Revert "serial: Delete dead code for CIR serial ports"

This reverts commit 1104321a7b3bb670dc614ffa7958c553e7b3b836.

The code is not dead at all and breaks winbond-cir.

Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a CIR port
lirc lirc0: lirc_dev: driver ir-lirc-codec (winbond-cir) registered at minor = 0
winbond-cir 00:03: Region 0x2f8-0x2ff already in use!
winbond-cir: probe of 00:03 failed with error -16

Signed-off-by: Sean Young <sean@mess.org>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index b5def356af63b70e3ebc2e23a48da0753e41b47e..1aab3010fbfae76e2c25cb60085f21051a1f24cf 100644 (file)
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -1043,13 +1043,24 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
                if (up->dl_write)
                        uart->dl_write = up->dl_write;
 
-               if (serial8250_isa_config != NULL)
-                       serial8250_isa_config(0, &uart->port,
-                                       &uart->capabilities);
+               if (uart->port.type != PORT_8250_CIR) {
+                       if (serial8250_isa_config != NULL)
+                               serial8250_isa_config(0, &uart->port,
+                                               &uart->capabilities);
+
+                       ret = uart_add_one_port(&serial8250_reg,
+                                               &uart->port);
+                       if (ret == 0)
+                               ret = uart->port.line;
+               } else {
+                       dev_info(uart->port.dev,
+                               "skipping CIR port at 0x%lx / 0x%llx, IRQ %d\n",
+                               uart->port.iobase,
+                               (unsigned long long)uart->port.mapbase,
+                               uart->port.irq);
 
-               ret = uart_add_one_port(&serial8250_reg, &uart->port);
-               if (ret == 0)
-                       ret = uart->port.line;
+                       ret = 0;
+               }
        }
        mutex_unlock(&serial_mutex);