This is in preperation of using generic cross OMAP code.
Signed-off-by: Nishanth Menon <nm@ti.com>
Tested-by: Matt Porter <mporter@konsulko.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
--- /dev/null
+/*
+ * (C) Copyright 2006-2008
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Syed Mohammed Khasim <x0khasim@ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _OMAP3_H_
+#define _OMAP3_H_
+
+/* Stuff on L3 Interconnect */
+#define SMX_APE_BASE 0x68000000
+
+/* GPMC */
+#define OMAP34XX_GPMC_BASE 0x6E000000
+
+/* SMS */
+#define OMAP34XX_SMS_BASE 0x6C000000
+
+/* SDRC */
+#define OMAP34XX_SDRC_BASE 0x6D000000
+
+/*
+ * L4 Peripherals - L4 Wakeup and L4 Core now
+ */
+#define OMAP34XX_CORE_L4_IO_BASE 0x48000000
+#define OMAP34XX_WAKEUP_L4_IO_BASE 0x48300000
+#define OMAP34XX_ID_L4_IO_BASE 0x4830A200
+#define OMAP34XX_L4_PER 0x49000000
+#define OMAP34XX_L4_IO_BASE OMAP34XX_CORE_L4_IO_BASE
+
+/* DMA4/SDMA */
+#define OMAP34XX_DMA4_BASE 0x48056000
+
+/* CONTROL */
+#define OMAP34XX_CTRL_BASE (OMAP34XX_L4_IO_BASE + 0x2000)
+
+#ifndef __ASSEMBLY__
+/* Signal Integrity Parameter Control Registers */
+struct control_prog_io {
+ unsigned char res[0x408];
+ unsigned int io2; /* 0x408 */
+ unsigned char res2[0x38];
+ unsigned int io0; /* 0x444 */
+ unsigned int io1; /* 0x448 */
+};
+#endif /* __ASSEMBLY__ */
+
+/* Bit definition for CONTROL_PROG_IO1 */
+#define PRG_I2C2_PULLUPRESX 0x00000001
+
+/* UART */
+#define OMAP34XX_UART1 (OMAP34XX_L4_IO_BASE + 0x6a000)
+#define OMAP34XX_UART2 (OMAP34XX_L4_IO_BASE + 0x6c000)
+#define OMAP34XX_UART3 (OMAP34XX_L4_PER + 0x20000)
+#define OMAP34XX_UART4 (OMAP34XX_L4_PER + 0x42000)
+
+/* General Purpose Timers */
+#define OMAP34XX_GPT1 0x48318000
+#define OMAP34XX_GPT2 0x49032000
+#define OMAP34XX_GPT3 0x49034000
+#define OMAP34XX_GPT4 0x49036000
+#define OMAP34XX_GPT5 0x49038000
+#define OMAP34XX_GPT6 0x4903A000
+#define OMAP34XX_GPT7 0x4903C000
+#define OMAP34XX_GPT8 0x4903E000
+#define OMAP34XX_GPT9 0x49040000
+#define OMAP34XX_GPT10 0x48086000
+#define OMAP34XX_GPT11 0x48088000
+#define OMAP34XX_GPT12 0x48304000
+
+/* WatchDog Timers (1 secure, 3 GP) */
+#define WD1_BASE 0x4830C000
+#define WD2_BASE 0x48314000
+#define WD3_BASE 0x49030000
+
+/* 32KTIMER */
+#define SYNC_32KTIMER_BASE 0x48320000
+
+#ifndef __ASSEMBLY__
+
+struct s32ktimer {
+ unsigned char res[0x10];
+ unsigned int s32k_cr; /* 0x10 */
+};
+
+#endif /* __ASSEMBLY__ */
+
+#ifndef __ASSEMBLY__
+struct gpio {
+ unsigned char res1[0x34];
+ unsigned int oe; /* 0x34 */
+ unsigned int datain; /* 0x38 */
+ unsigned char res2[0x54];
