arm64: dts: add MUSB node to Allwinner A64 dtsi

Allwinner A64 SoC has a MUSB controller like the one in A33, so add
a node for it, just use the compatible of A33 MUSB.

Host mode is tested to work properly on Pine64 and will be added into
the device tree of Pine64 in next patch.

Peripheral mode is also tested on Pine64, by changing dr_mode property
of usb_otg node and use a non-standard USB Type-A to Type-A cable.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 692611e86c984d700f408b639f9b8cef2d59e9a1..99b6bb1e141ce709f0099e925a0bc4f9c46e4a19 100644 (file)
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -122,6 +122,19 @@
                #size-cells = <1>;
                ranges;
 
+               usb_otg: usb@01c19000 {
+                       compatible = "allwinner,sun8i-a33-musb";
+                       reg = <0x01c19000 0x0400>;
+                       clocks = <&ccu CLK_BUS_OTG>;
+                       resets = <&ccu RST_BUS_OTG>;
+                       interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-names = "mc";
+                       phys = <&usbphy 0>;
+                       phy-names = "usb";
+                       extcon = <&usbphy 0>;
+                       status = "disabled";
+               };
+
                usbphy: phy@01c19400 {
                        compatible = "allwinner,sun50i-a64-usb-phy";
                        reg = <0x01c19400 0x14>,