000 {
++ compatible = "allwinner,sun20i-d1-rtc",
++ "allwinner,sun50i-r329-rtc";
++ reg = <0x7090000 0x400>;
++ interrupts = <160 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&r_ccu CLK_BUS_R_RTC>,
++ <&osc24M>,
++ <&r_ccu CLK_R_AHB>;
++ clock-names = "bus", "hosc", "ahb";
++ #clock-cells = <1>;
++ };
++
++ plic: interrupt-controller@10000000 {
++ compatible = "allwinner,sun20i-d1-plic",
++ "thead,c900-plic";
++ reg = <0x10000000 0x4000000>;
++ interrupts-extended = <&cpu0_intc 11>,
++ <&cpu0_intc 9>;
++ interrupt-controller;
++ riscv,ndev = <176>;
++ #address-cells = <0>;
++ #interrupt-cells = <2>;
++ };
++ };
++};
--- /dev/null
+From 5da27190c54b7a51062786eb01246f6f4cf2ba98 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Tue, 28 Jun 2022 23:31:16 -0500
+Subject: [PATCH 029/117] riscv: dts: allwinner: Add Allwinner D1 Nezha
+ devicetree
+
+"D1 Nezha" is Allwinner's first-party development board for the D1 SoC.
+It was shipped with 512M, 1G, or 2G of DDR3. It supports onboard audio,
+HDMI, gigabit Ethernet, WiFi and Bluetooth, USB 2.0 host and OTG ports,
+plus low-speed I/O from the SoC and a GPIO expander chip.
+
+Most other D1 boards copied the Nezha's power tree, with the 1.8V rail
+powered by the SoCs internal LDOA, analog domains powered by ALDO, and
+the rest of the board powered by always-on fixed regulators. Some (but
+not all) boards also copied the PWM CPU regulator. To avoid duplication,
+factor out the out the regulator references that are common across all
+known boards.
+
+Reviewed-by: Heiko Stuebner <heiko@sntech.de>
+Tested-by: Conor Dooley <conor.dooley@microchip.com>
+Tested-by: Heiko Stuebner <heiko@sntech.de>
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ arch/riscv/boot/dts/allwinner/Makefile | 1 +
+ .../sun20i-d1-common-regulators.dtsi | 51 ++++++
+ .../boot/dts/allwinner/sun20i-d1-nezha.dts | 171 ++++++++++++++++++
+ 3 files changed, 223 insertions(+)
+ create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-common-regulators.dtsi
+ create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
+
+--- a/arch/riscv/boot/dts/allwinner/Makefile
++++ b/arch/riscv/boot/dts/allwinner/Makefile
+@@ -1 +1,2 @@
+ # SPDX-License-Identifier: GPL-2.0
++dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-nezha.dtb
+--- /dev/null
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-common-regulators.dtsi
+@@ -0,0 +1,51 @@
++// SPDX-License-Identifier: (GPL-2.0+ or MIT)
++// Copyright (C) 2021-2022 Samuel Holland <samuel@sholland.org>
++
++/ {
++ reg_vcc: vcc {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ };
++
++ reg_vcc_3v3: vcc-3v3 {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc-3v3";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ vin-supply = <®_vcc>;
++ };
++};
++
++&lradc {
++ vref-supply = <®_aldo>;
++};
++
++&pio {
++ vcc-pb-supply = <®_vcc_3v3>;
++ vcc-pc-supply = <®_vcc_3v3>;
++ vcc-pd-supply = <®_vcc_3v3>;
++ vcc-pe-supply = <®_vcc_3v3>;
++ vcc-pf-supply = <®_vcc_3v3>;
++ vcc-pg-supply = <®_vcc_3v3>;
++};
++
++®_aldo {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ vdd33-supply = <®_vcc_3v3>;
++};
++
++®_hpldo {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ hpldoin-supply = <®_vcc_3v3>;
++};
++
++®_ldoa {
++ regulator-always-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ ldo-in-supply = <®_vcc_3v3>;
++};
+--- /dev/null
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
+@@ -0,0 +1,171 @@
++// SPDX-License-Identifier: (GPL-2.0+ or MIT)
++// Copyright (C) 2021-2022 Samuel Holland <samuel@sholland.org>
++
++/dts-v1/;
++
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/input.h>
++
++#include "sun20i-d1.dtsi"
++#include "sun20i-d1-common-regulators.dtsi"
++
++/ {
++ model = "Allwinner D1 Nezha";
++ compatible = "allwinner,d1-nezha", "allwinner,sun20i-d1";
++
++ aliases {
++ ethernet0 = &emac;
++ ethernet1 = &xr829;
++ mmc0 = &mmc0;
++ serial0 = &uart0;
++ };
++
++ chosen {
++ stdout-path = "serial0:115200n8";
++ };
++
++ reg_usbvbus: usbvbus {
++ compatible = "regulator-fixed";
++ regulator-name = "usbvbus";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ gpio = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */
++ enable-active-high;
++ vin-supply = <®_vcc>;
++ };
++
++ /*
++ * This regulator is PWM-controlled, but the PWM controller is not
++ * yet supported, so fix the regulator to its default voltage.
++ */
++ reg_vdd_cpu: vdd-cpu {
++ compatible = "regulator-fixed";
++ regulator-name = "vdd-cpu";
++ regulator-min-microvolt = <1100000>;
++ regulator-max-microvolt = <1100000>;
++ vin-supply = <®_vcc>;
++ };
++
++ wifi_pwrseq: wifi-pwrseq {
++ compatible = "mmc-pwrseq-simple";
++ reset-gpios = <&pio 6 12 GPIO_ACTIVE_LOW>; /* PG12 */
++ };
++};
++
++&cpu0 {
++ cpu-supply = <®_vdd_cpu>;
++};
++
++&ehci0 {
++ status = "okay";
++};
++
++&ehci1 {
++ status = "okay";
++};
++
++&emac {
++ pinctrl-0 = <&rgmii_pe_pins>;
++ pinctrl-names = "default";
++ phy-handle = <&ext_rgmii_phy>;
++ phy-mode = "rgmii-id";
++ phy-supply = <®_vcc_3v3>;
++ status = "okay";
++};
++
++&i2c2 {
++ pinctrl-0 = <&i2c2_pb0_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++
++ pcf8574a: gpio@38 {
++ compatible = "nxp,pcf8574a";
++ reg = <0x38>;
++ interrupt-parent = <&pio>;
++ interrupts = <1 2 IRQ_TYPE_LEVEL_LOW>; /* PB2 */
++ interrupt-controller;
++ gpio-controller;
++ #gpio-cells = <2>;
++ #interrupt-cells = <2>;
++ };
++};
++
++&lradc {
++ status = "okay";
++
++ button-160 {
++ label = "OK";
++ linux,code = <KEY_OK>;
++ channel = <0>;
++ voltage = <160000>;
++ };
++};
++
++&mdio {
++ ext_rgmii_phy: ethernet-phy@1 {
++ compatible = "ethernet-phy-ieee802.3-c22";
++ reg = <1>;
++ };
++};
++
++&mmc0 {
++ bus-width = <4>;
++ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
++ disable-wp;
++ vmmc-supply = <®_vcc_3v3>;
++ vqmmc-supply = <®_vcc_3v3>;
++ pinctrl-0 = <&mmc0_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++};
++
++&mmc1 {
++ bus-width = <4>;
++ mmc-pwrseq = <&wifi_pwrseq>;
++ non-removable;
++ vmmc-supply = <®_vcc_3v3>;
++ vqmmc-supply = <®_vcc_3v3>;
++ pinctrl-0 = <&mmc1_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++
++ xr829: wifi@1 {
++ reg = <1>;
++ };
++};
++
++&ohci0 {
++ status = "okay";
++};
++
++&ohci1 {
++ status = "okay";
++};
++
++&uart0 {
++ pinctrl-0 = <&uart0_pb8_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++};
++
++&uart1 {
++ uart-has-rtscts;
++ pinctrl-0 = <&uart1_pg6_pins>, <&uart1_pg8_rts_cts_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++
++ /* XR829 bluetooth is connected here */
++};
++
++&usb_otg {
++ dr_mode = "otg";
++ status = "okay";
++};
++
++&usbphy {
++ usb0_id_det-gpios = <&pio 3 21 GPIO_ACTIVE_HIGH>; /* PD21 */
++ usb0_vbus_det-gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
++ usb0_vbus-supply = <®_usbvbus>;
++ usb1_vbus-supply = <®_vcc>;
++ status = "okay";
++};
--- /dev/null
+From 3bf76e93011425ed64a69c462b9959ed2a8ccf46 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Wed, 29 Jun 2022 00:13:50 -0500
+Subject: [PATCH 030/117] riscv: dts: allwinner: Add Sipeed Lichee RV
+ devicetrees
+
+Sipeed manufactures a "Lichee RV" system-on-module, which provides a
+minimal working system on its own, as well as a few carrier boards. The
+"Dock" board provides audio, USB, and WiFi. The "86 Panel" additionally
+provides 100M Ethernet and a built-in display panel.
+
+The 86 Panel repurposes the USB ID and VBUS detection GPIOs for its RGB
+panel interface, since the USB OTG port is inaccessible inside the case.
+
+Co-developed-by: Jisheng Zhang <jszhang@kernel.org>
+Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ arch/riscv/boot/dts/allwinner/Makefile | 4 +
+ .../sun20i-d1-lichee-rv-86-panel-480p.dts | 29 ++++++
+ .../sun20i-d1-lichee-rv-86-panel-720p.dts | 10 ++
+ .../sun20i-d1-lichee-rv-86-panel.dtsi | 92 +++++++++++++++++++
+ .../allwinner/sun20i-d1-lichee-rv-dock.dts | 74 +++++++++++++++
+ .../dts/allwinner/sun20i-d1-lichee-rv.dts | 84 +++++++++++++++++
+ 6 files changed, 293 insertions(+)
+ create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel-480p.dts
+ create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel-720p.dts
+ create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel.dtsi
+ create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dts
+ create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv.dts
+
+--- a/arch/riscv/boot/dts/allwinner/Makefile
++++ b/arch/riscv/boot/dts/allwinner/Makefile
+@@ -1,2 +1,6 @@
+ # SPDX-License-Identifier: GPL-2.0
++dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-86-panel-480p.dtb
++dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-86-panel-720p.dtb
++dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-dock.dtb
++dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv.dtb
+ dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-nezha.dtb
+--- /dev/null
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel-480p.dts
+@@ -0,0 +1,29 @@
++// SPDX-License-Identifier: (GPL-2.0+ or MIT)
++// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
++
++#include "sun20i-d1-lichee-rv-86-panel.dtsi"
++
++/ {
++ model = "Sipeed Lichee RV 86 Panel (480p)";
++ compatible = "sipeed,lichee-rv-86-panel-480p", "sipeed,lichee-rv",
++ "allwinner,sun20i-d1";
++};
++
++&i2c2 {
++ pinctrl-0 = <&i2c2_pb0_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++
++ touchscreen@48 {
++ compatible = "focaltech,ft6236";
++ reg = <0x48>;
++ interrupt-parent = <&pio>;
++ interrupts = <6 14 IRQ_TYPE_LEVEL_LOW>; /* PG14 */
++ iovcc-supply = <®_vcc_3v3>;
++ reset-gpios = <&pio 6 15 GPIO_ACTIVE_LOW>; /* PG15 */
++ touchscreen-size-x = <480>;
++ touchscreen-size-y = <480>;
++ vcc-supply = <®_vcc_3v3>;
++ wakeup-source;
++ };
++};
+--- /dev/null
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel-720p.dts
+@@ -0,0 +1,10 @@
++// SPDX-License-Identifier: (GPL-2.0+ or MIT)
++// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
++
++#include "sun20i-d1-lichee-rv-86-panel.dtsi"
++
++/ {
++ model = "Sipeed Lichee RV 86 Panel (720p)";
++ compatible = "sipeed,lichee-rv-86-panel-720p", "sipeed,lichee-rv",
++ "allwinner,sun20i-d1";
++};
+--- /dev/null
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel.dtsi
+@@ -0,0 +1,92 @@
++// SPDX-License-Identifier: (GPL-2.0+ or MIT)
++// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
++
++#include "sun20i-d1-lichee-rv.dts"
++
++/ {
++ aliases {
++ ethernet0 = &emac;
++ ethernet1 = &xr829;
++ };
++
++ /* PC1 is repurposed as BT_WAKE_AP */
++ /delete-node/ leds;
++
++ wifi_pwrseq: wifi-pwrseq {
++ compatible = "mmc-pwrseq-simple";
++ clocks = <&ccu CLK_FANOUT1>;
++ clock-names = "ext_clock";
++ reset-gpios = <&pio 6 12 GPIO_ACTIVE_LOW>; /* PG12 */
++ assigned-clocks = <&ccu CLK_FANOUT1>;
++ assigned-clock-rates = <32768>;
++ pinctrl-0 = <&clk_pg11_pin>;
++ pinctrl-names = "default";
++ };
++};
++
++&ehci1 {
++ status = "okay";
++};
++
++&emac {
++ pinctrl-0 = <&rmii_pe_pins>;
++ pinctrl-names = "default";
++ phy-handle = <&ext_rmii_phy>;
++ phy-mode = "rmii";
++ phy-supply = <®_vcc_3v3>;
++ status = "okay";
++};
++
++&mdio {
++ ext_rmii_phy: ethernet-phy@1 {
++ compatible = "ethernet-phy-ieee802.3-c22";
++ reg = <1>;
++ reset-gpios = <&pio 4 16 GPIO_ACTIVE_LOW>; /* PE16 */
++ };
++};
++
++&mmc1 {
++ bus-width = <4>;
++ mmc-pwrseq = <&wifi_pwrseq>;
++ non-removable;
++ vmmc-supply = <®_vcc_3v3>;
++ vqmmc-supply = <®_vcc_3v3>;
++ pinctrl-0 = <&mmc1_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++
++ xr829: wifi@1 {
++ reg = <1>;
++ };
++};
++
++&ohci1 {
++ status = "okay";
++};
++
++&pio {
++ clk_pg11_pin: clk-pg11-pin {
++ pins = "PG11";
++ function = "clk";
++ };
++};
++
++&uart1 {
++ uart-has-rtscts;
++ pinctrl-0 = <&uart1_pg6_pins>, <&uart1_pg8_rts_cts_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++
++ /* XR829 bluetooth is connected here */
++};
++
++&usb_otg {
++ status = "disabled";
++};
++
++&usbphy {
++ /* PD20 and PD21 are repurposed for the LCD panel */
++ /delete-property/ usb0_id_det-gpios;
++ /delete-property/ usb0_vbus_det-gpios;
++ usb1_vbus-supply = <®_vcc>;
++};
+--- /dev/null
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dts
+@@ -0,0 +1,74 @@
++// SPDX-License-Identifier: (GPL-2.0+ or MIT)
++// Copyright (C) 2022 Jisheng Zhang <jszhang@kernel.org>
++// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
++
++#include <dt-bindings/input/input.h>
++
++#include "sun20i-d1-lichee-rv.dts"
++
++/ {
++ model = "Sipeed Lichee RV Dock";
++ compatible = "sipeed,lichee-rv-dock", "sipeed,lichee-rv",
++ "allwinner,sun20i-d1";
++
++ aliases {
++ ethernet1 = &rtl8723ds;
++ };
++
++ wifi_pwrseq: wifi-pwrseq {
++ compatible = "mmc-pwrseq-simple";
++ reset-gpios = <&pio 6 12 GPIO_ACTIVE_LOW>; /* PG12 */
++ };
++};
++
++&ehci1 {
++ status = "okay";
++};
++
++&lradc {
++ status = "okay";
++
++ button-220 {
++ label = "OK";
++ linux,code = <KEY_OK>;
++ channel = <0>;
++ voltage = <220000>;
++ };
++};
++
++&mmc1 {
++ bus-width = <4>;
++ mmc-pwrseq = <&wifi_pwrseq>;
++ non-removable;
++ vmmc-supply = <®_vcc_3v3>;
++ vqmmc-supply = <®_vcc_3v3>;
++ pinctrl-0 = <&mmc1_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++
++ rtl8723ds: wifi@1 {
++ reg = <1>;
++ };
++};
++
++&ohci1 {
++ status = "okay";
++};
++
++&uart1 {
++ uart-has-rtscts;
++ pinctrl-0 = <&uart1_pg6_pins>, <&uart1_pg8_rts_cts_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++
++ bluetooth {
++ compatible = "realtek,rtl8723ds-bt";
++ device-wake-gpios = <&pio 6 15 GPIO_ACTIVE_HIGH>; /* PG16 */
++ enable-gpios = <&pio 6 18 GPIO_ACTIVE_HIGH>; /* PG18 */
++ host-wake-gpios = <&pio 6 17 GPIO_ACTIVE_HIGH>; /* PG17 */
++ };
++};
++
++&usbphy {
++ usb1_vbus-supply = <®_vcc>;
++};
+--- /dev/null
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv.dts
+@@ -0,0 +1,84 @@
++// SPDX-License-Identifier: (GPL-2.0+ or MIT)
++// Copyright (C) 2022 Jisheng Zhang <jszhang@kernel.org>
++// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
++
++/dts-v1/;
++
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/leds/common.h>
++
++#include "sun20i-d1.dtsi"
++#include "sun20i-d1-common-regulators.dtsi"
++
++/ {
++ model = "Sipeed Lichee RV";
++ compatible = "sipeed,lichee-rv", "allwinner,sun20i-d1";
++
++ aliases {
++ mmc0 = &mmc0;
++ serial0 = &uart0;
++ };
++
++ chosen {
++ stdout-path = "serial0:115200n8";
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ led-0 {
++ color = <LED_COLOR_ID_GREEN>;
++ function = LED_FUNCTION_STATUS;
++ gpios = <&pio 2 1 GPIO_ACTIVE_HIGH>; /* PC1 */
++ };
++ };
++
++ reg_vdd_cpu: vdd-cpu {
++ compatible = "regulator-fixed";
++ regulator-name = "vdd-cpu";
++ regulator-min-microvolt = <900000>;
++ regulator-max-microvolt = <900000>;
++ vin-supply = <®_vcc>;
++ };
++};
++
++&cpu0 {
++ cpu-supply = <®_vdd_cpu>;
++};
++
++&ehci0 {
++ status = "okay";
++};
++
++&mmc0 {
++ broken-cd;
++ bus-width = <4>;
++ disable-wp;
++ vmmc-supply = <®_vcc_3v3>;
++ vqmmc-supply = <®_vcc_3v3>;
++ pinctrl-0 = <&mmc0_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++};
++
++&ohci0 {
++ status = "okay";
++};
++
++&uart0 {
++ pinctrl-0 = <&uart0_pb8_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++};
++
++&usb_otg {
++ dr_mode = "otg";
++ status = "okay";
++};
++
++&usbphy {
++ usb0_id_det-gpios = <&pio 3 21 GPIO_ACTIVE_HIGH>; /* PD21 */
++ usb0_vbus_det-gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
++ usb0_vbus-supply = <®_vcc>;
++ status = "okay";
++};
--- /dev/null
+From 3cf55c25453517960d72b56d1ba8f12840b1990e Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sat, 9 Jul 2022 17:43:17 -0500
+Subject: [PATCH 031/117] riscv: dts: allwinner: Add MangoPi MQ Pro devicetree
+
+The MangoPi MQ Pro is a tiny SBC with a layout compatible to the
+Raspberry Pi Zero. It includes the Allwinner D1 SoC, 512M or 1G of DDR3,
+and an RTL8723DS-based WiFi/Bluetooth module.
+
+The board also exposes GPIO Port E via a connector on the end of the
+board, which can support either a camera or an RMII Ethernet PHY. The
+additional regulators supply that connector.
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ arch/riscv/boot/dts/allwinner/Makefile | 1 +
+ .../allwinner/sun20i-d1-mangopi-mq-pro.dts | 128 ++++++++++++++++++
+ 2 files changed, 129 insertions(+)
+ create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-mangopi-mq-pro.dts
+
+--- a/arch/riscv/boot/dts/allwinner/Makefile
++++ b/arch/riscv/boot/dts/allwinner/Makefile
+@@ -3,4 +3,5 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-li
+ dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-86-panel-720p.dtb
+ dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-dock.dtb
+ dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv.dtb
++dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-mangopi-mq-pro.dtb
+ dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-nezha.dtb
+--- /dev/null
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-mangopi-mq-pro.dts
+@@ -0,0 +1,128 @@
++// SPDX-License-Identifier: (GPL-2.0+ or MIT)
++// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
++
++/dts-v1/;
++
++#include <dt-bindings/gpio/gpio.h>
++
++#include "sun20i-d1.dtsi"
++#include "sun20i-d1-common-regulators.dtsi"
++
++/ {
++ model = "MangoPi MQ Pro";
++ compatible = "widora,mangopi-mq-pro", "allwinner,sun20i-d1";
++
++ aliases {
++ ethernet0 = &rtl8723ds;
++ mmc0 = &mmc0;
++ serial0 = &uart0;
++ };
++
++ chosen {
++ stdout-path = "serial0:115200n8";
++ };
++
++ reg_avdd2v8: avdd2v8 {
++ compatible = "regulator-fixed";
++ regulator-name = "avdd2v8";
++ regulator-min-microvolt = <2800000>;
++ regulator-max-microvolt = <2800000>;
++ vin-supply = <®_vcc_3v3>;
++ };
++
++ reg_dvdd: dvdd {
++ compatible = "regulator-fixed";
++ regulator-name = "dvdd";
++ regulator-min-microvolt = <1200000>;
++ regulator-max-microvolt = <1200000>;
++ vin-supply = <®_vcc_3v3>;
++ };
++
++ reg_vdd_cpu: vdd-cpu {
++ compatible = "regulator-fixed";
++ regulator-name = "vdd-cpu";
++ regulator-min-microvolt = <1100000>;
++ regulator-max-microvolt = <1100000>;
++ vin-supply = <®_vcc>;
++ };
++
++ wifi_pwrseq: wifi-pwrseq {
++ compatible = "mmc-pwrseq-simple";
++ reset-gpios = <&pio 6 17 GPIO_ACTIVE_LOW>; /* PG17 */
++ };
++};
++
++&cpu0 {
++ cpu-supply = <®_vdd_cpu>;
++};
++
++&ehci1 {
++ status = "okay";
++};
++
++&mmc0 {
++ bus-width = <4>;
++ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
++ disable-wp;
++ vmmc-supply = <®_vcc_3v3>;
++ vqmmc-supply = <®_vcc_3v3>;
++ pinctrl-0 = <&mmc0_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++};
++
++&mmc1 {
++ bus-width = <4>;
++ mmc-pwrseq = <&wifi_pwrseq>;
++ non-removable;
++ vmmc-supply = <®_vcc_3v3>;
++ vqmmc-supply = <®_vcc_3v3>;
++ pinctrl-0 = <&mmc1_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++
++ rtl8723ds: wifi@1 {
++ reg = <1>;
++ interrupt-parent = <&pio>;
++ interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 */
++ interrupt-names = "host-wake";
++ };
++};
++
++&ohci1 {
++ status = "okay";
++};
++
++&pio {
++ vcc-pe-supply = <®_avdd2v8>;
++};
++
++&uart0 {
++ pinctrl-0 = <&uart0_pb8_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++};
++
++&uart1 {
++ uart-has-rtscts;
++ pinctrl-0 = <&uart1_pg6_pins>, <&uart1_pg8_rts_cts_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++
++ bluetooth {
++ compatible = "realtek,rtl8723ds-bt";
++ device-wake-gpios = <&pio 6 18 GPIO_ACTIVE_HIGH>; /* PG18 */
++ enable-gpios = <&pio 6 15 GPIO_ACTIVE_HIGH>; /* PG15 */
++ host-wake-gpios = <&pio 6 14 GPIO_ACTIVE_HIGH>; /* PG14 */
++ };
++};
++
++&usb_otg {
++ dr_mode = "peripheral";
++ status = "okay";
++};
++
++&usbphy {
++ usb0_vbus-supply = <®_vcc>;
++ status = "okay";
++};
--- /dev/null
+From 1f26c90ac9cbb60ff315c552368a3bca16562e51 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sun, 10 Jul 2022 11:24:42 -0500
+Subject: [PATCH 032/117] riscv: dts: allwinner: Add Dongshan Nezha STU
+ devicetree
+
+The 100ask Dongshan Nezha STU is a system-on-module that can be used
+standalone or with a carrier board. The SoM provides gigabit Ethernet,
+HDMI, a USB peripheral port, and WiFi/Bluetooth via an RTL8723DS chip.
+
+The "DIY" carrier board exposes almost every pin from the D1 SoC to 0.1"
+headers, but contains no digital circuitry, so it does not have its own
+devicetree.
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ arch/riscv/boot/dts/allwinner/Makefile | 1 +
+ .../sun20i-d1-dongshan-nezha-stu.dts | 114 ++++++++++++++++++
+ 2 files changed, 115 insertions(+)
+ create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-dongshan-nezha-stu.dts
+
+--- a/arch/riscv/boot/dts/allwinner/Makefile
++++ b/arch/riscv/boot/dts/allwinner/Makefile
+@@ -1,4 +1,5 @@
+ # SPDX-License-Identifier: GPL-2.0
++dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-dongshan-nezha-stu.dtb
+ dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-86-panel-480p.dtb
+ dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-86-panel-720p.dtb
+ dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-dock.dtb
+--- /dev/null
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-dongshan-nezha-stu.dts
+@@ -0,0 +1,114 @@
++// SPDX-License-Identifier: (GPL-2.0+ or MIT)
++// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
++
++/dts-v1/;
++
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/leds/common.h>
++
++#include "sun20i-d1.dtsi"
++#include "sun20i-d1-common-regulators.dtsi"
++
++/ {
++ model = "Dongshan Nezha STU";
++ compatible = "100ask,dongshan-nezha-stu", "allwinner,sun20i-d1";
++
++ aliases {
++ ethernet0 = &emac;
++ mmc0 = &mmc0;
++ serial0 = &uart0;
++ };
++
++ chosen {
++ stdout-path = "serial0:115200n8";
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ led-0 {
++ color = <LED_COLOR_ID_GREEN>;
++ function = LED_FUNCTION_STATUS;
++ gpios = <&pio 2 1 GPIO_ACTIVE_HIGH>; /* PC1 */
++ };
++ };
++
++ reg_usbvbus: usbvbus {
++ compatible = "regulator-fixed";
++ regulator-name = "usbvbus";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ gpio = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */
++ enable-active-high;
++ vin-supply = <®_vcc>;
++ };
++
++ /*
++ * This regulator is PWM-controlled, but the PWM controller is not
++ * yet supported, so fix the regulator to its default voltage.
++ */
++ reg_vdd_cpu: vdd-cpu {
++ compatible = "regulator-fixed";
++ regulator-name = "vdd-cpu";
++ regulator-min-microvolt = <1100000>;
++ regulator-max-microvolt = <1100000>;
++ vin-supply = <®_vcc>;
++ };
++};
++
++&cpu0 {
++ cpu-supply = <®_vdd_cpu>;
++};
++
++&ehci0 {
++ status = "okay";
++};
++
++&emac {
++ pinctrl-0 = <&rgmii_pe_pins>;
++ pinctrl-names = "default";
++ phy-handle = <&ext_rgmii_phy>;
++ phy-mode = "rgmii-id";
++ phy-supply = <®_vcc_3v3>;
++ status = "okay";
++};
++
++&mdio {
++ ext_rgmii_phy: ethernet-phy@1 {
++ compatible = "ethernet-phy-ieee802.3-c22";
++ reg = <1>;
++ };
++};
++
++&mmc0 {
++ broken-cd;
++ bus-width = <4>;
++ disable-wp;
++ vmmc-supply = <®_vcc_3v3>;
++ vqmmc-supply = <®_vcc_3v3>;
++ pinctrl-0 = <&mmc0_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++};
++
++&ohci0 {
++ status = "okay";
++};
++
++&uart0 {
++ pinctrl-0 = <&uart0_pb8_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++};
++
++&usb_otg {
++ dr_mode = "otg";
++ status = "okay";
++};
++
++&usbphy {
++ usb0_id_det-gpios = <&pio 3 21 GPIO_ACTIVE_HIGH>; /* PD21 */
++ usb0_vbus_det-gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
++ usb0_vbus-supply = <®_usbvbus>;
++ status = "okay";
++};
--- /dev/null
+From 11f692c6b009f36b9a91d5ceb5998ae15e57f18c Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sun, 10 Jul 2022 23:43:49 -0500
+Subject: [PATCH 033/117] riscv: dts: allwinner: Add ClockworkPi and DevTerm
+ devicetrees
+
+Clockwork Tech manufactures several SoMs for their RasPi CM3-compatible
+"ClockworkPi" mainboard. Their R-01 SoM features the Allwinner D1 SoC.
+The R-01 contains only the CPU, DRAM, and always-on voltage regulation;
+it does not merit a separate devicetree.
+
+The ClockworkPi mainboard features analog audio, a MIPI-DSI panel, USB
+host and peripheral ports, an Ampak AP6256 WiFi/Bluetooth module, and an
+X-Powers AXP228 PMIC for managing a Li-ion battery.
+
+The DevTerm is a complete system which extends the ClockworkPi mainboard
+with a pair of expansion boards. These expansion boards provide a fan, a
+keyboard, speakers, and a thermal printer.
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ arch/riscv/boot/dts/allwinner/Makefile | 2 +
+ .../allwinner/sun20i-d1-clockworkpi-v3.14.dts | 242 ++++++++++++++++++
+ .../dts/allwinner/sun20i-d1-devterm-v3.14.dts | 37 +++
+ 3 files changed, 281 insertions(+)
+ create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-clockworkpi-v3.14.dts
+ create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-devterm-v3.14.dts
+
+--- a/arch/riscv/boot/dts/allwinner/Makefile
++++ b/arch/riscv/boot/dts/allwinner/Makefile
+@@ -1,4 +1,6 @@
+ # SPDX-License-Identifier: GPL-2.0
++dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-clockworkpi-v3.14.dtb
++dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-devterm-v3.14.dtb
+ dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-dongshan-nezha-stu.dtb
+ dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-86-panel-480p.dtb
+ dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-86-panel-720p.dtb
+--- /dev/null
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-clockworkpi-v3.14.dts
+@@ -0,0 +1,242 @@
++// SPDX-License-Identifier: (GPL-2.0+ or MIT)
++// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
++
++/dts-v1/;
++
++#include <dt-bindings/gpio/gpio.h>
++
++#include "sun20i-d1.dtsi"
++#include "sun20i-d1-common-regulators.dtsi"
++
++/ {
++ model = "ClockworkPi v3.14 (R-01)";
++ compatible = "clockwork,r-01-clockworkpi-v3.14", "allwinner,sun20i-d1";
++
++ aliases {
++ ethernet0 = &ap6256;
++ mmc0 = &mmc0;
++ serial0 = &uart0;
++ };
++
++ chosen {
++ stdout-path = "serial0:115200n8";
++ };
++
++ /*
++ * This regulator is PWM-controlled, but the PWM controller is not
++ * yet supported, so fix the regulator to its default voltage.
++ */
++ reg_vdd_cpu: vdd-cpu {
++ compatible = "regulator-fixed";
++ regulator-name = "vdd-cpu";
++ regulator-min-microvolt = <1100000>;
++ regulator-max-microvolt = <1100000>;
++ vin-supply = <®_vcc>;
++ };
++
++ wifi_pwrseq: wifi-pwrseq {
++ compatible = "mmc-pwrseq-simple";
++ reset-gpios = <&pio 6 11 GPIO_ACTIVE_LOW>; /* PG11/GPIO3 */
++ };
++};
++
++&cpu0 {
++ cpu-supply = <®_vdd_cpu>;
++};
++
++&ehci1 {
++ status = "okay";
++};
++
++&i2c0 {
++ pinctrl-0 = <&i2c0_pb10_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++
++ axp221: pmic@34 {
++ compatible = "x-powers,axp228", "x-powers,axp221";
++ reg = <0x34>;
++ interrupt-parent = <&pio>;
++ interrupts = <4 9 IRQ_TYPE_LEVEL_LOW>; /* PE9/GPIO2 */
++ interrupt-controller;
++ #interrupt-cells = <1>;
++
++ ac_power_supply: ac-power {
++ compatible = "x-powers,axp221-ac-power-supply";
++ };
++
++ axp_adc: adc {
++ compatible = "x-powers,axp221-adc";
++ #io-channel-cells = <1>;
++ };
++
++ battery_power_supply: battery-power {
++ compatible = "x-powers,axp221-battery-power-supply";
++ };
++
++ regulators {
++ x-powers,dcdc-freq = <3000>;
++
++ reg_dcdc1: dcdc1 {
++ regulator-name = "sys-3v3";
++ regulator-always-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ };
++
++ reg_dcdc3: dcdc3 {
++ regulator-name = "sys-1v8";
++ regulator-always-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ };
++
++ reg_aldo1: aldo1 {
++ regulator-name = "aud-3v3";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ };
++
++ reg_aldo2: aldo2 {
++ regulator-name = "disp-3v3";
++ regulator-always-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ };
++
++ reg_aldo3: aldo3 {
++ regulator-name = "vdd-wifi";
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ };
++
++ /* DLDO1 and ELDO1-3 are connected in parallel. */
++ reg_dldo1: dldo1 {
++ regulator-name = "vbat-wifi-a";
++ regulator-always-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ };
++
++ /* DLDO2-DLDO4 are connected in parallel. */
++ reg_dldo2: dldo2 {
++ regulator-name = "vcc-3v3-ext-a";
++ regulator-always-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ };
++
++ reg_dldo3: dldo3 {
++ regulator-name = "vcc-3v3-ext-b";
++ regulator-always-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ };
++
++ reg_dldo4: dldo4 {
++ regulator-name = "vcc-3v3-ext-c";
++ regulator-always-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ };
++
++ reg_eldo1: eldo1 {
++ regulator-name = "vbat-wifi-b";
++ regulator-always-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ };
++
++ reg_eldo2: eldo2 {
++ regulator-name = "vbat-wifi-c";
++ regulator-always-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ };
++
++ reg_eldo3: eldo3 {
++ regulator-name = "vbat-wifi-d";
++ regulator-always-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ };
++ };
++
++ usb_power_supply: usb-power {
++ compatible = "x-powers,axp221-usb-power-supply";
++ status = "disabled";
++ };
++ };
++};
++
++&mmc0 {
++ broken-cd;
++ bus-width = <4>;
++ disable-wp;
++ vmmc-supply = <®_dcdc1>;
++ vqmmc-supply = <®_vcc_3v3>;
++ pinctrl-0 = <&mmc0_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++};
++
++&mmc1 {
++ bus-width = <4>;
++ mmc-pwrseq = <&wifi_pwrseq>;
++ non-removable;
++ vmmc-supply = <®_dldo1>;
++ vqmmc-supply = <®_aldo3>;
++ pinctrl-0 = <&mmc1_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++
++ ap6256: wifi@1 {
++ compatible = "brcm,bcm43456-fmac", "brcm,bcm4329-fmac";
++ reg = <1>;
++ interrupt-parent = <&pio>;
++ interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10/GPIO4 */
++ interrupt-names = "host-wake";
++ };
++};
++
++&ohci1 {
++ status = "okay";
++};
++
++&pio {
++ vcc-pg-supply = <®_ldoa>;
++};
++
++&uart0 {
++ pinctrl-0 = <&uart0_pb8_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++};
++
++&uart1 {
++ uart-has-rtscts;
++ pinctrl-0 = <&uart1_pg6_pins>, <&uart1_pg8_rts_cts_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++
++ bluetooth {
++ compatible = "brcm,bcm4345c5";
++ interrupt-parent = <&pio>;
++ interrupts = <6 17 IRQ_TYPE_LEVEL_HIGH>; /* PG17/GPIO6 */
++ device-wakeup-gpios = <&pio 6 16 GPIO_ACTIVE_HIGH>; /* PG16/GPIO7 */
++ shutdown-gpios = <&pio 6 18 GPIO_ACTIVE_HIGH>; /* PG18/GPIO5 */
++ max-speed = <1500000>;
++ vbat-supply = <®_dldo1>;
++ vddio-supply = <®_aldo3>;
++ };
++};
++
++&usb_otg {
++ dr_mode = "peripheral";
++ status = "okay";
++};
++
++&usbphy {
++ usb0_vbus_power-supply = <&ac_power_supply>;
++ status = "okay";
++};
+--- /dev/null
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-devterm-v3.14.dts
+@@ -0,0 +1,37 @@
++// SPDX-License-Identifier: (GPL-2.0+ or MIT)
++// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
++
++/dts-v1/;
++
++#include "sun20i-d1-clockworkpi-v3.14.dts"
++
++/ {
++ model = "Clockwork DevTerm (R-01)";
++ compatible = "clockwork,r-01-devterm-v3.14",
++ "clockwork,r-01-clockworkpi-v3.14",
++ "allwinner,sun20i-d1";
++
++ fan {
++ compatible = "gpio-fan";
++ gpios = <&pio 3 10 GPIO_ACTIVE_HIGH>; /* PD10/GPIO41 */
++ gpio-fan,speed-map = <0 0>,
++ <6000 1>;
++ #cooling-cells = <2>;
++ };
++
++ i2c-gpio-0 {
++ compatible = "i2c-gpio";
++ sda-gpios = <&pio 3 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PD14/GPIO44 */
++ scl-gpios = <&pio 3 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PD15/GPIO45 */
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ adc@54 {
++ compatible = "ti,adc101c";
++ reg = <0x54>;
++ interrupt-parent = <&pio>;
++ interrupts = <4 12 IRQ_TYPE_LEVEL_LOW>; /* PE12/GPIO35 */
++ vref-supply = <®_dldo2>;
++ };
++ };
++};
--- /dev/null
+From f648ec2a040efde432876ee04240cb71e4c24d6e Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sun, 16 May 2021 14:17:45 -0500
+Subject: [PATCH 034/117] riscv: Add the Allwinner SoC family Kconfig option
+
+Allwinner manufactures the sunxi family of application processors. This
+includes the "sun8i" series of ARMv7 SoCs, the "sun50i" series of ARMv8
+SoCs, and now the "sun20i" series of 64-bit RISC-V SoCs.
+
+The first SoC in the sun20i series is D1, containing a single T-HEAD
+C906 core. D1s is a low-pin-count variant of D1 with co-packaged DRAM.
+
+Most peripherals are shared across the entire chip family. In fact, the
+ARMv7 T113 SoC is pin-compatible and almost entirely register-compatible
+with the D1s.
+
+This means many existing device drivers can be reused. To facilitate
+this reuse, name the symbol ARCH_SUNXI, since that is what the existing
+drivers have as their dependency.
+
+Reviewed-by: Heiko Stuebner <heiko@sntech.de>
+Tested-by: Heiko Stuebner <heiko@sntech.de>
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ arch/riscv/Kconfig.socs | 9 +++++++++
+ 1 file changed, 9 insertions(+)
+
+--- a/arch/riscv/Kconfig.socs
++++ b/arch/riscv/Kconfig.socs
+@@ -1,5 +1,14 @@
+ menu "SoC selection"
+
++config ARCH_SUNXI
++ bool "Allwinner sun20i SoCs"
++ select ERRATA_THEAD if MMU && !XIP_KERNEL
++ select SIFIVE_PLIC
++ select SUN4I_TIMER
++ help
++ This enables support for Allwinner sun20i platform hardware,
++ including boards based on the D1 and D1s SoCs.
++
+ config SOC_MICROCHIP_POLARFIRE
+ bool "Microchip PolarFire SoCs"
+ select MCHP_CLK_MPFS
--- /dev/null
+From 73f9cc8568b6b821107d5194fa868e922b159091 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Mon, 27 Jun 2022 01:33:05 -0500
+Subject: [PATCH 035/117] riscv: defconfig: Enable the Allwinner D1 platform
+ and drivers
+
+Now that several D1-based boards are supported, enable the platform in
+our defconfig. Build in the drivers which are necessary to boot, such as
+the pinctrl, MMC, RTC (which provides critical clocks), SPI (for flash),
+and watchdog (which may be left enabled by the bootloader). Other common
+onboard peripherals are enabled as modules.
+
+Cover-letter:
+riscv: Allwinner D1 platform support
+This series adds the Kconfig/defconfig plumbing and devicetrees for a
+range of Allwinner D1-based boards. Many features are already enabled,
+including USB, Ethernet, and WiFi.
+
+The SoC devicetree uses bindings from the following series which have
+not yet been merged:
+- SRAM controller:
+ https://lore.kernel.org/lkml/20220815041248.53268-1-samuel@sholland.org/
+- NVMEM cell bits property change:
+ https://lore.kernel.org/lkml/20220814173656.11856-1-samuel@sholland.org/
+- In-package LDO regulators:
+ https://lore.kernel.org/lkml/20220815043436.20170-1-samuel@sholland.org/
+
+All three of these are required to set the correct I/O domain voltages
+in the pin controller, which I would consider important to have in the
+initial version of the devicetree.
+
+The SoC devicetree does contain one small hack to avoid a dependency on
+the audio codec binding, since that is not ready yet: the codec node
+uses a bare "simple-mfd", "syscon" compatible.
+END
+
+Series-to: Chen-Yu Tsai <wens@csie.org>
+Series-to: Jernej Skrabec <jernej.skrabec@gmail.com>
+Series-to: linux-sunxi@lists.linux.dev
+Series-to: Palmer Dabbelt <palmer@dabbelt.com>
+Series-to: Paul Walmsley <paul.walmsley@sifive.com>
+Series-to: Albert Ou <aou@eecs.berkeley.edu>
+Series-to: linux-riscv@lists.infradead.org
+Series-cc: Rob Herring <robh+dt@kernel.org>
+Series-cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
+Series-cc: devicetree@vger.kernel.org
+Series-cc: linux-kernel@vger.kernel.org
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ arch/riscv/configs/defconfig | 23 ++++++++++++++++++++++-
+ 1 file changed, 22 insertions(+), 1 deletion(-)
+
+--- a/arch/riscv/configs/defconfig
++++ b/arch/riscv/configs/defconfig
+@@ -25,6 +25,7 @@ CONFIG_BLK_DEV_INITRD=y
+ CONFIG_EXPERT=y
+ # CONFIG_SYSFS_SYSCALL is not set
+ CONFIG_PROFILING=y
++CONFIG_ARCH_SUNXI=y
+ CONFIG_SOC_MICROCHIP_POLARFIRE=y
+ CONFIG_SOC_SIFIVE=y
+ CONFIG_SOC_STARFIVE=y
+@@ -118,22 +119,31 @@ CONFIG_VIRTIO_NET=y
+ CONFIG_MACB=y
+ CONFIG_E1000E=y
+ CONFIG_R8169=y
++CONFIG_STMMAC_ETH=m
+ CONFIG_MICROSEMI_PHY=y
+ CONFIG_INPUT_MOUSEDEV=y
++CONFIG_KEYBOARD_SUN4I_LRADC=m
+ CONFIG_SERIAL_8250=y
+ CONFIG_SERIAL_8250_CONSOLE=y
++CONFIG_SERIAL_8250_DW=y
+ CONFIG_SERIAL_OF_PLATFORM=y
+ CONFIG_VIRTIO_CONSOLE=y
+ CONFIG_HW_RANDOM=y
+ CONFIG_HW_RANDOM_VIRTIO=y
++CONFIG_I2C_MV64XXX=m
+ CONFIG_SPI=y
+ CONFIG_SPI_SIFIVE=y
++CONFIG_SPI_SUN6I=y
+ # CONFIG_PTP_1588_CLOCK is not set
+-CONFIG_GPIOLIB=y
+ CONFIG_GPIO_SIFIVE=y
++CONFIG_WATCHDOG=y
++CONFIG_SUNXI_WATCHDOG=y
++CONFIG_REGULATOR=y
++CONFIG_REGULATOR_FIXED_VOLTAGE=y
+ CONFIG_DRM=m
+ CONFIG_DRM_RADEON=m
+ CONFIG_DRM_NOUVEAU=m
++CONFIG_DRM_SUN4I=m
+ CONFIG_DRM_VIRTIO_GPU=m
+ CONFIG_FB=y
+ CONFIG_FRAMEBUFFER_CONSOLE=y
+@@ -146,19 +156,30 @@ CONFIG_USB_OHCI_HCD=y
+ CONFIG_USB_OHCI_HCD_PLATFORM=y
+ CONFIG_USB_STORAGE=y
+ CONFIG_USB_UAS=y
++CONFIG_USB_MUSB_HDRC=m
++CONFIG_USB_MUSB_SUNXI=m
++CONFIG_NOP_USB_XCEIV=m
+ CONFIG_MMC=y
+ CONFIG_MMC_SDHCI=y
+ CONFIG_MMC_SDHCI_PLTFM=y
+ CONFIG_MMC_SDHCI_CADENCE=y
+ CONFIG_MMC_SPI=y
++CONFIG_MMC_SUNXI=y
+ CONFIG_RTC_CLASS=y
++CONFIG_RTC_DRV_SUN6I=y
++CONFIG_DMADEVICES=y
++CONFIG_DMA_SUN6I=m
+ CONFIG_VIRTIO_PCI=y
+ CONFIG_VIRTIO_BALLOON=y
+ CONFIG_VIRTIO_INPUT=y
+ CONFIG_VIRTIO_MMIO=y
++CONFIG_SUN8I_DE2_CCU=m
++CONFIG_SUN50I_IOMMU=y
+ CONFIG_RPMSG_CHAR=y
+ CONFIG_RPMSG_CTRL=y
+ CONFIG_RPMSG_VIRTIO=y
++CONFIG_PHY_SUN4I_USB=m
++CONFIG_NVMEM_SUNXI_SID=y
+ CONFIG_EXT4_FS=y
+ CONFIG_EXT4_FS_POSIX_ACL=y
+ CONFIG_EXT4_FS_SECURITY=y
--- /dev/null
+From bf83f1dc034111aac1f23b98d7205d08c7c83208 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Wed, 17 Aug 2022 02:33:25 -0500
+Subject: [PATCH 036/117] riscv: dts: allwinner: Add Bluetooth PCM audio
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ .../allwinner/sun20i-d1-clockworkpi-v3.14.dts | 47 +++++++++++++++++++
+ 1 file changed, 47 insertions(+)
+
+--- a/arch/riscv/boot/dts/allwinner/sun20i-d1-clockworkpi-v3.14.dts
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-clockworkpi-v3.14.dts
+@@ -22,6 +22,32 @@
+ stdout-path = "serial0:115200n8";
+ };
+
++ bt_sco_codec: bt-sco-codec {
++ #sound-dai-cells = <0>;
++ compatible = "linux,bt-sco";
++ };
++
++ bt-sound {
++ compatible = "simple-audio-card";
++ simple-audio-card,name = "Bluetooth";
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ simple-audio-card,dai-link@0 {
++ format = "dsp_a";
++ frame-master = <&bt_sound_cpu>;
++ bitclock-master = <&bt_sound_cpu>;
++
++ bt_sound_cpu: cpu {
++ sound-dai = <&i2s1>;
++ };
++
++ codec {
++ sound-dai = <&bt_sco_codec>;
++ };
++ };
++ };
++
+ /*
+ * This regulator is PWM-controlled, but the PWM controller is not
+ * yet supported, so fix the regulator to its default voltage.
