ipq40xx: add support for YYeTs LE1

Hardware Highlights:
SoC:	  Qualcomm IPQ4019 717 MHz
RAM:	  512M NT5CC256M16ER-EK
Flash:    32M SPI NOR MX25L25635F
WIFI1:    2.4 GHz 2T2R integrated
WIFI2:    5 GHz 2T2R integrated
Ethernet: QCA8075 (4x LAN, 1x WAN)
LEDS:     power, wlan2g, wlan5g, usb
USB:      1x 3.0
Button:   Reset

Installation:
  Upload factory.bin in stock firmware's upgrade
  page, and this will take a few minutes.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>

diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network
index 614afa8590dace0974077c44b710c61317a434b1..5353cd398dc6e6eaf9b7810a3728305d0fe046d6 100644 (file)
--- a/target/linux/ipq40xx/base-files/etc/board.d/02_network
+++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network
@@ -25,6 +25,7 @@ ipq40xx_setup_interfaces()
        p2w,r619ac-128m|\
        pakedge,wr-1|\
        teltonika,rutx50|\
+       yyets,le1|\
        zyxel,nbg6617)
                ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
                ;;

diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-le1.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-le1.dts
new file mode 100644 (file)
index 0000000..282a0ea
--- /dev/null
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-le1.dts
@@ -0,0 +1,326 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+       model = "YYeTs LE1";
+       compatible = "yyets,le1";
+
+       aliases {
+               led-boot = &led_usb;
+               led-failsafe = &led_usb;
+               led-upgrade = &led_usb;
+
+               ethernet0 = &swport5;
+               ethernet1 = &gmac;
+               label-mac-device = &gmac;
+       };
+
+       keys {
+               compatible = "gpio-keys";
+
+               reset {
+                       label = "reset";
+                       gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               led_usb: usb {
+                       label = "green:usb";
+                       gpios = <&tlmm 36 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "usbport";
+                       trigger-sources = <&usb3_port1>, <&usb3_port2>, <&usb2_port1>;
+               };
+
+               wlan2g {
+                       label = "green:wlan2g";
+                       gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy0tpt";
+               };
+
+               wlan5g {
+                       label = "green:wlan5g";
+                       gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy1tpt";
+               };
+       };
+
+       soc {
+               tcsr@1949000 {
+                       compatible = "qcom,tcsr";
+                       reg = <0x1949000 0x100>;
+                       qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+               };
+
+               tcsr@194b000 {
+                       compatible = "qcom,tcsr";
+                       reg = <0x194b000 0x100>;
+                       qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+               };
+
+               ess_tcsr@1953000 {
+                       compatible = "qcom,tcsr";
+                       reg = <0x1953000 0x1000>;
+                       qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+               };
+
+               tcsr@1957000 {
+                       compatible = "qcom,tcsr";
+                       reg = <0x1957000 0x100>;
+                       qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+               };
+       };
+};
+
+&blsp_dma {
+       status = "okay";
+};
+
+&blsp1_spi1 {
+       cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+       pinctrl-0 = <&spi_0_pins>;
+       pinctrl-names = "default";
+       status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               #address-cells = <1>;
+               #size-cells = <1>;
+               reg = <0>;
+               spi-max-frequency = <24000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "SBL1";
+                               reg = <0x0 0x40000>;
+                               read-only;
+                       };
+
+                       partition@40000 {
+                               label = "MIBIB";
+                               reg = <0x40000 0x20000>;
+                               read-only;
+                       };
+
+                       partition@60000 {
+                               label = "QSEE";
+                               reg = <0x60000 0x60000>;
+                               read-only;
+                       };
+
+                       partition@c0000 {
+                               label = "CDT";
+                               reg = <0xc0000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@d0000 {
+                               label = "DDRPARAMS";
+                               reg = <0xd0000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@e0000 {
+                               label = "APPSBLENV";
+                               reg = <0xe0000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@f0000 {
+                               label = "APPSBL";
