ucidef_set_led_wlan "wlan" "WLAN" "alfa:blue:wlan" "phy0tpt"
ucidef_set_led_usbdev "usb" "USB" "alfa:blue:usb" "1-1"
;;
+lan-turtle)
+ ucidef_set_led_netdev "wan" "WAN" "$board:orange:system" "eth1"
+ ;;
mc-mac1200r)
ucidef_set_led_wlan "wlan2g" "WLAN2G" "mercury:green:wlan2g" "phy1tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "mercury:green:wlan5g" "phy0tpt"
ucidef_set_led_switch "lan3" "LAN3" "buffalo:green:lan3" "switch0" "0x08"
ucidef_set_led_switch "lan4" "LAN4" "buffalo:green:lan4" "switch0" "0x10"
;;
+wifi-pineapple-nano)
+ ucidef_set_led_wlan "wlan0" "WLAN0" "$board:blue:system" "phy0tpt"
+ ;;
wlae-ag300n)
ucidef_set_led_netdev "wireless" "WIRELESS" "buffalo:green:wireless" "wlan0"
;;
unifi|\
unifiac-lite|\
wi2a-ac200i|\
+ wifi-pineapple-nano|\
wndap360|\
wp543)
ucidef_set_interface_lan "eth0"
e600gac-v2|\
eap120|\
minibox-v1|\
+ packet-squirrel|\
som9331|\
sr3200|\
tl-wr802n-v2|\
r36a)
status_led="$board:blue:status"
;;
- e600g-v2)
+ e600g-v2|\
+ wifi-pineapple-nano)
status_led="$board:blue:system"
;;
eap300v2)
jwap230)
status_led="$board:green:led1"
;;
+ lan-turtle)
+ status_led="$board:orange:system"
+ ;;
ls-sr71)
status_led="ubnt:green:d22"
;;
*"JWAP230")
name="jwap230"
;;
+ *"LAN Turtle")
+ name="lan-turtle"
+ ;;
*"Lima"*)
name="lima"
;;
*"Oolite V1.0")
name="oolite"
;;
+ *"Packet Squirrel")
+ name="packet-squirrel"
+ ;;
*"PB42")
name="pb42"
;;
*"WHR-HP-GN")
name="whr-hp-gn"
;;
+ *"WiFi Pineapple NANO")
+ name="wifi-pineapple-nano"
+ ;;
*"WLAE-AG300N")
name="wlae-ag300n"
;;
el-m150|\
el-mini|\
gl-inet|\
+ lan-turtle|\
mc-mac1200r|\
minibox-v1|\
omy-g1|\
omy-x1|\
onion-omega|\
oolite|\
+ packet-squirrel|\
re355|\
re450|\
rut900|\
tl-wr940n-v4|\
tl-wr941nd|\
tl-wr941nd-v5|\
- tl-wr941nd-v6)
+ tl-wr941nd-v6|\
+ wifi-pineapple-nano)
local magic_ver="0100"
case "$board" in
# CONFIG_ATH79_MACH_JA76PF is not set
# CONFIG_ATH79_MACH_JWAP003 is not set
# CONFIG_ATH79_MACH_JWAP230 is not set
+# CONFIG_ATH79_MACH_LAN_TURTLE is not set
# CONFIG_ATH79_MACH_LIMA is not set
# CONFIG_ATH79_MACH_MC_MAC1200R is not set
# CONFIG_ATH79_MACH_MR12 is not set
# CONFIG_ATH79_MACH_WEIO is not set
# CONFIG_ATH79_MACH_WHR_HP_G300N is not set
# CONFIG_ATH79_MACH_WI2A_AC200I is not set
+# CONFIG_ATH79_MACH_WIFI_PINEAPPLE_NANO is not set
# CONFIG_ATH79_MACH_WLAE_AG300N is not set
# CONFIG_ATH79_MACH_WLR8100 is not set
# CONFIG_ATH79_MACH_WNDAP360 is not set
# CONFIG_ATH79_MACH_JA76PF is not set
# CONFIG_ATH79_MACH_JWAP003 is not set
# CONFIG_ATH79_MACH_JWAP230 is not set
+# CONFIG_ATH79_MACH_LAN_TURTLE is not set
# CONFIG_ATH79_MACH_LIMA is not set
# CONFIG_ATH79_MACH_MC_MAC1200R is not set
# CONFIG_ATH79_MACH_MR12 is not set
# CONFIG_ATH79_MACH_WEIO is not set
# CONFIG_ATH79_MACH_WHR_HP_G300N is not set
# CONFIG_ATH79_MACH_WI2A_AC200I is not set
+# CONFIG_ATH79_MACH_WIFI_PINEAPPLE_NANO is not set
