ARM: OMAP: WiLink platform data for the PandaBoard

The "uim" deamon requires sysfs entries that are filled in using
this platform data.

Signed-off-by: Mircea Gherzan <mgherzan@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 1b782ba534336f6f3d3236e10316733f0f1b2abc..1b2eb289b8b8d6a690c7346b817a3623d59fab5a 100644 (file)
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -28,6 +28,7 @@
 #include <linux/mfd/twl6040.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
+#include <linux/ti_wilink_st.h>
 #include <linux/wl12xx.h>
 #include <linux/platform_data/omap-abe-twl6040.h>
 
@@ -58,12 +59,21 @@
 #define HDMI_GPIO_HPD  63 /* Hotplug detect */
 
 /* wl127x BT, FM, GPS connectivity chip */
-static int wl1271_gpios[] = {46, -1, -1};
+static struct ti_st_plat_data wilink_platform_data = {
+       .nshutdown_gpio = 46,
+       .dev_name       = "/dev/ttyO1",
+       .flow_cntrl     = 1,
+       .baud_rate      = 3000000,
+       .chip_enable    = NULL,
+       .suspend        = NULL,
+       .resume         = NULL,
+};
+
 static struct platform_device wl1271_device = {
        .name   = "kim",
        .id     = -1,
        .dev    = {
-               .platform_data  = &wl1271_gpios,
+               .platform_data  = &wilink_platform_data,
        },
 };
 

diff --git a/include/linux/ti_wilink_st.h b/include/linux/ti_wilink_st.h
index 2ef4385da6bf7a70ed60a8a01b7fdb54201c1840..3ca0269dd0b587d4dfa4a157bcde969de57d6030 100644 (file)
--- a/include/linux/ti_wilink_st.h
+++ b/include/linux/ti_wilink_st.h
@@ -25,6 +25,8 @@
 #ifndef TI_WILINK_ST_H
 #define TI_WILINK_ST_H
 
+#include <linux/skbuff.h>
+
 /**
  * enum proto-type - The protocol on WiLink chips which share a
  *     common physical interface like UART.