+@@ -169,6 +195,12 @@
+ };
+ };
+
++&i2s1 {
++ pinctrl-0 = <&i2s1_clk_pins>, <&i2s1_din_pin>, <&i2s1_dout_pin>;
++ pinctrl-names = "default";
++ status = "okay";
++};
++
+ &mmc0 {
+ broken-cd;
+ bus-width = <4>;
+@@ -205,6 +237,21 @@
+
+ &pio {
+ vcc-pg-supply = <®_ldoa>;
++
++ i2s1_clk_pins: i2s1-clk-pins {
++ pins = "PG12", "PG13";
++ function = "i2s1";
++ };
++
++ i2s1_din_pin: i2s1-din-pin {
++ pins = "PG14";
++ function = "i2s1_din";
++ };
++
++ i2s1_dout_pin: i2s1-dout-pin {
++ pins = "PG15";
++ function = "i2s1_dout";
++ };
+ };
+
+ &uart0 {
--- /dev/null
+From 690b8d708e0193d50522f70359bcab62a2f99742 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sun, 14 Nov 2021 09:04:29 -0600
+Subject: [PATCH 037/117] dt-bindings: crypto: sun8i-ce: Add compatible for D1
+
+D1 has a crypto engine similar to the one in other Allwinner SoCs.
+Like H6, it has a separate MBUS clock gate.
+
+It also requires the internal RC oscillator to be enabled for the TRNG
+to return data. This is likely the case for earlier variants as well,
+but the clock drivers for earlier SoCs did not allow disabling the RC
+oscillator.
+
+Series-changes: 2
+ - Add TRNG clock
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ .../bindings/crypto/allwinner,sun8i-ce.yaml | 31 ++++++++++++++-----
+ 1 file changed, 23 insertions(+), 8 deletions(-)
+
+--- a/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml
++++ b/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml
+@@ -14,6 +14,7 @@ properties:
+ enum:
+ - allwinner,sun8i-h3-crypto
+ - allwinner,sun8i-r40-crypto
++ - allwinner,sun20i-d1-crypto
+ - allwinner,sun50i-a64-crypto
+ - allwinner,sun50i-h5-crypto
+ - allwinner,sun50i-h6-crypto
+@@ -29,6 +30,7 @@ properties:
+ - description: Bus clock
+ - description: Module clock
+ - description: MBus clock
++ - description: TRNG clock (RC oscillator)
+ minItems: 2
+
+ clock-names:
+@@ -36,6 +38,7 @@ properties:
+ - const: bus
+ - const: mod
+ - const: ram
++ - const: trng
+ minItems: 2
+
+ resets:
+@@ -44,19 +47,31 @@ properties:
+ if:
+ properties:
+ compatible:
+- const: allwinner,sun50i-h6-crypto
++ enum:
++ - allwinner,sun20i-d1-crypto
+ then:
+ properties:
+ clocks:
+- minItems: 3
++ minItems: 4
+ clock-names:
+- minItems: 3
++ minItems: 4
+ else:
+- properties:
+- clocks:
+- maxItems: 2
+- clock-names:
+- maxItems: 2
++ if:
++ properties:
++ compatible:
++ const: allwinner,sun50i-h6-crypto
++ then:
++ properties:
++ clocks:
++ minItems: 3
++ clock-names:
++ minItems: 3
++ else:
++ properties:
++ clocks:
++ maxItems: 2
++ clock-names:
++ maxItems: 2
+
+ required:
+ - compatible
--- /dev/null
+From d09357656ae3985095f562cf005fa94fd61ebfe6 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Tue, 1 Feb 2022 21:50:16 -0600
+Subject: [PATCH 038/117] crypto: sun8i-ce - Add TRNG clock to D1 variant
+
+At least the D1 variant requires a separate clock for the TRNG.
+Without this clock enabled, reading from /dev/hwrng reports:
+
+ sun8i-ce 3040000.crypto: DMA timeout for TRNG (tm=96) on flow 3
+
+Experimentation shows that the necessary clock is the SoC's internal
+RC oscillator. This makes sense, as the oscillator's frequency
+variations can be used as a source of randomness.
+
+Since D1 does not yet have a device tree, we can update this variant
+without breaking anything.
+
+Series-changes: 2
+ - New patch
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ drivers/crypto/allwinner/sun8i-ce/sun8i-ce-core.c | 1 +
+ drivers/crypto/allwinner/sun8i-ce/sun8i-ce.h | 2 +-
+ 2 files changed, 2 insertions(+), 1 deletion(-)
+
+--- a/drivers/crypto/allwinner/sun8i-ce/sun8i-ce-core.c
++++ b/drivers/crypto/allwinner/sun8i-ce/sun8i-ce-core.c
+@@ -118,6 +118,7 @@ static const struct ce_variant ce_d1_var
+ { "bus", 0, 200000000 },
+ { "mod", 300000000, 0 },
+ { "ram", 0, 400000000 },
++ { "trng", 0, 0 },
+ },
+ .esr = ESR_D1,
+ .prng = CE_ALG_PRNG,
+--- a/drivers/crypto/allwinner/sun8i-ce/sun8i-ce.h
++++ b/drivers/crypto/allwinner/sun8i-ce/sun8i-ce.h
+@@ -105,7 +105,7 @@
+
+ #define MAX_SG 8
+
+-#define CE_MAX_CLOCKS 3
++#define CE_MAX_CLOCKS 4
+
+ #define MAXFLOW 4
+
--- /dev/null
+From 5dae72bf0e0fabb3164dbc4b5eee310c63f1975c Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Thu, 11 Aug 2022 22:20:31 -0500
+Subject: [PATCH 039/117] riscv: dts: allwinner: d1: Add crypto engine support
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi | 12 ++++++++++++
+ 1 file changed, 12 insertions(+)
+
+--- a/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
+@@ -457,6 +457,18 @@
+ };
+ };
+
++ crypto: crypto@3040000 {
++ compatible = "allwinner,sun20i-d1-crypto";
++ reg = <0x3040000 0x800>;
++ interrupts = <68 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_CE>,
++ <&ccu CLK_CE>,
++ <&ccu CLK_MBUS_CE>,
++ <&rtc CLK_IOSC>;
++ clock-names = "bus", "mod", "ram", "trng";
++ resets = <&ccu RST_BUS_CE>;
++ };
++
+ mbus: dram-controller@3102000 {
+ compatible = "allwinner,sun20i-d1-mbus";
+ reg = <0x3102000 0x1000>,
--- /dev/null
+From 7a24e5ee94e0163801c8ab4c131ae1d530a420ea Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Wed, 17 Aug 2022 02:08:36 -0500
+Subject: [PATCH 040/117] ASoC: sun50i-dmic: dt-bindings: Add D1 compatible
+ string
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ .../bindings/sound/allwinner,sun50i-h6-dmic.yaml | 7 ++++++-
+ 1 file changed, 6 insertions(+), 1 deletion(-)
+
+--- a/Documentation/devicetree/bindings/sound/allwinner,sun50i-h6-dmic.yaml
++++ b/Documentation/devicetree/bindings/sound/allwinner,sun50i-h6-dmic.yaml
+@@ -11,7 +11,12 @@ maintainers:
+
+ properties:
+ compatible:
+- const: allwinner,sun50i-h6-dmic
++ oneOf:
++ - items:
++ - enum:
++ - allwinner,sun20i-d1-dmic
++ - const: allwinner,sun50i-h6-dmic
++ - const: allwinner,sun50i-h6-dmic
+
+ "#sound-dai-cells":
+ const: 0
--- /dev/null
+From d73f2176958e405e55c4e782c6d0f888e20080e5 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Wed, 17 Aug 2022 02:08:58 -0500
+Subject: [PATCH 041/117] riscv: dts: allwinner: d1: Add DMIC node
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi | 15 +++++++++++++++
+ 1 file changed, 15 insertions(+)
+
+--- a/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
+@@ -208,6 +208,21 @@
+ };
+ };
+
++ dmic: dmic@2031000 {
++ compatible = "allwinner,sun20i-d1-dmic",
++ "allwinner,sun50i-h6-dmic";
++ reg = <0x2031000 0x400>;
++ interrupts = <40 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_DMIC>,
++ <&ccu CLK_DMIC>;
++ clock-names = "bus", "mod";
++ resets = <&ccu RST_BUS_DMIC>;
++ dmas = <&dma 8>;
++ dma-names = "rx";
++ status = "disabled";
++ #sound-dai-cells = <0>;
++ };
++
+ i2s0: i2s@2032000 {
+ compatible = "allwinner,sun20i-d1-i2s",
+ "allwinner,sun50i-r329-i2s";
--- /dev/null
+From 500a3fc1ce1b216ef4f4df73e4e048170764189e Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Wed, 17 Aug 2022 02:20:49 -0500
+Subject: [PATCH 042/117] riscv: dts: allwinner: Add DMIC sound cards
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ .../sun20i-d1-lichee-rv-86-panel.dtsi | 43 ++++++++++++++++++
+ .../allwinner/sun20i-d1-lichee-rv-dock.dts | 45 +++++++++++++++++++
+ 2 files changed, 88 insertions(+)
+
+--- a/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel.dtsi
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel.dtsi
+@@ -9,6 +9,33 @@
+ ethernet1 = &xr829;
+ };
+
++ dmic_codec: dmic-codec {
++ compatible = "dmic-codec";
++ num-channels = <2>;
++ #sound-dai-cells = <0>;
++ };
++
++ dmic-sound {
++ compatible = "simple-audio-card";
++ simple-audio-card,name = "DMIC";
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ simple-audio-card,dai-link@0 {
++ format = "pdm";
++ frame-master = <&link0_cpu>;
++ bitclock-master = <&link0_cpu>;
++
++ link0_cpu: cpu {
++ sound-dai = <&dmic>;
++ };
++
++ link0_codec: codec {
++ sound-dai = <&dmic_codec>;
++ };
++ };
++ };
++
+ /* PC1 is repurposed as BT_WAKE_AP */
+ /delete-node/ leds;
+
+@@ -24,6 +51,12 @@
+ };
+ };
+
++&dmic {
++ pinctrl-0 = <&dmic_pb11_d0_pin>, <&dmic_pe17_clk_pin>;
++ pinctrl-names = "default";
++ status = "okay";
++};
++
+ &ehci1 {
+ status = "okay";
+ };
+@@ -69,6 +102,16 @@
+ pins = "PG11";
+ function = "clk";
+ };
++
++ dmic_pb11_d0_pin: dmic-pb11-d0-pin {
++ pins = "PB11";
++ function = "dmic";
++ };
++
++ dmic_pe17_clk_pin: dmic-pe17-clk-pin {
++ pins = "PE17";
++ function = "dmic";
++ };
+ };
+
+ &uart1 {
+--- a/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dts
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dts
+@@ -15,12 +15,45 @@
+ ethernet1 = &rtl8723ds;
+ };
+
++ dmic_codec: dmic-codec {
++ compatible = "dmic-codec";
++ num-channels = <2>;
++ #sound-dai-cells = <0>;
++ };
++
++ dmic-sound {
++ compatible = "simple-audio-card";
++ simple-audio-card,name = "DMIC";
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ simple-audio-card,dai-link@0 {
++ format = "pdm";
++ frame-master = <&link0_cpu>;
++ bitclock-master = <&link0_cpu>;
++
++ link0_cpu: cpu {
++ sound-dai = <&dmic>;
++ };
++
++ link0_codec: codec {
++ sound-dai = <&dmic_codec>;
++ };
++ };
++ };
++
+ wifi_pwrseq: wifi-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&pio 6 12 GPIO_ACTIVE_LOW>; /* PG12 */
+ };
+ };
+
++&dmic {
++ pinctrl-0 = <&dmic_pb11_d0_pin>, <&dmic_pe17_clk_pin>;
++ pinctrl-names = "default";
++ status = "okay";
++};
++
+ &ehci1 {
+ status = "okay";
+ };
+@@ -55,6 +88,18 @@
+ status = "okay";
+ };
+
++&pio {
++ dmic_pb11_d0_pin: dmic-pb11-d0-pin {
++ pins = "PB11";
++ function = "dmic";
++ };
++
++ dmic_pe17_clk_pin: dmic-pe17-clk-pin {
++ pins = "PE17";
++ function = "dmic";
++ };
++};
++
+ &uart1 {
+ uart-has-rtscts;
+ pinctrl-0 = <&uart1_pg6_pins>, <&uart1_pg8_rts_cts_pins>;
--- /dev/null
+From 7708f7471ab45039e08237b42121d0372f9216a7 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sun, 13 Jun 2021 23:42:19 -0500
+Subject: [PATCH 043/117] hwspinlock: sun6i: Clarify bank counting logic
+
+In some of the most recent datasheets, the register definition was
+updated in a way that resolves the conflict here: the field is only two
+bits wide, and a value of "4" really means a bit pattern of "0". Correct
+the code to reflect this, but leave an updated comment because some
+datasheets still have incorrect information in them.
+
+Fixes: 3c881e05c814 ("hwspinlock: add sun6i hardware spinlock support")
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ drivers/hwspinlock/sun6i_hwspinlock.c | 36 +++++++++++----------------
+ 1 file changed, 14 insertions(+), 22 deletions(-)
+
+--- a/drivers/hwspinlock/sun6i_hwspinlock.c
++++ b/drivers/hwspinlock/sun6i_hwspinlock.c
+@@ -129,30 +129,22 @@ static int sun6i_hwspinlock_probe(struct
+ }
+
+ /*
+- * bit 28 and 29 represents the hwspinlock setup
++ * Bits 28 and 29 represent the number of available locks.
+ *
+- * every datasheet (A64, A80, A83T, H3, H5, H6 ...) says the default value is 0x1 and 0x1
+- * to 0x4 represent 32, 64, 128 and 256 locks
+- * but later datasheets (H5, H6) say 00, 01, 10, 11 represent 32, 64, 128 and 256 locks,
+- * but that would mean H5 and H6 have 64 locks, while their datasheets talk about 32 locks
+- * all the time, not a single mentioning of 64 locks
+- * the 0x4 value is also not representable by 2 bits alone, so some datasheets are not
+- * correct
+- * one thing have all in common, default value of the sysstatus register is 0x10000000,
+- * which results in bit 28 being set
+- * this is the reason 0x1 is considered being 32 locks and bit 30 is taken into account
+- * verified on H2+ (datasheet 0x1 = 32 locks) and H5 (datasheet 01 = 64 locks)
++ * The datasheets have two conflicting interpretations for these bits:
++ * | 00 | 01 | 10 | 11 |
++ * +-----+----+-----+-----+
++ * | 256 | 32 | 64 | 128 | A80, A83T, H3, A64, A50, D1
++ * | 32 | 64 | 128 | 256 | H5, H6, R329
++ * where some datasheets use "4" instead of "0" for the first column.
++ *
++ * Experiments shows that the first interpretation is correct, as all
++ * known implementations report the value "1" and have 32 spinlocks.
+ */
+- num_banks = readl(io_base + SPINLOCK_SYSSTATUS_REG) >> 28;
+- switch (num_banks) {
+- case 1 ... 4:
+- priv->nlocks = 1 << (4 + num_banks);
+- break;
+- default:
+- err = -EINVAL;
+- dev_err(&pdev->dev, "unsupported hwspinlock setup (%d)\n", num_banks);
+- goto bank_fail;
+- }
++ num_banks = readl(io_base + SPINLOCK_SYSSTATUS_REG) >> 28 & 0x3;
++ if (!num_banks)
++ num_banks = 4;
++ priv->nlocks = 1 << (4 + num_banks);
+
+ priv->bank = devm_kzalloc(&pdev->dev, struct_size(priv->bank, lock, priv->nlocks),
+ GFP_KERNEL);
--- /dev/null
+From a19b55088945ce86051ea4eab22df27805a30c71 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sun, 13 Jun 2021 23:41:44 -0500
+Subject: [PATCH 044/117] hwspinlock: sun6i: Fix driver to match binding
+
+The binding for this device does not allow using the clock-names and
+reset-names properties, so the driver should not reference the clock or
+reset by name.
+
+Fixes: 3c881e05c814 ("hwspinlock: add sun6i hardware spinlock support")
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ drivers/hwspinlock/sun6i_hwspinlock.c | 12 +++++-------
+ 1 file changed, 5 insertions(+), 7 deletions(-)
+
+--- a/drivers/hwspinlock/sun6i_hwspinlock.c
++++ b/drivers/hwspinlock/sun6i_hwspinlock.c
+@@ -104,14 +104,12 @@ static int sun6i_hwspinlock_probe(struct
+ if (!priv)
+ return -ENOMEM;
+
+- priv->ahb_clk = devm_clk_get(&pdev->dev, "ahb");
+- if (IS_ERR(priv->ahb_clk)) {
+- err = PTR_ERR(priv->ahb_clk);
+- dev_err(&pdev->dev, "unable to get AHB clock (%d)\n", err);
+- return err;
+- }
++ priv->ahb_clk = devm_clk_get(&pdev->dev, NULL);
++ if (IS_ERR(priv->ahb_clk))
++ return dev_err_probe(&pdev->dev, PTR_ERR(priv->ahb_clk),
++ "unable to get AHB clock\n");
+
+- priv->reset = devm_reset_control_get(&pdev->dev, "ahb");
++ priv->reset = devm_reset_control_get(&pdev->dev, NULL);
+ if (IS_ERR(priv->reset))
+ return dev_err_probe(&pdev->dev, PTR_ERR(priv->reset),
+ "unable to get reset control\n");
--- /dev/null
+From f0c29c5d370507ca2106689e7e17b81e8b58f236 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sun, 14 Nov 2021 11:37:34 -0600
+Subject: [PATCH 045/117] dt-bindings: hwlock: sun6i: Add interrupts property
+
+While it was not officially documented until recently (e.g. A50), the
+hwspinlock block can trigger an interrupt when a lock is unlocked. This
+capability is used by Allwinner's ARISC firmware, it has been verified
+to work on A64, and the IRQ numbers are reserved as far back as A31.
+So most likely this feature has always been available.
+
+Even though the Linux hwspinlock framework cannot make use of the IRQ,
+the capability should still be documented in the device tree.
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ .../bindings/hwlock/allwinner,sun6i-a31-hwspinlock.yaml | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+--- a/Documentation/devicetree/bindings/hwlock/allwinner,sun6i-a31-hwspinlock.yaml
++++ b/Documentation/devicetree/bindings/hwlock/allwinner,sun6i-a31-hwspinlock.yaml
+@@ -26,17 +26,22 @@ properties:
+ resets:
+ maxItems: 1
+
++ interrupts:
++ maxItems: 1
++
+ required:
+ - compatible
+ - reg
+ - clocks
+ - resets
++ - interrupts
+
+ additionalProperties: false
+
+ examples:
+ - |
+ #include <dt-bindings/clock/sun8i-a23-a33-ccu.h>
++ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/reset/sun8i-a23-a33-ccu.h>
+
+ hwlock@1c18000 {
+@@ -44,5 +49,6 @@ examples:
+ reg = <0x01c18000 0x1000>;
+ clocks = <&ccu CLK_BUS_SPINLOCK>;
+ resets = <&ccu RST_BUS_SPINLOCK>;
++ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ ...
--- /dev/null
+From e7b8c42c6bf02f4c2e24b015a12cd9edad094644 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sun, 14 Nov 2021 12:36:52 -0600
+Subject: [PATCH 046/117] dt-bindings: hwlock: sun6i: Add per-SoC compatibles
+
+While all implementations of this hardware appear to be indentical, it
+is possible that some difference exists. To be safe, add a compatible
+for each SoC integration, using the A31 compatible only as a fallback.
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ .../hwlock/allwinner,sun6i-a31-hwspinlock.yaml | 16 +++++++++++++++-
+ 1 file changed, 15 insertions(+), 1 deletion(-)
+
+--- a/Documentation/devicetree/bindings/hwlock/allwinner,sun6i-a31-hwspinlock.yaml
++++ b/Documentation/devicetree/bindings/hwlock/allwinner,sun6i-a31-hwspinlock.yaml
+@@ -15,7 +15,21 @@ description:
+
+ properties:
+ compatible:
+- const: allwinner,sun6i-a31-hwspinlock
++ oneOf:
++ - items:
++ - enum:
++ - allwinner,sun8i-a23-hwspinlock
++ - allwinner,sun8i-a33-hwspinlock
++ - allwinner,sun8i-a50-hwspinlock
++ - allwinner,sun8i-a83t-hwspinlock
++ - allwinner,sun8i-h3-hwspinlock
++ - allwinner,sun9i-a80-hwspinlock
++ - allwinner,sun20i-d1-hwspinlock
++ - allwinner,sun50i-a64-hwspinlock
++ - allwinner,sun50i-h6-hwspinlock
++ - allwinner,sun50i-r329-hwspinlock
++ - const: allwinner,sun6i-a31-hwspinlock
++ - const: allwinner,sun6i-a31-hwspinlock
+
+ reg:
+ maxItems: 1
--- /dev/null
+From 419b337ac3e60126f9de0bc98892e54a8ffe3b6e Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sun, 13 Jun 2021 23:50:57 -0500
+Subject: [PATCH 047/117] ASoC: sun4i-i2s: Also set capture DMA width
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ sound/soc/sunxi/sun4i-i2s.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/sound/soc/sunxi/sun4i-i2s.c
++++ b/sound/soc/sunxi/sun4i-i2s.c
+@@ -633,6 +633,7 @@ static int sun4i_i2s_hw_params(struct sn
+ params_physical_width(params));
+ return -EINVAL;
+ }
++ i2s->capture_dma_data.addr_width = width;
+ i2s->playback_dma_data.addr_width = width;
+
+ sr = i2s->variant->get_sr(word_size);
--- /dev/null
+From dbad9a1f280b3c3e34cc133407ae057293b8aadf Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Wed, 17 Aug 2022 02:34:08 -0500
+Subject: [PATCH 048/117] todo
+
+---
+ arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
+@@ -253,6 +253,7 @@
+ #sound-dai-cells = <0>;
+ };
+
++ // TODO: how to integrate ASRC? same or separate node?
+ i2s2: i2s@2034000 {
+ compatible = "allwinner,sun20i-d1-i2s",
+ "allwinner,sun50i-r329-i2s";
--- /dev/null
+From 031deed1d755fc9f1e4908ef70969e1458203421 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sun, 6 Jun 2021 10:20:38 -0500
+Subject: [PATCH 049/117] dt-bindings: iommu: sun50i: Add compatible for
+ Allwinner D1
+
+D1 contains an IOMMU similar to the one in the H6 SoC, but the D1
+variant has no external reset signal.
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ .../iommu/allwinner,sun50i-h6-iommu.yaml | 16 ++++++++++++++--
+ 1 file changed, 14 insertions(+), 2 deletions(-)
+
+--- a/Documentation/devicetree/bindings/iommu/allwinner,sun50i-h6-iommu.yaml
++++ b/Documentation/devicetree/bindings/iommu/allwinner,sun50i-h6-iommu.yaml
+@@ -17,7 +17,9 @@ properties:
+ The content of the cell is the master ID.
+
+ compatible:
+- const: allwinner,sun50i-h6-iommu
++ enum:
++ - allwinner,sun20i-d1-iommu
++ - allwinner,sun50i-h6-iommu
+
+ reg:
+ maxItems: 1
+@@ -37,7 +39,17 @@ required:
+ - reg
+ - interrupts
+ - clocks
+- - resets
++
++if:
++ properties:
++ compatible:
++ contains:
++ enum:
++ - allwinner,sun50i-h6-iommu
++
++then:
++ required:
++ - resets
+
+ additionalProperties: false
+
--- /dev/null
+From 15a0487680cf506bb4b9bfee2c41b2c3176d4efa Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Wed, 27 Apr 2022 19:01:57 -0500
+Subject: [PATCH 050/117] iommu/sun50i: Support variants without an external
+ reset
+
+The IOMMU in the Allwinner D1 SoC does not have an external reset line.
+
+Only attempt to get the reset on hardware variants which should have one
+according to the binding. And switch from the deprecated function to the
+explicit "exclusive" variant.
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ drivers/iommu/sun50i-iommu.c | 18 ++++++++++++++++--
+ 1 file changed, 16 insertions(+), 2 deletions(-)
+
+--- a/drivers/iommu/sun50i-iommu.c
++++ b/drivers/iommu/sun50i-iommu.c
+@@ -95,6 +95,10 @@
+
+ #define SPAGE_SIZE 4096
+
++struct sun50i_iommu_variant {
++ bool has_reset;
++};
++
+ struct sun50i_iommu {
+ struct iommu_device iommu;
+
+@@ -979,9 +983,14 @@ static irqreturn_t sun50i_iommu_irq(int
+
+ static int sun50i_iommu_probe(struct platform_device *pdev)
+ {
++ const struct sun50i_iommu_variant *variant;
+ struct sun50i_iommu *iommu;
+ int ret, irq;
+
++ variant = of_device_get_match_data(&pdev->dev);
++ if (!variant)
++ return -EINVAL;
++
+ iommu = devm_kzalloc(&pdev->dev, sizeof(*iommu), GFP_KERNEL);
+ if (!iommu)
+ return -ENOMEM;
+@@ -1021,7 +1030,8 @@ static int sun50i_iommu_probe(struct pla
+ goto err_free_group;
+ }
+
+- iommu->reset = devm_reset_control_get(&pdev->dev, NULL);
++ if (variant->has_reset)
++ iommu->reset = devm_reset_control_get_exclusive(&pdev->dev, NULL);
+ if (IS_ERR(iommu->reset)) {
+ dev_err(&pdev->dev, "Couldn't get our reset line.\n");
+ ret = PTR_ERR(iommu->reset);
+@@ -1059,8 +1069,12 @@ err_free_cache:
+ return ret;
+ }
+
++static const struct sun50i_iommu_variant sun50i_h6_iommu = {
++ .has_reset = true,
++};
++
+ static const struct of_device_id sun50i_iommu_dt[] = {
+- { .compatible = "allwinner,sun50i-h6-iommu", },
++ { .compatible = "allwinner,sun50i-h6-iommu", .data = &sun50i_h6_iommu },
+ { /* sentinel */ },
+ };
+ MODULE_DEVICE_TABLE(of, sun50i_iommu_dt);
--- /dev/null
+From 384e2ca3c049fe36f4e679fc76fcc8dfdc9297f9 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Wed, 27 Apr 2022 19:06:28 -0500
+Subject: [PATCH 051/117] iommu/sun50i: Ensure bypass is disabled
+
+The H6 variant of the hardware disables bypass by default. The D1
+variant of the hardware enables bypass for all masters by default.
+
+Since the driver expects bypass to be disabled, ensure that is the case.
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ drivers/iommu/sun50i-iommu.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/drivers/iommu/sun50i-iommu.c
++++ b/drivers/iommu/sun50i-iommu.c
+@@ -445,6 +445,8 @@ static int sun50i_iommu_enable(struct su
+
+ spin_lock_irqsave(&iommu->iommu_lock, flags);
+
++ iommu_write(iommu, IOMMU_BYPASS_REG, 0);
++
+ iommu_write(iommu, IOMMU_TTB_REG, sun50i_domain->dt_dma);
+ iommu_write(iommu, IOMMU_TLB_PREFETCH_REG,
+ IOMMU_TLB_PREFETCH_MASTER_ENABLE(0) |
--- /dev/null
+From 5fdd5231c56d58f16a6cefa2bed4b8f331da2c92 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Wed, 27 Apr 2022 19:20:58 -0500
+Subject: [PATCH 052/117] iommu/sun50i: Add support for the D1 variant
+
+D1 contains an IOMMU similar to the one in the H6 SoC, but the D1
+variant has no external reset signal. It also has some register
+definition changes, but none that affect the current driver.
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ drivers/iommu/sun50i-iommu.c | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/drivers/iommu/sun50i-iommu.c
++++ b/drivers/iommu/sun50i-iommu.c
+@@ -1071,11 +1071,15 @@ err_free_cache:
+ return ret;
+ }
+
++static const struct sun50i_iommu_variant sun20i_d1_iommu = {
++};
++
+ static const struct sun50i_iommu_variant sun50i_h6_iommu = {
+ .has_reset = true,
+ };
+
+ static const struct of_device_id sun50i_iommu_dt[] = {
++ { .compatible = "allwinner,sun20i-d1-iommu", .data = &sun20i_d1_iommu },
+ { .compatible = "allwinner,sun50i-h6-iommu", .data = &sun50i_h6_iommu },
+ { /* sentinel */ },
+ };
--- /dev/null
+From 4c37ac95ee354857c8c662b6b7b4bc50eea23206 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sun, 14 Aug 2022 11:20:37 -0500
+Subject: [PATCH 053/117] riscv: dts: allwinner: d1: Add IOMMU node
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi | 10 ++++++++++
+ 1 file changed, 10 insertions(+)
+
+--- a/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
+@@ -188,6 +188,14 @@
+ status = "disabled";
+ };
+
++ iommu: iommu@2010000 {
++ compatible = "allwinner,sun20i-d1-iommu";
++ reg = <0x2010000 0x10000>;
++ interrupts = <80 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_IOMMU>;
++ #iommu-cells = <1>;
++ };
++
+ codec: audio-codec@2030000 {
+ compatible = "simple-mfd", "syscon";
+ reg = <0x2030000 0x1000>;
+@@ -681,6 +689,7 @@
+ <&display_clocks CLK_MIXER0>;
+ clock-names = "bus", "mod";
+ resets = <&display_clocks RST_MIXER0>;
++ iommus = <&iommu 2>;
+
+ ports {
+ #address-cells = <1>;
+@@ -703,6 +712,7 @@
+ <&display_clocks CLK_MIXER1>;
+ clock-names = "bus", "mod";
+ resets = <&display_clocks RST_MIXER1>;
++ iommus = <&iommu 2>;
+
+ ports {
+ #address-cells = <1>;
--- /dev/null
+From 31857adcc9db7244a047a3a3550219f7559d8846 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Wed, 4 Aug 2021 21:36:26 -0500
+Subject: [PATCH 054/117] dt-bindings: leds: Add Allwinner A100 LED controller
+
+The Allwinner A100, R329, and D1 SoCs contain an LED controller designed
+to drive a series of RGB LED pixels. It supports PIO and DMA transfers,
+and has configurable timing and pixel format. All three implementations
+appear to be identical, so use the oldest as the fallback compatible.
+
+Series-changes: 2
+ - Fixed typo leading to duplicate t1h-ns property
+ - Removed "items" layer in definition of dmas/dma-names
+ - Replaced uint32 type reference with maxItems in timing properties
+
+Series-changes: 3
+ - Removed quotes from enumeration values
+ - Added vendor prefix to timing/format properties
+ - Renamed "format" property to "pixel-format" for clarity
+ - Dropped "vled-supply" as it is unrelated to the controller hardware
+
+Series-changes: 4
+ - Use "default" instead of "maxItems" for timing properties
+
+Series-changes: 5
+ - A100 contains the original implementation, so use that as the base
+ compatible string, and rename the binding to match
+ - Add "unevaluatedProperties: false" to the child multi-led binding
+
+Acked-by: Maxime Ripard <maxime@cerno.tech>
+Reviewed-by: Rob Herring <robh@kernel.org>
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ .../leds/allwinner,sun50i-a100-ledc.yaml | 139 ++++++++++++++++++
+ 1 file changed, 139 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/leds/allwinner,sun50i-a100-ledc.yaml
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/leds/allwinner,sun50i-a100-ledc.yaml
+@@ -0,0 +1,139 @@
++# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
++%YAML 1.2
++---
++$id: http://devicetree.org/schemas/leds/allwinner,sun50i-a100-ledc.yaml#
++$schema: http://devicetree.org/meta-schemas/core.yaml#
++
++title: Allwinner A100 LED Controller Bindings
++
++maintainers:
++ - Samuel Holland <samuel@sholland.org>
++
++description:
++ The LED controller found in Allwinner sunxi SoCs uses a one-wire serial
++ interface to drive up to 1024 RGB LEDs.
++
++properties:
++ compatible:
++ oneOf:
++ - const: allwinner,sun50i-a100-ledc
++ - items:
++ - enum:
++ - allwinner,sun20i-d1-ledc
++ - allwinner,sun50i-r329-ledc
++ - const: allwinner,sun50i-a100-ledc
++
++ reg:
++ maxItems: 1
++
++ "#address-cells":
++ const: 1
++
++ "#size-cells":
++ const: 0
++
++ interrupts:
++ maxItems: 1
++
++ clocks:
++ items:
++ - description: Bus clock
++ - description: Module clock
++
++ clock-names:
++ items:
++ - const: bus
++ - const: mod
++
++ resets:
++ maxItems: 1
++
++ dmas:
++ maxItems: 1
++ description: TX DMA channel
++
++ dma-names:
++ const: tx
++
++ allwinner,pixel-format:
++ description: Pixel format (subpixel transmission order), default is "grb"
++ enum:
++ - bgr
++ - brg
++ - gbr
++ - grb
++ - rbg
++ - rgb
++
++ allwinner,t0h-ns:
++ default: 336
++ description: Length of high pulse when transmitting a "0" bit
++
++ allwinner,t0l-ns:
++ default: 840
++ description: Length of low pulse when transmitting a "0" bit
++
++ allwinner,t1h-ns:
++ default: 882
++ description: Length of high pulse when transmitting a "1" bit
++
++ allwinner,t1l-ns:
++ default: 294
++ description: Length of low pulse when transmitting a "1" bit
++
++ allwinner,treset-ns:
++ default: 300000
++ description: Minimum delay between transmission frames
++
++patternProperties:
++ "^multi-led@[0-9a-f]+$":
++ type: object
++ $ref: leds-class-multicolor.yaml#
++ unevaluatedProperties: false
++ properties:
++ reg:
++ minimum: 0
++ maximum: 1023
++ description: Index of the LED in the series (must be contiguous)
++
++ required:
++ - reg
++
++required:
++ - compatible
++ - reg
++ - interrupts
++ - clocks
++ - clock-names
++ - resets
++ - dmas
++ - dma-names
++
++additionalProperties: false
++
++examples:
++ - |
++ #include <dt-bindings/interrupt-controller/irq.h>
++ #include <dt-bindings/leds/common.h>
++
++ ledc: led-controller@2008000 {
++ compatible = "allwinner,sun20i-d1-ledc",
++ "allwinner,sun50i-a100-ledc";
++ reg = <0x2008000 0x400>;
++ interrupts = <36 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu 12>, <&ccu 34>;
++ clock-names = "bus", "mod";
++ resets = <&ccu 12>;
++ dmas = <&dma 42>;
++ dma-names = "tx";
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ multi-led@0 {
++ reg = <0x0>;
++ color = <LED_COLOR_ID_RGB>;
++ function = LED_FUNCTION_INDICATOR;
++ };
++ };
++
++...
--- /dev/null
+From 352b296d30df06b880d2c7620910cd759dc2609d Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sat, 26 Jun 2021 11:02:49 -0500
+Subject: [PATCH 055/117] leds: sun50i-a100: New driver for the A100 LED
+ controller
+
+Some Allwinner sunxi SoCs, starting with the A100, contain an LED
+controller designed to drive RGB LED pixels. Add a driver for it using
+the multicolor LED framework, and with LEDs defined in the device tree.
+
+Series-changes: 2
+ - Renamed from sunxi-ledc to sun50i-r329-ledc
+ - Added missing "static" to functions/globals as reported by 0day bot
+
+Series-changes: 3
+ - Added vendor prefix to timing/format properties
+ - Renamed "format" property to "pixel-format" for clarity
+ - Dropped "vled-supply" as it is unrelated to the controller hardware
+ - Changed "writesl" to "iowrite32_rep" so the driver builds on hppa
+
+Series-changes: 4
+ - Depend on LEDS_CLASS_MULTICOLOR
+
+Series-changes: 5
+ - Rename the driver R329 -> A100, since that is the actual original
+ implementation
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ drivers/leds/Kconfig | 9 +
+ drivers/leds/Makefile | 1 +
+ drivers/leds/leds-sun50i-a100.c | 554 ++++++++++++++++++++++++++++++++
+ 3 files changed, 564 insertions(+)
+ create mode 100644 drivers/leds/leds-sun50i-a100.c
+
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -283,6 +283,15 @@ config LEDS_COBALT_RAQ
+ help
+ This option enables support for the Cobalt Raq series LEDs.
+
++config LEDS_SUN50I_A100
++ tristate "LED support for Allwinner A100 RGB LED controller"
++ depends on LEDS_CLASS_MULTICOLOR && OF
++ depends on ARCH_SUNXI || COMPILE_TEST
++ help
++ This option enables support for the RGB LED controller found
++ in some Allwinner sunxi SoCs, includeing A100, R329, and D1.
++ It uses a one-wire interface to control up to 1024 LEDs.
++
+ config LEDS_SUNFIRE
+ tristate "LED support for SunFire servers."