# CONFIG_ATH79_MACH_WLAE_AG300N is not set
# CONFIG_ATH79_MACH_WLR8100 is not set
# CONFIG_ATH79_MACH_WNDAP360 is not set
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+config ATH79_MACH_WIFI_PINEAPPLE_NANO
+ bool "Hak5 WiFi Pineapple NANO support"
+ select SOC_AR933X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_WRT160NL
bool "Linksys WRT160NL board support"
select SOC_AR913X
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+config ATH79_MACH_LAN_TURTLE
+ bool "Hak5 LAN Turtle and Packet Squirrel support"
+ select SOC_AR933X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+
config ATH79_MACH_LIMA
bool "8devices Lima board"
select SOC_QCA953X
obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o
obj-$(CONFIG_ATH79_MACH_JWAP003) += mach-jwap003.o
obj-$(CONFIG_ATH79_MACH_JWAP230) += mach-jwap230.o
+obj-$(CONFIG_ATH79_MACH_LAN_TURTLE) += mach-lan-turtle.o
obj-$(CONFIG_ATH79_MACH_LIMA) += mach-lima.o
obj-$(CONFIG_ATH79_MACH_MC_MAC1200R) += mach-mc-mac1200r.o
obj-$(CONFIG_ATH79_MACH_MR12) += mach-mr12.o
obj-$(CONFIG_ATH79_MACH_WAM250) += mach-wam250.o
obj-$(CONFIG_ATH79_MACH_WEIO) += mach-weio.o
obj-$(CONFIG_ATH79_MACH_WHR_HP_G300N) += mach-whr-hp-g300n.o
+obj-$(CONFIG_ATH79_MACH_WIFI_PINEAPPLE_NANO) += mach-wifi-pineapple-nano.o
obj-$(CONFIG_ATH79_MACH_WLAE_AG300N) += mach-wlae-ag300n.o
obj-$(CONFIG_ATH79_MACH_WLR8100) += mach-wlr8100.o
obj-$(CONFIG_ATH79_MACH_WNDAP360) += mach-wndap360.o
--- /dev/null
+/*
+ * Hak5 LAN Turtle and Packet Squirrel boards support
+ *
+ * Copyright (C) 2018 Sebastian Kinne <seb@hak5.org>
+ * Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define LAN_TURTLE_GPIO_BTN_RESET 11
+#define LAN_TURTLE_GPIO_LED_SYS 13
+
+#define PACKET_SQUIRREL_GPIO_BTN_SW1 18
+#define PACKET_SQUIRREL_GPIO_BTN_SW2 20
+#define PACKET_SQUIRREL_GPIO_BTN_SW3 21
+#define PACKET_SQUIRREL_GPIO_BTN_SW4 24
+#define PACKET_SQUIRREL_GPIO_BTN_RESET 11
+#define PACKET_SQUIRREL_GPIO_LED_B 23
+#define PACKET_SQUIRREL_GPIO_LED_G 22
+#define PACKET_SQUIRREL_GPIO_LED_R 19
+
+#define HAK5_KEYS_POLL_INTERVAL 20 /* msecs */
+#define HAK5_KEYS_DEBOUNCE_INTERVAL (3 * HAK5_KEYS_POLL_INTERVAL)
+
+static const char *hak5_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data hak5_flash_data = {
+ .part_probes = hak5_part_probes,
+};
+
+/* LAN Turtle */
+static struct gpio_led lan_turtle_leds_gpio[] __initdata = {
+ {
+ .name = "lan-turtle:orange:system",
+ .gpio = LAN_TURTLE_GPIO_LED_SYS,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button lan_turtle_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = HAK5_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = LAN_TURTLE_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+};
+
+/* Packet Squirrel */