+ unsigned int cleardataout; /* 0x90 */
+ unsigned int setdataout; /* 0x94 */
+};
+#endif /* __ASSEMBLY__ */
+
+#define GPIO0 (0x1 << 0)
+#define GPIO1 (0x1 << 1)
+#define GPIO2 (0x1 << 2)
+#define GPIO3 (0x1 << 3)
+#define GPIO4 (0x1 << 4)
+#define GPIO5 (0x1 << 5)
+#define GPIO6 (0x1 << 6)
+#define GPIO7 (0x1 << 7)
+#define GPIO8 (0x1 << 8)
+#define GPIO9 (0x1 << 9)
+#define GPIO10 (0x1 << 10)
+#define GPIO11 (0x1 << 11)
+#define GPIO12 (0x1 << 12)
+#define GPIO13 (0x1 << 13)
+#define GPIO14 (0x1 << 14)
+#define GPIO15 (0x1 << 15)
+#define GPIO16 (0x1 << 16)
+#define GPIO17 (0x1 << 17)
+#define GPIO18 (0x1 << 18)
+#define GPIO19 (0x1 << 19)
+#define GPIO20 (0x1 << 20)
+#define GPIO21 (0x1 << 21)
+#define GPIO22 (0x1 << 22)
+#define GPIO23 (0x1 << 23)
+#define GPIO24 (0x1 << 24)
+#define GPIO25 (0x1 << 25)
+#define GPIO26 (0x1 << 26)
+#define GPIO27 (0x1 << 27)
+#define GPIO28 (0x1 << 28)
+#define GPIO29 (0x1 << 29)
+#define GPIO30 (0x1 << 30)
+#define GPIO31 (0x1 << 31)
+
+/* base address for indirect vectors (internal boot mode) */
+#define SRAM_OFFSET0 0x40000000
+#define SRAM_OFFSET1 0x00200000
+#define SRAM_OFFSET2 0x0000F800
+#define SRAM_VECT_CODE (SRAM_OFFSET0 | SRAM_OFFSET1 | \
+ SRAM_OFFSET2)
+#define SRAM_CLK_CODE (SRAM_VECT_CODE + 64)
+
+#define NON_SECURE_SRAM_START 0x40208000 /* Works for GP & EMU */
+#define NON_SECURE_SRAM_END 0x40210000
+
+#define LOW_LEVEL_SRAM_STACK 0x4020FFFC
+
+/* scratch area - accessible on both EMU and GP */
+#define OMAP3_PUBLIC_SRAM_SCRATCH_AREA NON_SECURE_SRAM_START
+
+#define DEBUG_LED1 149 /* gpio */
+#define DEBUG_LED2 150 /* gpio */
+
+#define XDR_POP 5 /* package on package part */
+#define SDR_DISCRETE 4 /* 128M memory SDR module */
+#define DDR_STACKED 3 /* stacked part on 2422 */
+#define DDR_COMBO 2 /* combo part on cpu daughter card */
+#define DDR_DISCRETE 1 /* 2x16 parts on daughter card */
+
+#define DDR_100 100 /* type found on most mem d-boards */
+#define DDR_111 111 /* some combo parts */
+#define DDR_133 133 /* most combo, some mem d-boards */
+#define DDR_165 165 /* future parts */
+
+#define CPU_3430 0x3430
+
+/*
+ * 343x real hardware:
+ * ES1 = rev 0
+ *
+ * ES2 onwards, the value maps to contents of IDCODE register [31:28].
+ *
+ * Note : CPU_3XX_ES20 is used in cache.S. Please review before changing.
+ */
+#define CPU_3XX_ES10 0
+#define CPU_3XX_ES20 1
+#define CPU_3XX_ES21 2
+#define CPU_3XX_ES30 3
+#define CPU_3XX_ES31 4
+#define CPU_3XX_ES312 7
+#define CPU_3XX_MAX_REV 8
+
+/*
+ * 37xx real hardware:
+ * ES1.0 onwards, the value maps to contents of IDCODE register [31:28].
