It is broken and it is not maintained by anyone since long time.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34765
+++ /dev/null
-#
-# Copyright (C) 2007 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-
-ARCH:=powerpc
-BOARD:=ps3
-BOARDNAME:=Sony PS3 Game Console
-MAINTAINER:=Geoff Levand <geoffrey.levand@am.sony.com>
-SUBTARGETS=petitboot
-FEATURES:=powerpc64 broken
-
-LINUX_VERSION:=2.6.30.10
-
-KERNEL_CC:=
-
-include $(INCLUDE_DIR)/target.mk
-
-define Target/Description
- Build for the Sony PS3 Game Console
-
- The OpenWRT build will create both a 1st stage PS3-Linux image
- suitable for programming into the PS3 flash memory, and a 2nd
- stage PS3-Linux image suitable for loading via bootloaders or
- the kexec utility.
-
- Enable the Petitboot package to build a PS3 bootloader.
-endef
-
-KERNELNAME:="zImage"
-
-$(eval $(call BuildTarget))
+++ /dev/null
-OpenWRT on the Sony PS3 Game Console
-
-The OpenWRT build will create both a 1st stage PS3-Linux image
-suitable for programming into the PS3 flash memory, and a 2nd
-stage PS3-Linux image suitable for loading via bootloaders or
-the kexec utility.
-
-The 2nd stage image is convenient for testing new builds. It can
-be loaded from disk, USB device, or the network by an existing
-Other OS bootloader. After the 2nd stage image is tested and
-found to be good, the 1st stage image can then be programmed into
-flash memory. It is recommended to use this method during
-development to avoid corrupting the flash memory contents, which
-requires a reboot to the Game OS to repair.
-
-Known good Other OS bootloader images and installation information
-can be found here:
-
- http://www.kernel.org/pub/linux/kernel/people/geoff/cell/
-
-The 2nd stage image file is bin/openwrt-ps3-vmlinux.elf. It can
-be loaded with an entry in the bootloader config file. It has
-no initrd file.
-
-The 1st stage image is named bin/otheros.bld. It can be programmed
-into flash memory either from Linux or the Game OS. From Linux,
-use the command:
-
- ps3-flash-util -w otheros.bld
-
-From the Game OS, use the menu item 'Install Other OS'.
-
-Tips on how to recover your PS3-Linux system when it hangs up or no
-longer boots can be found here:
-
- http://www.kernel.org/pub/linux/kernel/people/geoff/cell/ps3-howto/ps3-boot-recovery-howto.txt
-
-To alter the kernel command line options, run 'make kernel_menuconfig'
-and go to 'Kernel Options' -> 'Initial kernel command string'.
-
-The default video behavior is to autodetect the monitor capabilities,
-which should work for most monitors. More info on video modes can be
-found in the man page of the ps3-video-mode utility.
+++ /dev/null
-CONFIG_64BIT=y
-CONFIG_ALTIVEC=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_ARCH_HAS_ILOG2_U64=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_ARCH_MEMORY_PROBE=y
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_ARPD is not set
-CONFIG_AUDIT_ARCH=y
-# CONFIG_BINARY_PRINTF is not set
-CONFIG_BITREVERSE=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=65535
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_BLOCK_COMPAT=y
-# CONFIG_BOOTX_TEXT is not set
-CONFIG_BOUNCE=y
-# CONFIG_BRIDGE is not set
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_CMDLINE=""
-CONFIG_CMDLINE_BOOL=y
-CONFIG_COMPAT=y
-CONFIG_COMPAT_BINFMT_ELF=y
-CONFIG_COMPAT_BRK=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-# CONFIG_CRYPTO is not set
-# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_DEVKMEM=y