+static struct gpio_led packet_squirrel_leds_gpio[] __initdata = {
+ {
+ .name = "packet-squirrel:blue:system",
+ .gpio = PACKET_SQUIRREL_GPIO_LED_B,
+ .active_low = 1,
+ }, {
+ .name = "packet-squirrel:green:system",
+ .gpio = PACKET_SQUIRREL_GPIO_LED_G,
+ .active_low = 1,
+ }, {
+ .name = "packet-squirrel:red:system",
+ .gpio = PACKET_SQUIRREL_GPIO_LED_R,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button packet_squirrel_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = HAK5_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = PACKET_SQUIRREL_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "sw1",
+ .type = EV_KEY,
+ .code = BTN_0,
+ .debounce_interval = HAK5_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = PACKET_SQUIRREL_GPIO_BTN_SW1,
+ .active_low = 1,
+ }, {
+ .desc = "sw2",
+ .type = EV_KEY,
+ .code = BTN_1,
+ .debounce_interval = HAK5_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = PACKET_SQUIRREL_GPIO_BTN_SW2,
+ .active_low = 1,
+ }, {
+ .desc = "sw3",
+ .type = EV_KEY,
+ .code = BTN_2,
+ .debounce_interval = HAK5_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = PACKET_SQUIRREL_GPIO_BTN_SW3,
+ .active_low = 1,
+ }, {
+ .desc = "sw4",
+ .type = EV_KEY,
+ .code = BTN_3,
+ .debounce_interval = HAK5_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = PACKET_SQUIRREL_GPIO_BTN_SW4,
+ .active_low = 1,
+ },
+};
+
+static void __init hak5_common_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+
+ ath79_register_m25p80(&hak5_flash_data);
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_switch_data.phy_poll_mask = 0xfe;
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
+ ath79_register_eth(0);
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
+ ath79_register_eth(1);
+
+ ath79_register_usb();
+
+ /* GPIO11/12 */
+ ath79_gpio_function_disable(AR933X_GPIO_FUNC_UART_RTS_CTS_EN);
+}
+
+static void __init lan_turtle_setup(void)
+{
+ hak5_common_setup();
+
+ /* GPIO13 */
+ ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(lan_turtle_leds_gpio),
+ lan_turtle_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, HAK5_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(lan_turtle_gpio_keys),
+ lan_turtle_gpio_keys);
+}
+
+static void __init packet_squirrel_setup(void)
+{
+ hak5_common_setup();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(packet_squirrel_leds_gpio),
+ packet_squirrel_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, HAK5_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(packet_squirrel_gpio_keys),
+ packet_squirrel_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_LAN_TURTLE, "LAN-TURTLE",
+ "Hak5 LAN Turtle", lan_turtle_setup);
+
+MIPS_MACHINE(ATH79_MACH_PACKET_SQUIRREL, "PACKET-SQUIRREL",
+ "Hak5 Packet Squirrel", packet_squirrel_setup);
