mediatek: filogic: upstream LEDs control on 2.5G ports on EX5601

This commit switches the control of the leds connected to the Maxlinear
GPY211C PHY to an upstream solution. The behaviour of LED1 is the same
as before. The behaviour of 2.5G-WAN LED has been changed. It is only
active when a 2.5G link is detected, which matches the stock software.
Additionally, the name of the WAN led has been changed to INTERNET.

Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://github.com/openwrt/openwrt/pull/17952
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

diff --git a/target/linux/mediatek/dts/mt7986a-zyxel-ex5601-t0-common.dtsi b/target/linux/mediatek/dts/mt7986a-zyxel-ex5601-t0-common.dtsi
index 02fec97f95ff007bb2dd01fbb9df206c868977f8..1a90417f19b7a83e2864585d3d0651c3e12e2352 100644 (file)
--- a/target/linux/mediatek/dts/mt7986a-zyxel-ex5601-t0-common.dtsi
+++ b/target/linux/mediatek/dts/mt7986a-zyxel-ex5601-t0-common.dtsi
@@ -214,13 +214,33 @@
                phy5: phy@5 {
                        compatible = "ethernet-phy-ieee802.3-c45";
                        reg = <5>;
-                       mxl,led-config = <0x03f0 0x0 0x0 0x0>;
+
+                       leds {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+
+                               led@0 {
+                                       reg = <0>;
+                                       color = <LED_COLOR_ID_GREEN>;
+                                       function = LED_FUNCTION_LAN;
+                               };
+                       };
                };
 
                phy6: phy@6 {
                        compatible = "ethernet-phy-ieee802.3-c45";
                        reg = <6>;
-                       mxl,led-config = <0x00f0 0x0 0x0 0x0>;
+
+                       leds {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+
+                               led@0 {
+                                       reg = <0>;
+                                       color = <LED_COLOR_ID_GREEN>;
+                                       function = LED_FUNCTION_WAN;
+                               };
+                       };
                };
 
                switch@1f {

diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
index 8b2c554fb3877d2776a5b9c61b8dd8cd1df5ee5e..4e1d10a4dcc196ceffe98ef324a1b5f930cc0f31 100644 (file)
--- a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
+++ b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
@@ -143,8 +143,10 @@ zbtlink,zbt-z8103ax)
        ;;
 zyxel,ex5601-t0-stock|\
 zyxel,ex5601-t0-ubootmod)
+       ucidef_set_led_netdev "lan1" "LAN1" "mdio-bus:05:green:lan" "lan1" "link tx rx"
+       ucidef_set_led_netdev "wan" "2.5G-WAN" "mdio-bus:06:green:wan" "eth1" "link_2500"
        ucidef_set_led_netdev "lan" "LAN" "green:lan" "eth0" "link tx rx"
-       ucidef_set_led_netdev "wan" "WAN" "green:inet" "eth1" "link tx rx"
+       ucidef_set_led_netdev "internet" "INTERNET" "green:inet" "eth1" "link tx rx"
        ucidef_set_led_netdev "wifi-24g" "WIFI-2.4G" "green:wifi24g" "phy0-ap0" "link tx rx"
        ucidef_set_led_netdev "wifi-5g" "WIFI-5G" "green:wifi5g" "phy1-ap0" "link tx rx"
        ;;