--- /dev/null
+/*
+ * P1010/P1014 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,ifc", "simple-bus";
+ interrupts = <16 2 0 0 19 2 0 0>;
+};
+
+/* controller at 0x9000 */
+&pci0 {
+ compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xa000 */
+&pci1 {
+ compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,p1010-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,p1010-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,p1010-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+/include/ "pq3-espi-0.dtsi"
+ spi0: spi@7000 {
+ fsl,espi-num-chipselects = <1>;
+ };
+
+/include/ "pq3-gpio-0.dtsi"
+/include/ "pq3-sata2-0.dtsi"
+/include/ "pq3-sata2-1.dtsi"
+
+ can0: can@1c000 {
+ compatible = "fsl,p1010-flexcan";
+ reg = <0x1c000 0x1000>;
+ interrupts = <48 0x2 0 0>;
+ };
+
+ can1: can@1d000 {
+ compatible = "fsl,p1010-flexcan";
+ reg = <0x1d000 0x1000>;
+ interrupts = <61 0x2 0 0>;
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,p1010-l2-cache-controller",
+ "fsl,p1014-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2,256K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+/include/ "pq3-esdhc-0.dtsi"
+ sdhc@2e000 {
+ fsl,sdhci-auto-cmd12;
+ };
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+ enet0: ethernet@b0000 {
+ queue-group@b0000 {
+ fsl,rx-bit-map = <0xff>;
+ fsl,tx-bit-map = <0xff>;
+ };
+ };
+
+/include/ "pq3-etsec2-1.dtsi"
+ enet1: ethernet@b1000 {
+ queue-group@b1000 {
+ fsl,rx-bit-map = <0xff>;
+ fsl,tx-bit-map = <0xff>;
+ };
+ };
+
+/include/ "pq3-etsec2-2.dtsi"
+ enet2: ethernet@b2000 {
+ queue-group@b2000 {
+ fsl,rx-bit-map = <0xff>;
+ fsl,tx-bit-map = <0xff>;
+ };
+
+ };
+
+ global-utilities@e0000 {
+ compatible = "fsl,p1010-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
--- /dev/null
+/*
+ * P1010/P1014 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P1010";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ can0 = &can0;
+ can1 = &can1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,P1010@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
* option) any later version.
*/
-/include/ "p1010si.dtsi"
+/include/ "fsl/p1010si-pre.dtsi"
/ {
model = "fsl,P1010RDB";
compatible = "fsl,P1010RDB";
- aliases {
- serial0 = &serial0;
- serial1 = &serial1;
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- ethernet2 = &enet2;
- pci0 = &pci0;
- pci1 = &pci1;
- can0 = &can0;
- can1 = &can1;
- };
-
memory {
device_type = "memory";
};
- ifc@ffe1e000 {
+ board_ifc: ifc: ifc@ffe1e000 {
/* NOR, NAND Flashes and CPLD on board */
ranges = <0x0 0x0 0x0 0xee000000 0x02000000
0x1 0x0 0x0 0xff800000 0x00010000
0x3 0x0 0x0 0xffb00000 0x00000020>;
-
- nor@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x2000000>;
- bank-width = <2>;
- device-width = <1>;
-
- partition@40000 {
- /* 256KB for DTB Image */
- reg = <0x00040000 0x00040000>;
- label = "NOR DTB Image";
- };
-
- partition@80000 {
- /* 7 MB for Linux Kernel Image */
- reg = <0x00080000 0x00700000>;
- label = "NOR Linux Kernel Image";
- };
-
- partition@800000 {
- /* 20MB for JFFS2 based Root file System */
- reg = <0x00800000 0x01400000>;
- label = "NOR JFFS2 Root File System";
- };
-
- partition@1f00000 {
- /* This location must not be altered */
- /* 512KB for u-boot Bootloader Image */
- /* 512KB for u-boot Environment Variables */
- reg = <0x01f00000 0x00100000>;
- label = "NOR U-Boot Image";
- read-only;
- };
- };
-
- nand@1,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,ifc-nand";
- reg = <0x1 0x0 0x10000>;
-
- partition@0 {
- /* This location must not be altered */