--- /dev/null
+/*
+ * Hak5 WiFi Pineapple NANO board support
+ *
+ * Copyright (C) 2018 Sebastian Kinne <seb@hak5.org>
+ * Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define WIFI_PINEAPPLE_NANO_GPIO_LED_SYSTEM 18
+
+#define WIFI_PINEAPPLE_NANO_GPIO_BTN_RESET 12
+#define WIFI_PINEAPPLE_NANO_GPIO_SD_DET 19
+#define WIFI_PINEAPPLE_NANO_GPIO_USB_ALARM 20
+#define WIFI_PINEAPPLE_NANO_GPIO_USB_POWER 23
+
+#define HAK5_KEYS_POLL_INTERVAL 20 /* msecs */
+#define HAK5_KEYS_DEBOUNCE_INTERVAL (3 * HAK5_KEYS_POLL_INTERVAL)
+
+#define WIFI_PINEAPPLE_NANO_MAC1_OFFSET 0x0006
+#define WIFI_PINEAPPLE_NANO_CALDATA_OFFSET 0x1000
+
+static const char *hak5_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data hak5_flash_data = {
+ .part_probes = hak5_part_probes,
+};
+
+static struct gpio_led wifi_pineapple_nano_leds_gpio[] __initdata = {
+ {
+ .name = "wifi-pineapple-nano:blue:system",
+ .gpio = WIFI_PINEAPPLE_NANO_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button wifi_pineapple_nano_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = HAK5_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WIFI_PINEAPPLE_NANO_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+static void __init wifi_pineapple_nano_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_m25p80(&hak5_flash_data);
+
+ ath79_setup_ar933x_phy4_switch(false, false);
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr,
+ art + WIFI_PINEAPPLE_NANO_MAC1_OFFSET, 0);
+ ath79_register_eth(0);
+
+ /* GPIO11/12 */
+ ath79_gpio_function_disable(AR933X_GPIO_FUNC_UART_RTS_CTS_EN);
+
+ gpio_request_one(WIFI_PINEAPPLE_NANO_GPIO_SD_DET,
+ GPIOF_IN | GPIOF_EXPORT_DIR_FIXED | GPIOF_ACTIVE_LOW,
+ "SD card present");
+
+ gpio_request_one(WIFI_PINEAPPLE_NANO_GPIO_USB_ALARM,
+ GPIOF_IN | GPIOF_EXPORT_DIR_FIXED | GPIOF_ACTIVE_LOW,
+ "USB alarm");
+
+ gpio_request_one(WIFI_PINEAPPLE_NANO_GPIO_USB_POWER,
+ GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED |
+ GPIOF_ACTIVE_LOW, "USB power");
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wifi_pineapple_nano_leds_gpio),
+ wifi_pineapple_nano_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, HAK5_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wifi_pineapple_nano_gpio_keys),
+ wifi_pineapple_nano_gpio_keys);
+
+ ath79_register_usb();
+ ath79_register_wmac(art + WIFI_PINEAPPLE_NANO_CALDATA_OFFSET, NULL);
+}
+
+MIPS_MACHINE(ATH79_MACH_WIFI_PINEAPPLE_NANO, "WIFI-PINEAPPLE-NANO",
+ "Hak5 WiFi Pineapple NANO", wifi_pineapple_nano_setup);
ATH79_MACH_JA76PF2, /* jjPlus JA76PF2 */
ATH79_MACH_JWAP003, /* jjPlus JWAP003 */
ATH79_MACH_JWAP230, /* jjPlus JWAP230 */
+ ATH79_MACH_LAN_TURTLE, /* Hak5 LAN Turtle */
ATH79_MACH_LIMA, /* 8devices Lima */
ATH79_MACH_MC_MAC1200R, /* MERCURY MAC1200R */