+ depends on LEDS_CLASS
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -76,6 +76,7 @@ obj-$(CONFIG_LEDS_PWM) += leds-pwm.o
+ obj-$(CONFIG_LEDS_REGULATOR) += leds-regulator.o
+ obj-$(CONFIG_LEDS_S3C24XX) += leds-s3c24xx.o
+ obj-$(CONFIG_LEDS_SC27XX_BLTC) += leds-sc27xx-bltc.o
++obj-$(CONFIG_LEDS_SUN50I_A100) += leds-sun50i-a100.o
+ obj-$(CONFIG_LEDS_SUNFIRE) += leds-sunfire.o
+ obj-$(CONFIG_LEDS_SYSCON) += leds-syscon.o
+ obj-$(CONFIG_LEDS_TCA6507) += leds-tca6507.o
+--- /dev/null
++++ b/drivers/leds/leds-sun50i-a100.c
+@@ -0,0 +1,554 @@
++// SPDX-License-Identifier: GPL-2.0
++//
++// Copyright (c) 2021-2022 Samuel Holland <samuel@sholland.org>
++//
++// Partly based on drivers/leds/leds-turris-omnia.c, which is:
++// Copyright (c) 2020 by Marek Behún <kabel@kernel.org>
++//
++
++#include <linux/clk.h>
++#include <linux/dma-mapping.h>
++#include <linux/dmaengine.h>
++#include <linux/interrupt.h>
++#include <linux/io.h>
++#include <linux/led-class-multicolor.h>
++#include <linux/leds.h>
++#include <linux/module.h>
++#include <linux/of.h>
++#include <linux/platform_device.h>
++#include <linux/pm.h>
++#include <linux/reset.h>
++#include <linux/spinlock.h>
++
++#define LEDC_CTRL_REG 0x0000
++#define LEDC_CTRL_REG_DATA_LENGTH (0x1fff << 16)
++#define LEDC_CTRL_REG_RGB_MODE (0x7 << 6)
++#define LEDC_CTRL_REG_LEDC_EN BIT(0)
++#define LEDC_T01_TIMING_CTRL_REG 0x0004
++#define LEDC_T01_TIMING_CTRL_REG_T1H (0x3f << 21)
++#define LEDC_T01_TIMING_CTRL_REG_T1L (0x1f << 16)
++#define LEDC_T01_TIMING_CTRL_REG_T0H (0x1f << 6)
++#define LEDC_T01_TIMING_CTRL_REG_T0L (0x3f << 0)
++#define LEDC_RESET_TIMING_CTRL_REG 0x000c
++#define LEDC_RESET_TIMING_CTRL_REG_LED_NUM (0x3ff << 0)
++#define LEDC_DATA_REG 0x0014
++#define LEDC_DMA_CTRL_REG 0x0018
++#define LEDC_DMA_CTRL_REG_FIFO_TRIG_LEVEL (0x1f << 0)
++#define LEDC_INT_CTRL_REG 0x001c
++#define LEDC_INT_CTRL_REG_GLOBAL_INT_EN BIT(5)
++#define LEDC_INT_CTRL_REG_FIFO_CPUREQ_INT_EN BIT(1)
++#define LEDC_INT_CTRL_REG_TRANS_FINISH_INT_EN BIT(0)
++#define LEDC_INT_STS_REG 0x0020
++#define LEDC_INT_STS_REG_FIFO_CPUREQ_INT BIT(1)
++#define LEDC_INT_STS_REG_TRANS_FINISH_INT BIT(0)
++
++#define LEDC_FIFO_DEPTH 32
++#define LEDC_MAX_LEDS 1024
++
++#define LEDS_TO_BYTES(n) ((n) * sizeof(u32))
++
++struct sun50i_a100_ledc_led {
++ struct led_classdev_mc mc_cdev;
++ struct mc_subled subled_info[3];
++};
++
++#define to_ledc_led(mc) container_of(mc, struct sun50i_a100_ledc_led, mc_cdev)
++
++struct sun50i_a100_ledc_timing {
++ u32 t0h_ns;
++ u32 t0l_ns;
++ u32 t1h_ns;
++ u32 t1l_ns;
++ u32 treset_ns;
++};
++
++struct sun50i_a100_ledc {
++ struct device *dev;
++ void __iomem *base;
++ struct clk *bus_clk;
++ struct clk *mod_clk;
++ struct reset_control *reset;
++
++ u32 *buffer;
++ struct dma_chan *dma_chan;
++ dma_addr_t dma_handle;
++ int pio_length;
++ int pio_offset;
++
++ spinlock_t lock;
++ int next_length;
++ bool xfer_active;
++
++ u32 format;
++ struct sun50i_a100_ledc_timing timing;
++
++ int num_leds;
++ struct sun50i_a100_ledc_led leds[];
++};
++
++static int sun50i_a100_ledc_dma_xfer(struct sun50i_a100_ledc *priv, int length)
++{
++ struct dma_async_tx_descriptor *desc;
++ dma_cookie_t cookie;
++
++ desc = dmaengine_prep_slave_single(priv->dma_chan, priv->dma_handle,
++ LEDS_TO_BYTES(length),
++ DMA_MEM_TO_DEV, 0);
++ if (!desc)
++ return -ENOMEM;
++
++ cookie = dmaengine_submit(desc);
++ if (dma_submit_error(cookie))
++ return -EIO;
++
++ dma_async_issue_pending(priv->dma_chan);
++
++ return 0;
++}
++
++static void sun50i_a100_ledc_pio_xfer(struct sun50i_a100_ledc *priv, int length)
++{
++ u32 burst, offset, val;
++
++ if (length) {
++ /* New transfer (FIFO is empty). */
++ offset = 0;
++ burst = min(length, LEDC_FIFO_DEPTH);
++ } else {
++ /* Existing transfer (FIFO is half-full). */
++ length = priv->pio_length;
++ offset = priv->pio_offset;
++ burst = min(length, LEDC_FIFO_DEPTH / 2);
++ }
++
++ iowrite32_rep(priv->base + LEDC_DATA_REG, priv->buffer + offset, burst);
++
++ if (burst < length) {
++ priv->pio_length = length - burst;
++ priv->pio_offset = offset + burst;
++
++ if (!offset) {
++ val = readl(priv->base + LEDC_INT_CTRL_REG);
++ val |= LEDC_INT_CTRL_REG_FIFO_CPUREQ_INT_EN;
++ writel(val, priv->base + LEDC_INT_CTRL_REG);
++ }
++ } else {
++ /* Disable the request IRQ once all data is written. */
++ val = readl(priv->base + LEDC_INT_CTRL_REG);
++ val &= ~LEDC_INT_CTRL_REG_FIFO_CPUREQ_INT_EN;
++ writel(val, priv->base + LEDC_INT_CTRL_REG);
++ }
++}
++
++static void sun50i_a100_ledc_start_xfer(struct sun50i_a100_ledc *priv,
++ int length)
++{
++ u32 val;
++
++ dev_dbg(priv->dev, "Updating %d LEDs\n", length);
++
++ val = readl(priv->base + LEDC_CTRL_REG);
++ val &= ~LEDC_CTRL_REG_DATA_LENGTH;
++ val |= length << 16 | LEDC_CTRL_REG_LEDC_EN;
++ writel(val, priv->base + LEDC_CTRL_REG);
++
++ if (length > LEDC_FIFO_DEPTH) {
++ int ret = sun50i_a100_ledc_dma_xfer(priv, length);
++
++ if (!ret)
++ return;
++
++ dev_warn(priv->dev, "Failed to set up DMA: %d\n", ret);
++ }
++
++ sun50i_a100_ledc_pio_xfer(priv, length);
++}
++
++static irqreturn_t sun50i_a100_ledc_irq(int irq, void *dev_id)
++{
++ struct sun50i_a100_ledc *priv = dev_id;
++ u32 val;
++
++ val = readl(priv->base + LEDC_INT_STS_REG);
++
++ if (val & LEDC_INT_STS_REG_TRANS_FINISH_INT) {
++ int next_length;
++
++ /* Start the next transfer if needed. */
++ spin_lock(&priv->lock);
++ next_length = priv->next_length;
++ if (next_length)
++ priv->next_length = 0;
++ else
++ priv->xfer_active = false;
++ spin_unlock(&priv->lock);
++
++ if (next_length)
++ sun50i_a100_ledc_start_xfer(priv, next_length);
++ } else if (val & LEDC_INT_STS_REG_FIFO_CPUREQ_INT) {
++ /* Continue the current transfer. */
++ sun50i_a100_ledc_pio_xfer(priv, 0);
++ }
++
++ writel(val, priv->base + LEDC_INT_STS_REG);
++
++ return IRQ_HANDLED;
++}
++
++static void sun50i_a100_ledc_brightness_set(struct led_classdev *cdev,
++ enum led_brightness brightness)
++{
++ struct sun50i_a100_ledc *priv = dev_get_drvdata(cdev->dev->parent);
++ struct led_classdev_mc *mc_cdev = lcdev_to_mccdev(cdev);
++ struct sun50i_a100_ledc_led *led = to_ledc_led(mc_cdev);
++ int addr = led - priv->leds;
++ unsigned long flags;
++ bool xfer_active;
++ int next_length;
++
++ led_mc_calc_color_components(mc_cdev, brightness);
++
++ priv->buffer[addr] = led->subled_info[0].brightness << 16 |
++ led->subled_info[1].brightness << 8 |
++ led->subled_info[2].brightness;
++
++ dev_dbg(priv->dev, "LED %d -> #%06x\n", addr, priv->buffer[addr]);
++
++ spin_lock_irqsave(&priv->lock, flags);
++ next_length = max(priv->next_length, addr + 1);
++ xfer_active = priv->xfer_active;
++ if (xfer_active)
++ priv->next_length = next_length;
++ else
++ priv->xfer_active = true;
++ spin_unlock_irqrestore(&priv->lock, flags);
++
++ if (!xfer_active)
++ sun50i_a100_ledc_start_xfer(priv, next_length);
++}
++
++static const char *const sun50i_a100_ledc_formats[] = {
++ "rgb",
++ "rbg",
++ "grb",
++ "gbr",
++ "brg",
++ "bgr",
++};
++
++static int sun50i_a100_ledc_parse_format(const struct device_node *np,
++ struct sun50i_a100_ledc *priv)
++{
++ const char *format = "grb";
++ u32 i;
++
++ of_property_read_string(np, "allwinner,pixel-format", &format);
++
++ for (i = 0; i < ARRAY_SIZE(sun50i_a100_ledc_formats); ++i) {
++ if (!strcmp(format, sun50i_a100_ledc_formats[i])) {
++ priv->format = i;
++ return 0;
++ }
++ }
++
++ dev_err(priv->dev, "Bad pixel format '%s'\n", format);
++
++ return -EINVAL;
++}
++
++static void sun50i_a100_ledc_set_format(struct sun50i_a100_ledc *priv)
++{
++ u32 val;
++
++ val = readl(priv->base + LEDC_CTRL_REG);
++ val &= ~LEDC_CTRL_REG_RGB_MODE;
++ val |= priv->format << 6;
++ writel(val, priv->base + LEDC_CTRL_REG);
++}
++
++static const struct sun50i_a100_ledc_timing sun50i_a100_ledc_default_timing = {
++ .t0h_ns = 336,
++ .t0l_ns = 840,
++ .t1h_ns = 882,
++ .t1l_ns = 294,
++ .treset_ns = 300000,
++};
++
++static int sun50i_a100_ledc_parse_timing(const struct device_node *np,
++ struct sun50i_a100_ledc *priv)
++{
++ struct sun50i_a100_ledc_timing *timing = &priv->timing;
++
++ *timing = sun50i_a100_ledc_default_timing;
++
++ of_property_read_u32(np, "allwinner,t0h-ns", &timing->t0h_ns);
++ of_property_read_u32(np, "allwinner,t0l-ns", &timing->t0l_ns);
++ of_property_read_u32(np, "allwinner,t1h-ns", &timing->t1h_ns);
++ of_property_read_u32(np, "allwinner,t1l-ns", &timing->t1l_ns);
++ of_property_read_u32(np, "allwinner,treset-ns", &timing->treset_ns);
++
++ return 0;
++}
++
++static void sun50i_a100_ledc_set_timing(struct sun50i_a100_ledc *priv)
++{
++ const struct sun50i_a100_ledc_timing *timing = &priv->timing;
++ unsigned long mod_freq = clk_get_rate(priv->mod_clk);
++ u32 cycle_ns = NSEC_PER_SEC / mod_freq;
++ u32 val;
++
++ val = (timing->t1h_ns / cycle_ns) << 21 |
++ (timing->t1l_ns / cycle_ns) << 16 |
++ (timing->t0h_ns / cycle_ns) << 6 |
++ (timing->t0l_ns / cycle_ns);
++ writel(val, priv->base + LEDC_T01_TIMING_CTRL_REG);
++
++ val = (timing->treset_ns / cycle_ns) << 16 |
++ (priv->num_leds - 1);
++ writel(val, priv->base + LEDC_RESET_TIMING_CTRL_REG);
++}
++
++static int sun50i_a100_ledc_resume(struct device *dev)
++{
++ struct sun50i_a100_ledc *priv = dev_get_drvdata(dev);
++ u32 val;
++ int ret;
++
++ ret = reset_control_deassert(priv->reset);
++ if (ret)
++ return ret;
++
++ ret = clk_prepare_enable(priv->bus_clk);
++ if (ret)
++ goto err_assert_reset;
++
++ ret = clk_prepare_enable(priv->mod_clk);
++ if (ret)
++ goto err_disable_bus_clk;
++
++ sun50i_a100_ledc_set_format(priv);
++ sun50i_a100_ledc_set_timing(priv);
++
++ /* The trigger level must be at least the burst length. */
++ val = readl(priv->base + LEDC_DMA_CTRL_REG);
++ val &= ~LEDC_DMA_CTRL_REG_FIFO_TRIG_LEVEL;
++ val |= LEDC_FIFO_DEPTH / 2;
++ writel(val, priv->base + LEDC_DMA_CTRL_REG);
++
++ val = LEDC_INT_CTRL_REG_GLOBAL_INT_EN |
++ LEDC_INT_CTRL_REG_TRANS_FINISH_INT_EN;
++ writel(val, priv->base + LEDC_INT_CTRL_REG);
++
++ return 0;
++
++err_disable_bus_clk:
++ clk_disable_unprepare(priv->bus_clk);
++err_assert_reset:
++ reset_control_assert(priv->reset);
++
++ return ret;
++}
++
++static int sun50i_a100_ledc_suspend(struct device *dev)
++{
++ struct sun50i_a100_ledc *priv = dev_get_drvdata(dev);
++
++ clk_disable_unprepare(priv->mod_clk);
++ clk_disable_unprepare(priv->bus_clk);
++ reset_control_assert(priv->reset);
++
++ return 0;
++}
++
++static void sun50i_a100_ledc_dma_cleanup(void *data)
++{
++ struct sun50i_a100_ledc *priv = data;
++ struct device *dma_dev = dmaengine_get_dma_device(priv->dma_chan);
++
++ if (priv->buffer)
++ dma_free_wc(dma_dev, LEDS_TO_BYTES(priv->num_leds),
++ priv->buffer, priv->dma_handle);
++ dma_release_channel(priv->dma_chan);
++}
++
++static int sun50i_a100_ledc_probe(struct platform_device *pdev)
++{
++ const struct device_node *np = pdev->dev.of_node;
++ struct dma_slave_config dma_cfg = {};
++ struct led_init_data init_data = {};
++ struct device *dev = &pdev->dev;
++ struct device_node *child;
++ struct sun50i_a100_ledc *priv;
++ struct resource *mem;
++ int count, irq, ret;
++
++ count = of_get_available_child_count(np);
++ if (!count)
++ return -ENODEV;
++ if (count > LEDC_MAX_LEDS) {
++ dev_err(dev, "Too many LEDs! (max is %d)\n", LEDC_MAX_LEDS);
++ return -EINVAL;
++ }
++
++ priv = devm_kzalloc(dev, struct_size(priv, leds, count), GFP_KERNEL);
++ if (!priv)
++ return -ENOMEM;
++
++ priv->dev = dev;
++ priv->num_leds = count;
++ spin_lock_init(&priv->lock);
++ dev_set_drvdata(dev, priv);
++
++ ret = sun50i_a100_ledc_parse_format(np, priv);
++ if (ret)
++ return ret;
++
++ ret = sun50i_a100_ledc_parse_timing(np, priv);
++ if (ret)
++ return ret;
++
++ priv->base = devm_platform_get_and_ioremap_resource(pdev, 0, &mem);
++ if (IS_ERR(priv->base))
++ return PTR_ERR(priv->base);
++
++ priv->bus_clk = devm_clk_get(dev, "bus");
++ if (IS_ERR(priv->bus_clk))
++ return PTR_ERR(priv->bus_clk);
++
++ priv->mod_clk = devm_clk_get(dev, "mod");
++ if (IS_ERR(priv->mod_clk))
++ return PTR_ERR(priv->mod_clk);
++
++ priv->reset = devm_reset_control_get_exclusive(dev, NULL);
++ if (IS_ERR(priv->reset))
++ return PTR_ERR(priv->reset);
++
++ priv->dma_chan = dma_request_chan(dev, "tx");
++ if (IS_ERR(priv->dma_chan))
++ return PTR_ERR(priv->dma_chan);
++
++ ret = devm_add_action_or_reset(dev, sun50i_a100_ledc_dma_cleanup, priv);
++ if (ret)
++ return ret;
++
++ dma_cfg.dst_addr = mem->start + LEDC_DATA_REG;
++ dma_cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
++ dma_cfg.dst_maxburst = LEDC_FIFO_DEPTH / 2;
++ ret = dmaengine_slave_config(priv->dma_chan, &dma_cfg);
++ if (ret)
++ return ret;
++
++ priv->buffer = dma_alloc_wc(dmaengine_get_dma_device(priv->dma_chan),
++ LEDS_TO_BYTES(priv->num_leds),
++ &priv->dma_handle, GFP_KERNEL);
++ if (!priv->buffer)
++ return -ENOMEM;
++
++ irq = platform_get_irq(pdev, 0);
++ if (irq < 0)
++ return irq;
++
++ ret = devm_request_irq(dev, irq, sun50i_a100_ledc_irq,
++ 0, dev_name(dev), priv);
++ if (ret)
++ return ret;
++
++ ret = sun50i_a100_ledc_resume(dev);
++ if (ret)
++ return ret;
++
++ for_each_available_child_of_node(np, child) {
++ struct sun50i_a100_ledc_led *led;
++ struct led_classdev *cdev;
++ u32 addr, color;
++
++ ret = of_property_read_u32(child, "reg", &addr);
++ if (ret || addr >= count) {
++ dev_err(dev, "LED 'reg' values must be from 0 to %d\n",
++ priv->num_leds - 1);
++ ret = -EINVAL;
++ goto err_put_child;
++ }
++
++ ret = of_property_read_u32(child, "color", &color);
++ if (ret || color != LED_COLOR_ID_RGB) {
++ dev_err(dev, "LED 'color' must be LED_COLOR_ID_RGB\n");
++ ret = -EINVAL;
++ goto err_put_child;
++ }
++
++ led = &priv->leds[addr];
++
++ led->subled_info[0].color_index = LED_COLOR_ID_RED;
++ led->subled_info[0].channel = 0;
++ led->subled_info[1].color_index = LED_COLOR_ID_GREEN;
++ led->subled_info[1].channel = 1;
++ led->subled_info[2].color_index = LED_COLOR_ID_BLUE;
++ led->subled_info[2].channel = 2;
++
++ led->mc_cdev.num_colors = ARRAY_SIZE(led->subled_info);
++ led->mc_cdev.subled_info = led->subled_info;
++
++ cdev = &led->mc_cdev.led_cdev;
++ cdev->max_brightness = U8_MAX;
++ cdev->brightness_set = sun50i_a100_ledc_brightness_set;
++
++ init_data.fwnode = of_fwnode_handle(child);
++
++ ret = devm_led_classdev_multicolor_register_ext(dev,
++ &led->mc_cdev,
++ &init_data);
++ if (ret) {
++ dev_err(dev, "Failed to register LED %u: %d\n",
++ addr, ret);
++ goto err_put_child;
++ }
++ }
++
++ dev_info(dev, "Registered %d LEDs\n", priv->num_leds);
++
++ return 0;
++
++err_put_child:
++ of_node_put(child);
++ sun50i_a100_ledc_suspend(&pdev->dev);
++
++ return ret;
++}
++
++static int sun50i_a100_ledc_remove(struct platform_device *pdev)
++{
++ sun50i_a100_ledc_suspend(&pdev->dev);
++
++ return 0;
++}
++
++static void sun50i_a100_ledc_shutdown(struct platform_device *pdev)
++{
++ sun50i_a100_ledc_suspend(&pdev->dev);
++}
++
++static const struct of_device_id sun50i_a100_ledc_of_match[] = {
++ { .compatible = "allwinner,sun50i-a100-ledc" },
++ {}
++};
++MODULE_DEVICE_TABLE(of, sun50i_a100_ledc_of_match);
++
++static SIMPLE_DEV_PM_OPS(sun50i_a100_ledc_pm,
++ sun50i_a100_ledc_suspend, sun50i_a100_ledc_resume);
++
++static struct platform_driver sun50i_a100_ledc_driver = {
++ .probe = sun50i_a100_ledc_probe,
++ .remove = sun50i_a100_ledc_remove,
++ .shutdown = sun50i_a100_ledc_shutdown,
++ .driver = {
++ .name = "sun50i-a100-ledc",
++ .of_match_table = sun50i_a100_ledc_of_match,
++ .pm = pm_ptr(&sun50i_a100_ledc_pm),
++ },
++};
++module_platform_driver(sun50i_a100_ledc_driver);
++
++MODULE_AUTHOR("Samuel Holland <samuel@sholland.org>");
++MODULE_DESCRIPTION("Allwinner A100 LED controller driver");
++MODULE_LICENSE("GPL");
--- /dev/null
+From 0040f071ab45d3098b2aad7e28e07593a5740782 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Thu, 25 Aug 2022 23:19:40 -0500
+Subject: [PATCH 056/117] arm64: dts: allwinner: a100: Add LED controller node
+
+Allwinner A100 contains an LED controller. Add it to the devicetree.
+
+Commit-changes: 5
+ - New patch for v5
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi | 14 ++++++++++++++
+ 1 file changed, 14 insertions(+)
+
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
+@@ -273,6 +273,20 @@
+ #size-cells = <0>;
+ };
+
++ ledc: led-controller@5018000 {
++ compatible = "allwinner,sun50i-a100-ledc";
++ reg = <0x5018000 0x400>;
++ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_LEDC>, <&ccu CLK_LEDC>;
++ clock-names = "bus", "mod";
++ resets = <&ccu RST_BUS_LEDC>;
++ dmas = <&dma 42>;
++ dma-names = "tx";
++ status = "disabled";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ };
++
+ ths: thermal-sensor@5070400 {
+ compatible = "allwinner,sun50i-a100-ths";
+ reg = <0x05070400 0x100>;
--- /dev/null
+From 595f76548e1d51a76b1ab201293ef441233921cf Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Thu, 11 Aug 2022 23:02:43 -0500
+Subject: [PATCH 057/117] riscv: dts: allwinner: d1: Add LED controller node
+
+Allwinner D1 contains an LED controller. Add its devicetree node, as
+well as the pinmux used by the reference board design.
+
+Commit-changes: 5
+ - New patch for v5
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi | 21 ++++++++++++++++++++
+ 1 file changed, 21 insertions(+)
+
+--- a/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
+@@ -116,6 +116,12 @@
+ };
+
+ /omit-if-no-ref/
++ ledc_pc0_pin: ledc-pc0-pin {
++ pins = "PC0";
++ function = "ledc";
++ };
++
++ /omit-if-no-ref/
+ mmc0_pins: mmc0-pins {
+ pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5";
+ function = "mmc0";
+@@ -178,6 +184,21 @@
+ #reset-cells = <1>;
+ };
+
++ ledc: led-controller@2008000 {
++ compatible = "allwinner,sun20i-d1-ledc",
++ "allwinner,sun50i-a100-ledc";
++ reg = <0x2008000 0x400>;
++ interrupts = <36 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_LEDC>, <&ccu CLK_LEDC>;
++ clock-names = "bus", "mod";
++ resets = <&ccu RST_BUS_LEDC>;
++ dmas = <&dma 42>;
++ dma-names = "tx";
++ status = "disabled";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ };
++
+ lradc: keys@2009800 {
+ compatible = "allwinner,sun20i-d1-lradc",
+ "allwinner,sun50i-r329-lradc";
--- /dev/null
+From e6eb041b2099ec3d07a4ec391a06e86d7697c9d1 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Thu, 11 Aug 2022 23:03:01 -0500
+Subject: [PATCH 058/117] riscv: dts: allwinner: d1: Add RGB LEDs to boards
+
+Some D1-based boards feature an onboard RGB LED. Enable them.
+
+Commit-changes: 5
+ - New patch for v5
+
+Series-version: 5
+
+Series-to: Pavel Machek <pavel@ucw.cz>
+Series-to: Chen-Yu Tsai <wens@csie.org>
+Series-to: Jernej Skrabec <jernej.skrabec@gmail.com>
+Series-to: linux-leds@vger.kernel.org
+Series-cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
+Series-cc: Rob Herring <robh+dt@kernel.org>
+Series-cc: devicetree@vger.kernel.org
+Series-cc: linux-arm-kernel@lists.infradead.org
+Series-cc: linux-kernel@vger.kernel.org
+Series-cc: linux-riscv@lists.infradead.org
+Series-cc: linux-sunxi@lists.linux.dev
+
+Cover-letter:
+leds: Allwinner A100 LED controller support
+This series adds bindings and a driver for the RGB LED controller found
+in some Allwinner SoCs, starting with A100. The hardware in the R329 and
+D1 SoCs appears to be identical.
+
+Patch 3 is included because the LED controller binding requires the DMA
+properties. That patch was sent previously[1], but never got merged.
+
+Patches 5-6 depend on the D1 devicetree series[2], but the rest of this
+series can be merged without them.
+
+This driver was tested on the D1 Nezha board.
+
+[1]: https://lore.kernel.org/linux-arm-kernel/20201110040553.1381-7-frank@allwinnertech.com/
+[2]: https://lore.kernel.org/linux-riscv/20220815050815.22340-1-samuel@sholland.org/
+END
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ .../boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dts | 12 ++++++++++++
+ arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts | 13 +++++++++++++
+ 2 files changed, 25 insertions(+)
+
+--- a/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dts
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dts
+@@ -58,6 +58,18 @@
+ status = "okay";
+ };
+
++&ledc {
++ pinctrl-0 = <&ledc_pc0_pin>;
++ pinctrl-names = "default";
++ status = "okay";
++
++ multi-led@0 {
++ reg = <0x0>;
++ color = <LED_COLOR_ID_RGB>;
++ function = LED_FUNCTION_STATUS;
++ };
++};
++
+ &lradc {
+ status = "okay";
+
+--- a/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
+@@ -5,6 +5,7 @@
+
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/input/input.h>
++#include <dt-bindings/leds/common.h>
+
+ #include "sun20i-d1.dtsi"
+ #include "sun20i-d1-common-regulators.dtsi"
+@@ -90,6 +91,18 @@
+ };
+ };
+
++&ledc {
++ pinctrl-0 = <&ledc_pc0_pin>;
++ pinctrl-names = "default";
++ status = "okay";
++
++ multi-led@0 {
++ reg = <0x0>;
++ color = <LED_COLOR_ID_RGB>;
++ function = LED_FUNCTION_STATUS;
++ };
++};
++
+ &lradc {
+ status = "okay";
+
--- /dev/null
+From effa2ef8717b0390e8fb0648e16df1b43610af53 Mon Sep 17 00:00:00 2001
+From: Ban Tao <fengzheng923@gmail.com>
+Date: Tue, 2 Mar 2021 20:40:23 +0800
+Subject: [PATCH 059/117] pwm: sun8i-v536: document device tree bindings
+
+This adds binding documentation for sun8i-v536 SoC PWM driver.
+
+Signed-off-by: Ban Tao <fengzheng923@gmail.com>
+---
+ .../bindings/pwm/pwm-sun8i-v536.txt | 24 +++++++++++++++++++
+ 1 file changed, 24 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/pwm/pwm-sun8i-v536.txt
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/pwm/pwm-sun8i-v536.txt
+@@ -0,0 +1,24 @@
++Allwinner sun8i-v536 SoC PWM controller
++
++Required properties:
++ - compatible: should be "allwinner,<name>-pwm"
++ "allwinner,sun8i-v833-pwm"
++ "allwinner,sun8i-v536-pwm"
++ "allwinner,sun50i-r818-pwm"
++ "allwinner,sun50i-a133-pwm"
++ "allwinner,sun50i-r329-pwm"
++ - reg: physical base address and length of the controller's registers
++ - #pwm-cells: should be 3. See pwm.txt in this directory for a description of
++ the cells format.
++ - clocks: From common clock binding, handle to the parent clock.
++ - resets: From reset clock binding, handle to the parent clock.
++
++Example:
++
++ pwm: pwm@300a0000 {
++ compatible = "allwinner,sun50i-r818-pwm";
++ reg = <0x0300a000 0x3ff>;
++ clocks = <&ccu CLK_BUS_PWM>;
++ resets = <&ccu RST_BUS_PWM>;
++ #pwm-cells = <3>;
++ };
--- /dev/null
+From 4919e67557eaebb9f155950e7cac547a507b59e5 Mon Sep 17 00:00:00 2001
+From: Ban Tao <fengzheng923@gmail.com>
+Date: Tue, 2 Mar 2021 20:37:37 +0800
+Subject: [PATCH 060/117] pwm: sunxi: Add Allwinner SoC PWM controller driver
+
+The Allwinner R818, A133, R329, V536 and V833 has a new PWM controller
+IP compared to the older Allwinner SoCs.
+
+Signed-off-by: Ban Tao <fengzheng923@gmail.com>
+---
+ MAINTAINERS | 6 +
+ drivers/pwm/Kconfig | 11 +
+ drivers/pwm/Makefile | 1 +
+ drivers/pwm/pwm-sun8i-v536.c | 401 +++++++++++++++++++++++++++++++++++
+ 4 files changed, 419 insertions(+)
+ create mode 100644 drivers/pwm/pwm-sun8i-v536.c
+
+--- a/MAINTAINERS
++++ b/MAINTAINERS
+@@ -802,6 +802,12 @@ S: Maintained
+ F: Documentation/devicetree/bindings/hwlock/allwinner,sun6i-a31-hwspinlock.yaml
+ F: drivers/hwspinlock/sun6i_hwspinlock.c
+
++ALLWINNER PWM DRIVER
++M: Ban Tao <fengzheng923@gmail.com>
++L: linux-pwm@vger.kernel.org
++S: Maintained
++F: drivers/pwm/pwm-sun8i-v536.c
++
+ ALLWINNER THERMAL DRIVER
+ M: Vasily Khoruzhick <anarsoul@gmail.com>
+ M: Yangtao Li <tiny.windzz@gmail.com>
+--- a/drivers/pwm/Kconfig
++++ b/drivers/pwm/Kconfig
+@@ -582,6 +582,17 @@ config PWM_SUN4I
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-sun4i.
+
++config PWM_SUN8I_V536
++ tristate "Allwinner SUN8I_V536 PWM support"
++ depends on ARCH_SUNXI || COMPILE_TEST
++ depends on HAS_IOMEM && COMMON_CLK
++ help
++ Enhanced PWM framework driver for Allwinner R818, A133, R329,
++ V536 and V833 SoCs.
++
++ To compile this driver as a module, choose M here: the module
++ will be called pwm-sun8i-v536.
++
+ config PWM_SUNPLUS
+ tristate "Sunplus PWM support"
+ depends on ARCH_SUNPLUS || COMPILE_TEST
+--- a/drivers/pwm/Makefile
++++ b/drivers/pwm/Makefile
+@@ -54,6 +54,7 @@ obj-$(CONFIG_PWM_STM32) += pwm-stm32.o
+ obj-$(CONFIG_PWM_STM32_LP) += pwm-stm32-lp.o
+ obj-$(CONFIG_PWM_STMPE) += pwm-stmpe.o
+ obj-$(CONFIG_PWM_SUN4I) += pwm-sun4i.o
++obj-$(CONFIG_PWM_SUN8I_V536) += pwm-sun8i-v536.o
+ obj-$(CONFIG_PWM_SUNPLUS) += pwm-sunplus.o
+ obj-$(CONFIG_PWM_TEGRA) += pwm-tegra.o
+ obj-$(CONFIG_PWM_TIECAP) += pwm-tiecap.o
+--- /dev/null
++++ b/drivers/pwm/pwm-sun8i-v536.c
+@@ -0,0 +1,401 @@
++// SPDX-License-Identifier: GPL-2.0-only
++/*
++ * Driver for Allwinner sun8i-v536 Pulse Width Modulation Controller
++ *
++ * Copyright (C) 2021 Ban Tao <fengzheng923@gmail.com>
++ *
++ *
++ * Limitations:
++ * - When PWM is disabled, the output is driven to inactive.
++ * - If the register is reconfigured while PWM is running,
++ * it does not complete the currently running period.
++ * - If the user input duty is beyond acceptible limits,
++ * -EINVAL is returned.
++ */
++
++#include <linux/err.h>
++#include <linux/io.h>
++#include <linux/module.h>
++#include <linux/of_device.h>
++#include <linux/pwm.h>
++#include <linux/clk.h>
++#include <linux/reset.h>
++
++#define PWM_GET_CLK_OFFSET(chan) (0x20 + ((chan >> 1) * 0x4))
++#define PWM_CLK_APB_SCR BIT(7)
++#define PWM_DIV_M 0
++#define PWM_DIV_M_MASK GENMASK(3, PWM_DIV_M)
++
++#define PWM_CLK_REG 0x40
++#define PWM_CLK_GATING BIT(0)
++
++#define PWM_ENABLE_REG 0x80
++#define PWM_EN BIT(0)
++
++#define PWM_CTL_REG(chan) (0x100 + 0x20 * chan)
++#define PWM_ACT_STA BIT(8)
++#define PWM_PRESCAL_K 0
++#define PWM_PRESCAL_K_MASK GENMASK(7, PWM_PRESCAL_K)
++
++#define PWM_PERIOD_REG(chan) (0x104 + 0x20 * chan)
++#define PWM_ENTIRE_CYCLE 16
++#define PWM_ENTIRE_CYCLE_MASK GENMASK(31, PWM_ENTIRE_CYCLE)
++#define PWM_ACT_CYCLE 0
++#define PWM_ACT_CYCLE_MASK GENMASK(15, PWM_ACT_CYCLE)
++
++#define BIT_CH(bit, chan) ((bit) << (chan))
++#define SET_BITS(shift, mask, reg, val) \
++ (((reg) & ~mask) | (val << (shift)))
++
++#define PWM_OSC_CLK 24000000
++#define PWM_PRESCALER_MAX 256
++#define PWM_CLK_DIV_M__MAX 9
++#define PWM_ENTIRE_CYCLE_MAX 65536
++
++struct sun8i_pwm_data {
++ unsigned int npwm;
++};
++
++struct sun8i_pwm_chip {
++ struct pwm_chip chip;
++ struct clk *clk;
++ struct reset_control *rst_clk;
++ void __iomem *base;
++ const struct sun8i_pwm_data *data;
++};
++
++static inline struct sun8i_pwm_chip *to_sun8i_pwm_chip(struct pwm_chip *chip)
++{
++ return container_of(chip, struct sun8i_pwm_chip, chip);
++}
++
++static inline u32 sun8i_pwm_readl(struct sun8i_pwm_chip *chip,
++ unsigned long offset)
++{
++ return readl(chip->base + offset);
++}
++
++static inline void sun8i_pwm_writel(struct sun8i_pwm_chip *chip,
++ u32 val, unsigned long offset)
++{
++ writel(val, chip->base + offset);
++}
++
++static void sun8i_pwm_get_state(struct pwm_chip *chip,
++ struct pwm_device *pwm,
++ struct pwm_state *state)
++{
++ struct sun8i_pwm_chip *pc = to_sun8i_pwm_chip(chip);
++ u64 clk_rate;
++ u32 tmp, entire_cycles, active_cycles;
++ unsigned int prescaler, div_m;
++
++ tmp = sun8i_pwm_readl(pc, PWM_GET_CLK_OFFSET(pwm->hwpwm));
++ if (tmp & PWM_CLK_APB_SCR)
++ clk_rate = clk_get_rate(pc->clk);
++ else
++ clk_rate = PWM_OSC_CLK;
++
++ tmp = sun8i_pwm_readl(pc, PWM_GET_CLK_OFFSET(pwm->hwpwm));
++ div_m = 0x1 << (tmp & PWM_DIV_M_MASK);
++
++ tmp = sun8i_pwm_readl(pc, PWM_CTL_REG(pwm->hwpwm));
++ prescaler = (tmp & PWM_PRESCAL_K_MASK) + 1;
++
++ tmp = sun8i_pwm_readl(pc, PWM_PERIOD_REG(pwm->hwpwm));
++ entire_cycles = (tmp >> PWM_ENTIRE_CYCLE) + 1;
++ active_cycles = (tmp & PWM_ACT_CYCLE_MASK);
++
++ /* (clk / div_m / prescaler) / entire_cycles = NSEC_PER_SEC / period_ns. */
++ state->period = DIV_ROUND_CLOSEST_ULL(entire_cycles * NSEC_PER_SEC,
++ clk_rate) * div_m * prescaler;
++ /* duty_ns / period_ns = active_cycles / entire_cycles. */
++ state->duty_cycle = DIV_ROUND_CLOSEST_ULL(active_cycles * state->period,
++ entire_cycles);
++
++ /* parsing polarity */
++ tmp = sun8i_pwm_readl(pc, PWM_CTL_REG(pwm->hwpwm));
++ if (tmp & PWM_ACT_STA)
++ state->polarity = PWM_POLARITY_NORMAL;
++ else
++ state->polarity = PWM_POLARITY_INVERSED;
++
++ /* parsing enabled */
++ tmp = sun8i_pwm_readl(pc, PWM_ENABLE_REG);
++ if (tmp & BIT_CH(PWM_EN, pwm->hwpwm))
++ state->enabled = true;
++ else
++ state->enabled = false;
++
++ dev_dbg(chip->dev, "duty_ns=%lld period_ns=%lld polarity=%s enabled=%s.\n",
++ state->duty_cycle, state->period,
++ state->polarity ? "inversed":"normal",
++ state->enabled ? "true":"false");
++}
++
++static void sun8i_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm,
++ enum pwm_polarity polarity)
++{
++ struct sun8i_pwm_chip *pc = to_sun8i_pwm_chip(chip);
++ u32 temp;
++
++ temp = sun8i_pwm_readl(pc, PWM_CTL_REG(pwm->hwpwm));
++
++ if (polarity == PWM_POLARITY_NORMAL)
++ temp |= PWM_ACT_STA;
++ else
++ temp &= ~PWM_ACT_STA;
++
++ sun8i_pwm_writel(pc, temp, PWM_CTL_REG(pwm->hwpwm));
++}
++
++static int sun8i_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
++ const struct pwm_state *state)
++{
++ struct sun8i_pwm_chip *pc = to_sun8i_pwm_chip(chip);
++ unsigned long long c;
++ unsigned long entire_cycles, active_cycles;
++ unsigned int div_m, prescaler;
++ u64 duty_ns = state->duty_cycle, period_ns = state->period;
++ u32 config;
++ int ret = 0;
++
++ if (period_ns > 334) {
++ /* if freq < 3M, then select 24M clock */
++ c = PWM_OSC_CLK;
++ config = sun8i_pwm_readl(pc, PWM_GET_CLK_OFFSET(pwm->hwpwm));
++ config &= ~PWM_CLK_APB_SCR;
++ sun8i_pwm_writel(pc, config, PWM_GET_CLK_OFFSET(pwm->hwpwm));
++ } else {
++ /* if freq > 3M, then select APB as clock */
++ c = clk_get_rate(pc->clk);
++ config = sun8i_pwm_readl(pc, PWM_GET_CLK_OFFSET(pwm->hwpwm));
++ config |= PWM_CLK_APB_SCR;
++ sun8i_pwm_writel(pc, config, PWM_GET_CLK_OFFSET(pwm->hwpwm));
++ }
++
++ dev_dbg(chip->dev, "duty_ns=%lld period_ns=%lld c =%llu.\n",
++ duty_ns, period_ns, c);
++
++ /*
++ * (clk / div_m / prescaler) / entire_cycles = NSEC_PER_SEC / period_ns.
++ * So, entire_cycles = clk * period_ns / NSEC_PER_SEC / div_m / prescaler.
++ */
++ c = c * period_ns;
++ c = DIV_ROUND_CLOSEST_ULL(c, NSEC_PER_SEC);
++ for (div_m = 0; div_m < PWM_CLK_DIV_M__MAX; div_m++) {
++ for (prescaler = 0; prescaler < PWM_PRESCALER_MAX; prescaler++) {
++ /*
++ * actual prescaler = prescaler(reg value) + 1.
++ * actual div_m = 0x1 << div_m(reg value).
++ */
++ entire_cycles = ((unsigned long)c >> div_m)/(prescaler + 1);
++ if (entire_cycles <= PWM_ENTIRE_CYCLE_MAX)
++ goto calc_end;
++ }
++ }
++ ret = -EINVAL;
++ goto exit;
++
++calc_end:
++ /*
++ * duty_ns / period_ns = active_cycles / entire_cycles.
++ * So, active_cycles = entire_cycles * duty_ns / period_ns.
++ */
++ c = (unsigned long long)entire_cycles * duty_ns;
++ c = DIV_ROUND_CLOSEST_ULL(c, period_ns);
++ active_cycles = c;
++ if (entire_cycles == 0)
++ entire_cycles++;
++
++ /* config clk div_m*/
++ config = sun8i_pwm_readl(pc, PWM_GET_CLK_OFFSET(pwm->hwpwm));
++ config = SET_BITS(PWM_DIV_M, PWM_DIV_M_MASK, config, div_m);
++ sun8i_pwm_writel(pc, config, PWM_GET_CLK_OFFSET(pwm->hwpwm));
++
++ /* config prescaler */
++ config = sun8i_pwm_readl(pc, PWM_CTL_REG(pwm->hwpwm));
++ config = SET_BITS(PWM_PRESCAL_K, PWM_PRESCAL_K_MASK, config, prescaler);
++ sun8i_pwm_writel(pc, config, PWM_CTL_REG(pwm->hwpwm));
++
++ /* config active and period cycles */
++ config = sun8i_pwm_readl(pc, PWM_PERIOD_REG(pwm->hwpwm));
++ config = SET_BITS(PWM_ACT_CYCLE, PWM_ACT_CYCLE_MASK, config, active_cycles);
++ config = SET_BITS(PWM_ENTIRE_CYCLE, PWM_ENTIRE_CYCLE_MASK,
++ config, (entire_cycles - 1));
++ sun8i_pwm_writel(pc, config, PWM_PERIOD_REG(pwm->hwpwm));
++
++ dev_dbg(chip->dev, "active_cycles=%lu entire_cycles=%lu prescaler=%u div_m=%u\n",
++ active_cycles, entire_cycles, prescaler, div_m);
++
++exit:
++ return ret;
++}
++
++static void sun8i_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm,
++ bool enable)
++{
++ struct sun8i_pwm_chip *pc = to_sun8i_pwm_chip(chip);
++ u32 clk, pwm_en;
++
++ clk = sun8i_pwm_readl(pc, PWM_CLK_REG);
++ pwm_en = sun8i_pwm_readl(pc, PWM_ENABLE_REG);
++
++ if (enable) {
++ clk |= BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
++ sun8i_pwm_writel(pc, clk, PWM_CLK_REG);
++
++ pwm_en |= BIT_CH(PWM_EN, pwm->hwpwm);
++ sun8i_pwm_writel(pc, pwm_en, PWM_ENABLE_REG);
++ } else {
++ pwm_en &= ~BIT_CH(PWM_EN, pwm->hwpwm);
++ sun8i_pwm_writel(pc, pwm_en, PWM_ENABLE_REG);
++
++ clk &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
++ sun8i_pwm_writel(pc, clk, PWM_CLK_REG);
++ }
++}
++
++static int sun8i_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
++ const struct pwm_state *state)
++{
++ struct pwm_state curstate;
++ int ret;
++
++ pwm_get_state(pwm, &curstate);
++
++ ret = sun8i_pwm_config(chip, pwm, state);
++
++ if (state->polarity != curstate.polarity)
++ sun8i_pwm_set_polarity(chip, pwm, state->polarity);
++
++ if (state->enabled != curstate.enabled)
++ sun8i_pwm_enable(chip, pwm, state->enabled);
++
++ return ret;
++}
++
++static const struct pwm_ops sun8i_pwm_ops = {
++ .get_state = sun8i_pwm_get_state,
++ .apply = sun8i_pwm_apply,
++ .owner = THIS_MODULE,
++};
++
++static const struct sun8i_pwm_data sun8i_pwm_data_c9 = {
++ .npwm = 9,
++};
++
++static const struct sun8i_pwm_data sun50i_pwm_data_c16 = {
++ .npwm = 16,
++};
++
++static const struct of_device_id sun8i_pwm_dt_ids[] = {
++ {
++ .compatible = "allwinner,sun8i-v536-pwm",
++ .data = &sun8i_pwm_data_c9,
++ }, {
++ .compatible = "allwinner,sun50i-r818-pwm",
++ .data = &sun50i_pwm_data_c16,
++ }, {
++ /* sentinel */
++ },
++};
++MODULE_DEVICE_TABLE(of, sun8i_pwm_dt_ids);
++
++static int sun8i_pwm_probe(struct platform_device *pdev)
++{
++ struct sun8i_pwm_chip *pc;
++ int ret;
++
++ pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
++ if (!pc)
++ return dev_err_probe(&pdev->dev, -ENOMEM,
++ "memory allocation failed\n");
++
++ pc->data = of_device_get_match_data(&pdev->dev);
++ if (!pc->data)
++ return dev_err_probe(&pdev->dev, -ENODEV,
++ "can't get match data\n");
++
++ pc->base = devm_platform_ioremap_resource(pdev, 0);
++ if (IS_ERR(pc->base))
++ return dev_err_probe(&pdev->dev, PTR_ERR(pc->base),
++ "can't remap pwm resource\n");
++
++ pc->clk = devm_clk_get(&pdev->dev, NULL);
++ if (IS_ERR(pc->clk))
++ return dev_err_probe(&pdev->dev, PTR_ERR(pc->clk),
++ "get clock failed\n");
++
++ pc->rst_clk = devm_reset_control_get_exclusive(&pdev->dev, NULL);
++ if (IS_ERR(pc->rst_clk))
++ return dev_err_probe(&pdev->dev, PTR_ERR(pc->rst_clk),
++ "get reset failed\n");
++
++ /* Deassert reset */
++ ret = reset_control_deassert(pc->rst_clk);
++ if (ret < 0)
++ return dev_err_probe(&pdev->dev, ret,
++ "cannot deassert reset control\n");
++
++ ret = clk_prepare_enable(pc->clk);
++ if (ret) {
++ dev_err(&pdev->dev, "cannot prepare and enable clk %pe\n",
++ ERR_PTR(ret));
++ goto err_clk;
++ }
++
++ pc->chip.dev = &pdev->dev;
++ pc->chip.ops = &sun8i_pwm_ops;
++ pc->chip.npwm = pc->data->npwm;
++ pc->chip.of_xlate = of_pwm_xlate_with_flags;
++ pc->chip.base = -1;
++ pc->chip.of_pwm_n_cells = 3;
++
++ ret = pwmchip_add(&pc->chip);
++ if (ret < 0) {
++ dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret);
++ goto err_pwm_add;
++ }
++
++ platform_set_drvdata(pdev, pc);
++
++ return 0;
++
++err_pwm_add:
++ clk_disable_unprepare(pc->clk);
++err_clk:
++ reset_control_assert(pc->rst_clk);
++
++ return ret;
++}
++
++static int sun8i_pwm_remove(struct platform_device *pdev)
++{
++ struct sun8i_pwm_chip *pc = platform_get_drvdata(pdev);
++ int ret;
++
++ ret = pwmchip_remove(&pc->chip);
++ if (ret)
++ return ret;
++
++ clk_disable_unprepare(pc->clk);
++ reset_control_assert(pc->rst_clk);
++
++ return 0;
++}
++
++static struct platform_driver sun8i_pwm_driver = {
++ .driver = {
++ .name = "sun8i-pwm-v536",
++ .of_match_table = sun8i_pwm_dt_ids,
++ },
++ .probe = sun8i_pwm_probe,
++ .remove = sun8i_pwm_remove,
++};
++module_platform_driver(sun8i_pwm_driver);
++
++MODULE_ALIAS("platform:sun8i-v536-pwm");
++MODULE_AUTHOR("Ban Tao <fengzheng923@gmail.com>");
++MODULE_DESCRIPTION("Allwinner sun8i-v536 PWM driver");
++MODULE_LICENSE("GPL v2");
--- /dev/null
+From 2f452dd6047126c42a0ad32ef0f10145c6047d66 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sun, 6 Jun 2021 11:05:20 -0500
+Subject: [PATCH 061/117] squash? pwm: sunxi: Add Allwinner SoC PWM controller
+ driver
+
+---
+ drivers/pwm/Kconfig | 4 ++--
+ drivers/pwm/pwm-sun8i-v536.c | 6 +-----
+ 2 files changed, 3 insertions(+), 7 deletions(-)
+
+--- a/drivers/pwm/Kconfig
++++ b/drivers/pwm/Kconfig
+@@ -583,11 +583,11 @@ config PWM_SUN4I
+ will be called pwm-sun4i.