-CONFIG_DNOTIFY=y
-CONFIG_DTC=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_ELF_CORE=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT4DEV_COMPAT is not set
-CONFIG_EXT4_FS=y
-# CONFIG_EXT4_FS_XATTR is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAT_FS=y
-CONFIG_FB=y
-CONFIG_FB_PS3=y
-CONFIG_FB_PS3_DEFAULT_SIZE_M=9
-CONFIG_FB_SYS_COPYAREA=y
-CONFIG_FB_SYS_FILLRECT=y
-CONFIG_FB_SYS_FOPS=y
-CONFIG_FB_SYS_IMAGEBLIT=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x16=y
-CONFIG_FONT_8x8=y
-CONFIG_FORCE_MAX_ZONEORDER=13
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FRAME_WARN=2048
-# CONFIG_FSL_ULI1575 is not set
-CONFIG_GELIC_NET=y
-# CONFIG_GELIC_WIRELESS is not set
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_GENERIC_IOMAP is not set
-CONFIG_GENERIC_ISA_DMA=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_GENERIC_TIME_VSYSCALL=y
-# CONFIG_GEN_RTC is not set
-CONFIG_GROUP_SCHED=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_HANGCHECK_TIMER is not set
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-# CONFIG_HAS_RAPIDIO is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_LMB=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_SETUP_PER_CPU_AREA=y
-CONFIG_HAVE_SYSCALL_WRAPPERS=y
-CONFIG_HID=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_HID_SUPPORT=y
-# CONFIG_HIGH_RES_TIMERS is not set
-# CONFIG_HUGETLBFS is not set
-CONFIG_HW_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-CONFIG_INITRAMFS_ROOT_GID=500
-CONFIG_INITRAMFS_ROOT_UID=500
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_INPUT=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_JOYSTICK=y
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_YEALINK is not set
-CONFIG_IOMMU_HELPER=y
-# CONFIG_IOMMU_VMERGE is not set
-# CONFIG_IPIC is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_IRQ_ALL_CPUS is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_ISA_DMA_API=y
-CONFIG_ISO9660_FS=y
-CONFIG_JBD=y
-CONFIG_JBD2=y
-# CONFIG_JOYSTICK_A3D is not set
-# CONFIG_JOYSTICK_ADI is not set
-# CONFIG_JOYSTICK_ANALOG is not set
-# CONFIG_JOYSTICK_COBRA is not set
-# CONFIG_JOYSTICK_GF2K is not set
-# CONFIG_JOYSTICK_GRIP is not set
-# CONFIG_JOYSTICK_GRIP_MP is not set
-# CONFIG_JOYSTICK_GUILLEMOT is not set
-# CONFIG_JOYSTICK_IFORCE is not set
-# CONFIG_JOYSTICK_INTERACT is not set
-# CONFIG_JOYSTICK_JOYDUMP is not set
-# CONFIG_JOYSTICK_MAGELLAN is not set
-# CONFIG_JOYSTICK_SIDEWINDER is not set
-# CONFIG_JOYSTICK_SPACEBALL is not set
-# CONFIG_JOYSTICK_SPACEORB is not set
-# CONFIG_JOYSTICK_STINGER is not set
-# CONFIG_JOYSTICK_TMDC is not set
-# CONFIG_JOYSTICK_TWIDJOY is not set
-# CONFIG_JOYSTICK_WARRIOR is not set
-# CONFIG_JOYSTICK_XPAD is not set
-# CONFIG_JOYSTICK_ZHENHUA is not set
-CONFIG_KERNEL_START=0xc000000000000000
-CONFIG_KEXEC=y
-# CONFIG_LEDS_TRIGGERS is not set
-CONFIG_LOCK_KERNEL=y
-# CONFIG_LOGO is not set
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_MEMORY_HOTPLUG=y
-CONFIG_MEMORY_HOTPLUG_SPARSE=y
-# CONFIG_MEMORY_HOTREMOVE is not set
-CONFIG_MIGRATION=y
-# CONFIG_MINI_FO is not set
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-CONFIG_MSDOS_FS=y
-# CONFIG_MTD is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_NETWORK_FILESYSTEMS is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NR_CPUS=2
-# CONFIG_NUMA is not set
-CONFIG_OF=y
-CONFIG_OF_DEVICE=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PAGE_OFFSET=0xc000000000000000