+ */
+
+#define CPU_37XX_ES10 0
+#define CPU_37XX_ES11 1
+#define CPU_37XX_ES12 2
+#define CPU_37XX_MAX_REV 3
+
+#define CPU_3XX_ID_SHIFT 28
+
+#define WIDTH_8BIT 0x0000
+#define WIDTH_16BIT 0x1000 /* bit pos for 16 bit in gpmc */
+
+/*
+ * Hawkeye values
+ */
+#define HAWKEYE_OMAP34XX 0xb7ae
+#define HAWKEYE_AM35XX 0xb868
+#define HAWKEYE_OMAP36XX 0xb891
+
+#define HAWKEYE_SHIFT 12
+
+/*
+ * Define CPU families
+ */
+#define CPU_OMAP34XX 0x3400 /* OMAP34xx/OMAP35 devices */
+#define CPU_AM35XX 0x3500 /* AM35xx devices */
+#define CPU_OMAP36XX 0x3600 /* OMAP36xx devices */
+
+/*
+ * Control status register values corresponding to cpu variants
+ */
+#define OMAP3503 0x5c00
+#define OMAP3515 0x1c00
+#define OMAP3525 0x4c00
+#define OMAP3530 0x0c00
+
+#define AM3505 0x5c00
+#define AM3517 0x1c00
+
+#define OMAP3730 0x0c00
+
+/*
+ * ROM code API related flags
+ */
+#define OMAP3_GP_ROMCODE_API_L2_INVAL 1
+#define OMAP3_GP_ROMCODE_API_WRITE_ACR 3
+
+/*
+ * EMU device PPA HAL related flags
+ */
+#define OMAP3_EMU_HAL_API_L2_INVAL 40
+#define OMAP3_EMU_HAL_API_WRITE_ACR 42
+
+#define OMAP3_EMU_HAL_START_HAL_CRITICAL 4
+
+/* ABB settings */
+#define OMAP_ABB_SETTLING_TIME 30
+#define OMAP_ABB_CLOCK_CYCLES 8
+
+/* ABB tranxdone mask */
+#define OMAP_ABB_MPU_TXDONE_MASK (0x1 << 26)
+
+#endif
+++ /dev/null
-/*
- * (C) Copyright 2006-2008
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- * Syed Mohammed Khasim <x0khasim@ti.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _OMAP3_H_
-#define _OMAP3_H_
-
-/* Stuff on L3 Interconnect */
-#define SMX_APE_BASE 0x68000000
-
-/* GPMC */
-#define OMAP34XX_GPMC_BASE 0x6E000000
-
-/* SMS */
-#define OMAP34XX_SMS_BASE 0x6C000000
-
-/* SDRC */
-#define OMAP34XX_SDRC_BASE 0x6D000000
-
-/*
- * L4 Peripherals - L4 Wakeup and L4 Core now
- */
-#define OMAP34XX_CORE_L4_IO_BASE 0x48000000
-#define OMAP34XX_WAKEUP_L4_IO_BASE 0x48300000
-#define OMAP34XX_ID_L4_IO_BASE 0x4830A200
-#define OMAP34XX_L4_PER 0x49000000
-#define OMAP34XX_L4_IO_BASE OMAP34XX_CORE_L4_IO_BASE
-
-/* DMA4/SDMA */
-#define OMAP34XX_DMA4_BASE 0x48056000
-
-/* CONTROL */
-#define OMAP34XX_CTRL_BASE (OMAP34XX_L4_IO_BASE + 0x2000)
-
-#ifndef __ASSEMBLY__
-/* Signal Integrity Parameter Control Registers */
-struct control_prog_io {
- unsigned char res[0x408];
- unsigned int io2; /* 0x408 */
- unsigned char res2[0x38];
- unsigned int io0; /* 0x444 */
- unsigned int io1; /* 0x448 */
-};
-#endif /* __ASSEMBLY__ */
-
-/* Bit definition for CONTROL_PROG_IO1 */
-#define PRG_I2C2_PULLUPRESX 0x00000001
-
-/* UART */
-#define OMAP34XX_UART1 (OMAP34XX_L4_IO_BASE + 0x6a000)
-#define OMAP34XX_UART2 (OMAP34XX_L4_IO_BASE + 0x6c000)
-#define OMAP34XX_UART3 (OMAP34XX_L4_PER + 0x20000)
-#define OMAP34XX_UART4 (OMAP34XX_L4_PER + 0x42000)
-
-/* General Purpose Timers */
-#define OMAP34XX_GPT1 0x48318000
-#define OMAP34XX_GPT2 0x49032000
-#define OMAP34XX_GPT3 0x49034000
-#define OMAP34XX_GPT4 0x49036000
-#define OMAP34XX_GPT5 0x49038000