+
+ config PWM_SUN8I_V536
+- tristate "Allwinner SUN8I_V536 PWM support"
++ tristate "Allwinner SUN8I V536 enhanced PWM support"
+ depends on ARCH_SUNXI || COMPILE_TEST
+ depends on HAS_IOMEM && COMMON_CLK
+ help
+- Enhanced PWM framework driver for Allwinner R818, A133, R329,
++ Enhanced PWM framework driver for Allwinner A133, D1, R329, R818,
+ V536 and V833 SoCs.
+
+ To compile this driver as a module, choose M here: the module
+--- a/drivers/pwm/pwm-sun8i-v536.c
++++ b/drivers/pwm/pwm-sun8i-v536.c
+@@ -373,12 +373,8 @@ err_clk:
+ static int sun8i_pwm_remove(struct platform_device *pdev)
+ {
+ struct sun8i_pwm_chip *pc = platform_get_drvdata(pdev);
+- int ret;
+-
+- ret = pwmchip_remove(&pc->chip);
+- if (ret)
+- return ret;
+
++ pwmchip_remove(&pc->chip);
+ clk_disable_unprepare(pc->clk);
+ reset_control_assert(pc->rst_clk);
+
--- /dev/null
+From 8bb576d8640fdf896650a4d4a1b2e60254d75eb2 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sun, 6 Jun 2021 10:56:25 -0500
+Subject: [PATCH 062/117] pwm: sun8i-v536: Add support for the Allwinner D1
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ drivers/pwm/pwm-sun8i-v536.c | 7 +++++++
+ 1 file changed, 7 insertions(+)
+
+--- a/drivers/pwm/pwm-sun8i-v536.c
++++ b/drivers/pwm/pwm-sun8i-v536.c
+@@ -285,6 +285,10 @@ static const struct sun8i_pwm_data sun8i
+ .npwm = 9,
+ };
+
++static const struct sun8i_pwm_data sun20i_pwm_data_c8 = {
++ .npwm = 8,
++};
++
+ static const struct sun8i_pwm_data sun50i_pwm_data_c16 = {
+ .npwm = 16,
+ };
+@@ -294,6 +298,9 @@ static const struct of_device_id sun8i_p
+ .compatible = "allwinner,sun8i-v536-pwm",
+ .data = &sun8i_pwm_data_c9,
+ }, {
++ .compatible = "allwinner,sun20i-d1-pwm",
++ .data = &sun20i_pwm_data_c8,
++ }, {
+ .compatible = "allwinner,sun50i-r818-pwm",
+ .data = &sun50i_pwm_data_c16,
+ }, {
--- /dev/null
+From 2ee8994e4db3978261e6c644e897400c4df5edeb Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Thu, 11 Aug 2022 22:24:52 -0500
+Subject: [PATCH 063/117] riscv: dts: allwinner: d1: Add PWM support
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi | 35 ++++++++++++++++++++
+ 1 file changed, 35 insertions(+)
+
+--- a/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
+@@ -155,6 +155,30 @@
+ };
+
+ /omit-if-no-ref/
++ pwm0_pd16_pin: pwm0-pd16-pin {
++ pins = "PD16";
++ function = "pwm0";
++ };
++
++ /omit-if-no-ref/
++ pwm2_pd18_pin: pwm2-pd18-pin {
++ pins = "PD18";
++ function = "pwm2";
++ };
++
++ /omit-if-no-ref/
++ pwm4_pd20_pin: pwm4-pd20-pin {
++ pins = "PD20";
++ function = "pwm4";
++ };
++
++ /omit-if-no-ref/
++ pwm7_pd22_pin: pwm7-pd22-pin {
++ pins = "PD22";
++ function = "pwm7";
++ };
++
++ /omit-if-no-ref/
+ uart0_pb8_pins: uart0-pb8-pins {
+ pins = "PB8", "PB9";
+ function = "uart0";
+@@ -173,6 +197,17 @@
+ };
+ };
+
++ pwm: pwm@2000c00 {
++ compatible = "allwinner,sun20i-d1-pwm";
++ reg = <0x2000c00 0x400>;
++ interrupts = <34 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_PWM>, <&osc24M>;
++ clock-names = "bus", "mod";
++ resets = <&ccu RST_BUS_PWM>;
++ status = "disabled";
++ #pwm-cells = <3>;
++ };
++
+ ccu: clock-controller@2001000 {
+ compatible = "allwinner,sun20i-d1-ccu";
+ reg = <0x2001000 0x1000>;
--- /dev/null
+From 5479c8efb6ffbbc8b7fd1068337037faf9c20a36 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Thu, 11 Aug 2022 22:25:40 -0500
+Subject: [PATCH 064/117] riscv: dts: allwinner: d1: Hook up PWM-controlled CPU
+ voltage regulators
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ .../allwinner/sun20i-d1-clockworkpi-v3.14.dts | 19 +++++++++++--------
+ .../sun20i-d1-dongshan-nezha-stu.dts | 19 +++++++++++--------
+ .../boot/dts/allwinner/sun20i-d1-nezha.dts | 19 +++++++++++--------
+ 3 files changed, 33 insertions(+), 24 deletions(-)
+
+--- a/arch/riscv/boot/dts/allwinner/sun20i-d1-clockworkpi-v3.14.dts
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-clockworkpi-v3.14.dts
+@@ -48,16 +48,13 @@
+ };
+ };
+
+- /*
+- * This regulator is PWM-controlled, but the PWM controller is not
+- * yet supported, so fix the regulator to its default voltage.
+- */
+ reg_vdd_cpu: vdd-cpu {
+- compatible = "regulator-fixed";
++ compatible = "pwm-regulator";
++ pwms = <&pwm 0 50000 0>;
++ pwm-supply = <®_vcc>;
+ regulator-name = "vdd-cpu";
+- regulator-min-microvolt = <1100000>;
+- regulator-max-microvolt = <1100000>;
+- vin-supply = <®_vcc>;
++ regulator-min-microvolt = <810000>;
++ regulator-max-microvolt = <1160000>;
+ };
+
+ wifi_pwrseq: wifi-pwrseq {
+@@ -254,6 +251,12 @@
+ };
+ };
+
++&pwm {
++ pinctrl-0 = <&pwm0_pd16_pin>;
++ pinctrl-names = "default";
++ status = "okay";
++};
++
+ &uart0 {
+ pinctrl-0 = <&uart0_pb8_pins>;
+ pinctrl-names = "default";
+--- a/arch/riscv/boot/dts/allwinner/sun20i-d1-dongshan-nezha-stu.dts
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-dongshan-nezha-stu.dts
+@@ -43,16 +43,13 @@
+ vin-supply = <®_vcc>;
+ };
+
+- /*
+- * This regulator is PWM-controlled, but the PWM controller is not
+- * yet supported, so fix the regulator to its default voltage.
+- */
+ reg_vdd_cpu: vdd-cpu {
+- compatible = "regulator-fixed";
++ compatible = "pwm-regulator";
++ pwms = <&pwm 0 50000 0>;
++ pwm-supply = <®_vcc>;
+ regulator-name = "vdd-cpu";
+- regulator-min-microvolt = <1100000>;
+- regulator-max-microvolt = <1100000>;
+- vin-supply = <®_vcc>;
++ regulator-min-microvolt = <810000>;
++ regulator-max-microvolt = <1160000>;
+ };
+ };
+
+@@ -95,6 +92,12 @@
+ status = "okay";
+ };
+
++&pwm {
++ pinctrl-0 = <&pwm0_pd16_pin>;
++ pinctrl-names = "default";
++ status = "okay";
++};
++
+ &uart0 {
+ pinctrl-0 = <&uart0_pb8_pins>;
+ pinctrl-names = "default";
+--- a/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
+@@ -35,16 +35,13 @@
+ vin-supply = <®_vcc>;
+ };
+
+- /*
+- * This regulator is PWM-controlled, but the PWM controller is not
+- * yet supported, so fix the regulator to its default voltage.
+- */
+ reg_vdd_cpu: vdd-cpu {
+- compatible = "regulator-fixed";
++ compatible = "pwm-regulator";
++ pwms = <&pwm 0 50000 0>;
++ pwm-supply = <®_vcc>;
+ regulator-name = "vdd-cpu";
+- regulator-min-microvolt = <1100000>;
+- regulator-max-microvolt = <1100000>;
+- vin-supply = <®_vcc>;
++ regulator-min-microvolt = <810000>;
++ regulator-max-microvolt = <1160000>;
+ };
+
+ wifi_pwrseq: wifi-pwrseq {
+@@ -155,6 +152,12 @@
+ status = "okay";
+ };
+
++&pwm {
++ pinctrl-0 = <&pwm0_pd16_pin>;
++ pinctrl-names = "default";
++ status = "okay";
++};
++
+ &uart0 {
+ pinctrl-0 = <&uart0_pb8_pins>;
+ pinctrl-names = "default";
--- /dev/null
+From 29360e65c326ea8bbac6e63b42aa91fb8f14d3bf Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Thu, 11 Aug 2022 22:57:13 -0500
+Subject: [PATCH 065/117] riscv: dts: allwinner: mangopi-mq-pro: Add PWM LED
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ .../boot/dts/allwinner/sun20i-d1-mangopi-mq-pro.dts | 12 ++++++++++++
+ 1 file changed, 12 insertions(+)
+
+--- a/arch/riscv/boot/dts/allwinner/sun20i-d1-mangopi-mq-pro.dts
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-mangopi-mq-pro.dts
+@@ -4,6 +4,7 @@
+ /dts-v1/;
+
+ #include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/leds/common.h>
+
+ #include "sun20i-d1.dtsi"
+ #include "sun20i-d1-common-regulators.dtsi"
+@@ -22,6 +23,17 @@
+ stdout-path = "serial0:115200n8";
+ };
+
++ leds {
++ compatible = "pwm-leds";
++
++ led {
++ color = <LED_COLOR_ID_BLUE>;
++ function = LED_FUNCTION_STATUS;
++ max-brightness = <255>;
++ pwms = <&pwm 2 50000 0>;
++ };
++ };
++
+ reg_avdd2v8: avdd2v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "avdd2v8";
--- /dev/null
+From bccb19038038c7377275d74bb815f5f9363ba2e3 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sat, 13 Nov 2021 10:08:41 -0600
+Subject: [PATCH 066/117] ASoC: dt-bindings: sun4i-spdif: Require resets for H6
+
+The H6 variant has a module reset, and it is used by the driver. So the
+resets property should be required in the binding for this variant.
+
+Fixes: b20453031472 ("dt-bindings: sound: sun4i-spdif: Add Allwinner H6 compatible")
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ .../devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml
++++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml
+@@ -61,6 +61,7 @@ allOf:
+ enum:
+ - allwinner,sun6i-a31-spdif
+ - allwinner,sun8i-h3-spdif
++ - allwinner,sun50i-h6-spdif
+
+ then:
+ required:
--- /dev/null
+From 4e72722bfb7dec028e11278a924bb8bef3e10897 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sat, 13 Nov 2021 10:48:24 -0600
+Subject: [PATCH 067/117] ASoC: dt-bindings: sun4i-spdif: Add compatible for D1
+
+D1 mostly keeps the existing register layout, but it separates the
+module clock into separate clocks for the RX block and the TX block.
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ .../sound/allwinner,sun4i-a10-spdif.yaml | 54 +++++++++++++++----
+ 1 file changed, 44 insertions(+), 10 deletions(-)
+
+--- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml
++++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml
+@@ -18,10 +18,12 @@ properties:
+
+ compatible:
+ oneOf:
+- - const: allwinner,sun4i-a10-spdif
+- - const: allwinner,sun6i-a31-spdif
+- - const: allwinner,sun8i-h3-spdif
+- - const: allwinner,sun50i-h6-spdif
++ - enum:
++ - allwinner,sun4i-a10-spdif
++ - allwinner,sun6i-a31-spdif
++ - allwinner,sun8i-h3-spdif
++ - allwinner,sun20i-d1-spdif
++ - allwinner,sun50i-h6-spdif
+ - items:
+ - const: allwinner,sun8i-a83t-spdif
+ - const: allwinner,sun8i-h3-spdif
+@@ -36,14 +38,12 @@ properties:
+ maxItems: 1
+
+ clocks:
+- items:
+- - description: Bus Clock
+- - description: Module Clock
++ minItems: 2
++ maxItems: 3
+
+ clock-names:
+- items:
+- - const: apb
+- - const: spdif
++ minItems: 2
++ maxItems: 3
+
+ # Even though it only applies to subschemas under the conditionals,
+ # not listing them here will trigger a warning because of the
+@@ -59,8 +59,42 @@ allOf:
+ compatible:
+ contains:
+ enum:
++ - allwinner,sun20i-d1-spdif
++
++ then:
++ properties:
++ clocks:
++ items:
++ - description: Bus Clock
++ - description: RX Module Clock
++ - description: TX Module Clock
++
++ clock-names:
++ items:
++ - const: apb
++ - const: rx
++ - const: tx
++
++ else:
++ properties:
++ clocks:
++ items:
++ - description: Bus Clock
++ - description: Module Clock
++
++ clock-names:
++ items:
++ - const: apb
++ - const: spdif
++
++ - if:
++ properties:
++ compatible:
++ contains:
++ enum:
+ - allwinner,sun6i-a31-spdif
+ - allwinner,sun8i-h3-spdif
++ - allwinner,sun20i-d1-spdif
+ - allwinner,sun50i-h6-spdif
+
+ then:
--- /dev/null
+From 1d85b3609cf4239f7e971b839f1ab985413cd560 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sat, 13 Nov 2021 11:12:14 -0600
+Subject: [PATCH 068/117] ASoC: sun4i-spdif: Assert reset when removing the
+ device
+
+This completes reversing the process done in the probe function.
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ sound/soc/sunxi/sun4i-spdif.c | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/sound/soc/sunxi/sun4i-spdif.c
++++ b/sound/soc/sunxi/sun4i-spdif.c
+@@ -710,10 +710,14 @@ err_unregister:
+
+ static int sun4i_spdif_remove(struct platform_device *pdev)
+ {
++ struct sun4i_spdif_dev *host = dev_get_drvdata(&pdev->dev);
++
+ pm_runtime_disable(&pdev->dev);
+ if (!pm_runtime_status_suspended(&pdev->dev))
+ sun4i_spdif_runtime_suspend(&pdev->dev);
+
++ reset_control_assert(host->rst);
++
+ return 0;
+ }
+
--- /dev/null
+From 0efd742482dbe4b17a441eab5c57231d65f9a852 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sat, 13 Nov 2021 11:14:30 -0600
+Subject: [PATCH 069/117] ASoC: sun4i-spdif: Simplify code around optional
+ resets
+
+The driver does not need to care about which variants have a reset;
+the devicetree binding already enforces that the necessary resources are
+provided. Simplify the logic by always calling the optional getter,
+which will return NULL if no reset reference is found.
+
+Also clean up the error handling, which should not print a misleading
+error in the EPROBE_DEFER case.
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ sound/soc/sunxi/sun4i-spdif.c | 22 ++++++----------------
+ 1 file changed, 6 insertions(+), 16 deletions(-)
+
+--- a/sound/soc/sunxi/sun4i-spdif.c
++++ b/sound/soc/sunxi/sun4i-spdif.c
+@@ -170,12 +170,10 @@
+ * struct sun4i_spdif_quirks - Differences between SoC variants.
+ *
+ * @reg_dac_txdata: TX FIFO offset for DMA config.
+- * @has_reset: SoC needs reset deasserted.
+ * @val_fctl_ftx: TX FIFO flush bitmask.
+ */
+ struct sun4i_spdif_quirks {
+ unsigned int reg_dac_txdata;
+- bool has_reset;
+ unsigned int val_fctl_ftx;
+ };
+
+@@ -546,19 +544,16 @@ static const struct sun4i_spdif_quirks s
+ static const struct sun4i_spdif_quirks sun6i_a31_spdif_quirks = {
+ .reg_dac_txdata = SUN4I_SPDIF_TXFIFO,
+ .val_fctl_ftx = SUN4I_SPDIF_FCTL_FTX,
+- .has_reset = true,
+ };
+
+ static const struct sun4i_spdif_quirks sun8i_h3_spdif_quirks = {
+ .reg_dac_txdata = SUN8I_SPDIF_TXFIFO,
+ .val_fctl_ftx = SUN4I_SPDIF_FCTL_FTX,
+- .has_reset = true,
+ };
+
+ static const struct sun4i_spdif_quirks sun50i_h6_spdif_quirks = {
+ .reg_dac_txdata = SUN8I_SPDIF_TXFIFO,
+ .val_fctl_ftx = SUN50I_H6_SPDIF_FCTL_FTX,
+- .has_reset = true,
+ };
+
+ static const struct of_device_id sun4i_spdif_of_match[] = {
+@@ -672,17 +667,12 @@ static int sun4i_spdif_probe(struct plat
+
+ platform_set_drvdata(pdev, host);
+
+- if (quirks->has_reset) {
+- host->rst = devm_reset_control_get_optional_exclusive(&pdev->dev,
+- NULL);
+- if (PTR_ERR(host->rst) == -EPROBE_DEFER) {
+- ret = -EPROBE_DEFER;
+- dev_err(&pdev->dev, "Failed to get reset: %d\n", ret);
+- return ret;
+- }
+- if (!IS_ERR(host->rst))
+- reset_control_deassert(host->rst);
+- }
++ host->rst = devm_reset_control_get_optional_exclusive(&pdev->dev, NULL);
++ if (IS_ERR(host->rst))
++ return dev_err_probe(&pdev->dev, PTR_ERR(host->rst),
++ "Failed to get reset\n");
++
++ reset_control_deassert(host->rst);
+
+ ret = devm_snd_soc_register_component(&pdev->dev,
+ &sun4i_spdif_component, &sun4i_spdif_dai, 1);
--- /dev/null
+From b42a9e0cf6b0ca78b4ef5310de967d515a3cca03 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sun, 13 Jun 2021 23:53:16 -0500
+Subject: [PATCH 070/117] ASoC: sun4i-spdif: Add support for separate RX/TX
+ clocks
+
+On older variants of the hardware, the RX and TX blocks share a single
+module clock, named "spdif" in the DT binding. The D1 variant has
+separate RX and TX clocks, so the TX module clock is named "tx" in the
+binding. To support this, supply the clock name in the quirks structure.
+
+Since the driver supports only TX, only the TX clock name is needed.
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ sound/soc/sunxi/sun4i-spdif.c | 24 +++++++++++++++---------
+ 1 file changed, 15 insertions(+), 9 deletions(-)
+
+--- a/sound/soc/sunxi/sun4i-spdif.c
++++ b/sound/soc/sunxi/sun4i-spdif.c
+@@ -169,18 +169,20 @@
+ /**
+ * struct sun4i_spdif_quirks - Differences between SoC variants.
+ *
++ * @tx_clk_name: firmware name for the TX clock reference.
+ * @reg_dac_txdata: TX FIFO offset for DMA config.
+ * @val_fctl_ftx: TX FIFO flush bitmask.
+ */
+ struct sun4i_spdif_quirks {
++ const char *tx_clk_name;
+ unsigned int reg_dac_txdata;
+ unsigned int val_fctl_ftx;
+ };
+
+ struct sun4i_spdif_dev {
+ struct platform_device *pdev;
+- struct clk *spdif_clk;
+ struct clk *apb_clk;
++ struct clk *tx_clk;
+ struct reset_control *rst;
+ struct snd_soc_dai_driver cpu_dai_drv;
+ struct regmap *regmap;
+@@ -313,7 +315,7 @@ static int sun4i_spdif_hw_params(struct
+ return -EINVAL;
+ }
+
+- ret = clk_set_rate(host->spdif_clk, mclk);
++ ret = clk_set_rate(host->tx_clk, mclk);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "Setting SPDIF clock rate for %d Hz failed!\n", mclk);
+@@ -537,21 +539,25 @@ static struct snd_soc_dai_driver sun4i_s
+ };
+
+ static const struct sun4i_spdif_quirks sun4i_a10_spdif_quirks = {
++ .tx_clk_name = "spdif",
+ .reg_dac_txdata = SUN4I_SPDIF_TXFIFO,
+ .val_fctl_ftx = SUN4I_SPDIF_FCTL_FTX,
+ };
+
+ static const struct sun4i_spdif_quirks sun6i_a31_spdif_quirks = {
++ .tx_clk_name = "spdif",
+ .reg_dac_txdata = SUN4I_SPDIF_TXFIFO,
+ .val_fctl_ftx = SUN4I_SPDIF_FCTL_FTX,
+ };
+
+ static const struct sun4i_spdif_quirks sun8i_h3_spdif_quirks = {
++ .tx_clk_name = "spdif",
+ .reg_dac_txdata = SUN8I_SPDIF_TXFIFO,
+ .val_fctl_ftx = SUN4I_SPDIF_FCTL_FTX,
+ };
+
+ static const struct sun4i_spdif_quirks sun50i_h6_spdif_quirks = {
++ .tx_clk_name = "spdif",
+ .reg_dac_txdata = SUN8I_SPDIF_TXFIFO,
+ .val_fctl_ftx = SUN50I_H6_SPDIF_FCTL_FTX,
+ };
+@@ -591,7 +597,7 @@ static int sun4i_spdif_runtime_suspend(s
+ {
+ struct sun4i_spdif_dev *host = dev_get_drvdata(dev);
+
+- clk_disable_unprepare(host->spdif_clk);
++ clk_disable_unprepare(host->tx_clk);
+ clk_disable_unprepare(host->apb_clk);
+
+ return 0;
+@@ -602,12 +608,12 @@ static int sun4i_spdif_runtime_resume(st
+ struct sun4i_spdif_dev *host = dev_get_drvdata(dev);
+ int ret;
+
+- ret = clk_prepare_enable(host->spdif_clk);
++ ret = clk_prepare_enable(host->tx_clk);
+ if (ret)
+ return ret;
+ ret = clk_prepare_enable(host->apb_clk);
+ if (ret)
+- clk_disable_unprepare(host->spdif_clk);
++ clk_disable_unprepare(host->tx_clk);
+
+ return ret;
+ }
+@@ -655,10 +661,10 @@ static int sun4i_spdif_probe(struct plat
+ return PTR_ERR(host->apb_clk);
+ }
+
+- host->spdif_clk = devm_clk_get(&pdev->dev, "spdif");
+- if (IS_ERR(host->spdif_clk)) {
+- dev_err(&pdev->dev, "failed to get a spdif clock.\n");
+- return PTR_ERR(host->spdif_clk);
++ host->tx_clk = devm_clk_get(&pdev->dev, quirks->tx_clk_name);
++ if (IS_ERR(host->tx_clk)) {
++ dev_err(&pdev->dev, "failed to get TX module clock.\n");
++ return PTR_ERR(host->tx_clk);
+ }
+
+ host->dma_params_tx.addr = res->start + quirks->reg_dac_txdata;
--- /dev/null
+From af01261bf4e334cad158519291e5bc38765c955f Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sun, 13 Jun 2021 23:53:26 -0500
+Subject: [PATCH 071/117] ASoC: sun4i-spdif: Add support for the D1 variant
+
+The D1 variant is similar to the H6 variant, except for its clock setup.
+The clock tree changes impact some register fields on the RX side, but
+those are not yet relevant, because RX is not supported by this driver.
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ sound/soc/sunxi/sun4i-spdif.c | 10 ++++++++++
+ 1 file changed, 10 insertions(+)
+
+--- a/sound/soc/sunxi/sun4i-spdif.c
++++ b/sound/soc/sunxi/sun4i-spdif.c
+@@ -556,6 +556,12 @@ static const struct sun4i_spdif_quirks s
+ .val_fctl_ftx = SUN4I_SPDIF_FCTL_FTX,
+ };
+
++static const struct sun4i_spdif_quirks sun20i_d1_spdif_quirks = {
++ .tx_clk_name = "tx",
++ .reg_dac_txdata = SUN8I_SPDIF_TXFIFO,
++ .val_fctl_ftx = SUN50I_H6_SPDIF_FCTL_FTX,
++};
++
+ static const struct sun4i_spdif_quirks sun50i_h6_spdif_quirks = {
+ .tx_clk_name = "spdif",
+ .reg_dac_txdata = SUN8I_SPDIF_TXFIFO,
+@@ -576,6 +582,10 @@ static const struct of_device_id sun4i_s
+ .data = &sun8i_h3_spdif_quirks,
+ },
+ {
++ .compatible = "allwinner,sun20i-d1-spdif",
++ .data = &sun20i_d1_spdif_quirks,
++ },
++ {
+ .compatible = "allwinner,sun50i-h6-spdif",
+ .data = &sun50i_h6_spdif_quirks,
+ },
--- /dev/null
+From 36153e325aa912268a5a5d4574dc7092e67c8008 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Wed, 17 Aug 2022 01:54:46 -0500
+Subject: [PATCH 072/117] riscv: dts: allwinner: d1: Add SPDIF support
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi | 16 ++++++++++++++++
+ 1 file changed, 16 insertions(+)
+
+--- a/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
+@@ -333,6 +333,22 @@
+ #sound-dai-cells = <0>;
+ };
+
++ // TODO: add receive functionality
++ spdif: spdif@2036000 {
++ compatible = "allwinner,sun20i-d1-spdif";
++ reg = <0x2036000 0x400>;
++ interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_SPDIF>,
++ <&ccu CLK_SPDIF_RX>,
++ <&ccu CLK_SPDIF_TX>;
++ clock-names = "apb", "rx", "tx";
++ resets = <&ccu RST_BUS_SPDIF>;
++ dmas = <&dma 2>, <&dma 2>;
++ dma-names = "rx", "tx";
++ status = "disabled";
++ #sound-dai-cells = <0>;
++ };
++
+ timer: timer@2050000 {
+ compatible = "allwinner,sun20i-d1-timer",
+ "allwinner,sun8i-a23-timer";
--- /dev/null
+From c2b3f2c723e1b558afe5661bb91669e3b68154f7 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sun, 13 Jun 2021 23:52:47 -0500
+Subject: [PATCH 073/117] ASoC: sun4i-spdif: Add support for separate resets
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ sound/soc/sunxi/sun4i-spdif.c | 5 +++--
+ 1 file changed, 3 insertions(+), 2 deletions(-)
+
+--- a/sound/soc/sunxi/sun4i-spdif.c
++++ b/sound/soc/sunxi/sun4i-spdif.c
+@@ -28,10 +28,11 @@
+ #include <sound/soc.h>
+
+ #define SUN4I_SPDIF_CTL (0x00)
++ #define SUN4I_SPDIF_CTL_RST_RX BIT(12)
+ #define SUN4I_SPDIF_CTL_MCLKDIV(v) ((v) << 4) /* v even */
+ #define SUN4I_SPDIF_CTL_MCLKOUTEN BIT(2)
+ #define SUN4I_SPDIF_CTL_GEN BIT(1)
+- #define SUN4I_SPDIF_CTL_RESET BIT(0)
++ #define SUN4I_SPDIF_CTL_RST_TX BIT(0)
+
+ #define SUN4I_SPDIF_TXCFG (0x04)
+ #define SUN4I_SPDIF_TXCFG_SINGLEMOD BIT(31)
+@@ -196,7 +197,7 @@ static void sun4i_spdif_configure(struct
+ const struct sun4i_spdif_quirks *quirks = host->quirks;
+
+ /* soft reset SPDIF */
+- regmap_write(host->regmap, SUN4I_SPDIF_CTL, SUN4I_SPDIF_CTL_RESET);
++ regmap_write(host->regmap, SUN4I_SPDIF_CTL, SUN4I_SPDIF_CTL_RST_TX);
+
+ /* flush TX FIFO */
+ regmap_update_bits(host->regmap, SUN4I_SPDIF_FCTL,
--- /dev/null
+From e8e8a9490b2d4acc8670256dd3ba7d2a77346c4d Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Thu, 11 Aug 2022 22:23:05 -0500
+Subject: [PATCH 074/117] dt-bindings: spi: sun6i: Add R329 variant
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ .../devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml | 8 ++++++++
+ 1 file changed, 8 insertions(+)
+
+--- a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml
++++ b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml
+@@ -21,6 +21,7 @@ properties:
+ oneOf:
+ - const: allwinner,sun6i-a31-spi
+ - const: allwinner,sun8i-h3-spi
++ - const: allwinner,sun50i-r329-spi
+ - items:
+ - enum:
+ - allwinner,sun8i-r40-spi
+@@ -28,6 +29,13 @@ properties:
+ - allwinner,sun50i-h616-spi
+ - allwinner,suniv-f1c100s-spi
+ - const: allwinner,sun8i-h3-spi
++ - items:
++ - const: allwinner,sun20i-d1-spi
++ - const: allwinner,sun50i-r329-spi
++ - items:
++ - const: allwinner,sun20i-d1-spi-dbi
++ - const: allwinner,sun50i-r329-spi-dbi
++ - const: allwinner,sun50i-r329-spi
+
+ reg:
+ maxItems: 1
--- /dev/null
+From dbc9e83cefe51d19877a4a7349ebbeafa31c0e06 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Fri, 16 Jul 2021 21:33:16 -0500
+Subject: [PATCH 075/117] spi: spi-sun6i: Use a struct for quirks
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ drivers/spi/spi-sun6i.c | 32 ++++++++++++++++++++++----------
+ 1 file changed, 22 insertions(+), 10 deletions(-)
+
+--- a/drivers/spi/spi-sun6i.c
++++ b/drivers/spi/spi-sun6i.c
+@@ -85,7 +85,12 @@
+ #define SUN6I_TXDATA_REG 0x200
+ #define SUN6I_RXDATA_REG 0x300
+
++struct sun6i_spi_quirks {
++ unsigned long fifo_depth;
++};
++
+ struct sun6i_spi {
++ const struct sun6i_spi_quirks *quirks;
+ struct spi_master *master;
+ void __iomem *base_addr;
+ dma_addr_t dma_addr_rx;
+@@ -100,7 +105,6 @@ struct sun6i_spi {
+ const u8 *tx_buf;
+ u8 *rx_buf;
+ int len;
+- unsigned long fifo_depth;
+ };
+
+ static inline u32 sun6i_spi_read(struct sun6i_spi *sspi, u32 reg)
+@@ -157,7 +161,7 @@ static inline void sun6i_spi_fill_fifo(s
+ u8 byte;
+
+ /* See how much data we can fit */
+- cnt = sspi->fifo_depth - sun6i_spi_get_tx_fifo_count(sspi);
++ cnt = sspi->quirks->fifo_depth - sun6i_spi_get_tx_fifo_count(sspi);
+
+ len = min((int)cnt, sspi->len);
+
+@@ -300,14 +304,14 @@ static int sun6i_spi_transfer_one(struct
+ * the hardcoded value used in old generation of Allwinner
+ * SPI controller. (See spi-sun4i.c)
+ */
+- trig_level = sspi->fifo_depth / 4 * 3;
++ trig_level = sspi->quirks->fifo_depth / 4 * 3;
+ } else {
+ /*
+ * Setup FIFO DMA request trigger level
+ * We choose 1/2 of the full fifo depth, that value will
+ * be used as DMA burst length.
+ */
+- trig_level = sspi->fifo_depth / 2;
++ trig_level = sspi->quirks->fifo_depth / 2;
+
+ if (tfr->tx_buf)
+ reg |= SUN6I_FIFO_CTL_TF_DRQ_EN;
+@@ -421,9 +425,9 @@ static int sun6i_spi_transfer_one(struct
+ reg = SUN6I_INT_CTL_TC;
+
+ if (!use_dma) {
+- if (rx_len > sspi->fifo_depth)
++ if (rx_len > sspi->quirks->fifo_depth)
+ reg |= SUN6I_INT_CTL_RF_RDY;
+- if (tx_len > sspi->fifo_depth)
++ if (tx_len > sspi->quirks->fifo_depth)
+ reg |= SUN6I_INT_CTL_TF_ERQ;
+ }
+
+@@ -569,7 +573,7 @@ static bool sun6i_spi_can_dma(struct spi
+ * the fifo length we can just fill the fifo and wait for a single
+ * irq, so don't bother setting up dma
+ */
+- return xfer->len > sspi->fifo_depth;
++ return xfer->len > sspi->quirks->fifo_depth;
+ }
+
+ static int sun6i_spi_probe(struct platform_device *pdev)
+@@ -608,7 +612,7 @@ static int sun6i_spi_probe(struct platfo
+ }
+
+ sspi->master = master;
+- sspi->fifo_depth = (unsigned long)of_device_get_match_data(&pdev->dev);
++ sspi->quirks = of_device_get_match_data(&pdev->dev);
+
+ master->max_speed_hz = 100 * 1000 * 1000;
+ master->min_speed_hz = 3 * 1000;
+@@ -723,9 +727,17 @@ static int sun6i_spi_remove(struct platf
+ return 0;
+ }
+
++static const struct sun6i_spi_quirks sun6i_a31_spi_quirks = {
++ .fifo_depth = SUN6I_FIFO_DEPTH,
++};
++
++static const struct sun6i_spi_quirks sun8i_h3_spi_quirks = {
++ .fifo_depth = SUN8I_FIFO_DEPTH,
++};
++
+ static const struct of_device_id sun6i_spi_match[] = {
+- { .compatible = "allwinner,sun6i-a31-spi", .data = (void *)SUN6I_FIFO_DEPTH },
+- { .compatible = "allwinner,sun8i-h3-spi", .data = (void *)SUN8I_FIFO_DEPTH },
++ { .compatible = "allwinner,sun6i-a31-spi", .data = &sun6i_a31_spi_quirks },
++ { .compatible = "allwinner,sun8i-h3-spi", .data = &sun8i_h3_spi_quirks },
+ {}
+ };
+ MODULE_DEVICE_TABLE(of, sun6i_spi_match);
--- /dev/null
+From ec8dfb455da3822451129257ab21e2f0d03a6ae3 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Fri, 16 Jul 2021 21:46:31 -0500
+Subject: [PATCH 076/117] spi: spi-sun6i: Add Allwinner R329 support
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ drivers/spi/spi-sun6i.c | 78 ++++++++++++++++++++++++++---------------
+ 1 file changed, 49 insertions(+), 29 deletions(-)
+
+--- a/drivers/spi/spi-sun6i.c
++++ b/drivers/spi/spi-sun6i.c
+@@ -30,6 +30,7 @@
+ #define SUN6I_GBL_CTL_REG 0x04
+ #define SUN6I_GBL_CTL_BUS_ENABLE BIT(0)
+ #define SUN6I_GBL_CTL_MASTER BIT(1)
++#define SUN6I_GBL_CTL_SAMPLE_MODE BIT(2)
+ #define SUN6I_GBL_CTL_TP BIT(7)
+ #define SUN6I_GBL_CTL_RST BIT(31)
+
+@@ -87,6 +88,8 @@
+
+ struct sun6i_spi_quirks {
+ unsigned long fifo_depth;
++ bool has_divider : 1;
++ bool has_new_sample_mode : 1;
+ };
+
+ struct sun6i_spi {
+@@ -362,38 +365,44 @@ static int sun6i_spi_transfer_one(struct
+ sun6i_spi_write(sspi, SUN6I_TFR_CTL_REG, reg);
+
+ /* Ensure that we have a parent clock fast enough */
+- mclk_rate = clk_get_rate(sspi->mclk);
+- if (mclk_rate < (2 * tfr->speed_hz)) {
+- clk_set_rate(sspi->mclk, 2 * tfr->speed_hz);
++ if (sspi->quirks->has_divider) {
+ mclk_rate = clk_get_rate(sspi->mclk);
+- }
++ if (mclk_rate < (2 * tfr->speed_hz)) {
++ clk_set_rate(sspi->mclk, 2 * tfr->speed_hz);
++ mclk_rate = clk_get_rate(sspi->mclk);
++ }
+
+- /*
+- * Setup clock divider.
+- *
+- * We have two choices there. Either we can use the clock
+- * divide rate 1, which is calculated thanks to this formula:
+- * SPI_CLK = MOD_CLK / (2 ^ cdr)
+- * Or we can use CDR2, which is calculated with the formula:
+- * SPI_CLK = MOD_CLK / (2 * (cdr + 1))
+- * Wether we use the former or the latter is set through the
+- * DRS bit.
+- *
+- * First try CDR2, and if we can't reach the expected
+- * frequency, fall back to CDR1.
+- */
+- div_cdr1 = DIV_ROUND_UP(mclk_rate, tfr->speed_hz);
+- div_cdr2 = DIV_ROUND_UP(div_cdr1, 2);
+- if (div_cdr2 <= (SUN6I_CLK_CTL_CDR2_MASK + 1)) {
+- reg = SUN6I_CLK_CTL_CDR2(div_cdr2 - 1) | SUN6I_CLK_CTL_DRS;
+- tfr->effective_speed_hz = mclk_rate / (2 * div_cdr2);
++ /*
++ * Setup clock divider.
++ *
++ * We have two choices there. Either we can use the clock
++ * divide rate 1, which is calculated thanks to this formula:
++ * SPI_CLK = MOD_CLK / (2 ^ cdr)
++ * Or we can use CDR2, which is calculated with the formula:
++ * SPI_CLK = MOD_CLK / (2 * (cdr + 1))
++ * Wether we use the former or the latter is set through the
++ * DRS bit.
++ *
++ * First try CDR2, and if we can't reach the expected
++ * frequency, fall back to CDR1.
++ */
++ div_cdr1 = DIV_ROUND_UP(mclk_rate, tfr->speed_hz);
++ div_cdr2 = DIV_ROUND_UP(div_cdr1, 2);
++ if (div_cdr2 <= (SUN6I_CLK_CTL_CDR2_MASK + 1)) {
++ reg = SUN6I_CLK_CTL_CDR2(div_cdr2 - 1) | SUN6I_CLK_CTL_DRS;
++ tfr->effective_speed_hz = mclk_rate / (2 * div_cdr2);
++ } else {
++ div = min(SUN6I_CLK_CTL_CDR1_MASK, order_base_2(div_cdr1));
++ reg = SUN6I_CLK_CTL_CDR1(div);
++ tfr->effective_speed_hz = mclk_rate / (1 << div);
++ }
++ sun6i_spi_write(sspi, SUN6I_CLK_CTL_REG, reg);
+ } else {
+- div = min(SUN6I_CLK_CTL_CDR1_MASK, order_base_2(div_cdr1));
+- reg = SUN6I_CLK_CTL_CDR1(div);
+- tfr->effective_speed_hz = mclk_rate / (1 << div);
++ clk_set_rate(sspi->mclk, tfr->speed_hz);
++ mclk_rate = clk_get_rate(sspi->mclk);
++ tfr->effective_speed_hz = mclk_rate;
+ }
+
+- sun6i_spi_write(sspi, SUN6I_CLK_CTL_REG, reg);
+ /* Finally enable the bus - doing so before might raise SCK to HIGH */
+ reg = sun6i_spi_read(sspi, SUN6I_GBL_CTL_REG);
+ reg |= SUN6I_GBL_CTL_BUS_ENABLE;
+@@ -518,6 +527,7 @@ static int sun6i_spi_runtime_resume(stru
+ struct spi_master *master = dev_get_drvdata(dev);
+ struct sun6i_spi *sspi = spi_master_get_devdata(master);
+ int ret;
++ u32 reg;
+
+ ret = clk_prepare_enable(sspi->hclk);
+ if (ret) {
+@@ -537,8 +547,10 @@ static int sun6i_spi_runtime_resume(stru
+ goto err2;
+ }
+
+- sun6i_spi_write(sspi, SUN6I_GBL_CTL_REG,
+- SUN6I_GBL_CTL_MASTER | SUN6I_GBL_CTL_TP);
++ reg = SUN6I_GBL_CTL_MASTER | SUN6I_GBL_CTL_TP;
++ if (sspi->quirks->has_new_sample_mode)
++ reg |= SUN6I_GBL_CTL_SAMPLE_MODE;
++ sun6i_spi_write(sspi, SUN6I_GBL_CTL_REG, reg);
+
+ return 0;
+
+@@ -729,15 +741,23 @@ static int sun6i_spi_remove(struct platf
+
+ static const struct sun6i_spi_quirks sun6i_a31_spi_quirks = {
+ .fifo_depth = SUN6I_FIFO_DEPTH,
++ .has_divider = true,
+ };
+
+ static const struct sun6i_spi_quirks sun8i_h3_spi_quirks = {
+ .fifo_depth = SUN8I_FIFO_DEPTH,
++ .has_divider = true,
++};
++
++static const struct sun6i_spi_quirks sun50i_r329_spi_quirks = {
++ .fifo_depth = SUN8I_FIFO_DEPTH,
++ .has_new_sample_mode = true,
+ };
+
+ static const struct of_device_id sun6i_spi_match[] = {
+ { .compatible = "allwinner,sun6i-a31-spi", .data = &sun6i_a31_spi_quirks },
+ { .compatible = "allwinner,sun8i-h3-spi", .data = &sun8i_h3_spi_quirks },
++ { .compatible = "allwinner,sun50i-r329-spi", .data = &sun50i_r329_spi_quirks },
+ {}
+ };
+ MODULE_DEVICE_TABLE(of, sun6i_spi_match);
--- /dev/null
+From b300b013de16109f833782d9f4e7ee8cc204780f Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sat, 17 Jul 2021 11:19:29 -0500
+Subject: [PATCH 077/117] spi: spi-sun6i: Dual/Quad RX Support
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ drivers/spi/spi-sun6i.c | 17 +++++++++++++++--
+ 1 file changed, 15 insertions(+), 2 deletions(-)
+
+--- a/drivers/spi/spi-sun6i.c
++++ b/drivers/spi/spi-sun6i.c
+@@ -82,6 +82,8 @@
+ #define SUN6I_XMIT_CNT_REG 0x34
+
+ #define SUN6I_BURST_CTL_CNT_REG 0x38
++#define SUN6I_BURST_CTL_CNT_QUAD_EN BIT(29)
++#define SUN6I_BURST_CTL_CNT_DUAL_EN BIT(28)
+
+ #define SUN6I_TXDATA_REG 0x200
+ #define SUN6I_RXDATA_REG 0x300
+@@ -415,7 +417,17 @@ static int sun6i_spi_transfer_one(struct
+ /* Setup the counters */
+ sun6i_spi_write(sspi, SUN6I_BURST_CNT_REG, tfr->len);
+ sun6i_spi_write(sspi, SUN6I_XMIT_CNT_REG, tx_len);
+- sun6i_spi_write(sspi, SUN6I_BURST_CTL_CNT_REG, tx_len);
++
++ reg = tx_len;
++ switch (tfr->rx_nbits) {
++ case SPI_NBITS_QUAD:
++ reg |= SUN6I_BURST_CTL_CNT_QUAD_EN;
++ break;
++ case SPI_NBITS_DUAL:
++ reg |= SUN6I_BURST_CTL_CNT_DUAL_EN;
++ break;
++ }
++ sun6i_spi_write(sspi, SUN6I_BURST_CTL_CNT_REG, reg);
+
+ if (!use_dma) {
+ /* Fill the TX FIFO */
+@@ -632,7 +644,8 @@ static int sun6i_spi_probe(struct platfo
+ master->set_cs = sun6i_spi_set_cs;
+ master->transfer_one = sun6i_spi_transfer_one;
+ master->num_chipselect = 4;
+- master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST;
++ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST
++ | SPI_RX_DUAL | SPI_RX_QUAD;
+ master->bits_per_word_mask = SPI_BPW_MASK(8);
+ master->dev.of_node = pdev->dev.of_node;
+ master->auto_runtime_pm = true;
--- /dev/null
+From aaabd3cf8c041b5122ca252f51fa616833e18749 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Thu, 11 Aug 2022 00:54:01 -0500
+Subject: [PATCH 078/117] riscv: dts: allwinner: Add SPI support
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ .../dts/allwinner/sun20i-d1-lichee-rv.dts | 6 +++
+ .../boot/dts/allwinner/sun20i-d1-nezha.dts | 44 ++++++++++++++++
+ arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi | 51 +++++++++++++++++++
+ 3 files changed, 101 insertions(+)
+
+--- a/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv.dts
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv.dts
+@@ -65,6 +65,12 @@
+ status = "okay";
+ };
+
++&spi0 {
++ pinctrl-0 = <&spi0_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++};
++
+ &uart0 {
+ pinctrl-0 = <&uart0_pb8_pins>;
+ pinctrl-names = "default";
+--- a/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
+@@ -19,6 +19,7 @@
+ ethernet1 = &xr829;
+ mmc0 = &mmc0;
+ serial0 = &uart0;
++ spi0 = &spi0;
+ };
+
+ chosen {
+@@ -157,6 +158,49 @@
+ pinctrl-names = "default";
+ status = "okay";
+ };
++
++&spi0 {
++ pinctrl-0 = <&spi0_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++
++ flash@0 {
++ compatible = "spi-nand";
++ reg = <0>;
++
++ partitions {
++ compatible = "fixed-partitions";
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ partition@0 {
++ label = "boot0";
++ reg = <0x00000000 0x00100000>;
++ };
++
++ partition@100000 {
++ label = "uboot";
++ reg = <0x00100000 0x00300000>;
++ };
++
++ partition@400000 {
++ label = "secure_storage";
++ reg = <0x00400000 0x00100000>;
++ };
++
++ partition@500000 {
++ label = "sys";
++ reg = <0x00500000 0x0fb00000>;
++ };
++ };
++ };
++};
++
++&spi1 {
++ pinctrl-0 = <&spi1_pd_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++};
+
+ &uart0 {
+ pinctrl-0 = <&uart0_pb8_pins>;
+--- a/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
+@@ -179,6 +179,24 @@
+ };
+
+ /omit-if-no-ref/
++ spi0_pins: spi0-pins {
++ pins = "PC2", "PC3", "PC4", "PC5", "PC6", "PC7";
++ function = "spi0";
++ };
++
++ /omit-if-no-ref/
++ spi1_pb_pins: spi1-pb-pins {
++ pins = "PB0", "PB8", "PB9", "PB10", "PB11", "PB12";
++ function = "spi1";
++ };
++
++ /omit-if-no-ref/
++ spi1_pd_pins: spi1-pd-pins {
++ pins = "PD10", "PD11", "PD12", "PD13", "PD14", "PD15";
++ function = "spi1";
++ };
++
++ /omit-if-no-ref/
+ uart0_pb8_pins: uart0-pb8-pins {
+ pins = "PB8", "PB9";
+ function = "uart0";
+@@ -631,6 +649,39 @@
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
++ };
++
++ spi0: spi@4025000 {
++ compatible = "allwinner,sun20i-d1-spi",
++ "allwinner,sun50i-r329-spi";
++ reg = <0x4025000 0x1000>;
++ interrupts = <31 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
++ clock-names = "ahb", "mod";
++ resets = <&ccu RST_BUS_SPI0>;
++ dmas = <&dma 22>, <&dma 22>;
++ dma-names = "rx", "tx";
++ num-cs = <1>;
++ status = "disabled";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ };
++
++ spi1: spi@4026000 {
++ compatible = "allwinner,sun20i-d1-spi-dbi",
++ "allwinner,sun50i-r329-spi-dbi",
++ "allwinner,sun50i-r329-spi";
++ reg = <0x4026000 0x1000>;
++ interrupts = <32 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
++ clock-names = "ahb", "mod";
++ resets = <&ccu RST_BUS_SPI1>;
++ dmas = <&dma 23>, <&dma 23>;
++ dma-names = "rx", "tx";
++ num-cs = <1>;
++ status = "disabled";
++ #address-cells = <1>;
++ #size-cells = <0>;
+ };
+
+ usb_otg: usb@4100000 {
--- /dev/null
+From 68c6f452bf42d6c5cbaf40537d8a17a7f3f5481e Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sun, 6 Jun 2021 10:03:12 -0500
+Subject: [PATCH 079/117] dt-bindings: thermal: sun8i: Add compatible for D1
+
+D1 contains a thermal sensor similar to other Allwinner SoCs. Like the
+H3 variant, it contains only one channel.