-# CONFIG_PARTITION_ADVANCED is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_POWER3=y
-CONFIG_POWER4=y
-# CONFIG_POWER4_ONLY is not set
-CONFIG_PPC=y
-CONFIG_PPC64=y
-# CONFIG_PPC_970_NAP is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_PPC_CELL=y
-# CONFIG_PPC_CELLEB is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_CELL_QPACE is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_PPC_DCR_MMIO is not set
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-CONFIG_PPC_FPU=y
-# CONFIG_PPC_HAS_HASH_64K is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_IBM_CELL_BLADE is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_PPC_ISERIES is not set
-# CONFIG_PPC_MAPLE is not set
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_PPC_MPC106 is not set
-CONFIG_PPC_OF=y
-# CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
-# CONFIG_PPC_PASEMI is not set
-CONFIG_PPC_PCI_CHOICE=y
-# CONFIG_PPC_PMAC is not set
-CONFIG_PPC_PS3=y
-# CONFIG_PPC_PSERIES is not set
-# CONFIG_PPC_RTAS is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_64=y
-# CONFIG_PPC_UDBG_16550 is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_PRINT_STACK_DEPTH=64
-CONFIG_PROC_DEVICETREE=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_PS3_ADVANCED=y
-CONFIG_PS3_DISK=y
-# CONFIG_PS3_DYNAMIC_DMA is not set
-CONFIG_PS3_FLASH=y
-CONFIG_PS3_HTAB_SIZE=20
-# CONFIG_PS3_LPM is not set
-CONFIG_PS3_PS3AV=y
-CONFIG_PS3_ROM=y
-CONFIG_PS3_STORAGE=y
-CONFIG_PS3_SYS_MANAGER=y
-# CONFIG_PS3_VRAM is not set
-CONFIG_PS3_VUART=y
-# CONFIG_RD_LZMA is not set
-# CONFIG_RELOCATABLE is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-# CONFIG_SCHED_SMT is not set
-CONFIG_SCSI=y
-# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_PROC_FS is not set
-# CONFIG_SERIAL_8250 is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_SMP=y
-CONFIG_SPARSEMEM=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_MANUAL=y
-# CONFIG_SPARSEMEM_VMEMMAP is not set
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-# CONFIG_SPU_BASE is not set
-# CONFIG_SPU_FS is not set
-# CONFIG_SQUASHFS is not set
-CONFIG_STOP_MACHINE=y
-# CONFIG_SWAP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_SYSVIPC_COMPAT=y
-# CONFIG_TEXTSEARCH is not set
-CONFIG_TRACING_SUPPORT=y
-CONFIG_TUNE_CELL=y
-# CONFIG_U3_DART is not set
-CONFIG_USB=y
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_PPC_OF=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-CONFIG_USB_HID=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_HCD_PPC_OF is not set
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USER_SCHED=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-CONFIG_VFAT_FS=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-CONFIG_VIRT_CPU_ACCOUNTING=y
-# CONFIG_VLAN_8021Q is not set
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_VSX is not set
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_WATCHDOG is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WLAN_80211 is not set
-CONFIG_WORD_SIZE=64
-# CONFIG_ZISOFS is not set
+++ /dev/null
-#
-# Copyright (C) 2007-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/image.mk
-
-define Image/Prepare
- cp $(LINUX_DIR)/arch/powerpc/boot/otheros.bld $(KDIR)/image
-endef
-
-define Image/BuildKernel
- mkdir -p $(BIN_DIR)
- cp $(KDIR)/image $(BIN_DIR)/otheros.bld
- cp $(KDIR)/vmlinux.elf $(BIN_DIR)/$(IMG_PREFIX)-vmlinux.elf
- cp $(BIN_DIR)/$(IMG_PREFIX)-vmlinux.elf $(TARGET_DIR)
-endef
-
-$(eval $(call BuildImage))
+++ /dev/null