-#define OMAP34XX_GPT6 0x4903A000
-#define OMAP34XX_GPT7 0x4903C000
-#define OMAP34XX_GPT8 0x4903E000
-#define OMAP34XX_GPT9 0x49040000
-#define OMAP34XX_GPT10 0x48086000
-#define OMAP34XX_GPT11 0x48088000
-#define OMAP34XX_GPT12 0x48304000
-
-/* WatchDog Timers (1 secure, 3 GP) */
-#define WD1_BASE 0x4830C000
-#define WD2_BASE 0x48314000
-#define WD3_BASE 0x49030000
-
-/* 32KTIMER */
-#define SYNC_32KTIMER_BASE 0x48320000
-
-#ifndef __ASSEMBLY__
-
-struct s32ktimer {
- unsigned char res[0x10];
- unsigned int s32k_cr; /* 0x10 */
-};
-
-#endif /* __ASSEMBLY__ */
-
-#ifndef __ASSEMBLY__
-struct gpio {
- unsigned char res1[0x34];
- unsigned int oe; /* 0x34 */
- unsigned int datain; /* 0x38 */
- unsigned char res2[0x54];
- unsigned int cleardataout; /* 0x90 */
- unsigned int setdataout; /* 0x94 */
-};
-#endif /* __ASSEMBLY__ */
-
-#define GPIO0 (0x1 << 0)
-#define GPIO1 (0x1 << 1)
-#define GPIO2 (0x1 << 2)
-#define GPIO3 (0x1 << 3)
-#define GPIO4 (0x1 << 4)
-#define GPIO5 (0x1 << 5)
-#define GPIO6 (0x1 << 6)
-#define GPIO7 (0x1 << 7)
-#define GPIO8 (0x1 << 8)
-#define GPIO9 (0x1 << 9)
-#define GPIO10 (0x1 << 10)
-#define GPIO11 (0x1 << 11)
-#define GPIO12 (0x1 << 12)
-#define GPIO13 (0x1 << 13)
-#define GPIO14 (0x1 << 14)
-#define GPIO15 (0x1 << 15)
-#define GPIO16 (0x1 << 16)
-#define GPIO17 (0x1 << 17)
-#define GPIO18 (0x1 << 18)
-#define GPIO19 (0x1 << 19)
-#define GPIO20 (0x1 << 20)
-#define GPIO21 (0x1 << 21)
-#define GPIO22 (0x1 << 22)
-#define GPIO23 (0x1 << 23)
-#define GPIO24 (0x1 << 24)
-#define GPIO25 (0x1 << 25)
-#define GPIO26 (0x1 << 26)
-#define GPIO27 (0x1 << 27)
-#define GPIO28 (0x1 << 28)
-#define GPIO29 (0x1 << 29)
-#define GPIO30 (0x1 << 30)
-#define GPIO31 (0x1 << 31)
-
-/* base address for indirect vectors (internal boot mode) */
-#define SRAM_OFFSET0 0x40000000
-#define SRAM_OFFSET1 0x00200000
-#define SRAM_OFFSET2 0x0000F800
-#define SRAM_VECT_CODE (SRAM_OFFSET0 | SRAM_OFFSET1 | \
- SRAM_OFFSET2)
-#define SRAM_CLK_CODE (SRAM_VECT_CODE + 64)
-
-#define NON_SECURE_SRAM_START 0x40208000 /* Works for GP & EMU */
-#define NON_SECURE_SRAM_END 0x40210000
-
-#define LOW_LEVEL_SRAM_STACK 0x4020FFFC
-
-/* scratch area - accessible on both EMU and GP */
-#define OMAP3_PUBLIC_SRAM_SCRATCH_AREA NON_SECURE_SRAM_START
-
-#define DEBUG_LED1 149 /* gpio */
-#define DEBUG_LED2 150 /* gpio */
-
-#define XDR_POP 5 /* package on package part */
-#define SDR_DISCRETE 4 /* 128M memory SDR module */
-#define DDR_STACKED 3 /* stacked part on 2422 */
-#define DDR_COMBO 2 /* combo part on cpu daughter card */
-#define DDR_DISCRETE 1 /* 2x16 parts on daughter card */
-
-#define DDR_100 100 /* type found on most mem d-boards */
-#define DDR_111 111 /* some combo parts */
-#define DDR_133 133 /* most combo, some mem d-boards */
-#define DDR_165 165 /* future parts */
-
-#define CPU_3430 0x3430
-
-/*
- * 343x real hardware:
- * ES1 = rev 0
- *
- * ES2 onwards, the value maps to contents of IDCODE register [31:28].
