dl2k: Reorder and cleanup initialization

Move HW init and stop into separate functions.
Request IRQ only after the HW has been reset (so interrupts are
disabled and no stale interrupts are pending).

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ethernet/dlink/dl2k.c b/drivers/net/ethernet/dlink/dl2k.c
index ec0eb7ff1146779ccfea16a1253258cc26581762..9e9baa0b87e51a6d45f6db6a254ecbf62e8d2457 100644 (file)
--- a/drivers/net/ethernet/dlink/dl2k.c
+++ b/drivers/net/ethernet/dlink/dl2k.c
@@ -252,19 +252,6 @@ rio_probe1 (struct pci_dev *pdev, const struct pci_device_id *ent)
        if (err)
                goto err_out_unmap_rx;
 
-       if (np->chip_id == CHIP_IP1000A &&
-           (np->pdev->revision == 0x40 || np->pdev->revision == 0x41)) {
-               /* PHY magic taken from ipg driver, undocumented registers */
-               mii_write(dev, np->phy_addr, 31, 0x0001);
-               mii_write(dev, np->phy_addr, 27, 0x01e0);
-               mii_write(dev, np->phy_addr, 31, 0x0002);
-               mii_write(dev, np->phy_addr, 27, 0xeb8e);
-               mii_write(dev, np->phy_addr, 31, 0x0000);
-               mii_write(dev, np->phy_addr, 30, 0x005e);
-               /* advertise 1000BASE-T half & full duplex, prefer MASTER */
-               mii_write(dev, np->phy_addr, MII_CTRL1000, 0x0700);
-       }
-
        /* Fiber device? */
        np->phy_media = (dr16(ASICCtrl) & PhyMedia) ? 1 : 0;
        np->link_status = 0;
@@ -274,13 +261,11 @@ rio_probe1 (struct pci_dev *pdev, const struct pci_device_id *ent)
                if (np->an_enable == 2) {
                        np->an_enable = 1;
                }
-               mii_set_media_pcs (dev);
        } else {
                /* Auto-Negotiation is mandatory for 1000BASE-T,
                   IEEE 802.3ab Annex 28D page 14 */
                if (np->speed == 1000)
                        np->an_enable = 1;
-               mii_set_media (dev);
        }
 
        err = register_netdev (dev);
@@ -531,25 +516,13 @@ static int alloc_list(struct net_device *dev)
        return 0;
 }
 
-static int
-rio_open (struct net_device *dev)
+static void rio_hw_init(struct net_device *dev)
 {
        struct netdev_private *np = netdev_priv(dev);
        void __iomem *ioaddr = np->ioaddr;
-       const int irq = np->pdev->irq;
        int i;
        u16 macctrl;
 
-       i = alloc_list(dev);
-       if (i)
-               return i;
-
-       i = request_irq(irq, rio_interrupt, IRQF_SHARED, dev->name, dev);
-       if (i) {
-               free_list(dev);
-               return i;
-       }
-
        /* Reset all logic functions */
        dw16(ASICCtrl + 2,
             GlobalReset | DMAReset | FIFOReset | NetworkReset | HostReset);
@@ -560,6 +533,24 @@ rio_open (struct net_device *dev)
        /* DebugCtrl bit 4, 5, 9 must set */
        dw32(DebugCtrl, dr32(DebugCtrl) | 0x0230);
 
+       if (np->chip_id == CHIP_IP1000A &&
+           (np->pdev->revision == 0x40 || np->pdev->revision == 0x41)) {
+               /* PHY magic taken from ipg driver, undocumented registers */
+               mii_write(dev, np->phy_addr, 31, 0x0001);
+               mii_write(dev, np->phy_addr, 27, 0x01e0);
+               mii_write(dev, np->phy_addr, 31, 0x0002);
+               mii_write(dev, np->phy_addr, 27, 0xeb8e);
+               mii_write(dev, np->phy_addr, 31, 0x0000);
+               mii_write(dev, np->phy_addr, 30, 0x005e);
+               /* advertise 1000BASE-T half & full duplex, prefer MASTER */
+               mii_write(dev, np->phy_addr, MII_CTRL1000, 0x0700);
+       }
+
+       if (np->phy_media)
+               mii_set_media_pcs(dev);
+       else
+               mii_set_media(dev);
+
        /* Jumbo frame */
        if (np->jumbo != 0)
                dw16(MaxFrameSize, MAX_JUMBO+14);
@@ -602,10 +593,6 @@ rio_open (struct net_device *dev)
                dw32(MACCtrl, dr32(MACCtrl) | AutoVLANuntagging);
        }
 
-       setup_timer(&np->timer, rio_timer, (unsigned long)dev);
-       np->timer.expires = jiffies + 1*HZ;
-       add_timer (&np->timer);
-
        /* Start Tx/Rx */
        dw32(MACCtrl, dr32(MACCtrl) | StatsEnable | RxEnable | TxEnable);
 
@@ -615,6 +602,42 @@ rio_open (struct net_device *dev)
        macctrl |= (np->tx_flow) ? TxFlowControlEnable : 0;
        macctrl |= (np->rx_flow) ? RxFlowControlEnable : 0;
        dw16(MACCtrl, macctrl);
+}
+
+static void rio_hw_stop(struct net_device *dev)
+{
+       struct netdev_private *np = netdev_priv(dev);
+       void __iomem *ioaddr = np->ioaddr;
+
+       /* Disable interrupts */
+       dw16(IntEnable, 0);
+
+       /* Stop Tx and Rx logics */
+       dw32(MACCtrl, TxDisable | RxDisable | StatsDisable);
+}
+
+static int rio_open(struct net_device *dev)
+{
+       struct netdev_private *np = netdev_priv(dev);
+       const int irq = np->pdev->irq;
+       int i;
+
+       i = alloc_list(dev);
+       if (i)
+               return i;
+
+       rio_hw_init(dev);
+
+       i = request_irq(irq, rio_interrupt, IRQF_SHARED, dev->name, dev);
+       if (i) {
+               rio_hw_stop(dev);
+               free_list(dev);
+               return i;
+       }
+
+       setup_timer(&np->timer, rio_timer, (unsigned long)dev);
+       np->timer.expires = jiffies + 1 * HZ;
+       add_timer(&np->timer);
 
        netif_start_queue (dev);
 
@@ -1764,17 +1787,11 @@ static int
 rio_close (struct net_device *dev)
 {
        struct netdev_private *np = netdev_priv(dev);
-       void __iomem *ioaddr = np->ioaddr;
-
        struct pci_dev *pdev = np->pdev;
 
        netif_stop_queue (dev);
 
-       /* Disable interrupts */
-       dw16(IntEnable, 0);
-
-       /* Stop Tx and Rx logics */
-       dw32(MACCtrl, TxDisable | RxDisable | StatsDisable);
+       rio_hw_stop(dev);
 
        free_irq(pdev->irq, dev);
        del_timer_sync (&np->timer);