--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mtd/partitions/uimage.h>
+
+/ {
+ model = "Atheros DB120 reference board";
+ compatible = "atheros,db120", "qca,ar9344";
+
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wlan2g {
+ label = "green:wlan2g";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wlan5g {
+ label = "green:wlan5g";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ led_system: system {
+ label = "green:system";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ usb {
+ label = "green:usb";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&hub_port1>;
+ linux,default-trigger = "usbport";
+ };
+ };
+
+ leds-ath9k {
+ compatible = "gpio-leds";
+
+ wlan5g-ath {
+ label = "green:wlan5g-ath";
+ gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ wps {
+ linux,code = <KEY_WPS_BUTTON>;
+ label = "WPS button";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ virtual_flash {
+ compatible = "mtd-concat";
+ devices = <&fwconcat0 &fwconcat1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x0 0x0>;
+ label = "firmware";
+ compatible = "openwrt,uimage", "denx,uimage";
+ openwrt,ih-magic = <IH_MAGIC_OKLI>;
+ };
+ };
+ };
+};
+
+&ref {
+ clock-frequency = <40000000>;
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ read-only;
+ };
+
+ fwconcat0: partition@50000 {
+ label = "fwconcat0";
+ reg = <0x050000 0x630000>;
+ };
+
+ partition@680000 {
+ label = "loader";
+ reg = <0x680000 0x010000>;
+ };
+
+ fwconcat1: partition@690000 {
+ label = "fwconcat1";
+ reg = <0x690000 0x150000>;
+ };
+
+ partition@7e0000 {
+ label = "nvram";
+ reg = <0x7e0000 0x010000>;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0x06000000 0x00000101 0x00001616>;
+
+ nvmem-cells = <&macaddr_art_0>;
+ nvmem-cell-names = "mac-address";
+
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
+ 0x10 0xc1000000 /* POWER_ON_STRAP */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ 0x94 0x0000007e /* PORT6_STATUS */
+ >;
+ };
+};
+
+&pinmux {
+ pmx_led_wan_lan: pinmux_led_wan_lan {
+ pinctrl-single,bits = <0x10 0x2c2d0000 0xffff0000>,
+ <0x14 0x292a2b 0xffffff>;
+ };
+};
+
+&builtin_switch {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmx_led_wan_lan>;
+
+ /delete-property/qca,phy4-mii-enable;
+};
+
+ð1 {
+ status = "okay";
+
+ nvmem-cells = <&macaddr_art_6>;
+ nvmem-cell-names = "mac-address";
+
+ gmac-config {
+ device = <&gmac>;
+ switch-phy-swap = <0>;
+ switch-only-mode = <1>;
+ };
+};
+
+&pcie {
+ status = "okay";
+
+ ath9k: wifi@0,0 {
+ compatible = "pci168c,0030";
+ reg = <0x0000 0 0 0 0>;
+ qca,no-eeprom;
+ qca,disable-2ghz;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
+
+&usb {
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hub_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&art {
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_art_0: macaddr@0 {
+ reg = <0x0 0x6>;
+ };
+
+ macaddr_art_6: macaddr@6 {
+ reg = <0x6 0x6>;
+ };
+};
endef
TARGET_DEVICES += aruba_ap-105
+define Device/atheros_db120
+ SOC := ar9344
+ DEVICE_VENDOR := Atheros
+ DEVICE_MODEL := DB120
+ DEVICE_PACKAGES := kmod-usb2
+ IMAGE_SIZE := 7808k
+ SUPPORTED_DEVICES += db120
+ LOADER_TYPE := bin
+ LOADER_FLASH_OFFS := 0x50000
+ KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49
+ COMPILE := loader-$(1).bin loader-$(1).uImage
+ COMPILE/loader-$(1).bin := loader-okli-compile
+ COMPILE/loader-$(1).uImage := append-loader-okli $(1) | pad-to 64k | lzma | \
+ uImage lzma
+ IMAGES += factory.bin
+ IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
+ append-rootfs | pad-rootfs | check-size | pad-to 6336k | \
+ append-loader-okli-uimage $(1) | pad-to 64k
+endef
+TARGET_DEVICES += atheros_db120
+
define Device/avm
DEVICE_VENDOR := AVM
KERNEL := kernel-bin | append-dtb | lzma | eva-image
projects / openwrt / staging / nbd.git / commitdiff