development platform that supports the QorIQ LS1012A
Layerscape Architecture processor.
+config TARGET_LS1012AFRWY
+ bool "Support ls1012afrwy"
+ select ARCH_LS1012A
+ select ARM64
+ imply SCSI
+ imply SCSI_AHCI
+ help
+ Support for Freescale LS1012AFRWY platform.
+ The LS1012A FRWY board (FRWY) is a high-performance
+ development platform that supports the QorIQ LS1012A
+ Layerscape Architecture processor.
+
config TARGET_LS1012AFRDM
bool "Support ls1012afrdm"
select ARCH_LS1012A
!TARGET_LS1088ARDB && !TARGET_LS1088AQDS && \
!TARGET_LS1012ARDB && !TARGET_LS1012AFRDM && \
!TARGET_LS1012A2G5RDB && !TARGET_LS1012AQDS && \
+ !TARGET_LS1012AFRWY && \
!TARGET_LS1043ARDB && !TARGET_LS1043AQDS && \
!TARGET_LS1046ARDB && !TARGET_LS1046AQDS && \
!TARGET_LS2081ARDB && \
fsl-ls1012a-qds.dtb \
fsl-ls1012a-rdb.dtb \
fsl-ls1012a-2g5rdb.dtb \
- fsl-ls1012a-frdm.dtb
+ fsl-ls1012a-frdm.dtb \
+ fsl-ls1012a-frwy.dtb
dtb-$(CONFIG_TARGET_DRAGONBOARD410C) += dragonboard410c.dtb
dtb-$(CONFIG_TARGET_DRAGONBOARD820C) += dragonboard820c.dtb
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP ls1012a FRWY board device tree source
+ *
+ * Copyright 2018 NXP
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1012a.dtsi"
+
+/ {
+ model = "FRWY-LS1012A Board";
+
+ aliases {
+ spi0 = &qspi;
+ };
+
+ chosen {
+ stdout-path = &duart0;
+ };
+};
+
+&qspi {
+ bus-num = <0>;
+ status = "okay";
+
+ qflash0: w25q16dw@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-flash";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&duart0 {
+ status = "okay";
+};
config SYS_CONFIG_NAME
default "ls1012afrdm"
+config SYS_LS_PFE_FW_ADDR
+ hex "Flash address of PFE firmware"
+ default 0x40a00000
+
config SYS_LS_PPA_FW_ADDR
hex "PPA Firmware Addr"
default 0x40400000
+endif
if FSL_PFE
def_bool y
select PHYLIB
imply PHY_REALTEK
-
-config SYS_LS_PFE_FW_ADDR
- hex "Flash address of PFE firmware"
- default 0x40a00000
+ imply PHY_ATHEROS
config DDR_PFE_PHYS_BASEADDR
hex "PFE DDR physical base address"
endif
-source "board/freescale/common/Kconfig"
+if TARGET_LS1012AFRWY
+
+config SYS_BOARD
+ default "ls1012afrdm"
+
+config SYS_VENDOR
+ default "freescale"
+
+config SYS_SOC
+ default "fsl-layerscape"
+config SYS_CONFIG_NAME
+ default "ls1012afrwy"
+
+config SYS_LS_PFE_FW_ADDR
+ hex "Flash address of PFE firmware"
+ default 0x40020000
+
+config SYS_LS_PPA_FW_ADDR
+ hex "PPA Firmware Addr"
+ default 0x40060000
+
+endif
+
+if TARGET_LS1012AFRDM || TARGET_LS1012AFRWY
+source "board/freescale/common/Kconfig"
endif
F: board/freescale/ls1012afrdm/
F: include/configs/ls1012afrdm.h
F: configs/ls1012afrdm_qspi_defconfig
+
+LS1012AFRWY BOARD
+M: Bhaskar Upadhaya <bhaskar.upadhaya@nxp.com>
+S: Maintained
+F: board/freescale/ls1012afrwy/
+F: include/configs/ls1012afrwy.h
+F: configs/ls1012afrwy_qspi_defconfig
// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP
*/
#include <common.h>
#endif
#include <asm/arch/mmu.h>
#include <asm/arch/soc.h>
+#include <fsl_esdhc.h>
#include <hwconfig.h>
