ltq-vdsl/ltq-vdsl-app: clean up configure args

The userspace application now uses the model=full option to match the
configuration of the kernel module. The source no longer contains SOAP
support, which was the primary reason to build only typical instead
of full before.

This makes several CLI commands, which were already supported in the
kernel module, available in the userspace application. For example, this
includes bbsg which allows to get information about VDSL2 bands.

Some previously applied build options were redundant. Disabling ADSL MIB
support is unnecessary, as it only applies to Danube. ADSL LED support
is no longer included in the source. ReTx counters are already included
with model type full.

This increases the size of the userspace application by approximately
15 kB (uncompressed). The kernel module does not change at all.

Signed-off-by: Jan Hoffmann <jan@3e8.eu>

diff --git a/package/kernel/lantiq/ltq-vdsl/Makefile b/package/kernel/lantiq/ltq-vdsl/Makefile
index 229e2b577c3ff6b367abef33178f1c297e7d0dde..f45895ba3344e5b33140d0837220398f1f1920ef 100644 (file)
--- a/package/kernel/lantiq/ltq-vdsl/Makefile
+++ b/package/kernel/lantiq/ltq-vdsl/Makefile
@@ -9,7 +9,7 @@ include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=ltq-vdsl-vr9
 PKG_VERSION:=4.17.18.6
-PKG_RELEASE:=4
+PKG_RELEASE:=5
 
 PKG_BASE_NAME:=drv_dsl_cpe_api
 PKG_SOURCE:=$(PKG_BASE_NAME)_vrx-$(PKG_VERSION).tar.gz
@@ -55,17 +55,14 @@ CONFIGURE_ARGS += --enable-kernel-include="$(LINUX_DIR)/include" \
        --enable-ifxos-include="-I$(STAGING_DIR)/usr/include/ifxos" \
        --enable-driver-include="-I$(STAGING_DIR)/usr/include/vdsl" \
        --enable-add-drv-cflags="-DMODULE -DINCLUDE_DSL_ATM_PTM_INTERFACE_SUPPORT" \
-       --enable-adsl-led=no \
-       --enable-adsl-mib=no \
-       --enable-dsl-ceoc=no \
        --enable-linux-26 \
        --enable-kernelbuild="$(LINUX_DIR)" \
-       --enable-debug-prints=no \
-       --enable-dsl-pm-retx-counters \
-       --enable-dsl-pm-retx-thresholds \
+       --enable-debug-prints=no
        ARCH=mips
 
-CONFIGURE_ARGS += --enable-model=full
+CONFIGURE_ARGS += \
+       --enable-model=full \
+       --enable-dsl-ceoc=no
 #CONFIGURE_ARGS += --enable-model=lite
 #CONFIGURE_ARGS += --enable-model=footprint
 #CONFIGURE_ARGS += --enable-model=typical

diff --git a/package/network/config/ltq-vdsl-app/Makefile b/package/network/config/ltq-vdsl-app/Makefile
index 0823a0e7e9ab4387140790b510125aea39a8f5d1..6ea103de8d9dc6e5dc8de6750483833e471e82dc 100644 (file)
--- a/package/network/config/ltq-vdsl-app/Makefile
+++ b/package/network/config/ltq-vdsl-app/Makefile
@@ -9,7 +9,7 @@ include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=ltq-vdsl-app
 PKG_VERSION:=4.17.18.6
-PKG_RELEASE:=8
+PKG_RELEASE:=9
 PKG_BASE_NAME:=dsl_cpe_control
 PKG_SOURCE:=$(PKG_BASE_NAME)_vrx-$(PKG_VERSION).tar.gz
 PKG_SOURCE_URL:=@OPENWRT
@@ -61,15 +61,12 @@ CONFIGURE_ARGS += \
        --disable-dti \
        --with-channels-per-line="1"
 
-#CONFIGURE_ARGS += --enable-model=full
+CONFIGURE_ARGS += \
+       --enable-model=full \
+       --enable-dsl-ceoc=no
 #CONFIGURE_ARGS += --enable-model=lite
 #CONFIGURE_ARGS += --enable-model=footprint
-CONFIGURE_ARGS += \
-       --enable-model=typical \
-       --enable-dsl-pm-showtime \
-       --disable-dsl-ceoc \
-       --enable-dsl-pm-retx-counters \
-       --enable-dsl-pm-retx-thresholds
+#CONFIGURE_ARGS += --enable-model=typical
 #CONFIGURE_ARGS += --enable-model=debug
 
 define Package/ltq-vdsl-app/install