+
+D1's thermal sensor gets a reference voltage from AVCC. This may always
+have been the case; it is explicitly documented in the SoC user manuals
+since at least H616. However, it was not as important on earlier SoCs,
+because those reference designs foreced AVCC always-on by connecting it
+to the PLL power supply.
+
+Now, since D1 only uses AVCC for other optional peripherals, this supply
+could be turned off at runtime, so it must be made explicit in the DTS.
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ .../thermal/allwinner,sun8i-a83t-ths.yaml | 21 ++++++++++++++++++-
+ 1 file changed, 20 insertions(+), 1 deletion(-)
+
+--- a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
++++ b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
+@@ -16,6 +16,7 @@ properties:
+ - allwinner,sun8i-a83t-ths
+ - allwinner,sun8i-h3-ths
+ - allwinner,sun8i-r40-ths
++ - allwinner,sun20i-d1-ths
+ - allwinner,sun50i-a64-ths
+ - allwinner,sun50i-a100-ths
+ - allwinner,sun50i-h5-ths
+@@ -55,6 +56,10 @@ properties:
+ - 0
+ - 1
+
++ vref-supply:
++ description:
++ Regulator for the analog reference voltage
++
+ allOf:
+ - if:
+ properties:
+@@ -84,7 +89,9 @@ allOf:
+ properties:
+ compatible:
+ contains:
+- const: allwinner,sun8i-h3-ths
++ enum:
++ - allwinner,sun8i-h3-ths
++ - allwinner,sun20i-d1-ths
+
+ then:
+ properties:
+@@ -103,6 +110,7 @@ allOf:
+ enum:
+ - allwinner,sun8i-h3-ths
+ - allwinner,sun8i-r40-ths
++ - allwinner,sun20i-d1-ths
+ - allwinner,sun50i-a64-ths
+ - allwinner,sun50i-a100-ths
+ - allwinner,sun50i-h5-ths
+@@ -114,6 +122,17 @@ allOf:
+ - clock-names
+ - resets
+
++ - if:
++ properties:
++ compatible:
++ contains:
++ enum:
++ - allwinner,sun20i-d1-ths
++
++ then:
++ required:
++ - vref-supply
++
+ required:
+ - compatible
+ - reg
--- /dev/null
+From c225b48d2cf5f5a824b5b0a4144511bdc5f65ab5 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sun, 14 Aug 2022 11:18:11 -0500
+Subject: [PATCH 080/117] riscv: dts: allwinner: d1: Add thermal sensor and
+ zone
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ .../sun20i-d1-common-regulators.dtsi | 4 ++
+ arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi | 41 +++++++++++++++++++
+ 2 files changed, 45 insertions(+)
+
+--- a/arch/riscv/boot/dts/allwinner/sun20i-d1-common-regulators.dtsi
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-common-regulators.dtsi
+@@ -49,3 +49,7 @@
+ regulator-max-microvolt = <1800000>;
+ ldo-in-supply = <®_vcc_3v3>;
+ };
++
++&ths {
++ vref-supply = <®_aldo>;
++};
+--- a/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
+@@ -59,6 +59,35 @@
+ #clock-cells = <0>;
+ };
+
++ thermal-zones {
++ cpu-thermal {
++ polling-delay = <0>;
++ polling-delay-passive = <0>;
++ thermal-sensors = <&ths>;
++
++ trips {
++ cpu_target: cpu-target {
++ hysteresis = <3000>;
++ temperature = <85000>;
++ type = "passive";
++ };
++
++ cpu-crit {
++ hysteresis = <0>;
++ temperature = <110000>;
++ type = "critical";
++ };
++ };
++
++ cooling-maps {
++ map0 {
++ trip = <&cpu_target>;
++ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
++ };
++ };
++ };
++ };
++
+ soc {
+ compatible = "simple-bus";
+ ranges;
+@@ -252,6 +281,18 @@
+ #size-cells = <0>;
+ };
+
++ ths: temperature-sensor@2009400 {
++ compatible = "allwinner,sun20i-d1-ths";
++ reg = <0x2009400 0x400>;
++ interrupts = <74 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_THS>, <&osc24M>;
++ clock-names = "bus", "mod";
++ resets = <&ccu RST_BUS_THS>;
++ nvmem-cells = <&ths_calib>;
++ nvmem-cell-names = "calibration";
++ #thermal-sensor-cells = <0>;
++ };
++
+ lradc: keys@2009800 {
+ compatible = "allwinner,sun20i-d1-lradc",
+ "allwinner,sun50i-r329-lradc";
--- /dev/null
+From 9b6a07cacab9300c261b1f7e25857f96cfeae9cf Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sat, 12 Jun 2021 23:42:48 -0500
+Subject: [PATCH 081/117] ASoC: sun20i-codec: New driver for D1 internal codec
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ sound/soc/sunxi/Kconfig | 6 +
+ sound/soc/sunxi/Makefile | 1 +
+ sound/soc/sunxi/sun20i-codec.c | 886 +++++++++++++++++++++++++++++++++
+ 3 files changed, 893 insertions(+)
+ create mode 100644 sound/soc/sunxi/sun20i-codec.c
+
+--- a/sound/soc/sunxi/Kconfig
++++ b/sound/soc/sunxi/Kconfig
+@@ -30,6 +30,12 @@ config SND_SUN8I_CODEC_ANALOG
+ Say Y or M if you want to add support for the analog controls for
+ the codec embedded in newer Allwinner SoCs.
+
++config SND_SUN20I_CODEC
++ tristate "Allwinner D1 (sun20i) Audio Codec"
++ depends on ARCH_SUNXI || COMPILE_TEST
++ help
++ Say Y or M to add support for the audio codec in Allwinner D1 SoC.
++
+ config SND_SUN50I_CODEC_ANALOG
+ tristate "Allwinner sun50i Codec Analog Controls Support"
+ depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
+--- a/sound/soc/sunxi/Makefile
++++ b/sound/soc/sunxi/Makefile
+@@ -3,6 +3,7 @@ obj-$(CONFIG_SND_SUN4I_CODEC) += sun4i-c
+ obj-$(CONFIG_SND_SUN4I_I2S) += sun4i-i2s.o
+ obj-$(CONFIG_SND_SUN4I_SPDIF) += sun4i-spdif.o
+ obj-$(CONFIG_SND_SUN8I_CODEC_ANALOG) += sun8i-codec-analog.o
++obj-$(CONFIG_SND_SUN20I_CODEC) += sun20i-codec.o
+ obj-$(CONFIG_SND_SUN50I_CODEC_ANALOG) += sun50i-codec-analog.o
+ obj-$(CONFIG_SND_SUN8I_CODEC) += sun8i-codec.o
+ obj-$(CONFIG_SND_SUN8I_ADDA_PR_REGMAP) += sun8i-adda-pr-regmap.o
+--- /dev/null
++++ b/sound/soc/sunxi/sun20i-codec.c
+@@ -0,0 +1,886 @@
++// SPDX-License-Identifier: GPL-2.0+
++
++#include <linux/clk.h>
++#include <linux/io.h>
++#include <linux/module.h>
++#include <linux/of.h>
++#include <linux/platform_device.h>
++#include <linux/regmap.h>
++#include <linux/reset.h>
++
++#include <sound/dmaengine_pcm.h>
++#include <sound/pcm_params.h>
++#include <sound/simple_card_utils.h>
++#include <sound/soc.h>
++#include <sound/soc-dai.h>
++#include <sound/soc-dapm.h>
++#include <sound/tlv.h>
++
++#define SUN20I_CODEC_DAC_DPC 0x0000
++#define SUN20I_CODEC_DAC_DPC_EN_DA 31
++#define SUN20I_CODEC_DAC_DPC_HPF_EN 18
++#define SUN20I_CODEC_DAC_DPC_DVOL 12
++#define SUN20I_CODEC_DAC_VOL_CTRL 0x0004
++#define SUN20I_CODEC_DAC_VOL_CTRL_DAC_VOL_SEL 16
++#define SUN20I_CODEC_DAC_VOL_CTRL_DAC_VOL_L 8
++#define SUN20I_CODEC_DAC_VOL_CTRL_DAC_VOL_R 0
++#define SUN20I_CODEC_DAC_FIFOC 0x0010
++#define SUN20I_CODEC_DAC_FIFOC_FS 29
++#define SUN20I_CODEC_DAC_FIFOC_FIFO_MODE 24
++#define SUN20I_CODEC_DAC_FIFOC_DRQ_CLR_CNT 21
++#define SUN20I_CODEC_DAC_FIFOC_TRIG_LEVEL 8
++#define SUN20I_CODEC_DAC_FIFOC_MONO_EN 6
++#define SUN20I_CODEC_DAC_FIFOC_SAMPLE_BITS 5
++#define SUN20I_CODEC_DAC_FIFOC_DRQ_EN 4
++#define SUN20I_CODEC_DAC_FIFOC_FIFO_FLUSH 0
++#define SUN20I_CODEC_DAC_TXDATA 0x0020
++#define SUN20I_CODEC_DAC_DEBUG 0x0028
++#define SUN20I_CODEC_DAC_DEBUG_DA_SWP 6
++#define SUN20I_CODEC_DAC_ADDA_LOOP_MODE 0
++
++#define SUN20I_CODEC_ADC_FIFOC 0x0030
++#define SUN20I_CODEC_ADC_FIFOC_FS 29
++#define SUN20I_CODEC_ADC_FIFOC_EN_AD 28
++#define SUN20I_CODEC_ADC_FIFOC_FIFO_MODE 24
++#define SUN20I_CODEC_ADC_FIFOC_SAMPLE_BITS 16
++#define SUN20I_CODEC_ADC_FIFOC_TRIG_LEVEL 4
++#define SUN20I_CODEC_ADC_FIFOC_DRQ_EN 3
++#define SUN20I_CODEC_ADC_FIFOC_FIFO_FLUSH 0
++#define SUN20I_CODEC_ADC_VOL_CTRL 0x0034
++#define SUN20I_CODEC_ADC_VOL_CTRL_ADC3_VOL 16
++#define SUN20I_CODEC_ADC_VOL_CTRL_ADC2_VOL 8
++#define SUN20I_CODEC_ADC_VOL_CTRL_ADC1_VOL 0
++#define SUN20I_CODEC_ADC_RXDATA 0x0040
++#define SUN20I_CODEC_ADC_DEBUG 0x004c
++#define SUN20I_CODEC_ADC_DEBUG_AD_SWP1 24
++#define SUN20I_CODEC_ADC_DIG_CTRL 0x0050
++#define SUN20I_CODEC_ADC_DIG_CTRL_ADC_VOL_EN 16
++#define SUN20I_CODEC_ADC_DIG_CTRL_ADC_EN 0
++
++#define SUN20I_CODEC_DAC_DAP_CTRL 0x00f0
++#define SUN20I_CODEC_DAC_DAP_CTRL_DAP_EN 31
++#define SUN20I_CODEC_DAC_DAP_CTRL_DAP_DRC_EN 29
++#define SUN20I_CODEC_DAC_DAP_CTRL_DAP_HPF_EN 28
++
++#define SUN20I_CODEC_ADC_DAP_CTRL 0x00f8
++#define SUN20I_CODEC_ADC_DAP_CTRL_DAP0_EN 31
++#define SUN20I_CODEC_ADC_DAP_CTRL_DAP0_DRC_EN 29
++#define SUN20I_CODEC_ADC_DAP_CTRL_DAP0_HPF_EN 28
++#define SUN20I_CODEC_ADC_DAP_CTRL_DAP1_EN 27
++#define SUN20I_CODEC_ADC_DAP_CTRL_DAP1_DRC_EN 25
++#define SUN20I_CODEC_ADC_DAP_CTRL_DAP1_HPF_EN 24
++
++#define SUN20I_CODEC_ADC1 0x0300
++#define SUN20I_CODEC_ADC1_ADC1_EN 31
++#define SUN20I_CODEC_ADC1_MICIN1_PGA_EN 30
++#define SUN20I_CODEC_ADC1_ADC1_DITHER_EN 29
++#define SUN20I_CODEC_ADC1_MICIN1_SIN_EN 28
++#define SUN20I_CODEC_ADC1_FMINL_EN 27
++#define SUN20I_CODEC_ADC1_FMINL_GAIN 26
++#define SUN20I_CODEC_ADC1_DITHER_LEVEL 24
++#define SUN20I_CODEC_ADC1_LINEINL_EN 23
++#define SUN20I_CODEC_ADC1_LINEINL_GAIN 22
++#define SUN20I_CODEC_ADC1_ADC1_PGA_GAIN 8
++#define SUN20I_CODEC_ADC2 0x0304
++#define SUN20I_CODEC_ADC2_ADC2_EN 31
++#define SUN20I_CODEC_ADC2_MICIN2_PGA_EN 30
++#define SUN20I_CODEC_ADC2_ADC2_DITHER_EN 29
++#define SUN20I_CODEC_ADC2_MICIN2_SIN_EN 28
++#define SUN20I_CODEC_ADC2_FMINR_EN 27
++#define SUN20I_CODEC_ADC2_FMINR_GAIN 26
++#define SUN20I_CODEC_ADC2_DITHER_LEVEL 24
++#define SUN20I_CODEC_ADC2_LINEINR_EN 23
++#define SUN20I_CODEC_ADC2_LINEINR_GAIN 22
++#define SUN20I_CODEC_ADC2_ADC2_PGA_GAIN 8
++#define SUN20I_CODEC_ADC3 0x0308
++#define SUN20I_CODEC_ADC3_ADC3_EN 31
++#define SUN20I_CODEC_ADC3_MICIN3_PGA_EN 30
++#define SUN20I_CODEC_ADC3_ADC3_DITHER_EN 29
++#define SUN20I_CODEC_ADC3_MICIN3_SIN_EN 28
++#define SUN20I_CODEC_ADC3_DITHER_LEVEL 24
++#define SUN20I_CODEC_ADC3_ADC3_PGA_GAIN 8
++
++#define SUN20I_CODEC_DAC 0x0310
++#define SUN20I_CODEC_DAC_DACL_EN 15
++#define SUN20I_CODEC_DAC_DACR_EN 14
++#define SUN20I_CODEC_DAC_LINEOUTL_EN 13
++#define SUN20I_CODEC_DAC_LMUTE 12
++#define SUN20I_CODEC_DAC_LINEOUTR_EN 11
++#define SUN20I_CODEC_DAC_RMUTE 10
++#define SUN20I_CODEC_DAC_LINEOUTL_DIFFEN 6
++#define SUN20I_CODEC_DAC_LINEOUTR_DIFFEN 5
++#define SUN20I_CODEC_DAC_LINEOUT_VOL_CTRL 0
++
++#define SUN20I_CODEC_MICBIAS 0x0318
++#define SUN20I_CODEC_MICBIAS_SELDETADCFS 28
++#define SUN20I_CODEC_MICBIAS_SELDETADCDB 26
++#define SUN20I_CODEC_MICBIAS_SELDETADCBF 24
++#define SUN20I_CODEC_MICBIAS_JACKDETEN 23
++#define SUN20I_CODEC_MICBIAS_SELDETADCDY 21
++#define SUN20I_CODEC_MICBIAS_MICADCEN 20
++#define SUN20I_CODEC_MICBIAS_POPFREE 19
++#define SUN20I_CODEC_MICBIAS_DET_MODE 18
++#define SUN20I_CODEC_MICBIAS_AUTOPLEN 17
++#define SUN20I_CODEC_MICBIAS_MICDETPL 16
++#define SUN20I_CODEC_MICBIAS_HMICBIASEN 15
++#define SUN20I_CODEC_MICBIAS_HMICBIASSEL 13
++#define SUN20I_CODEC_MICBIAS_HMIC_CHOPPER_EN 12
++#define SUN20I_CODEC_MICBIAS_HMIC_CHOPPER_CLK 10
++#define SUN20I_CODEC_MICBIAS_MMICBIASEN 7
++#define SUN20I_CODEC_MICBIAS_MMICBIASSEL 5
++#define SUN20I_CODEC_MICBIAS_MMIC_CHOPPER_EN 4
++#define SUN20I_CODEC_MICBIAS_MMIC_CHOPPER_CLK 2
++
++/* TODO */
++#define SUN20I_CODEC_RAMP 0x031c
++#define SUN20I_CODEC_RAMP_HP_PULL_OUT_EN 15
++
++#define SUN20I_CODEC_HMIC_CTRL 0x0328
++#define SUN20I_CODEC_HMIC_CTRL_SAMPLE_SELECT 21
++#define SUN20I_CODEC_HMIC_CTRL_MDATA_THRESHOLD 16
++#define SUN20I_CODEC_HMIC_CTRL_SF 14
++#define SUN20I_CODEC_HMIC_CTRL_M 10
++#define SUN20I_CODEC_HMIC_CTRL_N 6
++#define SUN20I_CODEC_HMIC_CTRL_THRESH_DEBOUNCE 3
++#define SUN20I_CODEC_HMIC_CTRL_JACK_OUT_IRQ_EN 2
++#define SUN20I_CODEC_HMIC_CTRL_JACK_IN_IRQ_EN 1
++#define SUN20I_CODEC_HMIC_CTRL_MIC_DET_IRQ_EN 0
++#define SUN20I_CODEC_HMIC_STS 0x032c
++#define SUN20I_CODEC_HMIC_STS_MDATA_DISCARD 13
++#define SUN20I_CODEC_HMIC_STS_HMIC_DATA 8
++#define SUN20I_CODEC_HMIC_STS_JACK_OUT_IRQ 4
++#define SUN20I_CODEC_HMIC_STS_JACK_IN_IRQ 3
++#define SUN20I_CODEC_HMIC_STS_MIC_DET_IRQ 0
++
++#define SUN20I_CODEC_HP2 0x0340
++#define SUN20I_CODEC_HP2_HPFB_BUF_EN 31
++#define SUN20I_CODEC_HP2_HEADPHONE_GAIN 28
++#define SUN20I_CODEC_HP2_HPFB_RES 26
++#define SUN20I_CODEC_HP2_HP_DRVEN 21
++#define SUN20I_CODEC_HP2_HP_DRVOUTEN 20
++#define SUN20I_CODEC_HP2_RSWITCH 19
++#define SUN20I_CODEC_HP2_RAMPEN 18
++#define SUN20I_CODEC_HP2_HPFB_IN_EN 17
++#define SUN20I_CODEC_HP2_RAMP_FINAL_CONTROL 16
++#define SUN20I_CODEC_HP2_RAMP_OUT_EN 15
++#define SUN20I_CODEC_HP2_RAMP_FINAL_STATE_RES 13
++
++/* Not affected by codec bus clock/reset */
++#define SUN20I_CODEC_POWER 0x0348
++#define SUN20I_CODEC_POWER_ALDO_EN_MASK BIT(31)
++#define SUN20I_CODEC_POWER_HPLDO_EN_MASK BIT(30)
++#define SUN20I_CODEC_POWER_ALDO_VOLTAGE_MASK GENMASK(14, 12)
++#define SUN20I_CODEC_POWER_HPLDO_VOLTAGE_MASK GENMASK(10, 8)
++
++#define SUN20I_CODEC_ADC_CUR 0x034c
++
++#define SUN20I_CODEC_PCM_FORMATS (SNDRV_PCM_FMTBIT_S16_LE|\
++ SNDRV_PCM_FMTBIT_S20_LE|\
++ SNDRV_PCM_FMTBIT_S32_LE)
++
++#define DRIVER_NAME "sun20i-codec"
++
++/* snd_soc_register_card() takes over drvdata, so the card must be first! */
++struct sun20i_codec {
++ struct snd_soc_card card;
++ struct snd_soc_dai_link dai_link;
++ struct snd_soc_dai_link_component dlcs[3];
++ struct snd_dmaengine_dai_dma_data dma_data[2];
++
++ struct clk *bus_clk;
++ struct clk *adc_clk;
++ struct clk *dac_clk;
++ struct reset_control *reset;
++};
++
++static int sun20i_codec_dai_probe(struct snd_soc_dai *dai)
++{
++ struct sun20i_codec *codec = snd_soc_dai_get_drvdata(dai);
++
++ snd_soc_dai_init_dma_data(dai,
++ &codec->dma_data[SNDRV_PCM_STREAM_PLAYBACK],
++ &codec->dma_data[SNDRV_PCM_STREAM_CAPTURE]);
++
++ return 0;
++}
++
++static struct clk *sun20i_codec_get_clk(struct snd_pcm_substream *substream,
++ struct snd_soc_dai *dai)
++{
++ struct sun20i_codec *codec = snd_soc_dai_get_drvdata(dai);
++
++ return substream->stream == SNDRV_PCM_STREAM_CAPTURE ?
++ codec->adc_clk : codec->dac_clk;
++}
++
++static const unsigned int sun20i_codec_rates[] = {
++ 7350, 8000, 11025, 12000, 14700, 16000, 22050, 24000,
++ 29400, 32000, 44100, 48000, 88200, 96000, 176400, 192000,
++};
++
++static const struct snd_pcm_hw_constraint_list sun20i_codec_rate_lists[] = {
++ [SNDRV_PCM_STREAM_PLAYBACK] = {
++ .list = sun20i_codec_rates,
++ .count = ARRAY_SIZE(sun20i_codec_rates),
++ },
++ [SNDRV_PCM_STREAM_CAPTURE] = {
++ .list = sun20i_codec_rates,
++ .count = ARRAY_SIZE(sun20i_codec_rates) - 4, /* max 48 kHz */
++ },
++};
++
++static int sun20i_codec_startup(struct snd_pcm_substream *substream,
++ struct snd_soc_dai *dai)
++{
++ const struct snd_pcm_hw_constraint_list *list;
++ int ret;
++
++ list = &sun20i_codec_rate_lists[substream->stream];
++ ret = snd_pcm_hw_constraint_list(substream->runtime, 0,
++ SNDRV_PCM_HW_PARAM_RATE, list);
++ if (ret)
++ return ret;
++
++ ret = clk_prepare_enable(sun20i_codec_get_clk(substream, dai));
++ if (ret)
++ return ret;
++
++ return 0;
++}
++
++static void sun20i_codec_shutdown(struct snd_pcm_substream *substream,
++ struct snd_soc_dai *dai)
++{
++ clk_disable_unprepare(sun20i_codec_get_clk(substream, dai));
++}
++
++static unsigned int sun20i_codec_get_clk_rate(unsigned int sample_rate)
++{
++ return (sample_rate % 4000) ? 22579200 : 24576000;
++}
++
++static const unsigned short sun20i_codec_divisors[] = {
++ 512, 1024, 2048, 128,
++ 768, 1536, 3072, 256,
++};
++
++static int sun20i_codec_get_fs(unsigned int clk_rate, unsigned int sample_rate)
++{
++ unsigned int divisor = clk_rate / sample_rate;
++ int i;
++
++ for (i = 0; i < ARRAY_SIZE(sun20i_codec_divisors); ++i)
++ if (sun20i_codec_divisors[i] == divisor)
++ return i;
++
++ return -EINVAL;
++}
++
++static int sun20i_codec_hw_params(struct snd_pcm_substream *substream,
++ struct snd_pcm_hw_params *params,
++ struct snd_soc_dai *dai)
++{
++ struct sun20i_codec *codec = snd_soc_dai_get_drvdata(dai);
++ struct snd_soc_component *component = dai->component;
++ unsigned int channels = params_channels(params);
++ unsigned int sample_bits = params_width(params);
++ unsigned int sample_rate = params_rate(params);
++ unsigned int clk_rate = sun20i_codec_get_clk_rate(sample_rate);
++ enum dma_slave_buswidth dma_width;
++ unsigned int reg;
++ int ret, val;
++
++ switch (params_physical_width(params)) {
++ case 16:
++ dma_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
++ break;
++ case 32:
++ dma_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
++ break;
++ default:
++ dev_err(dai->dev, "Unsupported physical sample width: %d\n",
++ params_physical_width(params));
++ return -EINVAL;
++ }
++ codec->dma_data[substream->stream].addr_width = dma_width;
++
++ ret = clk_set_rate(sun20i_codec_get_clk(substream, dai),
++ sun20i_codec_get_clk_rate(sample_rate));
++ if (ret)
++ return ret;
++
++ reg = substream->stream == SNDRV_PCM_STREAM_CAPTURE ?
++ SUN20I_CODEC_ADC_FIFOC : SUN20I_CODEC_DAC_FIFOC;
++
++ val = sun20i_codec_get_fs(clk_rate, sample_rate);
++ if (val < 0)
++ return val;
++ snd_soc_component_update_bits(component, reg,
++ 0x7 << SUN20I_CODEC_DAC_FIFOC_FS,
++ val << SUN20I_CODEC_DAC_FIFOC_FS);
++
++ /* Data is at MSB for full 4-byte samples, otherwise at LSB. */
++ val = sample_bits != 32;
++ snd_soc_component_update_bits(component, reg,
++ 0x1 << SUN20I_CODEC_DAC_FIFOC_FIFO_MODE,
++ val << SUN20I_CODEC_DAC_FIFOC_FIFO_MODE);
++
++ if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
++ val = sample_bits > 16;
++ snd_soc_component_update_bits(component, reg,
++ 0x1 << SUN20I_CODEC_ADC_FIFOC_SAMPLE_BITS,
++ val << SUN20I_CODEC_ADC_FIFOC_SAMPLE_BITS);
++
++ val = BIT(channels) - 1;
++ snd_soc_component_update_bits(component, SUN20I_CODEC_ADC_DIG_CTRL,
++ 0xf << SUN20I_CODEC_ADC_DIG_CTRL_ADC_EN,
++ val << SUN20I_CODEC_ADC_DIG_CTRL_ADC_EN);
++ } else {
++ val = sample_bits > 16;
++ snd_soc_component_update_bits(component, reg,
++ 0x1 << SUN20I_CODEC_DAC_FIFOC_SAMPLE_BITS,
++ val << SUN20I_CODEC_DAC_FIFOC_SAMPLE_BITS);
++
++ val = channels == 1;
++ snd_soc_component_update_bits(component, reg,
++ 0x1 << SUN20I_CODEC_DAC_FIFOC_MONO_EN,
++ val << SUN20I_CODEC_DAC_FIFOC_MONO_EN);
++ }
++
++ return 0;
++}
++
++static int sun20i_codec_trigger(struct snd_pcm_substream *substream, int cmd,
++ struct snd_soc_dai *dai)
++{
++ struct snd_soc_component *component = dai->component;
++ unsigned int reg, mask;
++
++ if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
++ reg = SUN20I_CODEC_ADC_FIFOC;
++ mask = BIT(SUN20I_CODEC_ADC_FIFOC_DRQ_EN);
++ } else {
++ reg = SUN20I_CODEC_DAC_FIFOC;
++ mask = BIT(SUN20I_CODEC_DAC_FIFOC_DRQ_EN);
++ }
++
++ switch (cmd) {
++ case SNDRV_PCM_TRIGGER_START:
++ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
++ case SNDRV_PCM_TRIGGER_RESUME:
++ mask |= BIT(SUN20I_CODEC_DAC_FIFOC_FIFO_FLUSH);
++ snd_soc_component_update_bits(component, reg, mask, mask);
++ break;
++ case SNDRV_PCM_TRIGGER_STOP:
++ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
++ case SNDRV_PCM_TRIGGER_SUSPEND:
++ snd_soc_component_update_bits(component, reg, mask, 0);
++ break;
++ default:
++ return -EINVAL;
++ }
++
++ return 0;
++}
++
++static const struct snd_soc_dai_ops sun20i_codec_dai_ops = {
++ .startup = sun20i_codec_startup,
++ .shutdown = sun20i_codec_shutdown,
++ .hw_params = sun20i_codec_hw_params,
++ .trigger = sun20i_codec_trigger,
++};
++
++static struct snd_soc_dai_driver sun20i_codec_dai = {
++ .name = DRIVER_NAME,
++ .probe = sun20i_codec_dai_probe,
++ .ops = &sun20i_codec_dai_ops,
++ .capture = {
++ .stream_name = "Capture",
++ .channels_min = 1,
++ .channels_max = 3, /* ??? */
++ .rates = SNDRV_PCM_RATE_CONTINUOUS,
++ .formats = SUN20I_CODEC_PCM_FORMATS,
++ .sig_bits = 20,
++ },
++ .playback = {
++ .stream_name = "Playback",
++ .channels_min = 1,
++ .channels_max = 2,
++ .rates = SNDRV_PCM_RATE_CONTINUOUS,
++ .formats = SUN20I_CODEC_PCM_FORMATS,
++ .sig_bits = 20,
++ },
++};
++
++static const DECLARE_TLV_DB_SCALE(sun20i_codec_boost_vol_scale, 0, 600, 0);
++static const DECLARE_TLV_DB_SCALE(sun20i_codec_digital_vol_scale, -12000, 75, 1);
++static const DECLARE_TLV_DB_SCALE(sun20i_codec_headphone_vol_scale, -4200, 600, 0);
++/* FIXME */
++static const DECLARE_TLV_DB_SCALE(sun20i_codec_line_out_vol_scale, -4650, 150, 1);
++/* FIXME */
++static const DECLARE_TLV_DB_SCALE(sun20i_codec_pga_vol_scale, 500, 100, 0);
++
++static const char *const sun20i_codec_line_out_mode_enum_text[] = {
++ "Single-Ended", "Differential"
++};
++
++static const SOC_ENUM_DOUBLE_DECL(sun20i_codec_line_out_mode_enum,
++ SUN20I_CODEC_DAC,
++ SUN20I_CODEC_DAC_LINEOUTL_DIFFEN,
++ SUN20I_CODEC_DAC_LINEOUTR_DIFFEN,
++ sun20i_codec_line_out_mode_enum_text);
++
++static const struct snd_kcontrol_new sun20i_codec_controls[] = {
++ /* Digital Controls */
++ SOC_DOUBLE_TLV("DAC Playback Volume",
++ SUN20I_CODEC_DAC_VOL_CTRL,
++ SUN20I_CODEC_DAC_VOL_CTRL_DAC_VOL_L,
++ SUN20I_CODEC_DAC_VOL_CTRL_DAC_VOL_R,
++ 0xc0, 0, sun20i_codec_digital_vol_scale),
++ SOC_SINGLE_TLV("ADC3 Capture Volume",
++ SUN20I_CODEC_ADC_VOL_CTRL,
++ SUN20I_CODEC_ADC_VOL_CTRL_ADC3_VOL,
++ 0xc0, 0, sun20i_codec_digital_vol_scale),
++ SOC_SINGLE_TLV("ADC2 Capture Volume",
++ SUN20I_CODEC_ADC_VOL_CTRL,
++ SUN20I_CODEC_ADC_VOL_CTRL_ADC2_VOL,
++ 0xc0, 0, sun20i_codec_digital_vol_scale),
++ SOC_SINGLE_TLV("ADC1 Capture Volume",
++ SUN20I_CODEC_ADC_VOL_CTRL,
++ SUN20I_CODEC_ADC_VOL_CTRL_ADC1_VOL,
++ 0xc0, 0, sun20i_codec_digital_vol_scale),
++
++ /* Analog Controls */
++ SOC_DOUBLE_R_TLV("FM Capture Volume",
++ SUN20I_CODEC_ADC1,
++ SUN20I_CODEC_ADC2,
++ SUN20I_CODEC_ADC1_FMINL_GAIN,
++ 0x1, 0, sun20i_codec_boost_vol_scale),
++ SOC_DOUBLE_R_TLV("Line In Capture Volume",
++ SUN20I_CODEC_ADC1,
++ SUN20I_CODEC_ADC2,
++ SUN20I_CODEC_ADC1_LINEINL_GAIN,
++ 0x1, 0, sun20i_codec_boost_vol_scale),
++ SOC_ENUM("Line Out Mode Playback Enum",
++ sun20i_codec_line_out_mode_enum),
++ SOC_SINGLE_TLV("Line Out Playback Volume",
++ SUN20I_CODEC_DAC,
++ SUN20I_CODEC_DAC_LINEOUT_VOL_CTRL,
++ 0x1f, 0, sun20i_codec_line_out_vol_scale),
++ SOC_SINGLE_TLV("Headphone Playback Volume",
++ SUN20I_CODEC_HP2,
++ SUN20I_CODEC_HP2_HEADPHONE_GAIN,
++ 0x7, 1, sun20i_codec_headphone_vol_scale),
++};
++
++static const struct snd_kcontrol_new sun20i_codec_line_out_switch =
++ SOC_DAPM_DOUBLE("Line Out Playback Switch",
++ SUN20I_CODEC_DAC,
++ SUN20I_CODEC_DAC_LMUTE,
++ SUN20I_CODEC_DAC_RMUTE, 1, 1);
++
++static const struct snd_kcontrol_new sun20i_codec_hp_switch =
++ SOC_DAPM_SINGLE("Headphone Playback Switch",
++ SUN20I_CODEC_HP2,
++ SUN20I_CODEC_HP2_HP_DRVOUTEN, 1, 0);
++
++static const struct snd_kcontrol_new sun20i_codec_adc12_mixer_controls[] = {
++ /* ADC1 Only */
++ SOC_DAPM_SINGLE("Mic1 Capture Switch",
++ SUN20I_CODEC_ADC1,
++ SUN20I_CODEC_ADC1_MICIN1_SIN_EN, 1, 0),
++ /* Shared */
++ SOC_DAPM_DOUBLE_R("FM Capture Switch",
++ SUN20I_CODEC_ADC1,
++ SUN20I_CODEC_ADC2,
++ SUN20I_CODEC_ADC1_FMINL_EN, 1, 0),
++ /* Shared */
++ SOC_DAPM_DOUBLE_R("Line In Capture Switch",
++ SUN20I_CODEC_ADC1,
++ SUN20I_CODEC_ADC2,
++ SUN20I_CODEC_ADC1_LINEINL_EN, 1, 0),
++ /* ADC2 Only */
++ SOC_DAPM_SINGLE("Mic2 Capture Switch",
++ SUN20I_CODEC_ADC2,
++ SUN20I_CODEC_ADC2_MICIN2_SIN_EN, 1, 0),
++};
++
++static const struct snd_kcontrol_new sun20i_codec_adc3_mixer_controls[] = {
++ SOC_DAPM_SINGLE("Mic3 Capture Switch",
++ SUN20I_CODEC_ADC3,
++ SUN20I_CODEC_ADC3_MICIN3_SIN_EN, 1, 0),
++};
++
++static const struct snd_kcontrol_new sun20i_codec_mic1_volume =
++ SOC_DAPM_SINGLE_TLV("Capture Volume",
++ SUN20I_CODEC_ADC1,
++ SUN20I_CODEC_ADC1_ADC1_PGA_GAIN,
++ 0x1f, 0, sun20i_codec_pga_vol_scale);
++
++static const struct snd_kcontrol_new sun20i_codec_mic2_volume =
++ SOC_DAPM_SINGLE_TLV("Capture Volume",
++ SUN20I_CODEC_ADC2,
++ SUN20I_CODEC_ADC2_ADC2_PGA_GAIN,
++ 0x1f, 0, sun20i_codec_pga_vol_scale);
++
++static const struct snd_kcontrol_new sun20i_codec_mic3_volume =
++ SOC_DAPM_SINGLE_TLV("Capture Volume",
++ SUN20I_CODEC_ADC3,
++ SUN20I_CODEC_ADC3_ADC3_PGA_GAIN,
++ 0x1f, 0, sun20i_codec_pga_vol_scale);
++
++static const struct snd_soc_dapm_widget sun20i_codec_widgets[] = {
++ /* Playback */
++ SND_SOC_DAPM_OUTPUT("LINEOUTL"),
++ SND_SOC_DAPM_OUTPUT("LINEOUTR"),
++
++ SND_SOC_DAPM_SWITCH("LINEOUTL Switch",
++ SUN20I_CODEC_DAC,
++ SUN20I_CODEC_DAC_LINEOUTL_EN, 0,
++ &sun20i_codec_line_out_switch),
++ SND_SOC_DAPM_SWITCH("LINEOUTR Switch",
++ SUN20I_CODEC_DAC,
++ SUN20I_CODEC_DAC_LINEOUTR_EN, 0,
++ &sun20i_codec_line_out_switch),
++
++ SND_SOC_DAPM_OUTPUT("HPOUTL"),
++ SND_SOC_DAPM_OUTPUT("HPOUTR"),
++
++ SND_SOC_DAPM_SWITCH("HPOUTL Switch",
++ SND_SOC_NOPM, 0, 0, &sun20i_codec_hp_switch),
++ SND_SOC_DAPM_SWITCH("HPOUTR Switch",
++ SND_SOC_NOPM, 0, 0, &sun20i_codec_hp_switch),
++ SND_SOC_DAPM_SUPPLY("Headphone Driver",
++ SUN20I_CODEC_HP2,
++ SUN20I_CODEC_HP2_HP_DRVEN, 0, NULL, 0),
++
++ SND_SOC_DAPM_DAC("DACL", NULL,
++ SUN20I_CODEC_DAC,
++ SUN20I_CODEC_DAC_DACL_EN, 0),
++ SND_SOC_DAPM_DAC("DACR", NULL,
++ SUN20I_CODEC_DAC,
++ SUN20I_CODEC_DAC_DACR_EN, 0),
++ SND_SOC_DAPM_SUPPLY("DAC",
++ SUN20I_CODEC_DAC_DPC,
++ SUN20I_CODEC_DAC_DPC_EN_DA, 0, NULL, 0),
++
++ SND_SOC_DAPM_AIF_IN("DACL FIFO", "Playback", 0,
++ SND_SOC_NOPM, 0, 0),
++ SND_SOC_DAPM_AIF_IN("DACR FIFO", "Playback", 1,
++ SND_SOC_NOPM, 0, 0),
++
++ /* Capture */
++ SND_SOC_DAPM_AIF_OUT("ADC1 FIFO", "Capture", 0,
++ SND_SOC_NOPM, 0, 0),
++ SND_SOC_DAPM_AIF_OUT("ADC2 FIFO", "Capture", 1,
++ SND_SOC_NOPM, 0, 0),
++ SND_SOC_DAPM_AIF_OUT("ADC3 FIFO", "Capture", 2,
++ SND_SOC_NOPM, 0, 0),
++
++ SND_SOC_DAPM_ADC("ADC1", NULL,
++ SUN20I_CODEC_ADC1,
++ SUN20I_CODEC_ADC1_ADC1_EN, 0),
++ SND_SOC_DAPM_ADC("ADC2", NULL,
++ SUN20I_CODEC_ADC2,
++ SUN20I_CODEC_ADC2_ADC2_EN, 0),
++ SND_SOC_DAPM_ADC("ADC3", NULL,
++ SUN20I_CODEC_ADC3,
++ SUN20I_CODEC_ADC3_ADC3_EN, 0),
++ SND_SOC_DAPM_SUPPLY("ADC",
++ SUN20I_CODEC_ADC_FIFOC,
++ SUN20I_CODEC_ADC_FIFOC_EN_AD, 0, NULL, 0),
++
++ SND_SOC_DAPM_MIXER_NAMED_CTL("ADC1 Mixer", SND_SOC_NOPM, 0, 0,
++ sun20i_codec_adc12_mixer_controls, 3),
++ SND_SOC_DAPM_MIXER_NAMED_CTL("ADC2 Mixer", SND_SOC_NOPM, 0, 0,
++ sun20i_codec_adc12_mixer_controls + 1, 3),
++ SND_SOC_DAPM_MIXER_NAMED_CTL("ADC3 Mixer", SND_SOC_NOPM, 0, 0,
++ sun20i_codec_adc3_mixer_controls,
++ ARRAY_SIZE(sun20i_codec_adc3_mixer_controls)),
++
++ SND_SOC_DAPM_PGA("Mic1",
++ SUN20I_CODEC_ADC1,
++ SUN20I_CODEC_ADC1_MICIN1_PGA_EN, 0,
++ &sun20i_codec_mic1_volume, 1),
++ SND_SOC_DAPM_PGA("Mic2",
++ SUN20I_CODEC_ADC2,
++ SUN20I_CODEC_ADC2_MICIN2_PGA_EN, 0,
++ &sun20i_codec_mic2_volume, 1),
++ SND_SOC_DAPM_PGA("Mic3",
++ SUN20I_CODEC_ADC3,
++ SUN20I_CODEC_ADC3_MICIN3_PGA_EN, 0,
++ &sun20i_codec_mic3_volume, 1),
++
++ SND_SOC_DAPM_INPUT("MICIN1"),
++ SND_SOC_DAPM_INPUT("MICIN2"),
++ SND_SOC_DAPM_INPUT("MICIN3"),
++
++ SND_SOC_DAPM_INPUT("FMINL"),
++ SND_SOC_DAPM_INPUT("FMINR"),
++
++ SND_SOC_DAPM_INPUT("LINEINL"),
++ SND_SOC_DAPM_INPUT("LINEINR"),
++
++ SND_SOC_DAPM_SUPPLY("HBIAS",
++ SUN20I_CODEC_MICBIAS,
++ SUN20I_CODEC_MICBIAS_HMICBIASEN, 0, NULL, 0),
++ SND_SOC_DAPM_SUPPLY("MBIAS",
++ SUN20I_CODEC_MICBIAS,
++ SUN20I_CODEC_MICBIAS_MMICBIASEN, 0, NULL, 0),
++
++ SND_SOC_DAPM_REGULATOR_SUPPLY("avcc", 0, 0),
++ SND_SOC_DAPM_REGULATOR_SUPPLY("hpvcc", 0, 0),
++ SND_SOC_DAPM_REGULATOR_SUPPLY("vdd33", 0, 0),
++};
++
++static const struct snd_soc_dapm_route sun20i_codec_routes[] = {
++ /* Playback */
++ { "LINEOUTL", NULL, "LINEOUTL Switch" },
++ { "LINEOUTR", NULL, "LINEOUTR Switch" },
++
++ { "LINEOUTL Switch", "Line Out Playback Switch", "DACL" },
++ { "LINEOUTR Switch", "Line Out Playback Switch", "DACR" },
++
++ { "HPOUTL", NULL, "HPOUTL Switch" },
++ { "HPOUTR", NULL, "HPOUTR Switch" },
++
++ { "HPOUTL Switch", "Headphone Playback Switch", "DACL" },
++ { "HPOUTR Switch", "Headphone Playback Switch", "DACR" },
++ { "HPOUTL Switch", NULL, "Headphone Driver" },
++ { "HPOUTR Switch", NULL, "Headphone Driver" },
++ { "Headphone Driver", NULL, "hpvcc" },
++
++ { "DACL", NULL, "DACL FIFO" },
++ { "DACR", NULL, "DACR FIFO" },
++ { "DACL", NULL, "DAC" },
++ { "DACR", NULL, "DAC" },
++ { "DACL", NULL, "avcc" },
++ { "DACR", NULL, "avcc" },
++
++ /* Capture */
++ { "ADC1 FIFO", NULL, "ADC1" },
++ { "ADC2 FIFO", NULL, "ADC2" },
++ { "ADC3 FIFO", NULL, "ADC3" },
++
++ { "ADC1", NULL, "ADC1 Mixer" },
++ { "ADC2", NULL, "ADC2 Mixer" },
++ { "ADC3", NULL, "ADC3 Mixer" },
++ { "ADC1", NULL, "ADC" },
++ { "ADC2", NULL, "ADC" },
++ { "ADC3", NULL, "ADC" },
++ { "ADC1", NULL, "avcc" },
++ { "ADC2", NULL, "avcc" },
++ { "ADC3", NULL, "avcc" },
++
++ { "ADC1 Mixer", "Mic1 Capture Switch", "Mic1" },
++ { "ADC2 Mixer", "Mic2 Capture Switch", "Mic2" },
++ { "ADC3 Mixer", "Mic3 Capture Switch", "Mic3" },
++ { "ADC1 Mixer", "FM Capture Switch", "FMINL" },
++ { "ADC2 Mixer", "FM Capture Switch", "FMINR" },
++ { "ADC1 Mixer", "Line In Capture Switch", "LINEINL" },
++ { "ADC2 Mixer", "Line In Capture Switch", "LINEINR" },
++
++ { "Mic1", NULL, "MICIN1" },
++ { "Mic2", NULL, "MICIN2" },
++ { "Mic3", NULL, "MICIN3" },
++
++ { "HBIAS", NULL, "vdd33" },
++ { "MBIAS", NULL, "vdd33" },
++};
++
++static int sun20i_codec_component_probe(struct snd_soc_component *component)
++{
++ struct sun20i_codec *codec = snd_soc_component_get_drvdata(component);
++ int ret;
++
++ ret = reset_control_deassert(codec->reset);
++ if (ret)
++ return ret;
++
++ ret = clk_prepare_enable(codec->bus_clk);
++ if (ret)
++ goto err_assert_reset;
++
++ /* Enable digital volume control. */
++ snd_soc_component_update_bits(component, SUN20I_CODEC_DAC_VOL_CTRL,
++ 0x1 << SUN20I_CODEC_DAC_VOL_CTRL_DAC_VOL_SEL,
++ 0x1 << SUN20I_CODEC_DAC_VOL_CTRL_DAC_VOL_SEL);
++ snd_soc_component_update_bits(component, SUN20I_CODEC_ADC_DIG_CTRL,
++ 0x3 << SUN20I_CODEC_ADC_DIG_CTRL_ADC_VOL_EN,
++ 0x3 << SUN20I_CODEC_ADC_DIG_CTRL_ADC_VOL_EN);
++
++ return 0;
++
++err_assert_reset:
++ reset_control_assert(codec->reset);
++
++ return ret;
++}
++
++static void sun20i_codec_component_remove(struct snd_soc_component *component)
++{
++ struct sun20i_codec *codec = snd_soc_component_get_drvdata(component);
++
++ clk_disable_unprepare(codec->bus_clk);
++ reset_control_assert(codec->reset);
++}
++
++static const struct snd_soc_component_driver sun20i_codec_component = {
++ .controls = sun20i_codec_controls,
++ .num_controls = ARRAY_SIZE(sun20i_codec_controls),
++ .dapm_widgets = sun20i_codec_widgets,
++ .num_dapm_widgets = ARRAY_SIZE(sun20i_codec_widgets),
++ .dapm_routes = sun20i_codec_routes,
++ .num_dapm_routes = ARRAY_SIZE(sun20i_codec_routes),
++ .probe = sun20i_codec_component_probe,
++ .remove = sun20i_codec_component_remove,
++};
++
++static int sun20i_codec_init_card(struct device *dev,
++ struct sun20i_codec *codec)
++{
++ struct snd_soc_dai_link *dai_link = &codec->dai_link;
++ struct snd_soc_card *card = &codec->card;
++ int ret;
++
++ codec->dlcs[0].of_node = dev->of_node;
++ codec->dlcs[0].dai_name = DRIVER_NAME;
++ codec->dlcs[1].name = "snd-soc-dummy";
++ codec->dlcs[1].dai_name = "snd-soc-dummy-dai";
++ codec->dlcs[2].of_node = dev->of_node;
++
++ dai_link->name = DRIVER_NAME;
++ dai_link->stream_name = DRIVER_NAME;
++ dai_link->cpus = &codec->dlcs[0];
++ dai_link->num_cpus = 1;
++ dai_link->codecs = &codec->dlcs[1];
++ dai_link->num_codecs = 1;
++ dai_link->platforms = &codec->dlcs[2];
++ dai_link->num_platforms = 1;
++
++ card->name = DRIVER_NAME;
++ card->dev = dev;
++ card->owner = THIS_MODULE;
++ card->dai_link = dai_link;
++ card->num_links = 1;
++ card->fully_routed = true;
++
++ ret = snd_soc_of_parse_aux_devs(card, "aux-devs");
++ if (ret)
++ return ret;
++
++ ret = snd_soc_of_parse_pin_switches(card, "pin-switches");
++ if (ret)
++ return ret;
++
++ ret = snd_soc_of_parse_audio_routing(card, "routing");
++ if (ret)
++ return ret;
++
++ ret = snd_soc_of_parse_audio_simple_widgets(card, "widgets");
++ if (ret)
++ return ret;
++
++ return 0;
++}
++
++static const struct regmap_config sun20i_codec_regmap_config = {
++ .reg_bits = 32,
++ .reg_stride = 4,
++ .val_bits = 32,
++ .max_register = SUN20I_CODEC_ADC_CUR,
++};
++
++static int sun20i_codec_probe(struct platform_device *pdev)
++{
++ struct device *dev = &pdev->dev;
++ struct sun20i_codec *codec;
++ struct regmap *regmap;
++ struct resource *res;
++ void __iomem *base;
++ int ret;
++
++ codec = devm_kzalloc(dev, sizeof(*codec), GFP_KERNEL);
++ if (!codec)
++ return -ENOMEM;
++
++ dev_set_drvdata(dev, codec);
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ base = devm_ioremap_resource(dev, res);
++ if (IS_ERR(base))
++ return dev_err_probe(dev, PTR_ERR(base),
++ "Failed to map registers\n");
++
++ regmap = devm_regmap_init_mmio(dev, base,
++ &sun20i_codec_regmap_config);
++ if (IS_ERR(regmap))
++ return dev_err_probe(dev, PTR_ERR(regmap),
++ "Failed to create regmap\n");
++
++ codec->bus_clk = devm_clk_get(dev, "bus");
++ if (IS_ERR(codec->bus_clk))
++ return dev_err_probe(dev, PTR_ERR(codec->bus_clk),
++ "Failed to get bus clock\n");
++
++ codec->adc_clk = devm_clk_get(dev, "adc");
++ if (IS_ERR(codec->adc_clk))
++ return dev_err_probe(dev, PTR_ERR(codec->adc_clk),
++ "Failed to get ADC clock\n");
++
++ codec->dac_clk = devm_clk_get(dev, "dac");
++ if (IS_ERR(codec->dac_clk))
++ return dev_err_probe(dev, PTR_ERR(codec->dac_clk),
++ "Failed to get DAC clock\n");
++
++ codec->reset = devm_reset_control_get_exclusive(dev, NULL);
++ if (IS_ERR(codec->reset))
++ return dev_err_probe(dev, PTR_ERR(codec->reset),
++ "Failed to get reset\n");
++
++ ret = devm_snd_soc_register_component(dev, &sun20i_codec_component,
++ &sun20i_codec_dai, 1);
++ if (ret)
++ return dev_err_probe(dev, ret, "Failed to register component\n");
++
++ codec->dma_data[SNDRV_PCM_STREAM_PLAYBACK].addr =
++ res->start + SUN20I_CODEC_DAC_TXDATA;
++ codec->dma_data[SNDRV_PCM_STREAM_PLAYBACK].maxburst = 8;
++ codec->dma_data[SNDRV_PCM_STREAM_CAPTURE].addr =
++ res->start + SUN20I_CODEC_ADC_RXDATA;
++ codec->dma_data[SNDRV_PCM_STREAM_CAPTURE].maxburst = 8;
++
++ ret = devm_snd_dmaengine_pcm_register(dev, NULL, 0);
++ if (ret)
++ return dev_err_probe(dev, ret, "Failed to register PCM\n");
++
++ ret = sun20i_codec_init_card(dev, codec);
++ if (ret)
++ return dev_err_probe(dev, ret, "Failed to initialize card\n");
++
++ ret = devm_snd_soc_register_card(dev, &codec->card);
++ if (ret)
++ return dev_err_probe(dev, ret, "Failed to register card\n");
++
++ return 0;
++}
++
++static const struct of_device_id sun20i_codec_of_match[] = {
++ { .compatible = "allwinner,sun20i-d1-codec" },
++ {}
++};
++MODULE_DEVICE_TABLE(of, sun20i_codec_of_match);
++
++static struct platform_driver sun20i_codec_driver = {
++ .driver = {
++ .name = DRIVER_NAME,
++ .of_match_table = sun20i_codec_of_match,
++ },
++ .probe = sun20i_codec_probe,
++};
++module_platform_driver(sun20i_codec_driver);
++
++MODULE_DESCRIPTION("Allwinner D1 (sun20i) codec driver");
++MODULE_AUTHOR("Samuel Holland <samuel@sholland.org>");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:sun20i-codec");
--- /dev/null
+From 87a77f803f5038e3fc64f45d5142ea402512029a Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Wed, 23 Jun 2021 21:18:47 -0500
+Subject: [PATCH 082/117] ASoC: sun20i-codec: What is this ramp thing?