-#
-# Copyright (C) 2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define KernelPackage/ps3lan
- SUBMENU:=Network Devices
- TITLE:=PS3-Lan support
- DEPENDS:=@TARGET_ps3
- KCONFIG:= \
- CONFIG_GELIC_NET \
- CONFIG_GELIC_WIRELESS=y
- FILES:=$(LINUX_DIR)/drivers/net/ps3_gelic.ko
- AUTOLOAD:=$(call AutoLoad,50,ps3_gelic)
-endef
-
-define KernelPackage/ps3lan/description
- Kernel module for PS3 Networking. Includes Gb Ethernet and WLAN
-endef
-
-$(eval $(call KernelPackage,ps3lan))
-
-
-define KernelPackage/ps3vram
- SUBMENU:=$(BLOCK_MENU)
- TITLE:=PS3 Video RAM Storage Driver
- DEPENDS:=@TARGET_ps3
- KCONFIG:=CONFIG_PS3_VRAM
- FILES:=$(LINUX_DIR)/drivers/block/ps3vram.ko
- AUTOLOAD:=$(call AutoLoad,01,ps3vram)
-endef
-
-define KernelPackage/ps3vram/description
- Kernel support for PS3 Video RAM Storage
-endef
-
-$(eval $(call KernelPackage,ps3vram))
-
-
-define KernelPackage/sound-ps3
- SUBMENU:=$(SOUND_MENU)
- TITLE:=PS3 Audio
- DEPENDS:=@TARGET_ps3
- KCONFIG:=CONFIG_SND_PS3 \
- CONFIG_SND_PPC=y \
- CONFIG_SND_PS3_DEFAULT_START_DELAY=2000
- FILES:=$(LINUX_DIR)/sound/ppc/snd_ps3.ko
- AUTOLOAD:=$(call AutoLoad,35, snd_ps3)
- $(call AddDepends/sound)
-endef
-
-define KernelPackage/sound-ps3/description
- support for the integrated PS3 audio device
-endef
-
-$(eval $(call KernelPackage,sound-ps3))
+++ /dev/null
-Subject: net/ps3_gelic: Fix RX DMA restart
-
-Fix the condition where PS3 network RX hangs when no network
-TX is occuring by calling gelic_card_enable_rxdmac() during
-RX_DMA_CHAIN_END event processing.
-
-The gelic hardware automatically clears its RX_DMA_EN flag when
-it detects an RX_DMA_CHAIN_END event. In its processing of
-RX_DMA_CHAIN_END the gelic driver is required to set RX_DMA_EN
-(with a call to gelic_card_enable_rxdmac()) to restart RX DMA
-transfers. The existing gelic driver code does not set
-RX_DMA_EN directly in its processing of the RX_DMA_CHAIN_END
-event, but uses a flag variable card->rx_dma_restart_required
-to schedule the setting of RX_DMA_EN until next inside the
-interrupt handler.
-
-It seems this delayed setting of RX_DMA_EN causes the hang since
-the next RX interrupt after the RX_DMA_CHAIN_END event where
-RX_DMA_EN is scheduled to be set will not occur since RX_DMA_EN
-was not set. In the case were network TX is occuring, RX_DMA_EN
-is set in the next TX interrupt and RX processing continues.
-
-Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
----
- drivers/net/ps3_gelic_net.c | 21 ++++++++-------------
- drivers/net/ps3_gelic_net.h | 1 -
- 2 files changed, 8 insertions(+), 14 deletions(-)
-
---- a/drivers/net/ps3_gelic_net.c
-+++ b/drivers/net/ps3_gelic_net.c
-@@ -969,10 +969,6 @@ static int gelic_card_decode_one_descr(s
- int dmac_chain_ended;
-
- status = gelic_descr_get_status(descr);
-- /* is this descriptor terminated with next_descr == NULL? */
-- dmac_chain_ended =
-- be32_to_cpu(descr->dmac_cmd_status) &
-- GELIC_DESCR_RX_DMA_CHAIN_END;
-
- if (status == GELIC_DESCR_DMA_CARDOWNED)
- return 0;
-@@ -1035,6 +1031,11 @@ static int gelic_card_decode_one_descr(s
- /* ok, we've got a packet in descr */
- gelic_net_pass_skb_up(descr, card, netdev);
- refill:
-+
-+ /* is the current descriptor terminated with next_descr == NULL? */
-+ dmac_chain_ended =
-+ be32_to_cpu(descr->dmac_cmd_status) &
-+ GELIC_DESCR_RX_DMA_CHAIN_END;
- /*
- * So that always DMAC can see the end
- * of the descriptor chain to avoid
-@@ -1063,10 +1064,9 @@ refill:
- * If dmac chain was met, DMAC stopped.