- /* 1MB for u-boot Bootloader Image */
- reg = <0x0 0x00100000>;
- label = "NAND U-Boot Image";
- read-only;
- };
-
- partition@100000 {
- /* 1MB for DTB Image */
- reg = <0x00100000 0x00100000>;
- label = "NAND DTB Image";
- };
-
- partition@200000 {
- /* 4MB for Linux Kernel Image */
- reg = <0x00200000 0x00400000>;
- label = "NAND Linux Kernel Image";
- };
-
- partition@600000 {
- /* 4MB for Compressed Root file System Image */
- reg = <0x00600000 0x00400000>;
- label = "NAND Compressed RFS Image";
- };
-
- partition@a00000 {
- /* 15MB for JFFS2 based Root file System */
- reg = <0x00a00000 0x00f00000>;
- label = "NAND JFFS2 Root File System";
- };
-
- partition@1900000 {
- /* 7MB for User Area */
- reg = <0x01900000 0x00700000>;
- label = "NAND User area";
- };
- };
-
- cpld@3,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p1010rdb-cpld";
- reg = <0x3 0x0 0x0000020>;
- bank-width = <1>;
- device-width = <1>;
- };
+ reg = <0x0 0xffe1e000 0 0x2000>;
};
- soc@ffe00000 {
- spi@7000 {
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "spansion,s25sl12801";
- reg = <0>;
- spi-max-frequency = <50000000>;
-
- partition@0 {
- /* 1MB for u-boot Bootloader Image */
- /* 1MB for Environment */
- reg = <0x0 0x00100000>;
- label = "SPI Flash U-Boot Image";
- read-only;
- };
-
- partition@100000 {
- /* 512KB for DTB Image */
- reg = <0x00100000 0x00080000>;
- label = "SPI Flash DTB Image";
- };
-
- partition@180000 {
- /* 4MB for Linux Kernel Image */
- reg = <0x00180000 0x00400000>;
- label = "SPI Flash Linux Kernel Image";
- };
-
- partition@580000 {
- /* 4MB for Compressed RFS Image */
- reg = <0x00580000 0x00400000>;
- label = "SPI Flash Compressed RFSImage";
- };
-
- partition@980000 {
- /* 6.5MB for JFFS2 based RFS */
- reg = <0x00980000 0x00680000>;
- label = "SPI Flash JFFS2 RFS";
- };
- };
- };
-
- usb@22000 {
- phy_type = "utmi";
- };
-
- mdio@24000 {
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
- reg = <0x1>;
- };
-
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <2 1>;
- reg = <0x0>;
- };
-
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <2 1>;
- reg = <0x2>;
- };
- };
-
- enet0: ethernet@b0000 {
- phy-handle = <&phy0>;
- phy-connection-type = "rgmii-id";
- };
-
- enet1: ethernet@b1000 {
- phy-handle = <&phy1>;
- tbi-handle = <&tbi0>;
- phy-connection-type = "sgmii";
- };
-
- enet2: ethernet@b2000 {
- phy-handle = <&phy2>;
- tbi-handle = <&tbi1>;
- phy-connection-type = "sgmii";
- };
+ board_soc: soc: soc@ffe00000 {
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
};
pci0: pcie@ffe09000 {
+ reg = <0 0xffe09000 0 0x1000>;
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
-
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
};
pci1: pcie@ffe0a000 {
+ reg = <0 0xffe0a000 0 0x1000>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
};
};
};
+
+/include/ "p1010rdb.dtsi"
+/include/ "fsl/p1010si-post.dtsi"
--- /dev/null
+/*
+ * P1010 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_ifc {
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x2000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ partition@40000 {
+ /* 256KB for DTB Image */
+ reg = <0x00040000 0x00040000>;
+ label = "NOR DTB Image";
+ };
+
+ partition@80000 {
+ /* 7 MB for Linux Kernel Image */
+ reg = <0x00080000 0x00700000>;
+ label = "NOR Linux Kernel Image";
+ };
+
+ partition@800000 {
+ /* 20MB for JFFS2 based Root file System */
+ reg = <0x00800000 0x01400000>;
+ label = "NOR JFFS2 Root File System";
+ };
+
+ partition@1f00000 {
+ /* This location must not be altered */
+ /* 512KB for u-boot Bootloader Image */
