ar71xx: fix TL-WR842N v2 switch port order

The TL-WR842N v2 has the following switch port layout with swconfig port 0
being connected to eth1:

            Power  LAN4    LAN3    LAN2    LAN1    WAN     USB
             (*) | [...] | [...] | [...] | [...] | [...] | [.]
    swconfig port:   1       4       3       2      n/a
    netdev:        eth1    eth1    eth1    eth1    eth0

Adjust the board defaults to match this model specific layout.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 2f603af817d18a77ea625c4a312aa9361a19cea1..d23d243861624a477fb9a1abc53efaf871d3d5fd 100755 (executable)
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -265,7 +265,6 @@ ar71xx_setup_interfaces()
        tl-mr3420-v2|\
        tl-wdr6500-v2|\
        tl-wr841n-v8|\
-       tl-wr842n-v2|\
        tl-wr941nd-v5|\
        tl-wr941nd-v6|\
        wnr1000-v2|\
@@ -388,6 +387,11 @@ ar71xx_setup_interfaces()
                ucidef_set_interface_raw "eth" "eth0"
                ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
                ;;
+       tl-wr842n-v2)
+               ucidef_set_interfaces_lan_wan "eth1" "eth0"
+               ucidef_add_switch "switch0" \
+                       "0@eth1" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
+               ;;
        uap-pro|\
        wpj342)
                ucidef_add_switch "switch0" \