ATH79_MACH_MR12, /* Cisco Meraki MR12 */
ATH79_MACH_OMY_G1, /* OMYlink OMY-G1 */
ATH79_MACH_OMY_X1, /* OMYlink OMY-X1 */
ATH79_MACH_ONION_OMEGA, /* ONION OMEGA */
+ ATH79_MACH_PACKET_SQUIRREL, /* Hak5 Packet Squirrel */
ATH79_MACH_PB42, /* Atheros PB42 */
ATH79_MACH_PB44, /* Atheros PB44 reference board */
ATH79_MACH_PQI_AIR_PEN, /* PQI Air Pen */
ATH79_MACH_WHR_G301N, /* Buffalo WHR-G301N */
ATH79_MACH_WHR_HP_G300N, /* Buffalo WHR-HP-G300N */
ATH79_MACH_WHR_HP_GN, /* Buffalo WHR-HP-GN */
+ ATH79_MACH_WIFI_PINEAPPLE_NANO, /* Hak5 WiFi Pineapple NANO */
ATH79_MACH_WLAE_AG300N, /* Buffalo WLAE-AG300N */
ATH79_MACH_WLR8100, /* SITECOM WLR-8100 */
ATH79_MACH_WNDAP360, /* NETGEAR WNDAP360 */
CONFIG_ATH79_MACH_JA76PF=y
CONFIG_ATH79_MACH_JWAP003=y
CONFIG_ATH79_MACH_JWAP230=y
+CONFIG_ATH79_MACH_LAN_TURTLE=y
CONFIG_ATH79_MACH_LIMA=y
CONFIG_ATH79_MACH_MC_MAC1200R=y
CONFIG_ATH79_MACH_MR12=y
CONFIG_ATH79_MACH_WAM250=y
CONFIG_ATH79_MACH_WEIO=y
CONFIG_ATH79_MACH_WHR_HP_G300N=y
+CONFIG_ATH79_MACH_WIFI_PINEAPPLE_NANO=y
CONFIG_ATH79_MACH_WLAE_AG300N=y
CONFIG_ATH79_MACH_WLR8100=y
CONFIG_ATH79_MACH_WNDAP360=y
endef
TARGET_DEVICES += gl-usb150
+define Device/lan-turtle
+ $(Device/tplink-16mlzma)
+ DEVICE_TITLE := Hak5 LAN Turtle
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage \
+ -kmod-ath9k -swconfig -uboot-envtools -wpad-mini
+ BOARDNAME := LAN-TURTLE
+ DEVICE_PROFILE := LANTURTLE
+ TPLINK_HWID := 0x5348334c
+ CONSOLE := ttyATH0,115200
+ IMAGES := sysupgrade.bin
+endef
+TARGET_DEVICES += lan-turtle
+
define Device/lima
DEVICE_TITLE := 8devices Lima
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
endef
TARGET_DEVICES += cr5000-nocloud
+define Device/packet-squirrel
+ $(Device/tplink-16mlzma)
+ DEVICE_TITLE := Hak5 Packet Squirrel
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 \
+ -kmod-ath9k -swconfig -uboot-envtools -wpad-mini
+ BOARDNAME := PACKET-SQUIRREL
+ DEVICE_PROFILE := PACKETSQUIRREL
+ TPLINK_HWID := 0x5351524c
+ CONSOLE := ttyATH0,115200
+ IMAGES := sysupgrade.bin
+endef
+TARGET_DEVICES += packet-squirrel
+
define Device/pqi-air-pen
DEVICE_TITLE := PQI Air Pen
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage
endef
TARGET_DEVICES += wam250
+define Device/wifi-pineapple-nano
+ $(Device/tplink-16mlzma)
+ DEVICE_TITLE := Hak5 WiFi Pineapple NANO
+ DEVICE_PACKAGES := kmod-ath9k-htc kmod-usb-core kmod-usb2 kmod-usb-storage \
+ -swconfig -uboot-envtools
+ BOARDNAME := WIFI-PINEAPPLE-NANO
+ DEVICE_PROFILE := WIFIPINEAPPLENANO
+ TPLINK_HWID := 0x4e414e4f
+ CONSOLE := ttyATH0,115200
+ IMAGES := sysupgrade.bin
+endef
+TARGET_DEVICES += wifi-pineapple-nano
+
define Device/wlr8100
DEVICE_TITLE := Sitecom WLR-8100
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-usb3 \
projects / openwrt / staging / lynxis.git / commitdiff