want more explanation of a feature in terms of common code, review the common
ftrace.txt file.
+Ideally, everyone who wishes to retain performance while supporting tracing in
+their kernel should make it all the way to dynamic ftrace support.
+
Prerequisites
-------------
exiting of a function. On exit, the value is compared and if it does not
match, then it will panic the kernel. This is largely a sanity check for bad
code generation with gcc. If gcc for your port sanely updates the frame
-pointer under different opitmization levels, then ignore this option.
+pointer under different optimization levels, then ignore this option.
However, adding support for it isn't terribly difficult. In your assembly code
that calls prepare_ftrace_return(), pass the frame pointer as the 3rd argument.
HAVE_SYSCALL_TRACEPOINTS
----------------------
+------------------------
You need very few things to get the syscalls tracing in an arch.
HAVE_FTRACE_MCOUNT_RECORD
-------------------------
-See scripts/recordmcount.pl for more info.
+See scripts/recordmcount.pl for more info. Just fill in the arch-specific
+details for how to locate the addresses of mcount call sites via objdump.
+This option doesn't make much sense without also implementing dynamic ftrace.
+
+HAVE_DYNAMIC_FTRACE
+-------------------
+
+You will first need HAVE_FTRACE_MCOUNT_RECORD and HAVE_FUNCTION_TRACER, so
+scroll your reader back up if you got over eager.
+
+Once those are out of the way, you will need to implement:
+ - asm/ftrace.h:
+ - MCOUNT_ADDR
+ - ftrace_call_adjust()
+ - struct dyn_arch_ftrace{}
+ - asm code:
+ - mcount() (new stub)
+ - ftrace_caller()
+ - ftrace_call()
+ - ftrace_stub()
+ - C code:
+ - ftrace_dyn_arch_init()
+ - ftrace_make_nop()
+ - ftrace_make_call()
+ - ftrace_update_ftrace_func()
+
+First you will need to fill out some arch details in your asm/ftrace.h.
+
+Define MCOUNT_ADDR as the address of your mcount symbol similar to:
+ #define MCOUNT_ADDR ((unsigned long)mcount)
+Since no one else will have a decl for that function, you will need to:
+ extern void mcount(void);
+
+You will also need the helper function ftrace_call_adjust(). Most people
+will be able to stub it out like so:
+ static inline unsigned long ftrace_call_adjust(unsigned long addr)
+ {
+ return addr;
+ }
<details to be filled>
+Lastly you will need the custom dyn_arch_ftrace structure. If you need
+some extra state when runtime patching arbitrary call sites, this is the
+place. For now though, create an empty struct:
+ struct dyn_arch_ftrace {
+ /* No extra data needed */
+ };
+
+With the header out of the way, we can fill out the assembly code. While we
+did already create a mcount() function earlier, dynamic ftrace only wants a
+stub function. This is because the mcount() will only be used during boot
+and then all references to it will be patched out never to return. Instead,
+the guts of the old mcount() will be used to create a new ftrace_caller()
+function. Because the two are hard to merge, it will most likely be a lot
+easier to have two separate definitions split up by #ifdefs. Same goes for
+the ftrace_stub() as that will now be inlined in ftrace_caller().
+
+Before we get confused anymore, let's check out some pseudo code so you can
+implement your own stuff in assembly:
-HAVE_DYNAMIC_FTRACE
----------------------
+void mcount(void)
+{
+ return;
+}
+
+void ftrace_caller(void)
+{
+ /* implement HAVE_FUNCTION_TRACE_MCOUNT_TEST if you desire */
+
+ /* save all state needed by the ABI (see paragraph above) */
+
+ unsigned long frompc = ...;
+ unsigned long selfpc = <return address> - MCOUNT_INSN_SIZE;
+
+ftrace_call:
+ ftrace_stub(frompc, selfpc);
+
+ /* restore all state needed by the ABI */
+
+ftrace_stub:
+ return;
+}
+
+This might look a little odd at first, but keep in mind that we will be runtime
+patching multiple things. First, only functions that we actually want to trace
+will be patched to call ftrace_caller(). Second, since we only have one tracer
+active at a time, we will patch the ftrace_caller() function itself to call the
+specific tracer in question. That is the point of the ftrace_call label.
+
+With that in mind, let's move on to the C code that will actually be doing the
+runtime patching. You'll need a little knowledge of your arch's opcodes in
+order to make it through the next section.
+
+Every arch has an init callback function. If you need to do something early on
+to initialize some state, this is the time to do that. Otherwise, this simple
+function below should be sufficient for most people:
+
+int __init ftrace_dyn_arch_init(void *data)
+{
+ /* return value is done indirectly via data */
+ *(unsigned long *)data = 0;
+
+ return 0;
+}
+
+There are two functions that are used to do runtime patching of arbitrary
+functions. The first is used to turn the mcount call site into a nop (which
+is what helps us retain runtime performance when not tracing). The second is
+used to turn the mcount call site into a call to an arbitrary location (but
+typically that is ftracer_caller()). See the general function definition in
+linux/ftrace.h for the functions:
+ ftrace_make_nop()
+ ftrace_make_call()
+The rec->ip value is the address of the mcount call site that was collected
+by the scripts/recordmcount.pl during build time.
+
+The last function is used to do runtime patching of the active tracer. This
+will be modifying the assembly code at the location of the ftrace_call symbol
+inside of the ftrace_caller() function. So you should have sufficient padding
+at that location to support the new function calls you'll be inserting. Some
+people will be using a "call" type instruction while others will be using a
+"branch" type instruction. Specifically, the function is:
+ ftrace_update_ftrace_func()
+
+
+HAVE_DYNAMIC_FTRACE + HAVE_FUNCTION_GRAPH_TRACER
+------------------------------------------------
+
+The function grapher needs a few tweaks in order to work with dynamic ftrace.
+Basically, you will need to:
+ - update:
+ - ftrace_caller()
+ - ftrace_graph_call()
+ - ftrace_graph_caller()
+ - implement:
+ - ftrace_enable_ftrace_graph_caller()
+ - ftrace_disable_ftrace_graph_caller()
<details to be filled>
+Quick notes:
+ - add a nop stub after the ftrace_call location named ftrace_graph_call;
+ stub needs to be large enough to support a call to ftrace_graph_caller()
+ - update ftrace_graph_caller() to work with being called by the new
+ ftrace_caller() since some semantics may have changed
+ - ftrace_enable_ftrace_graph_caller() will runtime patch the
+ ftrace_graph_call location with a call to ftrace_graph_caller()
+ - ftrace_disable_ftrace_graph_caller() will runtime patch the
+ ftrace_graph_call location with nops
projects / openwrt / staging / blogic.git / commitdiff