dmaengine: omap-dma: move clnk_ctrl setting to preparation functions

Move the clnk_ctrl setup to the preparation functions, saving its
value in the omap_desc.  This only needs to be set once per descriptor,
not for each segment, so set it in omap_dma_start_desc() rather than
omap_dma_start().

Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/drivers/dma/omap-dma.c b/drivers/dma/omap-dma.c
index 06727a78e8832b3b8c368324c1e4e7fb73466bab..49609275b2e7743e8fdc2c1c474fb2e2afdc3d95 100644 (file)
--- a/drivers/dma/omap-dma.c
+++ b/drivers/dma/omap-dma.c
@@ -59,6 +59,7 @@ struct omap_desc {
        int16_t fi;             /* for OMAP_DMA_SYNC_PACKET */
        uint8_t es;             /* CSDP_DATA_TYPE_xxx */
        uint32_t ccr;           /* CCR value */
+       uint16_t clnk_ctrl;     /* CLNK_CTRL value */
        uint16_t cicr;          /* CICR value */
        uint32_t csdp;          /* CSDP value */
 
@@ -187,18 +188,6 @@ static void omap_dma_start(struct omap_chan *c, struct omap_desc *d)
        else
                c->plat->dma_write(0, CDAC, c->dma_ch);
 
-       if (!__dma_omap15xx(od->plat->dma_attr) && c->cyclic) {
-               val = c->plat->dma_read(CLNK_CTRL, c->dma_ch);
-
-               if (dma_omap1())
-                       val &= ~(1 << 14);
-
-               val |= c->dma_ch | CLNK_CTRL_ENABLE_LNK;
-
-               c->plat->dma_write(val, CLNK_CTRL, c->dma_ch);
-       } else if (od->plat->errata & DMA_ERRATA_PARALLEL_CHANNELS)
-               c->plat->dma_write(c->dma_ch, CLNK_CTRL, c->dma_ch);
-
        omap_dma_clear_csr(c);
 
        /* Enable interrupts */
@@ -330,6 +319,7 @@ static void omap_dma_start_desc(struct omap_chan *c)
        c->plat->dma_write(0, cxei, c->dma_ch);
        c->plat->dma_write(d->fi, cxfi, c->dma_ch);
        c->plat->dma_write(d->csdp, CSDP, c->dma_ch);
+       c->plat->dma_write(d->clnk_ctrl, CLNK_CTRL, c->dma_ch);
 
        omap_dma_start_sg(c, d, 0);
 }
@@ -645,6 +635,8 @@ static struct dma_async_tx_descriptor *omap_dma_prep_slave_sg(
        }
        if (od->plat->errata & DMA_ERRATA_IFRAME_BUFFERING)
                d->ccr |= CCR_BUFFERING_DISABLE;
+       if (od->plat->errata & DMA_ERRATA_PARALLEL_CHANNELS)
+               d->clnk_ctrl = c->dma_ch;
 
        /*
         * Build our scatterlist entries: each contains the address,
@@ -725,8 +717,6 @@ static struct dma_async_tx_descriptor *omap_dma_prep_dma_cyclic(
        d->sglen = 1;
 
        d->ccr = 0;
-       if (__dma_omap15xx(od->plat->dma_attr))
-               d->ccr = CCR_AUTO_INIT | CCR_REPEAT;
        if (dir == DMA_DEV_TO_MEM)
                d->ccr |= CCR_DST_AMODE_POSTINC | CCR_SRC_AMODE_CONSTANT;
        else
@@ -772,6 +762,11 @@ static struct dma_async_tx_descriptor *omap_dma_prep_dma_cyclic(
        if (od->plat->errata & DMA_ERRATA_IFRAME_BUFFERING)
                d->ccr |= CCR_BUFFERING_DISABLE;
 
+       if (__dma_omap15xx(od->plat->dma_attr))
+               d->ccr |= CCR_AUTO_INIT | CCR_REPEAT;
+       else
+               d->clnk_ctrl = c->dma_ch | CLNK_CTRL_ENABLE_LNK;
+
        c->cyclic = true;
 
        return vchan_tx_prep(&c->vc, &d->vd, flags);