#include <environment.h>
#include <fsl_mmdc.h>
DECLARE_GLOBAL_DATA_PTR;
+static inline int get_board_version(void)
+{
+ struct ccsr_gpio *pgpio = (void *)(GPIO1_BASE_ADDR);
+ int val;
+
+ val = in_be32(&pgpio->gpdat);
+
+ return val;
+}
+
int checkboard(void)
{
+#ifdef CONFIG_TARGET_LS1012AFRDM
puts("Board: LS1012AFRDM ");
+#else
+ int rev;
+
+ rev = get_board_version();
+
+ puts("Board: FRWY-LS1012A ");
+
+ puts("Version");
+
+ switch (rev) {
+ case BOARD_REV_A:
+ puts(": RevA ");
+ break;
+ case BOARD_REV_B:
+ puts(": RevB ");
+ break;
+ default:
+ puts(": unknown");
+ break;
+ }
+#endif
+
+ return 0;
+}
+#ifdef CONFIG_TARGET_LS1012AFRWY
+int esdhc_status_fixup(void *blob, const char *compat)
+{
+ char esdhc0_path[] = "/soc/esdhc@1560000";
+ char esdhc1_path[] = "/soc/esdhc@1580000";
+
+ do_fixup_by_path(blob, esdhc0_path, "status", "okay",
+ sizeof("okay"), 1);
+
+ do_fixup_by_path(blob, esdhc1_path, "status", "disabled",
+ sizeof("disabled"), 1);
return 0;
}
+#endif
int dram_init(void)
{
- static const struct fsl_mmdc_info mparam = {
+#ifdef CONFIG_TARGET_LS1012AFRWY
+ int board_rev;
+#endif
+ struct fsl_mmdc_info mparam = {
0x04180000, /* mdctl */
0x00030035, /* mdpdc */
0x12554000, /* mdotc */
0xa1390003, /* mpzqhwctrl */
};
- mmdc_init(&mparam);
+#ifdef CONFIG_TARGET_LS1012AFRWY
+ board_rev = get_board_version();
+ if (board_rev & BOARD_REV_B) {
+ mparam.mdctl = 0x05180000;
+ gd->ram_size = SYS_SDRAM_SIZE_1024;
+ } else {
+ gd->ram_size = SYS_SDRAM_SIZE_512;
+ }
+#else
gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+#endif
+ mmdc_init(&mparam);
+
#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
/* This will break-before-make MMU for DDR */
update_early_mmu_table();
--- /dev/null
+CONFIG_ARM=y
+CONFIG_TARGET_LS1012AFRWY=y
+CONFIG_SYS_TEXT_BASE=0x40100000
+CONFIG_FSL_LS_PPA=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1012a-frwy"
+CONFIG_DISTRO_DEFAULTS=y
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
+CONFIG_QSPI_BOOT=y
+CONFIG_BOOTDELAY=10
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000"
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_CACHE=y
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+# CONFIG_BLK is not set
+CONFIG_DM_MMC=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_FSL_PFE=y
+CONFIG_DM_ETH=y
+CONFIG_E1000=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_NS16550=y
+CONFIG_DM_SPI=y
+CONFIG_FSL_DSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_STORAGE=y
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ */
+
+#ifndef __LS1012AFRWY_H__
+#define __LS1012AFRWY_H__
+
+#include "ls1012a_common.h"
+
+/* Board Rev*/
+#define BOARD_REV_A 0x0
+#define BOARD_REV_B 0x200
+
+/* DDR */
+#define CONFIG_DIMM_SLOTS_PER_CTLR 1
+#define CONFIG_CHIP_SELECTS_PER_CTRL 1
+#define CONFIG_NR_DRAM_BANKS 2
+#define SYS_SDRAM_SIZE_512 0x20000000
+#define SYS_SDRAM_SIZE_1024 0x40000000
+#define CONFIG_CHIP_SELECTS_PER_CTRL 1
+#define CONFIG_CMD_MEMINFO
+#define CONFIG_CMD_MEMTEST