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ sound/soc/sunxi/sun20i-codec.c | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/sound/soc/sunxi/sun20i-codec.c
++++ b/sound/soc/sunxi/sun20i-codec.c
+@@ -709,6 +709,10 @@ static int sun20i_codec_component_probe(
+ 0x3 << SUN20I_CODEC_ADC_DIG_CTRL_ADC_VOL_EN,
+ 0x3 << SUN20I_CODEC_ADC_DIG_CTRL_ADC_VOL_EN);
+
++ /* Maaagic... */
++ snd_soc_component_update_bits(component, SUN20I_CODEC_RAMP,
++ BIT(1) | BIT(0), BIT(0));
++
+ return 0;
+
+ err_assert_reset:
--- /dev/null
+From 54b1030c72d74ba6390d62086cbfc6a511f58aa7 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Thu, 11 Aug 2022 00:39:42 -0500
+Subject: [PATCH 083/117] riscv: dts: allwinner: d1: Add sound cards to boards
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ .../sun20i-d1-common-regulators.dtsi | 5 +++++
+ .../sun20i-d1-lichee-rv-86-panel.dtsi | 21 +++++++++++++++++++
+ .../allwinner/sun20i-d1-lichee-rv-dock.dts | 12 +++++++++++
+ .../boot/dts/allwinner/sun20i-d1-nezha.dts | 12 +++++++++++
+ arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi | 13 +++++++++++-
+ 5 files changed, 62 insertions(+), 1 deletion(-)
+
+--- a/arch/riscv/boot/dts/allwinner/sun20i-d1-common-regulators.dtsi
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-common-regulators.dtsi
+@@ -18,6 +18,11 @@
+ };
+ };
+
++&codec {
++ avcc-supply = <®_aldo>;
++ hpvcc-supply = <®_hpldo>;
++};
++
+ &lradc {
+ vref-supply = <®_aldo>;
+ };
+--- a/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel.dtsi
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel.dtsi
+@@ -9,6 +9,12 @@
+ ethernet1 = &xr829;
+ };
+
++ audio_amplifier: audio-amplifier {
++ compatible = "simple-audio-amplifier";
++ enable-gpios = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
++ sound-name-prefix = "Amplifier";
++ };
++
+ dmic_codec: dmic-codec {
+ compatible = "dmic-codec";
+ num-channels = <2>;
+@@ -51,6 +57,21 @@
+ };
+ };
+
++&codec {
++ aux-devs = <&audio_amplifier>;
++ routing = "Internal Speaker", "Amplifier OUTL",
++ "Internal Speaker", "Amplifier OUTR",
++ "Amplifier INL", "HPOUTL",
++ "Amplifier INR", "HPOUTR",
++ "LINEINL", "HPOUTL",
++ "LINEINR", "HPOUTR",
++ "MICIN3", "Internal Microphone",
++ "Internal Microphone", "HBIAS";
++ widgets = "Microphone", "Internal Microphone",
++ "Speaker", "Internal Speaker";
++ status = "okay";
++};
++
+ &dmic {
+ pinctrl-0 = <&dmic_pb11_d0_pin>, <&dmic_pe17_clk_pin>;
+ pinctrl-names = "default";
+--- a/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dts
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dts
+@@ -48,6 +48,18 @@
+ };
+ };
+
++&codec {
++ routing = "Internal Speaker", "HPOUTL",
++ "Internal Speaker", "HPOUTR",
++ "LINEINL", "HPOUTL",
++ "LINEINR", "HPOUTR",
++ "MICIN3", "Internal Microphone",
++ "Internal Microphone", "HBIAS";
++ widgets = "Microphone", "Internal Microphone",
++ "Speaker", "Internal Speaker";
++ status = "okay";
++};
++
+ &dmic {
+ pinctrl-0 = <&dmic_pb11_d0_pin>, <&dmic_pe17_clk_pin>;
+ pinctrl-names = "default";
+--- a/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
+@@ -51,6 +51,18 @@
+ };
+ };
+
++&codec {
++ routing = "Headphone Jack", "HPOUTL",
++ "Headphone Jack", "HPOUTR",
++ "LINEINL", "HPOUTL",
++ "LINEINR", "HPOUTR",
++ "MICIN3", "Headset Microphone",
++ "Headset Microphone", "HBIAS";
++ widgets = "Microphone", "Headset Microphone",
++ "Headphone", "Headphone Jack";
++ status = "okay";
++};
++
+ &cpu0 {
+ cpu-supply = <®_vdd_cpu>;
+ };
+--- a/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
+@@ -312,10 +312,21 @@
+ };
+
+ codec: audio-codec@2030000 {
+- compatible = "simple-mfd", "syscon";
++ compatible = "allwinner,sun20i-d1-codec", "simple-mfd", "syscon";
+ reg = <0x2030000 0x1000>;
++ interrupts = <41 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_AUDIO>,
++ <&ccu CLK_AUDIO_ADC>,
++ <&ccu CLK_AUDIO_DAC>,
++ <&osc24M>,
++ <&rtc CLK_OSC32K>;
++ clock-names = "bus", "adc", "dac", "hosc", "losc";
++ resets = <&ccu RST_BUS_AUDIO>;
++ dmas = <&dma 7>, <&dma 7>;
++ dma-names = "rx", "tx";
+ #address-cells = <1>;
+ #size-cells = <1>;
++ #sound-dai-cells = <0>;
+
+ regulators@2030348 {
+ compatible = "allwinner,sun20i-d1-analog-ldos";
--- /dev/null
+From bae2790f627eb30ec3845167341b108e13328f6f Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sun, 7 Aug 2022 10:46:43 -0500
+Subject: [PATCH 084/117] drm/sun4i: dsi: Allow panel attach before card
+ registration
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 8 ++++----
+ 1 file changed, 4 insertions(+), 4 deletions(-)
+
+--- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
++++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
+@@ -967,13 +967,12 @@ static int sun6i_dsi_attach(struct mipi_
+
+ if (IS_ERR(panel))
+ return PTR_ERR(panel);
+- if (!dsi->drm || !dsi->drm->registered)
+- return -EPROBE_DEFER;
+
+ dsi->panel = panel;
+ dsi->device = device;
+
+- drm_kms_helper_hotplug_event(dsi->drm);
++ if (dsi->drm && dsi->drm->registered)
++ drm_kms_helper_hotplug_event(dsi->drm);
+
+ dev_info(host->dev, "Attached device %s\n", device->name);
+
+@@ -988,7 +987,8 @@ static int sun6i_dsi_detach(struct mipi_
+ dsi->panel = NULL;
+ dsi->device = NULL;
+
+- drm_kms_helper_hotplug_event(dsi->drm);
++ if (dsi->drm && dsi->drm->registered)
++ drm_kms_helper_hotplug_event(dsi->drm);
+
+ return 0;
+ }
--- /dev/null
+From 5755bea969adcb00b102271b0cbaa3002acd7a35 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Wed, 27 Apr 2022 18:50:01 -0500
+Subject: [PATCH 085/117] drm/sun4i: mixer: Remove unused CMA headers
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ drivers/gpu/drm/sun4i/sun8i_mixer.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/gpu/drm/sun4i/sun8i_mixer.c
++++ b/drivers/gpu/drm/sun4i/sun8i_mixer.c
+@@ -17,7 +17,7 @@
+ #include <drm/drm_atomic_helper.h>
+ #include <drm/drm_crtc.h>
+ #include <drm/drm_framebuffer.h>
+-#include <drm/drm_gem_dma_helper.h>
++#include <drm/drm_print.h>
+ #include <drm/drm_probe_helper.h>
+
+ #include "sun4i_drv.h"
--- /dev/null
+From 9a7acb8f03346705d7420a490d95b32309d90e22 Mon Sep 17 00:00:00 2001
+From: Roman Beranek <roman.beranek@prusa3d.com>
+Date: Wed, 25 Nov 2020 13:07:35 +0100
+Subject: [PATCH 086/117] drm/sun4i: decouple TCON_DCLK_DIV value from
+ pll_mipi/dotclock ratio
+
+Observations showed that an actual refresh rate differs from the intended.
+Specifically, in case of 4-lane panels it was reduced by 1/3, and in case of
+2-lane panels by 2/3.
+
+BSP code apparently distinguishes between a `dsi_div` and a 'tcon inner div'.
+While this 'inner' divider is under DSI always 4, the `dsi_div` is defined
+as a number of bits per pixel over a number of DSI lanes. This value is then
+involved in setting the rate of PLL_MIPI.
+
+I couldn't really figure out how to fit this into the dotclock driver,
+so I opted for this hack where the requested rate is adjusted in such a way
+that the sun4i_dotclock driver can remain untouched.
+
+Signed-off-by: Roman Beranek <roman.beranek@prusa3d.com>
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ drivers/gpu/drm/sun4i/sun4i_tcon.c | 44 +++++++++++++++++-------------
+ 1 file changed, 25 insertions(+), 19 deletions(-)
+
+--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
++++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
+@@ -291,18 +291,6 @@ static int sun4i_tcon_get_clk_delay(cons
+ return delay;
+ }
+
+-static void sun4i_tcon0_mode_set_common(struct sun4i_tcon *tcon,
+- const struct drm_display_mode *mode)
+-{
+- /* Configure the dot clock */
+- clk_set_rate(tcon->dclk, mode->crtc_clock * 1000);
+-
+- /* Set the resolution */
+- regmap_write(tcon->regs, SUN4I_TCON0_BASIC0_REG,
+- SUN4I_TCON0_BASIC0_X(mode->crtc_hdisplay) |
+- SUN4I_TCON0_BASIC0_Y(mode->crtc_vdisplay));
+-}
+-
+ static void sun4i_tcon0_mode_set_dithering(struct sun4i_tcon *tcon,
+ const struct drm_connector *connector)
+ {
+@@ -365,12 +353,18 @@ static void sun4i_tcon0_mode_set_cpu(str
+ u8 bpp = mipi_dsi_pixel_format_to_bpp(device->format);
+ u8 lanes = device->lanes;
+ u32 block_space, start_delay;
+- u32 tcon_div;
+
+ tcon->dclk_min_div = SUN6I_DSI_TCON_DIV;
+ tcon->dclk_max_div = SUN6I_DSI_TCON_DIV;
+
+- sun4i_tcon0_mode_set_common(tcon, mode);
++ /* Configure the dot clock */
++ clk_set_rate(tcon->dclk, mode->crtc_clock * 1000
++ * bpp / (lanes * SUN6I_DSI_TCON_DIV));
++
++ /* Set the resolution */
++ regmap_write(tcon->regs, SUN4I_TCON0_BASIC0_REG,
++ SUN4I_TCON0_BASIC0_X(mode->crtc_hdisplay) |
++ SUN4I_TCON0_BASIC0_Y(mode->crtc_vdisplay));
+
+ /* Set dithering if needed */
+ sun4i_tcon0_mode_set_dithering(tcon, sun4i_tcon_get_connector(encoder));
+@@ -394,9 +388,7 @@ static void sun4i_tcon0_mode_set_cpu(str
+ * The datasheet says that this should be set higher than 20 *
+ * pixel cycle, but it's not clear what a pixel cycle is.
+ */
+- regmap_read(tcon->regs, SUN4I_TCON0_DCLK_REG, &tcon_div);
+- tcon_div &= GENMASK(6, 0);
+- block_space = mode->htotal * bpp / (tcon_div * lanes);
++ block_space = mode->htotal * bpp / (SUN6I_DSI_TCON_DIV * lanes);
+ block_space -= mode->hdisplay + 40;
+
+ regmap_write(tcon->regs, SUN4I_TCON0_CPU_TRI0_REG,
+@@ -438,7 +430,14 @@ static void sun4i_tcon0_mode_set_lvds(st
+
+ tcon->dclk_min_div = 7;
+ tcon->dclk_max_div = 7;
+- sun4i_tcon0_mode_set_common(tcon, mode);
++
++ /* Configure the dot clock */
++ clk_set_rate(tcon->dclk, mode->crtc_clock * 1000);
++
++ /* Set the resolution */
++ regmap_write(tcon->regs, SUN4I_TCON0_BASIC0_REG,
++ SUN4I_TCON0_BASIC0_X(mode->crtc_hdisplay) |
++ SUN4I_TCON0_BASIC0_Y(mode->crtc_vdisplay));
+
+ /* Set dithering if needed */
+ sun4i_tcon0_mode_set_dithering(tcon, sun4i_tcon_get_connector(encoder));
+@@ -515,7 +514,14 @@ static void sun4i_tcon0_mode_set_rgb(str
+
+ tcon->dclk_min_div = tcon->quirks->dclk_min_div;
+ tcon->dclk_max_div = 127;
+- sun4i_tcon0_mode_set_common(tcon, mode);
++
++ /* Configure the dot clock */
++ clk_set_rate(tcon->dclk, mode->crtc_clock * 1000);
++
++ /* Set the resolution */
++ regmap_write(tcon->regs, SUN4I_TCON0_BASIC0_REG,
++ SUN4I_TCON0_BASIC0_X(mode->crtc_hdisplay) |
++ SUN4I_TCON0_BASIC0_Y(mode->crtc_vdisplay));
+
+ /* Set dithering if needed */
+ sun4i_tcon0_mode_set_dithering(tcon, connector);
--- /dev/null
+From 9ea0c216d4f85a8ea888a38853e9573bbd9e995a Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sun, 7 Aug 2022 21:09:39 -0500
+Subject: [PATCH 087/117] drm/sun4i: tcon: Always protect the LCD dotclock rate
+
+This handles the case where multiple CRTCs get their .mode_set function
+called during the same atomic commit, before rate protection is applied
+by enabling the CRTC.
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ drivers/gpu/drm/sun4i/sun4i_dotclock.c | 4 ++++
+ drivers/gpu/drm/sun4i/sun4i_tcon.c | 6 ++++--
+ 2 files changed, 8 insertions(+), 2 deletions(-)
+
+--- a/drivers/gpu/drm/sun4i/sun4i_dotclock.c
++++ b/drivers/gpu/drm/sun4i/sun4i_dotclock.c
+@@ -6,6 +6,7 @@
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ */
+
++#include <linux/clk.h>
+ #include <linux/clk-provider.h>
+ #include <linux/regmap.h>
+
+@@ -194,12 +195,15 @@ int sun4i_dclk_create(struct device *dev
+ if (IS_ERR(tcon->dclk))
+ return PTR_ERR(tcon->dclk);
+
++ clk_rate_exclusive_get(tcon->dclk);
++
+ return 0;
+ }
+ EXPORT_SYMBOL(sun4i_dclk_create);
+
+ int sun4i_dclk_free(struct sun4i_tcon *tcon)
+ {
++ clk_rate_exclusive_put(tcon->dclk);
+ clk_unregister(tcon->dclk);
+ return 0;
+ }
+--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
++++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
+@@ -108,9 +108,11 @@ static void sun4i_tcon_channel_set_statu
+
+ if (enabled) {
+ clk_prepare_enable(clk);
+- clk_rate_exclusive_get(clk);
++ if (clk != tcon->dclk)
++ clk_rate_exclusive_get(clk);
+ } else {
+- clk_rate_exclusive_put(clk);
++ if (clk != tcon->dclk)
++ clk_rate_exclusive_put(clk);
+ clk_disable_unprepare(clk);
+ }
+ }
--- /dev/null
+From f792492db1f42c43eb4b8bb72ce573418afc933d Mon Sep 17 00:00:00 2001
+From: Jagan Teki <jagan@amarulasolutions.com>
+Date: Tue, 31 Dec 2019 18:35:24 +0530
+Subject: [PATCH 088/117] drm/sun4i: tcon_top: Register reset, clock gates in
+ probe
+
+TCON TOP is processing clock gates and reset control for
+TV0, TV1 and DSI channels during bind and release the same
+during unbind component ops.
+
+The usual DSI initialization would setup all controller
+clocks along with DPHY clocking during probe.
+
+Since the actual clock gates (along with DSI clock gate)
+are initialized during ton top bind, the DPHY is failed to
+get the DSI clock during that time.
+
+To solve, this circular dependency move the reset control,
+clock gate registration from bind to probe and release the
+same from unbind to remove.
+
+This eventually give a chance DPHY to initialize the DSI
+clock gate.
+
+Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ drivers/gpu/drm/sun4i/sun8i_tcon_top.c | 42 ++++++++++++++------------
+ 1 file changed, 22 insertions(+), 20 deletions(-)
+
+--- a/drivers/gpu/drm/sun4i/sun8i_tcon_top.c
++++ b/drivers/gpu/drm/sun4i/sun8i_tcon_top.c
+@@ -124,14 +124,29 @@ static struct clk_hw *sun8i_tcon_top_reg
+ static int sun8i_tcon_top_bind(struct device *dev, struct device *master,
+ void *data)
+ {
+- struct platform_device *pdev = to_platform_device(dev);
++ return 0;
++}
++
++static void sun8i_tcon_top_unbind(struct device *dev, struct device *master,
++ void *data)
++{
++}
++
++static const struct component_ops sun8i_tcon_top_ops = {
++ .bind = sun8i_tcon_top_bind,
++ .unbind = sun8i_tcon_top_unbind,
++};
++
++static int sun8i_tcon_top_probe(struct platform_device *pdev)
++{
++ struct device *dev = &pdev->dev;
+ struct clk_hw_onecell_data *clk_data;
+ struct sun8i_tcon_top *tcon_top;
+ const struct sun8i_tcon_top_quirks *quirks;
+ void __iomem *regs;
+ int ret, i;
+
+- quirks = of_device_get_match_data(&pdev->dev);
++ quirks = of_device_get_match_data(dev);
+
+ tcon_top = devm_kzalloc(dev, sizeof(*tcon_top), GFP_KERNEL);
+ if (!tcon_top)
+@@ -222,7 +237,7 @@ static int sun8i_tcon_top_bind(struct de
+
+ dev_set_drvdata(dev, tcon_top);
+
+- return 0;
++ return component_add(dev, &sun8i_tcon_top_ops);
+
+ err_unregister_gates:
+ for (i = 0; i < CLK_NUM; i++)
+@@ -235,13 +250,15 @@ err_assert_reset:
+ return ret;
+ }
+
+-static void sun8i_tcon_top_unbind(struct device *dev, struct device *master,
+- void *data)
++static int sun8i_tcon_top_remove(struct platform_device *pdev)
+ {
++ struct device *dev = &pdev->dev;
+ struct sun8i_tcon_top *tcon_top = dev_get_drvdata(dev);
+ struct clk_hw_onecell_data *clk_data = tcon_top->clk_data;
+ int i;
+
++ component_del(dev, &sun8i_tcon_top_ops);
++
+ of_clk_del_provider(dev->of_node);
+ for (i = 0; i < CLK_NUM; i++)
+ if (clk_data->hws[i])
+@@ -249,21 +266,6 @@ static void sun8i_tcon_top_unbind(struct
+
+ clk_disable_unprepare(tcon_top->bus);
+ reset_control_assert(tcon_top->rst);
+-}
+-
+-static const struct component_ops sun8i_tcon_top_ops = {
+- .bind = sun8i_tcon_top_bind,
+- .unbind = sun8i_tcon_top_unbind,
+-};
+-
+-static int sun8i_tcon_top_probe(struct platform_device *pdev)
+-{
+- return component_add(&pdev->dev, &sun8i_tcon_top_ops);
+-}
+-
+-static int sun8i_tcon_top_remove(struct platform_device *pdev)
+-{
+- component_del(&pdev->dev, &sun8i_tcon_top_ops);
+
+ return 0;
+ }
--- /dev/null
+From 03dbb926f6d65f75af902e421c44aeaaf84be66a Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Thu, 11 Aug 2022 22:46:28 -0500
+Subject: [PATCH 089/117] riscv: dts: allwinner: lichee-rv-86-panel-480p: Add
+ panel
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ .../sun20i-d1-lichee-rv-86-panel-480p.dts | 51 +++++++++++++++++++
+ 1 file changed, 51 insertions(+)
+
+--- a/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel-480p.dts
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel-480p.dts
+@@ -7,6 +7,40 @@
+ model = "Sipeed Lichee RV 86 Panel (480p)";
+ compatible = "sipeed,lichee-rv-86-panel-480p", "sipeed,lichee-rv",
+ "allwinner,sun20i-d1";
++
++ backlight: backlight {
++ compatible = "pwm-backlight";
++ power-supply = <®_vcc>;
++ pwms = <&pwm 7 50000 0>;
++ };
++
++ spi {
++ compatible = "spi-gpio";
++ cs-gpios = <&pio 4 14 GPIO_ACTIVE_LOW>; /* PE14 */
++ mosi-gpios = <&pio 4 12 GPIO_ACTIVE_HIGH>; /* PE12 */
++ sck-gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>; /* PE15 */
++ num-chipselects = <1>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ panel@0 {
++ compatible = "sitronix,st7701s";
++ reg = <0>;
++ backlight = <&backlight>;
++ reset-gpios = <&pio 6 13 GPIO_ACTIVE_LOW>; /* PG13 */
++ spi-3wire;
++
++ port {
++ panel_in_tcon_lcd0: endpoint {
++ remote-endpoint = <&tcon_lcd0_out_panel>;
++ };
++ };
++ };
++ };
++};
++
++&de {
++ status = "okay";
+ };
+
+ &i2c2 {
+@@ -27,3 +61,20 @@
+ wakeup-source;
+ };
+ };
++
++&pwm {
++ pinctrl-0 = <&pwm7_pd22_pin>;
++ pinctrl-names = "default";
++ status = "okay";
++};
++
++&tcon_lcd0 {
++ pinctrl-0 = <&lcd_rgb666_pins>;
++ pinctrl-names = "default";
++};
++
++&tcon_lcd0_out {
++ tcon_lcd0_out_panel: endpoint {
++ remote-endpoint = <&panel_in_tcon_lcd0>;
++ };
++};
--- /dev/null
+From 4c72279c90469971ca5ec627a76e50bf51bf076f Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sun, 7 Aug 2022 10:59:29 -0500
+Subject: [PATCH 090/117] riscv: dts: allwinner: d1: Add DSI pipeline
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi | 49 ++++++++++++++++++++
+ 1 file changed, 49 insertions(+)
+
+--- a/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
+@@ -124,6 +124,14 @@
+ #interrupt-cells = <3>;
+
+ /omit-if-no-ref/
++ dsi_4lane_pins: dsi-4lane-pins {
++ pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5",
++ "PD6", "PD7", "PD8", "PD9";
++ drive-strength = <30>;
++ function = "dsi";
++ };
++
++ /omit-if-no-ref/
+ i2c0_pb10_pins: i2c0-pb10-pins {
+ pins = "PB10", "PB11";
+ function = "i2c0";
+@@ -903,6 +911,40 @@
+ };
+ };
+
++ dsi: dsi@5450000 {
++ compatible = "allwinner,sun20i-d1-mipi-dsi",
++ "allwinner,sun50i-a100-mipi-dsi";
++ reg = <0x5450000 0x1000>;
++ interrupts = <108 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_MIPI_DSI>,
++ <&tcon_top CLK_TCON_TOP_DSI>;
++ clock-names = "bus", "mod";
++ resets = <&ccu RST_BUS_MIPI_DSI>;
++ phys = <&dphy>;
++ phy-names = "dphy";
++ status = "disabled";
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port {
++ dsi_in_tcon_lcd0: endpoint {
++ remote-endpoint = <&tcon_lcd0_out_dsi>;
++ };
++ };
++ };
++
++ dphy: phy@5451000 {
++ compatible = "allwinner,sun20i-d1-mipi-dphy",
++ "allwinner,sun50i-a100-mipi-dphy";
++ reg = <0x5451000 0x1000>;
++ interrupts = <108 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_MIPI_DSI>,
++ <&ccu CLK_MIPI_DSI>;
++ clock-names = "bus", "mod";
++ resets = <&ccu RST_BUS_MIPI_DSI>;
++ #phy-cells = <0>;
++ };
++
+ tcon_top: tcon-top@5460000 {
+ compatible = "allwinner,sun20i-d1-tcon-top";
+ reg = <0x5460000 0x1000>;
+@@ -1022,6 +1064,13 @@
+
+ tcon_lcd0_out: port@1 {
+ reg = <1>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ tcon_lcd0_out_dsi: endpoint@1 {
++ reg = <1>;
++ remote-endpoint = <&dsi_in_tcon_lcd0>;
++ };
+ };
+ };
+ };
--- /dev/null
+From 7ac17ab7ea644ec27935865d6d0208ecc7fd4ed9 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Thu, 11 Aug 2022 22:29:03 -0500
+Subject: [PATCH 091/117] riscv: dts: allwinner: devterm: Add DSI panel and
+ backlight
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ .../allwinner/sun20i-d1-clockworkpi-v3.14.dts | 8 +++++++-
+ .../dts/allwinner/sun20i-d1-devterm-v3.14.dts | 20 +++++++++++++++++++
+ 2 files changed, 27 insertions(+), 1 deletion(-)
+
+--- a/arch/riscv/boot/dts/allwinner/sun20i-d1-clockworkpi-v3.14.dts
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-clockworkpi-v3.14.dts
+@@ -48,6 +48,12 @@
+ };
+ };
+
++ backlight: backlight {
++ compatible = "pwm-backlight";
++ power-supply = <®_vcc>;
++ pwms = <&pwm 4 50000 0>; /* PD20/GPIO9 */
++ };
++
+ reg_vdd_cpu: vdd-cpu {
+ compatible = "pwm-regulator";
+ pwms = <&pwm 0 50000 0>;
+@@ -252,7 +258,7 @@
+ };
+
+ &pwm {
+- pinctrl-0 = <&pwm0_pd16_pin>;
++ pinctrl-0 = <&pwm0_pd16_pin>, <&pwm4_pd20_pin>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+--- a/arch/riscv/boot/dts/allwinner/sun20i-d1-devterm-v3.14.dts
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-devterm-v3.14.dts
+@@ -35,3 +35,23 @@
+ };
+ };
+ };
++
++&de {
++ status = "okay";
++};
++
++&dsi {
++ pinctrl-0 = <&dsi_4lane_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++
++ panel@0 {
++ compatible = "clockwork,cwd686";
++ reg = <0>;
++ backlight = <&backlight>;
++ reset-gpios = <&pio 3 19 GPIO_ACTIVE_LOW>; /* PD19/GPIO8 */
++ rotation = <90>;
++ iovcc-supply = <®_dcdc3>;
++ vci-supply = <®_aldo2>;
++ };
++};
--- /dev/null
+From 822fdc3556b688103cdaf7b4b34e98fbe1676425 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sun, 7 Aug 2022 10:58:02 -0500
+Subject: [PATCH 092/117] dt-bindings: display: sun4i-tcon: Add external LVDS
+ PHY
+
+A100 and D1 use the same "combo" PHY for LVDS0 and DSI.
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ .../bindings/display/allwinner,sun4i-a10-tcon.yaml | 7 +++++++
+ 1 file changed, 7 insertions(+)
+
+--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
++++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
+@@ -80,6 +80,13 @@ properties:
+ dmas:
+ maxItems: 1
+
++ phys:
++ maxItems: 1
++
++ phy-names:
++ items:
++ - const: "lvds0"
++
+ resets:
+ anyOf:
+ - items:
--- /dev/null
+From 7d95f6b52ea5f01c9e2414d4984e5a274328c021 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sun, 7 Aug 2022 10:58:57 -0500
+Subject: [PATCH 093/117] riscv: dts: allwinner: d1: Add LVDS0 PHY
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
+@@ -1040,6 +1040,8 @@
+ resets = <&ccu RST_BUS_TCON_LCD0>,
+ <&ccu RST_BUS_LVDS0>;
+ reset-names = "lcd", "lvds";
++ phys = <&dphy>;
++ phy-names = "lvds0";
+ #clock-cells = <0>;
+
+ ports {
--- /dev/null
+From d0f7ed9dc803e09fb6c1e895efbd1182c9212483 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sun, 7 Aug 2022 10:49:30 -0500
+Subject: [PATCH 094/117] dt-bindings: display: sun6i-dsi: Fix clock
+ conditional
+
+The A64 case should have limited maxItems, instead of duplicating the
+minItems value from the main binding. While here, simplify the binding
+by making this an "else" case of the two-clock conditional block.
+
+Fixes: fe5040f2843a ("dt-bindings: sun6i-dsi: Document A64 MIPI-DSI controller")
+Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ .../bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml | 10 ++--------
+ 1 file changed, 2 insertions(+), 8 deletions(-)
+
+--- a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
++++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
+@@ -78,16 +78,10 @@ allOf:
+ required:
+ - clock-names
+
+- - if:
+- properties:
+- compatible:
+- contains:
+- const: allwinner,sun50i-a64-mipi-dsi
+-
+- then:
++ else:
+ properties:
+ clocks:
+- minItems: 1
++ maxItems: 1
+
+ unevaluatedProperties: false
+
--- /dev/null
+From 30abd0e5f27bc57fba7084ba51aca671316b6d24 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sun, 7 Aug 2022 10:50:21 -0500
+Subject: [PATCH 095/117] dt-bindings: display: sun6i-dsi: Add the A100 variant
+
+The "40nm" MIPI DSI controller found in the A100 and D1 SoCs has the
+same register layout as previous SoC integrations. However, its module
+clock now comes from the TCON, which means it no longer runs at a fixed
+rate, so this needs to be distinguished in the driver.
+
+The controller also now uses pins on Port D instead of dedicated pins,
+so it drops the separate power domain.
+
+Commit-notes:
+Removal of the vcc-dsi-supply is maybe a bit questionable. Since there
+is no "VCC-DSI" pin anymore, it's not obvious which pin actually does
+power the DSI controller/PHY. Possibly power comes from VCC-PD or VCC-IO
+or VCC-LVDS. So far, all boards have all of these as always-on supplies,
+so it is hard to test.
+END
+
+Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ .../display/allwinner,sun6i-a31-mipi-dsi.yaml | 28 +++++++++++++++----
+ 1 file changed, 23 insertions(+), 5 deletions(-)
+
+--- a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
++++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
+@@ -12,9 +12,14 @@ maintainers:
+
+ properties:
+ compatible:
+- enum:
+- - allwinner,sun6i-a31-mipi-dsi
+- - allwinner,sun50i-a64-mipi-dsi
++ oneOf:
++ - enum:
++ - allwinner,sun6i-a31-mipi-dsi
++ - allwinner,sun50i-a64-mipi-dsi
++ - allwinner,sun50i-a100-mipi-dsi
++ - items:
++ - const: allwinner,sun20i-d1-mipi-dsi
++ - const: allwinner,sun50i-a100-mipi-dsi
+
+ reg:
+ maxItems: 1
+@@ -59,7 +64,6 @@ required:
+ - phys
+ - phy-names
+ - resets
+- - vcc-dsi-supply
+ - port
+
+ allOf:
+@@ -68,7 +72,9 @@ allOf:
+ properties:
+ compatible:
+ contains:
+- const: allwinner,sun6i-a31-mipi-dsi
++ enum:
++ - allwinner,sun6i-a31-mipi-dsi
++ - allwinner,sun50i-a100-mipi-dsi
+
+ then:
+ properties:
+@@ -83,6 +89,18 @@ allOf:
+ clocks:
+ maxItems: 1
+
++ - if:
++ properties:
++ compatible:
++ contains:
++ enum:
++ - allwinner,sun6i-a31-mipi-dsi
++ - allwinner,sun50i-a64-mipi-dsi
++
++ then:
++ required:
++ - vcc-dsi-supply
++
+ unevaluatedProperties: false
+
+ examples:
--- /dev/null
+From 28e64e830ef487b400b3b943fa3bda83dfb2a937 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Tue, 9 Aug 2022 22:03:42 -0500
+Subject: [PATCH 096/117] drm/sun4i: dsi: Add a variant structure
+
+Replace the ad-hoc calls to of_device_is_compatible() with a structure
+describing the differences between variants. This is in preparation for
+adding more variants to the driver.
+
+Series-changes: 2
+ - Add the variant check to the probe error path
+
+Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 53 +++++++++++++++++---------
+ drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h | 7 ++++
+ 2 files changed, 42 insertions(+), 18 deletions(-)
+
+--- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
++++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
+@@ -1101,12 +1101,16 @@ static const struct component_ops sun6i_
+
+ static int sun6i_dsi_probe(struct platform_device *pdev)
+ {
++ const struct sun6i_dsi_variant *variant;
+ struct device *dev = &pdev->dev;
+- const char *bus_clk_name = NULL;
+ struct sun6i_dsi *dsi;
+ void __iomem *base;
+ int ret;
+
++ variant = device_get_match_data(dev);
++ if (!variant)
++ return -EINVAL;
++
+ dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
+ if (!dsi)
+ return -ENOMEM;
+@@ -1114,10 +1118,7 @@ static int sun6i_dsi_probe(struct platfo
+ dsi->dev = dev;
+ dsi->host.ops = &sun6i_dsi_host_ops;
+ dsi->host.dev = dev;
+-
+- if (of_device_is_compatible(dev->of_node,
+- "allwinner,sun6i-a31-mipi-dsi"))
+- bus_clk_name = "bus";
++ dsi->variant = variant;
+
+ base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(base)) {
+@@ -1142,7 +1143,7 @@ static int sun6i_dsi_probe(struct platfo
+ return PTR_ERR(dsi->regs);
+ }
+
+- dsi->bus_clk = devm_clk_get(dev, bus_clk_name);
++ dsi->bus_clk = devm_clk_get(dev, variant->has_mod_clk ? "bus" : NULL);
+ if (IS_ERR(dsi->bus_clk))
+ return dev_err_probe(dev, PTR_ERR(dsi->bus_clk),
+ "Couldn't get the DSI bus clock\n");
+@@ -1151,21 +1152,21 @@ static int sun6i_dsi_probe(struct platfo
+ if (ret)
+ return ret;
+
+- if (of_device_is_compatible(dev->of_node,
+- "allwinner,sun6i-a31-mipi-dsi")) {
++ if (variant->has_mod_clk) {
+ dsi->mod_clk = devm_clk_get(dev, "mod");
+ if (IS_ERR(dsi->mod_clk)) {
+ dev_err(dev, "Couldn't get the DSI mod clock\n");
+ ret = PTR_ERR(dsi->mod_clk);
+ goto err_attach_clk;
+ }
+- }
+
+- /*
+- * In order to operate properly, that clock seems to be always
+- * set to 297MHz.