+                               reg = <0xf0000 0x80000>;
+                               read-only;
+                       };
+
+                       partition@170000 {
+                               label = "ART";
+                               reg = <0x170000 0x10000>;
+                               read-only;
+
+                               compatible = "nvmem-cells";
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+
+                               precal_art_1000: precal@1000 {
+                                       reg = <0x1000 0x2f20>;
+                               };
+
+                               precal_art_5000: precal@5000 {
+                                       reg = <0x5000 0x2f20>;
+                               };
+                       };
+
+                       partition@180000 {
+                               compatible = "denx,fit";
+                               label = "firmware";
+                               reg = <0x180000 0x1e80000>;
+                       };
+               };
+       };
+};
+
+&blsp1_uart1 {
+       pinctrl-0 = <&serial_pins>;
+       pinctrl-names = "default";
+       status = "okay";
+};
+
+&cryptobam {
+       status = "okay";
+};
+
+&crypto {
+       status = "okay";
+};
+
+&gmac {
+       status = "okay";
+};
+
+&mdio {
+       pinctrl-0 = <&mdio_pins>;
+       pinctrl-names = "default";
+       status = "okay";
+};
+
+&prng {
+       status = "okay";
+};
+
+&switch {
+       status = "okay";
+};
+
+&swport1 {
+       status = "okay";
+};
+
+&swport2 {
+       status = "okay";
+};
+
+&swport3 {
+       status = "okay";
+};
+
+&swport4 {
+       status = "okay";
+};
+
+&swport5 {
+       status = "okay";
+};
+
+&tlmm {
+       mdio_pins: mdio_pinmux {
+               mux_1 {
+                       pins = "gpio6";
+                       function = "mdio";
+                       bias-pull-up;
+               };
+               mux_2 {
+                       pins = "gpio7";
+                       function = "mdc";
+                       bias-pull-up;
+               };
+       };
+
+       serial_pins: serial_pinmux {
+               mux {
+                       pins = "gpio16", "gpio17";
+                       function = "blsp_uart0";
+                       bias-disable;
+               };
+       };
+
+       spi_0_pins: spi_0_pinmux {
+               pinmux {
+                       function = "blsp_spi0";
+                       pins = "gpio13", "gpio14", "gpio15";
+                       drive-strength = <12>;
+                       bias-disable;
+               };
+
+               pinmux_cs {
+                       function = "gpio";
+                       pins = "gpio12";
+                       drive-strength = <2>;
+                       bias-disable;
+                       output-high;
+               };
+       };
+};
+
+&usb2 {
+       status = "okay";
+
+       dwc3@6000000 {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               usb2_port1: port@1 {
+                       reg = <1>;
+                       #trigger-source-cells = <0>;
+               };
+       };
+};
+
+&usb2_hs_phy {
+       status = "okay";
+};
+
+&usb3 {
+       status = "okay";
+
+       dwc3@8a00000 {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               usb3_port1: port@1 {
+                       reg = <1>;
+                       #trigger-source-cells = <0>;
+               };
+
+               usb3_port2: port@2 {
+                       reg = <2>;
+                       #trigger-source-cells = <0>;
+               };
+       };
+};
+
+&usb3_hs_phy {
+       status = "okay";
+};
+
+&usb3_ss_phy {
+       status = "okay";
+};
+
+&watchdog {
+       status = "okay";
+};
+
+&wifi0 {
+       status = "okay";
+       nvmem-cells = <&precal_art_1000>;
+       nvmem-cell-names = "pre-calibration";
+       qcom,ath10k-calibration-variant = "YYeTs-LE1";
+};
+
+&wifi1 {
+       status = "okay";
+       nvmem-cells = <&precal_art_5000>;
+       nvmem-cell-names = "pre-calibration";
+       qcom,ath10k-calibration-variant = "YYeTs-LE1";
+};

diff --git a/target/linux/ipq40xx/image/generic.mk b/target/linux/ipq40xx/image/generic.mk
index 8fd7ab291531a16dc2dd8fe252f8bea6e98754fe..6dd4549f8df8575151b1f0d633cee1b2d6bba58e 100644 (file)
--- a/target/linux/ipq40xx/image/generic.mk
+++ b/target/linux/ipq40xx/image/generic.mk
@@ -1122,6 +1122,20 @@ define Device/wallys_dr40x9
 endef
 TARGET_DEVICES += wallys_dr40x9
 
+define Device/yyets_le1
+       $(call Device/FitzImage)
+       DEVICE_VENDOR := YYeTs
+       DEVICE_MODEL := LE1
+       SOC := qcom-ipq4019
+       KERNEL_SIZE := 4096k
+       IMAGE_SIZE := 31232k
+       IMAGES += factory.bin
+       IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
+       IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+       DEVICE_PACKAGES := ipq-wifi-yyets_le1 kmod-usb-ledtrig-usbport
+endef
+TARGET_DEVICES += yyets_le1
+
 define Device/zte_mf18a
        $(call Device/FitImage)
        DEVICE_VENDOR := ZTE