- * thus re-enable it
- */
-- if (dmac_chain_ended) {
-- card->rx_dma_restart_required = 1;
-- dev_dbg(ctodev(card), "reenable rx dma scheduled\n");
-- }
-+
-+ if (dmac_chain_ended)
-+ gelic_card_enable_rxdmac(card);
-
- return 1;
- }
-@@ -1132,11 +1132,6 @@ static irqreturn_t gelic_card_interrupt(
-
- status &= card->irq_mask;
-
-- if (card->rx_dma_restart_required) {
-- card->rx_dma_restart_required = 0;
-- gelic_card_enable_rxdmac(card);
-- }
--
- if (status & GELIC_CARD_RXINT) {
- gelic_card_rx_irq_off(card);
- napi_schedule(&card->napi);
---- a/drivers/net/ps3_gelic_net.h
-+++ b/drivers/net/ps3_gelic_net.h
-@@ -284,7 +284,6 @@ struct gelic_card {
-
- struct gelic_descr_chain tx_chain;
- struct gelic_descr_chain rx_chain;
-- int rx_dma_restart_required;
- int rx_csum;
- /*
- * tx_lock guards tx descriptor list and
+++ /dev/null
-#!/bin/sh
-# Copyright (C) 2008 OpenWrt.org
-
-bl_option=/sbin/ps3-bl-option
-
-if [ ! -f $bl_option ] ||
- [ ! `$bl_option --get-telnet-enabled` ] ||
- [ `$bl_option --get-telnet-enabled` = "0" ]; then
- echo \
-"
- === IMPORTANT ==========================
- Telnet login is disabled for security
- reasons. Enabling telnet login on the
- host will allow any user connected to
- the same network to login to the host.
-
- You can enable telnet login with the
- following command in the host console:
-
- # $bl_option -T 1
-
- You can disable telnet login with the
- following command in the host console:
-
- # $bl_option -T 0
- ----------------------------------------
-"
- exit 0
-fi
-
-grep '^root:[^!]' /etc/passwd >&- 2>&-
-[ "$?" = "0" -a -z "$FAILSAFE" ] &&
-{
- echo "Login failed."
- exit 0
-} || {
-cat << EOF
- === IMPORTANT ============================
- Use 'passwd' to set your login password
- this will disable telnet and enable SSH
- ------------------------------------------
-EOF
-}
-
-exec /bin/ash --login
+++ /dev/null
- _____ _____ _____
- | _ || ___||___ |
- | __||___ ||___ |
- |__| |_____||_____|
- L I N U X
-
+++ /dev/null
-# Copyright (C) 2006-2012 OpenWrt.org
-
-config interface loopback
- option ifname lo
- option proto static
- option ipaddr 127.0.0.1
- option netmask 255.0.0.0
-
-config interface lan
- option ifname eth0
- option proto dhcp
+++ /dev/null
-config system
- option hostname ps3-linux
- option log_file /var/log/messages
+++ /dev/null
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2006 OpenWrt.org
-
-START=10
-
-system_config() {
- local cfg="$1"
- local hostname
-
- config_get hostname "$cfg" hostname
- echo "${hostname:-OpenWrt}" > /proc/sys/kernel/hostname
-
- config_get conloglevel "$cfg" conloglevel
- [ -n "$conloglevel" ] && dmesg -n "$conloglevel"
-
- config_get timezone "$cfg" timezone
- [ -z "$timezone" ] && timezone=UTC
- echo "$timezone" > /tmp/TZ
-
- config_get log_ip "$cfg" log_ip
- config_get log_size "$cfg" log_size
- config_get log_port "$cfg" log_port
- config_get log_file "$cfg" log_file
