mac80211: shorten the passive dwell time for sw scans

mac80211's software scan implementation uses a passive dwell time of
(HZ / 5) which means we stay 200ms on each passive channel. Compared
to iwlwifi's hw scan and the old ipw* drivers which use values around
120ms this is quite long.

Reducing the passive dwell time from 200ms to 125ms should save us
something around a second on cards capable of 11a and we should still be
able to catch beacons from most access points (assuming a ~100ms beacon
interval).

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index 8b2416c77a6e3fda2977b9db1e94c4e95780f4ed..569a464f60d8a711bee73f03d72e10fc84248e78 100644 (file)
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -26,7 +26,7 @@
 
 #define IEEE80211_PROBE_DELAY (HZ / 33)
 #define IEEE80211_CHANNEL_TIME (HZ / 33)
-#define IEEE80211_PASSIVE_CHANNEL_TIME (HZ / 5)
+#define IEEE80211_PASSIVE_CHANNEL_TIME (HZ / 8)
 
 struct ieee80211_bss *
 ieee80211_rx_bss_get(struct ieee80211_local *local, u8 *bssid, int freq,