- *
- * Note : CPU_3XX_ES20 is used in cache.S. Please review before changing.
- */
-#define CPU_3XX_ES10 0
-#define CPU_3XX_ES20 1
-#define CPU_3XX_ES21 2
-#define CPU_3XX_ES30 3
-#define CPU_3XX_ES31 4
-#define CPU_3XX_ES312 7
-#define CPU_3XX_MAX_REV 8
-
-/*
- * 37xx real hardware:
- * ES1.0 onwards, the value maps to contents of IDCODE register [31:28].
- */
-
-#define CPU_37XX_ES10 0
-#define CPU_37XX_ES11 1
-#define CPU_37XX_ES12 2
-#define CPU_37XX_MAX_REV 3
-
-#define CPU_3XX_ID_SHIFT 28
-
-#define WIDTH_8BIT 0x0000
-#define WIDTH_16BIT 0x1000 /* bit pos for 16 bit in gpmc */
-
-/*
- * Hawkeye values
- */
-#define HAWKEYE_OMAP34XX 0xb7ae
-#define HAWKEYE_AM35XX 0xb868
-#define HAWKEYE_OMAP36XX 0xb891
-
-#define HAWKEYE_SHIFT 12
-
-/*
- * Define CPU families
- */
-#define CPU_OMAP34XX 0x3400 /* OMAP34xx/OMAP35 devices */
-#define CPU_AM35XX 0x3500 /* AM35xx devices */
-#define CPU_OMAP36XX 0x3600 /* OMAP36xx devices */
-
-/*
- * Control status register values corresponding to cpu variants
- */
-#define OMAP3503 0x5c00
-#define OMAP3515 0x1c00
-#define OMAP3525 0x4c00
-#define OMAP3530 0x0c00
-
-#define AM3505 0x5c00
-#define AM3517 0x1c00
-
-#define OMAP3730 0x0c00
-
-/*
- * ROM code API related flags
- */
-#define OMAP3_GP_ROMCODE_API_L2_INVAL 1
-#define OMAP3_GP_ROMCODE_API_WRITE_ACR 3
-
-/*
- * EMU device PPA HAL related flags
- */
-#define OMAP3_EMU_HAL_API_L2_INVAL 40
-#define OMAP3_EMU_HAL_API_WRITE_ACR 42
-
-#define OMAP3_EMU_HAL_START_HAL_CRITICAL 4
-
-/* ABB settings */
-#define OMAP_ABB_SETTLING_TIME 30
-#define OMAP_ABB_CLOCK_CYCLES 8
-
-/* ABB tranxdone mask */
-#define OMAP_ABB_MPU_TXDONE_MASK (0x1 << 26)
-
-#endif
#define CONFIG_EMIF4 /* The chip has EMIF4 controller */
#include <asm/arch/cpu.h> /* get chip and board defs */
-#include <asm/arch/omap3.h>
+#include <asm/arch/omap.h>
/*
* Display CPU and Board information
#define CONFIG_EMIF4 /* The chip has EMIF4 controller */
#include <asm/arch/cpu.h> /* get chip and board defs */
-#include <asm/arch/omap3.h>
+#include <asm/arch/omap.h>
/*
* Display CPU and Board information
#define CONFIG_SDRC /* The chip has SDRC controller */
#include <asm/arch/cpu.h> /* get chip and board defs */
-#include <asm/arch/omap3.h>
+#include <asm/arch/omap.h>
/*
* Display CPU and Board information
#define CONFIG_EMIF4 /* The chip has EMIF4 controller */
#include <asm/arch/cpu.h> /* get chip and board defs */
-#include <asm/arch/omap3.h>
+#include <asm/arch/omap.h>
/*
* Display CPU and Board information
#define CONFIG_SDRC /* The chip has SDRC controller */
#include <asm/arch/cpu.h> /* get chip and board defs */
-#include <asm/arch/omap3.h>
+#include <asm/arch/omap.h>
/*
* Display CPU and Board information
#define CONFIG_EMIF4 /* The chip has EMIF4 controller */
#include <asm/arch/cpu.h> /* get chip and board defs */
-#include <asm/arch/omap3.h>
+#include <asm/arch/omap.h>
