clk: qcom: Put venus core0/1 gdscs to hw control mode

The venus video ip's internal core blocks are under the
control of the firmware and their powerdomains needs to be
'ON' only when used by the firmware. So putting it into
hw controlled mode lets this to happen, otherwise the firmware
hangs checking for this.

Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

diff --git a/drivers/clk/qcom/mmcc-msm8996.c b/drivers/clk/qcom/mmcc-msm8996.c
index f77206f549cc79f36409281201a8bcb4643c7eaa..9b97246287a7305f6b54ff9e4809fda1e748abc7 100644 (file)
--- a/drivers/clk/qcom/mmcc-msm8996.c
+++ b/drivers/clk/qcom/mmcc-msm8996.c
@@ -2945,6 +2945,7 @@ static struct gdsc venus_core0_gdsc = {
                .name = "venus_core0",
        },
        .pwrsts = PWRSTS_OFF_ON,
+       .flags = HW_CTRL,
 };
 
 static struct gdsc venus_core1_gdsc = {
@@ -2955,6 +2956,7 @@ static struct gdsc venus_core1_gdsc = {
                .name = "venus_core1",
        },
        .pwrsts = PWRSTS_OFF_ON,
+       .flags = HW_CTRL,
 };
 
 static struct gdsc camss_gdsc = {