+ /* 512KB for u-boot Environment Variables */
+ reg = <0x01f00000 0x00100000>;
+ label = "NOR U-Boot Image";
+ read-only;
+ };
+ };
+
+ nand@1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,ifc-nand";
+ reg = <0x1 0x0 0x10000>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 1MB for u-boot Bootloader Image */
+ reg = <0x0 0x00100000>;
+ label = "NAND U-Boot Image";
+ read-only;
+ };
+
+ partition@100000 {
+ /* 1MB for DTB Image */
+ reg = <0x00100000 0x00100000>;
+ label = "NAND DTB Image";
+ };
+
+ partition@200000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00200000 0x00400000>;
+ label = "NAND Linux Kernel Image";
+ };
+
+ partition@600000 {
+ /* 4MB for Compressed Root file System Image */
+ reg = <0x00600000 0x00400000>;
+ label = "NAND Compressed RFS Image";
+ };
+
+ partition@a00000 {
+ /* 15MB for JFFS2 based Root file System */
+ reg = <0x00a00000 0x00f00000>;
+ label = "NAND JFFS2 Root File System";
+ };
+
+ partition@1900000 {
+ /* 7MB for User Area */
+ reg = <0x01900000 0x00700000>;
+ label = "NAND User area";
+ };
+ };
+
+ cpld@3,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,p1010rdb-cpld";
+ reg = <0x3 0x0 0x0000020>;
+ bank-width = <1>;
+ device-width = <1>;
+ };
+};
+
+&board_soc {
+ spi@7000 {
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25sl12801";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partition@0 {
+ /* 1MB for u-boot Bootloader Image */
+ /* 1MB for Environment */
+ reg = <0x0 0x00100000>;
+ label = "SPI Flash U-Boot Image";
+ read-only;
+ };
+
+ partition@100000 {
+ /* 512KB for DTB Image */
+ reg = <0x00100000 0x00080000>;
+ label = "SPI Flash DTB Image";
+ };
+
+ partition@180000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00180000 0x00400000>;
+ label = "SPI Flash Linux Kernel Image";
+ };
+
+ partition@580000 {
+ /* 4MB for Compressed RFS Image */
+ reg = <0x00580000 0x00400000>;
+ label = "SPI Flash Compressed RFSImage";
+ };
+
+ partition@980000 {
+ /* 6.5MB for JFFS2 based RFS */
+ reg = <0x00980000 0x00680000>;
+ label = "SPI Flash JFFS2 RFS";
+ };
+ };
+ };
+
+ usb@22000 {
+ phy_type = "utmi";
+ dr_mode = "host";
+ };
+
+ mdio@24000 {
+ phy0: ethernet-phy@0 {
+ interrupts = <3 1 0 0>;
+ reg = <0x1>;
+ };
+
+ phy1: ethernet-phy@1 {
+ interrupts = <2 1 0 0>;
+ reg = <0x0>;
+ };
+
+ phy2: ethernet-phy@2 {
+ interrupts = <2 1 0 0>;
+ reg = <0x2>;
+ };
+ };
+
+ mdio@25000 {
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@26000 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet0: ethernet@b0000 {
+ phy-handle = <&phy0>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ enet1: ethernet@b1000 {
+ phy-handle = <&phy1>;
+ tbi-handle = <&tbi0>;
+ phy-connection-type = "sgmii";
+ };
+
+ enet2: ethernet@b2000 {
+ phy-handle = <&phy2>;
+ tbi-handle = <&tbi1>;
+ phy-connection-type = "sgmii";
+ };
+};
+++ /dev/null
-/*
- * P1010si Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-/ {
- compatible = "fsl,P1010";
- #address-cells = <2>;
- #size-cells = <2>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,P1010@0 {
- device_type = "cpu";
- reg = <0x0>;
- next-level-cache = <&L2>;
- };
- };
-
- ifc@ffe1e000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,ifc", "simple-bus";
- reg = <0x0 0xffe1e000 0 0x2000>;
- interrupts = <16 2 19 2>;
- interrupt-parent = <&mpic>;
- };
-
- soc@ffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "fsl,p1010-immr", "simple-bus";
