--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca9557.dtsi"
+
+/ {
+ compatible = "zyxel,nbg6716", "qca,qca9558";
+ model = "ZyXEL NBG6716";
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ aliases {
+ led-boot = &power;
+ led-failsafe = &power;
+ led-running = &power;
+ led-upgrade = &power;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power: power {
+ label = "nbg6716:white:power";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "nbg6716:white:internet";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ };
+
+ usb1 {
+ label = "nbg6716:white:usb1";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "usbport";
+ trigger-sources = <&hub_port0>;
+ };
+
+ usb2 {
+ label = "nbg6716:white:usb2";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "usbport";
+ trigger-sources = <&hub_port1>;
+ };
+
+ wifi2 {
+ label = "nbg6716:white:wifi2";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wifi5 {
+ label = "nbg6716:white:wifi5";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wps {
+ label = "nbg6716:white:wps";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wifi_button {
+ label = "WiFi button";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ usb1 {
+ label = "USB1 eject button";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ usb2 {
+ label = "USB2 eject button";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "WPS button";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&gpio {
+ gpio_usb_power {
+ gpio-hog;
+ gpios = <16 0>;
+ output-high;
+ line-name = "nbg6716:power:usb";
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+ num-cs = <1>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ uboot_env: partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ art: partition@50000 {
+ label = "art";
+ reg = <0x050000 0x010000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "nbu";
+ reg = <0x060000 0xfa0000>;
+ };
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "zyxel_rfsd";
+ reg = <0x0 0x200000>;
+ };
+
+ partition@200000 {
+ label = "romd";
+ reg = <0x200000 0x200000>;
+ };
+
+ partition@400000 {
+ label = "header";
+ reg = <0x400000 0x100000>;
+ };
+
+ firmware@500000 {
+ label = "firmware";
+ reg = <0x500000 0x7b00000>;
+ };
+
+ partition@500000 {
+ label = "kernel";
+ reg = <0x500000 0x400000>;
+ };
+
+ partition@900000 {
+ label = "ubi";
+ reg = <0x900000 0x7700000>;
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <17>;
+ phy-mode = "rgmii-id";
+ };
+
+ switch0@1f {
+ compatible = "qca,ar8327";
+ reg = <0x1f>;
+ qca,ar8327-initvals = <
+ 0x04 0x87600000 /* PORT0 PAD MODE CTRL */
+ 0x0c 0x00080080 /* PORT6 PAD MODE CTRL */
+ 0x10 0x81000080 /* POWER_ON_STRIP */
+ 0x50 0xffb7ffb7 /* LED_CTRL0 */
+ 0x54 0xffb7ffb7 /* LED_CTRL1 */
+ 0x58 0xffb7ffb7 /* LED_CTRL2 */
+ 0x5c 0x03ffff00 /* LED_CTRL3 */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ 0x94 0x0000007e /* PORT6 STATUS */
+ >;
+ };
+};
+
+&mdio1 {
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ phy-mode = "sgmii";
+ };
+};
+
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0xa6000000 0x00000101 0x00001616>;
+ phy-handle = <&phy0>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ pll-data = <0x03000101 0x00000101 0x00001616>;
+ phy-handle = <&phy1>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gpio {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+
+ wifi@0,0 {
+ compatible = "qcom,ath10k";
+ reg = <0 0 0 0 0>;
+ qcom,ath10k-calibration-variant = "ZyXEL-NBG6716";
+ };
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb_phy1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+
+ hub_port0: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+
+};
+
+&usb1 {
+ status = "okay";
+
+ hub_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+# attention: only zlib compression is allowed for the boot fs
+define Build/zyxel-buildkerneljffs
+ rm -rf $(KDIR_TMP)/zyxelnbg6716
+ mkdir -p $(KDIR_TMP)/zyxelnbg6716/image/boot
+ cp $@ $(KDIR_TMP)/zyxelnbg6716/image/boot/vmlinux.lzma.uImage
+ $(STAGING_DIR_HOST)/bin/mkfs.jffs2 \
+ --big-endian --squash-uids -v -e 128KiB -q -f -n -x lzma -x rtime \
+ -o $@ \
+ -d $(KDIR_TMP)/zyxelnbg6716/image
+ rm -rf $(KDIR_TMP)/zyxelnbg6716
+endef
+
+define Build/zyxel-factory
+ let \
+ maxsize="$(subst k,* 1024,$(RAS_ROOTFS_SIZE))"; \
+ let size="$$(stat -c%s $@)"; \
+ if [ $$size -lt $$maxsize ]; then \
+ $(STAGING_DIR_HOST)/bin/mkrasimage \
+ -b $(RAS_BOARD) \
+ -v $(RAS_VERSION) \
+ -r $@ \
+ -s $$maxsize \
+ -o $@.new \
+ -l 131072 \
+ && mv $@.new $@ ; \
+ fi
+endef
+
define Device/glinet_gl-ar300m-nand
ATH_SOC := qca9531
DEVICE_VENDOR := GL.iNet
IMAGE/factory.ubi := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
endef
TARGET_DEVICES += glinet_gl-ar300m-nand
+
+define Device/zyxel_nbg6716
+ ATH_SOC := qca9558
+ DEVICE_VENDOR := ZyXEL
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct
+ RAS_BOARD := NBG6716
+ RAS_ROOTFS_SIZE := 29696k
+ RAS_VERSION := "OpenWrt Linux-$(LINUX_VERSION)"
+ KERNEL_SIZE := 4096k
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL := kernel-bin | append-dtb | uImage none | \
+ zyxel-buildkerneljffs | check-size 4096k
+ IMAGES := sysupgrade.tar sysupgrade-4M-Kernel.bin factory.bin
+ IMAGE/sysupgrade.tar/squashfs := append-rootfs | pad-to $$$${BLOCKSIZE} | sysupgrade-tar rootfs=$$$$@ | append-metadata
+ IMAGE/sysupgrade-4M-Kernel.bin/squashfs := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | pad-to 263192576 | gzip
+ IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | zyxel-factory
+ UBINIZE_OPTS := -E 5
+endef
+TARGET_DEVICES += zyxel_nbg6716
+DEVICE_VARS += RAS_ROOTFS_SIZE RAS_BOARD RAS_VERSION
projects / openwrt / staging / dangole.git / commitdiff