Add support for high-boot on TQM5200 and TQM5200S boards.

Hint: the CPLD on the TQM5200 must be programmed with a software
version supporting the high boot option! The new TQM5200S is
already supporting this option. On the TQM5200 this option will be
supported in configurations with MPC5200 rev B processors.

To actually "high boot", set jumper X30 on the STK52xx.

Patch by Martin Krause, 12 Jul 2006

diff --git a/CHANGELOG b/CHANGELOG
index d3d6c8bfd1ad539b0c914abdfdc8737295258488..291204b72f636df70442ee239b1efcd28e9129fc 100644 (file)
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,11 +2,20 @@
 Changes since U-Boot 1.1.4:
 ======================================================================
 
+* Add support for high-boot on TQM5200 and TQM5200S boards.
+  Hint: the CPLD on the TQM5200 must be programmed with a software
+  version supporting the high boot option! The new TQM5200S is
+  already supporting this option. On the TQM5200 this option will be
+  supported in configurations with MPC5200 rev B processors.
+  To actually "high boot", set jumper X30 on the STK52xx.
+  Patch by Martin Krause, 12 Jul 2006
+
 * Add support for new TQM5200 revisions
   - Support for TQM5200S (short version without graphic controller)
   - Support for modules with 'N' type S29GL128N Spansion flashes
     (requires changes to flash layout)
   - Support for MPC5200B cpu (mostly support for second SDRAM bank)
+  Patch by Martin Krause, 07 Jul 2006
 
 * Fix support for PS/2 keyboard on TQM85xx boards
   The PS/2 keyobard driver for the TQM85xx modules only supports the

diff --git a/Makefile b/Makefile
index e39af35f773318edb6ebd8b6bfdb63cdf3355b9d..4188ff638ca8938dac9d87587db3f8885c1a68c8 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -407,6 +407,7 @@ Total5200_Rev2_lowboot_config:      unconfig
 TQM5200_config \
 TQM5200_STK100_config \
 TQM5200_B_config \
+TQM5200_B_HIGHBOOT_config \
 MiniFAP_config:        unconfig
        @ >include/config.h
        @[ -z "$(findstring MiniFAP,$@)" ] || \
@@ -421,6 +422,9 @@ MiniFAP_config:     unconfig
                { echo "#define CONFIG_TQM5200_B"       >>include/config.h ; \
                  echo "... with MPC5200B processor" ; \
                }
+       @[ -z "$(findstring HIGHBOOT,$@)" ] || \
+               { echo "TEXT_BASE = 0xFFF00000" >board/tqm5200/config.tmp ; \
+               }
        @echo "#define CONFIG_CS_AUTOCONF">>include/config.h ;
        @echo "... with automatic CS configuration" ;
        @./mkconfig -a TQM5200 ppc mpc5xxx tqm5200

diff --git a/board/tqm5200/config.mk b/board/tqm5200/config.mk
index 585a99a8c711ce3a8706df94c7119d2259ca0f75..84ddee80d96f9c9e48af93b18783cbfb6e7a2650 100644 (file)
--- a/board/tqm5200/config.mk
+++ b/board/tqm5200/config.mk
@@ -28,12 +28,17 @@
 #
 #      0xFC000000   boot low (standard configuration with room for max 64 MByte
 #                   Flash ROM)
+#      0xFFF00000   boot high (for a backup copy of U-Boot)
 #      0x00100000   boot from RAM (for testing only)
 #
 
+sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
+
 ifndef TEXT_BASE
 ## Standard: boot low
 TEXT_BASE = 0xFC000000
+## For a backup copy of U-Boot at the end of flash: boot high
+# TEXT_BASE = 0xFFF00000
 ## For testing: boot from RAM
 # TEXT_BASE = 0x00100000
 endif

diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index 032177e3068a199737f92b91a71c009e69b6d341..0ef0b9155e2d2e694b8e636c723d42eaf2bb4a5b 100644 (file)
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -308,7 +308,7 @@
 /*
  * Flash configuration
  */
-#define CFG_FLASH_BASE         TEXT_BASE /* 0xFC000000 */
+#define CFG_FLASH_BASE         0xFC000000
 
 /* use CFI flash driver */
 #define CFG_FLASH_CFI          1       /* Flash is CFI conformant */
@@ -319,15 +319,11 @@
 #define CFG_MAX_FLASH_SECT     512     /* max num of sects on one chip */
 #define CFG_FLASH_USE_BUFFER_WRITE     1
 
-#if !defined(CFG_LOWBOOT)
-#define CFG_ENV_ADDR           (CFG_FLASH_BASE + 0x00760000 + 0x00800000)
-#else  /* CFG_LOWBOOT */
 #if defined(CONFIG_TQM5200_B)
 #define CFG_ENV_ADDR           (CFG_FLASH_BASE + 0x00080000)
 #else
 #define CFG_ENV_ADDR           (CFG_FLASH_BASE + 0x00060000)
 #endif /* CONFIG_TQM5200_B */
-#endif /* CFG_LOWBOOT */
 #define CFG_MAX_FLASH_BANKS    1       /* max num of flash banks
                                           (= chip selects) */