- ranges = <0x0 0x0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,p1010-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <16 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,p1010-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- spi@7000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc8536-espi";
- reg = <0x7000 0x1000>;
- interrupts = <59 0x2>;
- interrupt-parent = <&mpic>;
- fsl,espi-num-chipselects = <1>;
- };
-
- gpio: gpio-controller@f000 {
- #gpio-cells = <2>;
- compatible = "fsl,mpc8572-gpio";
- reg = <0xf000 0x100>;
- interrupts = <47 0x2>;
- interrupt-parent = <&mpic>;
- gpio-controller;
- };
-
- sata@18000 {
- compatible = "fsl,pq-sata-v2";
- reg = <0x18000 0x1000>;
- cell-index = <1>;
- interrupts = <74 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- sata@19000 {
- compatible = "fsl,pq-sata-v2";
- reg = <0x19000 0x1000>;
- cell-index = <2>;
- interrupts = <41 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- can0: can@1c000 {
- compatible = "fsl,p1010-flexcan";
- reg = <0x1c000 0x1000>;
- interrupts = <48 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- can1: can@1d000 {
- compatible = "fsl,p1010-flexcan";
- reg = <0x1d000 0x1000>;
- interrupts = <61 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,p1010-l2-cache-controller",
- "fsl,p1014-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x40000>; // L2,256K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p1010-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- usb@22000 {
- compatible = "fsl-usb2-dr";
- reg = <0x22000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <28 0x2>;
- dr_mode = "host";
- };
-
- mdio@24000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-mdio";
- reg = <0x24000 0x1000 0xb0030 0x4>;
- };
-
- mdio@25000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-tbi";
- reg = <0x25000 0x1000 0xb1030 0x4>;
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@26000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-tbi";
- reg = <0x26000 0x1000 0xb1030 0x4>;
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- sdhci@2e000 {
- compatible = "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <72 0x8>;
- interrupt-parent = <&mpic>;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
- fsl,sdhci-auto-cmd12;
- };
-
- enet0: ethernet@b0000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
-
- queue-group@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb0000 0x1000>;
- fsl,rx-bit-map = <0xff>;
- fsl,tx-bit-map = <0xff>;
- interrupts = <29 2 30 2 34 2>;
- };
-
- };
-
- enet1: ethernet@b1000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
-
- queue-group@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb1000 0x1000>;
- fsl,rx-bit-map = <0xff>;
- fsl,tx-bit-map = <0xff>;
- interrupts = <35 2 36 2 40 2>;
- };
-
- };
-
- enet2: ethernet@b2000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
-
- queue-group@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb2000 0x1000>;
- fsl,rx-bit-map = <0xff>;
- fsl,tx-bit-map = <0xff>;
- interrupts = <31 2 32 2 33 2>;
- };
-
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi@41600 {
- compatible = "fsl,p1010-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,p1010-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
- };
-
- pci0: pcie@ffe09000 {
- compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0 0xffe09000 0 0x1000>;
- bus-range = <0 255>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- pci1: pcie@ffe0a000 {
- compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0 0xffe0a000 0 0x1000>;
- bus-range = <0 255>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-};
projects / openwrt / staging / blogic.git / commitdiff