Changes for U-Boot 1.1.3:
======================================================================
+* Minor fixes to PM854 board
+ Patch by Josef Wagner, 03 Aug 2005
+
* Adjust configuration of XENIAX board
(chip select and GPIO required for USB operation)
/*
* Determine DDR configuration from I2C interface.
*/
- #define SPD_EEPROM_ADDRESS 0x51 /* DDR DIMM */
+ #define SPD_EEPROM_ADDRESS 0x58 /* DDR DIMM */
#else
/*
#undef CFG_RAMBOOT
#endif
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI
+#define CFG_FLASH_EMPTY_INFO
+
+#undef CONFIG_CLOCKS_IN_MHZ
+
/*
* Local Bus Definitions
*/
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_MPC85XX_TSEC1 1
#define CONFIG_MPC85XX_TSEC2 1
-#define TSEC1_PHY_ADDR 2
-#define TSEC2_PHY_ADDR 3
+#define TSEC1_PHY_ADDR 0
+#define TSEC2_PHY_ADDR 1
#define TSEC1_PHYIDX 0
#define TSEC2_PHYIDX 0
#define CONFIG_MPC85XX_FEC 1
-#define FEC_PHY_ADDR 1
+#define FEC_PHY_ADDR 3
#define FEC_PHYIDX 0
-#define CONFIG_ETHPRIME "MOTO ENET0"
+#define CONFIG_ETHPRIME "ENET0"
#define CONFIG_HAS_ETH1 1
#define CONFIG_HAS_ETH2 1
#define CONFIG_ETH2ADDR 00:40:42:01:00:02
#endif
-#define CONFIG_IPADDR 192.168.0.103
-#define CONFIG_HOSTNAME PM854
-#define CONFIG_ROOTPATH /opt/eldk30/ppc_82xx
-#define CONFIG_BOOTFILE uImage
+#define CONFIG_ROOTPATH /opt/eldk/ppc_85xx
+#define CONFIG_BOOTFILE pm854/uImage
-#define CONFIG_SERVERIP 192.168.0.54
+#define CONFIG_HOSTNAME pm854
+#define CONFIG_IPADDR 192.168.0.103
+#define CONFIG_SERVERIP 192.168.0.64
#define CONFIG_GATEWAYIP 192.168.0.1
#define CONFIG_NETMASK 255.255.255.0
"netdev=eth0\0" \
"consoledev=ttyS0\0" \
"ramdiskaddr=400000\0" \
- "ramdiskfile=uRamdisk\0"
+ "ramdiskfile=pm854/uRamdisk\0"
#define CONFIG_NFSBOOTCOMMAND \
"setenv bootargs root=/dev/nfs rw " \