Looks identical to the v2.
This PR adds support for a popular low-cost 2.4GHz N based AP
Specifications:
- SoC: Qualcomm Atheros QCA9533 (650MHz)
- RAM: 64MB
- Storage: 8 MB SPI NOR
- Wireless: 2.4GHz N based built into SoC 2x2
- Ethernet: 1x 100/10 Mbps, integrated into SoC, 24V POE IN
Installation:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Robert Marko <robimarko@gmail.com>
[Rebased, adjusted for separate tplink-safeloader entry, dynamic partitioning]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
;;
cpe210|\
cpe210-v2|\
+cpe210-v3|\
cpe510|\
wbs210|\
wbs510)
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:link4" "wlan0" "76" "100" "-75" "13"
case "$board" in
- cpe210-v2)
+ cpe210-v2|\
+ cpe210-v3)
ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan0" "eth0"
;;
*)
cf-e380ac-v1|\
cf-e380ac-v2|\
cpe210-v2|\
+ cpe210-v3|\
dr342|\
eap120|\
eap300v2|\
name="cpe210-v2"
tplink_pharos_board_detect "$(tplink_pharos_v2_get_model_string)"
;;
+ *"CPE210 v3")
+ name="cpe210-v3"
+ tplink_pharos_board_detect "$(tplink_pharos_v2_get_model_string)"
+ ;;
*"CPE505N")
name="cpe505n"
;;
tplink_pharos_check_image "$1" "7f454c46" "$(tplink_pharos_get_model_string)" '' && return 0
return 1
;;
- cpe210-v2)
+ cpe210-v2|\
+ cpe210-v3)
tplink_pharos_check_image "$1" "01000000" "$(tplink_pharos_v2_get_model_string)" '\0\xff\r' && return 0
return 1
;;
MIPS_MACHINE(ATH79_MACH_CPE210_V2, "CPE210V2", "TP-LINK CPE210 v2",
cpe210_v2_setup);
+MIPS_MACHINE(ATH79_MACH_CPE210_V3, "CPE210V3", "TP-LINK CPE210 v3",
+ cpe210_v2_setup);
+
MIPS_MACHINE(ATH79_MACH_CPE510, "CPE510", "TP-LINK CPE510/520",
cpe510_setup);
ATH79_MACH_CF_E530N, /* COMFAST CF-E530N */
ATH79_MACH_CPE210, /* TP-LINK CPE210 v1 */
ATH79_MACH_CPE210_V2, /* TP-LINK CPE210 v2 */
+ ATH79_MACH_CPE210_V3, /* TP-LINK CPE210 v3 */
ATH79_MACH_CPE505N, /* P&W CPE505N */
ATH79_MACH_CPE510, /* TP-LINK CPE510 */
ATH79_MACH_CPE830, /* YunCore CPE830 */
endef
TARGET_DEVICES += cpe210-v2
+define Device/cpe210-v3
+ $(Device/tplink-safeloader)
+ DEVICE_TITLE := TP-LINK CPE210 v3
+ BOARDNAME := CPE210V3
+ TPLINK_BOARD_ID := CPE210V3
+ TPLINK_HWID := 0x0
+ TPLINK_HWREV := 0
+ MTDPARTS := spi0.0:128k(u-boot)ro,64k(partition-table)ro,64k(product-info)ro,7680k(firmware),192k(config)ro,64k(ART)ro
+ IMAGE_SIZE := 7680k
+ KERNEL := kernel-bin | patch-cmdline | lzma | tplink-v1-header -O
+ KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | tplink-v1-header
+ DEVICE_PACKAGES := rssileds
+endef
+TARGET_DEVICES += cpe210-v3
+
define Device/wbs210-v1
$(Device/cpe510-520-v1)
DEVICE_TITLE := TP-LINK WBS210 v1