-
- [ -z $log_file -a -z "$log_size" ] && log_size=16
- [ -x /sbin/syslogd ] && syslogd ${log_size:+-C $log_size} \
- ${log_file:+-O $log_file} ${log_ip:+-L -R $log_ip}
- [ -x /sbin/klogd ] && klogd
-}
-
-apply_uci_config() {(
- include /lib/config
- uci_apply_defaults
-)}
-
-start() {
- [ -f /proc/mounts ] || /sbin/mount_root
- [ -f /proc/jffs2_bbc ] && echo "S" > /proc/jffs2_bbc
- [ -f /proc/net/vlan/config ] && vconfig set_name_type DEV_PLUS_VID_NO_PAD
-
- apply_uci_config
- config_load system
- config_foreach system_config system
-
- mkdir -p /var/run
- mkdir -p /var/log
- mkdir -p /var/lock
- mkdir -p /var/state
- mkdir -p /tmp/.uci
- chown 0700 /tmp/.uci
- touch /var/log/wtmp
- touch /var/log/lastlog
- touch /tmp/resolv.conf.auto
- ln -sf /tmp/resolv.conf.auto /tmp/resolv.conf
- [ "$FAILSAFE" = "true" ] && touch /tmp/.failsafe
-
- killall -q hotplug2
- [ -x /sbin/hotplug2 ] && /sbin/hotplug2 --override --persistent \
- --max-children 1 --no-coldplug &
-
- # the coldplugging of network interfaces needs to happen later, so we do it manually here
- for iface in $(awk -F: '/:/ {print $1}' /proc/net/dev); do
- /usr/bin/env -i ACTION=add INTERFACE="$iface" /sbin/hotplug-call net
- done
-
- # create /dev/root if it doesn't exist
- [ -e /dev/root ] || {
- rootdev=$(awk 'BEGIN { RS=" "; FS="="; } $1 == "root" { print $2 }' < /proc/cmdline)
- [ -n "$rootdev" ] && ln -s "$rootdev" /dev/root
- }
-
- load_modules /etc/modules.d/*
-}
+++ /dev/null
-::sysinit:/etc/init.d/rcS S boot
-::shutdown:/etc/init.d/rcS K stop
-::ctrlaltdel:/sbin/reboot
-::restart:/sbin/init
-tty1::respawn:/sbin/initrun
-tty2::askfirst:/bin/ash --login
-tty3::askfirst:/bin/ash --login
+++ /dev/null
-kernel.panic=3
-net.ipv4.conf.default.arp_ignore=1
-net.ipv4.conf.all.arp_ignore=1
-net.ipv4.ip_forward=1
-net.ipv4.icmp_echo_ignore_broadcasts=1
-net.ipv4.icmp_ignore_bogus_error_responses=1
-net.ipv4.tcp_ecn=1
-net.ipv4.tcp_fin_timeout=30
-net.ipv4.tcp_keepalive_time=120
-net.ipv4.tcp_timestamps=0
-net.core.netdev_max_backlog=30
+++ /dev/null
-#!/bin/sh
-# Run petitboot at first startup, otherwise run a login.
-
-sbindir=/usr/sbin
-localstatedir=/var/petitboot
-
-petitboot=$sbindir/petitboot
-run_once=$localstatedir/.run-once
-
-if [ ! -f $run_once -a -x $petitboot ]; then
- # quiet console
- echo 3 > /proc/sys/kernel/printk
- mkdir -p $localstatedir
- touch $run_once
- exec $petitboot --timeout
-fi
-
-exec /bin/ash --login
+++ /dev/null
-#!/bin/sh
-#
-# Copyright (C) 2008 Sony Computer Entertainment Inc.
-# Copyright 2008 Sony Corp.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-
-usage() {
- echo -n "
-SYNOPSIS
- ps3-bl-option [OPTION]
-DESCRIPTION
- Get and set PS3 bootloader options in flash.
-OPTIONS
- -m, --get-video-mode
- Get the bootloader video mode.
- -M, --set-video-mode value
- Set the bootloader video mode.
- -o, --get-bootloader-timeout
- Get the bootloader timeout in seconds.