#define CONFIG_OF_LIBFDT
#define CONFIG_FIT
#define CONFIG_SDRC /* The chip has SDRC controller */
#include <asm/arch/cpu.h> /* get chip and board defs */
-#include <asm/arch/omap3.h>
+#include <asm/arch/omap.h>
#include <asm/arch/mem.h>
#include <linux/stringify.h>
#define __OMAP3EVM_CONFIG_H
#include <asm/arch/cpu.h>
-#include <asm/arch/omap3.h>
+#include <asm/arch/omap.h>
/* ----------------------------------------------------------------------------
* Supported U-boot commands
#define __OMAP3_EVM_QUICK_MMC_H
#include <asm/arch/cpu.h>
-#include <asm/arch/omap3.h>
+#include <asm/arch/omap.h>
/* ----------------------------------------------------------------------------
* Supported U-boot commands
#define __OMAP3_EVM_QUICK_NAND_H
#include <asm/arch/cpu.h>
-#include <asm/arch/omap3.h>
+#include <asm/arch/omap.h>
/* ----------------------------------------------------------------------------
* Supported U-boot commands
#define CONFIG_SDRC /* The chip has SDRC controller */
#include <asm/arch/cpu.h> /* get chip and board defs */
-#include <asm/arch/omap3.h>
+#include <asm/arch/omap.h>
/*
* Display CPU and Board information
#define CONFIG_SDRC /* The chip has SDRC controller */
#include <asm/arch/cpu.h> /* get chip and board defs */
-#include <asm/arch/omap3.h>
+#include <asm/arch/omap.h>
/*
* Display CPU and Board information
#define CONFIG_SDRC /* The chip has SDRC controller */
#include <asm/arch/cpu.h> /* get chip and board defs */
-#include <asm/arch/omap3.h>
+#include <asm/arch/omap.h>
/*
* Display CPU and Board information
#define CONFIG_SDRC /* The chip has SDRC controller */
#include <asm/arch/cpu.h> /* get chip and board defs */
-#include <asm/arch/omap3.h>
+#include <asm/arch/omap.h>
/*
* NOTE: these #defines presume standard SDP jumper settings.
#define CONFIG_NAND
#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
#include <asm/arch/cpu.h> /* get chip and board defs */
-#include <asm/arch/omap3.h>
+#include <asm/arch/omap.h>
#include <configs/ti_omap3_common.h>
/* Remove SPL boot option - we do not support that on LDP yet */
#define CONFIG_EMIF4 /* The chip has EMIF4 controller */
#include <asm/arch/cpu.h> /* get chip and board defs */
-#include <asm/arch/omap3.h>
+#include <asm/arch/omap.h>
/*
* Display CPU and Board information
#define CONFIG_SDRC /* Has an SDRC controller */
#include <asm/arch/cpu.h> /* get chip and board defs */
-#include <asm/arch/omap3.h>
+#include <asm/arch/omap.h>
/*
* Display CPU and Board information
#include <asm/arch/cpu.h>
-#include <asm/arch/omap3.h>
+#include <asm/arch/omap.h>
#ifndef CONFIG_SPL_BUILD
# define CONFIG_OMAP_SERIAL
#define CONFIG_SDRC /* The chip has SDRC controller */
#include <asm/arch/cpu.h> /* get chip and board defs */
-#include <asm/arch/omap3.h>
+#include <asm/arch/omap.h>
#define CONFIG_SYS_GENERIC_BOARD
projects / project / bcm63xx / u-boot.git / commitdiff