+- */
+- clk_set_rate_exclusive(dsi->mod_clk, 297000000);
++ /*
++ * In order to operate properly, the module clock on the
++ * A31 variant always seems to be set to 297MHz.
++ */
++ if (variant->set_mod_clk)
++ clk_set_rate_exclusive(dsi->mod_clk, 297000000);
++ }
+
+ dsi->dphy = devm_phy_get(dev, "dphy");
+ if (IS_ERR(dsi->dphy)) {
+@@ -1191,7 +1192,8 @@ static int sun6i_dsi_probe(struct platfo
+ err_remove_dsi_host:
+ mipi_dsi_host_unregister(&dsi->host);
+ err_unprotect_clk:
+- clk_rate_exclusive_put(dsi->mod_clk);
++ if (dsi->variant->has_mod_clk && dsi->variant->set_mod_clk)
++ clk_rate_exclusive_put(dsi->mod_clk);
+ err_attach_clk:
+ regmap_mmio_detach_clk(dsi->regs);
+
+@@ -1205,16 +1207,31 @@ static int sun6i_dsi_remove(struct platf
+
+ component_del(&pdev->dev, &sun6i_dsi_ops);
+ mipi_dsi_host_unregister(&dsi->host);
+- clk_rate_exclusive_put(dsi->mod_clk);
++ if (dsi->variant->has_mod_clk && dsi->variant->set_mod_clk)
++ clk_rate_exclusive_put(dsi->mod_clk);
+
+ regmap_mmio_detach_clk(dsi->regs);
+
+ return 0;
+ }
+
++static const struct sun6i_dsi_variant sun6i_a31_mipi_dsi_variant = {
++ .has_mod_clk = true,
++ .set_mod_clk = true,
++};
++
++static const struct sun6i_dsi_variant sun50i_a64_mipi_dsi_variant = {
++};
++
+ static const struct of_device_id sun6i_dsi_of_table[] = {
+- { .compatible = "allwinner,sun6i-a31-mipi-dsi" },
+- { .compatible = "allwinner,sun50i-a64-mipi-dsi" },
++ {
++ .compatible = "allwinner,sun6i-a31-mipi-dsi",
++ .data = &sun6i_a31_mipi_dsi_variant,
++ },
++ {
++ .compatible = "allwinner,sun50i-a64-mipi-dsi",
++ .data = &sun50i_a64_mipi_dsi_variant,
++ },
+ { }
+ };
+ MODULE_DEVICE_TABLE(of, sun6i_dsi_of_table);
+--- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h
++++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h
+@@ -15,6 +15,11 @@
+
+ #define SUN6I_DSI_TCON_DIV 4
+
++struct sun6i_dsi_variant {
++ bool has_mod_clk;
++ bool set_mod_clk;
++};
++
+ struct sun6i_dsi {
+ struct drm_connector connector;
+ struct drm_encoder encoder;
+@@ -31,6 +36,8 @@ struct sun6i_dsi {
+ struct mipi_dsi_device *device;
+ struct drm_device *drm;
+ struct drm_panel *panel;
++
++ const struct sun6i_dsi_variant *variant;
+ };
+
+ static inline struct sun6i_dsi *host_to_sun6i_dsi(struct mipi_dsi_host *host)
--- /dev/null
+From 713029c6a33df9218d11593bc5be79420715633f Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sun, 7 Aug 2022 11:06:22 -0500
+Subject: [PATCH 097/117] drm/sun4i: dsi: Add the A100 variant
+
+The A100 variant of the MIPI DSI controller now gets its module clock
+from the TCON via the TCON TOP, so the clock rate cannot be set to a
+fixed value. Otherwise, it appears to be the same as the A31 variant.
+
+Cover-letter:
+drm/sun4i: dsi: Support the A100/D1 controller variant
+This series adds support for the digital part of the DSI controller
+found in the A100 and D1 SoCs (plus T7, which is not supported by
+mainline Linux). There are two changes to the hardware integration:
+ 1) the module clock routes through the TCON TOP, and
+ 2) the separate I/O domain is removed.
+
+The actual register interface appears to be the same as before. The
+register definitions in the D1 BSP exactly match the A64 BSP.
+
+The BSP describes this as the "40nm" DSI controller variant. There is
+also a "28nm" variant with a different register interface; that one is
+found in a different subset of SoCs (V5 and A50).
+
+A100/D1 also come with an updated DPHY, described by the BSP as a
+"combo" PHY, which is now also used for LVDS channel 0. (LVDS and DSI
+share the same pins on Port D.) Since that is a different subsystem,
+I am sending that as a separate series.
+END
+
+Series-to: Chen-Yu Tsai <wens@csie.org>
+Series-to: Jernej Skrabec <jernej.skrabec@gmail.com>
+Series-to: Maxime Ripard <mripard@kernel.org>
+
+Series-version: 2
+
+Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 8 ++++++++
+ 1 file changed, 8 insertions(+)
+
+--- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
++++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
+@@ -1223,6 +1223,10 @@ static const struct sun6i_dsi_variant su
+ static const struct sun6i_dsi_variant sun50i_a64_mipi_dsi_variant = {
+ };
+
++static const struct sun6i_dsi_variant sun50i_a100_mipi_dsi_variant = {
++ .has_mod_clk = true,
++};
++
+ static const struct of_device_id sun6i_dsi_of_table[] = {
+ {
+ .compatible = "allwinner,sun6i-a31-mipi-dsi",
+@@ -1232,6 +1236,10 @@ static const struct of_device_id sun6i_d
+ .compatible = "allwinner,sun50i-a64-mipi-dsi",
+ .data = &sun50i_a64_mipi_dsi_variant,
+ },
++ {
++ .compatible = "allwinner,sun50i-a100-mipi-dsi",
++ .data = &sun50i_a100_mipi_dsi_variant,
++ },
+ { }
+ };
+ MODULE_DEVICE_TABLE(of, sun6i_dsi_of_table);
--- /dev/null
+From b6af4b7f6f75904509747c08e87d91c1bb607bd4 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Thu, 22 Sep 2022 00:39:36 -0500
+Subject: [PATCH 098/117] riscv: Move cast inside kernel_mapping_[pv]a_to_[vp]a
+
+Before commit 44c922572952 ("RISC-V: enable XIP"), these macros cast
+their argument to unsigned long. That commit moved the cast after an
+assignment to an unsigned long variable, rendering it ineffectual.
+Move the cast back, so we can remove the cast at each call site.
+
+Series-to: Palmer Dabbelt <palmer@dabbelt.com>
+Series-to: linux-riscv@lists.infradead.org
+
+Series-version: 2
+
+Reviewed-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
+Reviewed-by: Heiko Stuebner <heiko@sntech.de>
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ arch/riscv/include/asm/page.h | 18 +++++++++---------
+ arch/riscv/mm/init.c | 16 ++++++++--------
+ 2 files changed, 17 insertions(+), 17 deletions(-)
+
+--- a/arch/riscv/include/asm/page.h
++++ b/arch/riscv/include/asm/page.h
+@@ -123,20 +123,20 @@ extern phys_addr_t phys_ram_base;
+ ((x) >= PAGE_OFFSET && (!IS_ENABLED(CONFIG_64BIT) || (x) < PAGE_OFFSET + KERN_VIRT_SIZE))
+
+ #define linear_mapping_pa_to_va(x) ((void *)((unsigned long)(x) + kernel_map.va_pa_offset))
+-#define kernel_mapping_pa_to_va(y) ({ \
+- unsigned long _y = y; \
+- (IS_ENABLED(CONFIG_XIP_KERNEL) && _y < phys_ram_base) ? \
+- (void *)((unsigned long)(_y) + kernel_map.va_kernel_xip_pa_offset) : \
+- (void *)((unsigned long)(_y) + kernel_map.va_kernel_pa_offset + XIP_OFFSET); \
++#define kernel_mapping_pa_to_va(y) ({ \
++ unsigned long _y = (unsigned long)(y); \
++ (IS_ENABLED(CONFIG_XIP_KERNEL) && _y < phys_ram_base) ? \
++ (void *)(_y + kernel_map.va_kernel_xip_pa_offset) : \
++ (void *)(_y + kernel_map.va_kernel_pa_offset + XIP_OFFSET); \
+ })
+ #define __pa_to_va_nodebug(x) linear_mapping_pa_to_va(x)
+
+ #define linear_mapping_va_to_pa(x) ((unsigned long)(x) - kernel_map.va_pa_offset)
+ #define kernel_mapping_va_to_pa(y) ({ \
+- unsigned long _y = y; \
+- (IS_ENABLED(CONFIG_XIP_KERNEL) && _y < kernel_map.virt_addr + XIP_OFFSET) ? \
+- ((unsigned long)(_y) - kernel_map.va_kernel_xip_pa_offset) : \
+- ((unsigned long)(_y) - kernel_map.va_kernel_pa_offset - XIP_OFFSET); \
++ unsigned long _y = (unsigned long)(y); \
++ (IS_ENABLED(CONFIG_XIP_KERNEL) && _y < kernel_map.virt_addr + XIP_OFFSET) ? \
++ (_y - kernel_map.va_kernel_xip_pa_offset) : \
++ (_y - kernel_map.va_kernel_pa_offset - XIP_OFFSET); \
+ })
+
+ #define __va_to_pa_nodebug(x) ({ \
+--- a/arch/riscv/mm/init.c
++++ b/arch/riscv/mm/init.c
+@@ -903,15 +903,15 @@ static void __init pt_ops_set_early(void
+ */
+ static void __init pt_ops_set_fixmap(void)
+ {
+- pt_ops.alloc_pte = kernel_mapping_pa_to_va((uintptr_t)alloc_pte_fixmap);
+- pt_ops.get_pte_virt = kernel_mapping_pa_to_va((uintptr_t)get_pte_virt_fixmap);
++ pt_ops.alloc_pte = kernel_mapping_pa_to_va(alloc_pte_fixmap);
++ pt_ops.get_pte_virt = kernel_mapping_pa_to_va(get_pte_virt_fixmap);
+ #ifndef __PAGETABLE_PMD_FOLDED
+- pt_ops.alloc_pmd = kernel_mapping_pa_to_va((uintptr_t)alloc_pmd_fixmap);
+- pt_ops.get_pmd_virt = kernel_mapping_pa_to_va((uintptr_t)get_pmd_virt_fixmap);
+- pt_ops.alloc_pud = kernel_mapping_pa_to_va((uintptr_t)alloc_pud_fixmap);
+- pt_ops.get_pud_virt = kernel_mapping_pa_to_va((uintptr_t)get_pud_virt_fixmap);
+- pt_ops.alloc_p4d = kernel_mapping_pa_to_va((uintptr_t)alloc_p4d_fixmap);
+- pt_ops.get_p4d_virt = kernel_mapping_pa_to_va((uintptr_t)get_p4d_virt_fixmap);
++ pt_ops.alloc_pmd = kernel_mapping_pa_to_va(alloc_pmd_fixmap);
++ pt_ops.get_pmd_virt = kernel_mapping_pa_to_va(get_pmd_virt_fixmap);
++ pt_ops.alloc_pud = kernel_mapping_pa_to_va(alloc_pud_fixmap);
++ pt_ops.get_pud_virt = kernel_mapping_pa_to_va(get_pud_virt_fixmap);
++ pt_ops.alloc_p4d = kernel_mapping_pa_to_va(alloc_p4d_fixmap);
++ pt_ops.get_p4d_virt = kernel_mapping_pa_to_va(get_p4d_virt_fixmap);
+ #endif
+ }
+
--- /dev/null
+From 20a204b31291befcd583f97dafc0a827f3bc7f00 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Fri, 12 Aug 2022 01:37:16 -0500
+Subject: [PATCH 099/117] dt-bindings: sun6i-a31-mipi-dphy: Add the interrupts
+ property
+
+The sun6i DPHY can generate several interrupts, mostly for reporting
+error conditions, but also for detecting BTA and UPLS sequences.
+Document this capability in order to accurately describe the hardware.
+
+The DPHY has no interrupt number provided in the vendor documentation
+because its interrupt line is shared with the DSI controller.
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ .../bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml
++++ b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml
+@@ -24,6 +24,9 @@ properties:
+ reg:
+ maxItems: 1
+
++ interrupts:
++ maxItems: 1
++
+ clocks:
+ items:
+ - description: Bus Clock
+@@ -53,6 +56,7 @@ required:
+ - "#phy-cells"
+ - compatible
+ - reg
++ - interrupts
+ - clocks
+ - clock-names
+ - resets
--- /dev/null
+From 7d47c62b378a4dbbf3e46a80c7b03966f8964da1 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Fri, 12 Aug 2022 02:24:14 -0500
+Subject: [PATCH 100/117] ARM: dts: sun8i: a33: Add DPHY interrupt
+
+The DPHY has an interrupt line which is shared with the DSI controller.
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ arch/arm/boot/dts/sun8i-a33.dtsi | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/arch/arm/boot/dts/sun8i-a33.dtsi
++++ b/arch/arm/boot/dts/sun8i-a33.dtsi
+@@ -278,6 +278,7 @@
+ dphy: d-phy@1ca1000 {
+ compatible = "allwinner,sun6i-a31-mipi-dphy";
+ reg = <0x01ca1000 0x1000>;
++ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_MIPI_DSI>,
+ <&ccu CLK_DSI_DPHY>;
+ clock-names = "bus", "mod";
--- /dev/null
+From 11d78fce09e80ec246016c19ecc28a724e1e5530 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Fri, 12 Aug 2022 02:25:55 -0500
+Subject: [PATCH 101/117] arm64: dts: allwinner: a64: Add DPHY interrupt
+
+The DPHY has an interrupt line which is shared with the DSI controller.
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+@@ -1199,6 +1199,7 @@
+ compatible = "allwinner,sun50i-a64-mipi-dphy",
+ "allwinner,sun6i-a31-mipi-dphy";
+ reg = <0x01ca1000 0x1000>;
++ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_MIPI_DSI>,
+ <&ccu CLK_DSI_DPHY>;
+ clock-names = "bus", "mod";
--- /dev/null
+From c7fa1be12bf0ef02f5557dd1d1100d25af4e34f5 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sun, 7 Aug 2022 11:00:12 -0500
+Subject: [PATCH 102/117] dt-bindings: sun6i-a31-mipi-dphy: Add the A100 DPHY
+ variant
+
+A100 features an updated DPHY, which moves PLL control inside the DPHY
+register space. (Previously PLL-MIPI was controlled from the CCU. This
+does not affect the "clocks" property because the link between PLL-MIPI
+and the DPHY was never represented in the devicetree.) It also requires
+a modified analog power-on sequence. Finally, the new DPHY adds support
+for operating as an LVDS PHY. D1 uses this same variant.
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ .../bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml
++++ b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml
+@@ -17,9 +17,13 @@ properties:
+ compatible:
+ oneOf:
+ - const: allwinner,sun6i-a31-mipi-dphy
++ - const: allwinner,sun50i-a100-mipi-dphy
+ - items:
+ - const: allwinner,sun50i-a64-mipi-dphy
+ - const: allwinner,sun6i-a31-mipi-dphy
++ - items:
++ - const: allwinner,sun20i-d1-mipi-dphy
++ - const: allwinner,sun50i-a100-mipi-dphy
+
+ reg:
+ maxItems: 1
--- /dev/null
+From 27c0c2cbe7b30b907b031016d2cd15fe9505cb1b Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sun, 7 Aug 2022 12:11:53 -0500
+Subject: [PATCH 103/117] phy: allwinner: phy-sun6i-mipi-dphy: Make RX support
+ optional
+
+While all variants of the DPHY likely support RX mode, the new variant
+in the A100 is not used in this direction by the BSP, and it has some
+analog register changes, so its RX power-on sequence is unknown. To be
+safe, limit RX support to variants where the power-on sequence is known.
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ drivers/phy/allwinner/phy-sun6i-mipi-dphy.c | 25 +++++++++++++++++++--
+ 1 file changed, 23 insertions(+), 2 deletions(-)
+
+--- a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
++++ b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
+@@ -114,6 +114,10 @@ enum sun6i_dphy_direction {
+ SUN6I_DPHY_DIRECTION_RX,
+ };
+
++struct sun6i_dphy_variant {
++ bool supports_rx;
++};
++
+ struct sun6i_dphy {
+ struct clk *bus_clk;
+ struct clk *mod_clk;
+@@ -123,6 +127,7 @@ struct sun6i_dphy {
+ struct phy *phy;
+ struct phy_configure_opts_mipi_dphy config;
+
++ const struct sun6i_dphy_variant *variant;
+ enum sun6i_dphy_direction direction;
+ };
+
+@@ -409,6 +414,10 @@ static int sun6i_dphy_probe(struct platf
+ if (!dphy)
+ return -ENOMEM;
+
++ dphy->variant = device_get_match_data(&pdev->dev);
++ if (!dphy->variant)
++ return -EINVAL;
++
+ regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(regs)) {
+ dev_err(&pdev->dev, "Couldn't map the DPHY encoder registers\n");
+@@ -445,8 +454,13 @@ static int sun6i_dphy_probe(struct platf
+ ret = of_property_read_string(pdev->dev.of_node, "allwinner,direction",
+ &direction);
+
+- if (!ret && !strncmp(direction, "rx", 2))
++ if (!ret && !strncmp(direction, "rx", 2)) {
++ if (!dphy->variant->supports_rx) {
++ dev_err(&pdev->dev, "RX not supported on this variant\n");
++ return -EOPNOTSUPP;
++ }
+ dphy->direction = SUN6I_DPHY_DIRECTION_RX;
++ }
+
+ phy_set_drvdata(dphy->phy, dphy);
+ phy_provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate);
+@@ -454,8 +468,15 @@ static int sun6i_dphy_probe(struct platf
+ return PTR_ERR_OR_ZERO(phy_provider);
+ }
+
++static const struct sun6i_dphy_variant sun6i_a31_mipi_dphy_variant = {
++ .supports_rx = true,
++};
++
+ static const struct of_device_id sun6i_dphy_of_table[] = {
+- { .compatible = "allwinner,sun6i-a31-mipi-dphy" },
++ {
++ .compatible = "allwinner,sun6i-a31-mipi-dphy",
++ .data = &sun6i_a31_mipi_dphy_variant,
++ },
+ { }
+ };
+ MODULE_DEVICE_TABLE(of, sun6i_dphy_of_table);
--- /dev/null
+From 16993169c82c2c57e1df1e7f4598a7c2aa565fe2 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sun, 7 Aug 2022 11:12:02 -0500
+Subject: [PATCH 104/117] phy: allwinner: phy-sun6i-mipi-dphy: Set enable bit
+ last
+
+The A100 variant of the DPHY requires configuring the analog registers
+before setting the global enable bit. Since this order also works on the
+other variants, always use it, to minimize the differences between them.
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ drivers/phy/allwinner/phy-sun6i-mipi-dphy.c | 8 ++++----
+ 1 file changed, 4 insertions(+), 4 deletions(-)
+
+--- a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
++++ b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
+@@ -183,10 +183,6 @@ static int sun6i_dphy_tx_power_on(struct
+ SUN6I_DPHY_TX_TIME4_HS_TX_ANA0(3) |
+ SUN6I_DPHY_TX_TIME4_HS_TX_ANA1(3));
+
+- regmap_write(dphy->regs, SUN6I_DPHY_GCTL_REG,
+- SUN6I_DPHY_GCTL_LANE_NUM(dphy->config.lanes) |
+- SUN6I_DPHY_GCTL_EN);
+-
+ regmap_write(dphy->regs, SUN6I_DPHY_ANA0_REG,
+ SUN6I_DPHY_ANA0_REG_PWS |
+ SUN6I_DPHY_ANA0_REG_DMPC |
+@@ -244,6 +240,10 @@ static int sun6i_dphy_tx_power_on(struct
+ SUN6I_DPHY_ANA2_EN_P2S_CPU_MASK,
+ SUN6I_DPHY_ANA2_EN_P2S_CPU(lanes_mask));
+
++ regmap_write(dphy->regs, SUN6I_DPHY_GCTL_REG,
++ SUN6I_DPHY_GCTL_LANE_NUM(dphy->config.lanes) |
++ SUN6I_DPHY_GCTL_EN);
++
+ return 0;
+ }
+
--- /dev/null
+From b953c09bde508c2edd8acd95abba8542b6cebff6 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sun, 7 Aug 2022 11:44:09 -0500
+Subject: [PATCH 105/117] phy: allwinner: phy-sun6i-mipi-dphy: Add a variant
+ power-on hook
+
+The A100 variant uses the same values for the timing registers, and it
+uses the same final power-on sequence, but it needs a different analog
+register configuration in the middle. Support this by moving the
+variant-specific parts to a hook provided by the variant.
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ drivers/phy/allwinner/phy-sun6i-mipi-dphy.c | 59 ++++++++++++---------
+ 1 file changed, 35 insertions(+), 24 deletions(-)
+
+--- a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
++++ b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
+@@ -114,7 +114,10 @@ enum sun6i_dphy_direction {
+ SUN6I_DPHY_DIRECTION_RX,
+ };
+
++struct sun6i_dphy;
++
+ struct sun6i_dphy_variant {
++ void (*tx_power_on)(struct sun6i_dphy *dphy);
+ bool supports_rx;
+ };
+
+@@ -156,33 +159,10 @@ static int sun6i_dphy_configure(struct p
+ return 0;
+ }
+
+-static int sun6i_dphy_tx_power_on(struct sun6i_dphy *dphy)
++static void sun6i_a31_mipi_dphy_tx_power_on(struct sun6i_dphy *dphy)
+ {
+ u8 lanes_mask = GENMASK(dphy->config.lanes - 1, 0);
+
+- regmap_write(dphy->regs, SUN6I_DPHY_TX_CTL_REG,
+- SUN6I_DPHY_TX_CTL_HS_TX_CLK_CONT);
+-
+- regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME0_REG,
+- SUN6I_DPHY_TX_TIME0_LP_CLK_DIV(14) |
+- SUN6I_DPHY_TX_TIME0_HS_PREPARE(6) |
+- SUN6I_DPHY_TX_TIME0_HS_TRAIL(10));
+-
+- regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME1_REG,
+- SUN6I_DPHY_TX_TIME1_CLK_PREPARE(7) |
+- SUN6I_DPHY_TX_TIME1_CLK_ZERO(50) |
+- SUN6I_DPHY_TX_TIME1_CLK_PRE(3) |
+- SUN6I_DPHY_TX_TIME1_CLK_POST(10));
+-
+- regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME2_REG,
+- SUN6I_DPHY_TX_TIME2_CLK_TRAIL(30));
+-
+- regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME3_REG, 0);
+-
+- regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME4_REG,
+- SUN6I_DPHY_TX_TIME4_HS_TX_ANA0(3) |
+- SUN6I_DPHY_TX_TIME4_HS_TX_ANA1(3));
+-
+ regmap_write(dphy->regs, SUN6I_DPHY_ANA0_REG,
+ SUN6I_DPHY_ANA0_REG_PWS |
+ SUN6I_DPHY_ANA0_REG_DMPC |
+@@ -214,6 +194,36 @@ static int sun6i_dphy_tx_power_on(struct
+ SUN6I_DPHY_ANA3_EN_LDOC |
+ SUN6I_DPHY_ANA3_EN_LDOD);
+ udelay(1);
++}
++
++static int sun6i_dphy_tx_power_on(struct sun6i_dphy *dphy)
++{
++ u8 lanes_mask = GENMASK(dphy->config.lanes - 1, 0);
++
++ regmap_write(dphy->regs, SUN6I_DPHY_TX_CTL_REG,
++ SUN6I_DPHY_TX_CTL_HS_TX_CLK_CONT);
++
++ regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME0_REG,
++ SUN6I_DPHY_TX_TIME0_LP_CLK_DIV(14) |
++ SUN6I_DPHY_TX_TIME0_HS_PREPARE(6) |
++ SUN6I_DPHY_TX_TIME0_HS_TRAIL(10));
++
++ regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME1_REG,
++ SUN6I_DPHY_TX_TIME1_CLK_PREPARE(7) |
++ SUN6I_DPHY_TX_TIME1_CLK_ZERO(50) |
++ SUN6I_DPHY_TX_TIME1_CLK_PRE(3) |
++ SUN6I_DPHY_TX_TIME1_CLK_POST(10));
++
++ regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME2_REG,
++ SUN6I_DPHY_TX_TIME2_CLK_TRAIL(30));
++
++ regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME3_REG, 0);
++
++ regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME4_REG,
++ SUN6I_DPHY_TX_TIME4_HS_TX_ANA0(3) |
++ SUN6I_DPHY_TX_TIME4_HS_TX_ANA1(3));
++
++ dphy->variant->tx_power_on(dphy);
+
+ regmap_update_bits(dphy->regs, SUN6I_DPHY_ANA3_REG,
+ SUN6I_DPHY_ANA3_EN_VTTC |
+@@ -469,6 +479,7 @@ static int sun6i_dphy_probe(struct platf
+ }
+
+ static const struct sun6i_dphy_variant sun6i_a31_mipi_dphy_variant = {
++ .tx_power_on = sun6i_a31_mipi_dphy_tx_power_on,
+ .supports_rx = true,
+ };
+
--- /dev/null
+From 474b608dee5e6285dd1981b00ab568a2f7f15fd0 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Wed, 10 Aug 2022 23:02:06 -0500
+Subject: [PATCH 106/117] phy: allwinner: phy-sun6i-mipi-dphy: Add the A100
+ DPHY variant
+
+A100 features an updated DPHY, which moves PLL control inside the DPHY
+register space (previously the PLL was controlled from the CCU). It also
+requires a modified analog power-on sequence. This "combo PHY" can also
+be used as an LVDS PHY, but that is not yet supported by the driver.
+
+Cover-letter:
+phy: allwinner: phy-sun6i-mipi-dphy: Add the A100 DPHY
+This series adds support for the updated DPHY found in a couple of
+recent Allwinner SoCs. The first three patches fix an omission in the
+existing binding. The remaining patches add the new hardware variant.
+END
+
+Series-to: Kishon Vijay Abraham I <kishon@ti.com>
+Series-to: Vinod Koul <vkoul@kernel.org>
+Series-to: Chen-Yu Tsai <wens@csie.org>
+Series-to: Jernej Skrabec <jernej.skrabec@gmail.com>
+Series-to: Maxime Ripard <mripard@kernel.org>
+Series-cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ drivers/phy/allwinner/phy-sun6i-mipi-dphy.c | 143 +++++++++++++++++++-
+ 1 file changed, 142 insertions(+), 1 deletion(-)
+
+--- a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
++++ b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
+@@ -70,11 +70,19 @@
+
+ #define SUN6I_DPHY_ANA0_REG 0x4c
+ #define SUN6I_DPHY_ANA0_REG_PWS BIT(31)
++#define SUN6I_DPHY_ANA0_REG_PWEND BIT(30)
++#define SUN6I_DPHY_ANA0_REG_PWENC BIT(29)
+ #define SUN6I_DPHY_ANA0_REG_DMPC BIT(28)
+ #define SUN6I_DPHY_ANA0_REG_DMPD(n) (((n) & 0xf) << 24)
++#define SUN6I_DPHY_ANA0_REG_SRXDT(n) (((n) & 0xf) << 20)
++#define SUN6I_DPHY_ANA0_REG_SRXCK(n) (((n) & 0xf) << 16)
++#define SUN6I_DPHY_ANA0_REG_SDIV2 BIT(15)
+ #define SUN6I_DPHY_ANA0_REG_SLV(n) (((n) & 7) << 12)
+ #define SUN6I_DPHY_ANA0_REG_DEN(n) (((n) & 0xf) << 8)
++#define SUN6I_DPHY_ANA0_REG_PLR(n) (((n) & 0xf) << 4)
+ #define SUN6I_DPHY_ANA0_REG_SFB(n) (((n) & 3) << 2)
++#define SUN6I_DPHY_ANA0_REG_RSD BIT(1)
++#define SUN6I_DPHY_ANA0_REG_SELSCK BIT(0)
+
+ #define SUN6I_DPHY_ANA1_REG 0x50
+ #define SUN6I_DPHY_ANA1_REG_VTTMODE BIT(31)
+@@ -97,8 +105,13 @@
+ #define SUN6I_DPHY_ANA3_EN_LDOR BIT(18)
+
+ #define SUN6I_DPHY_ANA4_REG 0x5c
++#define SUN6I_DPHY_ANA4_REG_EN_MIPI BIT(31)
++#define SUN6I_DPHY_ANA4_REG_EN_COMTEST BIT(30)
++#define SUN6I_DPHY_ANA4_REG_COMTEST(n) (((n) & 3) << 28)
++#define SUN6I_DPHY_ANA4_REG_IB(n) (((n) & 3) << 25)
+ #define SUN6I_DPHY_ANA4_REG_DMPLVC BIT(24)
+ #define SUN6I_DPHY_ANA4_REG_DMPLVD(n) (((n) & 0xf) << 20)
++#define SUN6I_DPHY_ANA4_REG_VTT_SET(n) (((n) & 0x7) << 17)
+ #define SUN6I_DPHY_ANA4_REG_CKDV(n) (((n) & 0x1f) << 12)
+ #define SUN6I_DPHY_ANA4_REG_TMSC(n) (((n) & 3) << 10)
+ #define SUN6I_DPHY_ANA4_REG_TMSD(n) (((n) & 3) << 8)
+@@ -109,6 +122,56 @@
+
+ #define SUN6I_DPHY_DBG5_REG 0xf4
+
++#define SUN50I_DPHY_TX_SLEW_REG0 0xf8
++#define SUN50I_DPHY_TX_SLEW_REG1 0xfc
++#define SUN50I_DPHY_TX_SLEW_REG2 0x100
++
++#define SUN50I_DPHY_PLL_REG0 0x104
++#define SUN50I_DPHY_PLL_REG0_CP36_EN BIT(23)
++#define SUN50I_DPHY_PLL_REG0_LDO_EN BIT(22)
++#define SUN50I_DPHY_PLL_REG0_EN_LVS BIT(21)
++#define SUN50I_DPHY_PLL_REG0_PLL_EN BIT(20)
++#define SUN50I_DPHY_PLL_REG0_P(n) (((n) & 0xf) << 16)
++#define SUN50I_DPHY_PLL_REG0_N(n) (((n) & 0xff) << 8)
++#define SUN50I_DPHY_PLL_REG0_NDET BIT(7)
++#define SUN50I_DPHY_PLL_REG0_TDIV BIT(6)
++#define SUN50I_DPHY_PLL_REG0_M0(n) (((n) & 3) << 4)
++#define SUN50I_DPHY_PLL_REG0_M1(n) ((n) & 0xf)
++
++#define SUN50I_DPHY_PLL_REG1 0x108
++#define SUN50I_DPHY_PLL_REG1_UNLOCK_MDSEL(n) (((n) & 3) << 14)
++#define SUN50I_DPHY_PLL_REG1_LOCKMDSEL BIT(13)
++#define SUN50I_DPHY_PLL_REG1_LOCKDET_EN BIT(12)
++#define SUN50I_DPHY_PLL_REG1_VSETA(n) (((n) & 0x7) << 9)
++#define SUN50I_DPHY_PLL_REG1_VSETD(n) (((n) & 0x7) << 6)
++#define SUN50I_DPHY_PLL_REG1_LPF_SW BIT(5)
++#define SUN50I_DPHY_PLL_REG1_ICP_SEL(n) (((n) & 3) << 3)
++#define SUN50I_DPHY_PLL_REG1_ATEST_SEL(n) (((n) & 3) << 1)
++#define SUN50I_DPHY_PLL_REG1_TEST_EN BIT(0)
++
++#define SUN50I_DPHY_PLL_REG2 0x10c
++#define SUN50I_DPHY_PLL_REG2_SDM_EN BIT(31)
++#define SUN50I_DPHY_PLL_REG2_FF_EN BIT(30)
++#define SUN50I_DPHY_PLL_REG2_SS_EN BIT(29)
++#define SUN50I_DPHY_PLL_REG2_SS_FRAC(n) (((n) & 0x1ff) << 20)
++#define SUN50I_DPHY_PLL_REG2_SS_INT(n) (((n) & 0xff) << 12)
++#define SUN50I_DPHY_PLL_REG2_FRAC(n) ((n) & 0xfff)
++
++#define SUN50I_COMBO_PHY_REG0 0x110
++#define SUN50I_COMBO_PHY_REG0_EN_TEST_COMBOLDO BIT(5)
++#define SUN50I_COMBO_PHY_REG0_EN_TEST_0P8 BIT(4)
++#define SUN50I_COMBO_PHY_REG0_EN_MIPI BIT(3)
++#define SUN50I_COMBO_PHY_REG0_EN_LVDS BIT(2)
++#define SUN50I_COMBO_PHY_REG0_EN_COMBOLDO BIT(1)
++#define SUN50I_COMBO_PHY_REG0_EN_CP BIT(0)
++
++#define SUN50I_COMBO_PHY_REG1 0x114
++#define SUN50I_COMBO_PHY_REG2_REG_VREF1P6(n) (((n) & 0x7) << 4)
++#define SUN50I_COMBO_PHY_REG2_REG_VREF0P8(n) ((n) & 0x7)
++
++#define SUN50I_COMBO_PHY_REG2 0x118
++#define SUN50I_COMBO_PHY_REG2_HS_STOP_DLY(n) ((n) & 0xff)
++
+ enum sun6i_dphy_direction {
+ SUN6I_DPHY_DIRECTION_TX,
+ SUN6I_DPHY_DIRECTION_RX,
+@@ -196,6 +259,76 @@ static void sun6i_a31_mipi_dphy_tx_power
+ udelay(1);
+ }
+
++static void sun50i_a100_mipi_dphy_tx_power_on(struct sun6i_dphy *dphy)
++{
++ unsigned long mipi_symbol_rate = dphy->config.hs_clk_rate;
++ unsigned int div, n;
++
++ regmap_write(dphy->regs, SUN6I_DPHY_ANA4_REG,
++ SUN6I_DPHY_ANA4_REG_IB(2) |
++ SUN6I_DPHY_ANA4_REG_DMPLVD(4) |
++ SUN6I_DPHY_ANA4_REG_VTT_SET(3) |
++ SUN6I_DPHY_ANA4_REG_CKDV(3) |
++ SUN6I_DPHY_ANA4_REG_TMSD(1) |
++ SUN6I_DPHY_ANA4_REG_TMSC(1) |
++ SUN6I_DPHY_ANA4_REG_TXPUSD(2) |
++ SUN6I_DPHY_ANA4_REG_TXPUSC(3) |
++ SUN6I_DPHY_ANA4_REG_TXDNSD(2) |
++ SUN6I_DPHY_ANA4_REG_TXDNSC(3));
++
++ regmap_update_bits(dphy->regs, SUN6I_DPHY_ANA2_REG,
++ SUN6I_DPHY_ANA2_EN_CK_CPU,
++ SUN6I_DPHY_ANA2_EN_CK_CPU);
++
++ regmap_update_bits(dphy->regs, SUN6I_DPHY_ANA2_REG,
++ SUN6I_DPHY_ANA2_REG_ENIB,
++ SUN6I_DPHY_ANA2_REG_ENIB);
++
++ regmap_write(dphy->regs, SUN6I_DPHY_ANA3_REG,
++ SUN6I_DPHY_ANA3_EN_LDOR |
++ SUN6I_DPHY_ANA3_EN_LDOC |
++ SUN6I_DPHY_ANA3_EN_LDOD);
++
++ regmap_write(dphy->regs, SUN6I_DPHY_ANA0_REG,
++ SUN6I_DPHY_ANA0_REG_PLR(4) |
++ SUN6I_DPHY_ANA0_REG_SFB(1));
++
++ regmap_write(dphy->regs, SUN50I_COMBO_PHY_REG0,
++ SUN50I_COMBO_PHY_REG0_EN_CP);
++
++ /* Choose a divider to limit the VCO frequency to around 2 GHz. */
++ div = 16 >> order_base_2(DIV_ROUND_UP(mipi_symbol_rate, 264000000));
++ n = mipi_symbol_rate * div / 24000000;
++
++ regmap_write(dphy->regs, SUN50I_DPHY_PLL_REG0,
++ SUN50I_DPHY_PLL_REG0_CP36_EN |
++ SUN50I_DPHY_PLL_REG0_LDO_EN |
++ SUN50I_DPHY_PLL_REG0_EN_LVS |
++ SUN50I_DPHY_PLL_REG0_PLL_EN |
++ SUN50I_DPHY_PLL_REG0_NDET |
++ SUN50I_DPHY_PLL_REG0_P((div - 1) % 8) |
++ SUN50I_DPHY_PLL_REG0_N(n) |
++ SUN50I_DPHY_PLL_REG0_M0((div - 1) / 8) |
++ SUN50I_DPHY_PLL_REG0_M1(2));
++
++ /* Disable sigma-delta modulation. */
++ regmap_write(dphy->regs, SUN50I_DPHY_PLL_REG2, 0);
++
++ regmap_update_bits(dphy->regs, SUN6I_DPHY_ANA4_REG,
++ SUN6I_DPHY_ANA4_REG_EN_MIPI,
++ SUN6I_DPHY_ANA4_REG_EN_MIPI);
++
++ regmap_update_bits(dphy->regs, SUN50I_COMBO_PHY_REG0,
++ SUN50I_COMBO_PHY_REG0_EN_MIPI |
++ SUN50I_COMBO_PHY_REG0_EN_COMBOLDO,
++ SUN50I_COMBO_PHY_REG0_EN_MIPI |
++ SUN50I_COMBO_PHY_REG0_EN_COMBOLDO);
++
++ regmap_write(dphy->regs, SUN50I_COMBO_PHY_REG2,
++ SUN50I_COMBO_PHY_REG2_HS_STOP_DLY(20));
++ udelay(1);
++}
++
+ static int sun6i_dphy_tx_power_on(struct sun6i_dphy *dphy)
+ {
+ u8 lanes_mask = GENMASK(dphy->config.lanes - 1, 0);
+@@ -408,7 +541,7 @@ static const struct regmap_config sun6i_
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+- .max_register = SUN6I_DPHY_DBG5_REG,
++ .max_register = SUN50I_COMBO_PHY_REG2,
+ .name = "mipi-dphy",
+ };
+
+@@ -483,11 +616,19 @@ static const struct sun6i_dphy_variant s
+ .supports_rx = true,
+ };
+
++static const struct sun6i_dphy_variant sun50i_a100_mipi_dphy_variant = {
++ .tx_power_on = sun50i_a100_mipi_dphy_tx_power_on,
++};
++
+ static const struct of_device_id sun6i_dphy_of_table[] = {
+ {
+ .compatible = "allwinner,sun6i-a31-mipi-dphy",
+ .data = &sun6i_a31_mipi_dphy_variant,
+ },
++ {
++ .compatible = "allwinner,sun50i-a100-mipi-dphy",
++ .data = &sun50i_a100_mipi_dphy_variant,
++ },
+ { }
+ };
+ MODULE_DEVICE_TABLE(of, sun6i_dphy_of_table);
--- /dev/null
+From 5bf84a1a0a282a18bf9dd2d752537525aefc2e05 Mon Sep 17 00:00:00 2001
+From: Max Fierke <max@maxfierke.com>
+Date: Wed, 1 Jun 2022 00:17:48 -0500
+Subject: [PATCH 107/117] drm: panel: Add driver for Clockwork cwd686 panel
+
+The Clockwork DevTerm (all models) uses a 6.86" IPS display
+of unknown provenance, which uses the Chipone ICNL9707 IC driver.
+
+The display panel I have has two model numbers: TXW686001 and WTL068601G,
+but cannot find any manufacturer associated with either, so opting for the
+Clockwork model number.
+
+This driver is based on the GPL-licensed driver released by Clockwork,
+authored by Pinfan Zhu, with some additional cleanup, rotation support,
+and display sleep re-enabling done by me.
+
+Original driver here for reference: https://github.com/clockworkpi/DevTerm/blob/main/Code/patch/armbian_build_a06/patch/kernel-004-panel.patch
+Display IC datasheet provided here: https://github.com/clockworkpi/DevTerm/blob/main/Schematics/ICNL9707_Datasheet.pdf
+
+Signed-off-by: Max Fierke <max@maxfierke.com>
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ drivers/gpu/drm/panel/Kconfig | 12 +
+ drivers/gpu/drm/panel/Makefile | 1 +
+ .../gpu/drm/panel/panel-clockwork-cwd686.c | 456 ++++++++++++++++++
+ 3 files changed, 469 insertions(+)
+ create mode 100644 drivers/gpu/drm/panel/panel-clockwork-cwd686.c
+
+--- a/drivers/gpu/drm/panel/Kconfig
++++ b/drivers/gpu/drm/panel/Kconfig
+@@ -68,6 +68,18 @@ config DRM_PANEL_BOE_TV101WUM_NL6
+ Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
+ 45NA WUXGA PANEL DSI Video Mode panel
+
++config DRM_PANEL_CLOCKWORK_CWD686
++ tristate "Clockwork CWD686 panel"
++ depends on OF
++ depends on DRM_MIPI_DSI
++ depends on BACKLIGHT_CLASS_DEVICE
++ help
++ Say Y here if you want to enable support for the Clockwork CWD686
++ ICNL9707-based panel, e.g. as used within the Clockwork DevTerm.
++ The panel has a 480x1280 resolution and uses 24 bit RGB per pixel.
++
++ To compile this driver as a module, choose M here.