- -O, --set-bootloader-timeout value
- Set the bootloader timeout in seconds.
- -p, --get-bootloader-default
- Get the default bootloader menu item.
- -P, --set-bootloader-default value
- Set the default bootloader menu item.
- -t, --get-telnet-enabled
- Get the telnet enabled flag.
- -T, --set-telnet-enabled value
- Set the telnet enabled flag.
- -h, --help
- Print a help message.
-SEE ALSO
- ps3-flash-util(8)
-"
-}
-
-bad_arg() {
- echo "ERROR: bad arg" >&2;
- usage
- exit 1
-}
-
-if [ "$#" -eq 0 ] ; then
- bad_arg
-fi
-
-get_flag() {
- flags=`ps3-flash-util --db-print $1 $2`
- echo $(( ${flags:-0} & $3 ))
-}
-
-set_flag() {
- flags=`ps3-flash-util --db-print $1 $2`
-
- if [ $4 -eq 0 ]; then
- ps3-flash-util --db-write-half $1 $2 $(( ${flags:-0} & ~$3 ))
- else
- ps3-flash-util --db-write-half $1 $2 $(( ${flags:-0} | $3 ))
- fi
-}
-
-# owners
-bootloader="3"
-
-# keys
-item="1"
-video="2"
-flags="3"
-timeout="4"
-
-# flags
-telnet="1"
-
-case "$1" in
- -m | --get-video-mode)
- ps3-flash-util --db-print ${bootloader} ${video}
- ;;
- -M | --set-video-mode)
- ps3-flash-util --db-write-half ${bootloader} ${video} $2
- ;;
- -o | --get-bootloader-timeout)
- ps3-flash-util --db-print ${bootloader} ${timeout}
- ;;
- -O | --set-bootloader-timeout)
- ps3-flash-util --db-write-half ${bootloader} ${timeout} $2
- ;;
- -p | --get-bootloader-default)
- ps3-flash-util --db-print ${bootloader} ${item}
- ;;
- -P | --set-bootloader-default)
- ps3-flash-util --db-write-word ${bootloader} ${item} $2
- ;;
- -t | --get-telnet-enabled)
- get_flag ${bootloader} ${flags} ${telnet}
- ;;
- -T | --set-telnet-enabled)
- set_flag ${bootloader} ${flags} ${telnet} $2
- ;;
- -h | --help)
- usage
- exit 0
- ;;
- *)
- bad_arg
- ;;
-esac
+++ /dev/null
-# Configuration overrides
-
-CONFIG_TARGET_ps3=y
-
-CONFIG_BUSYBOX_CONFIG_GETTY=y
-CONFIG_BUSYBOX_CONFIG_FDISK=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE=y
-# CONFIG_BUSYBOX_CONFIG_BRCTL is not set
-# CONFIG_BUSYBOX_CONFIG_HTTPD is not set
-CONFIG_BUSYBOX_CONFIG_TFTP=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_GET=y
-
-# CONFIG_PACKAGE_udevtrigger is not set
-CONFIG_UDEV_ENABLE_DEBUG=y
-
-CONFIG_PETITBOOT_DEBUG=y
-CONFIG_PETITBOOT_PS3=y
-# CONFIG_PETITBOOT_AUTORUN_GUI is not set
-CONFIG_PETITBOOT_AUTORUN_CUI=y
+++ /dev/null
-#
-# Copyright (C) 2009 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/Default
- NAME:=Default PS3 Petitboot profile
- PACKAGES:=-dnsmasq -iptables -opkg -ppp -ppp-mod-pppoe -kmod-ipt-nathelper \
- -firewall -mtd -hotplug2 -swconfig \
- kexec-tools ps3-utils petitboot
-endef
-
-define Profile/Default/Description
- Default PS3 Petitboot profile
-endef
-$(eval $(call Profile,Default))
-
+++ /dev/null
-BOARDNAME:=Petitboot
-FEATURES+=fpu ramdisk
-
-define Target/Description
- Build Petitboot bootloader
-endef
projects / openwrt / staging / adrian.git / commitdiff