+#define CONFIG_SYS_MEMTEST_START 0x80000000
+#define CONFIG_SYS_MEMTEST_END 0x9fffffff
+
+#ifndef CONFIG_SPL_BUILD
+#undef BOOT_TARGET_DEVICES
+#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 0) \
+ func(USB, usb, 0)
+#endif
+
+#undef CONFIG_ENV_OFFSET
+#define CONFIG_ENV_OFFSET 0x1D0000
+#undef FSL_QSPI_FLASH_SIZE
+#define FSL_QSPI_FLASH_SIZE SZ_16M
+#undef CONFIG_ENV_SECT_SIZE
+#define CONFIG_ENV_SECT_SIZE 0x10000 /*64 KB*/
+#undef CONFIG_ENV_SIZE
+#define CONFIG_ENV_SIZE 0x10000 /*64 KB*/
+
+/* MMC */
+#ifdef CONFIG_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
+#endif
+
+#define CONFIG_PCIE1 /* PCIE controller 1 */
+
+#define CONFIG_PCI_SCAN_SHOW
+
+#undef CONFIG_EXTRA_ENV_SETTINGS
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "verify=no\0" \
+ "fdt_high=0xffffffffffffffff\0" \
+ "initrd_high=0xffffffffffffffff\0" \
+ "fdt_addr=0x00f00000\0" \
+ "kernel_addr=0x01000000\0" \
+ "kernelheader_addr=0x1fc000\0" \
+ "scriptaddr=0x80000000\0" \
+ "scripthdraddr=0x80080000\0" \
+ "fdtheader_addr_r=0x80100000\0" \
+ "kernelheader_addr_r=0x80200000\0" \
+ "kernel_addr_r=0x81000000\0" \
+ "fdt_addr_r=0x90000000\0" \
+ "load_addr=0x96000000\0" \
+ "kernel_size=0x2800000\0" \
+ "kernelheader_size=0x40000\0" \
+ "console=ttyS0,115200\0" \
+ BOOTENV \
+ "boot_scripts=ls1012afrwy_boot.scr\0" \
+ "boot_script_hdr=hdr_ls1012afrwy_bs.out\0" \
+ "scan_dev_for_boot_part=" \
+ "part list ${devtype} ${devnum} devplist; " \
+ "env exists devplist || setenv devplist 1; " \
+ "for distro_bootpart in ${devplist}; do " \
+ "if fstype ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "bootfstype; then " \
+ "run scan_dev_for_boot; " \
+ "fi; " \
+ "done\0" \
+ "scan_dev_for_boot=" \
+ "echo Scanning ${devtype} " \
+ "${devnum}:${distro_bootpart}...; " \
+ "for prefix in ${boot_prefixes}; do " \
+ "run scan_dev_for_scripts; " \
+ "done;" \
+ "\0" \
+ "boot_a_script=" \
+ "load ${devtype} ${devnum}:${distro_bootpart} " \
+ "${scriptaddr} ${prefix}${script}; " \
+ "env exists secureboot && load ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "${scripthdraddr} ${prefix}${boot_script_hdr} " \
+ "&& esbc_validate ${scripthdraddr};" \
+ "source ${scriptaddr}\0" \
+ "installer=load mmc 0:2 $load_addr " \
+ "/flex_installer_arm64.itb; " \
+ "bootm $load_addr#$board\0" \
+ "qspi_bootcmd=echo Trying load from qspi..;" \
+ "sf probe && sf read $load_addr " \
+ "$kernel_addr $kernel_size; env exists secureboot " \
+ "&& sf read $kernelheader_addr_r $kernelheader_addr " \
+ "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
+ "bootm $load_addr#$board\0"
+
+#undef CONFIG_BOOTCOMMAND
+#define CONFIG_BOOTCOMMAND "pfe stop; run distro_bootcmd; run qspi_bootcmd; "\
+ "env exists secureboot && esbc_halt;"
+#define CONFIG_CMD_MEMINFO
+#define CONFIG_CMD_MEMTEST
+#define CONFIG_SYS_MEMTEST_START 0x80000000
+#define CONFIG_SYS_MEMTEST_END 0x9fffffff
+
+#include <asm/fsl_secure_boot.h>
+
+#endif /* __LS1012AFRWY_H__ */
projects / project / bcm63xx / u-boot.git / commitdiff