++
+ config DRM_PANEL_DSI_CM
+ tristate "Generic DSI command mode panels"
+ depends on OF
+--- a/drivers/gpu/drm/panel/Makefile
++++ b/drivers/gpu/drm/panel/Makefile
+@@ -5,6 +5,7 @@ obj-$(CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_N
+ obj-$(CONFIG_DRM_PANEL_BOE_BF060Y8M_AJ0) += panel-boe-bf060y8m-aj0.o
+ obj-$(CONFIG_DRM_PANEL_BOE_HIMAX8279D) += panel-boe-himax8279d.o
+ obj-$(CONFIG_DRM_PANEL_BOE_TV101WUM_NL6) += panel-boe-tv101wum-nl6.o
++obj-$(CONFIG_DRM_PANEL_CLOCKWORK_CWD686) += panel-clockwork-cwd686.o
+ obj-$(CONFIG_DRM_PANEL_DSI_CM) += panel-dsi-cm.o
+ obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o
+ obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o
+--- /dev/null
++++ b/drivers/gpu/drm/panel/panel-clockwork-cwd686.c
+@@ -0,0 +1,456 @@
++// SPDX-License-Identifier: GPL-2.0+
++/*
++ * Copyright (c) 2021 Clockwork Tech LLC
++ * Copyright (c) 2021-2022 Max Fierke <max@maxfierke.com>
++ *
++ * Based on Pinfan Zhu's work on panel-cwd686.c for ClockworkPi's 5.10 BSP
++ */
++
++#include <drm/drm_modes.h>
++#include <drm/drm_mipi_dsi.h>
++#include <drm/drm_panel.h>
++#include <linux/backlight.h>
++#include <linux/gpio/consumer.h>
++#include <linux/regulator/consumer.h>
++#include <linux/delay.h>
++#include <linux/of_device.h>
++#include <linux/module.h>
++#include <video/mipi_display.h>
++
++struct cwd686 {
++ struct device *dev;
++ struct drm_panel panel;
++ struct regulator *supply;
++ struct gpio_desc *enable_gpio;
++ struct gpio_desc *reset_gpio;
++ struct backlight_device *backlight;
++ enum drm_panel_orientation orientation;
++ bool prepared;
++ bool enabled;
++};
++
++static const struct drm_display_mode default_mode = {
++ .clock = 54465,
++ .hdisplay = 480,
++ .hsync_start = 480 + 150,
++ .hsync_end = 480 + 150 + 24,
++ .htotal = 480 + 150 + 24 + 40,
++ .vdisplay = 1280,
++ .vsync_start = 1280 + 12,
++ .vsync_end = 1280 + 12 + 6,
++ .vtotal = 1280 + 12 + 6 + 10,
++};
++
++static inline struct cwd686 *panel_to_cwd686(struct drm_panel *panel)
++{
++ return container_of(panel, struct cwd686, panel);
++}
++
++#define ICNL9707_DCS(seq...) \
++({ \
++ static const u8 d[] = { seq }; \
++ mipi_dsi_dcs_write_buffer(dsi, d, ARRAY_SIZE(d)); \
++})
++
++#define ICNL9707_CMD_CGOUTL 0xB3
++#define ICNL9707_CMD_CGOUTR 0xB4
++#define ICNL9707_P_CGOUT_VGL 0x00
++#define ICNL9707_P_CGOUT_VGH 0x01
++#define ICNL9707_P_CGOUT_HZ 0x02
++#define ICNL9707_P_CGOUT_GND 0x03
++#define ICNL9707_P_CGOUT_GSP1 0x04
++#define ICNL9707_P_CGOUT_GSP2 0x05
++#define ICNL9707_P_CGOUT_GSP3 0x06
++#define ICNL9707_P_CGOUT_GSP4 0x07
++#define ICNL9707_P_CGOUT_GSP5 0x08
++#define ICNL9707_P_CGOUT_GSP6 0x09
++#define ICNL9707_P_CGOUT_GSP7 0x0A
++#define ICNL9707_P_CGOUT_GSP8 0x0B
++#define ICNL9707_P_CGOUT_GCK1 0x0C
++#define ICNL9707_P_CGOUT_GCK2 0x0D
++#define ICNL9707_P_CGOUT_GCK3 0x0E
++#define ICNL9707_P_CGOUT_GCK4 0x0F
++#define ICNL9707_P_CGOUT_GCK5 0x10
++#define ICNL9707_P_CGOUT_GCK6 0x11
++#define ICNL9707_P_CGOUT_GCK7 0x12
++#define ICNL9707_P_CGOUT_GCK8 0x13
++#define ICNL9707_P_CGOUT_GCK9 0x14
++#define ICNL9707_P_CGOUT_GCK10 0x15
++#define ICNL9707_P_CGOUT_GCK11 0x16
++#define ICNL9707_P_CGOUT_GCK12 0x17
++#define ICNL9707_P_CGOUT_GCK13 0x18
++#define ICNL9707_P_CGOUT_GCK14 0x19
++#define ICNL9707_P_CGOUT_GCK15 0x1A
++#define ICNL9707_P_CGOUT_GCK16 0x1B
++#define ICNL9707_P_CGOUT_DIR 0x1C
++#define ICNL9707_P_CGOUT_DIRB 0x1D
++#define ICNL9707_P_CGOUT_ECLK_AC 0x1E
++#define ICNL9707_P_CGOUT_ECLK_ACB 0x1F
++#define ICNL9707_P_CGOUT_ECLK_AC2 0x20
++#define ICNL9707_P_CGOUT_ECLK_AC2B 0x21
++#define ICNL9707_P_CGOUT_GCH 0x22
++#define ICNL9707_P_CGOUT_GCL 0x23
++#define ICNL9707_P_CGOUT_XDON 0x24
++#define ICNL9707_P_CGOUT_XDONB 0x25
++
++#define ICNL9707_MADCTL_ML 0x10
++#define ICNL9707_MADCTL_RGB 0x00
++#define ICNL9707_MADCTL_BGR 0x08
++#define ICNL9707_MADCTL_MH 0x04
++
++#define ICNL9707_CMD_PWRCON_VCOM 0xB6
++#define ICNL9707_P_PWRCON_VCOM_0495V 0x0D
++
++#define ICNL9707_CMD_PWRCON_SEQ 0xB7
++#define ICNL9707_CMD_PWRCON_CLK 0xB8
++#define ICNL9707_CMD_PWRCON_BTA 0xB9
++#define ICNL9707_CMD_PWRCON_MODE 0xBA
++#define ICNL9707_CMD_PWRCON_REG 0xBD
++
++#define ICNL9707_CMD_TCON 0xC1
++#define ICNL9707_CMD_TCON2 0xC2
++#define ICNL9707_CMD_TCON3 0xC3
++#define ICNL9707_CMD_SRC_TIM 0xC6
++#define ICNL9707_CMD_SRCCON 0xC7
++#define ICNL9707_CMD_SET_GAMMA 0xC8
++
++#define ICNL9707_CMD_ETC 0xD0
++
++#define ICNL9707_CMD_PASSWORD1 0xF0
++#define ICNL9707_P_PASSWORD1_DEFAULT 0xA5
++#define ICNL9707_P_PASSWORD1_ENABLE_LVL2 0x5A
++
++#define ICNL9707_CMD_PASSWORD2 0xF1
++#define ICNL9707_P_PASSWORD2_DEFAULT 0x5A
++#define ICNL9707_P_PASSWORD2_ENABLE_LVL2 0xA5
++
++static int cwd686_init_sequence(struct cwd686 *ctx)
++{
++ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
++ int err;
++
++ /* Enable access to Level 2 registers */
++ ICNL9707_DCS(ICNL9707_CMD_PASSWORD1,
++ ICNL9707_P_PASSWORD1_ENABLE_LVL2,
++ ICNL9707_P_PASSWORD1_ENABLE_LVL2);
++ ICNL9707_DCS(ICNL9707_CMD_PASSWORD2,
++ ICNL9707_P_PASSWORD2_ENABLE_LVL2,
++ ICNL9707_P_PASSWORD2_ENABLE_LVL2);
++
++ /* Set PWRCON_VCOM (-0.495V, -0.495V) */
++ ICNL9707_DCS(ICNL9707_CMD_PWRCON_VCOM,
++ ICNL9707_P_PWRCON_VCOM_0495V,
++ ICNL9707_P_PWRCON_VCOM_0495V);
++
++ /* Map ASG output signals */
++ ICNL9707_DCS(ICNL9707_CMD_CGOUTR,
++ ICNL9707_P_CGOUT_GSP7, ICNL9707_P_CGOUT_GSP5,
++ ICNL9707_P_CGOUT_GCK7, ICNL9707_P_CGOUT_GCK5,
++ ICNL9707_P_CGOUT_GCK3, ICNL9707_P_CGOUT_GCK1,
++ ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_VGL,
++ ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_GND,
++ ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_GND,
++ ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND,
++ ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND,
++ ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND,
++ ICNL9707_P_CGOUT_GSP1, ICNL9707_P_CGOUT_GSP3);
++ ICNL9707_DCS(ICNL9707_CMD_CGOUTL,
++ ICNL9707_P_CGOUT_GSP8, ICNL9707_P_CGOUT_GSP6,
++ ICNL9707_P_CGOUT_GCK8, ICNL9707_P_CGOUT_GCK6,
++ ICNL9707_P_CGOUT_GCK4, ICNL9707_P_CGOUT_GCK2,
++ ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_VGL,
++ ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_GND,
++ ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_GND,
++ ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND,
++ ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND,
++ ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND,
++ ICNL9707_P_CGOUT_GSP2, ICNL9707_P_CGOUT_GSP4);
++
++ /* Undocumented commands provided by the vendor */
++ ICNL9707_DCS(0xB0, 0x54, 0x32, 0x23, 0x45, 0x44, 0x44, 0x44, 0x44, 0x90, 0x01, 0x90, 0x01);
++ ICNL9707_DCS(0xB1, 0x32, 0x84, 0x02, 0x83, 0x30, 0x01, 0x6B, 0x01);
++ ICNL9707_DCS(0xB2, 0x73);
++
++ ICNL9707_DCS(ICNL9707_CMD_PWRCON_REG,
++ 0x4E, 0x0E, 0x50, 0x50, 0x26,
++ 0x1D, 0x00, 0x14, 0x42, 0x03);
++ ICNL9707_DCS(ICNL9707_CMD_PWRCON_SEQ,
++ 0x01, 0x01, 0x09, 0x11, 0x0D, 0x55,
++ 0x19, 0x19, 0x21, 0x1D, 0x00, 0x00,
++ 0x00, 0x00, 0x02, 0xFF, 0x3C);
++ ICNL9707_DCS(ICNL9707_CMD_PWRCON_CLK, 0x23, 0x01, 0x30, 0x34, 0x63);
++
++ /* Disable abnormal power-off flag */
++ ICNL9707_DCS(ICNL9707_CMD_PWRCON_BTA, 0xA0, 0x22, 0x00, 0x44);
++
++ ICNL9707_DCS(ICNL9707_CMD_PWRCON_MODE, 0x12, 0x63);
++
++ /* Set VBP, VFP, VSW, HBP, HFP, HSW */
++ ICNL9707_DCS(ICNL9707_CMD_TCON, 0x0C, 0x16, 0x04, 0x0C, 0x10, 0x04);
++
++ /* Set resolution */
++ ICNL9707_DCS(ICNL9707_CMD_TCON2, 0x11, 0x41);
++
++ /* Set frame blanking */
++ ICNL9707_DCS(ICNL9707_CMD_TCON3, 0x22, 0x31, 0x04);
++
++ ICNL9707_DCS(ICNL9707_CMD_SRCCON, 0x05, 0x23, 0x6B, 0x49, 0x00);
++
++ /* Another undocumented command */
++ ICNL9707_DCS(0xC5, 0x00);
++
++ ICNL9707_DCS(ICNL9707_CMD_ETC, 0x37, 0xFF, 0xFF);
++
++ /* Another set of undocumented commands */
++ ICNL9707_DCS(0xD2, 0x63, 0x0B, 0x08, 0x88);
++ ICNL9707_DCS(0xD3, 0x01, 0x00, 0x00, 0x01, 0x01, 0x37, 0x25, 0x38, 0x31, 0x06, 0x07);
++
++ /* Set Gamma to 2.2 */
++ ICNL9707_DCS(ICNL9707_CMD_SET_GAMMA,
++ 0x7C, 0x6A, 0x5D, 0x53, 0x53, 0x45, 0x4B,
++ 0x35, 0x4D, 0x4A, 0x49, 0x66, 0x53, 0x57,
++ 0x4A, 0x48, 0x3B, 0x2A, 0x06, 0x7C, 0x6A,
++ 0x5D, 0x53, 0x53, 0x45, 0x4B, 0x35, 0x4D,
++ 0x4A, 0x49, 0x66, 0x53, 0x57, 0x4A, 0x48,
++ 0x3B, 0x2A, 0x06);
++
++ ICNL9707_DCS(ICNL9707_CMD_SRC_TIM, 0x00, 0x00, 0xFF, 0x00, 0x00, 0xFF, 0x00, 0x00);
++
++ /* Another undocumented command */
++ ICNL9707_DCS(0xF4, 0x08, 0x77);
++
++ ICNL9707_DCS(MIPI_DCS_SET_ADDRESS_MODE,
++ ICNL9707_MADCTL_RGB | ICNL9707_MADCTL_ML | ICNL9707_MADCTL_MH);
++
++ /* Enable tearing mode at VBLANK */
++ err = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
++ if (err) {
++ dev_err(ctx->dev, "failed to enable vblank TE (%d)\n", err);
++ return err;
++ }
++
++ /* Disable access to Level 2 registers */
++ ICNL9707_DCS(ICNL9707_CMD_PASSWORD2,
++ ICNL9707_P_PASSWORD2_DEFAULT,
++ ICNL9707_P_PASSWORD2_DEFAULT);
++ ICNL9707_DCS(ICNL9707_CMD_PASSWORD1,
++ ICNL9707_P_PASSWORD1_DEFAULT,
++ ICNL9707_P_PASSWORD1_DEFAULT);
++
++ return 0;
++}
++
++static int cwd686_disable(struct drm_panel *panel)
++{
++ struct cwd686 *ctx = panel_to_cwd686(panel);
++
++ if (!ctx->enabled)
++ return 0;
++
++ backlight_disable(ctx->backlight);
++
++ ctx->enabled = false;
++
++ return 0;
++}
++
++static int cwd686_unprepare(struct drm_panel *panel)
++{
++ struct cwd686 *ctx = panel_to_cwd686(panel);
++ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
++ int err;
++
++ if (!ctx->prepared)
++ return 0;
++
++ err = mipi_dsi_dcs_set_display_off(dsi);
++ if (err) {
++ dev_err(ctx->dev, "failed to turn display off (%d)\n", err);
++ return err;
++ }
++
++ err = mipi_dsi_dcs_enter_sleep_mode(dsi);
++ if (err) {
++ dev_err(ctx->dev, "failed to enter sleep mode (%d)\n", err);
++ return err;
++ }
++
++ msleep(120);
++
++ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
++
++ ctx->prepared = false;
++
++ return 0;
++}
++
++static int cwd686_prepare(struct drm_panel *panel)
++{
++ struct cwd686 *ctx = panel_to_cwd686(panel);
++ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
++ int err;
++
++ if (ctx->prepared)
++ return 0;
++
++ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
++ /* T2 */
++ msleep(10);
++
++ gpiod_set_value_cansleep(ctx->reset_gpio, 0);
++ /* T3 */
++ msleep(20);
++
++ /* Exit sleep mode and power on */
++
++ err = cwd686_init_sequence(ctx);
++ if (err) {
++ dev_err(ctx->dev, "failed to initialize display (%d)\n", err);
++ return err;
++ }
++
++ err = mipi_dsi_dcs_exit_sleep_mode(dsi);
++ if (err) {
++ dev_err(ctx->dev, "failed to exit sleep mode (%d)\n", err);
++ return err;
++ }
++ /* T6 */
++ msleep(120);
++
++ err = mipi_dsi_dcs_set_display_on(dsi);
++ if (err) {
++ dev_err(ctx->dev, "failed to turn display on (%d)\n", err);
++ return err;
++ }
++ msleep(20);
++
++ ctx->prepared = true;
++
++ return 0;
++}
++
++static int cwd686_enable(struct drm_panel *panel)
++{
++ struct cwd686 *ctx = panel_to_cwd686(panel);
++
++ if (ctx->enabled)
++ return 0;
++
++ backlight_enable(ctx->backlight);
++
++ ctx->enabled = true;
++
++ return 0;
++}
++
++static int cwd686_get_modes(struct drm_panel *panel, struct drm_connector *connector)
++{
++ struct cwd686 *ctx = panel_to_cwd686(panel);
++ struct drm_display_mode *mode;
++
++ mode = drm_mode_duplicate(connector->dev, &default_mode);
++ if (!mode) {
++ dev_err(panel->dev, "bad mode or failed to add mode\n");
++ return -EINVAL;
++ }
++ drm_mode_set_name(mode);
++ mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
++
++ connector->display_info.width_mm = mode->width_mm;
++ connector->display_info.height_mm = mode->height_mm;
++
++ /* set up connector's "panel orientation" property */
++ drm_connector_set_panel_orientation(connector, ctx->orientation);
++
++ drm_mode_probed_add(connector, mode);
++
++ return 1; /* Number of modes */
++}
++
++static const struct drm_panel_funcs cwd686_drm_funcs = {
++ .disable = cwd686_disable,
++ .unprepare = cwd686_unprepare,
++ .prepare = cwd686_prepare,
++ .enable = cwd686_enable,
++ .get_modes = cwd686_get_modes,
++};
++
++static int cwd686_probe(struct mipi_dsi_device *dsi)
++{
++ struct device *dev = &dsi->dev;
++ struct cwd686 *ctx;
++ int err;
++
++ ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
++ if (!ctx)
++ return -ENOMEM;
++
++ mipi_dsi_set_drvdata(dsi, ctx);
++ ctx->dev = dev;
++
++ dsi->lanes = 4;
++ dsi->format = MIPI_DSI_FMT_RGB888;
++ dsi->mode_flags = MIPI_DSI_MODE_VIDEO |
++ MIPI_DSI_MODE_VIDEO_BURST |
++ MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
++
++ ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
++ if (IS_ERR(ctx->reset_gpio)) {
++ err = PTR_ERR(ctx->reset_gpio);
++ if (err != -EPROBE_DEFER)
++ dev_err(dev, "failed to request GPIO (%d)\n", err);
++ return err;
++ }
++
++ ctx->backlight = devm_of_find_backlight(dev);
++ if (IS_ERR(ctx->backlight))
++ return PTR_ERR(ctx->backlight);
++
++ err = of_drm_get_panel_orientation(dev->of_node, &ctx->orientation);
++ if (err) {
++ dev_err(dev, "%pOF: failed to get orientation %d\n", dev->of_node, err);
++ return err;
++ }
++
++ drm_panel_init(&ctx->panel, dev, &cwd686_drm_funcs, DRM_MODE_CONNECTOR_DSI);
++
++ drm_panel_add(&ctx->panel);
++
++ err = mipi_dsi_attach(dsi);
++ if (err < 0) {
++ dev_err(dev, "mipi_dsi_attach() failed: %d\n", err);
++ drm_panel_remove(&ctx->panel);
++ return err;
++ }
++
++ return 0;
++}
++
++static void cwd686_remove(struct mipi_dsi_device *dsi)
++{
++ struct cwd686 *ctx = mipi_dsi_get_drvdata(dsi);
++
++ mipi_dsi_detach(dsi);
++ drm_panel_remove(&ctx->panel);
++}
++
++static const struct of_device_id cwd686_of_match[] = {
++ { .compatible = "clockwork,cwd686" },
++ { /* sentinel */ }
++};
++MODULE_DEVICE_TABLE(of, cwd686_of_match);
++
++static struct mipi_dsi_driver cwd686_driver = {
++ .probe = cwd686_probe,
++ .remove = cwd686_remove,
++ .driver = {
++ .name = "panel-clockwork-cwd686",
++ .of_match_table = cwd686_of_match,
++ },
++};
++module_mipi_dsi_driver(cwd686_driver);
++
++MODULE_AUTHOR("Pinfan Zhu <zhu@clockworkpi.com>");
++MODULE_AUTHOR("Max Fierke <max@maxfierke.com>");
++MODULE_DESCRIPTION("ClockworkPi CWD686 panel driver");
++MODULE_LICENSE("GPL");
--- /dev/null
+From 979271f803c1578087a965a2a4b845c87e7d922f Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sun, 7 Aug 2022 19:14:21 -0500
+Subject: [PATCH 108/117] drm: panel: cwd686: Add regulators
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ .../gpu/drm/panel/panel-clockwork-cwd686.c | 26 ++++++++++++++++++-
+ 1 file changed, 25 insertions(+), 1 deletion(-)
+
+--- a/drivers/gpu/drm/panel/panel-clockwork-cwd686.c
++++ b/drivers/gpu/drm/panel/panel-clockwork-cwd686.c
+@@ -20,7 +20,8 @@
+ struct cwd686 {
+ struct device *dev;
+ struct drm_panel panel;
+- struct regulator *supply;
++ struct regulator *iovcc;
++ struct regulator *vci;
+ struct gpio_desc *enable_gpio;
+ struct gpio_desc *reset_gpio;
+ struct backlight_device *backlight;
+@@ -279,6 +280,9 @@ static int cwd686_unprepare(struct drm_p
+
+ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+
++ regulator_disable(ctx->vci);
++ regulator_disable(ctx->iovcc);
++
+ ctx->prepared = false;
+
+ return 0;
+@@ -293,6 +297,18 @@ static int cwd686_prepare(struct drm_pan
+ if (ctx->prepared)
+ return 0;
+
++ err = regulator_enable(ctx->iovcc);
++ if (err) {
++ dev_err(ctx->dev, "failed to enable iovcc (%d)\n", err);
++ return err;
++ }
++
++ err = regulator_enable(ctx->vci);
++ if (err) {
++ dev_err(ctx->dev, "failed to enable vci (%d)\n", err);
++ return err;
++ }
++
+ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+ /* T2 */
+ msleep(10);
+@@ -402,6 +418,14 @@ static int cwd686_probe(struct mipi_dsi_
+ return err;
+ }
+
++ ctx->iovcc = devm_regulator_get(dev, "iovcc");
++ if (IS_ERR(ctx->iovcc))
++ return PTR_ERR(ctx->iovcc);
++
++ ctx->vci = devm_regulator_get(dev, "vci");
++ if (IS_ERR(ctx->vci))
++ return PTR_ERR(ctx->vci);
++
+ ctx->backlight = devm_of_find_backlight(dev);
+ if (IS_ERR(ctx->backlight))
+ return PTR_ERR(ctx->backlight);
--- /dev/null
+From 6112585994a6bdbd882709e7187c8c9289211b3b Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sun, 7 Aug 2022 19:16:03 -0500
+Subject: [PATCH 109/117] drm: panel: cwd686: Make reset gpio mandatory
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ drivers/gpu/drm/panel/panel-clockwork-cwd686.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/gpu/drm/panel/panel-clockwork-cwd686.c
++++ b/drivers/gpu/drm/panel/panel-clockwork-cwd686.c
+@@ -410,7 +410,7 @@ static int cwd686_probe(struct mipi_dsi_
+ MIPI_DSI_MODE_VIDEO_BURST |
+ MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
+
+- ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
++ ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(ctx->reset_gpio)) {
+ err = PTR_ERR(ctx->reset_gpio);
+ if (err != -EPROBE_DEFER)
--- /dev/null
+From 8d70f9f4a66522c2720de986623d1130337ff670 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sun, 7 Aug 2022 19:16:18 -0500
+Subject: [PATCH 110/117] drm: panel: cwd686: Increase post-reset delay
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ drivers/gpu/drm/panel/panel-clockwork-cwd686.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/gpu/drm/panel/panel-clockwork-cwd686.c
++++ b/drivers/gpu/drm/panel/panel-clockwork-cwd686.c
+@@ -315,7 +315,7 @@ static int cwd686_prepare(struct drm_pan
+
+ gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+ /* T3 */
+- msleep(20);
++ msleep(120);
+
+ /* Exit sleep mode and power on */
+
--- /dev/null
+From 8fc2a02d1d2e98a01a2dad3bf3da8e33366725eb Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sun, 7 Aug 2022 19:17:35 -0500
+Subject: [PATCH 111/117] drm: panel: cwd686: Use vendor panel init sequence
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ .../gpu/drm/panel/panel-clockwork-cwd686.c | 142 ++++--------------
+ 1 file changed, 32 insertions(+), 110 deletions(-)
+
+--- a/drivers/gpu/drm/panel/panel-clockwork-cwd686.c
++++ b/drivers/gpu/drm/panel/panel-clockwork-cwd686.c
+@@ -47,10 +47,12 @@ static inline struct cwd686 *panel_to_cw
+ return container_of(panel, struct cwd686, panel);
+ }
+
+-#define ICNL9707_DCS(seq...) \
++#define dcs_write_seq(seq...) \
+ ({ \
+ static const u8 d[] = { seq }; \
+- mipi_dsi_dcs_write_buffer(dsi, d, ARRAY_SIZE(d)); \
++ ssize_t r = mipi_dsi_dcs_write_buffer(dsi, d, ARRAY_SIZE(d)); \
++ if (r < 0) \
++ return r; \
+ })
+
+ #define ICNL9707_CMD_CGOUTL 0xB3
+@@ -128,115 +130,35 @@ static inline struct cwd686 *panel_to_cw
+ static int cwd686_init_sequence(struct cwd686 *ctx)
+ {
+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+- int err;
+
+- /* Enable access to Level 2 registers */
+- ICNL9707_DCS(ICNL9707_CMD_PASSWORD1,
+- ICNL9707_P_PASSWORD1_ENABLE_LVL2,
+- ICNL9707_P_PASSWORD1_ENABLE_LVL2);
+- ICNL9707_DCS(ICNL9707_CMD_PASSWORD2,
+- ICNL9707_P_PASSWORD2_ENABLE_LVL2,
+- ICNL9707_P_PASSWORD2_ENABLE_LVL2);
+-
+- /* Set PWRCON_VCOM (-0.495V, -0.495V) */
+- ICNL9707_DCS(ICNL9707_CMD_PWRCON_VCOM,
+- ICNL9707_P_PWRCON_VCOM_0495V,
+- ICNL9707_P_PWRCON_VCOM_0495V);
+-
+- /* Map ASG output signals */
+- ICNL9707_DCS(ICNL9707_CMD_CGOUTR,
+- ICNL9707_P_CGOUT_GSP7, ICNL9707_P_CGOUT_GSP5,
+- ICNL9707_P_CGOUT_GCK7, ICNL9707_P_CGOUT_GCK5,
+- ICNL9707_P_CGOUT_GCK3, ICNL9707_P_CGOUT_GCK1,
+- ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_VGL,
+- ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_GND,
+- ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_GND,
+- ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND,
+- ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND,
+- ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND,
+- ICNL9707_P_CGOUT_GSP1, ICNL9707_P_CGOUT_GSP3);
+- ICNL9707_DCS(ICNL9707_CMD_CGOUTL,
+- ICNL9707_P_CGOUT_GSP8, ICNL9707_P_CGOUT_GSP6,
+- ICNL9707_P_CGOUT_GCK8, ICNL9707_P_CGOUT_GCK6,
+- ICNL9707_P_CGOUT_GCK4, ICNL9707_P_CGOUT_GCK2,
+- ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_VGL,
+- ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_GND,
+- ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_GND,
+- ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND,
+- ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND,
+- ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND,
+- ICNL9707_P_CGOUT_GSP2, ICNL9707_P_CGOUT_GSP4);
+-
+- /* Undocumented commands provided by the vendor */
+- ICNL9707_DCS(0xB0, 0x54, 0x32, 0x23, 0x45, 0x44, 0x44, 0x44, 0x44, 0x90, 0x01, 0x90, 0x01);
+- ICNL9707_DCS(0xB1, 0x32, 0x84, 0x02, 0x83, 0x30, 0x01, 0x6B, 0x01);
+- ICNL9707_DCS(0xB2, 0x73);
+-
+- ICNL9707_DCS(ICNL9707_CMD_PWRCON_REG,
+- 0x4E, 0x0E, 0x50, 0x50, 0x26,
+- 0x1D, 0x00, 0x14, 0x42, 0x03);
+- ICNL9707_DCS(ICNL9707_CMD_PWRCON_SEQ,
+- 0x01, 0x01, 0x09, 0x11, 0x0D, 0x55,
+- 0x19, 0x19, 0x21, 0x1D, 0x00, 0x00,
+- 0x00, 0x00, 0x02, 0xFF, 0x3C);
+- ICNL9707_DCS(ICNL9707_CMD_PWRCON_CLK, 0x23, 0x01, 0x30, 0x34, 0x63);
+-
+- /* Disable abnormal power-off flag */
+- ICNL9707_DCS(ICNL9707_CMD_PWRCON_BTA, 0xA0, 0x22, 0x00, 0x44);
+-
+- ICNL9707_DCS(ICNL9707_CMD_PWRCON_MODE, 0x12, 0x63);
+-
+- /* Set VBP, VFP, VSW, HBP, HFP, HSW */
+- ICNL9707_DCS(ICNL9707_CMD_TCON, 0x0C, 0x16, 0x04, 0x0C, 0x10, 0x04);
+-
+- /* Set resolution */
+- ICNL9707_DCS(ICNL9707_CMD_TCON2, 0x11, 0x41);
+-
+- /* Set frame blanking */
+- ICNL9707_DCS(ICNL9707_CMD_TCON3, 0x22, 0x31, 0x04);
+-
+- ICNL9707_DCS(ICNL9707_CMD_SRCCON, 0x05, 0x23, 0x6B, 0x49, 0x00);
+-
+- /* Another undocumented command */
+- ICNL9707_DCS(0xC5, 0x00);
+-
+- ICNL9707_DCS(ICNL9707_CMD_ETC, 0x37, 0xFF, 0xFF);
+-
+- /* Another set of undocumented commands */
+- ICNL9707_DCS(0xD2, 0x63, 0x0B, 0x08, 0x88);
+- ICNL9707_DCS(0xD3, 0x01, 0x00, 0x00, 0x01, 0x01, 0x37, 0x25, 0x38, 0x31, 0x06, 0x07);
+-
+- /* Set Gamma to 2.2 */
+- ICNL9707_DCS(ICNL9707_CMD_SET_GAMMA,
+- 0x7C, 0x6A, 0x5D, 0x53, 0x53, 0x45, 0x4B,
+- 0x35, 0x4D, 0x4A, 0x49, 0x66, 0x53, 0x57,
+- 0x4A, 0x48, 0x3B, 0x2A, 0x06, 0x7C, 0x6A,
+- 0x5D, 0x53, 0x53, 0x45, 0x4B, 0x35, 0x4D,
+- 0x4A, 0x49, 0x66, 0x53, 0x57, 0x4A, 0x48,
+- 0x3B, 0x2A, 0x06);
+-
+- ICNL9707_DCS(ICNL9707_CMD_SRC_TIM, 0x00, 0x00, 0xFF, 0x00, 0x00, 0xFF, 0x00, 0x00);
+-
+- /* Another undocumented command */
+- ICNL9707_DCS(0xF4, 0x08, 0x77);
+-
+- ICNL9707_DCS(MIPI_DCS_SET_ADDRESS_MODE,
+- ICNL9707_MADCTL_RGB | ICNL9707_MADCTL_ML | ICNL9707_MADCTL_MH);
+-
+- /* Enable tearing mode at VBLANK */
+- err = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
+- if (err) {
+- dev_err(ctx->dev, "failed to enable vblank TE (%d)\n", err);
+- return err;
+- }
+-
+- /* Disable access to Level 2 registers */
+- ICNL9707_DCS(ICNL9707_CMD_PASSWORD2,
+- ICNL9707_P_PASSWORD2_DEFAULT,
+- ICNL9707_P_PASSWORD2_DEFAULT);
+- ICNL9707_DCS(ICNL9707_CMD_PASSWORD1,
+- ICNL9707_P_PASSWORD1_DEFAULT,
+- ICNL9707_P_PASSWORD1_DEFAULT);
++ dcs_write_seq(0xF0,0x5A,0x5A);
++ dcs_write_seq(0xF1,0xA5,0xA5);
++ dcs_write_seq(0xB6,0x0D,0x0D);
++ dcs_write_seq(0xB4,0x0A,0x08,0x12,0x10,0x0E,0x0C,0x00,0x00,0x00,0x03,0x00,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x04,0x06);
++ dcs_write_seq(0xB3,0x0B,0x09,0x13,0x11,0x0F,0x0D,0x00,0x00,0x00,0x03,0x00,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x05,0x07);
++ dcs_write_seq(0xB0,0x54,0x32,0x23,0x45,0x44,0x44,0x44,0x44,0x90,0x01,0x90,0x01);
++ dcs_write_seq(0xB1,0x32,0x84,0x02,0x83,0x30,0x01,0x6B,0x01);
++ dcs_write_seq(0xB2,0x73);
++ dcs_write_seq(0xBD,0x4E,0x0E,0x50,0x50,0x26,0x1D,0x00,0x14,0x42,0x03);
++ dcs_write_seq(0xB7,0x01,0x01,0x09,0x11,0x0D,0x55,0x19,0x19,0x21,0x1D,0x00,0x00,0x00,0x00,0x02,0xFF,0x3C);
++ dcs_write_seq(0xB8,0x23,0x01,0x30,0x34,0x63);
++ dcs_write_seq(0xB9,0xA0,0x22,0x00,0x44);
++ dcs_write_seq(0xBA,0x12,0x63);
++ dcs_write_seq(0xC1,0x0C,0x16,0x04,0x0C,0x10,0x04);
++ dcs_write_seq(0xC2,0x11,0x41);
++ dcs_write_seq(0xC3,0x22,0x31,0x04);
++ dcs_write_seq(0xC7,0x05,0x23,0x6B,0x49,0x00);
++ dcs_write_seq(0xC5,0x00);
++ dcs_write_seq(0xD0,0x37,0xFF,0xFF);
++ dcs_write_seq(0xD2,0x63,0x0B,0x08,0x88);
++ dcs_write_seq(0xD3,0x01,0x00,0x00,0x01,0x01,0x37,0x25,0x38,0x31,0x06,0x07);
++ dcs_write_seq(0xC8,0x7C,0x6A,0x5D,0x53,0x53,0x45,0x4B,0x35,0x4D,0x4A,0x49,0x66,0x53,0x57,0x4A,0x48,0x3B,0x2A,0x06,0x7C,0x6A,0x5D,0x53,0x53,0x45,0x4B,0x35,0x4D,0x4A,0x49,0x66,0x53,0x57,0x4A,0x48,0x3B,0x2A,0x06);//GAMMA2.2
++ dcs_write_seq(0xC6,0x00,0x00,0xFF,0x00,0x00,0xFF,0x00,0x00);
++ dcs_write_seq(0xF4,0x08,0x77);
++ dcs_write_seq(0x36,0x14);
++ dcs_write_seq(0x35,0x00);
++ dcs_write_seq(0xF1,0x5A,0x5A);
++ dcs_write_seq(0xF0,0xA5,0xA5);
+
+ return 0;
+ }
--- /dev/null
+From 6ea428297717faa16056076f7dd5a69e49c58fe6 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sun, 7 Aug 2022 23:34:35 -0500
+Subject: [PATCH 112/117] drm: panel: cwd686: Fix timings
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ drivers/gpu/drm/panel/panel-clockwork-cwd686.c | 18 +++++++++---------
+ 1 file changed, 9 insertions(+), 9 deletions(-)
+
+--- a/drivers/gpu/drm/panel/panel-clockwork-cwd686.c
++++ b/drivers/gpu/drm/panel/panel-clockwork-cwd686.c
+@@ -31,15 +31,15 @@ struct cwd686 {
+ };
+
+ static const struct drm_display_mode default_mode = {
+- .clock = 54465,
+- .hdisplay = 480,
+- .hsync_start = 480 + 150,
+- .hsync_end = 480 + 150 + 24,
+- .htotal = 480 + 150 + 24 + 40,
+- .vdisplay = 1280,
+- .vsync_start = 1280 + 12,
+- .vsync_end = 1280 + 12 + 6,
+- .vtotal = 1280 + 12 + 6 + 10,
++ .clock = 54465,
++ .hdisplay = 480,
++ .hsync_start = 480 + 64,
++ .hsync_end = 480 + 64 + 40,
++ .htotal = 480 + 64 + 40 + 110,
++ .vdisplay = 1280,
++ .vsync_start = 1280 + 16,
++ .vsync_end = 1280 + 16 + 10,
++ .vtotal = 1280 + 16 + 10 + 2,
+ };
+
+ static inline struct cwd686 *panel_to_cwd686(struct drm_panel *panel)
--- /dev/null
+From 16359ba0c5f5011e4742672454b35ad91a02fabe Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Mon, 8 Aug 2022 00:30:17 -0500
+Subject: [PATCH 113/117] drm: panel: cwd686: Disable burst
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ drivers/gpu/drm/panel/panel-clockwork-cwd686.c | 1 -
+ 1 file changed, 1 deletion(-)
+
+--- a/drivers/gpu/drm/panel/panel-clockwork-cwd686.c
++++ b/drivers/gpu/drm/panel/panel-clockwork-cwd686.c
+@@ -329,7 +329,6 @@ static int cwd686_probe(struct mipi_dsi_
+ dsi->lanes = 4;
+ dsi->format = MIPI_DSI_FMT_RGB888;
+ dsi->mode_flags = MIPI_DSI_MODE_VIDEO |
+- MIPI_DSI_MODE_VIDEO_BURST |
+ MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
+
+ ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
--- /dev/null
+From 02da00f2215f3d755ec806636fe499331870e8d6 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Tue, 9 Aug 2022 20:14:59 -0500
+Subject: [PATCH 114/117] drm: panel: cwd686: Use the init sequence from the
+ R-01 BSP
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ .../gpu/drm/panel/panel-clockwork-cwd686.c | 44 ++++++++-----------
+ 1 file changed, 19 insertions(+), 25 deletions(-)
+
+--- a/drivers/gpu/drm/panel/panel-clockwork-cwd686.c
++++ b/drivers/gpu/drm/panel/panel-clockwork-cwd686.c
+@@ -131,34 +131,28 @@ static int cwd686_init_sequence(struct c
+ {
+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+
+- dcs_write_seq(0xF0,0x5A,0x5A);
+- dcs_write_seq(0xF1,0xA5,0xA5);
+- dcs_write_seq(0xB6,0x0D,0x0D);
+- dcs_write_seq(0xB4,0x0A,0x08,0x12,0x10,0x0E,0x0C,0x00,0x00,0x00,0x03,0x00,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x04,0x06);
+- dcs_write_seq(0xB3,0x0B,0x09,0x13,0x11,0x0F,0x0D,0x00,0x00,0x00,0x03,0x00,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x05,0x07);
+- dcs_write_seq(0xB0,0x54,0x32,0x23,0x45,0x44,0x44,0x44,0x44,0x90,0x01,0x90,0x01);
+- dcs_write_seq(0xB1,0x32,0x84,0x02,0x83,0x30,0x01,0x6B,0x01);
++ dcs_write_seq(0xF0,0x5A,0x59);
++ dcs_write_seq(0xF1,0xA5,0xA6);
++ dcs_write_seq(0xB0,0x54,0x32,0x23,0x45,0x44,0x44,0x44,0x44,0x9F,0x00,0x01,0x9F,0x00,0x01);
++ dcs_write_seq(0xB1,0x32,0x84,0x02,0x83,0x29,0x06,0x06,0x72,0x06,0x06);
+ dcs_write_seq(0xB2,0x73);
+- dcs_write_seq(0xBD,0x4E,0x0E,0x50,0x50,0x26,0x1D,0x00,0x14,0x42,0x03);
+- dcs_write_seq(0xB7,0x01,0x01,0x09,0x11,0x0D,0x55,0x19,0x19,0x21,0x1D,0x00,0x00,0x00,0x00,0x02,0xFF,0x3C);
+- dcs_write_seq(0xB8,0x23,0x01,0x30,0x34,0x63);
+- dcs_write_seq(0xB9,0xA0,0x22,0x00,0x44);
+- dcs_write_seq(0xBA,0x12,0x63);
+- dcs_write_seq(0xC1,0x0C,0x16,0x04,0x0C,0x10,0x04);
+- dcs_write_seq(0xC2,0x11,0x41);
+- dcs_write_seq(0xC3,0x22,0x31,0x04);
+- dcs_write_seq(0xC7,0x05,0x23,0x6B,0x49,0x00);
+- dcs_write_seq(0xC5,0x00);
+- dcs_write_seq(0xD0,0x37,0xFF,0xFF);
+- dcs_write_seq(0xD2,0x63,0x0B,0x08,0x88);
+- dcs_write_seq(0xD3,0x01,0x00,0x00,0x01,0x01,0x37,0x25,0x38,0x31,0x06,0x07);
+- dcs_write_seq(0xC8,0x7C,0x6A,0x5D,0x53,0x53,0x45,0x4B,0x35,0x4D,0x4A,0x49,0x66,0x53,0x57,0x4A,0x48,0x3B,0x2A,0x06,0x7C,0x6A,0x5D,0x53,0x53,0x45,0x4B,0x35,0x4D,0x4A,0x49,0x66,0x53,0x57,0x4A,0x48,0x3B,0x2A,0x06);//GAMMA2.2
+- dcs_write_seq(0xC6,0x00,0x00,0xFF,0x00,0x00,0xFF,0x00,0x00);
+- dcs_write_seq(0xF4,0x08,0x77);
++ dcs_write_seq(0xB3,0x0B,0x09,0x13,0x11,0x0F,0x0D,0x00,0x00,0x00,0x03,0x00,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x05,0x07);
++ dcs_write_seq(0xB4,0x0A,0x08,0x12,0x10,0x0E,0x0C,0x00,0x00,0x00,0x03,0x00,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x04,0x06);
++ dcs_write_seq(0xB6,0x13,0x13);
++ dcs_write_seq(0xB8,0xB4,0x43,0x02,0xCC);
++ dcs_write_seq(0xB9,0xA5,0x20,0xFF,0xC8);
++ dcs_write_seq(0xBA,0x88,0x23);
++ dcs_write_seq(0xBD,0x43,0x0E,0x0E,0x50,0x50,0x29,0x10,0x03,0x44,0x03);
++ dcs_write_seq(0xC1,0x00,0x0C,0x16,0x04,0x00,0x30,0x10,0x04);
++ dcs_write_seq(0xC2,0x21,0x81);
++ dcs_write_seq(0xC3,0x02,0x30);
++ dcs_write_seq(0xC7,0x25,0x6A);
++ dcs_write_seq(0xC8,0x7C,0x68,0x59,0x4E,0x4B,0x3C,0x41,0x2B,0x44,0x43,0x43,0x60,0x4E,0x55,0x47,0x44,0x38,0x27,0x06,0x7C,0x68,0x59,0x4E,0x4B,0x3C,0x41,0x2B,0x44,0x43,0x43,0x60,0x4E,0x55,0x47,0x44,0x38,0x27,0x06);
++ dcs_write_seq(0xD4,0x00,0x00,0x00,0x32,0x04,0x51);
++ dcs_write_seq(0xF1,0x5A,0x59);
++ dcs_write_seq(0xF0,0xA5,0xA6);
+ dcs_write_seq(0x36,0x14);
+ dcs_write_seq(0x35,0x00);
+- dcs_write_seq(0xF1,0x5A,0x5A);
+- dcs_write_seq(0xF0,0xA5,0xA5);
+
+ return 0;
+ }
--- /dev/null
+From 6b438292e6b86a5cb5bffee2e517f1335903e39e Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Tue, 9 Aug 2022 20:15:24 -0500
+Subject: [PATCH 115/117] drm: panel: cwd686: Power up sequence
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ drivers/gpu/drm/panel/panel-clockwork-cwd686.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/drivers/gpu/drm/panel/panel-clockwork-cwd686.c
++++ b/drivers/gpu/drm/panel/panel-clockwork-cwd686.c
+@@ -218,12 +218,14 @@ static int cwd686_prepare(struct drm_pan
+ dev_err(ctx->dev, "failed to enable iovcc (%d)\n", err);
+ return err;
+ }
++ msleep(20);
+
+ err = regulator_enable(ctx->vci);
+ if (err) {
+ dev_err(ctx->dev, "failed to enable vci (%d)\n", err);
+ return err;
+ }
++ msleep(120);
+
+ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+ /* T2 */
--- /dev/null
+From a19565eccfdc0fce7f41cfe70cd67a1a10d2113c Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Tue, 9 Aug 2022 20:15:39 -0500
+Subject: [PATCH 116/117] drm: panel: cwd686: Why is this not getting called?
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ drivers/gpu/drm/panel/panel-clockwork-cwd686.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/drivers/gpu/drm/panel/panel-clockwork-cwd686.c
++++ b/drivers/gpu/drm/panel/panel-clockwork-cwd686.c
+@@ -373,6 +373,8 @@ static void cwd686_remove(struct mipi_ds
+
+ mipi_dsi_detach(dsi);
+ drm_panel_remove(&ctx->panel);
++ if (ctx->prepared)
++ cwd686_unprepare(&ctx->panel);
+ }
+
+ static const struct of_device_id cwd686_of_match[] = {
--- /dev/null
+From d6036571b774437bb3bdd378821033e118a01fe8 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Wed, 2 Nov 2022 23:42:52 -0500
+Subject: [PATCH 117/117] riscv: dts: allwinner: d1: Add video engine node
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi | 30 ++++++++++++++++++++
+ 1 file changed, 30 insertions(+)
+
+--- a/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
++++ b/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
+@@ -105,6 +105,21 @@
+ status = "reserved";
+ };
+
++ ve: video-codec@1c0e000 {
++ compatible = "allwinner,sun20i-d1-video-engine";
++ reg = <0x1c0e000 0x2000>;
++ interrupts = <82 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_VE>,
++ <&ccu CLK_VE>,
++ <&ccu CLK_MBUS_VE>;
++ clock-names = "ahb", "mod", "ram";
++ resets = <&ccu RST_BUS_VE>;
++ allwinner,sram = <&ve_sram 1>;
++ interconnects = <&mbus 4>;
++ interconnect-names = "dma-mem";
++ iommus = <&iommu 0>;
++ };
++
+ pio: pinctrl@2000000 {
+ compatible = "allwinner,sun20i-d1-pinctrl";
+ reg = <0x2000000 0x800>;
+@@ -591,6 +606,21 @@
+ #address-cells = <1>;
+ #size-cells = <1>;
+
++ // FIXME: Address is not verified. It is copied from A64/H6.
++ sram@1d00000 {
++ compatible = "mmio-sram";
++ reg = <0x1d00000 0x40000>;
++ ranges = <0 0x1d00000 0x40000>;
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ ve_sram: sram-section@0 {
++ compatible = "allwinner,sun20i-d1-sram-c1",
++ "allwinner,sun4i-a10-sram-c1";
++ reg = <0 0x40000>;
++ };
++ };
++
+ regulators@3000150 {
+ compatible = "allwinner,sun20i-d1-system-ldos";
+ reg = <0x3000150 0x4>;
projects / openwrt / staging / jow.git / commitdiff